Gamber-Johnson PocketJet
Contents
1. INSTALLATION INSTRUCTIONS Product Date Form 7160 0126 3 31 08 INST 388 PENTAX PRINTER MOUNT Mounting the Pentax Printer Mount to a Gamber Johnson DS 74 mounting bracket 1 Attach the printer mount to a DS 74 with the 10 32unc x 3 8 long screws and split lock washers provided in hardware bag 7120 0427 There are multiple hole locations on the bottom of the printer mount and in the DS 74 mounting bracket so use the holes that will best locate the printer mount for your specific application 2 The printer mount comes with a cable strain relief bracket located in the hardware bag If your specific application has room to mount the strain relief bracket you can do so with the 6 32unc x 1 4 nylon patch screws found in the hardware bag Pentax Printer Mount M 6 32unc x 1 4 DS 74 mounting nylon patch screws bracket Strain Relief Bracket 10 32unc x 3 8 Screws and Lock Washers Product Mounting Disclaimer Gamber Johnson is not liable under any theory of contract or tort aw for any loss damage personal inury special incidental or consequential damages for personal injury or other damage of any nature arising directly or indirectly asa result of the improper installation or use of its products in vehicle or any other application In order to safely install and use Gamber Johnson products full consideration of vehicle occupants vehicle systems i e the location of fuel lines brakes lines electrical drive t2. rain or other systems air bags and other safety equipment is required Gamber Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications and recommendations Gamber Johnson product instruction sheets or workmanship standards as endorsed through the Gamber Johnson Certified Installer Program If you need assistance or have questions call Gamber Johnson at 1 800 456 6868 Installing the Pentax Printer 1 Insert the paper roll spindle into the paper roll then place the roll into the printer mount The paper should roll off the top of the roll toward the printer See figures 1 amp 2 2 Plug the wires into the Pentax printer and insert into the mount The left side of the printer slides under the tab on the left side of the mount The printer will then nest inside the formed flanges on the mount base The top cover will hold the printer in place See figures 3 amp 4 FIGURE 1 FIGURE 2 FIGURE 4
Download Pdf Manuals
Related Search