Philips Hospitality LED TV 32HFL4663D
Contents
1. This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 4 inches 10cm or more around this apparatus Press D to turn the unit on and go into standby mode To completely turn off the unit you must unplug the AC power cord Disconnect the AC plug to shut the unit off when trouble is found or not in use The AC plug shall remain readily available Never use a gas duster on this TV The gas trapped inside of this unit may cause ignition and explosion CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNING Batteries battery pack or battery installed shall not be exposed to excessive heat such as sunshine fire or the like WARNING To prevent injury this apparatus must be securely attached to the furniture wall in accordance with the instructions Tipping shaking or rocking the unit may cause injury death Environmental care we The packaging of this product Is intended to be recycled Contact your local authorities for information about how to recycle the packaging For product recycling information please visit www recycle philips com End of life directives Philips pays a lot of attention to produce environment friendly products in green focal areas Your new TV contains materials which can be recycled and reused At the end of its2. their respective owners The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries HOME HIGH DEFINITION MULTIMEDIA INTERFACE Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories SIS is a trademark of SRS Labs Inc TruSurround HD technology is incorporated under license from SRS Labs Inc SRS TruSurround HD creates an immersive feature rich surround sound experience from two speakers complete with rich bass high frequency detail and clear dialog ENERGY STAR is a joint program of the U S Environmental Protection Agency and the U S Department of Energy helping us all save money and protect the environment through energy efficient products and practices DOLBY DIGITAL SIS TruSurround HD ENERGY STAR Consumer Notice This TV has been set to maximize energy efficiency while delivering the best possible picture using the factory installed home mode settings Changing or enabling other features In this TV e g brightened backlighting will possibly increase energy consumption beyond the original ENERGY STAR qualified limits Portions of this software are copyright O The FreeType Project www freetype org The American Academy of Pediatrics discourages television viewing for children younger
3. Channel Input Channel Logo Digital RF Channel Number MPEG Program Number Rings Label and Mute 4 Select the Current Ring Configuration menu This section describes how to change the TV general performance settings Switch On settings and Control settings 1 Press MENU on the setup remote control to display the setup menu 2 Press a W to select the desired mode then press OK Defines property information Hotel Info Hotel name and Room ID Defines the parameters loaded when the TV is Switch On switched On and the OSD behavior and OSD Welcome Message Switch On Program and Channel Display Volume Defines the Volume and Volume OSD behavior Settings Volume Indicator Max Volume and Switch On Volume t ci Enable disable various interfaces and controls USB Keyboard Remote Control AV Inputs and Auto Sensing Settings Defines the TV standby and Eco power as well as the Power On mode StandBy Mode Power On and Eco Power Power Settings Configure standard TV settings This menu will allow the configuration of the standard TV parameters Options Language Picture Sound Caption settings Child Lock EasyLink Use of Slideshow application The slideshow application will enable a basic signage mode 1 Insert the USB stick with the graphic files 2 Press MENU on the setup remote control to display the setup menu UJ Select Applications or Slideshow Fo
4. Philips authorized agent or dealer Installation of pay per view box This section describes how to install a external pay per view box Step 1 Set the communication mode You must setup the correct communication protocol before you connect the Pay per View box to the TV This section describes how to select the communication mode 1 Press MENU on the setup remote control to display the setup menu 2 Select SPI and the appropriate option 3v3 5v Step 2 Set the communication mode Note e Turn off your TV before you connect the pay per view box 1 Insert the RJ12 cable of the Pay per View box into the RJ12 connector of the TV Connect the other cables as directed by the Pay per View provider After completing the connections of the cable turn on the TV 2 3 4 Press RECALL on the setup remote control and check that the status of SPI ONLINE in page 4 Multi RC Multi RC enables control of multiple TVs in a room without any Interference from each other s remote control To enable Multi RC each remote control is set to one of the four colors Blue Green Yellow or Red Each TV in the room is separately programmed to a remote control of one of those colors In this way each TV responds to only one RC that Is set to the same color as the TV itself This prevents interference from each other s remote control when you watch multiple TVs in a room 1 Press MENU on the setup remote control to
5. is required select the desired language 1 Press MENU on the setup remote control to display the setup menu 2 Select Settings 3 Select the preferred language TV system If TV is part of a PPV Pay Per View system 1 Press MENU on the setup remote control to display the setup menu 2 Select System 3 Select SPI 4 Select the correct SPI mode 3v3 5V If the TV will be used in FTG Free To Guest mode Skip if the TV is in PPV mode 1 Press MENU on the setup remote control to display the setup menu Select System Select Pro ldiom Control Select Mode Select FTG Enter the correct pass code O Ui BR WN Install TV Channels Skip if the TV is in PPV mode 1 Press MENU on the setup remote control to display the setup menu Select Channels Select Installation mode and the required installation mode Antenna Cable 4 If auto installation is required select Auto program and Start If manual installation is preferred select Manual setup and the correct parameters After the initial setup the TV can be further configured to achieve the desired behavior A summary of available options is described in the following sections Channel setting setup This section describes how to change the channel settings The TV must be in FTG mode for the channel settings to be available 1 Press MENU on the setup remote control to display the setup menu 2 Select Channels 3 Manual setup options
6. than two years of age 2 Important Positioning the TV e Large screen TVs are heavy 2 people are required to carry and handle a large screen TV e Make sure to hold the upper and bottom frames of the unit firmly as illustrated e Install the unit in a horizontal and stable position e Do not install the unit in direct sunlight or in a place subject to dust or strong vibration e Depending on the environment the temperature of this unit may increase slightly This is not a malfunction e Avoid a place with drastic temperature changes e Do not place anything directly on top or bottom of the unit e Depending on your external devices noise or disturbance of the picture and or sound may be generated if the unit is placed too close to them In this case please ensure enough space between the external devices and the unit e Do not insert the AC power cord into the power socket outlet before all the connections are made e Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power e Before you move the TV disconnect attached cables to prevent damage to connectors e Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit Regulatory notices Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling unit can cause serious injury or even death
7. to the flat panel display so that they cannot be pulled or grabbed by curious children WALL MOUNTING IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY ALWAYS e Use a mount that has been recommended by the display manufacturer and or listed by an independent laboratory such as UL CSA ETL e Follow all instructions supplied by the display and wall mount manufacturers e If you have any doubts about your ability to safely install your flat panel display contact your retailer about professional installation e Make sure that the wall where you are mounting the display is appropriate A Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction 6 ay If you are unsure contact a professional installer iw e A minimum of two people are required for installation Flat panel displays can be heavy Consumer Electronics Association www CE org safety Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s Instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized p
8. EEP RCSGUEST RC5SETUP RC6GUEST RC6SETU D BD PHILIPS HOSPITALITY Channel installation This section describes how to install the TV channels automatically 1 Connect the RF signal to the TV 2 Plug the power cord into the power outlet 3 TumtheTV on e Press D POWER at the front of the TV or use the b POWER on the remote control MENU O SOURCE 4 Press RC5 SETUP to put the remote control into setup mode then press the HOME MENU button to display the setup menu Hereafter HOME MENU will be simply referred to as MENU 5 Select Setup Menu Channels Autoprogram then select Cable unless the installation is using only Antenna signals in which case you would select Antenna 4 1 DATA RJ 12 SPI port 2 Digital audio output jack 3 IP Control port 4 Antenna Input jack 5 PC Input jack 6 USB terminal 7 HDMI Input jack s Audio input jack for PC connection 9 Audio Video Input jack Installation Note e As part of the initial TV setup there is PC application to support the installation The application that can be downloaded at www philips com hospitality or contact Philips agent representative this tool is subject to availability In the 1st time Virgin installation the following steps should be followed Language If Language other than English
9. Quick Start Setup Guide 32HFL4663D PHILIPS Know these safety symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of ef 0 mae N A uninsulated dangerous voltage within the apparatus s enclosure RISK OF ELECTRIC SHOCK that may be of sufficient magnitude to constitute a risk of DO NOT OPEN electric shock to persons CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT The exclamation point within an equilateral triangle is intended to REMOVE COVER OR BACK NO USER SERVICEABLE PARTS alert the user to the presence of important operating and INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL maintenance servicing instructions in the literature accompanying the apparatus The caution marking is located on the rear or bottom of the cabinet WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond PHILIPS _ Visit our World Wide Web Site at www philips com hospitality CHILD SAFETY Congratulations on your purcha
10. ardware Stand to TV screws x 3 Stand pin x2 Screw for Stand pin x 4 e TV security package Stand to TV security hex screws x 3 e Security bolt and cap x 2 e Washer x 2 e Security nut x 2 e Security double sided tape x 4 Note e The items are available on selected models only e An optional security tool is required to tighten the security screws and nuts Please contact your Philips authorized agent or distributor to purchase the tool TV Setup Philips Hospitality TVs have a USB cloning capability so you only need to manually setup one TV the master TV Then the complete setup configuration can be copied from the master TV to a USB storage device which can then be used to load the same setup configuration into all other TVs Step 1 is to setup the master TV as follows Accessing the setup menu To access and adjust the setup functions YOU MUST USE A SPECIAL SETUP REMOTE CONTROL not provided with the TV IN THE RC5 SETUP MODE All the following instructions assume the use of a setup remote control in the RC5 Setup mode Note e The optional setup remote control is not included in the box Contact your Philips authorized agent or dealer to purchase the setup remote control Setup remote control might differ from the illustration A B c Ss G RESET UPGRADE Gap a RECALL INFO GUIDE BACK PP D E WXYZ 9 SL
11. display the setup menu Select System 2 3 Select MultiRC and the correct color code 4 Press AW lt P to select Select a color code e The TV is configured to respond to the RC that is set to the same color 5 On the guest RC press HOME the menu button and the color button same color as above simultaneously for at least 5 seconds e The guest RC is set to the selected color a vo e The Guest RC defaults to Blue and a remote which has been set to any color can operate any TV which has not been configured to a different color yet Therefore if 2 TVs are being configured in the same space then each TV RC pair MUST be set a their own color one pair cannot be left as default otherwise both RCs will operate the TV which has not been configured Watch your video on a USB storage device 1 Connect your USB storage device to the TV 2 Press MENU on the remote control to display the guest menu 3 Select Browse USB 11 PHILIPS P amp F USA Inc PO Box 430 Daleville IN 47334 0430 P amp F Mexicana S A de C V Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Edo de M xico C P 52787 Philips and Philips Shield are used under license of Koninklijke Philips Electronics N V Printed in China TEMN30350A xxx x 1 EMN30350A
12. e Bracket on your own The Wall Mount Bracket must be installed by experts Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged In any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS TD ELECTRIC SERVICE EQUIPMENT POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H P amp F USA is not liable for these types of accidents or injury noted below e Install the Wall Mount Bracket on a sturdy vertical wall Ifinstalled onto a ceiling or slanted wall the TV and Wall Mount Bracket may fall which could result in a severe injury Do not use screws that a
13. he content in this document Errors reported to P amp F USA will be adapted and published on the P amp F USA support website as soon as possible Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Service Centers and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If thi
14. life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of Please ensure you dispose of your old TV according to local regulations Disposal of used batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations How to use this guide The Quick Start Setup Guide helps you install the Philips commercial television as quickly as possible It contains the necessary information to install the TV and configure the settings Read and understand the instructions in the Quick Start Setup Guide before you use your TV For detailed information on additional features download the user manual by selecting your TV model at www philips com hospitality The Quick Start Setup Guide contains the following information e Contents of the box e Configuration of channel and advanced settings e Cloning of data As part of striving to improve the TV performance throughout the product life some TV menus may differ from the illustration on this document The contents of the box The box contains the following items e TV e TV stand e Quick Start Setup Guide this document e Warranty sheet Remote control e 2 x AAA 1 5V batteries e Cable management tie e TV stand h
15. lug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over So oe TO Wall Mount Bracket Kit Brand SANUS Model Screw dimension 32HFL4663D VM200s M4 x 0 472 12mm NOT use screws packed with Wall Mount Bracket Kit You need to purchase screws separately with dimensions described above The recommended Wall Mount Bracket Kit sold separately allows the mounting of the TV on the wall For detailed information on installing the wall mount refer to the Wall Mount Instruction Book P amp F USA Is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV Wall Mount Bracket or mount the TV onto th
16. r testing and fine tuning select Run from USB The TV will start displaying the files with the parameters configured in the Slideshow menu When all is confirmed select Copy to TV The graphic files will be copied to the TV memory Select Configuration Switch On and OSD Switch On Program or Slideshow in the main setup menu Next time the TV will switch On will automatically start the slideshow application Configure the upgrading and cloning settings This section allows the Installer to configure the auto upgrading feature or to perform a manual upgrade or cloning If set to Off the Auto Upgrade is disabled Otherwise the TV will automatically check for new upgrades at the specified time interval and RF channel and upgrade the TV software assets clone data P l keys accordingly Selecting Direction From TV or To TV will trigger a manual upgrade cloning with the configured parameters You can clone copy the configuration data from a USB storage or RF channel to a TV or vice versa TV to USB only This enables you to bypass the setup menu and configure multiple TVs by simply using the USB storage device or RF channel Note e When selecting RF and its respective parameter ensure that this is the channel that will be used to stream the data and it Is not used by any video channel e RF cloning upgrading must be used with a Gateway Network Appliance GNA device For more information on the GNA contact your
17. re longer or shorter than their specified length If screws too long are used this may cause mechanical or electrical damage inside the TV set If screws too short are used this may cause the TV set to fall Do not fasten the screws by excessive force This may damage the product or cause the product to fall leading to an injury For safety reasons use 2 people to mount the TV onto a Wall Mounting Bracket Do not mount the TV onto the Wall Mounting Bracket while your TV is plugged in or turned on It may result in an electrical shock injury When installing the unit on the wall allow this much space Top 11 8 inches 30cm Left and right side 5 9 inches 15cm Bottom 3 9 inches 10cm 1 Notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners P amp F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained P amp F USA warrants that the material itself does not infringe any United States patents No further warranty Is expressed or implied P amp F USA cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of t
18. s equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Declaration of Conformity Trade Name PHILIPS Responsible Party P amp F USA Inc Model 32HFL4663D Address PO Box 430 Daleville IN 47334 0430 U S A Telephone Number 1 866 497 4225 Modifications This apparatus may generate or use radio frequency energy Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual The user could lose the authority to operate this apparatus if an unauthorized change or modification is made Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice This Class B digital apparatus complies with Canadian ICES 003 Standard Television Receiving Apparatus Canada BETS 7 NTMR 7 Copyright All other registered and unregistered trademarks are the property of
19. se It Makes A Difference How and Where As you enjoy your new product You Use Your Flat Panel Disp oor paket a et a please keep these safety tips in mind THE ISSUE e The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases However flat panel displays are not always supported on the proper stands or installed according to the manufacturer s recommendations e Flat panel displays that are inappropriately situated on dressers bookcases shelves desks speakers chests or carts may fall over and cause injury THIS MANUFACTURER CARES e The consumer electronics industry is committed to making home entertainment enjoyable and safe TUNE INTO SAFETY e One size does NOT fit all Follow the manufacturer s recommendations for the safe installation and use of your flat panel display Caretully read and understand all enclosed instructions for proper use of this product e Do not allow children to climb on or play with furniture that the television set is sitting on or mounted to e Don t place flat panel displays on furniture that can easily be used as steps such as a chest of drawers e Remember that children can become excited while watching a program especially on a larger than life flat panel display Care should be taken to place or install the display where it cannot be pushed pulled over or knocked down e Care should be taken to route all cords and cables connected
Download Pdf Manuals
Related Search