On Networks PL200
Contents
1. networks Installation Guide Powerline 200 Home Network Adapter PL200 Works 3 z Works 2 E ES a 2 I 5 a 2 SA E 2 Trademarks Brand and product names are trademarks or registered trademarks of their respective holders Information is subject to change without notice Statement of Conditions In the interest of improving internal design operational function and or reliability On Networks reserves the right to make changes to the products described in this document without notice On Networks does not assume any liability that may occur due to the use or application of the product s or circuit layout s described herein This symbol is placed in accordance with the European Union Directive 2002 96 on the Waste Electrical and Electronic Equipment the WEEE Directive If disposed of within the European Union this product should be m treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive LED descriptions Item Power LED 9 Description Solid green The electrical power is on Solid amber The adapter is in power saving mode Blinking green The adapter is in the process of setting up security Off There is no electrical power Ethernet LED ri Performance Indicator 2 Solid green The Ethernet port is linked Off There is no Ethernet connection Solid green The adapter is connected to a Powerline2. network Off The adapter has not found any other compatible Powerline devices using the same encryption key Button descriptions Reset button Security button Ethernet port Factory Reset Security Button Press the Reset button for 1 second then release it to return the Power line adapter to its factory default set tings After you plug in your new AV adapter press the Security button for 2 seconds then press the security button on one ofthe other AV adapt ers in your existing network for 2 sec onds Both buttons must be pressed within 2 minutes Install your Powerline adapter For each Powerline adapter you are adding to your existing Powerline network do the following 1 Plug each Powerline adapter into a power outlet 2 Set up security on your Powerline adapter to add it to your existing Powerline network Press the Security button for 2 seconds then press the Security button on one of the other Powerline adapters in your existing network for 2 seconds Both buttons must be pressed within two minutes Note Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other indicated by the blinking Powerline LED Pressing this button too soon can temporarily disable Powerline communication If this should occur use the Factory Reset button to return the Powerline adapter to its factory default
3. settings 3 Connect devices to your Powerline adapter To the Ethernet port on the bottom of the Powerline adapter you can connect a device such as a router or a computer Safety Information e input 100 240V 60m A Max e Operating temperature 0C 40C e The socket outlet shall be installed near the equipment and shall be easily accessible Technical Support Thank you for selecting On Networks products After installing your device locate the serial number on the label of your product and use it to register your product at http www on networks com register Registration is required before you can use the telephone support service Registration through http www on networks com register is strongly recommended Go to http www on networks com support products pl200 for product updates and web support For additional information about setting up configuring and using your USB wireless adapter see the User Manual For complete DoC visit http www on networks com doc pI200 For GNU General Public License GPL related information visit http www on networks com gpl on networks Easy Reliable amp Secure 201 02 15130 April 2012
Download Pdf Manuals
Related Search