Netgear VueZone
Contents
1. 2 Click the applicable link or button 3 Fill in the fields 4 Click Change to save your preferences Cameras This screen allows you to rename your cameras check your connection battery life and whether the camera is being shared or is inverted positioned upside down You can also adjust your settings for unattended recordings recording format motion detection and schedule a recording gt To rename your cameras 1 Click the Settings tab Settings Tab 30 VueZone System 2 Inthe left pane click a camera name a Full Connected de Shared No l Invert Image Settings for Unattended Recording 2 Format Y Schedule a Recording 3 Type the new camera name in the field The name is saved automatically When you click another tab or link the name change is shown Recording Format You can control the settings of video that is recorded as a result of motion detected or from a scheduled recording gt To adjust your auto record settings 1 Click the Format link 2 Select the resolution setting on the left side the higher the number the better the picture quality but the slower the frame rate the speed at which the video frames are streamed 3 Select the exposure appropriate for your video 4 Click Save Settings Tab 31 VueZone System Motion Detection To adjust your motion detection settings you must first enable motion detection using the radio buttons gt To adjus2. Playroom Sharing 2 Type the new camera name in the field The name is saved automatically When you click another tab or link the name change is shown Quick Tour of my VueZone com 16 Cameras Tab This chapter covers the following topics Cameras Tab Views Record Video Take a Snapshot Zoom Adjust Brightness Level Motion Detection Cameras 17 VueZone System Cameras Tab Views This is where you watch video from your cameras There are two views you can use e 320 grid view which shows all of your cameras at a smaller size 320 x 240 e 640 view shows one camera at a large size 640 x 480 To select the camera to view click one of your cameras listed on the left side of the screen Figure 7 Select a camera to view You can also schedule recordings share with friends expand the video to full screen record video take a snapshot and adjust brightness levels Tip In the 320 grid view you can rearrange your cameras by clicking and dragging a camera to its new location gt To view video from a camera 1 Click lf on the camera control bar to start viewing 2 f you do not see the control bar mouse over the video player and it pops up i Kitchen Cameras Tab 18 VueZone System 3 If you have more than one camera you can play all of them at once by clicking the Play All button below the tabs Library Settings Play All The button name changes to Stop All To stop playin
3. VueZone System User Manual VueZone System Support Thank you for choosing NETGEAR After installing your device locate the serial number on the label of your product You will need to reference this serial number if you contact support For product updates and web support visit http support netgear com Phone US amp Canada only 1 888 NETGEAR Phone Other Countries Check the list of phone numbers at http support netgear com general contact default aspx NETGEAR recommends that you use only the official NETGEAR support resources Trademarks NETGEAR the NETGEAR logo and Connect with Innovation are trademarks and or registered trademarks of NETGEAR Inc and or its subsidiaries in the United States and or other countries Information is subject to change without notice NETGEAR Inc All rights reserved Contents Chapter 1 Getting Started Vuezo ne NOOO rias ir RE d ww dI dae 6 Package Contents o o oooooo lees 7 DASE ASI 8 EA A 8 Set Up Your VueZone SysteM o oooooononornoonnonono 9 Connect the Base Station suche kc RE 0E a e 9 Install Camera Batteries llle 10 Sync Cameras to the Base Stati0M o oo oooooooooooo 11 Install the Cameras RR 12 ee AAA 12 Chapter 2 Quick Tour of my VueZone com Vuezone laDS AA ERE 3521 294 0 94 19 29 4538 14 AAA 14 A Gage EEE TEE EEE EEEE E E EEEE E EE E d icd qt dci E CE 14 o 664 44 Sa
4. Sync Cameras to the Base Station Syncing the cameras establishes communication between the cameras and the base station To sync cameras to the base station 1 On the base station make sure that the Internet LED on front is flashing The flashing Internet LED shows communication with the Internet If the LED does not flash visit htto support netgear com to troubleshoot or contact VueZone support Place the camera within 12 inches 30 5 cm of the base station Press and release the Sync button on the top of the base station The blue Sync LED on the base station lights for 45 seconds During this time slide the camera On Off switch to the on position green dot showing The Sync LED on the front of the camera flashes for 5 seconds to confirm sync If the camera Sync LED did not flash within 45 seconds power off the camera and try Steps 3 and 4 again Once synced the camera can be viewed and positioned Tip For a motion detection camera each time the power is turned on it takes 2 minutes for its motion sensor to warm up and begin operating To register your base station A c N Locate your VGN number on the base station label Follow the quick install guide instructions Visit http vuezone convregister to register Follow the onscreen instructions Getting Started 11 VueZone System Install the Cameras Use the magnetic mounts provided in the package to install your cameras gt To install a came
5. Customer f eedb To view your recording or snapshot Click the recording or snapshot To close the player click the X in the upper right corner Download a Recording or Snapshot to Your Computer To download a video or snapshot to your computer 1 Select the content that you want Select the check boxes for the content You can also click All to select all recordings or snapshots currently displayed on the screen To deselect everything click None View Hy Mame Camera Date Type Select All None 2 To download the selected content click the Download button below the tabs Library ure Lock Uniotk Doerndoesed 1123131415 H The clips and snapshots you selected are added to a zipped folder for you to download to your computer Library Tab 25 VueZone System Lock or Unlock a Recording or Snapshot Your account has a storage limit which varies depending on your subscription level When you reach your limit your oldest files are deleted automatically Locked files are not deleted Cameras Library Delete Share Lock Uniotk Dremi 112131415 gt H gt To lock a file 1 Select the check box for the recording or snapshot 2 Click Lock 3 Your content is protected from automatic deletion gt To unlock a file 1 Select the check box for the recording or snapshot again 2 Click Unlock Share a Video or Snapshot Using Email If you have a snapshot or video you want to share
6. Daso Se PDF RS SER OR ode eee eed e P dd des 35 Software UUGGISS oscars bn Gd 9 RRA 35 My Account Services llle 36 Sa e ard a dos OR dard dde quos AO 478 3 9 1t dio xi ges doa iced 36 Appendix A Notification of Compliance Getting Started This chapter covers the following topics e VueZone Network e Set Up Your VueZone System e Install the Cameras e Start Viewing For more information about the topics covered in this manual visit the Support website at htto support netgear com Firmware updates with new features and bug fixes are made available from time to time Some products can regularly check for updates for download and install of new firmware or you can initiate a firmware download and install manually If the features or behavior of your product do not match what is described in this guide you might need to update your firmware VueZone System VueZone Network The base station connects to your network and uses the Internet connection to stream video to your private VueZone account You can use your smartphone or a computer to visit your VueZone account to access your video During video streaming several outbound ports are used ports 20000 20003 when viewing from a browser If your firewall blocks these outbound ports you might need to adjust the firewall settings for the network you are using to access the Internet for viewing 4 RU m 1 p 3 4 Wes PY Figure 1 VueZone system communic
7. Eesti Estonian English Espa ol Spanish EAAnVIKN Greek Francais French Italiano Italian Latviski Latvian Lietuviy Lithuanian Nederlands Dutch Malti Maltese Magyar Hungarian Polski Polish Portugu s Portuguese Slovensko Slovenian VueZone System Hiermit erklart NETGEAR Inc dass sich das Gerat Radiolan in Ubereinstimmung mit den grundlegenden Anforderungen und den ubrigen einschlagigen Bestimmungen der Richtlinie 1999 5 EG befindet K esolevaga kinnitab NETGEAR Inc seadme Radiolan vastavust direktiivi 1999 5 EU p hinduetele ja nimetatud direktiivist tulenevatele teistele asjakohastele s tetele Hereby NETGEAR Inc declares that this Radiolan is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Por medio de la presente NETGEAR Inc declara que el Radiolan cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE ME THN NAPOY2A NETGEAR Inc AHAONEI OTI Radiolan 2YMMOP ONETAI MPO TI OY2I0AEl2 ATIAITHZEI2Z KAI TIZ AOINE2 2XETIKE2 AIATA El2 TH OAHTIA2 1999 5 EK Par la pr sente NETGEAR Inc d clare que l appareil Radiolan est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Con la presente NETGEAR Inc dichiara che questo Radiolan conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
8. Your friends receive an email prompting them to create a free account to see your cameras Once your friends register and sign in they can see a Cameras tab and Settings tab just like you The difference is they can only view video they cannot record change settings or take snapshots Their Settings tab contains their registration information only Tip Be sure to give your friends permission to view all the cameras that you want them to see If your friends already had my VueZone com accounts the contact information that they used to register is shown in your friend list gt To remove a friend s permission to view a specific camera Clear the check boxes of the cameras you do not want the friend to view Your changes are saved automatically Tip Your friends can view your cameras until you remove their permissions Settings Tab 34 VueZone System gt To remove a friend completely 1 Click the friend s name to highlight it 2 Click Remove Your friend is deleted Base Stations On the Settings tab you can view information about your base stations and their connections You can change the name of your base station The default base station name is set at the factory but you can change it to be more personal Your base station name is what your friends see if you share your camera You can rename all of your base stations gt To rename your base station 1 On the Settings tab select Base Stations Co
9. Zoom Level 1x 2x 4x Save Zoom Level 1x 2x 4x Cancel 2 Select the zoom level The 640 view allows for up to 2x view The 320 view allows for up to 4x view 3 Click the box and drag it to move the zoom area 4 Click Save The image refreshes to show the zoomed in area gt To remove the zoom 1 While streaming video click the CO Zoom icon again 2 Change the zoom level to 1x 3 Click Save Expand Video to Full Screen If you want to watch one camera full screen click the Full Screen icon To exit the full screen press Escape Cameras Tab 22 VueZone System Adjust Brightness Level The cameras use the normal image setting unless you change the setting to compensate for bright light or low light environments Friends cannot change the brightness level TE c Bright light Reduces exposure for bright light or outdoor settings i ej 4 e z0 Normal image This is the default brightness control C Low light Increases exposure for lower light settings gt To adjust the brightness level Select the brightness level that you want The brightness level is automatically saved and remains in effect unless you change it again Motion Detection Cameras For motion detection cameras a motion detector icon is shown to the left of the signal strength battery power indicator and delete icons Touse the motion detector icon To turn on and off the motion detector click the arrow to the right of the E
10. stabilite dalla direttiva 1999 5 CE Ar So NETGEAR Inc deklar ka Radiolan atbilst Direkt vas 1999 5 EK b tiskaj m prasibam un citiem ar to saistitajiem noteikumiem Siuo NETGEAR Inc deklaruoja kad Sis Radiolan atitinka esminius reikalavimus ir kitas 1999 5 EB Direktyvos nuostatas Hierbij verklaart NETGEAR Inc dat het toestel Radiolan in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG Hawnhekk NETGEAR Inc jiddikjara li dan Radiolan jikkonforma mal htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid Dirrettiva 1999 5 EC Alulirott NETGEAR Inc nyilatkozom hogy a Radiolan megfelel a vonatkoz alapvet kovetelm nyeknek s az 1999 5 EC ir nyelv egy b el r sainak Niniejezym NETGEAR Inc o wiadcza ze Radiolan jest zgodny z zasadniczymi wymogami oraz pozostatymi stosownymi postanowieniami Dyrektywy 1999 5 EC NETGEAR Inc declara que este Radiolan est conforme com os requisitos essenciais e outras disposi es da Directiva 1999 5 CE NETGEAR Inc izjavlja da je ta Radiolan v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolocili direktive 1999 5 ES Notification of Compliance 38 VueZone System Slovensky NETGEAR Inc t mto vyhlasuje Ze Radiolan spi a z kladn po iadavky a v etky Slovak prisluSn ustanovenia Smernice 1999 5 ES Suomi Finnish NETGEAR Inc vakuuttaa t ten ett Radiolan tyyppinen laite on direkti
11. you can send it using email 1 Select the check box for the recordings or snapshots you want to share You can select more than one 2 Click the Share button to get the drop down menu 3 Select Email Delete Share v Lock Unlock Download Email g _ Upload Library Tab 26 VueZone System 4 Enter the email addresses and a message to your recipients To send to more than one email address use a semi colon between the addresses D I C Pr M n K r Rrr X ea S A Share via email no reply vuezone com jane smith I d like to share my photos clips with you I hope you enjoy them Sharing 1 image s and 0 video s 5 Click Send To cancel click the X in the upper right corner When your friends receive the email they can click a link to a page to see what you sent them From here they can click the video or snapshot which enlarges for easy viewing Upload a Video to YouTube or a Snapshot to Flickr gt To share content using YouTube videos or Flickr snapshots you need to have an account with the service To share your videos and snapshots with your social media network 1 Select the check box for each recording or snapshot that you want to share You can select more than one Click the Share button to display the drop down menu Select Upload Select the appropriate service and sign in oF GW N Follow the instructions f
12. your camera and signed in to http my vuezone com you can personalize the name on your VueZone base station and camera Name Your VueZone Base Station Your default VueZone base station name is the VGN You might want to give it a more personal name This name is what your friends see if you share your camera Torename the base station 1 Click the Settings tab 2 Click Base stations in the left column 3 Type the new name in the box it is saved automatically Name Your Camera Your camera has a name based on its serial number You might find it helpful to change this name to something that reflects the camera s positioning for instance living room baby s room back door Naming your cameras makes it easier to view manage and share video since anyone you share video with sees the camera names Quick Tour of my VueZone com 15 VueZone System gt To rename a camera from the Camera tab 1 Double click the camera name 2 Type a new name Camera names are limited to 13 characters no spaces 3 Click outside the field The new name is saved automatically Torename a camera from the Settings tab 1 On the Settings tab click a camera name in the Cameras section in the left column Cameras S w d Ma Full Backyard i ou gt Connected Entry i Family Room AL Shared No View Li Invert Image Nomai Olnvert i Settings for Unattended Recording o d Formal 9 Schedule a Recording Krchen Fam
13. 003 du Canada Regulatory Compliance Information Note This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices Failure of the end user to comply with the applicable requirements may result in unlawful operation and adverse action against the end user by the applicable National regulatory authority Note This product s firmware limits operation to only the channels allowed in a particular Region or Country Therefore all options described in this user s guide may not be available in your version of the product Europe EU Declaration of Conformity CEO Marking by the above symbol indicates compliance with the Essential Requirements of the R amp TTE Directive of the European Union 1999 5 EC This equipment meets the following conformance standards EN300 328 2 4Ghz EN301 489 17 EN60950 1 For complete DoC visit the NETGEAR EU Declarations of Conformity website at http support netgear convapp answers detail a_id 11621 EDOC in Languages of the European Community Language Cesky Czech NETGEAR Inc timto prohlaSuje Ze tento Radiolan je ve shode se zakladnimi po adavky a dal mi pr slu n mi ustanoven mi smernice 1999 5 ES Dansk Danish Undertegnede NETGEAR Inc erkl rer herved at f lgende udstyr Radiolan overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF 37 Deutsch German
14. Motion Sensor icon Family Room ul Motlon Detection ZEE E The motion sensor icon is green when the motion detector is on and it is gray when the motion detector is off Cameras Tab 23 Library Tab You can use the Library tab to manage and watch video clips and review snapshots This chapter covers the following topics View Your Recordings and Snapshots Download a Recording or Snapshot to Your Computer Lock or Unlock a Recording or Snapshot Share a Video or Snapshot Using Email Upload a Video to YouTube or a Snapshot to Flickr 24 VueZone System View Your Recordings and Snapshots On the Library tab you can sort snapshots and recordings by name camera date or type by making a selection in the View By section above the recordings NETGEAR ve vue Premier Cameras Library Settings 100608 1638 0 11 1005081557 0 12 100508 1520 0 12 1005081437 011 1005080169 011 1005072811 012 1005072655 0 11 1095061055 011 Kitchen 0 4MB Kitchen 10 348 Kitchen 0 348 Kitchen 0 3MB Kitchen 0 4MB Kitchen 0 3MB Kitehen 0 3446 Kitchen 0 IMSG 5 Od 2012 08 16 38 0 Od 2012 08 16 57 05 Od 2012 08 16 20 05 Od 2012 08 14 37 05 Oct 2012 08 01 49 05 Oct 201207 28 1 4 Oct 2012 OF 26 88 05 Oct 2012 00 10 88 1005060838 on 1004211842 on 1004211128 0 12 1004185532 011 1004185439 011 1004172637 0 11 1004172521 0 11 1004170413 0 12 ght 6 2012 N ack Vuelone Store AboutUs Privacy Policy Terms amp Conditions corte Us
15. ary and Settings This is where you control everything for your VueZone personal video network When you log in the Camera tab displays V vue Promier Figure 6 Camera tab Camera View the video stream from all of your cameras Start and stop recordings Take a snapshot Zoom in to the video up to 4x Expand the video to full screen time lapse mode Adjust video brightness levels Arm and disarm your motion detection cameras Library Manage all of your video recordings and snapshots Download a recording or snapshot to your computer View snapshots and recordings by name camera date or type Lock or unlock a recording or snapshot Share a recording or snapshot by email Upload a snapshot or recording to Flickr or YouTube Quick Tour of my VueZone com 14 VueZone System Settings e View your current account information e Change your password e Set up motion activated alerts e Adjust the sensitivity of your motion activated camera e Schedule recordings e Adjust your auto record settings e Add or delete friends who can view your cameras e Manage which cameras your friends can see e Manage your recording schedule e Change your camera and VueZone base station names e View how much storage space you have remaining e View your VueZone base station and connection information e Share live video from a camera with your friends Personalize Your VueZone System After you have installed
16. ase Station The base station needs to be connected to a network with an Internet connection gt To connect the base station to your network 1 Connect the Ethernet cable to the Ethernet port on the base station and a LAN port on your router Figure 5 Connect the base station to your router and plug in the base station 2 Connect the power adapter to the base station and power outlet The blue Power LED lights e The blue Internet LED flashes if the base station can connect to the Internet It might take up to 2 minutes before this LED starts flashing Tip For help with troubleshooting visit Atip support netgear com for answers and links to VueZone support Getting Started 9 VueZone System Install Camera Batteries Depending on the camera model you need to install either one or two batteries The camera batteries are provided in the package gt To install camera batteries 1 Slide the battery latch toward the camera back and press down on the bottom of the door to remove it 2 Insert the battery with then negative end first Be sure to follow the polarity indication on the sticker inside the camera 3 Snap the battery door back in place by inserting the top portion of the door first and clicking the bottom portion into place Tip Wait until you close the battery door before you turn on the camera power for syncing with the VueZone base station Getting Started 10 gt VueZone System
17. ation Getting Started 6 VueZone System Package Contents Your VueZone personal video network includes the following oO camera mounts 4 pr Zz 4 Installation guide Cameras 2 c VT E Z r Base Station y Wall mounting di screws and anchors Note Some VueZone networks do not include the camera shell and it s associated parts Screwdriver Camera Screws Shell mounting arm shell for shell Figure 2 Package contents WARNING Choking hazard with small parts Keep out of reach of young children Getting Started 7 VueZone System Base Station The base station connects to your network and wirelessly communicates with the VueZone cameras Camera Sync butto Sync LED Reset J qp Power connector Ambsr LED Power LED b 4 Ethernet Internet LED Status LED Figure 3 Base station front view Camera The VueZone cameras send video to the base station You have to install the base station first before you install the cameras Battery door mount On Off switch dim Lr C Battery door latch Sync LED Lens Camera bottom Figure 4 Some camera models look different than the camera shown Getting Started 8 VueZone System Set Up Your VueZone System Your network must be connect to the Internet before you install the VueZone base station Follow the steps in this section in the order in which they are presented Connect the B
18. captured e Streaming video captures the entire time of scheduled recording e Time lapse captures frames every 1 minute e Slow time lapse captures frames once every 5 minutes Time lapses are good if you want to save storage space or you do not want to watch the full video Your recordings can be found on the Library tab Tip The lock icon indicates whether the recorded video is locked or unlocked You can change this status after the recording has happened on the Library tab gt To edit a recording schedule 1 Click Schedule a Recording 2 Change the item you would like to edit 3 Click Save gt To delete a recording schedule 1 Click Schedule a Recording 2 Click Remove and follow the prompts Tip With VueZone Premier or Elite service plans you get a video motion alert email VueZone Basic users receive an email alert that includes a snapshot In either case if you do not see the email alert be sure to check your spam folder Settings Tab 33 VueZone System Sharing Sharing is where you manage who can see your cameras and which cameras they have permission to view This is free and easy for your friends All they have to do is register gt To add a friend 1 On the Settings tab click Add a Friend Add a Friend 2 Enter the name email address and if you have more than one camera which ones your friend is allowed to view You can share all of your cameras or any number of them 3 Click Save
19. e components and is to be used with approved antennas only Any product changes or modifications will invalidate all applicable regulatory certifications and approvals FCC Guidelines for Human Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter FCC Declaration of Conformity We NETGEAR Inc 350 East Plumeria Drive San Jose CA 95134 declare under our sole responsibility that the VueZone System complies with Part 15 Subpart B of FCC CFR47 Rules Operation is subject to the following two conditions e This device may not cause harmful interference and e This device must accept any interference received including interference that may cause undesired operation FCC Radio Frequency Interference Warnings amp Instructions This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there
20. g video from all the cameras click Stop All Icons Your cameras show icons and a drop down menu If you have a VueZone motion detection camera an additional icon displays The following table describes the icons Table 1 Icons kon Description 0 Base Station This icon represents the base stations associated with your account Signal Strength Indicates signal strength of the camera relative to the base station T um e Battery Power MER Motion Sensor The motion sensor icon displays only if your camera has a motion t i sensor A A Green indicates that the motion sensor is on The icon is gray when the motion sensor is off A red slash indicates that motion sensing is disabled This icon turns red when motion sensing has been triggered Cameras Tab 19 VueZone System Control Bar Buttons There are six controls on the tool bar start stop streaming record video take a snapshot zoom adjust brightness and full screen time lapse mode Control bar Figure 8 Cameras tab control bar The following table describes the control bar buttons Table 2 Control Bar Buttons Button Description Starts and stops video stream or stops recording if it is recording Record Starts and stops recording video clips The border around the video e u turns red when recording is in progress You can also see the time lapse in the top right corner Snapshot Takes still images Allows you to zoom into the video by u
21. ht be updated but not all of your cameras are If that happens you are shown which cameras still need to be updated Tip Cameras cannot be updated if they are out of power or out of range Additionally a camera might not have the most recent updates if it was purchased separately My Account Services The Account Services screen shows what service level and features you have and when your service expires Preferences This section notifies you of your opt in status for the VueZone newsletter and whether you prefer to use Tooltips on myVueZone com Settings Tab 36 Notification of Compliance NETGEAR Wireless Routers Gateways APs This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio exempts de licence L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB
22. is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following methods e Reorient or relocate the receiving antenna Notification of Compliance 39 VueZone System e Increase the separation between the equipment and the receiver e Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution e Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment e This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation e For product available in the USA market only channel 1 11 can be operated Selection of other channels is not possible e This device and its antenna s must not be co located or operation in conjunction with any other antenna or transmitter Canadian Department of Communications Radio Interference Regulations This digital apparatus VueZ
23. ivin 1999 5 EY oleellisten vaatimusten ja sita koskevien direktiivin muiden ehtojen mukainen Svenska H rmed intygar NETGEAR Inc att denna Radiolan star verensst mmelse med de Swedish vasentliga egenskapskrav och vriga relevanta bestammelser som framg r av direktiv 1999 5 EG slenska H r me l sir NETGEAR Inc yfir v ad Radiolan er samr mi vi grunnkr fur og a rar Icelandic krofur sem ger ar eru tilskipun 1999 5 EC Norsk NETGEAR Inc erklaerer herved at utstyret Hadiolan er i samsvar med de grunnleggende Norwegian krav og vrige relevante krav i direktiv 1999 5 EF This device is a 2 4 GHz wideband transmission system transceiver intended for use in all EU member states and EF TA countries except in France and Italy where restrictive use applies In Italy the end user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and or for supplying public access to telecommunications and or network services This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483 5 MHz For detailed information the end user should contact the national spectrum authority in France FCC Requirements for Operation in the United States FCC Information to User This product does not contain any user serviceabl
24. n contr l Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps Interference Reduction Table The table below shows the Recommended Minimum Distance between NETGEAR equipment and household appliances to reduce interference in feet and meters Household Appliance Recommended Minimum Distance b LLL Wnfeetand meer feet and meters Baby Monitor Analog 20 feet 6 meters Notification of Compliance 40 VueZone System Household Appliance Recommended Minimum Distance in feet and meters Baby Monitor Digital 40 feet 12 meters Cordless phone Analog 20 feet 6 meters Cordless phone Digital 30 feet 9 meters Bluetooth devices 20 feet 6 meters ZigBee 20 feet 6 meters Notification of Compliance 41
25. nd E A E EEEE dei capa dU E T ERN 15 Personalize Your VueZone System 2 00 cee ee 15 Name Your VueZone Base Station ooooooo ooo 15 Name Your Camera uuu uae acere be ees de GENS AAA OEE ESS 15 Chapter 3 Cameras Tab Cameras Tab VIEWS cusa rase ars do edo HOES ded SERO COS RO Ew 18 ISO a SES RNG SESS ASAE ER ar dS ed 19 Control Bar BUHONS crac 4068404645044 Gad be ae ORC CR 404445 20 Record VideO o2 49 duda efan ENERE PR AAi be ens 21 THE B DOSIS EE E E E ra 21 A 22 Expand Video to Full Screen nananana anaa aaa 22 Adjust Brightness Level os 64036405 FREE EROS V 080 4045 diri 23 Motion Detection Cameras lese 23 Chapter 4 Library Tab View Your Recordings and ShnapshotS o o ooooooomooo 25 Download a Recording or Snapshot to Your Computer 25 Lock or Unlock a Recording or Snapshot 0 0 000 eae 26 Share a Video or Snapshot Using Email 26 Upload a Video to YouTube or a Snapshot to Flickr 27 VueZone System MO or LOEELIBDIBN arrasada ii da A 28 Chapter 5 Settings Tab PSR IS La 4 gd EATUR dE UH Eq rd a da d rad ed ARCA GC Ord 30 GOUTTES osea anana ana anaa aeq ox edo a ERROR eed beset 30 HEC EDIDI a aca qupd 3 49 3 2626273 8 R78 dt eed LP odo A cw deeds ee wa 31 MODOD DIST uuu ak a3 9 do dod RUE OE nida ide dia 480488 32 Schedule a Recording rad dang woes pr dE d 9 9 a de ques 32 zl cd AA 34
26. nnected VGN 12345678AB Firmware Version 02 01 00 04 Local Gateway IP 10 1 1 2 Mac ID AB C1 23 45 67 89 Current Status Connected Last Connected Dec 05 2011 18 27 37 Gateway Date Dec 05 2011 18 36 28 Connected Software up to Date Upload Speed Test 3 2 Type the new name in the Base Station Name field it is saved automatically Tip VueZone Elite service supports up to three base stations on the account Software Updates Periodically software updates are available When updates are available you are notified after logging in Update Maintenance We recommend that you install the latest software Do you wish to install it now Yes No ask again next time Yes No Figure 9 System update message Settings Tab 35 VueZone System If you choose to cancel the update you can update when you are ready by clicking Base Station on the Settings tab To update the software 1 Make sure that your base station is on and your camera s battery life indicator shows two yellow or green bars 2 Click the System Software Update Available link 3 When prompted click Start Update During the update messages appear notifying you of your progress When the update is complete you are notified to log out and then sign back in for the changes to take effect There might be instances when you cannot update If this happens you are prompted to take corrective action In some cases your system mig
27. one System does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Industry Canada This device complies with RSS 210 of the Industry Canada Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation IMPORTANT NOTE Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body Caution Ce dispositif est conforme la norme CNR 210 d Industrie Canada applicable aux appareils radio exempts de licence Son fonctionnement est sujet aux deux conditions suivantes 1 le dispositif ne doit pas produire de brouillage pr judiciable et 2 ce dispositif doit accepter tout brouillage recu y compris un brouillage susceptible de provoquer un fonctionnement ind sirable NOTE IMPORTANTE D claration d exposition aux radiations Cet quipement est conforme aux limites d exposition aux rayonnements IC tablies pour un environnement no
28. or the service you selected To delete a video or snapshot If a file is locked before you can delete it you have to go to the Library tab and unlock it 1 Select the check box for the video or snapshot that you want deleted 2 Click the Delete button Library Tab 27 VueZone System You are asked to confirm that you want to delete the selected items 3 Click Delete to complete the action Tip You can store up to 500 MB of files depending on the VueZone service plan that you have To ensure that you have sufficient space periodically save files to your computer Grid or List Display You can view your stored videos and snapshots as a grid or as a list Switch between the two using the icons at the top of the screen NETGEAR e vue Premier View By Name Camera Date Type Library Tab 28 Settings Tab This chapter covers the following topics Personal Settings Cameras Recording Format Schedule a Recording Sharing Base Stations Software Updates 29 VueZone System Personal Settings This is where you can view your current account information change your user name used to log in to your account password and your contact information including email address and physical address gt To change the user name password or email 1 On the Settings tab select Personal Settings Personal Settings Identification First Narre Last Narre Change Password Service Address
29. p to 4x and zoom back out There are three settings bright light normal and low light Full Screen Expands the video to your full computer screen Press Escape to exit this setting Cameras Tab 20 VueZone System Record Video You can start recording video or you can schedule it see Schedule a Recording on page 32 gt To start recording video 1 Click the Start Streaming icon to begin streaming live video 2 To start recording click the 133 Record icon The border around the video turns red when recording is in progress The time lapse is displayed in the top right corner 3 To stop recording click the icon again Live video continues to play on your screen 4 To stop streaming live video click the Stop Streaming icon Your recording is saved and can be viewed in the Library Take a Snapshot You can take a snapshot of a frame in the video stream gt To take a snapshot 1 Click the gt Start Streaming icon to begin streaming live video 2 Click the y Snapshot icon to take a picture Your photo is saved and can be seen in the Library Tip You can take a snapshot even if the live video is off by clicking the f Snapshot icon Cameras Tab 21 VueZone System Zoom You can zoom in on the video you see from the cameras gt To zoom 1 When streaming video click the Q Zoom icon in the control bar The zoom window opens with the option to zoom in by 1x 2x or 4x A We E
30. ra 1 Decide where you want to install the camera 2 If you want to stick the mount directly to a surface peel off the protective layer on the back of the mounting ball 3 Either stick the mount to the surface you selected or install the mounting screw included and hang the mounting ball from the screw head 4 Place the camera on the magnetic mount and aim it where you want video coverage 5 View the video through your hito my vuezone com account on your computer or smartphone You can adjust your camera position while viewing To use a smartphone you need to download and install an app Start Viewing After you sync your cameras and register as described in the previous sections you can view streaming video To view video from your cameras 1 Log in to http my vuezone com The cameras that have synced are shown on the Cameras tab Click lf on the camera control bar to start viewing If you do not see the control bar mouse over the video player and it pops up i Kitchen You can also use your smartphone to view your camera with VueZone Mobile for iPhone and Android VueZone Mobile requires a subscription to the VueZone Premier or Elite service plans Visit www vuezone com mobile for details Getting Started 12 Quick Tour of my VueZone com This chapter covers the following topics e VueZone Tabs e Personalize Your VueZone System 13 VueZone System VueZone Tabs VueZone com has three tabs Cameras Libr
31. t your motion detection settings 1 Click the Motion Detection link 2 Using the slider select the sensitivity The higher the number the more sensitive the motion detection sensor 3 Select whether you want video or a snapshot captured If you selected video in Step 3 select the length of recording 5 If you want to receive motion email alerts click yes and enter the email addresses to which you would like the alert sent 6 Customize the message that you would like to receive when an alert is sent 7 Click Save Schedule a Recording Here you can schedule recordings and see schedule times dates speed and the estimated size of the recording e Recordings must be scheduled at least 5 minutes in advance and are limited to 4 hours e When cameras are scheduled to record your system is unable to stream other cameras e You can have only one scheduled recording per camera per day The scheduled recordings cannot overlap gt To schedule a recording 1 On the Settings tab select the camera that you want to use 2 Click Schedule a Recording 6 438 4 ow 2 6 411394 pw 84 unt this once 4 12 05 2031 pg Schedule rros hyvo Deen upctstec to the currere time Rarow Cancel 3 Select the start and end times how often you want the recording to happen and the dates Settings Tab 32 VueZone System 4 Select how often you would like this recording to repeat 5 Select the rate that you want the video
Download Pdf Manuals
Related Search