AMX MIO-RCC-KIT
Contents
1. Configuration Mode 1 The Configuration Mode allows you to set the battery type on the Mio R 1 and R 2 remotes To enter Configuration Mode 1 Press and hold the STOP button and the INPUT button simultaneously The two buttons must be pressed within 0 1 seconds of each other and held down for 2 seconds The device indicates that you are now in Configuration Mode See below for available modes Rechargeable Battery Port Connection Battery Type 2 Pressing button 6 on the remote toggles the battery type between Normal and Recharge The display indicates the selected type The type of battery dictates the battery type to be selected 3 Press the EXIT key when you are finished Note Your settings will not be lost in the event your batteries die or are removed fn ee ee eet FIG 4 Rechargeable Battery Port on The Mio Remote 9 Press the battery between the rubber pads with the sticker showing in the housing area of the Mio remote Confirm that the battery is flush with t2. DAT Installation Guide ew P a S Mio RCC Rechargeable Upgrade Kit and Charging Base Mio Remote Charging Base Specifications The Mio series of remotes are complemented either with a Mio RCC charging The specifications for the Mio remote charging base and kit are as follows base FG147 02 or the Mio RCC rechargeable upgrade kit FG147 03K One Mio RCC Remote Charging Kit FG147 03K with Base FG147 02 Specifications charging base a new back housing and a Mio RBP rechargeable lithium ion battery FG147 10 are included with the rechargeable upgrade kit The charging base upgrade kit transforms the Mio R 1 and Mio R 2 into a rechargeable Dimensions HWD Charging Base 1 61 4 09 cm height 4 25 10 80 cm device diameter Lithium lon Battery 2 13 x 1 38 x 28 5 41 cm x 3 45 cm x 71 cm e 1 15 Ibs 52 kg Remote Charging Cradle e 15 Ibs 07 kg Power Supply 06 Ibs 027 kg Rechargeable Lithium Battery Included Rechargeable Lithium lon battery 4 hours battery life Kit Accessories only Back housing Kit only Mio RCC Charging base FG147 02 with Power Supply Power supply Kit only Other AMX Mio RCC Charging Base FG147 02 with Power Supply i Equipment Mio R 1 FG147 Mio R 2 RF 418 FG147 418 Mio R 2 RF 433 FG147 433 Mio R 3 FG148 03 Mio R 4 FG148 04 Mio RBP Rechargeable Lithium lon Battery FG147 10 AXR RF 418 MHZ RF Receiver FG782 418 AXR RF 433 MHZ RF Receiver FG782 433 Mio Modero I
3. R Receiver FG5797 01xx xx indicates color FIG 1 Mio Remote Charging Base Begin with Installing The Rechargeable Battery on the Mio R 1 and R 2 for the Installing The Rechargeable Battery on the Mio R 1 and R 2 Mio RCC rechargeable upgrade kit FG147 03K or Charging The Mio Remote 1 Flip and turn the device so that the buttons are facing away from you and with the Charging Base for the Mio RCC charging base FG147 02 the device is upside down Consult the operation reference manuals for the Mio R 1 Mio R 2 Mio R 3 or 2 Holding the device in both hands place your thumbs on the battery door Mio R 4 remotes for more information These manuals are available at and push up to slide the battery door free www amx com 3 If present remove the AAA batteries 4 Remove the 6 screws shown in FIG 3 Rubber feet 6 Screw Points Angle barrel power connector FIG 3 6 Screw Points of the Back Housing for the Mio R 1 R 2 5 Remove the back housing 6 Place the new housing on the device so that the rechargeable battery port connection is now accessible FIG 4 7 Replace the 6 screws 8 Connect the terminal end of the Lithium lon battery to the port shown in Charging contacts FIG 4 It may be necessary to use a thin blunt object to fully seat the battery connector within its port p Top View m FIG 2 Mio Remote Charging Base Top and Bottom view Kc 7 Changing Battery Modes Mio R 1 and R 2 f
4. he bottom of the battery enclosure on the bottom housing 10 Replace the battery door and slide to lock it in place 11 Begin charging the battery Charging The Mio Remote with the Charging Base The Mio remotes receive power for charging from a charging base To recharge the battery in a Mio remote 1 Connect the terminal end of the power supply to the bottom external power port on the Mio remote charging base See FIG 2 for the location 2 Route the cable through the provided channel so that it comes out the side of the base 3 Connect the power cord to an external power source 4 Place the bottom of the Mio remote into the charging base so the contacts on the device are on top of the charging contacts inside the charging base The Power LED on the Mio remote blinks red to indicate it is charging and illuminates solid red when it is done Full charge cycle for a depleted battery is approximately 3 hours Avoid placing units equipped with AAA batteries in the charging base For full warranty information refer to the AMX Instruction Manual s associated with your Product s 93 0147 02 REV D hs NIMEEN ETE A 2008 AMX All rights reserved AMX and the AMX logo are registered trademarks of AMX AMX reserves the right to alter specifications without notice at any time bateg 3000 RESEARCH DRIVE RICHARDSON TX 75082 800 222 0193 fax 469 624 7153 technical support 800 932 6993 www amx com BD alt HX
Download Pdf Manuals
Related Search