Chief SLB302 project mount
Contents
1. over tighten screws when installing interface brackets NOTE Step 1 is only required when installing an SLB SSB interface bracket If an SLM SSM bracket is being installed proceed to step 2 1 Screw thumb screws onto 10 24 x 5 8 Phillips pan head screws DO NOT fully tighten thumb screws at this time 2 Turn projector upside down on a flat surface 3 Place the interface bracket onto the bottom of the projector aligning the mounting holes in the bracket with the threaded inserts in the bottom of the projector and ensuring that triangle in bracket points towards front of projector Position M6 x 12mm mounting screws with M6 flat washers into the threaded inserts and bracket side tabs Tighten all fasteners at this time securing the bracket to the projector 4 NOTE Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the All Points Security Kit aw Chief is a registered trademark of Milestone AV Technologies All rights reserved Q hs lt CONSUMER Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contain2. INSTALLATION INSTRUCTIONS SSB 302 SSM 302 SLB 302 and SLM 302 Interface Brackets SSB 302 SSM 302 SLB 302 and SLM 302 Interface Brackets are designed for use with Chief Series Projector Mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 5 Screw Phillips Pan Head Machine M6 x 12mm 4 10 24 Thumb Nuts 5 Washer M6 1 All Points Security Kit 1 5 32 Security Hex Key Towards front of projector of projector SLB 302 SLM 302 Note SSB style interface bracket connections are circled Note SSM style interface bracket connections are circled Only used when installing SLB SSB interface brackets NOTE Specific to SSB style and SSM style interface bracket installation All appropriate screws come pre installed in the circled locations above DO NOT attempt to substitute and USE ONLY this pre installed hardware for SSB style and SSM style interface bracket installation Installation Instructions WARNING OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT
3. ed in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document AN Chief Manufacturing a products division of Milestone AV Technologies 8800 002200 Rev00 iC C ae l f 6436 City West Parkway Eden Prairie MN 55344 2012 Milestone AV Technologies e P 800 582 6480 952 225 6000 F 877 894 6918 952 894 6918 a Duchossois Group Company Our Mounts Your Vision 06 12
Download Pdf Manuals
Related Search