Jura ENA 5
Contents
1. gt Close the cartridge holder It will click into place audibly gt Fill the water tank with cold fresh water and replace the tank gt Place a receptacle at least 500 ml under the nozzle ENA 5 Press ae ay Switch gt Tum the switch to o ponton y Prd Water Is dis charged f fom the foe Rinsing of the filter can be interrupted at any time To this purpose turn the switch clockwise The water may be slightly discoloured This is not harmful to health and does not affect the taste le e Rinsing of the filter stops automatically gt Turn the switch to position P The filter is now activated Determining and adjusting the water hardness The harder the water the more frequently the ENA requires descaling It is therefore important to adjust the water hardness i Itis not possible to adjust the water hardness if the CLARIS filter cartridge is used and activated The water hardness can be adjusted between T dH and 30 dH It can also be deactivated which means that the ENA will not indicate when it has to be descaled p e The Aquadur test strip supplied as standard can be used to determine the water hardness gt Hold the test strip briefly for one second under running water gt Shake off the water gt Wait for approximately 1minute gt Read the degree of water hardness from the discolouration of the Aquadur test strip and the description on the packaging The water2. ena Instructions for Use Checked documentation comprehensible The ENA 5 Instructions for Use has been awarded the seal of approval by the independent German Technical Inspection Agency TUV SUD due to its easy to understand style its thoroughness and coverage of safety aspects amp complete Cf DocCert ENA 5 IMPORTANT SAFEGUARDS Follow the basic safety precautions These safeguards apply for machines with UL safety test see rating plate and chapter 8 Technical data When using electrical appliances basic safety precautions should always be followed to reduce the risk of fire electric shock and or injury to persons including the following Read all instructions Do not touch hot surfaces Use handles or knobs To protect against fire electric shock and injury to persons do not immerse cord plugs or body of machine in water or other liquid Close supervision is necessary when any appliance is used by or near children Unplug from outlet when not in use and before cleaning Allow to cool before putting or taking off parts and before cleaning the appliance Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner Return appliance to the nearest authorized service facility for examination repair or adjustment The use of accessory attachment not recommended by the appliance manufac
3. Maintenance Cleaning the machine following a prompt 30 The ENA is prompting you to descale it Once 50 litres of water have flowed through the CLARIS filter cartridge its capacity is reached There is too little pre ground coffee in the machine The ENA stops the operation The system is too hot to begin a maintenance programme gt Descale the machine refer to Chapter 4 Maintenance Descaling the machine following a prompt gt Replace the CLARIS filter cartridge refer to Chapter 4 Maintenance Replacing the filter following a prompt gt The next time you make coffee use more pre ground coffee refer to Chapter 2 Prepara tion Pre ground coffee gt Wait for several minutes until the system has cooled or prepare a coffee speciality or hot water 6 Troubleshooting ENA 5 Problem Cause Result Action Grinder is making a very loud noise There are foreign objects in the grinder gt Contact customer support in your country Contact information Is available on the company website at www jura com The nozzle does not produce enough milk foam Coffee only comes out in drips during preparation Water hardness cannot be adjusted The nozzle is either in the wrong position or is dirty Coffee or pre ground coffee has been ground too finely and is blocking the sieve The CLARIS filter cartridge is activated gt Adjust the po
4. CAUTION If the wrong cleaning agent is used the machine could be damaged and or detergent residues could be left in the water gt Only use original JURA care products The cleaning programme only lasts about B minutes i Do not interrupt the cleaning programme The quality of cleaning will be impaired if you do so i JURA cleaning tablets are available from stockists 24 Precondition Lead RERE is displayed gt Open the cover behind the Rotary Switch 4 gt Press the maintenance button gt Empty the coffee grounds container and drip tray and replace gt Turn the coffee spout to the cleaning position gt Place a receptacle under the coffee spout OMe Press ne oe Switch to start cleaning 2 Water flows out of the sone sau une pe is interrupted gt open the ae chute for for pre ground coffee and drop in a JURA cleaning tablet gt Close the powder chute for pre ground aS OMe Pres the e Rotary Switch E Water flows out of the coffee spouts several times gt Em ace te ane eereunds container and drip tray and replace ENA 5 gt Turn the coffee spout to the 1cup or 2 cup position CAUTION Risk of damage to the machine if the descaling Operation is interrupted Cleaning the machine manually gt Do not interrupt the descaling operation The Clean machine operation can be manually OS initiated CAUTION Risk of damage if the descaling agent comes into Precondition ME
5. used to protect the machine during transpor tation In order to protect the ENA from frost during transportation the system must be emptied Precondition MEF appears on the display gt Turn the Rotary Switch until PEs is displayed gt Press the Rotary Switch ecEZFay appears as soon as the ENA is sufficiently heated gt Turn the switch to position 4 ari hot steam is discharged from the nozzle gt Remove and empty the water tank Steam will continue to be discharged from the nozzle until the system is empty gt Press the on off button to switch the machine off gt Turn the switch to position P The next time you use the machine the system must be refilled see Chapter 1 Preparing and using for the first time First time use Disposal Please dispose of old machines in an environmen tally neutral way Old machines contain valuable materials which should be salvaged for recycling Please therefore dispose of old machines via your regional collection system 32 8 Technical data Voltage CEG 230VAC 50Hz 20 V AC 60 Hz 220 240 V AC 50 Hz 220 V AC 50 Hz Power 450 W Safety test QML Y Power consumption Approx B 5 Wh Approx 8 Wh Power consumption Pump pressure Static max 5 bar Holding capacity of 111 water tank Holding capacity of 25g bean container Holding capacity of Approx 10 servings coffee grounds container Cable lengt
6. Never do anything with the machine which is not described in the User s Manual In case of doubt call your dealer Keep your hands and the cord away from hot parts of the appliance during operation Never clean with scouring powders or hard implements ENA 5 ENA 5 Your ENA 5 IMPORTANT SAFEGUARDS 2 Control elements 8 Proper use D For your safety 10 Welcome to the world of JURA u JURA m the MENOT see E jil Knowledge BuildeT gaeeeeeerenee peer cermnerceenrs omer teen aaia et nia ia r a a an COMMECIOR S STCIN E rent ai nine neice ina hina neutered aul 1 Sr Collot plain text ISLAY erensia anniari nenea aaas aiaei aa arniran p 1 Preparing and using for the first time 1 SECIS UC AE EE A E E EE E EEE EE S 17 PO EVES W E aE E A P Filling the bean container cissaatsaiivageecnisoevon tinned atnoind Geo an vet ana ein eehpai gun osaanadtaonndarabaeinedutinaatdiuttaaatsbnuredentiad pP BIBS CUME USE e E E ere ee ee eee p Using and activating fiter siescaseyecdstustnnpnctcsnctitcicasinieas aces exdeanvbaindaaduisetaaed osdSeducssaeduttelossesosgussdbciaiteitebincondueesiebcand B Determining and adjusting the water hardness csssscssssssssssssssesssssssssssssssesseessssssssssssecssssseessessssssessesseess n PRO UNO INET e nee n SWNG ON EM aE sesse aeaa Ea E E RESE iii 5 SPECI We O VST ACC NAN asec tere cece eect cca ectvec te eater tno t state a ciea etpeteclens etree eneeeteenen 5 2 Preparation 16 TCO ticles the touch or a DUTON si
7. Switch to start coffee preparation gt Turn the fineness of the grinding wheel to the desired position while the grinder is running i iL the pre set amount of water flows into the cup preparation stops automati cally ENA 5 Switching on the machine When the ENA is switched on a prompt to perform a rinse operation automatically appears gt Press the on off button to switch the ENA on gt Place a receptacle under the coffee spout gt Press ne see Switch to start rinsing the system is being rinsed The operation stops automatically Switching off the machine When the ENA is switched off the system is automatically rinsed if a coffee speciality has been prepared gt Place a receptacle under the coffee spout gt Turn the coffee spout to the cleaning position gt Press the on off button RERE TPiis the system is being rinsed the operation stops automatically The ENA is Switched off gt Turn the coffee spout to the 1cup or 2 cup position i The On Off button also acts as a power switch When the ENA is switched off the machine is completely disconnected from the power supply ENA 5 2 Preparation lcoffee at the touch of a button Precondition MEF appears on the display gt Turn the coffee spout to the 1cup position gt Place the cup under the coffee spout lt gt Press the Rotary Switch to start coffee preparation During grinding the strength of the
8. button until 2 appears gt Press the Rotary Switch to enter the programme item 26 gt Turn the Rotary Switch until 282220 aL ET is displayed gt Press the Rotary Switch gt Continue with the third prompt to take action indicated by as described in the section Descaling the machine following a prompt Rinsing the Professional Cappuccino Frother To ensure that the Professional Cappuccino Frother works perfectly you should rinse it with water whenever you have prepared some milk i The ENA will not prompt you to rinse the Professional Cappuccino Frother gt Remove the milk pipe from the milk carton or milk container gt Fill a receptacle with fresh water and immerse the milk pipe in the water gt Place another receptacle under the nozzle gt Set the selector lever of the nozzle to the milk foam amp or milk ff position Turn the Rotary Switch until PEs is displayed gt Press othe eo Switch PEE appears as soon as the ENA is sufficiently heated 6 gt Turn the switch to position 4 TER the nozzle and pipe are rinsed D gt Tun the switch to position Y as soon as clean water flows into the receptacle Cleaning the Professional Cappuccino Frother To ensure that the Professional Cappuccino Frother works perfectly you should clean it daily when you have been preparing milk CAUTION If the wrong cleaning agent is used the machine could be damaged and
9. coffee is briefly displayed 21 the pre set amount of water flows into the cup preparation stops automati cally 2 coffees at the touch of a button Precondition MEF appears on the display gt Turn the coffee spout to the 2 cup position gt Place two cups under the coffee spout Turn the Rotary Switch until 2 iip is displayed gt Press the Rotary Switch to start coffee Havens E the pre set amount of water flows into the cups preparation stops automatically Pre ground coffee You can also use a second coffee blend in the powder chute for pre ground coffee i Never add more than two level measuring spoons of pre ground coffee i Do not use very finely ground coffee Very fine coffee can block up the system so that the coffee only comes out in drips If the filled amount al pre aoe coffee was feel eal a oe e S manata Ji the ENA eee P A The desired coffee speciality must be prepared within approx one minute after filling with the pre ground coffee Otherwise the ENA stops the operation and is ready to use again e Example Preparing a cup of coffee using pre ground coffee Precondition Fifty appears on the display and the coffee spout is set at the 1cup position gt Place the cup under the coffee spout gt al ss aie oe gt Place the filler funnel for pre ground coffee in the powder chute gt Place one level measuring spoon of pre ground coffee into t
10. hardness can then be adjusted Example Changing the water hardness from PD Precondition ESEY7 appears on the display gt Open pee cover behind me deal Switch P gt Press the P button until appears gt Turn the Rotary Switch until DEE is displayed Press the Rotary Switch to enter the programme item gt Turn the Rotary Switch until 2 2 is displayed gt Press the Rotary Switch to confirm the ges oo water Tiar ness is then adjusted gt Tum ae ee Switch until 27 is displayed gt Press the Rotary Switch to exit program ming mode Adjusting grinder You can adjust the grinder continuously to suit the roast of your coffee CAUTION If you adjust the fineness of grind when the grinder is not operating the grinding wheel could be damaged gt Only adjust the fineness of grind when the grinder is running The fineness of grind setting is correct if the coffee flows regularly from the coffee spout A fine thick crema is also formed Our recommendations Select a fine setting for a light roast f the fineness of grind setting is too fine the coffee only drips from the coffee spout Select a coarse setting for a darker roast f the fineness of grind is too coarse the coffee flows too quickly from the coffee spout Example Adjusting the fineness of grind during coffee preparation gt Place the cup under the coffee spout gt Press the Rotary
11. note the following Place the machine on a horizontal surface that cannot be damaged by water Select a position for the ENA where it is protected against overheating Filling the water tank To enjoy perfect coffee we recommend changing the water every day CAUTION Milk mineral water or other liquids can damage the water tank or the machine gt Only fill the water tank with fresh cold water gt Remove the water tank and rinse with cold water gt Fill the water tank with cold fresh water and replace the tank Filling the bean container CAUTION Coffee beans which have been treated with additives e g sugar pre ground or freeze dried coffee will damage the grinder gt Only use untreated coffee beans to refill the bean container gt Remove the bean container cover gt Remove any dirt or foreign objects from the bean container gt Fill the bean container with coffee beans gt Close the bean container First time use i Theon off button also acts as a power switch When the ENA Is switched off the machine is completely disconnected from the power supply AN warning If the machine is operated with a defective power cable there is a danger of electric shock gt Never use a machine which has a defective power cable Precondition The water tank must be full gt Insert the mains plug into a power socket gt Press the on off button to switch the machine on gt Turn nthe ai
12. or detergent residues could be left in the water gt Only use original JURA care products The ENA will not prompt you to clean the Professional Cappuccino Frother The JURA Cappuccino Cleaner is available from stockists ele gt Remove the milk pipe from the milk carton or milk container gt Pour 250 ml of fresh water into a receptacle and add one capful max 5 ml of the Cappuccino Cleaner gt Immerse the milk pipe in the receptacle gt Place another receptacle under the nozzle gt Set the selector lever of the nozzle to the milk foam amp or milk ff position Turn the Rotary Switch until 7 E is displayed gt Press the Rotary Switch SEES Y appears as soon as the ENA is sufficiently heated gt Turn ithe switch to position 4 TEA the nozzle and pipe are cleaned D gt Turn the switch clockwise to position P as soon as the receptacle holding the Cappuccino Cleaner is empty ENA 5 gt Rinse the receptacle thoroughly fill with 250 ml of fresh water and immerse the milk pipe in the water gt Empty the receptacle under the nozzle and replace under the nozzle Turn the Rotary Switch until TEA displayed Press the Rotary Switch EIS Peret appears as soon as the ENA is sufficiently heated Turn the switch to position 4 PEF the nozzle and pipe are rinsed with fresh water gt Turn the switch clockwise to position as soon as the recepta
13. 1 Machine Cleaning 24 Descaling 25 Rinsing 23 Switching off 5 Switching on B Maintenance 22 Cleaning the bean container 29 Cleaning the machine 24 Descaling the machine 25 Descaling the water tank 29 Rinsing the machine 23 Tips 22 33 34 Art 67323 ENA 5 en 201007 ENA5 P W P button 9 Water amount Powder chute for pre ground coffee 8 Default setting V Preparation Water hardness Coffee 16 Determining and adjusting 4 Pre ground coffee 16 Water tank 8 Preparing Descaling 29 Hot water 20 Filling P Preparing and using for the first time 2 Professional Cappuccino Frother 9 Cleaning 27 Dismantling and rinsing 27 Rinsing 26 Programming mode Automatic switch off 21 Prompt to take action Symbol description 7 R Directives Rating plate 10 The machine complies with the following EU Rinsing directives Easy Cappuccino Frother 27 2006 95 EC Low Voltage Directive Machine 23 2004 8 EC Electromagnetic Compatibility Professional Cappuccino Frother 26 Rotating coffee spout 8 Technical changes S We reserve the right to make technical changes Safety For your safety 10 The illustrations used in the ENA 5 Instructions Settings for Use show the ENA 5 Blossom White model Default in programming mode 20 Your ENA could incorporate minor changes One off setting before and during preparation a Feedback setting up P Your opinion is important to us Switch off Automatic 2i Use the contact link at www jura com Switch for hot water and s
14. F appears on the display contact with sensitive surfaces gt Open the cover behind the Rotary Switch gt Remove splashes immediately P gt Press the P button until 22 appears gt Press the Rotary Switch to enter the The descaling programme lasts approx programme item 40 minutes See i JURA descaling tablets are available from Turn the Rotary Switch until 2 2555 is stockists displayed lfa CLARIS filter cartridge is used and gt Press the Rotary Switch activated you will not be prompted to EMPTY TRAY descale the machine gt Continue with the third prompt to take action indicated by gt as described in the Precondition S 058 2 ees is section Cleaning the machine following displayed a prompt gt Open the cover behind the Rotary Switch b gt Press the maintenance button Descaling the machine following a prompt gt Empty the coffee grounds container and The ENA builds up limescale deposits over time drip tray and replace and automatically prompts you to descale the PsP PRE PRRER machine when necessary The degree of build up gt Remove and empty the water tank depends on the hardness of the water gt Completely dissolve the contents of one oS blister 3 JURA descaling tablets in a A CAUTION container holding 500 ml of water This If the descaling agent comes into contact with the may take several minutes skin or eyes this can cause irritation gt Avoid contac
15. a qualified electrician Do not modify the plug in any way or attempt to defeat this Safety feature Warning To reduce the risk of fire or electric shock do not remove any service covers No user serviceable parts inside Repair should be done by authorized personnel only Caution This appliance is for household use Any servicing other than cleaning and user maintenance should be performed by an authorized service representative Do not immerse base in water or try to disassemble To reduce the risk of fire or electric shock do not remove the base No user serviceable parts inside Repair should be done by authorized service personnel only Check voltage to be sure that the voltage indicated on the name plate agrees with your voltage Never use warm or hot water to fill the water container Use cold water only Keep your hands and the cord away from hot parts of the appliance during operation Never clean with scouring powders or hard implements ENA 5 NEVER DO or you will void your warranty protection Never fill instant coffee chocolate mix etc into the grinder or ground coffee funnel grinder by pass It will damage the functioning of the brewing chamber Never fill sugar coated coffee beans into the bean hopper In case of doubt call your dealer Never fill anything other than coffee beans into the bean container no chocolate no rice no nuts no spices nothing other than roasted coffee beans
16. cle holding the water is empty en Dismantling and rinsing the Professional Cappuccino Frother gt Carefully remove the Professional Cappuc cino Frother from the Connector System gt Dismantle the frother completely gt Rinse all parts thoroughly with running water gt Reassemble the Professional Cappuccino Frother and attach it to the Connector System Rinsing the Easy Cappuccino Frother To ensure that the Easy Cappuccino Frother works perfectly you should rinse it with water whenever you have prepared some milk 27 ENA 5 The ENAwill not prompt you to rinse the Easy Cappuccino Frother gt Remove the milk pipe from the milk carton or milk container gt Fill a receptacle with fresh water and immerse the milk pipe in the water gt Place another ian under the nozzle gt Turn the Rotary Switch until PEF is displayed gt Press the Rotary Switch ecEFaEy appears as soon as the ENA is sufficiently heated Turn the switch to position 4 arim the nozzle and pipe are rinsed gt Turn the switch to position as soon as clean water flows into the receptacle Cleaning the Easy Cappuccino Frother To ensure that the Easy Cappuccino Frother works perfectly you should clean it daily when you have been preparing milk CAUTION If the wrong cleaning agent is used the machine could be damaged and or detergent residues could be left in the water gt Only use origi
17. clean water Wipe the surface of the machine with a damp cloth Rinse the nozzle regularly if it is used to warm or froth milk Rinsing the machine manually When the ENA is switched on a prompt to perform a rinse operation automatically appears after heating When the ENA is switched off the system is automatically rinsed if a coffee speciality has been prepared The Rinse machine operation can be manually initiated Precondition HEF i appears on the display gt Turn the coffee spout to the cleaning position gt Place a receptacle under the coffee spout gt Open the cover behind the Rotary Switch P gt Press the P button until 2 appears gt Press the Rotary Switch to enter the poran item gt Press sthe o Switch to start rinsing EHME rinsing stops automatically gt Turn th coffee spout to the 1cup or 2 cup position Changing the filter following a prompt i After 50 litres of water have flowed through the filter its capacity is reached The ENA automatically prompts you to replace the filter ele lo ENA 5 After two months the filter capacity is reached The elapsed time can be checked with the date plate on the cartridge holder If the CLARIS filter cartridge is not activated you will not be prompted to change the filter Precondition RESE F ELTER is displayed gt Open the cover behind the Rotary Switch hy i gt Press the mai
18. e Switch until i E 4 is displayed gt Press the Rotary Switch to confirm the ang uage setting e B is then adjusted gt eee a tea under the nozzle 6 gt Turn mine switch to is l gt Turn the switch to position P gt Place a receptacle under the coffee spout gt Press the Rotary Switch to start rinsing i When a coffee speciality has been ii for Be Uist time it is possible that Fi minm appears on the display as the ie has not yet been completely filled with coffee beans In this case prepare a different coffee speciality ENA 5 Using and activating filter Your ENA no longer requires descaling if you use CLARIS filter cartridges i Perform the Insert filter operation without interruptions This will ensure optimum function of your ENA After two months the filter capacity is reached The elapsed time can be checked with the date plate on the cartridge holder le Precondition Fir appears on the display gt Open the cover behind the Rotary Switch P gt Press the P button until 2HE appears Turn the Rotary Switch until FELTER is displayed gt Press the Rotary Switch to enter the ame item gt Tum the Rotary Switch until appears gt Press the Rotary Switch to confirm the setting gt Remove and empty the water tank gt Open the cartridge holder gt Insert the new filter cartridge into the water tank pressing it slightly
19. h Approx 11m Weight Approx 9 3 kg Dimensions 23 8 x 36 x 44 5 cm WxHxD 9 Contacts Contact information is available on the company website at www jura com Index 2 stage frothing nozzle 9 Dismantling and rinsing 29 3 colour plain text display 2 A Adjusting Energy saving mode 21 Grinder 4 Language 22 Units of water 22 Automatic switch off 21 Bean container Cleaning 29 Filling 2 Cappuccino With the 2 stage frothing nozzle 19 With the Easy Cappuccino Frother 3 With the Professional Cappuccino Frother 1 Cleaning Easy Cappuccino Frother 28 Machine 24 Professional Cappuccino Frother 27 Coffee At the touch of a button 16 Pre ground 16 Coffee grounds container 8 Connector System 8 Il Contacts 32 Cover 9 Bean container 8 Cup platform 8 Descaling JURA descaling tablets 25 Machine 25 Water tank 29 Dismantling and rinsing 2 stage frothing nozzle 29 Easy Cappuccino Frother 29 Professional Cappuccino Frother 27 Display 9 Messages 30 ENA 5 Disposal Environmentally neutral disposal 32 Drip tray 8 Easy Cappuccino Frother 8 9 Cleaning 28 Dismantling and rinsing 29 Rinsing 27 Filter Changing 23 Using and activating filter B First time use P Grinder Adjusting grinder 4 Grinding wheel 9 Heating milk With the 2 stage frothing nozzle 20 With the Professional Cappuccino Frother 19 Hot water 20 Hot water nozzle 9 Internet JURA on the Internet 1 Knowledge Builder 11 Knowledge Builder 1
20. he filler funnel gt Remove the filler funnel gt o Tie ca chute e ihe Rotary Switch to start coffee preparation i iL the pre set amount of water flows into the cup preparation stops automati cally It is also possible to prepare two cups of pre ground coffee To this purpose place two level measuring spoons of pre ground coffee into the filler funnel Turn the Rotary Switch to 2 22 and press to start coffee preparation e One off setting before and during preparation The coffee strength can be changed before preparation or during the grinding operation The following coffee strength options are possible for 1coffee Mild Normal Strong i 2coffees are always prepared with the coffee strength mild The pre set amount of water can be changed during the brewing operation by turning the Rotary Switch le One off settings before and during coffee preparation always follow this model These settings are not saved Example Changing the coffee ase of lee ae preparation from PSPF CO precondition iy appears on the display and the coffee Ha is set at the 1cup position gt Place the cup under the coffee spout Turn the Rotary Switch until PFs is displayed gt Press the Rotary Switch until P43 is displayed ENA 5 During grinding the coffee strength TENS is displayed 2F the pre set amount of water flows into the cup preparation stops automati cally En
21. iisi san Aani TSS ATE 28 Dismantling and rinsing the Easy Cappuccino Frother es sssssessrrressrrrssrnnssrrnnnrrnnnnrnnnnnnennnrnnnnrnnnnrnnnnnrne 29 Dismantling and rinsing the 2 stage frothing NOZZIC ssssesssscssssssesssssssssssessssscessessesssseesssessssesseeseeesses 29 Cleaning the bean container sicansrsopnetiansdeciiminionrstaniinianeintseeintiaduataantwinnaiianiyatnitinudihatsninannieeeiidase nice 29 Descaling the water CANK sirssitsiersircasinicsessinssdcsinvectivoeneciceoriivisinibunntinaniecianvinisiburdibivigianuninipianiiieetneeeennieiiitie 29 5 Display messages 30 6 Troubleshooting 31 7 Transport and environmentally neutral disposal 32 Transport Emptying the system essssssssrssssrrnssrrennsrrnnnrrnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnannnnnnnnnnnnnnneaa 32 Bea SA AE E EEE E E E A E E EENE S 32 8 Technical data 32 9 Contacts 32 Index 33 Symbol description Warnings A CAUTION Always take note of any information marked with the CAUTION or WARNING symbol The signal word WARNING points out potential risk of serious injury and the signal word CAUTION potential risk of slight injury Symbols used i Information and tips to make use of your ENA even easier Prompt to take action This symbol means that you are being prompted to perform an action CAUTION The CAUTION symbol is used to draw attention to circumstances which could result in damage to the machine Refere
22. ismantle the nozzle completely gt Rinse all nozzle parts thoroughly with running water gt Reassemble the Easy Cappuccino Frother and attach it to the Connector System Dismantling and rinsing the 2 stage frothing nozzle To ensure the correct function of the 2 stage frothing nozzle clean it regularly if you have heated or frothed milk AN caution Danger of burns on the hot nozzle and nozzle connector gt Wait until the nozzle has cooled before cleaning gt Carefully remove the nozzle from the Connector System gt Unscrew the nozzle using the opening on the measuring spoon for pre ground coffee ENA 5 gt Rinse all three nozzle parts thoroughly under running water gt Reassemble the nozzle and attach it to the Connector System Cleaning the bean container Coffee beans may be covered with a slight oil film which remains on the walls of the bean container These residues may negatively affect the coffee results For this reason clean the bean container from time to time gt Press the on off button to switch the machine off Disconnect the mains plug Remove the bean container cover gt Remove the coffee beans with a vacuum cleaner Clean the bean container with a soft dry cloth gt Fill the bean container with fresh coffee beans then close the bean container cover v A v Descaling the water tank Limescale deposits may form in the water tank To ensure c
23. itch until iiH Y is displayed gt Press the Rotary Switch to enter the peau item One Tum the Rotary Switch until lt displayed gt Press the Rotary Switch to confirm the sei oe units of water are then adjusted O gt Tum the Rotary Switch until 2 27 is displayed gt Press the Rotary Switch to exit program ming mode Language The language is selected when the machine is used for the first time 22 aaa i par a from e one appears on the display gt Open pee cover so me o Switch P gt Press the P button until appears Turn the Rotary Switch untie E is displayed Press the Rotary Switch to enter the programme item gt Turn the Rotary Switch until ppp p IEEE is displayed gt Press the Rotary Switch to confirm the ae uke ee is then adjusted gt Tum ce ven Switch until 27 is displayed gt Press the Rotary Switch to exit program ming mes Sooo seve sooo 4 Maintenance The ENA has the following integrated mainte nance programmes Rinse machine Change filter Clean machine Descale machine i Clean or descale the machine or change the filter whenever the appropriate indicator lights up Maintenance tips To ensure a long service life and the best possible coffee quality the ENA requires the following daily care Empty the coffee grounds container and drip tray and rinse with warm water Rinse the water tank with
24. nal JURA care products The ENA will not prompt you to clean the Easy Cappuccino Frother 1 The JURA Cappuccino Cleaner is available from stockists pm o 28 gt Remove the milk pipe from the milk carton or milk container gt Pour 250 ml of fresh water into a receptacle and add one capful max 5 ml of Cappuccino Cleaner gt Immerse the milk pipe in the receptacle gt Place another receptacle under the nozzle Turn the Rotary Switch until PEF is displayed gt Press the Rotary Switch ScEFaEy appears as soon as the ENA is sufficiently heated Turn the switch to position 4 TEER the nozzle and pipe are cleaned gt Turn the switch clockwise to position P as soon as the receptacle holding the Cappuccino Cleaner is empty gt Rinse the receptacle thoroughly fill with 250 ml of fresh water and immerse the milk pipe in the water gt Empty the receptacle under the nozzle and replace under the nozzle Turn the Rotary Switch until PEA displayed gt Press the Rotary Switch S ecEZEaE y appears as soon as the ENA is sufficiently heated Turn the switch to position 4 TER the nozzle and pipe are rinsed with fresh water gt Turn the switch clockwise to position Y as soon as the receptacle holding the water is empty Dismantling and rinsing the Easy Cappuccino Frother gt Carefully remove the Easy Cappuccino Frother from the Connector System gt D
25. nces to the JURA website where you can find interesting additional infor mation www jura com ENA5 Control elements 1 2 Figure ENA 5 Blossom White 1 Water tank 2 Powder chute for pre ground coffee 3 Coffee grounds container 4 Drip tray 5 Cup platform Bean container cover Switch for hot water and steam preparation Connector System for removable nozzles Easy Cappuccino Frother Rotating coffee spout ENA 5 Figure Open cover Maintenance button Hot water nozzle Rotary Switch 1 On off button 7 Display 2 Grinding wheel 8 Professional Cappuccino Frother 3 Cover 9 Easy Cappuccino Frother 4 P P button D 2 stage frothing nozzle 5 ji 6 The following nozzles are available from stockists and can be fitted to the Connector System ENA 5 Proper use The machine has been designed and built for domestic use It should only be used to prepare coffee and to heat milk and water Use for any other purpose will be deemed improper JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use Before using the machine always carefully read and comply with all these instructions Keep this manual close to the ENA and pass it on to the next user if applicable For your safety Please read and note the following important safety information carefully This can prevent potentially fa
26. no Frother Precondition FF appears on the display gt Remove the protective cover from the Professional Cappuccino Frother gt Connect the milk pipe to the nozzle gt Insert the other end of the milk pipe into a milk carton or connect it to a milk container gt Place a cup under the nozzle gt Set the selector lever of the nozzle to the milk F position mo displayed gt Press the Rotary Switch Hirer appears as soon as the ENA is sufficiently heated gt Turn the switch to position df TER the hot milk is being prepared gt Turn the switch clockwise to position Y when there is sufficient milk in the cup You can prepare more hot milk within about 40 seconds To ensure that the Professional Cappuccino Frother works perfectly it should be rinsed and cleaned regularly refer to Chapter 4 Maintenance Professional Cappuccino Frother ENA 5 Heating milk with the 2 stage frothing nozzle Precondition MEF appears on the display gt Push the 2 stage frothing nozzle to the top position gt Place a cup of milk below the 2 stage frothing nozzle and immerse the nozzle in the milk i Ifthe nozzle does not reach into the cup lift the cup towards the nozzle Turn the Rotary Switch until TEs is displayed gt Press the Rotary Switch ecEFay appears as soon as the ENA is sufficiently heated gt Turn the switch to position LL steam gt Turn the switch to
27. ntenance button gt Remove and empty the water tank gt Open the cartridge holder and remove the old filter cartridge gt Insert the filter cartridge into the water tank exerting slight pressure gt Close the cartridge holder It will click into place audibly gt Fill the water tank with cold fresh water and replace the tank gt Place a receptacle at least 500 ml under the nozzle gt Press me a Switch gt Tum the saith to opun 4h water Is dis ey foi the mA Rinsing of the filter can be interrupted at any time To this purpose turn the switch clockwise The water may be slightly discoloured This is not harmful to health and does not affect the taste 23 ENA 5 eran of be a stops automatically D gt Tum ithe snitch to position P Changing the filter manually The Change filter operation can be manually initiated Precondition fi appears on the display gt Open the cover behind the Rotary Switch P gt Press the P button until 2 appears gt Press the Rotary Switch to enter the potas item gt Tum the Rotary Switch until LP EF is displayed Press a oa oie gt corte with the third prompt to take action indicated by gt as described in the section Changing the filter following a prompt Cleaning the machine following a prompt After 180 coffee preparations or 80 switch on rinses the ENA will prompt you to clean the machine
28. o position 4 i the milk foam is being prepared Tun the switch clockwise to position when there is sufficient milk foam in the cup 8 E Tame eee feet Te awe 1 You can prepare more milk foam within about 40 seconds Place the cup under the coffee spout Press the Rotary Switch to start coffee preparation 21 the pre set amount of water flows into the cup Preparation stops automati cally To ensure that the Professional Cappuccino Frother works perfectly it should be rinsed and cleaned regularly refer to Chapter 4 Maintenance Professional Cappuccino Frother Cappuccino with the Easy Cappuccino Frother Precondition RERE Y appears on the display and the coffee spout is set at the 1cup position B O gt 6 gt D gt me v Remove the protective cover from the Easy Cappuccino Frother Connect the milk pipe to the nozzle Insert the other end of the milk pipe into a milk carton or connect it to a milk container Place a cup under the nozzle Turn the Rotary Switch until displayed Press the Rotary Switch eSESFaE y appears as soon as the ENA is sufficiently heated Turn mine switch to position 4 the milk foam is being prepared Tun the switch clockwise to position when there is sufficient milk foam in the cup C eee N a T You can prepare more milk foam within about 40 seconds Place the cup under the coffee spout Press the Rotary Switch
29. orrect function of the machine descale the water tank from time to time gt Remove the water tank gt f a CLARIS filter cartridge is used remove the cartridge gt Descale the tank with a mild commercially available descaling agent in accordance with the instructions of the manufacturer gt Rinse the water tank thoroughly gt f a CLARIS filter cartridge is used replace the cartridge gt Fill the water tank with cold fresh water and replace the tank 29 ENA 5 5 Display messages Message Cause Result Action The water tank is empty You cannot prepare any coffee specialities hot water or steam gt Fill the water tank refer to Chapter 1 Preparing and using for the first time Filling the water tank The coffee grounds container is full You cannot prepare any coffee specialities but you can prepare hot water or steam The drip tray is not inserted correctly or is not inserted at all You cannot prepare any coffee specialities hot water or steam The bean container is empty You cannot prepare any coffee specialities but you can prepare hot water or steam The ENA is prompting you to clean the machine gt Empty the coffee grounds container and the drip tray gt Insert the drip tray gt Fill the bean container refer to Chapter 1 Preparing and using for the first time Filling the bean container gt Clean the machine refer to Chapter 4
30. ower cable to hang down loosely The power cable could trip someone or be damaged Protect your ENA from environmental influences such as rain frost and direct sunlight Do not put the ENA cable or connections in water Do not put the ENA or any individual parts in the dishwasher Turn your ENA off and disconnect the mains plug before starting any cleaning operation Always wipe your ENA with a damp cloth never a wet cloth and protect it from constant water splashes Only connect the machine to a power supply in accordance with the information on the rating plate The rating plate is located on the underside of your ENA Further technical data is given in Chapter 8 Technical data Use only original JURA care products Use of accessories that are not explicitly recommended by JURA could damage the ENA Do not use any coffee beans treated with additives or caramelised coffee beans Always fill the water tank with cold fresh water If you are absent for a prolonged period of time turn the machine off ENA 5 People including children who Connector System do not have the physical sensory or mental The Connector System permits the use of four capabilities to use the machine safely or different nozzles are inexperienced or lack knowledge in how Professional Cappuccino Frother to use the machine safely Cappuccino must be supervised by a responsible person when Hot milk using it or m
31. position as soon as the required temperature Is reached You can prepare more steam within about 40 seconds p e To ensure that the 2 stage frothing nozzle works perfectly it should be rinsed regularly refer to Chapter 4 Maintenance Dismantling and rinsing the 2 stage frothing nozzle 20 Hot water 1 To prepare hot water attach either the hot water nozzle or the 2 stage frothing nozzle to the Connector System ZX caution There is a danger of scalding from hot water Splashes gt Avoid direct contact with the skin Precondition FEF appears on the display gt Place a cup under the nozzle gt Turn the switch to position 4 24YTEF hot water flows into the cup gt Turn the switch clockwise when there is sufficient water in the cup 3 Default settings in programming mode Products The following settings can be programmed for lcoffee Amount of water 33 ML eg Pi Coffee strength HELE PERRINE Temperature PGERMAL HIGH The following applies when preparing 2 coffees The amount of water set for Lcoffee is dispensed per cup when 2 cups are prepared 2 coffees are always prepared with the coffee strength mild 2 coffees are prepared at the same tempera ture which is set for 1coffee Default settings in programming mode always follow the same model Example Changing the default setting for the strength of one coffee from Hitiri to Precondition Ff a
32. ppears on the display gt Open the cover behind the Rotary Switch P gt Press the P button until 2 appears gt Turn the Rotary Switch until F PAcHELESY Is displayed gt Press the Rotary Switch to enter the programme item Turn the Rotary Switch until 374 is displayed gt Press the Rotary Switch to enter the programme item Turn the Rotary Switch until 7 E305 is displayed gt Press the Rotary Switch to confirm the as ame conige strength is then adjusted gt Tum th ven Switch until is displayed gt Press the Rotary Switch to exit the preg amine item gt Tum in Rotany Switch until 2227 is displayed gt Press the Rotary Switch to exit program ming mode Energy saving mode A default energy saving mode Energy Save Mode E S M setting can be selected on the ENA Programme item ERER e F The ENA is then in constant stand by mode All coffee products as well as hot water can ka oe without having to wait Aneta approx 5 minutes the ENA switches to the energy saving temperature and is not ready for use ENA 5 Before coffee or hot water is prepared the machine heats up oe ee ne eaa saving mode from F Ea toe fe peiin Pe preconditions ied appears on the display gt Open fee cover r behind the Rotary Switch P gt Press the P button until 22 appears gt Turn the Rotary Switch until HERS is displayed gt Pre
33. seedtemaaieen 21 CURIS OT NO a E recente 22 LOUE e E E cngatebecandeceniate otaanceenerescneneetee 22 4 Maintenance 22 EAEEREN E E E E E EE E E E 22 Rinsing the machine Manually sonses nsaan 23 Changing the filter following a PFOMP c sessecsesessessssesssssssssessessssessssessssssssssssessssessseassesansessssassesansesserasssees 23 Changing the filter manually sauicsixapnsintvacavsausntinranion inirietaatichuoisGonontnnetsGindannndldniantninnaeteieahGiece negates 24 Cleaning the machine following a prompt s ssssscsssessssessssssssssssessssssssssssessesssssssesessesessssassessnsessssassssseeesssees 24 Cleaning the maine manually annn ianea iaai OETA 25 Descaling the machine following a prompt sisisi aiana aeaoe aitia 25 Descaling the machine manually sissasnicsssuniseniovcasoosnsanvescvnevenevsnnnaveutinnssiotanioaivbasciaitavinanndinandintacsitivetiundaias 26 Rinsing the Professional Cappuccino FOTN EN ssi iinvenscvevinaimesiinionnecanastianeinielsiauienigniciniinatnciwienssosii 26 Cleaning the Professional Cappuccino FrOthe l ssssssssessesssssssssssssssssssssessssessecsssessssassecessessssassesassesseeasseses 27 Dismantling and rinsing the Professional Cappuccino Frother es ssssrsessrreesrrrnssnrnnssrnnnnrrrnnnrnnnnsnnnnsnnne 27 Rinsing the Easy Cappuccino Frother essssssrrsssssrensrrnnnsnnennnnnnnnnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnnnnnnnnne 27 Cleaning the Easy Cappucano Frot NEi s
34. sinio iaaa tier anna ao b 2 coffees at the touch of a button essssssessssssssressessssnrreseesssrereeesssnrrenneonsnrireeeonssrireeennsrireeeesnssnrereeossnrereeesss bb FOUN COIN E Oeser E E a bb One off setting before and duning preparation uu ccseessssssessssessessssesseessesessssessesseesssssesssesseeseesseesssssesseeatees p Entering a default setting for the amount of water for a CUD S Z sssssssrrrsssrrensrreessrrrnsnrrensrrennrrnnnsrreens T Cappuccino with the Professional Cappuccino FrOther csessssssssssesssecsessssssssessssssssesssssssessesssesssseesseesees Y Cappuccino with the Easy Cappuccino Frother c csessssssscssssssssssesssssssssssesssssssssessessessesesssssscssesssessessesseees B Cappuccino with the 2 stage frothing nozzle wciisswitaccricanvivinedniacriniseonennaavineerinartonvisdtenwisaeiieiaebieseannseannets 1 Heating milk with the Professional Cappuccino FrOthel c sssessssecsssessesssscsssessssssssssssessssesssssssessssessssasseees p Heating milk with the 2 stage TROTTING MOZZIG jsssesineseosasnssnncisienninseantapnsstosentincntiaamnardinitnsaranaandeinaeineintiseerniss 20 FU MAUS Te sarie E ate ucneessaseeeaseuteeeence 20 3 Default settings in programming mode 20 BLOC 6 kone ee ne E ee ee eee ee eee 20 Energy saving OCG unisessvinvecavinscensosaserandeveninveasncived evesatvieveisabaintesieveuiiannsnivesintsksviniounkwinedevenseannind sinntexonineseianess 21 Automatic Wit Olesea aciprontgnetec
35. sition of the nozzle refer to Chapter 2 Preparation Cappuccino gt Rinse the nozzle refer to Chapter 4 Maintenance Rinsing the nozzle gt Adjust the grinder or use coarser pre ground coffee see Chapter 1 Preparing and using for the first time Adjusting grinder gt Deactivate the CLARIS filter cartridge in programming mode FILL is displayed although th container has been filled The grinder is not yet completely filled with beans gt Prepare a coffee speciality Pikk HARTER TRardik is The water tank float is gt Descale the water tank refer to displayed although the trapped Chapter 4 Maintenance Descaling water tank is full the water tank SPL I 1S displayed If the device is exposed to gt Wait until the machine has reached the cold for a long period room temperature of time the heating function is disabled for Safety reasons Other HFF messages gt Switch the ENA off with the On Off are displayed button Contact customer support in your country Contact information is available on the company website at www jura com pm o If you have not been able to solve the problem contact customer support in your country Contact information is available on the company website at www jura com 31 ENA 5 7 Transport and environmentally neutral disposal Transport Emptying the system Keep the packaging of your ENA It should be
36. ss the Rotary Switch to enter the programme item Q gt Turn the Rotary Switch until ESRR T is displayed gt Press the Rotary Switch to confirm the phe ede e energy saving mode is then set gt Tum e Tn Switch until 227 is displayed gt Press the Rotary Switch to exit program ming mode Automatic switch off You can save energy with the automatic switch off function on the ENA i The automatic switch off time can be adjusted between 0 5 and 9 hours or deactivated MESS ans oe the automatic Switch off time from RF mm TQ UE pippi Precondition RACY appears on the display gt Open the cover behind the Rotary Switch P gt Press the P button until 2 appears Turn the Rotary Switch until 3 eR PETES js di isp ayed gt Press the Rotary Switch to enter the programme item 21 ENA 5 gt Turn the Rotary Switch until HE is displayed gt Press the Rotary Switch to confirm the ne zi the automatic switch off time is then adjusted O gt Tum diie en Switch until F is displayed amp gt Press the Rotary Switch to exit program ming mode Units of water The unit for the amount of water can be displayed in either ml or oz a Changing the units of water from the OC preconditions ify appears on the display gt Open ae cover xr behind the Rotary Switch P gt Press the P button until 2 appears gt Turn the Rotary Sw
37. t with the skin or eyes gt Rinse the descaling agent off with clean water Should you get any descaling agent in your eye consult a doctor CAUTION Risk of damage to the machine and residues in the water if the wrong descaling agent is used gt Only use original JURA care products gt Fill the solution into the empty water tank ee and replace the tank gt Carefully remove the nozzle from the Connector System 25 ENA 5 gt Place a receptacle 500 ml min under the the Connector System gt Turn the switch to position 4 f Water flows out of the Connector System several times D gt Tum the snitch to position 7 D oS the descaling operation s continued gt Empty ie a grounds container and drip tray and replace gt Empty the receptacle and place it under the one ie a once more gt Remove th water anes rinse thoroughly fill with fresh cold water and replace the a 6 gt Tum the snitch to position 4 water flows out of ie eor n several times Me m S interru pted D gt Tum the snitch to position Z D Aa the descaling operation s continued gt Empty the me grounds container and drip tray and replace gt Reattach the nozzle to the Connector System Descaling the machine manually The Descale machine operation can be manually initiated Precondition Fifi appears on the display gt Open the cover behind the Rotary Switch P gt Press the P
38. tal injury due to electric shock Never use a machine which has been damaged or which has a defective power cable If there are any signs of damage for example if there is a smell of burning unplug the machine from the mains supply immediately and contact the JURA service centre f the power cable for this machine is damaged it must be repaired either directly by JURA or by aJURA approved service centre Make sure that the ENA and the power cable are not located close to hot surfaces Be careful to ensure that the power cable does not become trapped and does not rub against sharp edges Never open and repair the machine yourself Do not modify the machine in any way that is not described in the ENA manual The machine contains live parts If opened there is a danger of fatal injury Repairs may only be carried out by JURA approved service centres using original spare parts and accessories There is a risk of scalds and burns from the spouts or the nozzle Place the machine out of the reach of children Do not touch any hot parts Use the handles provided Be careful to ensure that the appropriate nozzle is correctly installed and clean The nozzle or parts of the nozzle could become detached if the parts are not assembled correctly or a blockage occurs A defective machine is not safe and could cause injury or fire To avoid damage and any associated risk of injury or fire Never allow the p
39. team preparation 8 l Symbol description 7 Copyright System emptying 32 The Instructions for Use contain information T which is protected by copyright It is not permit ted to photocopy or translate these Instructions Technical data 32 Transport 32 for Use into another language without the express Troubleshooting 31 written consent of JURA Elektroapparate AG U JURA Elektroapparate AG Use proper D Kaffeeweltstrasse 10 Using for the first time P CH 4626 Niederbuchsiten www jura com
40. tering a default setting for the amount of water for acup size 1 A default setting can be entered for the amount of water for 1coffee When preparing 2 coffees this amount is dispensed per cup Precondition Fis appears on the display and the coffee spout is set at the 1cup position gt Place the cup under the coffee spout gt Press the Rotary Switch and hold it down During grinding the strength of the coffee is displayed gt Continue to hold the Rotary Switch down until ERGUGH COFFEE F appears The aes flows into the cup gt Press the Rotary Switch again when enough coffee has been filled into the cup me the default setting for the amount of water for one coffee has been entered i This setting can be changed at any time by repeating the above procedure Cappuccino with the Professional Cappuccino Frother Precondition EmEYY appears on the display and the coffee spout is set to the 1cup position gt Remove the protective cover from the Professional Cappuccino Frother gt Connect the milk pipe to the nozzle gt Insert the other end of the milk pipe into a milk carton or connect it to a milk container ENA 5 gt gt gt ot 6 gt D gt e Place a cup under the nozzle Set the selector lever of the nozzle to the milk foam position Turn the Rotary Switch until displayed Press me oa Switch TE as soon as the ENA is sificientiy heated Turn wu switch t
41. to start the coffee preparation mJ the pre set amount of water flows into the cup Preparation stops automati cally To ensure that the Easy Cappuccino Frother works perfectly it should be rinsed and cleaned regularly refer to Chapter 4 Maintenance Easy Cappuccino Frother Cappuccino with the 2 stage frothing nozzle Precondition REREYY appears on the display and i Q me the coffee spout is set at the 1cup position gt Push the 2 stage frothing nozzle to the lower position gt Place a cup of milk below the 2 stage frothing nozzle and immerse the nozzle in the milk a If the nozzle does not reach into the cup lift the cup towards the nozzle gt Turn the Rotary Switch until 2 PERF Is displayed SSESFaEYy appears as soon as the ENA is sufficiently heated gt Turn the switch to position df steam gt Turn the switch to position Y when the milk foam has reached the required consistency You can prepare more steam within about 40 seconds gt Place the cup under the coffee spout gt Press the Rotary Switch to start coffee preparation i LHS the pre set amount of water flows into the cup Preparation stops automati cally To ensure that the 2 stage frothing nozzle works perfectly it should be rinsed ENA 5 regularly refer to Chapter 4 Maintenance Dismantling and rinsing the 2 stage frothing nozzle Heating milk with the Professional Cappucci
42. turer may result in fire electric shock or injury to persons Do not use outdoors Do not let the cord hang over the edge of a table or counter or touch hot surfaces Do not place on or near a hot gas or electric burner or in a heated oven Always attach plug to appliance first then plug cord into the wall outlet To disconnect turn any control to OFF then remove plug from wall outlet Do not use appliance for other than intended use Use extreme caution when dispensing hot steam For household use only SAVE THESE INSTRUCTIONS 2 ENA 5 Special cord set instructions a Ashort power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord Your ENA has a 3 pin grounded plug b Longer extension cords are available and may be used if care is exercised in their use c If an extension cord is used 1 the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance and 2 if the appliance is of the grounded type the extension cord should be a grounding type 3 wire cord and 3 the longer cord shall be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children of tripped over As a safety feature this plug will fit in a polarized outlet only one way Ifthe plug does not fit fully in the outlet reverse the plug If it still does not fit contact
43. ust be instructed in how to use it correctly Safe handling of the CLARIS filter cartridges Filter cartridges should be kept out of the reach of children Store filter cartridges dry in the sealed package Protect filter cartridges from heat and direct sunlight Easy Cappuccino Frother Do NOT use damaged filter cartridges Cappuccino Do NOT open filter cartridges Welcome to the world of JURA JURA on the Internet Visit us on the Internet Atwww ura com you will find the latest interesting information about your ENA and 2 stage frothing nozzle all facets of the world of coffee Cappuccino Hot milk Knowledge Builder You can also get to know your ENA in a fun way on the PC The Knowledge Builder awaits you at www jura com LEO the interactive assistant will assist you and explain the benefits of ENA and how it is used ENA 5 Hot water nozzle 3 colour plain text display Your ENA features a 3 colour plain text display The colours of the display texts have the following meanings Green Your ENA is ready for use Red The ENA is prompting you to perform an action Yellow You are in programming mode 1 Preparing and using for the first time This chapter provides the information you need for trouble free use of your ENA and gives you a step by step guide to preparing your ENA for your first coffee experience Setting up When setting up your ENA please
Download Pdf Manuals
Related Search