Philips Soundbar speaker HTL2160
Contents
1. When you change the batteries always keep all new and used batteries out of reach of children Ensure that the battery compartment is completely secure after you replace the battery f the battery compartment cannot be completely secured discontinue use of the product Keep out of reach of children and contact the manufacturer Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus for example liquid filled objects lighted candles This apparatus may contain lead and mercury Dispose according to local State or Federal laws For disposal or recycling information please contact your local authorities For additional assistance on recycling options please contact www mygreenelectronics com or www elae org or www recycle philips com Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable e Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling apparatus can cause serious injury or even death e This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 7 8 inches 20cm or more around this apparatus Class Il equipment symbol This symbol indicates that the unit has a double2. e Specifications and design are subject to change without notice Amplifier e FTC total output power 31W e Left Right 16W 1 THD 4ohm 150Hz 20kHz e Subwoofer 15W 1 THD 80hm 40Hz 150Hz e Total output power 60W RMS 0 5 dB 10 THD e Frequency response 20 Hz 20 kHz 3 dB Signal to noise ratio gt 65 dB CCIR A weighted e Input sensitivity e AUX 2V e AUDIO IN 1V Audio e S PDIF Digital audio input Coaxial IEC 60958 3 Optical TOSLINK USB e Compatibility Hi Speed USB 2 0 e Class support USB Mass Storage Class MSC e File system FAT16 and FAT32 Supports MP3 and WMA file formats Sampling frequency e MP3 8 kHz 11 kHz 12 kHz 16 kHz 22 kHz 24 kHz 32 kHz 44 1 kHz 48 kHz e WMA 44 1 kHz 48 kHz Constant bit rate e MP3 8 kbps 320 kbps e WMA 64 kbps 192 kbps e Version WMA V7 V8 V9 Bluetooth e Bluetooth profiles A2DP e Bluetooth version 2 1 EDR Main unit e Power supply 120V 60Hz Power consumption 30 WV Standby power consumption lt 0 5 W e Speaker impedance 8 ohm Tweeter 4 ohm Woofer e Frequency response 160 Hz 20 kHz Dimensions WxHxD 800 x 75 6 x 52 4 mm e Weight 1 2 kg e Operating temperature and humidity 0 C to 40 C 5 to 90 Humidity for all climates e Storage temperature and humidity 40 C to 70 C 5 to 95 Subwoofer e Impeda
3. Para obtener informaci n de productos de reciclaje por favor visite www recycle philips com Pour tout renseignement sur le recyclage des produits veuillez visiter www recycle philips com ar USA e PHILIPS Contents 1 Important 4 Help and support 4 Important safety instructions 4 Care for your product 6 Care of the environment 6 2 Your SoundBar 6 Assemble your Soundbar 6 Main unit 6 Remote control 7 Connectors 7 3 Connect 8 Placement 8 Connect audio from TV and other devices 9 4 Use your SoundBar 10 Adjust the volume 10 Choose your sound 10 MP3 player 10 USB storage devices 10 Play audio through Bluetooth 11 Apply factory settings 11 5 Wall mount 12 6 Product specifications 12 7 Troubleshooting 13 8 Notice 14 Notice of compliance 14 Trademarks 15 EN English 1 Important Read and understand all instructions before you use your product If damage is caused by failure to follow instructions the warranty does not apply Help and support Philips provides extensive online support Visit our website at www philips com support to e download the user manual and the quick start guide e watch video tutorials available only for selected models e find answers to frequently answered questions FAQs e email us a question e chat with our support representative Follow the instructions on the website to select your language and then enter your product mo
4. Alpharetta GA 30023 2248 1 866 310 0744 Canada This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following Two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus complies with Canadian ICES 003 Trademarks DU DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Philips is under license EN English ONE 1 YEAR LIMITED WARRANTY WARRANTY COVERAGE This warranty obligation is limited to the terms set forth below WHO IS COVERED This product is warranted to the original purchaser or the per son receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase Warranty Period from an Authorized Dealer The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof WHAT IS COVERED This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period At its option the company will either 1
5. insulation system This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features for which you should read the enclosed iterature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert EN 5 English Care for your product Use only microfiber cloth to clean the product Care of the environment wb Your product is designed and manufactured with high quality materials and components which can be recycled and reused Please visit www recycle philips com for additional information on a recycling center in your area lever dispose of your product with other household waste Please inform yourself about he local rules on the separate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on he environment and human health The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batter
6. repair the product at no charge using new or refurbished replacement parts or 2 exchange the product with a product that is new or which has been manufactured from new or ser viceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory or 3 refund the original purchase price of the product The company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety 90 days or for the remaining portion of the original product s warranty whichever provides longer coverage for you When a product or part is exchanged any replacement item becomes your property and the replaced item becomes the company property When a refund is given your product becomes the company property Note Any product sold and identified as refurbished or renewed carries a ninety 90 day limited warranty Replacement product can only be sent if all warranty requirements are met Failure to follow all requirements can result in delay WHAT IS NOT COVERED EXCLUSIONS AND LIMI TATIONS This Limited Warranty applies only to the new products that can be identified by the trademark trade name or logo affixed to it This Limited Warranty does not apply to any non Philips hardware product or any software even if packaged or sold with the product Non Philips manufacturers suppliers or publish
7. tent for extended periods product cosmetic appearance items due to normal wear and tear unauthorized repair or other cause not within the control of the company Damage or claims for products not being available for use or for lost data or lost software Damage from mishandled shipments or transit accidents when returning product A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications A product used for commercial or institutional purposes including but not limited to rental purposes Product lost in shipment and no signature verification receipt can be provided Failure to operate per Owner s Manual TO OBTAIN ASSISTANCE IN THE U S A CANADA PUERTO RICO OR U S VIRGIN ISLANDS Contact Customer Care Center at 1 866 310 0744 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON SUMER PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD UCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY Some states do not allow the exclusions or limitation of inciden tal or conse
8. For product support visit Para obtener asistencia t cnica visite Pour en savoir plus sur l assistance sur les produits visitez le site www hd philips com HTL2160 User manual 3 Manuel d utilisation 35 Manual del usuario 17 EN For further assistance call the customer support service in your country e To obtain assistance in the U S A Canada Puerto Rico or the U S Virgin Islands contact Philips Customer Care Center at 1 866 310 0744 To obtain assistance in Mexico contact Philips Customer Care Center at 01 800 839 1989 exico city 5887 9736 Para obtener mas informacion llame al servicio de soporte al cliente de su pais ara obtener asistencia en los Estados Unidos en Canada Puerto Rico o en las Islas Virgenes de los Estados Unidos comuniquese con Centro de atencion al cliente de Philips al 1 866 310 0744 Solo para Mexico CENTRO DE ATENCION A CLIENTES LADA 01 800 839 1989 Solo Para Mexico exico city 5887 9736 FR Pour obtenir de l aide supplementaire communiquez avec le centre de service a la clientele de votre pays e Pour obtenir de l aide aux Etats Unis au Canada a Puerto Rico ou aux lles Vierges americaines communiquez avec le centre de service a la clientele Philips au 1 866 310 0744 e Pour obtenir l aide au Mexique entrez en contact avec le centre de soin de client de Philips a 01 800 839 1989 exico city 5887 9736 For Product recycling information please visit www recycle philips com
9. SB storage device while it is being read DRM protected music files MP3 WMA are not supported e Support a USB port 5V 500mA Play audio through Bluetooth Through Bluetooth connect the SoundBar with your Bluetooth device such as an iPad iPhone iPod touch Android phone or laptop and then you can listen to the audio files stored on the device through your SoundBar speakers What you need e A Bluetooth device which supports Bluetooth profile A2DP and with Bluetooth version as 2 1 EDR e The operational range between the SoundBar and a Bluetooth device is approximately 10 meters 30 feet 1 Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode L gt The Bluetooth indicator blinks at a fast rate 2 On the Bluetooth device switch on Bluetooth search for and select Philips HTL2160 to start connection see the user manual of the Bluetooth device on how to enable Bluetooth e When prompted for a password enter 0000 L gt During connection the indicator blinks at a lower rate 3 Wait until the Bluetooth connection is completed L gt When the Bluetooth connection succeeds and the Bluetooth indicator lights up L f the connection fails the Bluetooth indicator blinks continually at a lower rate 4 Select and play audio files or music on your Bluetooth device During play if a call is coming music play is paused Play resumes when the call en
10. When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storm or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Battery usage CAUTION To prevent battery leakage which may result in bodily injury property damage or damage to the unit e Install all batteries correctly and as marked on the unit Do not mix batteries old and new or carbon and alkaline etc e Remove batteries when the unit is not used for a long time e The batteries shall not be exposed to excessive heat such as sunshine fire or the like e Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate The product remote control may contain a coin button type battery which can be swallowed Keep the battery out of reach of children at all times If swallowed the battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion f you suspect that a battery has been swallowed or placed inside any part of the body seek immediate medical attention
11. del number Alternatively you can contact Philips Consumer Care in your country Before you contact Philips note down the model number and serial number of your product You can find this information on the back or bottom of your product Important safety instructions Read these instructions e Keep these instructions e Heed all warnings e Follow all instructions Do not use this apparatus near water e Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions e Do not install near any heat sources such as radiators heat registers stoves or 4 EN other apparatus including amplifiers that produce heat E Do not defeat the safety purpose of he polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer SA EA Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus
12. dio output on the TV or a digital device 4 SUBWOOFER Connect to the supplied subwoofer 5 AC MAINS Connect to the power supply 3 Connect This section helps you connect your SoundBar to a TV and other devices For information about the basic connections of your SoundBar and accessories see the quick start guide Note For identification and supply ratings refer to the type plate at the back or bottom of the product e Before you make or change any connections make sure that all devices are disconnected from the power outlet Placement Place the subwoofer at least 1 meter 3 feet away from your SoundBar and ten centimeters away from the wall For best results place your subwoofer as shown below Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers Use the best quality connection available on your TV Soundbar and other devices Option 1 Connect audio through a digital optical cable Best quality audio DIGITAL IN OPTICAL e The digital coaxial connector might be labeled DIGITAL AUDIO OUT Option 3 Connect audio through analog audio cables Basic quality audio 1 Using an analog cable connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device AUX IN AUDIO IN 1 Using an optica
13. ds 5 To exit Bluetooth select other source e When your switch back to Bluetooth mode Bluetooth connection remains active The music streaming may be interrupted by obstacles between the device and SoundBar such as wall metallic casing that covers the device or other devices nearby that operate in the same frequency e If you want to connect your SoundBar with another Bluetooth device disable the currently connected Bluetooth device Philips does not guarantee 100 compatibility with all Bluetooth devices Apply factory settings You can reset your SoundBar to the default settings programmed at the factory In mute mode quickly press AUX twice L gt The factory settings is restored EN 11 English 5 Wall mount H noe e Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage If you have any query contact Philips Consumer Care in your country e Before wall mounting make sure the wall can support the weight of your SoundBar Screw length diameter Depending on the type of wall mounting your SoundBar make sure that you use screws of a suitable length and diameter 3 3 5mm k gt 25mm For information about how to wall mount your SoundBar see the quick start guide 12 EN 6 Product specifications Note
14. ers may provide a separate warranty for their own products packaged with the bundled product The company is not liable for any damage to or loss of any programs data or other information stored on any media contained within the product or any non Philips product or part not covered by this warranty Recovery or reinstallation of programs data or other information is not covered under this Limited Warranty This warranty does not apply a to damage caused by accident abuse misuse neglect misapplication or non Philips product b to damage caused by service performed by anyone other than an Authorized Service Location c to a product or a part that has been modified without written permission or d if any serial number has been removed or defaced or e product accessories or consumables sold AS IS without warranty of any kind by including refurbished Philips product sold AS IS by some retailers This Limited Warranty does not cover Shipping charges to return defective product Labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna signal source systems outside of the product Product repair and or part replacement because of improper installation or maintenance connections to improper voltage supply power line surge lightning damage retained images or screen markings resulting from viewing fixed stationary con
15. ies may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations For perchlorate material special handling may apply Visit www dtsc ca gov hazardouswaste perchlorate 2 Your SoundBar Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your SoundBar at www philips com welcome Assemble your Soundbar Assemble your SoundBar as described in the quick start guide Step 1 Main unit This section includes an overview of the main unit PHILIPS Oo Switch the SoundBar on or to standby 2 VOLUME Increase or decrease volume 3 SOURCE Select an audio source for the SoundBar O Power Lights up when you switch on the SoundBar Source indicators e COAX OPT AUX Lights up when you switch to coaxial optical or analog audio input source USB Lights up when you switch to the USB source e AUDIO IN Lights up when you switch to the audio input source 6 SURR Lights up when you select Virtual Surround sound O Bluetooth Lights up when you switch to the Bluetooth mode Remote control This section includes an overview of the remote control Bluetooth AUX a COAX AUDIO IN PHILIPS SOUNDBAR SPEAKER 4 Standby On Switch the SoundBar on or to standby Bluetooth Switch to Blue
16. l cable connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device e The digital optical connector might be labeled SPDIF or SPDIF OUT Option 2 Connect audio through a digital coaxial cable Best quality audio DIGITAL IN COAXIAL IN 1 Using a coaxial cable connect the COAXIAL connector on your SoundBar to the COAXIAL DIGITAL OUT connector on the TV or other device EN 9 English 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices Before you start e Make the necessary connections described in the quick start guide or download the user manual from www philips com support Switch the SoundBar to the correct source for other devices Adjust the volume 1 Press to increase or decrease a volume level To mute sound press amp MUTE e To restore the sound press amp MUTE again or press L gt All Source indicators on the main unit blink twice when a volume is set to the maximum or minimum value Choose your sound This section helps you choose the ideal sound for your video or music Surround sound mode Experience an immersive audio experience with surround sound modes 1 Press SURR to select a surround mode e Virtual Surround Creates a highly surround listening experience The SURR indicator on the main unit lights up Stereo Two channel stereo
17. nce 8 ohm e Speaker drivers 130 mm 5 25 woofer e Frequency response 45 Hz 200 Hz Dimensions WxHxD 165 x 240 x 295 mm e Weight 2 6 kg e Cable length 3 m Remote control batteries e 1 xAAA RO3 1 5V 7 Troubleshooting A Warning Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair he product yourself f you have problems using this product check he following points before you request service f you still have a problem get support at www philips com support Main unit The buttons on the SoundBar do not work Disconnect the SoundBar from the power supply for a few minutes then reconnect Sound No sound from SoundBar speakers e Connect the audio cable from your SoundBar to your TV or other devices e Reset your SoundBar to its factory settings On the remote control select the correct audio input e Make sure that the SoundBar is not muted Distorted sound or echo e If you play audio from the TV through the SoundBar make sure that the TV is muted Bluetooth A device cannot connect with the SoundBar e The device does not support the compatible profiles required for the SoundBar e You have not enabled the Bluetooth function of the device See the user manual EN 13 English of the device on how to enable the function e The device is not correctly connected Connect the device c
18. orrectly see Play audio through Bluetooth on page 11 e The SoundBar is already connected with another Bluetooth device Disconnect the connected device then try again Quality of audio play from a connected Bluetooth device is poor e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar The connected Bluetooth device connects and disconnects constantly e The Bluetooth reception is poor Move the device closer to the SoundBar or remove any obstacle between the device and the SoundBar e Turn off Wi Fi function on the Bluetooth device to avoid interference e For some Bluetooth the Bluetooth connection can be deactivated automatically to save power This does not indicate any malfunction of the SoundBar 14 EN 8 Notice This section contains the legal notices Notice of compliance The device complies with the FCC rules Part 15 and with 21 CFR 1040 10 Operation is subject to the following two conditions O This device may not cause harmful interference and O This device must accept any interference received including interference that may cause undesired operation FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential in
19. quential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state province to state province P amp F USA Inc PO Box 2248 Alpharetta GA 30023 2248 16 PHILIPS Barra de Sonido HTL2160 F7 120V 60Hz 30 W Consumo de Energ a El ctrica 6 94 Wh Consumo de Energ a El ctrica del aparato en Modo de Espera 0 412 Wh Comercializado por P amp F MEXICANA S A DE C V IMPORTADOR P amp F MEXICANA S A DE C V Av La Palma 6 Col San Fernando La Herradura Huixquilucan Edo M xico MEXICO C P 52787 Tel 52 55 5269 9000 EXPORTADOR P amp F USA Inc E HECHO EN CHINA GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO Specifications are subject to change without notice 2013 Koninklijke Philips Electronics N V All rights reserved OY HTL2160_F7_UM_V4 0
20. sound Ideal for listening to music 10 EN Equalizer Change the high frequency treble and low frequency bass settings of the SoundBar 1 Press TREBLE or BASS to change the frequency e Press RESET to reset your treble bass level to the default settings programmed at the factory L gt All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player e A 3 5mm stereo audio cable 1 Using the 3 5mm stereo audio cable connect the MP3 player to the AUDIO IN connector on your SoundBar Press AUDIO IN Press the buttons on the MP3 player to select and play audio files or music UI N USB storage devices Enjoy audio on a USB storage device such as an MP3 player and USB flash memory etc What you need e A USB storage device that is formatted for FAT file systems and complies with the Mass Storage Class e An MP3 or WMA file on a USB storage device Connect a USB storage device to the SoundBar 2 Press USB on the remote control L gt The play starts after a few seconds e This product may not be compatible with certain types of USB storage device e If you use a USB extension cable USB HUB or USB multi reader the USB storage device may not be recognized e Digital camera PTP protocols are not supported Do not remove the U
21. stallation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful nterference to radio communications However there is no guarantee that in n n w erference will not occur in a particular installation If this equipment does cause harmful erference to radio or television reception hich can be determined by turning the equipment off and on the user is encouraged o try to correct the interference by one or more of the following measures e Relocate the receiving antenna e Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body This transmitter must not be co located or operated in conjunction with any other antenna or transmitter Warning Changes or modifications made to this equipment not expressly approved by Philips may void the FCC authorization to operate this equipment Model number PHILIPS HTL2160 F7 Trade Name Philips Responsible Party P amp F USA Inc PO Box 2248
22. tooth mode AUX AUDIO IN Switch your audio source to the AUX or audio input connection Increase or decrease volume USB Switch your audio source to the USB connection Skip to the next song in the shuffle play mode SURR Toggle between stereo and virtual surround sound OO T BASS RESET e Increase or decrease bass e Reset your bass level to the default settings programmed at the factory TREBLE RESET e Increase or decrease treble e Reset your treble level to the default settings programmed at the factory 9 OPT Switch your audio source to the optical connection 1 amp Mute or restore volume 1 COAX Switch your audio source to the coaxial connection Connectors This section includes an overview of the connectors available on your SoundBar EN 7 English Top connectors BO 4 lt USB Audio input from a USB storage device AUDIO IN Audio input from an MP3 player 3 5mm jack Rear connectors re O En e BLACK RED SUBWOOFER 89 AC MAINS L OPTICAL o Q AUDIO IN Connect to an analog audio output on the TV or an analog device O DIGITAL IN COAXIAL Connect to a coaxial audio output on the TV or a digital device O DIGITAL IN OPTICAL Connect to an optical au
Download Pdf Manuals
Related Search