Philips 8000 series LED TV 46PFL8577
Contents
1. PHILIPS Portal is property of PE Electronics Ltd PHILIPS portal will be time to time upgrade to provide better Internet experience to user Recommended Data Card e Idea Netsetter TATA Photon Reliance Netconnect Recommended Wi fi Dongle Use Philips specific Wi fi dongle to connect TV with Wi fi connection 7 Play photos music and videos 72 Listen to music on USB storage devices l 1 Inthe USB browser select Music then press OK Caution 2 Select a music track or album then press Philips is not responsible if the USB storage OK to play device is not supported nor is it responsible for damage or loss of data from the device Realize mp3 Note When USB is connected TV set will go to USB source after every stand by 2 All Tracks folders 7 3 Change music settings While you play music press z OPTIONS to access one of the following settings then press OK l e Stop playback Stop music play e Repeat Play once Play a song once or repeatedly 7 1 Connect a USB BrOnage device Shuffle On Off Shuffle the songs to play photos music or videos Show info Display the file name stored on it Sound Change sound settings l Switch on the TV l Connect the USB device to the USB port 1 4 Playing music while viewing slideshow on the side of your TV You can view slideshow and play background 3 Press f music at the same ti2. The standby light on the TV blinks red e Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the TV lock feature e Enter 3693 When turning the TV on off to standby you hear a creaking sound from the TV chassis e No action is required The creaking sound is normal expansion and contraction of the TV as It cools down and warms up This does not impact performance Cannot remove e sticker banner displayed on the TV e To remove the logos and images set the location of your TV to home 1 Press f 2 Select Setup gt TV settings gt Preferences gt Location 3 Select Home and pressOK 8 2 TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected 8 3 Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV e Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try
3. 18 EN 4 34 Rearrange channels After you install channels you can rearrange the order in which they appear 1 While you watch TV press OK The channel matrix menu is displayed 2 Press OPTIONS The channel options menu appears 3 Select Reorder then press OK Select the channel to rearrange then press OK The selected channel is highlighted 5 Move the highlighted channel to its new location then press OK 6 Press z OPTIONS 7 Select Done reordering then press OK 4 35 Use Philips EasyLink Get the most out of your HDMI Consumer Bound Bato DeacclOfi Electronic Control CEC compliant devices EasyLink with Philips EasyLink enhanced control arden ders AA features 3D Device Control Keys If your HDMI CEC compliant devices are Preferences Device Search connected through HDMI you can control Factory Settings Device tit them at the same time with your TV remote Reinstall TV control To enable Philips EasyLink you need to Connect HDMI CEC compliant devices through HDMI Configure each HDMI CEC compliant 4 37 Switch the device ON or OFF device properly e Switch on EasyLink When an HDMI CEC compliant device is connected and TV switches to standby the device gets turned OFF automatically Note The EasyLink compliant device must be switched on and selected as the source Philips does not guarantee 100 1 Pres ff interoperability with all HDMI CEC devices 2 Select Setu
4. Risk of electric shock or fire e Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weighs more than 25 kg or 55 Ibs e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall m
5. Balance Adjust the balance of the right and left speakers AV Out Select Fixed for default Settings and variable to vary it e Equalizer Adjust the equalizer on various frequencies 4 12 Use smart sound Use smart sound to apply pre defined sound settings Ch tp 2k Smart Picture Smart Sound 3D format 12 EN Press tt ADJUST Select Smart sound then press OK e Press any key except vol and mute on Select one of the following settings then remote to release the set from mutescreen Note press OK Cinema Ideal settings for movies Standard Settings that suit most 4 14 Create and use lists of environments and types of audio favorite channels News Ideal settings for spoken audio l such as news You can create a list of your preferred TV Personal Apply the settings that were channels so that you can find those channels customised in the sound menu easily Mark as Favorite 4 13 Use the Options menu Rename Channel Reorder Hide Channel Status Show Hidden Ghannels Ecology 13 View only the list of favorite channels Visit options relevant to current action or selection 1 While you watch TV press OK 1 While you watch TV press The channel matrix menu is displayed E Press OPTIONS TheTV options menu appears Select Select list gt Favorite then 2 Select one of the following options then press OK press OK Only c
6. 4 VOL 8 SOURCE i 9 STANDBY B Connectivity POWER QD o o VGA AUDIO IN 10 AC POWERIN 17 SMART CARD IN 11 IF IN 18 VGA AUDIO IN 12 RF IN 19 AV OUT 13 VGA IN 20 YPbPr 14 HDMI 1 21 AV2 IN 15 HDMI 2 22 AV1 IN 16 USB 23 ETHERNET Note Above sketch and connectivity are just for representation actual product may look different EN 5 3 2 Name and Function of Control on Remote s d2h INFO amp 9 Co 9 Of ee DIAA sese 1 b Standby On e Switch the TV ON or OFF The TV is not powered off completely unless it is physically unplugged FAVORITE e Access the favorite channels 2 in DTH menu 3 X EXIT e Exit from any ATV or DTH menu in one click 4 tt ApjUsT e Access the menu to adjust settings CH CH Switch channels b e Return to the previous menu K e Mute or restore audio e Adjust volume 0 9 Numeric buttons Select channels ACTIVE e View the Active Services in DTH OPTIONS e Access options for the current activity or selection d2h Menu e Access the DTH menu SWAP Swap between two channels OK e Confirm an entry or selection In USB it functions as Play Pause G GO GQGOcCc0 gt A lt v Navigation buttons e Navigate through menus and select items gt In USB it functions as Fast Forward lt In USB it functions as Fast Reverse
7. and sound settings and access other features 1 Press f The menu screen appears Select one of the following then press OK e Watch TV If a source other than antenna is selected switch back to the antenna source e Browse USB View photos and play music and movies contained in USB storage devices e Scenea Switch on Scenea wallpaper e Add new device Add new devices to the home menu e Setup Access menus to change picture sound and other settings 3 Add device to the home menu After you connect a device add it to the home menu e Press A e Select Add new device e Follow the onscreen instructions to add the device to the home menu The device is displayed in the home menu e To watch the device switch it on then select it in the home menu e You can also select the device with the source button 4 2 Rename devices from the home menu After you add a new device to the home menu you can rename it to your preference 1 Press ft 2 Select a device to rename 3 Press OPTIONS Theoptions menu appears 4 Select Rename device then pressOK Atext input box appears 5 Select characters thenoress OK to confirm 6 When the new name is complete select Done then pressOK EN 9 4 3 Remove devices from th 4 5 Use settings assistant home menu Use the settings assistant to guide you If a device is no longer connected to the TV thr
8. off To conserve energy set the TV to switch off automatically after a period of inactivity e Channel information size Change the type of information that is displayed when you switch channels e TV position Apply the best settings for your TV based on how it is mounted 4 28 Start aTV demo You can use demonstrations to better understand the features of yourTV Some demos are not available on certain models Available demos are displayed in the menu list 1 While you watch TV pres 2 Select Setup Watch demo 3 Select a demo and pressOKto view it 4 29 Reset the TV to factory 4 32 Manually install channels settings You can restore the default picture and sound settings of your TV The channel installation settings remain the same a Picture Sound Only Picture and sound settings are reset to the factory settings The channel installation will not be changed Reset Cancel Reinstall TV Press ft 2 Select Setup TV settings gt Factory settings then press OK 3 Enter the PIN code with a default value of 8888 select RESET press OK to start resetting previous settings 4 30 Install channels The first time you set up yourTV you are prompted to select a menu language and to install TV Afterwards you can re install and fine tune channels 4 31 Automatically install channels 1 Press f 2 Select Setup gt Search for channel then pressOK Channel Inst
9. on Internet Service Provider Philips does not guaranteed to support all Data cards IP address and other settings for Internet connection will be provided by Internet Service Provider 22 EN 6 2 Connect to Network 1 Press f 2 Select Setup Select Connect to Network Mail This function is used to check emails Follow the onscreen instruction to view emails e Chat This function is used to do chat with preloaded Chat Options Also user can add New Chat account in this function e Web This function is used to surf the Web User can access any website through Web Browser e File Sharing This function is used to access media files from specific Mobile Computer Laptop which is connected in Network sharing It require IP address of other device which user user want to access the media files User can access only Photos Music and Videos in File Sharing function User can access only those formats which are supports in USB e UPnP This function is used to access media files from Mobile Computer Laptop which is connected in Network sharing TV will detect all devices which are present in Network sharing of Local Area Network PHILIPS Portal This function has predefine Apps like Social Network Weather News Games Internet Radio Maps etc User can go to PHILIPS Portal and directly access above mentioned Apps User can visit Apps gallary to access more Apps
10. the TV clock 1 While you watch TV press OPTIONS The options menu is displayed Select Clock Press OK Note WW N To disable the clock repeat the procedure 14 EN 4 18 Use timers You can set sleep timers to switch the TV to standby at a specified time Set the TV clock before you use timers 4 19 Automatically switch the TV to standby sleep timer Sleep timer switches the TV to standby after a pre defined duration You can switch off your TV earlier or reset the sleep timer during the countdown Press ft Select Setup TV settings gt Preferences Sleep timer The Sleep timer menu appears N e 3 Select a value between zero and 180 minutes If you select zero the sleep timer switches off 4 Press OK to switch on the sleep timer TheTV switches to standby after the specified time 4 20 Lock unsuitable content You can prevent your children from watching certain programmes or channels by locking the TV controls Channel Installation Channel Lock Child Lock Video Lock Front Panel Lock Change Code m Cl Cl Cl Ll C Cl 4 21 Lock or unlock one or more Channels 1 Press ft Setup Channel settings gt Child lock Channel lock Alist of channels is displayed 2 Select the channel that you want to lock or unlock then press OK The first time you lock or unlock a channel you are prompted to enter your PI
11. to separate contract with the service provider On purchase of the product Subscription of DTH service is not mandatory Product disposal Guidelines For the purpose of recycling to facilitate effective utilization of resources please return this product to a nearby authorized collection center registered dismantler recycler service center when disposing of this product In case of further assistance you may contact nearest authorized service center Or Please see the Company website for further information on collection centers etc Visit http www philips com OR Standard Call Rates Apply 1860 180 1111 Toll Free Number 1800 102 2929 aoe ar card T NT FAM g YA aHT xb Wa d zu Sume Hl SIA freed f are dix dein erp at Renee GH uve A mu m lattes smart Rm Aea aapa ufu dex Gar ts d dub ae lor einen Sat menfa at d afte crear fee goa se A Ava 3d Visit http www philips com OR Standard Call Rates Apply 1860 180 1111 Toll Free Number 1800 102 2929 7 ROMS 4 EN 3 Useyour TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome 3 1 Nameand Function of Control on Set 46PFL8577 V7 A TV Controls and Indicators 1 LED INDICATOR 5 CH 2 IRSENSOR 6 CH 3 VOL 7 MENU
12. to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Check the signal output of the device EN 25 8 4 Sound issues There is a picture but no sound is there If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction Check that all cables are properly connected Check that the volume is not set to O Check that the sound is not muted There is a picture but the sound quality is poor Check that the sound settings are correctly set There is a picture but sound comes from one speaker only Verify that sound balance is set to the centre 8 5 HDMI connection issues There are problems with HDMI devices Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a T
13. 3D Input Format Select below input format for 3D content Play e Side by Side Select this option when 3D content is Side by Side to get the proper 3D picture Top Bottom Select this option when 3D content is Top Bottom to get the proper 3D picture e Frame Packing This function is used to watch Frame Packing 3D content e 3D Input Formats are only available in USB HDMI and DTH source 3D Swap This function is used to adjust 3D effect by Normal Swap function 3D Video Depth This function is used to change 3D Depth when you convert 2D content into 3D EZ Note 3D Video Depth is applicable only for Auto 2D to 3D mode and applicable only in RF AV amp YPbPr sources Optimal 3D viewing For an optimal 3D viewing experience recommend that you 1 sit at least 3 times the height of the screen away from the TV but no further than 6 meter away 2 avoid fluorescent lighting such as TL lighting or certain energy saving light bulbs which operate on a low frequency and direct sunlight as they may interfere with 3D experiences 3D Health warning 1 If you or your family has a history of epilepsy or photosensitive seizures consult a medical professional before exposing yourself to flashing light sources rapid image sequences or 3D viewing 2 To avoid discomfort such as dizziness headache or disorientation we recommend not watching 3D for extended periods of time 3 If you exper
14. 8 x 44 x 662 mm e Weight 27 5 kg EN 29 Consumer Guidelines 1 Kindly ensure that the dealer fills up Warranty card correctly 2 To avail the Warranty please register your product with the Philips e Log on to www Philips com OR e Contact Philips Consumer Care Centre 3 In the unlikely event of a defect developing in the TV set contact the Philips Customer Care Centre for obtaining warranty service and inform of the defect observed in the set the type no and serial no of the set 4 On your lodging a complaint a trained technician will call on you promptly In the event of the technician deciding that set requires attention at the service station the technician would arrange to get the set picked up to be delivered to service station for further attention Homecalls by the technician would however be restricted within the municipal limits of the city town in which the set has been registered Type no Serial No __ Date of Purchase Purchased By Name Address Tel No Sold by Name Address Tel No PHILIPS Model no 46PFL8577 V7 Sold by User rubber stamp Serial no o Contact Customer Service Executive at 1860 180 1111 Standard Call Rates Apply 1800 102 2929 Toll Free No Regd Office PE Electronics Ltd Auto Cars Compound Adalat Road Aurangabad 431005 30 EN WARRANT Y This TV receiver is covered under From whom the set has been purchased or warranty against any defect arising out
15. AV In USB navigate through menu pages tracks albums or folders ff ATV Menu Analog TV Menu e Access the ATV menu Color buttons Only in DTH source e Select tasks or options d2h e Access DTH source directly from any other source INFO e View Info about DTH channels and current source LANGUAGE e Toggle DTH language between English and Hindi MOSAIC View channels in PIP e Access Mosaic menu of DTH 22 amp SOURCE e Select connected devices 3 3 Remote control usage When you use the remote control hold it close to the TV and point it at the remote control sensor Make sure that the line of sight between the remote control and TV is not blocked by furniture walls or other objects EN 7 3 4 Battery Installation 1 Remove the battery compartment door 2 Install 2 AAA or UM 4 1 5V batteries or equivalent with the correct polarity as indicated 3 Refix the battery compartment door NOTE Remove batteries when they are exhausted or if the remote control is not to be used for a long time BATTERY PRECAUTIONS Incorrect use of batteries can cause electrolyte leakage which will corrode the remote handset or cause the batteries to burst Replace both batteries at the same time e Don t mix battery types alkaline with carbon zinc etc Don t recharge 4 Use more of your IV 4 1 Main Menu Menus help you to install channels change picture
16. Celsius e Power consumption e 46PFL8577 V7 250W EN 27 9 5 Multimedia Supported storage device USB only FAT or FAT32 USB storage devices are supported File Type File Format File suffix Video MPEG1 MPEG2 MPEG4 MOV AVI MPG MOV MKV MP4 WMV WMA MP3 WMA MP3 Image Formats Details Compressed Format Support Range Progressive JPEG Only Support 1024x768 JPEG 1920X1080 ee ome suos Audio Formats Details File Format Sampling Baud Rate Audio Channel 8K 48KHz 32K 320Kbps Mono Stereo 32K 48KHz 32K 320Kbps Mono Stereo Video Formats Details File Format Support Suffix Internal Encoder ee p NIPEGA AVIN MPA NENNEN MKV MOV MPEG1 2 4 A Note The multimedia feature function may vary from file to file depending on relative informatio present in the file 28 EN 9 6 Supported TV mounts To mount the TV purchase a Philips TV mount or a compatible TV mount A Warning Follow all instructions provided with the TV mount PE Electronics Ltd bears no responsibility for improper TV mounting that results in accident injury or damage TV screen Required Required mounting size pitch mm bolts inches 46 400 x 400 4 x M5x12 9 7 Product specification Design and specifications are subject to change without notice 46PFL8577 V7 e With TV stand Dimension WxDxH 1088 x 295 x 705 mm e Weight 32 2 kg e Without TV stand e Dimension WxDxH 108
17. N code 3 Enter your code and pressOK Ifthe channel is locked a lock icon is displayed in channel grid 4 Repeat the process to lock or unlock more channels 4 22 Lock or unlock one or more Sources 1 Press ft gt Setup Channel settings gt Child lock Video lock A list of sources are displayed 2 Select the source that you want to lock or unlock then press OK The first time you lock or unlock a source you are prompted to enter your PIN code 3 Enter your code and press OK If the source is locked a lock icon is displayed in source list 4 Repeatthe process to lock or unlock more sources 4 23 Lock or unlock front panel Press ft Setup Channel settings gt Child lock Front Panel lock Select ON and pressOK The front panel is locked now Only remote can be used for operation Set will get released from standby using touchpad even if front panel lock is ON Note 4 24 Set or change code 1 Press f 2 Select Setup Channel settings gt Child lock 3 Select Set code or Change code The Set code Change code menu appears 4 Enter your code using the Numeric buttons Follow the on screen instructions to create or change your PIN code sk Tip e If you forget your code enter 3693 to override any existing codes EN 15 4 25 View Scenea You can display a default picture as the wallpaper on yourTV If the sle
18. PHILIPS Shield Emblem are registered trademarks of Koninklijke Philips Electronics N V and are used under license from Koninklijke Philips Electronics N V www philips com
19. Register your product and get support at www philips com welcome 46PFL8577 V7 EN User manual PHILIPS Contents 1 Notice 2 Important Product Disposable Guidelines 3 Use your TV 4 Use more of your TV 5 3D Feature 6 Use of Internet 7 Play photos music and videos on USB storage devices 8 Troubleshooting 9 Product information 10 Consumer Guideline 11 Warranty 21 22 23 25 27 30 31 EN 1 Notice Pixel characteristics This LCD LED product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction 2 EN Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centres and official repair shops Failure to do shall void any warranty stated or implied Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Note Disclaimer DTH service partner Videocon d2h 2 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety
20. V to display content from a HDMI device If the TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again If there are intermittent sound disruptions check that output settings from the HDMI device are correct If you use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected t amp v IN 8 6 Computer connection issues The computer display on the TV is not stable Check that your PC uses the supported resolution and refresh rate Select the Auto Adjust function 1 Press ft 2 Select Setup gt TV Settings gt Preferences Auto Adjust 26 EN 8 7 DTH connection issues The DTH display not come on TV screen Check if the DTH cable is inserted properly Check if the Smart Card is inserted in given direction in CI Slot Check you recharge validity Please follow Onscreen instructions for DTH related connection issues Note 8 8 Internet issues Internet is not working properly Check if the Ethernet cable is inserted properly Check if Network settings are given properly Check if TV is placed within Wireless range Check if Wireless settingsares inserted properly Check if Data card settings are proper 8 9 3D working issues Check you are using provided 3D glasses Check if 3D settings in TV sets are set properly 8 10 Contact us If you cannot re
21. access to picture and sound settings e Contrast Adjust the intensity of backlight areas while the video contents are kept unchanged Brightness Adjust the intensity and details of dark areas e Color Adjust color saturation e Sharpness Adjust sharpness in the image e Hue Compensate for color variations Available only for NTSC channels 10 EN Noise reduction Filter and reduce 1 Press tt ADJUST noise in an image Temporal Noise reduction Select Smart picture then pressOK Recommended for analog sources 3 Select one of the following settings then e MPEG Noise reduction press OK Recommended for digital sources Personal Apply your customised Color Temperature Adjust the color picture settings balance in an image Cinema Ideal settings for movies Perfect Pixel HD To enhance the Sport Ideal settings for sport picture quality e Vivid Rich and dynamic settings HD Natural Motion Minimize ideal for daytime l l l juddering effects and enhance Bright Ideal settings for night time picture smoothness e Dynamic contrast Enhance contrast Medium setting is recommended Dynamic backlight Adjust brightness of the TV backlight to match lighting conditions 4 8 Change picture format Color enhancement Make 1 Press tit ADJUST prid pi Adda 2 Select Picture format then pressOK pxichahicdo EE DOT Orr 3 Select any pictur
22. allation Analogue Manual ante Find Channel Child Lock Fine Tune Fine Tune Store Current Channel Store as new channel Step 1 Search and store new TV channels 1 Press ft 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual antenna installation gt Find channel then pressOK e If you know the three digit frequency of the channel enter it e To search select Search then press OK 3 When the channel is found select Done then press OK e To store the channel as a new number select Store as new channel then pressOK e To store the channel as the previously selected channel select Store current channel then press OK EN 17 Step 2 Fine tune analogue channels Press ft Select Setup gt Channel settings gt Channel installation Analogue manual install Fine tune then press OK 3 Press v to fine tune the channel When fine tune is complete Select Done then press OK 4 33 Rename channels You can rename channels The name appears when you select the channel 1 While you watch TV press OK The channel matrix menu is displayed 2 Select the channel to rename 3 Press OPTIONS The channel options menu appears 4 Select Rename channel then press OK A text input box appears 5 Press v to select each character then press OK 6 When the name is complete select Done then press OK
23. ay e OK to play e I to pause e I4or bI to play the previous or next photo 7 9 Change slide show settings 1 While you view a slide show press OPTIONS The slide show options menu is displayed 2 Select one of the following then press OK e Start Stop slideshow Start or stop slideshow e Slideshow transitions Set the transition from one picture to the next e Repeat Play once Play once or repeatedly e Rotate image Rotate photo e Show info Display the picture name date size and next picture in the slide show Note Rotate image and Show info appear only when the slideshow is paused 7 10 Disconnect a USB storage device Caution e Follow this procedure to avoid damage to your USB storage device 1 Press 5 to exit the USB browser 2 Wait for five seconds then disconnect the USB storage device 8 Troubleshooting This section describes commonly encountered issues and accompanying solutions 8 1 General TV issues TheTV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor lens
24. ccess to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage e Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Pictures and drawings shown in this user guide book are just for representation Screen care e Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e To avoid deformations and colour fading wipe off water drops as soon as possible Note Actual Product may look different than representation amp Subscription of DTH service is subject
25. e format then press OK s Picture Format Change the picture format H Position Adjust the horizontal position of image Only in VGA e V Position Adjust the vertical IT position of image Only in VGA 4 7 Use smart picture Use smart picture to apply pre defined picture settings Picture Format Picture Shift Note e Picture format cannot be adjusted in d2h source Ch 6D Picture format will be available depending on source Smart Picture Smart Sound 3D format EN Lt 4 10 Use picture shift 4 11 Manually adjust sound settings Only in VGA 1 Press tH ADJUST Picture Smart Sound em 2 Select Picture shift then press OK iine Reset Standard 3 Shift the picture then pressOK EasyLink Loudness News 3D Incredible Surround Personal Preferences Auto Volume Levelling Factory Settings Balance Reinstall TV AV Out Equalizer E39 CC 1 Press Select Setup gt TV settings gt Sound Picture Format Picture Shift then pressOK 3 Select one of the following settings then press OK H Note e Smart sound Access predefined smart sound settings This menu can be accessed only in VGA source Reset Reset to factory default settings e Loudness Enhance the volume without disturbing sound quality Incredible Surround Switch On Spatial Sound e Auto volume levelling Automatically reduce sudden volume changes for example when switching channels
26. ep timer is off the wallpaper is displayed for 240 minutes Otherwise it is displayed for the duration of the sleep timer 4 26 Switch on Scenea 1 Press f 2 Select Scenea then pressOK The default picture is displayed 4 27 Change TV preferences Menu Language Picture Sound Sleep Timer EasyLink Location 3D World Clock Preferences Eye Care View Factory Settings Program Edit Reinstall TV Volume Bar 1 Press f 2 Select Setup gt TV settings gt Preferences 3 Select one of the following then press OK Menu language Select a menu language e Phase Adjust the phase of image Only in VGA e Manual Clock Change the position of picture Only in VGA e Auto Adjust Adjust the viewing format automatically to fit the size of screen Only in VGA Sleep timer Switch the TV to standby after a pre defined duration 16 EN e Location Optimise TV settings for your location home or shop E sticker For shop mode only Switch the e sticker on or off e World Clock View the day and time of cities across the world o Eye Care View Adjust the backlight of TV according to the viewing distance BMI Body Mass Index Calculate your BMI by inputting your weight and height Program Edit Set favorite hide rename and reorder channels Only in TV source e Volume bar Display the volume bar when you adjust the volume e Auto switch
27. hannels in the favorite list Clock Display time appear in the channel grid e Status Display information concerning currently viewing channel The favorite channel grid is empty until you Ecology Relevant setups add channels into the favorite list Note Energy Saving This conserves most energy 4 15Hide Unhide channels Select Low Mid or High Set ALIM Mid While you watch TV press OK Mute Screen The TV The channel matrix menu is displayed display will turn off Conserves maximum energy 2 Press OPTIONS kK Tip 3 Select Hide channels or Unhide channels Select the channels which want to Hide or Unhide Note e After doing hide channels H symbol will e Status is not available in d2h source appear on Channel Matrix EN 13 4 15 View all channels You can exit the favorite list and view all installed channels 1 While you watch TV press OK The channel matrix menu is displayed OPTIONS Select Select list gt All then press OK All channels are displayed in the channel grid Press Note All favorite channels are marked by an asterisk when you view the channel grid 4 16 Manage the favorite list 1 While you watch TV press OK The channel matrix menu appears Press OPTIONS Select Mark favorite Unmark favorite then pressOK The channel is marked or unmarked from the favorite list W N 4 17 Display
28. ience any discomfort stop watching 3D and do not immediately engage in any potentially hazardous activity for example driving a car until your symptoms have disappeared If symptoms persist do not resume watching 3D without consulting a medical professional first 4 Parents should monitor their children during 3D viewing and ensure they do not experience any discomfort as mentioned above Watching 3D is not recommended for children under 6 years of age as their visual system is not fully developed yet 5 Do not use the 3D glasses for any purpose other than watching 3D TV Source Support list 1 2D to 3D supported in all sources except VGA 2 Side By Side and Top Bottom supported in HDMI amp USB Source Only 3 3D Mode is not supported in VGA mode EN 21 6 Use of Internet A Na Quick Picture and Search for Channels Connect to Watch demo Sound Settings Network TV Settings Channel Settings Network Settings Software Settings 6 1 Network Settings 1 Press f 2 Select Setup gt Select Network Settings Wired Select this option to do Wired network settings Follow the instruction displayed on TV screen Wireless Select this option to do Wireless network settings Follow the instruction displayed on TV screen e Data card Select this option to use Data card Note To get the better Internet connectivity use Broadband Internet connection Speed of internet access is depends
29. me Select Browse USB then pressOK l Select one music album The USB browser appears 2 Press OK 3 Press gt to go back to the USB browsing page Select one photo album 5 Press OK to start playing the slideshow EN 23 7 5 Watch video 1 In the USB browser select Video then press OK Press OK to play To control play press the play buttons e OK to play pause e 4 orbI to play the previous or next video 7 6 Change video settings While you play video press OPTIONS to access one of the following settings then presOK Stop playback Stop video play Repeat Play once Play once or fd E l Shuffle On Off Shuffle the videos Full Screen Small Screen Select screen size for playing Show info Display the file name Smart Sound Select predefined Smart Sound Smart Picture Select predefined Smart Picture 3D Change 3D settingsfor 3D video Note e 3D option will available only when 3D content is played 7 7 View photos In the USB browser select Picture then 1 p ress OK Select a photo or a photo album then p ress OK to view the photo enlarged to fill the TV screen To view the next or previous photo press gt lt 7 8 View a slide show of your photos 24 1 When a full screen image of a photo is displayed pressOK A slide show begins from the selected photo Press the following buttons to control pl
30. ough the picture and sound settings remove it from the home menu 1 Press f 2 Select Setup Quick picture and 1 Press ft sound settings then pressOK 2 Select a device to remove 3 Select Continue then pressOK 3 Press OPTIONS The Settings assistant menu 4 Select Remove device then pressOK appears 5 Select Remove then pressOK 4 Follow the onscreen instructions to The selected device is removed from choose your preferred picture settings the home menu 4 4 Change picture and sound 4 6 Manually adjust picture settings settings Change picture and sound settings to suit your preferences You can apply pre defined settings Picture Picture Personal or change settings manually omg Quick Picture and Search for Channels Connect to Watch demo Sound Settings Network Sound rwm Cinema EasyLink Contrast Sport 3D Brightness Vivid Preferences Colour Bright Factory Settings Sharpness Reinstall TV Hue Noise Reduction j 1 Press TV Settings Channel Settings Network Settings Software Settings 2 Select Setup gt TV settings gt Picture then pressOK 3 Select one of the following settings then press v to navigate and press OK Note to adjust Smart picture Access predefined smart While you watch TV or external devices press picture settings mo doncc Mapa e Reset Reset to factory default settings Smart sound for quick
31. ount PE Electronics Ltd bears no responsibility for improper wall mounting that result in accident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries e The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating e Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV EN 3 Risk of damage to the TV e Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Risk of injury fire or power cord damage e Never place the TV or any objects on the power cord e To easily disconnect the TV power cord from the power outlet ensure that you have full a
32. p gt TV settings gt EasyLink Auto Device OFF 4 36 Switch on or off EasyLink 3 Select On or Off then press OK When you play an HDMI CEC compliant device the TV switches on from standby and switches to the correct source If you do not intend to use Philips EasyLink switch it off 1 Press A 2 Select Setup gt TV settings gt EasyLink gt EasyLink 3 Select On or Off then pressOK e If EasyLink is OFF all its submenus are Note unavailable EN 19 4 38 Switch the device ON in sync 4 40 Search the connected devices h TV Search the HDMI CEC compliant devices connected to your TV and list them using Device list wit When an HDMI CEC compliant device is connected and it is switched On then the TV gets turned ON automatically Picture Easylink Sound Auto Device Off Dynamic TV On EasyLink 3D Device Control Keys Preferences Device Search Factory Settings Device List Reinstall TV Press ft Select Setup gt TV settings gt EasyLink gt Dynamic TV ON 3 Select On or Off then pressOK 4 39 Control the device using TV remote keys Now use a single remote to control your CEC enabled device The play and pause buttons of remote can be used to control device Picture Easylink Sound Auto Device Off EasyLink Dynamic TV On 3D Device Control Keys Preferences Device Search Factory Settings Device List Reinstall TV Pres
33. s f Select Setup gt TV settings gt EasyLink Device Control Keys 3 Select On or Off then press OK 20 EN Searching for Devices Please wait Devices Found Total Progress Press A Select Setup gt TV settings gt EasyLink gt Device Search Select On or Off then pressOK 4 41 Use the Options menu Clock Status Ecology Device Menu Visit options relevant to current action or selection 1 While a CEC enabled device is connected press OPTIONS The TV options menu appears 2 Select Device Menu then press OK Device List Display the list of added devices Home Display the home page of added device Device ON OFF Switch the added device ON OFF Next Go to Next Chapter Program of Disc Previous Go to Previous Chapter Program of Disc Play Pause Play or Pause the Program Fast Forward Fast Rewind Forward or Reverse the Program 5 3D Feature Picture 3D Mode Sound 3D Input Format On Easylink 3D Swap Auto 2D to 3D 3D Preferences Factory Settings Reinstall TV Press A Select Setup TV settings 3D then pressOK Select one of the following settings then press OK 3D Mode Switch On Off or Convert 2D content into 3D Off Turn Off the 3D mode On Turn On the 3D mode Auto 2D to 3D Select this mode to convert 2D video programs into 3D
34. solve your problem refer to the FAQs for this product at www philips com support or contact Customer Service Centre A Warning Do not attempt to repair the product yourself This may cause severe injury irreparable damage to your product or void your warranty Note Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 9 Product information Product information is subject to change without notice For detailed product information go to www philips com support 9 1 Supported display resolutions Computer formats VGA e Resolution refresh rate e 640 x 480 60Hz 72Hz 75Hz e 800 x 600 56Hz 60Hz 72Hz 75Hz e 1280 x 1024 60Hz e 1600 x 1200 60Hz Video formats YPbPr e Resolution refresh rate e 480i 60Hz e 480p 60Hz e 576i 50Hz e 576p 50Hz e 720p 50Hz 60Hz e 10801 50Hz 60Hz Computer formats HDMI e Resolution refresh rate e 480i 60Hz 480p 60Hz e 576i 50Hz e 576p 50Hz e 720p 60Hz e 1080 50Hz 60Hz e 1080p 50 Hz 60Hz 9 2 Tuner Reception Transmission e Antenna input 75ohm coaxial IEC75 e V system PAL B G e Video playback NTSC SECAM PAL e Tuner Bands UHF VHF 9 3 Remote control e Type YKF305 003 e Batteries 2 x AAA LRO3 type 9 4 Power e Mains power 110 240V 50Hz 60Hz e Ambient temperature 5 to 40 degrees
35. through an Authorised Service Center for of faulty or defective material or workman warranty service However if the ship for a period of 12 months from the Purchaser has to shift his residence to date of purchase another town on account of transfer or other reasons the warranty benefit will be Should a defect develop in this set during available at the Authorised Service Center the period of warranty PE Electronics of that town Limited undertakes to get the set repaired free of charge either The warranty is not valid in case of any of the following events The TV set is not used according to instructions given in the Direction for use User Manual Defects are caused by improper or reckless use Any repair work carried out by persons other than a Philips dealer or Authorised Service Center Any modification or alteration of any nature made in the electrical circuitry of the set This Warranty Card is not completed and signed immediately on delivery of the set by the Philips Dealer Fading effects and or Ghosts Multiple Image in picture if any arising due to location signal reception Defects due to causes beyond control like lightning abnormal voltage Acts of God or while in transit to purchaser s residence Refer Consumer Guidelines for further details PHILIPS EN 231 PHILIPS Be responsible Respect copyrights Specifications are subject to change without notice PHILIPS and the
Download Pdf Manuals
Related Search