Panasonic WV-Q174
Contents
1. Panasonic Ceiling Mount Bracket Operating Instructions vino WV Q174 WV Q174E Before attempting to connect or operate this product please read these instructions carefully and save this manual for future use The model number is abbreviated in some descriptions in this manual Ns0810 3012 8TROO6706DZA Printed in China This ceiling embedded bracket is exclusively designed to mount a color CCTV camera or a network camera Refer to the catalog or the operating instructions of the camera for supported cameras This bracket is an embedded type to reduce the exposed portion of the camera body Precautions Refer installation work to the dealer Installation work requires technique and experiences Failure to observe this may cause fire electric shock injury or damage to the product e Be sure to consult the dealer Use only the specified camera Failure to observe this may cause a fall of an inappropriate camera resulting in injury or acci dents e Refer to the catalog or the operating instructions of the camera for supported cameras e Select an installation area that can support the total weight If a selected area is too weak to support the total weight a fall of the product may occur resulting in injury e Installation work shall be started after sufficient reinforcement Avoid installing this bracket in the locations where salt damage occurs or corrosive gas is produced Otherwise the mounting portions will deteriora2. ient temperature of the camera in use and this product Locations subject to vibrations This product is not designed for on vehicle use Locations where the temperature may rapidly change such as the peripheral areas of the air outlets of air conditioners or doors facing outside In case of installing the camera in such ocations the dome cover may become foggy or condensation may be caused on the cover e The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area After tightening the screws or bolts perform visual check to ensure tightening is enough and there is no backlash Tse lieliceats Be sure to read Precautions before installation It is recommended to read them while referring the operating instructions of the camera together 1 Make a hole of 160 mm 6 5 16 inches diameter using a specialized tool etc When it is impossible to make a precise hole since no specialized tool is at hand or when it is impossible to use it because of the loca tion trace the hole shape using the provid ed template Important e Make a hole precisely When the opened hole is bigger or deformed too much the ceiling mount bracket cannot be stuck on the ceiling board securely 2 Position two of the spring hooks of the camera as shown in the illustration below When the ceiling mount bracket is installed after positioning them in the opposite side they
3. may become hard to pull out O t Move the hook head downward Spring hook 3 Fix the ceiling mount bracket onto the ceiling board Loosen the clamping screws until the length between the clamp plates becomes wider that the thickness of the ceiling board and then clamp the ceiling board by tightening the clamping Screws Triangle mark The Panasonic logo on the camera should be located on the side of this triangle mark Clamp the Maximum thickness of the ceiling board ceiling board is 30 mm 1 3 16 inches for installation Clamp plates Clamping screw Recommended tightening torque 0 58 N m 0 43 Ibf ft Important e When the ceiling board is the plasterboard make sure that no crack was made on the ceiling board by clamping 4 Connect the cables to the camera Refer to the operating instructions of the camera 5 1 When the four mounting holes fix the camera using four fixing screws acces sory Before fixing the camera make sure that the direction marker for installation on the cam era body is correctly positioned Important e This triangle mark and the arrow tip TOP of the direction marker for installation on the camera body should be located on the opposite sides Dome cover Fixing screw standard accessory Recommended tightening torque 1 57 Nem 1 16 lbf ft 1 p Dome cover fixing screw To be continued to the reverse page Installati
4. ny of North America Unit of Panasonic Corporation of North America www panasonic com business Panasonic Testing Centre For customer support call 1 800 528 6747 4 Three Panasonic Way Secaucus New Jersey 07094 U S A r te etas Hel T EE Importer s name and address to follow EU rules Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 Canada 905 624 5010 www panasonic ca Panasonic System Networks Co Ltd 2012
5. ons continued 5 2 When the two mounting holes fix the two adjustment plates using four fixing screws accessory And fix the camera using two fixing screws accessory Before fixing the camera make sure that the direction marker for installation on the cam era body is correctly positioned Important e This triangle mark and the arrow tip TOP ae of the direction marker for installation on the 5 camera body should be located on the opposite sides a a Do not pass the cables through the hole of a Fixing screw N the main body standard accessory Take care so that the cables do not touch Recommended 4 the edges of the main body tightening torque 1 57 N m 1 16 lbf ft Camera body 6 Adjust the angular field of view and attach the dome cover to the camera Refer to the operating instructions of the camera Adjust the angular field of view and the focus Fixing screw Dome cover standard accessory Attach the dome cover to the camera Recommended i i tightening torque Fix the dome cover using the dome tight Neer 1S biti cover fixing screw Dome cover fixing screw 7 According to your need set the auto focus adjustment This procedure is required only for a camera that has the auto focus function Auto focus adjustment becomes available by pushing the AF button Do the following to use the auto focus func tion Refer to the operating inst
6. ructions of the camera for further information Auto focus adjustment becomes available by pushing the AF button with the provided AF button push tool even after mounting the dome cover In such a case the direction of the camera and the presence of the object should be checked beforehand because visual check is not available on the monitor Attach the decorative cover Push the AF button with the provided AF button push tool LOCK position AF button push tool Pull out both the spring hooks and attach the hooks to the decorative cover Make sure that the cover is attached to the ceiling with no space between them Decorative cover Match the Panasonic logos on the cover and on the camera Specifications Ambient temperature 10 C to 50 C 14 F to 122 F Dimensions 2186 mm 7 5 16 inches embedding depth 55 mm 2 5 32 inches Mass Approx 310 g 0 68 lbs Standard Accessories Operating instructions this document 1 pc AF button push tool screener 1 pc The following are for installation Fixing screw M4 X 8 eeceeeteeeeteteeeetteeenereens 8 pcs incl 2 spare screws Adjustment plate cccecccceeeeseeeeesneeeseeeesees 2 pcs Template for tracing the hole shape 0 1 sheet For U S and Canada For Europe and other countries Panasonic Corporation http panasonic net Panasonic System Communications Compa
7. te and accidents such as a fall of the camera may occur e The screws and fixation mechanisms shall be tightened securely Failure to observe this may cause a fall of the camera resulting in injury Periodic inspections shall be conducted Rust on the metal parts or screws may cause a fall of the product resulting in injury e Consult the dealer for the inspections Do not rub the edges of metal parts with your hand Failure to observe this may cause injury Make sure that the installation area is strong enough to hold the total weight of the camera assembly before installation The ceiling mount bracket can be installed only when there is a space whose height is 70 mm or more above a ceiling board The ceiling mount bracket can be installed on a ceiling board whose thickness is 30 mm or less The camera and the ceiling mount bracket should be fixed using the provided fixing screws and make sure that the both of them are fixed firmly e When the ceiling mount bracket is not necessary anymore remove from the ceiling e Avoid installing in the following locations e Locations where it may get wet from rain or water splash not only outdoor Locations where a chemical agent is used such as a swimming pool Locations subject to steam and oil smoke such as a kitchen Locations where radiation or x ray emissions are produced Locations where it may be damaged by briny air such as seashores Locations where the temperature is not within the amb
Download Pdf Manuals
Related Search