Home

Vivitar T135

1. Photo Playback Mode The Playback Mode allows you to review and edit photos and videos that you ve already taken with you camera e When you first turn on the camera the camera will be in Photo Capture mode by default e Press the MODE button twice to open the Playback Mode e The latest captured image appears on the LCD screen If there are no images stored a message No File appears Viewing Photos on Your Camera 1 Select your Photo e Once in Playback Mode press the LEFT or RIGHT direction buttons to scroll through the images on your camera s memory card until you find the image you would like to view e Each captured image video and photo is displayed on the LCD screen e Photos appear with a JPG icon on the top left of the LCD screen e Viewing your 3D Photos Wear the 3D glasses included to view the photos you have captured in 3D 2 Looming In Out of your selected Photo e Press the T Zoom In button to Zoom In and magnify the selected photo Use the UP DOWN LEFT RIGHT direction buttons to navigate around the photo e Press the W Zoom Out button to Zoom Out of the selected photo Use the UP DOWN LEFT RIGHT direction buttons to navigate around the photo Thumbnail View Easily navigate and select the image you wish to view by using the Thumbnail View The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons to scroll and select images from the thumbnails 1
2. m x D Computer System Requirements WINDOWS OS To be able to download photos and videos to your PC using the Vivitar Experience Image Manager Software you will need the following minimum configuration Microsoft Windows XP with Service Pack 3 Windows Vista with Service Pack 1 or Windows 7 Pentium 4 processor or above 512 MB of RAM with 250 MB of free hard disk space 16 bit Color monitor 1024 X 768 recommended screen resolution CD ROM Drive QuickTime 6 or higher Microsoft Internet Explorer 7 or higher Windows Media Player 10 or higher DirectX 9 or higher Internet connection required MACINTOSH OS To be able to download photos and videos to your Macintosh using the Vivitar Experience Image Manager Software you will need the following minimum configuration Intel processor running Mac OS X v10 5 x or later 256 MB RAM 250 MB free hard disk space Display 1024 x 768 or higher resolution monitor CD ROM Drive QuickTime 6 or higher Internet connection required Powering the Camera On Off e Make sure the b have been inserted properly into your digital camera If your camera comes with a rechargeable lithium battery make sure it is fully charged before the first use e Make sure an SD card has been inserted into your camera SD card up to 32GB SD Card not included Please see Initial Camera Setup for more information Powering the camera ON I Press the Q Power button to turn your c
3. Meters the area within the spot point frame at the center of the LCD to set the exposure on the subject in the center of the monitor Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Metering menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Qoo option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode Anicon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Language Menu 3D and 2D Photo Capture You can select your camera s language setting by selecting the desired language from the Language menu 1 Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Language menu 47 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select and save the desired option A Quee option icon will appear on the selected item 9 6 Press the LEFT or RIGHT button to select the next menu item 7 Press the MOD
4. When you are ready to crop press the Shutter button To confirm and crop the image select Crop and press SET To cancel without cropping select Cancel and press SET or simply press the MODE button to exit If you selected to crop your image when you see the cropped picture appear press the Shutter button again to save or press the SET button to cancel and return to the previous menu If you selected to save the cropped picture will now be saved as a new picture to your memory card 36 Protect Lock Menu 3D and 2D Photos Pictures and Videos taken with your camera can be protected or locked to prevent any deletion or alteration being made to the files 1 Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Protect Lock menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select the desired option 5 Press the LEFT or RIGHT button to select the next menu item 6 Press the MODE button to exit the menu and return to your previous mode 7 Any image that is locked will display a lock symbol on the LCD screen when viewing that image in the playback mode Photos that are not locked will not display the lock symbol 8 Remember that you cannot delete or edit photos while they are locked Print This Photo Menu 3D and 2D Photos You can use the Print Phot
5. select Cancel and press the SET button To proceed with the format select Yes and press the SET button You will be asked to confirm the formatting of the memory card e Select No to exit without formatting e Select Yes and press the SET button to begin the format The memory card will be completely formatted Firmware Factory Default Settings Menu si SD and 2D Photo Capture Use this menu to view the Firmware version on your camera or to reset your camera settings to the Factory Default Settings Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu The Default Setting is selected Press the SET button to reset the camera to the factory default settings You will be asked to confirm the resetting to the factory default settings e Select No to exit the menu and return to the previous mode without resetting to the default settings e Select Yes and press the SET button to proceed with the reset 30 You will then automatically exit the menu and return to the previous mode with the digital camera settings set to the Factory Default Settings Note After RESETTING to the default settings it is recommended to select your system Language Date Time and ViviLink for Photos and Videos If you do not the next time your camera is powered on you will be prompted to define those settings 31
6. 4PE 62 Sakar Australia Return faulty camera to the Refund Counter at the store where purchased Technical Support For technical support issues please visit our website at www vivitar com You can find manuals software and FAQ s at the website Can t find what you are looking for E mail us at support vivitar com and one of our technical support team members will answer your questions For phone support in the US please call 1 800 592 9541 in the UK call 0800 917 4831 in Australia call 1800 006 614 If you would like to call from anywhere else please visit www vivitar com for your local toll free number Troubleshooting Q have taken photos and selected the Get Images button I get a message that the images were successfully transferred but the photos do not appear on my computer What do I do First ensure that you have in fact taken photos Press the Shutter button to take some sample photos and then try downloading them again With test photos if the camera powers off before you upload them to the computer the photos are not stored in the camera s memory These photos should be uploaded quickly before the camera powers off If the photos are saved to the SD memory card then all the photos should appear Q How do I make sure I don t lose important pictures This camera requires an SD card for normal use If the camera powers off nothing will happen to the images stored on the SD memory card We recommend always do
7. Press the SET button to select and save the desired option A Q esce option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings 20 Anti Shake Menu W 3D and 2D Photo Capture The Anti Shake feature reduces image distortion that can be caused by movement of the camera while capturing the image Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Anti Shake menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select and save the desired option 5 A Q ctectec option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode Anicon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings a ei Face Detect Menu 2D Photo Capture only The Face Detect feature when set to On allow
8. Press the W Zoom Out button All the images on your camera will appear in the Thumbnail View 2 Use the UP DOWN LEFT RIGHT direction buttons to scroll and select the image you wish to view 3 Press the SET button to enlarge the selected image full size 32 Photo Playback Mode Quick Function Buttons Your digital camera has a four directional pad that functions as Quick Function buttons Displays the PREVIOUS image Views all the Photos as a Slide Show with 3 5 or 10 second intervals To exit the Slide Show press any button Other Opens Thumbnail View To Navigate in the Thumbnail View press the UP DOWN LEFT RIGHT direction buttons To select a JPG in the Thumbnail View press the SET button W Zoom out Opens the menu options for Photo Playback Mode Saves your selected menu option Note To navigate through the Menus use the UP DOWN LEFT RIGHT direction control buttons 33 Photo Playback Mode Menus The following are the menus that appear in your camera s Photo Playback Mode Delete ViviLink for Photos Rotate Crop Image Protect Lock Crop sid i LockThisPhoto This Photo Delete This Photo P E Facebook ep w Ceca P Br 29 J occa images IE Photobucket cancer 1 Unlock A images mre o wn Print Photos Slide Show 10 Seconds Delete Menu 3D and 2D Photos While in the Playback Mode you can delete pict
9. RIGHT direction control buttons to scroll and select the Date Time menu 3 Press the UP or DOWN direction control buttons to highlight the Date Setup menu option 2 E go EM N then press the SET button to select the option The Date Setup submenu will open Scroll through the window with the RIGHT and LEFT navigation buttons For each field in the menu use the UP and DOWN navigation buttons to set the date and time When you have finished setting the date and time press the SET button to save your settings and return to the previous mode Press the MODE button to exit the menu without saving your settings and return to your previous screen Silent Mode Menu 3D and 2D Photo Capture You have the option of activating the camera s Silent mode to disable all of the sound effects except for beeps heard during the Self Timer countdown that the camera emits when performing camera functions 1 2 A CO Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Silent Mode menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A O ecte option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode Remember that this settin
10. SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Color Effect menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Q ctectec option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Multi SnapShots Menu 3D and 2D Photo Capture When enabled the Multi SnapShots feature allows you to take six rapid snapshots in a row with a single click of the shutter button This feature can be effective when trying to capture a particular moment in a sporting event or other scenes with quick movements 1 2 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Multi SnapShots menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Quee option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon r
11. button to select the next menu item Press the MODE button to exit the menu and return to your previous mode 35 Rotate Menu 2D Photos only Use this menu to rotate the pictures that you ve taken with your camera 1 Oo Oo A C N Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Rotate menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option The selected picture will now appear rotated in the Playback mode Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode Crop Image Menu 3D and 2D Photos You can crop any picture on your camera with the Crop feature 1 Oo Oo A C N 7 10 11 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu Press the UP or DOWN to highlight the Crop option Press the SET button to open the Crop option The Crop box will open on the selected picture Use the directional buttons to move the Crop box to define the desired crop area Use the W T Zoom buttons on the camera to enlarge or shrink the Crop box Use the LEFT RIGHT UP and DOWN direction control buttons to move the Crop box
12. camera will be less sensitive to light and will optimize the image quality in environments with bright lighting Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the ISO menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Quee option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings 46 Metering Menu 3D and 2D Photo Capture The Metering setting will affect how your camera focuses when capturing an image Depending on your selection the camera will be more sensitive to focusing on particular areas in the display and adjust the image color and lighting accordingly Center Averages the light metered from the entire frame but giving greater weight to the subject in the center Multi Used in standard conditions the camera divides and adjusts the settings of the image into several zones for light metering such as complex light conditions position of subject brightness background direct light and scenes Spot
13. taken by your camera 50Hz UK Europe and Australia 60Hz US Canada and South America Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Qoo option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings 29 Format Memory Card Menu 3D and 2D Photo Capture You can use the Format Memory Card menu to delete all of the content that is currently on your camera s memory card Keep in mind that formatting the memory card will permanently delete all of the content on your camera s memory card This option will delete all of the content at one time If you would like to delete individual images use the delete menu in the camera s Playback mode Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Format Memory Card menu Press the UP or DOWN direction control buttons to highlight the menu options To exit without formatting the card
14. the Photo Capture Mode LCD screen in sequence To change the Flash mode press the LEFT Quick Function button until you arrive at your desired settings NOTE Flash is available only in 2D Photo Capture Mode There is no Flash in 3D Photo Capture mode Important When using Flash stand between 8 to 10 feet away from the scene you would like to capture No flash will appear Use this when you do not want to activate Flash NOTE A Turn On Flash message appears when the camera detects a need for flash When this message appears it is recommended to press the Flash Up button and select one of the flash options Auto Flash Forced On or Red Eye Reduction 2 When you want the camera to determine if Flash is needed select Auto Flash The flash will automatically turn on according to the lighting conditions When the LED light stops blinking the Flash is ready for use Note In some cameras an initial flash appears to test your lighting conditions If flash is needed a second flash will appear upon taking the photo 4 The flash is enabled for each photo Note If you use this option in a well lit environment your photo may be appear too bright light overexposed S Eliminates the red eye effect in a photo caused by flash Forced Off Default Auto Flash Forced On Red Eye Reduction Hide Show the LCD Icons The display of the icons on the LCD screen can be hidden or visible as desired 1 Hold the MODE button
15. to scroll and select the 3D Calibration menu Press the UP or DOWN direction control buttons to scroll through the menu options select Auto to use the default 3D settings to capture your photos select 3D Manual Shift and then use the LEFT RIGHT buttons to control the 3D coordinates and 3D effect Press the SET button to select and save the desired option Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Scene Menu 2D Photo Capture only The Scene Menu allows you to choose scene settings that let your camera to adapt properly to your current environment Note When selecting the HIGH SENSITIVITY Option by default the camera switches off the FLASH automatically if its ON to optimize the picture quality If however you would like to override it and manually turn ON the flash you can do so Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Quee option icon will appear on the selected item Press the LEFT or RIGHT button to select the next
16. will display on the top left corner of the LCD display When in Playback Mode this icon will display on the top left corner of the LCD display Navigating the Menus Each camera mode has a set of menus specific to that mode Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll between the various menus for the current mode Press the UP or DOWN direction control buttons to highlight the desired menu selection Press the SET button to confirm and save the highlighted menu option If the selection can be remembered by the camera a Dectection icon will appear to the right of the selected menu option Changes made to these options will remain as is until you decide to change them again at a later time Some menu options are single use functions that are not remembered by the camera and do not display this icon when selected At any time you can press the MODE button to exit the menus and return to the previous screen Photo Capture Mode When the digital camera is first powered ON the camera will be in Photo Capture Mode by default The Photo Capture mode allows you to capture pictures with your digital camera Taking a Picture 1 While in Photo Capture mode use the LCD display to direct the camera at the scene you would like to capture 2 Press the T Zoom In and W Zoom Out buttons to zoom in out if desired Note The actual shape of the zoom buttons
17. 9 Cae Sia Cae cate oda done ET EIT EI edta IO s d sod od ese de PES 60 Transferring Images from my Camera to my Computer Manually essssesse 60 osea ENE B ausa du nesciun ios diuo m iei D EP dL E TEES 61 Sakar Waranty OE Goode oec oth S ith Eta Datus Berta aote ntu e Decr ambae ach ird acted s baie a dul ad 62 Technical SUD DO as eters cti motui a Sotu eun Sd Eaendl enun ulcus E 63 FYOUBIESMOOTING E ca vapid sa wed sed saddest eed dese 63 Introduction Thank you for purchasing this camera Everything you need to take quality digital photos and videos is included with your camera Vivitar makes capturing those special moments as easy as possible Please read this manual carefully first in order to get the most out of your digital camera Note Your camera needs an SD Memory card up to 32GB for normal use SD Memory cards are not included and need to be purchased separately What s Included 1 Digital Camera 2 USB cable Vivitar Experience Image Manager ed software Installation CD AV Adapter Wrist Strap 3D Glasses QA E doe sp Built in Lithium lon Battery not shown Note SD Memory Card and batteries not included Parts of the Camera Power Button Shutter Button LCD Screen LED Charge Indicator Zoom Out Zoom In RESET MODE Button SET Button Flash Left Button 3D Up Button Vivitar 12 13 14 19 16 17 18 19 20 21 22 Delete D
18. Do not disconnect the cable during transfer Doing so will cancel the transfer of any files on their way to your computer Camera Maintenance The digital camera is a delicate device Please handle your camera with care to avoid damaging it Do not expose your camera to heat sources Do not use you camera in wet or moist conditions 61 Sakar Warranty Card This warranty covers for the original consumer purchaser only and is not transferable Products that fail to function properly UNDER NORMAL USAGE due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the time of purchase What Is Not Covered By Warranty Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use including but limited to repair by unauthorized parties tampering modification or accident What To Do When Service Is Required When returning your defective product postage pre paid for service your package should include 1 Copy of original bill of sale 2 Adetailed written description of the problem 3 Your return address and telephone number Daytime MAIL TO ADDRESS BELOW Sakar US oakar International Attention Service Department 195 Carter Drive Edison NJ 08817 Sakar UK Europe Attention Service Department 2D Siskin Parkway East 4020 Middlemarch Business Park Coventry CV3
19. E button to exit the menu and return to your previous mode 8 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Date Time Menu 3D and 2D Photo Capture When you capture an image with your camera the image will include a time stamp with the date and time that the image was taken The Date Time menu allows you to set your camera s date and time as desired You can also disable the timestamp for future images that will be taken with your camera On The timestamp will appear on photos taken Off The date stamp will not appear on photos taken To Enable Disable the Timestamp 1 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Date Time menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Qoo option icon will appear on the selected item 9 6 Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode 8 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings To Set the Date and Time 1 Press the SET button to open the menus for the current mode 48 ZSO x od N Pre
20. E button to exit the menu and return to your previous mode 8 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Date Time Menu amp amp 3D and 2D Photo Capture When you capture an image with your camera the image will include a time stamp with the date and time that the image was taken The Date Time menu allows you to set your camera s date and time as desired You can also disable the timestamp for future images that will be taken with your camera On The timestamp will appear on photos taken Off The date stamp will not appear on photos taken To Enable Disable the Timestamp 1 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Date Time menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Quee option icon will appear on the selected item 9 6 Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode 8 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings To Set the Date and Time 1 Press the SET button to open the menus for the current mode 2 Press the LEFT or
21. ViviCam T135 3D Digital Camera User Manual Vivitar we make it easy 2009 2011 Sakar International Inc All rights reserved Windows and the Windows logo are registered trademarks of Microsoft Corporation All other trademarks are the property of their respective companies Table of Contents WALT OGG UO WA sts stereos tnt teens Rae abies eat Mabe E E 2 Wat S MCUdE O EET 2 Panc ore Cane aE E TOO OQ 3 Ma e citi sifcibe cibo e 4 Man Galera MOG CS uteretur oret epu s ubo deputat custet esc petes e bras text cte dedu aeditidutesitdai cum ediderunt tesis 8 Camera Technical Specifications esses EEEE a e cana aca Fea dua kan ad ges 9 Compiler ystem hedullemelblls s spuisinbc eni qiu ip su oi mbn cde a deoa da tu dub ute S petet o adest e aede EE 10 POWERING me Camera OMO PEE 11 Changing Camera ModE ss gence e mc ut tpe teet A E E ETERON 12 Navigating Me MCAUS e 13 miaiojede ierao d a 14 PMOL IPA VOC MOTO ENERO TUO T DTE rm 32 Video Capture MOG 6 uires den S R desnudo dede vae E vaccae ved oue eevee 39 VIGEONPIAVD ACK MOOG NER TELE TS 52 HIS tall PIGS te oOITWBEG esesesatesucenotusques ue etm esae TEETE 57 Connecting the Camera to the COMPUTET ccccceccecseeeeceeeeceeseeceeeeeseeseeseecessesesseeesseeeesaaeees 58 Getting Photos and Videos from your Camera to Your Computer sseeeeeseesssss 5
22. al network and press the SET button to confirm the selection 3 After the ViviLink Video option is confirmed the camera is now ready to use Main Camera Modes Your camera has different modes for the various camera functions You can switch modes by pressing the MODE button on your camera after the camera has been powered ON o Photo Capture Mode Use this mode to capture pictures with your camera This is the default mode when the camera is powered ON To take a picture aim your camera as desired and press the Shutter button The picture will be automatically saved to your camera s memory card To access the various menus for the Photo Capture mode press the SET button while in the Photo Capture mode Video Capture Mode Use this mode to capture videos with your digital camera After turning on your camera press the MODE button once to open the Video Capture mode To take a video aim your camera as desired and press the Shutter button to start the record A red record indicator will appear on the LCD screen while record is in progress To stop the record press the Shutter button again The video will be automatically saved to your camera s memory card To access the various menus for the Video Capture mode press the SET button while in the Video Capture mode gt Playback Mode Photos amp Videos Use this mode to view and manage the photos and videos on your camera After turning on your camera press the MODE b
23. allation screen should automatically open Vivitar IMAGE MANAGER 2 On PC The Vivitar Experience Image Manager Installer window appears If the window does not appear open the application s CD DVD drive and click on Setup exe to launch the installer 3 On Macintosh Click the icon that appears on the desktop to install the Vivitar Experience Image Manager 4 Ifyou do not have internet access at the time of inserting the CD ROM connect to the internet and then click the Install Vivitar Experience Image Manager button to begin the installation Note If you do not have internet access you can still download media from the camera Click the How to transfer photos and videos from my camera to my computer button for instructions 57 5 10 11 12 13 14 If you have internet access the Choose your language window opens choose your language and click Next to open the next window Select your camera model from the list and click Next to open the next window Click Next to confirm your camera model selection and to install the application Please wait while the application is being installed on your computer Please review the license terms On PC and Macintosh Click the I accept the terms of this license agreement and then click Next to continue On PC only Let the Vivitar Experience Image Manager installer create the folder to where the program will be insta
24. amera ON e After powering on the camera emits a sound and the LED light turns on briefly e The LCD screen turns on with your camera in Photo Capture mode to start Powering the camera OFF I While the camera is on you can press the Q Power button again at any time to turn your camera OFF e A Goodbye screen appears and then the camera will power off completely Note Your digital camera also has an Auto Power Off feature that will automatically turn off your camera after a specific period of time that your camera is left idle The Auto Power Off settings can be set from the Auto Power Off settings menu in either Photo Capture Mode or Video Capture Mode Changing Camera Mode Your camera has three main modes 1 Photo Capture Mode Use this mode to capture photos with your camera 2 Video Capture Mode Use this mode to capture videos with your camera 3 Playback Mode for photos and videos Use this mode to view the photos and videos you have already taken with your camera e When the camera is first powered ON the Photo Capture Mode will be active e heicons that appear on the LCD screen are the best default settings so that you can begin to capture and enjoy clear quality photos To change the active camera mode make sure the camera is powered ON and press the MODE button o When in Photo Capture Mode this icon will display on the top left corner of the LCD display a When in Video Capture Mode this icon
25. ares Auto Power Off Disable U LETS 2R CT ESTE Nomal ISO Soau Of soso Frequency 50 Hz er v 41 White Balance AWB Auto e Fluorescent a Metering E cener 3 Multi e Spt L Format Memory Card Cancel v Color Effect Standard Ofi ava ____ Vale TESTS S English Francais Portugu s Nederlands Pycckun Turkce Firmware v 1 0 12 Default Setting Reset All Settings es Cancel 3D Calibration 3D Photo Capture only The 3D Calibration Menu allows you to control the 3D coordinates for your image Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the 3D Calibration menu Press the UP or DOWN direction control buttons to scroll through the menu options select Auto to use the default 3D settings to capture your photos select 3D Manual Shift and then use the LEFT RIGHT buttons to control the 3D coordinates and 3D effect Press the SET button to select and save the desired option Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Scene Menu 2D Photo Capture only The Scene Menu allows you to choose scene settings that let your
26. by using the negative count to reduce the amount of light allowed into the lens by your camera If the environment has less light darker than is needed increase the exposure setting by using the positive count to increase the amount of light allowed into the lens by your camera 45 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Light Exposure menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Ocotea option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings ISO Menu 9 3D and 2D Photo Capture The ISO menu allows you to set the level of sensitivity that your camera has to light in the surrounding environment When the ISO level is increased the image sensor in your camera will be more sensitive to light and allow you to capture images in lower light situations The higher sensitivity to light however may reduce the quality of the images that are taken When the ISO is reduced the image sensor in your
27. camera to adapt properly to your current environment Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Scene menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Oecd option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings 42 Image Size Menu 4 3D and 2D Photo Capture The Image Size menu allows you to choose the desired size of the images taken by your camera Keep in mind that images with a larger size will also take up more of your camera s memory 1 Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Image Size menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select and save the desired option A Occita option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu an
28. can select to download photos videos or both 4 Select your camera removable disk from the device window If your camera is the only USB device connected then it will be selected automatically 5 Selecta location on the computer where to place the new photo and video files 6 Add the new photo and video files to albums if desired 7 Select to remove the media files from the selected device removable disk after the import 8 Click the Get Images button to transfer the photos and videos from your camera to your computer 9 A media download progress bar appears on the bottom left showing the number of media files downloading to your computer A message appears when the download is complete 10 The photo and video files that you selected are now downloaded to your computer to the selected folder and albums ready for your use 59 Get Started Using the Vivitar Experience Image Manager you can Upload and manage photos and videos to and from the most popular photo sharing and social networking sites Facebook Flickr Picasa MySpace Photobucket Twitpic Twitgoo and You Tube seamlessly transfer photos and videos from one social network to another Organize your images by creating offline and online aloums Edit images using automatic and manual tools Use automatic Geotagging with built in Google Maps For more details on how to use the Vivitar Experience Image Manager open the Help file or click the Take a To
29. d return to your previous mode Anicon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Image Quality Menu 3D and 2D Photo Capture The Image Quality menu allows you to select the desired quality level of the images taken by your camera Keep in mind that images with a higher image quality level will also take up more memory on your camera 1 Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Image Quality menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select and save the desired option A Quee option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode Anicon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the 43 setting or restore the camera s default factory settings White Balance Menu 4 2D Photo Capture only The White Balance feature allows your camera to adjust the coloring of the captured images depending on the type of light source in the current environment Properly ad
30. desired option A Quee option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode While in Playback mode press the UP Quick Function button to initiate the slide show Press any button to exit the slide show and return to the previous mode 38 Video Capture Mode The Video Capture Mode allows you to capture videos with your digital camera When the camera is first powered ON the camera will be in Photo Capture Mode Press the MODE button once to access the Video Capture Mode Taking a Video 1 While in Video Capture Mode use the LCD display to direct the camera at the scene you would like to capture 2 Click the T Zoom In and W Zoom Out buttons to better set the camera display if desired Note he actual shape of these buttons may vary per camera model 3 Press the Shutter et button on the top of the camera to START the video capture 4 You will see a red icon at the top of the LCD indicating that the record is in progress 5 To STOP the video record press the Shutter ae button again 6 The video will automatically be saved to the camera s SD memory card 3D Video Capture To capture your videos in 3 dimension press the 3D UP buiton The 3D Icon will appear on the top left side of the LCD screen This indicates that the 3D Video Capture Mode is ready Put on your 3D glasses i
31. e count to reduce the amount of light allowed into the lens by your camera If the environment has less light darker than is needed increase the exposure setting by using the positive count to increase the amount of light allowed into the lens by your camera 1 2 3 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Light Exposure menu Press the UP or DOWN direction control buttons to scroll through the menu options 24 Press the SET button to select and save the desired option A Q ctectec option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings ISO Menu 3D and 2D Photo Capture The ISO menu allows you to set the level of sensitivity that your camera has to light in the surrounding environment When the ISO level is increased the image sensor in your camera will be more sensitive to light and allow you to capture images in lower light situations The higher sensitivity to light however may reduce the quality of the images that are taken When the ISO is reduced the image sensor in your ca
32. e factory default settings e Select No to exit the menu and return to the previous mode without resetting to the default settings e Select Yes and press the SET button to proceed with the reset You will then automatically exit the menu and return to the previous mode with the digital camera settings set to the Factory Default Settings Note After RESETTING to the default settings it is recommended to select your system Language Date Time and ViviLink for Photos and Videos If you do not the next time your camera is powered on you will be prompted to define those settings 51 Video Playback Mode The Playback Mode allows you to review and edit photos and videos that you ve already taken with you camera e When you first turn on the camera the camera will be in Photo Capture mode by default e Press the MODE button twice to open the Playback Mode e The latest captured image appears on the LCD screen If there are no images stored a message No File appears Playing Videos on Your Camera 1 Select your Video e Once in Playback mode press the LEFT or RIGHT direction buttons to scroll through the images on your camera s memory card until you find the video you would like to view e Each captured image video and photo is displayed on the LCD screen e Videos appear with an AVP icon on the top left of the LCD screen 2 Play your selected video e Press the Shutter button to START playing the video e Pr
33. eflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the 23 setting or restore the camera s default factory settings Image Sharpness Menu 4 2D Photo Capture You can set the level of sharpness in the images taken with your camera The sharpness level dictates if the edges of objects in the image are more or less distinct Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Image Sharpness menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Qe option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Light Exposure Menu 4 3D and 2D Photo Capture The Light Exposure setting helps you control the amount of light that enters your camera s lens This setting should be adjusted when the environment is lighter or darker than normal When the environment has more light than is needed reduce the exposure setting by using the negativ
34. ess the Shutter button again to PAUSE the video and to continue playing and pausing as needed e To fully STOP the video and restore the icons to the LCD press the UP button e While the Video is playing all the icons on the top section of the LCD disappear NOTE Use the 3D glasses to view videos that have been captured in 3D Mode Thumbnail View Easily navigate and select the image you wish to view by using the Thumbnail View The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons to scroll and select images from the thumbnails 1 Press the W Zoom Out button All the images on your camera will appear in the Thumbnail View 2 Use the UP DOWN LEFT RIGHT direction buttons to scroll and select the image you 52 wish to view 3 Press the SET button to enlarge the image full size 4 Once the selected video is full size you can play and view the video Video Playback Mode Quick Function Buttons Your digital camera has a four directional pad that functions as Quick Function buttons Quick Function Button Function O O O O OOOO O O Displays the PREVIOUS image Right Displays the NEXT image Other shutter 0 PLAYS and PAUSES a playing video Opens Thumbnail View To Navigate in the Thumbnail View press the UP DOWN LEFT RIGHT direction buttons W Zoom out To select a JPG AVI in the Thumbnail View press the SET button Opens the menu options for Photo Playback M
35. for 2 seconds to hide the display of the icons on the screen 2 Press the MODE button again to redisplay the icons on the screen Photo Capture Mode Menus The following are the menus that appear in your camera s 2D and or 3D Photo Capture Mode 3D Calibration Auto CB 3D Manual Shift l Q A Bean Scene Ta c Auto E 2 Face Detect v y Light Exposure 3 Lightest 1 2 Lighter 1 El E i 3 Darkest L Silent Mode Image Resolution 14M 4416 x 3312 1 9M 3456 x 2592 ZM 3648 x 2048 5M 2592 x 1944 3M 2048 x 1536 e 4M 1920 x 1080 VGA 640 x 480 U White Balance AWB Auto vie 29 Daylight G Cloudy Fluorescent ISO PisoAwo Of soso Auto Power Off Dise _ Image Quality Me norma F Fine g Super Fine R Color Effect wa Metering E center f 3 Multi Spt O L Frequency 17 Language English e Nederlands Format Memory Card Cancel Image Sharpness gt lt Normal k4 Sharp 1 Date Time Off Date Setup L Date Setup a 12 00 00 AM vr v 01 01 2010 Firmware v 1 0 12 Default Setting i Reset All Settings 3D Calibration 3D Photo Capture only The 3D Calibration Menu allows you to control the 3D coordinates for your image Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons
36. g will be saved by your camera until you manually change the setting or restore the camera s default factory settings Auto Power Off Menu 3D and 2D Photo Capture You can use the Auto Power Off feature in order to conserve you camera s battery life The designated time represents when your camera will automatically power off When the camera sits idle for the designated period of time the camera will shut off completely and will need to be powered on again with the power button before the next use 28 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Auto Power Off menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Ocotea option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Frequency Menu 3D and 2D Photo Capture The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale If your camera is set to a frequency that does not match your country s electric current you may see waves on the images
37. he SD card slot SD Memorennd up to 32GB needed for normal use Push the SD card until you hear a slight clicking sound This indicates the SD card has been inserted correctly Note e After the camera is powered on an SD icon will appear on the LCD display If you do not see the SD icon on the display please check if the card was inserted properly e Make sure the SD card is not locked check the lock switch on the side of the SD card If the SD card is locked this will prevent the camera from saving captured photos to the SD card Turning On the Camera Using the Camera on a Selecting Vivitar E the modes P Accessing the menu When powering the camera on for the FIRST time the camera will take you through the INITIAL CAMERA SETUP Powering the Camera ON 1 Battery Make sure the battery is fully charged 2 SD Card Make sure the SD Memory Card has been inserted properly 3 Power On Press the O POWER button to turn on the camera Setting the Camera Language 1 You will first be prompted to select a language for the camera The Language selection menu will appear Select the language of your choice by pressing the UP and DOWN direction control buttons Then press the SET button to confirm the selection 2 After selecting a language you will be asked if you would like to continue with the initial camera setup A message will appear Continue with Camera Setup Select Yes to c
38. ious mode An icon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings White Balance Menu 4 2D Photo Capture only The White Balance feature allows your camera to adjust the coloring of the captured images depending on the type of light source in the current environment Properly adjusting the White Balance setting to match your current environment will allow the camera to properly balance the colors in the images that are taken with your camera 1 2 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the White Balance menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Occa option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings 22 Color Effect Menu 2D Photo Capture only You can choose to add a color effect to the images taken with your camera Press the
39. it the menu and return to your previous mode 8 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Image Sharpness Menu 2D Photo Capture only You can set the level of sharpness in the images taken with your camera The sharpness level dictates if the edges of objects in the image are more or less distinct 1 Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Image Sharpness menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select and save the desired option A Qe option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode Anicon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Light Exposure Menu 4 3D and 2D Photo Capture The Light Exposure setting helps you control the amount of light that enters your camera s lens This setting should be adjusted when the environment is lighter or darker than normal When the environment has more light than is needed reduce the exposure setting
40. justing the White Balance setting to match your current environment will allow the camera to properly balance the colors in the images that are taken with your camera 1 2 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the White Balance menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Q esce option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Color Effect Menu amp 2D Photo Capture only You can choose to add a color effect to the images taken with your camera Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Color Effect menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Quee option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item 44 7 Press the MODE button to ex
41. lled and then click Install Please wait while the application continues the installation process on your computer On PC Click the Close button when the installation is complete Click the Launch Vivitar Experience Image Manager to open the application On Macintosh Click the Quit button when the installation is complete Click the Launch Vivitar Experience Image Manager to open the application If you close the application you can run the Vivitar Experience Image Manager from the Programs PC or Applications Mac menu on your computer Connecting the Camera to the Computer Use the USB cable that came with your camera to connect your camera to your computer Power the camera ON The first time you connect the device to the computer you will have to wait a few seconds until the computer recognizes the device 58 Getting Photos and Videos from your Camera to Your Computer An SD card needs to be inserted Do not disconnect the cable during transfer Doing so will cancel the transfer of any files on their way to your computer 1 Select the Get Images button from the Main menu Vivitar perjence Ag amp IMAGE MANAGER ee meer dr d Send by Email Slideshow Print Photos Frame Maker Gift Generator q DEG SSS SS TT eT M OT sim f 2 E CY otp g YouTube Facebook Flickr MySpace Photobucket Twitpic Twitgoo YouTube Web All 1S 2 The Get Images from device window opens 3 You
42. may vary per camera model You can magnify your subject up to 4 times using the digital zoom The following Digital Zoom Indicator appears on the right side of the LCD screen Digital Zoom 3 Click the Shutter e button to take the picture 4 The picture will automatically be saved to the camera s SD memory card 3D Photo Capture To capture your photos in 3 dimension press the 3D UP button The 3D Icon will appear on the top left side of the LCD screen This indicates that the 3D Photo Capture Mode is ready Put on your 3D glasses included in order to view the scene on the LCD screen in 3D as you take your photo Photo Capture Mode Quick Function Buttons Your digital camera has a four directional pad that functions as Quick Function buttons Flash Toggles the Flash options appearing on the LCD NOTE No flash in 3D Photo Capture mode 3D Option Toggles between 3D and 2D image capture Delete Opens the Delete This Photo option and allows you to view and delete the last photo taken Right ViviLink Opens the ViviLink for Photos menu Opens the menu options for Photo Capture Mode Saves your selected menu option Note To navigate through the Menus use the UP DOWN LEFT RIGHT direction control buttons Toggles between the Photo Capture Mode Video Capture Mode and Playback Mode e Exits the menu screen Flash Options There are several Flash options available on your camera The options appear on
43. menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Image Resolution Menu 3D and 2D Photo Capture The Image Resolution menu allows you to choose the desired size of the images taken by your camera Keep in mind that images with a higher resolution will also take up more of your camera s memory Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Image Resolution menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Ocotea option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Image Quality Menu 3D and 2D Photo Capture The Image Quality menu allows you to select the desired quality level of the images taken by your camera Keep in mind that images with a higher image
44. mera will be less sensitive to light and will optimize the image quality in environments with bright lighting Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the ISO menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Qeciected option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings 25 Metering Menu 3D and 2D Photo Capture The Metering setting will affect how your camera focuses when capturing an image Depending on your selection the camera will be more sensitive to focusing on particular areas in the display and adjust the image color and lighting accordingly Center Averages the light metered from the entire frame but giving greater weight to the subject in the center Multi Used in standard conditions the camera divides and adjusts the settings of the image into several zones for light metering such as complex light conditions position of subject brightness background direct light and scenes Spot Me
45. n the image with the selected ViviLink destination site Remember that the ViviLink feature is deactivated by default A ViviLink destination will only be assigned to a photo or video if you manually set it from this menu or from the ViviLink menu in Capture mode accessible with the ViviLink Quick Function button in Capture mode Changing the ViviLink destination site will also make the selected site the new default ViviLink option A new default can be selected at any time through this menu Protect Lock Menu 9 Pictures and Videos taken with your camera can be protected or locked to prevent any deletion or alteration being made to the files 55 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Protect Lock menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option Press the MODE button to exit the menu and return to your previous mode Any image that is locked will display a lock symbol on the LCD screen when viewing that image in the playback mode Videos that are not locked will not display the lock symbol Remember that you cannot delete locked videos 56 Installing the Software You must be connected to the internet to install and run the Vivitar Experience Image Manager software 1 Insert the installation CD into your CD ROM drive The inst
46. ncluded in order to view the scene on the LCD screen in 3D as you take your video 39 Video Capture Mode Quick Function Buttons Your digital camera has a four directional pad that functions as Quick Function buttons H Left Light Exposure Opens the Light Exposure menu n 3D Option Toggles between 3D and 2D image capture Up Delete Opens the Delete This Video option and allows you to U Down view and delete the last video taken as well as previously captured images Right ViviLink Opens the ViviLink for Videos menu Opens the menu options for Video Capture Mode Saves your selected menu option Note To navigate through the Menus use the UP DOWN LEFT RIGHT direction control buttons Toggles between the Video Capture Mode Photo Capture Mode and Playback Mode Exits the menu screen Hide Show the LCD Icons The display of the icons on the LCD screen can be hidden or visible as desired 1 Hold the MODE button for 2 seconds to hide the display of the icons on the screen 2 Press the MODE button again to redisplay the icons on the screen 40 Video Capture Mode Menus The following are the menus that appear in your camera s 2D and or 3D Video Capture Mode 3D Calibration Bu CB 3D Manual Shift Scene Orio Of Beach Image Sharpness 4 Normal e gt lt Sharp Date Time On i Date Setup Image Resolution VGA 640 x 480 Light Exposure T 3 Lightest fi E5 p
47. ode oaves your selected menu option Note To navigate through the Menus use the UP DOWN LEFT RIGHT direction control buttons 53 Video Playback Mode Menus The following are the menus that appear in your camera s Video Playback Mode for both 3D and 2D Video Capture Protect Lock Lock This Video Unlock This Video Lock All Images Delete ViviLink for Videos Delete This Video d Yi YouTube T Delete All Images Photobucket None oL Unlock All Images Delete Menu 1 While in the Playback Mode you can delete videos from your camera through the Delete menu 1 2 View the video you would like to delete Press the SET button to open the menus for the Video Playback mode gt C9 Press the LEFT or RIGHT direction control buttons to scroll and select the Delete menu Press the UP or DOWN direction control buttons to scroll through the menu options 5 To delete the selected photo Select Delete This Video and press SET button You will be asked to confirm the deletion of the photo e f you would like to proceed with deleting the current image select Yes and press the SET button to confirm The video will be deleted and you will exit the menu and return to the Playback mode e f you do not want to delete the current image select No and press the SET button The video will not be deleted and you will exit the menu and return to the Playback mode 6 To delete all the images
48. ontinue or No to exit the setup Note If you select No and decide to leave the camera setup the camera will be set to its default settings These settings can be adjusted at any time manually through the menus in the camera Setting the Date and Time The next step in the initial camera setup is to set the date and time on the camera Date Setup 12 00 00 M 01 01 20 0 Select S Set 9 Back oet the Date and Time as desired by pressing the RIGHT and LEFT direction control buttons to choose the specific setting and the UP and DOWN buttons to change each setting Once you have completed setting the time and date press the SET button to confirm the selection and move to the next part of the camera setup Setting the ViviLink Default Option Once the Date and Time have been set you will be asked to set the default ViviLink destination for photos and videos taken with your camera The ViviLink technology allows you to quickly and easily upload your camera s photos and videos to the social networks of your choice with the accompanying software application 1 First you will be asked to choose the default ViviLink social network for Photos Press the UP or DOWN buttons to highlight the desired default social network and press the SET button to confirm the selection 2 Next you will be asked to choose the default ViviLink social network for Videos Press the UP or DOWN buttons to highlight the desired default soci
49. ory card Keep in mind that formatting the memory card will permanently delete all of the content on your camera s memory card This option will delete all of the content at one time If you would like to delete individual images use the delete menu in the camera s Playback mode 1 Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Format Memory Card menu 3 Press the UP or DOWN direction control buttons to highlight the menu options 4 Toexit without formatting the card select Cancel and press the SET button 50 5 To proceed with the format select Yes and press the SET button You will be asked to confirm the formatting of the memory card e Select No to exit without formatting e Select Yes and press the SET button to begin The memory card will be completely formatted Firmware Factory Default Settings Menu si SD and 2D Photo Capture Use this menu to view the Firmware version on your camera or to reset your camera settings to the Factory Default Settings 1 A W N 5 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Firmware menu The Default Setting is selected Press the SET button to reset the camera to the factory default settings You will be asked to confirm the resetting to th
50. os menu to print the photos that are on your camera directly to a Pictbridge compatible printer 1 Scroll through your pictures and find the one you would like to print 2 Press the SET button to open the menus for the current mode 4 Press the LEFT or RIGHT direction control buttons to scroll and select the Print This Photo menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button when highlighting the Print This Photo option to print the selected photo 5 You will be asked to connect the camera to the Pictbridge printer 6 Connect the USB cable provided in the package from the camera to the Pictbridge port of the printer 7 Once connected follow the instructions on the printer to proceed with the printing process 8 Select the Cancel option to exit the menu and return to the previous mode 37 Slide Show Menu 3D and 2D Photos You can view a Slide Show of all the pictures taken with your camera by pressing the UP Quick Function button while in Playback mode The Slide Show menu allows you to set the interval length of time that each picture will display during the slide show 1 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Slide Show menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the
51. own Button ViviLink Right Button Flash USB Slot Tripod Socket Digital Lens SD Memory Card Slot Wrist Strap Connector Self Timer LED Speaker Microphone Initial Camera Setup Charging the Battery To charge your battery first connect the USB Cable to your camera Connect one end of the USB cable into the USB port on your camera Connect the other end of the USB cable to the USB port on your computer Charge the battery using the USB connection cable included and the AC Adapter included Connect one end of the USB cable into the USB port on your camera Connect the other end to the AC Adapter and then plug the AC Adapter into a power socket NOTE While charging the battery the LED light turns on The battery is fully charged when the LED light turns off Wait until LED lights OFF Battery Fully Charged Battery Power e Some features such as Flash will not work if the battery power level is low e When the battery power is low the battery icon turns red and the camera will automatically turn off a few seconds later e The energy status of the power is displayed on LCD as shown below Gi Full battery power C Medium battery power C Low battery power Installing the Memory Card Make sure an SD card has been properly inserted into your camera SD card not included To properly insert the SD Card Push the SD card into the slot in the direction shown on the camera see SD icon by t
52. quality level will also take up more memory on your camera Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Image Quality menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Q cctectec option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your previous mode An icon reflecting your selection will display on the LCD screen Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Self Timer Menu Q 3D and 2D Photo Capture The Self Timer menu allows you to set a delay between the time that the camera s Shutter button is pressed and the actual capture of the picture This is an optimal feature if you don t just want to take the picture but would also like to be in the picture yourself Just set the desired Self Timer delay press the Shutter button on your camera and position yourself in front of the camera as desired Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Self Timer menu Press the UP or DOWN direction control buttons to scroll through the menu options
53. s the camera to use a subject s face as the basis for balancing the other colors and focus in the camera s display This feature is meant to ensure that the color and focus of your pictures will be consistently sharp and high quality Note To properly use the Face Detect option please ensure the following e Anti Shake Ensure that the Anti Shake option is set to On The Anti Shake option is On by default when you start using your camera and assists you in properly focusing the image e Distance from the camera The subject s face must be no further than 8 to 9 feet 3 5 meters from the camera and the face must cover at least 2096 1 5 of the picture as seen on the LCD screen e Facing the camera The face of the subject s you are photographing must be facing the camera and must hold the pose for at least 4 to 5 seconds until the green square s appears around the subject s face Face Detect will not work with a side shot of the subject s head 21 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Face Detect menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Qe option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item Press the MODE button to exit the menu and return to your prev
54. ss the LEFT or RIGHT direction control buttons to scroll and select the Date Time menu Press the UP or DOWN direction control buttons to highlight the Date Setup menu option then press the SET button to select the option The Date Setup submenu will open scroll through the window with the RIGHT and LEFT navigation buttons For each field in the menu use the UP and DOWN navigation buttons to set the date and time When you have finished setting the date and time press the SET button to save your settings and return to the previous mode Press the MODE button to exit the menu without saving your settings and return to your previous screen Auto Power Off Menu 3D and 2D Photo Capture You can use the Auto Power Off feature in order to conserve you camera s battery life The designated time represents when your camera will automatically power off When the camera sits idle for the designated period of time the camera will shut off completely and will need to be turned on again with the power button before the next use Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the Auto Power Off menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Q ciectea option icon will appear on the selected item Press the LEFT or RIGHT button to select the ne
55. t unlock the image then select delete e f you do not want to delete all of your videos and photos select No and press the SET button All images will remain on your SD card and you will exit the menu and return to the Playback mode ViviLink for Photos Menu 3D and 2D Photos The ViviLink technology allows you to quickly and easily upload your camera s photos and videos to the social networks of your choice with the accompanying Vivitar Experience Image Manager application 1 Co N 4 9 10 Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the ViviLink menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select the desired option A Q ciectea option icon will appear on the selected item An icon will appear on the image with the selected ViviLink destination site when you return to the Playback display Remember that the ViviLink feature is deactivated by default A ViviLink destination will only be assigned to a photo or video if you manually set it from this menu or from the ViviLink menu in Capture mode accessible with the ViviLink Quick Function button in Capture mode Changing the ViviLink destination site will also make the selected site the new default ViviLink option A new default can be selected at any time through this menu Press the LEFT or RIGHT
56. ters the area within the spot point frame at the center of the LCD to set the exposure on the subject in the center of the monitor Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Metering menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select and save the desired option 5 A Quee option icon will appear on the selected item Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode Anicon reflecting your selection will display on the LCD screen Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Language Menu 3D and 2D Photo Capture You can select your camera s language setting by selecting the desired language from the Language menu 1 Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Language menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select and save the desired option 26 A Q cctectec option icon will appear on the selected item 9 6 Press the LEFT or RIGHT button to select the next menu item 7 Press the MOD
57. ur button on the application s Home page Transferring Images from my Camera to my Computer Manually Transferring Photos and Videos WINDOWS Use the USB cable that came with your camera to connect your camera to your computer MSDC appears on the LCD A window appears with a list of options select Open folder to view files and click OK Open the DCIM folder and the folder inside to view the media files select the media and copy the files from this folder into your computer Optionally select the files and choose Copy from the Edit menu Then select a folder and choose Paste from the Edit menu We recommend that you copy the images into the Pictures My Pictures folder and the videos into the Videos My Videos folder Do not disconnect the cable during transfer Doing so will cancel the transfer of any files on their way to your computer 60 Transferring Photos and Videos MACINTOSH Use the USB cable that came with your camera to connect your camera to your computer MSDC appears on the LCD The camera s device icon appears on the desktop Click on the device icon and open the DCIM folder and the folder inside to view the media files Select the files and drag them into your computer Optionally select the files and choose Copy from the Finder s Edit menu Then select a folder and choose Paste from the Edit menu We recommend that you copy the images into the Pictures folder and the videos into the Movies folder
58. ures from your camera through the Delete menu 1 2 View the photo you would like to delete Press the SET button to open the menus for the Photo Playback mode gt C9 Press the LEFT or RIGHT direction control buttons to scroll and select the Delete menu Press the UP or DOWN direction control buttons to scroll through the menu options 5 To delete the selected photo Select Delete This Photo and press SET button You will be asked to confirm the deletion of the photo e f you would like to proceed with deleting the current image select Yes and press the SET button to confirm The photo will be deleted and you will exit the menu and return to the Playback mode e f you do not want to delete the current image select No and press the SET button The photo will not be deleted and you will exit the menu and return to the Playback mode 6 To delete all the images videos and photos you have saved on your SD Memory card Select Delete All Images and press the SET button e f you would like to proceed with deleting all the videos and photos select Yes and press the SET button to confirm 34 All of your images will be permanently deleted A blank No Files Exist screen will appear Press the MODE button to exit the No Files Exist screen and return to Photo Capture mode Remember All images will be deleted except images that are Protected Locked To delete a locked image firs
59. utton twice to open the Playback mode for photos and videos You can scroll through the photos and videos that you ve previously taken to view edit or delete them as desired To access the various menus for the Playback mode for photos and videos press the SET button while in the Playback mode Camera Technical Specifications Image Sensor CMOS Sensor 4032 x 3024 12M 3648 x 2736 10M 3456 x 2592 9M 3264 x 2448 8M 3648 x 2048 7M HD 2592 x1944 5M 2048 x1536 3M 1920 x 1080 2M HD 640 x 480 VGA Video Resolution 640x480 pixels VGA 320X240 pixels QVGA File Format JPEG Photo AVI Video External Memory SD Card up to 32GB LCD Display 2 Inch TFT LCD Len 57 mm F2 8 Image Resolution Zoom 4X Digital Zoom Exposure amp 0EV 3 0EV White Balance Auto Daylight Cloudy Fluorescent Incandescent SO Auto 100 200 400 Auto Scenery Portrait Night Scenery Night Portrait Scene High Sensitivity Beach Flash No Flash Forced On Auto Flash Red Eye Reduction Self Timer Anti Shake Face Detect 2 5 or 10 second delay Yes Photo Capture Mode e e lt o lt o e o Microphone opeaker Yes USB 2 0 Windows XP SP 3 Vista SP1 and 7 Mac OSX v10 5 x and above Built In Lithium ion Battery 0 40 C 3 Au D em I Q 1 O ae D O rr O N lt System Requirements UU D lt O x A gt e Sy 3 o D x Q
60. videos and photos you have saved on your SD Memory card Select Delete All Images and press the SET button e f you would like to proceed with deleting all the videos and photos select Yes and press the SET button to confirm All of your images will be permanently deleted A blank No Files Exist screen will appear Press the MODE button to exit the No Files Exist screen and return to Photo Capture 54 mode Remember All images will be deleted except images that are Protected Locked To delete a locked image first unlock the image then select delete e f you do not want to delete all of your videos and photos select No and press the SET button All images will remain on your SD card and you will exit the menu and return to the Playback mode ViviLink Menu The ViviLink technology allows you to quickly and easily upload your camera s photos and videos to the social networks of your choice with the accompanying Vivitar Experience Image Manager application Press the SET button to open the menus for the current mode Press the LEFT or RIGHT direction control buttons to scroll and select the ViviLink menu Press the UP or DOWN direction control buttons to scroll through the menu options Press the SET button to select and save the desired option A Q ctectea option icon will appear on the selected item Press the MODE button to exit the menu and return to your previous mode An icon will appear o
61. wnloading your photos to your computer as soon as possible to prevent unintentional data loss Q I deleted images using the Vivitar Experience Image Manager The images were also deleted from my computer How do I recover images that accidently deleted All images deleted using the Vivitar Experience Image Manager are sent to your computer s Recycle or Trash Bin and can be retrieved from there VT135071111ver1 FW 150G6DMD4202F16 TA 63
62. xt menu item Press the MODE button to exit the menu and return to your previous mode Hemember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings 49 Frequency Menu 2 3D and 2D Photo Capture The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale If your camera is set to a frequency that does not match your country s electric current you may see flickering or waves on the images taken by your camera 50Hz UK Europe and Australia 60Hz US Canada and South America Press the SET button to open the menus for the current mode 2 Press the LEFT or RIGHT direction control buttons to scroll and select the Frequency menu 3 Press the UP or DOWN direction control buttons to scroll through the menu options 4 Press the SET button to select and save the desired option 5 A Qcctectec option icon will appear on the selected item 6 Press the LEFT or RIGHT button to select the next menu item 7 Press the MODE button to exit the menu and return to your previous mode 8 Remember that this setting will be saved by your camera until you manually change the setting or restore the camera s default factory settings Format Memory Card Menu 3D and 2D Photo Capture You can use the Format Memory Card menu to delete all of the content that is currently on your camera s mem

Vivitar T135

Contents

Download Pdf Manuals

Related Search

Related Contents