Native Union CURVE BT iDOCK
Contents
1. of your computer or VOIP software AUTOMATIC RECONNECTION The MMO3i is designed to reconnect automatically to the last 2 connected devices in its memory If you take your mobile phone out of range of the MMO3i for more than 30 seconds without turning the MMO3i off and then come back into range the MMOS3i will search for your phone and reconnect automatically within 90 seconds If your phone is not one of the last two connected phones you may have to reconnect to the MMO3i using your mobile phone s Bluetooth menu Please note that the MMO3i will not reconnect automatically if you have manually disconnected your phone from the MMOSi using your phone s Bluetooth menu In this case you will need to use your phone s Bluetooth menu to reconnect By default certain mobile phones will prompt you to confirm whether you want to accept the connection or reconnection when back in range If your phone keeps prompting you about the connection to the MMOSi then you should change the security setting on your phone so that it considers the MMOSi as a trusted or authorized connection please check your phone s user manual Out of range Automatic Disconnection Back into range U Automatic Reconnection i e PAIRING AN ADDITIONAL DEVICE You only need to pair your phone with the MMO3i once Once you have paired your phone with the MMO3i they will reconnect to each other in future without you having to rep2. void the user s authority to operate the equipment The manufacturers are not responsible for any radio or TV interference caused by unauthorized modification or incorrect installation to this equipment FCC ID X83Q MMO03 FCC NOTICE USA As specified in Part 15 of the FCC Rules this equipment complies within the limits of a Class B digital device These restrictions provide sufficient protection against radio and TV interference in residential areas However even during normal operation this device may cause TV or radio interfer ence In attempting to eliminate some or all interference you should try one or more of the following corrective measures 1 Increase the distance between the device and the radio and or TV 2 Try a different outlet on various electrical circuits for the device the radio and or TV 3 Reposition the receiving antenna X Disposal of old electrical and electronic equipment After the implementation of the European Directive 2002 96 EU in the national legal system mm the following applies Electrical and electronic devices may not be disposed of with domestic waste Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale Details to this are defined by the national law of the respective country This symbol on the product the instruction manual or the package indicates that a product is
3. EXTERNAL SPEAKERS OR A STEREO VIA THE 3 5MM LINE OUT PORT Using the MMO3i base you can play music from your iPhone through external speakers or a stereo receiver You need an audio cable available separately with a standard 3 5 millimeter stereo plug many external speakers use this type of cable 1 Place your iPhone in the MMO3i base dock 2 Connect the speakers or stereo to the 3 5mm line out port 3 Use the iPhone controls to play music USE YOUR MMO03i WITH YOUR iPHONE OR ANY OTHER BLUETOOTH WIRELESS TECHNOLOGY MOBILE PHONE MAKING A CALL To make a call with your MMO3i simply dial the number on your mobile phone keypad as you normally would When the call connects you will now speak and listen through the last active call device whether it is the MMO3i or your mobile phone If you wish to swap the call between MMOSi and your mobile phone press and hold the volume control button for 2 seconds or alternatively select from your mobile phone interface setting ANSWERING AN INCOMING CALL To answer a call on your MMO3i simply pick up the handset from the base and the call will be connected on the MMO3i automatically If the handset is not on the base at the time of the call press the MFB button once to answer the call To answer the call directly on your mobile phone simply answer by using your mobile phone interface If you wish to swap the call between MMOSi and your mobile phone press an
4. MMOSi and enter 0000 if a password is required The MMO3i will make a sound and the blue LED will light on indicating the pairing process is now completed and the mobile phone is connected You will also see a white LED appearing on the back of the handset This LED is a visual indication to tell you that the MMO3i is now connected with your mobile phone Note Some phones will connect to the MMO3i automatically If your phone prompts you to confirm whether you want to connect to the MMO3i accept the connection request If your phone does not connect to the MMO3i then use your mobile phone s Bluetooth menu to initiate a connection manually If you have connected the MMO3i with an iPhone a MMO3i battery icon will appear on your phone s taskbar indicating the current battery level of the MMO3i handset You can use now your MMO3i ATTENTION The Bluetooth Wireless technology signal reception works up to a 10m range open area If your mobile phone moves out of range the MMO3i will be automatically disconnected The white LED on the handset will turn off to indicate disconnection CHARGING YOUR iPHONE Place your iPhone in the dedicated iPhone dock located on the MMO3i base Your iPhone will be charged in both power on and power off modes until it is fully charged To recharge your iPhone the AC adapter must be connected to the MMO3i base PLAYING MUSIC THROUGH
5. R MMO3i HANDSET ON To turn on your MMO3i you must press and hold the MFB button for 2 seconds When your MMO3i is on you will hear a sound and the blue LED will turn on STEP 3 TURN YOUR MMO3i HANDSET OFF To turn off your MMO3i you must press and hold the MFB button for 2 seconds When your MMO3i is off you will hear a sound and all LED will turn off STEP 4 PAIRING THE MMO3i HANDSET WITH YOUR iPHONE OR ANY BLUETOOTH WIRELESS TECHNOLOGY MOBILE PHONE First of all you must make sure that your mobile phone has Bluetooth Wireless capability If you are not sure whether it does please consult your mobile phone s user manual IMPORTANT Please note that your MMO3i must be powered off before starting the pairing process a To pair your MMO3i handset with your mobile phone you must press and hold the MFB button for 5 seconds until you hear a sound and see the red and blue LED flashing alternately Your MMO3i handset is now ready to be paired b Make sure the Bluetooth Wireless function is activated on your mobile phone and instruct your mobile phone to search for new Bluetooth devices check the user s instructions of your mobile phone if you need more information c Place your MMO3i handset within 1 meter away from your mobile phone d Your mobile phone should search for all Bluetooth devices and the name MM03i should appear on the Bluetooth device list e Select
6. ST NUMBER To redial the last number called on your MMO3i double press the MFB button END ACTIVE CALL AND ACCEPT WAITING CALL During a call to end the active call and accept the waiting incoming call on your MMO3i press the MFB button once HOLD ACTIVE CALL AND ACCEPT WAITING CALL During a call to hold your active call and accept the waiting incoming call on your MMOSi double press the MFB button Please do the same again if you want to switch between the two calls VOICE ACTIVATED DIALING Your MMO3i also support voice activated dialing with certain models of mobile phones Before you use this function you need to set up voice tags on your mobile phone To find out how to do this please refer to the instruction manual of your mobile phone To make a voice activated call press and hold the volume control button for 2 seconds When you hear an alert tone say the voice tag of the contact If your mobile phone has trouble recognizing the voice tag please repeat the process again MUTE During a call press volume control and buttons together to mute the microphone Press again to unmute CLEAR PAIRED DEVICE LIST To clear the list of all paired devices you will need to perform Factory Reset To do so switch off the MMO3i place it on the charging base then press and hold MFB button for 5 seconds while in charging state until you hear an alert tone CHOOSE YOUR MM03i RINGTONE You can define
7. WELCOME Thank you for buying the MMOSi handset you will love this new experience For the most updated information be sure to check our website at www nativeunion com WHAT YOU GET IN THIS PACKAGE 1 MMOSi Bluetooth wireless handset 2 MMOSi base 3 One Multi country AC adaptor with wire and micro USB with 4 exchangeable adaptor plugs for Europe UK North America Asia and Australia Micro USB USB Cable Instruction Manual Two universal dock adaptors for iPhone 3GS and iPhone 4 oak LOCATION OF CONTROLS 3 5mm Jack Port fy a Micro USB Port iPhone Dock Earpiece Multi Function Button MFB Volume Button MMO3i Handset Base Charging Pin Microphone How to use the MMO3i PLEASE READ THESE INSTRUCTIONS CAREFULLY before using your new handset IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards There are however some installation and operation precautions which you should be particularly aware of 1 Read these instructions 2 Keep these instructions NOOK 8 Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Only use attachments accessori
8. call Do nothing ignore incoming call TROUBLESHOOTING No connection between your MMOSi and your Mobile Phone The first thing to do is to make sure that your mobile phone and the MMO3i have recognized each other and are properly paired together The next thing to check is if the MMOSi and your mobile phone are within a 10m range maximum open area Your iPhone does not fit into the built in universal dock There might be some obstructions on the dock Check whether there are any obstructions on the connector and on the dock If everything is secured place your iPhone back into the dock Your iPhone is not charged even though it is in the dock Your iPhone might not be properly docked Take your iPhone out of the dock and remove any obstructions on the connector from the dock and on your iPhone Place your iPhone back into the dock again Your iPhone is frozen or locked up Check whether your iPhone operates correctly before placing it back into the dock Please refer to the owner s instruction manual of your iPhone Remember that your iPhone will only be charge when the AC adapter is connected to the base SPECIFICATIONS Bluetooth Specs V2 1 EDR Radio Frequency Range 2 4 2 4835GHz Output Power Class Class 2 Maximum Range open space 10 meters Supported Profiles HSP HFP Type of Battery Lithium ion Polymer Talk Time Working Time Up to 6 hours Standby Time Up to 32 hours Audio Outp
9. d hold the volume control button for 2 seconds or alternatively select from your mobile phone interface setting DISCONNECTING A CALL To hang up a call on your MMO3i simply place the handset back on the base or press the MFB button once INFORMATION MMO3i enables a Bluetooth connection to stay paired even if the MMOSi handset or the mobile phone is switched off and on again Please also note that MMO3i can memorize up to 4 devices This feature allows Bluetooth re connection when either one of the Bluetooth device is switched off and on again MMO3i will auto reconnect to the last connected device If last connected device is not available it will try to connect to the next device on the list OTHER FUNCTIONS OF THE MM03i HANDSET SYNCING YOUR iPHONE Your MMO3i can also synchronize your iPhone with your computer a Unplug the AC adaptor from the power outlet and disconnect the cable from the MMO3i base b Plug the Micro USB USB cable into the MMO3i base and USB port of your computer accordingly c The synchronization process between your computer and your iPhone will automatically start whenever your iPhone will be docked REJECTING INCOMING CALLS To reject a call on your MMO3i press and hold the MFB button for 2 seconds VOLUME CONTROL During a call to adjust the volume on your MMOSi simply press the volume control button to increase the volume or button to decrease it REDIAL LA
10. eat the pairing process If you need to pair an additional phone simply repeat the process PAIRING THE MMO3i HANDSET WITH YOUR iPHONE OR ANY BLUETOOTH WIRELESS TECHNOLOGY MOBILE PHONE The MMOSi can store pairing information for up to 4 Bluetooth devices If you pair a fifth device it will replace the stored pairing information for the device that has not been connected to the MMO3i for the longest time You can connect the MMO3i to two Bluetooth devices at the same time For more information please see USING MORE THAN ONE BLUETOOTH DEVICE AT THE SAME TIME MULTIPOINT USING MORE THAN ONE BLUETOOTH DEVICE AT THE SAME TIME MULTIPOINT The MMO3i supports Multipoint technology This means that you can connect the MMOSi with two different mobile phones or Bluetooth devices at the same time If either phone rings you can answer it with the MMOSi If have two phones paired and connected which one will be used When you have two phones connected to the MMOS3i e You can answer calls received on either phone with the MMOSi e If you initiate a call through the MMO3i by using the MFB button to either redial the last call or use your phone s voice dial feature then the call will happen on whichever phone is currently designated as the primary phone As explained below this is determined by a combination of connection order and active calls Which phone is the primary phone The primary phone is either the phone that is c
11. es specified by the manufacturer Please check the Location of controls section to locate and identify functional buttons CONNECTING YOUR MMO03i TO YOUR iPHONE OR ANY BLUETOOTH WIRELESS TECHNOLOGY MOBILE PHONE STEP 1 CHARGE YOUR MMO3i HANDSET a Connect the AC adaptor provided to the MMOSi base b Plug the AC adaptor into a power outlet c Finally place the MMO3i handset in the charging base to charge the battery The MMOSi comes with a build in rechargeable battery It takes two or three hours to fully recharge the battery The white LED on the base is a charging indicator It will turn on when the handset is placed on the base for charging and turn off when it is fully charged When your MMOSi handset has low battery the red LED of the handset will start blinking and it will play low battery alert tone every minute Place the handset back to the base to charge it NOTE You can also use the Micro USB USB cable provided to connect your MMO3i base directly to the USB port of your computer to recharge the handset Depending on the computer the charge time may vary Please find the computer charging se quences below If your computer supply enough power the iPhone and the MMO3i will be charged simultaneously If your computer cannot supply enough power the iPhone will be charged first and the handset will start charging once the iPhone is fully recharged STEP 2 TURN YOU
12. how you want your MMO3i to ring on incoming calls You have a choice of 15 ringtones a To enter the ringtone selection mode on you MMO3i press and hold the volume control and buttons together for 2 seconds Your MMO3i will then play the current ringtone b To go through the ringtone list press the volume control button to play the next ringtone and press the volume control button to play the previous ringtone c To select the current playing ringtone and leave the ringtone selection mode press and hold the volume control and buttons together for 2 seconds d The ringtone volume can be adjusted anytime while the MMO3i is in standby Press the volume control button to increase the volume or button to decrease it INFORMATION Please note that the MMO3i also enables a Bluetooth connection with any laptop or desktop Mac or PC featured with a Bluetooth Wireless Technology supporting HS or HF profile to work with Skype Google Talk or other VOIP services To connect your MMO3i with your computer you need to go through the pairing process please refer to the instruction manual of your computer Please also see PAIRING THE MMO3i HANDSET WITH YOUR BLUETOOTH WIRELESS TECHNOLOGY MOBILE PHONE If you experience problem such as hearing the sound coming out from the computer instead of your MMO3i please check that your MMOSi has been selected on the Audio Preferences
13. onnected to the MMO3i most recently or the phone that had the last active call e When your phones connect to the MMO3i the one that connects last becomes the primary phone e Every time you have an active call through the MMO3i incoming or outgoing the phone with the call becomes the primary phone e lf both phones go out of range and come back into range together then the primary phone will be whichever one happens to reconnect last with the MMO3i Setting the Primary Phone You can force the MMO3i to change the primary phone by doing any of the following e Answer an incoming call the phone receiving the call will become the primary phone e Initiate a call from one of the phone the phone making the call will become the primary phone a Multiple Calls in a multipoint connection scenario The MMOS3i does not allow you to call from 2 phones simultaneously If you receive a call from Bluetooth Device B while you are already on an ongoing call on Bluetooth Device A you will hear a special ringtone in the MMOSi e Press MFB button once to end the current call and accept the incoming call e Double press MFB button to hold the current call and accept the incoming call e Or do nothing if you want to ignore the incoming call and continue with the current call Bluetooth Device A Bluetooth Device B MEB button Short press end current call accept incoming call e Double press hold current call accept incoming
14. subject to these regulations By recycling reusing the materials or other forms of utilizing old devices you are making an important contribution to protecting our environment amp Bluetooth BLUETOOTH The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc And any use of such marks by Native Union is under licence Bluetooth QDID BO18618 Designed in France by David Turpin www nativeunion com Spec is subject to change without prior notice Native Union and Native Union Logo are registered trademarks of Design Pool Ltd All other trademarks and registered trademarks are the property of their respected owners iPhone is a Trademark of Apple Inc Other product and company names mentioned herein may be trademarks of their respective companies Works with iPhone means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards
15. ut 0 25W RMS Power Supply AC100V 240V 50 60Hz 5v 1A Operating Temperature 0 45 C f you are having any problem getting your MMO3i to work please go to www nativeunion com for further information or consult your retailer f neither of those solves the problem please feel free to e mail us at support nativeunion com and we will do our best to help you LIMITED WARRANTY f the product appears to be damaged or does not function properly please follow the advice in this booklet f you cannot find any solution in this booklet please go to www nativeunion com support for instructions on how to obtain warranty service CE Regulations According to R amp TTE Declaration of Conformity Native Union declares that MMO3i is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC in conformity with the following standards EN300 328 EN301 489 1 EN301 489 17 and EN60950 1 The declaration of conformity is available at Design Pool Limited Nam Wo Hong Building 148 Wing Lok Street Sheung Wan Hong Kong FCC COMPLIANCE STATEMENT FC This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could
Download Pdf Manuals
Related Search