Boss Audio Systems BV7325B car media receiver
Contents
1. 18 5 15 Playback the Picture CD in JPEG Format z418 5 16 Mp4 OPERATION 5 2 odani aiana iniae N dait tede 19 5 17 ESP aiid IDS F nGcllOl u ucietr enit iaeiae iniiae En N EE A 19 5 18 USB and MMC SD Reader Operation 19 5 19 DVD System Menu Setup Operation 19 5 20 Parental Control ssssss 223 CEA REGION COM EET MED DNENTIUR 24 6 Bluetooth Hand free System Option sess 25 VoM E reiUio etiolorifjo pee NR TS 27 8 SPECIICATIONS fem PT 28 By 1 2 1 Before Operation 1 1 Glossary PBC playback control It is a kind of signal menu recorded in the disc with SVCD or VCD2 0 format used for the playback control For the discs containing PBC It can playback interactive software with the menu displayed on monitor And if the disc contain still images it can playback high definition of still images Title Generally the title is the important part of DVD disc for example the theme part of movie is title 1 the part described how to make movie is title 2 the cast is title 3 etc Every title contain a serial number that is easy to lookup Chapter Atitle can be divided into several blocks so that every block can be operated as aunit the unit is called chapter The chapter contain a unit at least Track It is the biggest component of VCD Generally every song of karaoke disc is a track PROTECTIVE CASE 2 Precautions ak O PDF created with FinePrint pdfFacto2. BLUETOOTH ENABPED IN DASH DVD MP3 CD AM FMARECEIVER WITH 3 2 8 1mm WIDESCREEN TFRMONITOR WITH DUAL FRONT AND REAR USB PORTS SD MEMORY CARD PORT AND FRONT PANEL AV INPUT 12 2011 5 BOSS Audio Systems M 3451 Lunar Court Oxnard CA 93030 iPod EEEUCTLIDEUEUCHUIUML registered in the LIE amd other countries 800 999 1236 User s Manual BLUETOOTH ENABLED IN DASH DVD MP3 CD AM FM RECEIVER WITH 3 2 81mm WIDESCREEN TFT MONITOR WITH DUAL FRONT AND REAR USB PORTS SD MEMORY CARD PORT AND FRONT PANEL AV INPUT rae 2103 Gai set N i aT 2 Fur Pe HOH EDI EE TERT EETI O IE AL ILL 1000r AUDIO SYSTEMS Kass Audio Sygbeeng is not aMfilisied weth Apple Inc PDF created with FinePrint pdfFactory trial version http www pdffactory com PRECAUTION WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE A RISK OF ELECTRIC SHOCK THIS APPLIANCE TO RAIN OR DO NOT OPEN MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightening flash with arrowhead symbol within an equilateral triangle is intended the alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute arisk of electric shock to persons The exclamation point
3. the TITLE PBC MENU buttons are disabled 4 7 Terminate the Playback 1 Press the EJECT button to slide down the front panel then the disc in the disc compartment will come out automatically and then remove the disc away 2 Long press the POWER button on the front panel or briefly press the POWER button on the remote control to turn off the DVD player 5 Advanced Disc USB or MMC SD Operation 5 1 Playback with Speed During normal playback long press the UP DN button on the front panel or the gt gt lt lt button on the remote control continuously to fast forwards or backwards at the following speeds x2 x4 x8 x20 normal During speed playback press the PLAY button to resume normal playback 5 2 Playback with Slow Speed During playback press the SLOW FWD button to execute the Slow Forward function With each consecutive pressing of the SLOW FWD button the playback speed decreases The speed levels in Slow Forward as follows X1 2 x1 3 x1 4 x1 5 x1 6 x1 7 normal During slow forward press the PLAY button to resume normal playback This function is only for video 5 3 Playback with still frame If the unitis currently playing DVD VCD disc press the STEP button consecutively to display the still frame forward with step by step Press the PLAY button to resume normal playback 5 4 Playback Repeatedly 5 4 1 ONE ALL Repeat 1 Inthe mode of DVD disc playback Press the RPT butto
4. then insert the USB storage or MMC SD Card first flip down the front panel and then the monitor will display the root menu of the USB storage or MMC SD Card All the operations are same as ones of the corresponding format When you want to pull out the card first push it and then pullit out Note This unit has front and rear USB Only one will work at a time 5 19 The DVD System Menu Setup Operation 1 Press the SETUP button on the remote control to access the DVD System Menu on the monitor There are 6 setup pages in all for the System Menu Press the or button to select a desired setup page Press the or v button to select an setup item in the selected setup page Press the button to enter the setup item Then press the v or button to selecta desired mode of the setup item finally press the OK button to confirm it Press the button to return to the upper level Press the SETUP button again or use the direction buttons to highlight the item of the EXIT SETUP and then press the OK button to exit the System Menu D AO 4 Basic Disc USB or MMC SD Operation 4 1 Begin playback 1 Press the POWER bution briefly to turn on the DVD player After turning on the DVD player please turn on the monitor and ensure that the video output of the monitor is the video input from the DVD player connected with the monitor Common Question Q There is not anything is displayed on TV scre
5. a certain rating level with SETUP MENU on screen If the rating level in the disc is higher than one set in the DVD player the DVD player can not playback the disc The rating level setup can be protected by the password Therein if you select Unlock the Parental Control function will be invalid and all level DVD rating will be played The disc movie can be designed as that the DVD player will playback the different version of content of a same movie according to the different rating level set by Parental Control Depending on the DVD feature of seamless switching described above the scenes that are not fitting for children will be cleared or replaced by the other fitting scene automatically All rating levels of Parental Control are as follows Unlock Kid Safe G PG PG 13 PGR R NC 17 Adult ONOoRWDY PDF created with FinePrint pdfFactory trial version http www pdffactory com 1 8 UNIT INSTALLATION INSTALLATION INSTRUCTIONS TO BOOST UP TH METALSTRAP S x 7 THE CAR e i DASH BOARD SLIDING METAL HOUSING TO DRAW THE CHASSIS OUT OF THE SLIDING METAL HOUSING INSERT THE LEFT AND RIGHTKEY PLATES INTOTHE TWO SIDES OF CHASSIS ANTI JAMMING PLEASE FIX THE METAL STRAP ON THE METAL CONNECTED TO THE CHASSIS OF THE UNIT INSTALLATION IS ANTI THEFT ONE THE UNIT CHASSIS WEARS ASLIDING METAL HOUSING FIRSTLY CONNECT THE POWER LINES SPEAKER LINES AND AUTO ANTENNA ACCORDING TO MANUAL
6. countries or areas represented by the region codes are as follows Region 1 America Canada East Pacific Inlands Region 2 Japan West Europe North Europe Egypt South Africa Middle East Region 3 South east Asian countries include Taiwan Hong Kong South Korea Thailand indonesia etc Region 4 Australia New Zealand Central South America South Pacific Inlands Region 5 Russia Mongolia Indian Peninsula Middle Asia East Europe North Korea North Africa North west Asia etc Region 6 China mainland 24 23 5 20 Parental Control Q Why after inserting DVD disc in the disc slot a dialogue window appears that asks to input a 4 digits password A This is because the movie you are playing was rated with the Parental Control and the current rating level of DVD player is lower than the current disc You must input right password and enter it to entry Parental Control setup menu and then set a equal or higher rating level than one of current disc So that you can playback the disc You must change the Parental Control setting to higher rating level NOTE Ifyou have not changed the password the factory preset password for the DVD player is 0000 To change the password you should input the current password and then input the new password 2 times Parental Control The Parental Control function of a DVD player can control the playback of movie rated level in a disc You can set the DVD player to be
7. gt o ox OF DISPLAY NO DISC OR BAD DISC Ensure that you have put the disc in the unit Check whether the disc is put in the reverse side Check whether the disc is distorted Check whether the disc is stained or scratched badly Ensure that the disc format is compatible to the player Ensure that the temperature inside the car is nottoo high If so cool off until the ambient temperature returns to normal Replace another disc to insert it into the disc compartment 0 0 XO REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK Checkthe batteries of remote control and make sure that they are powerful and have good conductivity Directthe remote control to the IR sensor of the player Check whether there are some obstacles between the remote control and IR sensor SOME FUNCTION BUTTONS DO NOT WORK Turn off the power then turn on again Reset the unit to zero then turn on again Remove the front panel from the unit then install it again and then turn on again THE RADIO DOES NOT WORK Check whether the antenna cable is connected firmly Or manually tune for a station PDF created with FinePrint pdfFactory trial version http www pdffactory com 1 3 Maintenance and Cleaning of Discs Disc Maintenance 1 To keep the disc clean handle the disc by its edge do not touch the disc surface of the play side 2 Do not stick paper or tape on the disc If there is anything on the disc surface wipe it up w
8. inputthe original password 0000 and then press the OK button to unlock it Press the button to enter it again then input a new password that you like and then press the OK button to make it effective Before the other persons see the Manual you should get the password in mind and cut out the part of PASSWORD in the Manual RATING This item is for setting a new rating level of the Parental Control 1 Select the PASSWORD item and then press the button to enter it then input the password mentioned above and then press the OK button to unlock the setting of the rating level of the Parental Control 2 Select the RATING item and then press the gt button to enter it then use the direction buttons to select your desired rating level then press the OK button to confirm 3 Select the PASSWORD item again and then press the button to enter it then input the password and then press the OK button to lock the new setting of the rating level of the Parental Control DEFAULT This item is for making all setup items change back to original status 19 PDF created with FinePrint pdfFactory trial version http www pdffactory com 3 During JPEG playback press one of the v buttons to change the angle of viewing picture that is displaying as follows gt 90 deg cw lt 90deg cew UP DOWN v LEFT RIGHT During JPEG playback press the PROG button to change the mode of refresh picture During JPEG playback
9. playback first press the STOP button then press the PLAY button to enter sequence playback or press the PROG button twice again To remove the all programmed sequence numbers move the cursor onto Clear item then press the OK button To change the programmed sequence move the cursor onto the item you want to change input the desired sequence number During VCD playback if it is in PBC ON mode at the same time of entering the state of program playback it turns off PBC mode 5 15 Playback the Picture CD in JPEG Format 1 The root menu is displayed on the monitor when beginning to switch on DISC mode At the time it plays MP3 WMA file the TITLE or MENU button is not available In the root menu the left file sort icon is for MP3 WMA file the middle file sort icon is for JPEG file the right file sort icon is for VIDEO file If one of these 3 file sort does not exist you cannot move cursor onto the file sort icon When displaying the root menu press the direction buttons to select your desired FOLDER file or file sort icon then press the OK or PLAY button to open the FOLDER or play the selected file or play only this sort of file When displaying the root menu you can also use the number buttons to select the serial number of the file and play the file When you select a JPEG file sort icon press the or button to select the first JPEG file then press the v button to select the desired JPEG file finally press
10. press the STOP button to stop playing and return to the root menu During JPEG playback the following buttons are not available SLOW FWD SUBTITLE TITLE ANGLE STEP AUDIO RDM INT and A B n JPEG mode the other operations are same as ones in MP3 WMA mode 5 16 MP4 Operation 1 The root menu will display on the monitor when it begins to switch to DISC mode then it will automatically play the first file During playback press the STOP button to stop playing and return to the root menu 2 When displaying the root menu press the direction buttons to select your desired FOLDER or file then press the OK or PLAY button to open the FOLDER or play the selected file When displaying the root menu youcan also use the number buttons to select the serial number of the file and play the file TheANGLE PROG RDM INT and TITLE PBC button are not valid in this mode The other functions are same as ones in DVD disc butthe RPT function is same as one in MP3 WMA 5 17 ESP and ID3 Function There is ESP function for all formats of discs In MP3 WMA mode during playback the information of the file name folder name songs title artist and album will be scrolling on the LCD display Aslong as the current playing MP3 music contains relevantID3 tag information in version 1 0 2 0 format the 3 items underlined above will be scrolling on the LCD display otherwise they will not 5 18 USB and MMC SD Reader Operation Power on the DVD player
11. right channels of signal when outputting audio signal with 2 channels it will output the common 2 channels of stereo signal VSS If you choose the item when playing a disc recorded with 5 1 channels the main channel speakers can output audio signal with VSS effect 5 19 6 DIGITAL SETUP DIGITAL SETUP OP MODE DYNAMIC RANGE DUAL MONO OP MODE Itis for selecting audio output mode LINE OUT It can linearly compress the audio signal So the volume level is lower RF REMOD It can make the volume level higher DYNAMIC RANGE After selecting the compression mode of LINE OUT set the item so you can adjust the linear compression ratio If you setitto be FULL the Peak to Peak value of the audio signal is the minimum if you setitto be OFF the Peak to Peak value is the maximum DUAL MONO Itis for selecting a desired audio output mode for the left and right ways of signal There are 4 modes in all as follows STEREO MONOL MONO R MIX MONO 22 21 5 19 2 LANGUAGE SETUP LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG OSD LANGUAGE This item is for selecting the language of the SYSTEM MENU and all operating prompt interface displayed during playback AUDIO LANG This item is for selecting a audio language SUBTITLE LANG This item is for selecting a subtitle language MENU LANG This item is for selecting a disc menu language 5 19 3 AUDIO SETUP AUDIO SETUP AUDIO OUT KE
12. ringing the phone number appears 6 Dialling or receiving call at unit sleep mode When the car audio at sleep mode Acc on and standby to execute a dialling with mobile phone or there comes a call the car audio will temporarily woke up 7 To transfer the audio of a file played by Mobile Phone to the Car Audio Player In the connection status between the Bluetooth devices of the Car Audio Player and a Mobile Phone if the mobile phone can play audio or video files and support A2DP when the Mobile Phone plays an audio or video file For some Mobile Phones you must select Play by BT firstly the audio of the playing file will be transferred to the Car Audio Player In A2DP mode if the Bluetooth device of the Mobile Phone support AVRCP the functions of the gt gt lt lt PLAY PAUSE EJECT MUTE EQ LOUD VOL and SEL buttons are the same as one in disc mode no fast forward backward functions for the gt gt lt lt buttons The other buttons available in disc mode are not available 25 6 BLUETOOTH HANDFREE SYSTEM Option 1 Pairing and connection 1 Turn on the Bluetooth mode of the mobile phone 2 Select the item of Finding the BLUETOOTH Device and press enter Once the device and unit are paired the unit will display the name of the device Select the device and press enter and the unit will ask for a password which is 0000 After entering 0000 press enter and after the pairing is complete the unit will d
13. the OK or PLAY PAUSE button to display the JPEG picture in full screen from the selected JPEG picture 17 PDF created with FinePrint pdfFactory trial version http www pdffactory com ZOOMx2 ZOOMx3 ZOOMx4 ZOOMx1 2 ZOOMx1 3 ZOOMx1 4 ZOOM OFF Press one of the v 2 buttons to select the area you want to enlarge 5 10 Change the Caption Language When playing a DVD disc press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption depend on the current disc When playing a VCD MP3 WMA CD disc the button is not available 5 11 Change the Audio Language 1 When playing a DVD disc press the AUDIO button repeatedly on the remote control to select the desired language type depend on the current disc 2 When playing a VCD disc press the AUDIO button repeatedly to select the sound mode of the MONO L MONO R MIX MONO and Stereo no language function 3 When playing a CD WMA MP3 disc the AUDIO button is disabled 5 12 Change the Video Signal System During playback of DVD VCD disc press the BAND P N button on the front panel or on the remote control repeatedly to change the VIDEO SIGNAL SYSTEM mode 5 13 Look overthe Playback Status 1 When playing a DVD disc press the OSD button repeatedly on the remote control to turn on off the playback status When itis on it will display the information such as the serial number of the playing title the serial number of the play
14. tuning press this button to turn on the LOC function to display the word LOC on LCD then tune again for the local radio station PDF created with FinePrint pdfFactory trial version http www pdffactory com For the DVD System Menu there are 6 setup pages in all They display as follows 5 19 1 SYSTEM SETUP SYSTEM SETUP TV SYSTEM TV TYPE PASSWORD RATING DEFAULT TV SYSTEM This product supports output of various TV systems If your monitor has only NTSC or PAL system the screen will blink and become colorless when a wrong TV system is selected In this case press the N P button to switch the right TV system to match the TV color system TV TYPE The setup item is for matching screen size 4 3 PS Choose the item when connecting a TV set with 4 3 screen When playing the pictures with 16 9 size the left and right parts ofthe video will be cut out and display in full screen 4 3 LB Choose the item when connecting a TV set with 4 3 screen When playing the pictures with 16 9 size the top and bottom parts of the TV screen will be turned into a black square respectively 16 9 Choose the item when connecting a TV set with 16 9 wide screen PASSWORD This setup item is for locking or unlocking the rating level of the Parental Control The defaulted state is locked The defaulted password is 0000 You can set a new password that you like Select the PASSWORD item and then press the button to enter it then
15. DF created with FinePrint pdfFactory trial version http www pdffactory com 1 6 Description of the Face of the Front Panel 10 1484 9 12 13 14 6 23 15 6 17022 21 The figure of the front panel The figure of the Unit Chassis Facet After removing the Front Panel POWER MUTE BUTTON DISC SLOT RELEASE BUTTON MODE AV IN SOCKET SELBUTTON AND VOL KNOB 7 SMALL MONITOR 8 IR REMOTE SENSOR 9 BAND TEL BUTTON 10 UPAND DN BUTTONS 11 EJECT BUTTON 12 1 PLAY PAUSE BUTTON 13 14 15 16 17 18 19 20 21 22 23 24 25 2 INT BUTTON 3 RPT BUTTON 4 RDM BUTTON 5 10 BUTTON 6 10 BUTTON USB SOCKET RESET BUTTON APS HANG UP BUTTON EQ BUTTON CLK BUTTON MICROPHONE CARD SLOT LED Indicator Parking Line GREEN ANN 1 7 Description of the Rear Cabinet GREEN e GREY SUBWOOFER RED R RED R BLACK REAR RCA LINE OUT FRONT RCA LINE OUT WHITE L GREY Fixing Screw Bolt WHITE L BT Antenna Reversal line White BLACK YELLOW AM FM Antenna ido d USB LINE IN elec Nj YELLOW Fixed ISO Female Connector Rear View Camera GRAY Note 1 Parking wire must be connected and the parking brake must be engaged in orderfor the monitor to work 2 Use the clip end of the Ground wire provid
16. REQUIREMENT THEN INSTALL THE SLIDING METAL HOUSING IN ACAR ACCORDING TO THE DIAGRAM E CAPABILITY OF SELECT THE PROPER TABS OF THE SLIDING METAL HOUSING TO FIX THE SLIDING METAL HOUSING UNIT CHASSIS PLASTIC TRIM OUT FRONT PANEL NOTE REMOVE THE SLIDING METAL HOUSING REMOVE THE DECK TRANSPORT SCREWS BEFORE INSTALLING IT EJECT BUTTON RESET BUTTON Aoo 2 Common Operation 1 To turn on off the unit Under power off mode press the POWER button to turn on the unit Under power on mode long press the POWER button on the front panel or briefly press the POWER button on the remote control to turn off the unit To select function mode and switch on off TFT screen Press the MODE button to select TUNER DISC After inserting a disc USB After inserting a USB storage Card After inserting a MMC or SD card or AUX mode Long press MODE button to switch off the TFT screen when driving on night time Then press one of any buttons to resume it Note This unit has front and rear USB Only one will work at a time To adjust sound level Rotate the VOL knob on the front panel or press or hold the or button on the remote control to directly adjust the volume level To mute sound Press the MUTE button on the remote control to turn on off MUTE mode Briefly pressing the POWER button on the front panel also can turn on off MUTE mode In MUTE mode the MUTE mode can b
17. SEARCH button to display a interface and highlight the title item then use the number buttons to input the serial number of the title use the direction buttons to highlight the chapter item then use the number buttons to input the serial number of the chapter you can still use the direction buttons to highlight the time item then use the number buttons to input the desired time to start playback finally press the OK or PLAY button to play the selected chapter or play from the selected time 2 When playing a VCD MP3 WMA CD disc press the SEARCH button to display a interface and highlight the track item then use the number buttons to input the serial number of the track you can still use the direction buttons to highlight the time item then use the number buttons to input the desired time to start playback finally press the OK or PLAY button to play the selected track or play from the selected time 5 7 Playback in Random When playing DVD VCD PBC OFF MP3 WMA CD disc press the RDM button to switch between RANDOM ON RANDOM OFF When in RANDOM ON mode it will play in random 5 8 Playback in Different Angle 1 When playing a VCD MP3 WMA CD disc the ANGLE button on the remote control is not available 2 When playing a DVD disc press the ANGLE button repeatedly on the remote control to view in different angle This function is only for the DVD discs with ANGLE function 5 9 Playback in Zoom Mode In DVD VCD
18. Y AUDIO OUT there is only ANALOG mode i e SPDIF OFF not optional KEY Itis for selecting your desired basic music tone from low to high 5 19 4 VIDEO SETUP VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION SHARPNESS BRIGHTNESS Itis for adjusting the brightness of the video output CONTRAST Itis for adjusting the contrast of the video output PDF created with FinePrint pdfFactory trial version http www pdffactory com 10 7 To demount the front panel 1 Press the RELEASE button on the front panel to detach the front panel from the unit see fig 1 2 Flip down the front panel see fig 2 3 Hold the right end of the front panel and pull out the right end as arrow direc tion then pull out the whole front panel as arrow direction see fig 3 Fig 1 8 To mountthe front panel 1 Insert left end of the front panel first as arrow direction then push and hook up the right end of the front panel onto the unit see fig 4 2 Flip the front panel upward till hearing a clip see fig 5 and fig 6 SS PORTA Fig 4 Fig 5 9 To turn on off LOUD mode Press the LOUD button on the remote control to turn on off LOUD mode When turning on LOUD mode it will enhance bass level immediately when the bass is not enough 10 To reset the unit when the display is wrong or the function buttons are not effective or sound is distorted press the RELEASE button to detach the front panel from th
19. ause electric shock NO PICTURE SOUND AND INDICATION Ensure that the power switch is on Ensure that the power cord is not damaged or the fuse is not blown Ensurethat the power plug is connected to the inlet tightly NO SOUND BUT HAVE PICTURE Ensurethatthe player s audio output has a good connection with amplifier Check whether the audio connector is damaged Check whether you have turned down the volume Ensure that you have set the right AUDIO setup of the player Ensure that the audio is not muted NO PICTURE BUT HAVE SOUND Ensure thatthe players video output has a good connection with monitor s video input Ensure that you have turned your TV to the AV input channel connecting to your player Check whether the video connector is damaged Ensure that you have set the right VIDEO settings of the player Check that parking brake wire is connected to parking brake switch such that wire is grounded when parking brake is applied o BLACKAND WHITE PICTURE OR SCREEN ROLLING Ensure that you have set the right TV SYSTEM e g PAL NTSC setting FLAWS OF PICTURE OR SOUND Check whether the setting of AUDIO is right Check whether the disc is scratched or stained Check whether the AV connector and the output terminal is stained Check whether there is condensation inside the Lens If so leave the player off for an hour or so then try again Check whether the installation angle is less than 30
20. cr pinnin i Simi p ore bauen ie duke E 24 bit 96KHz Loading SySteM s rcr iran siie inne ana aas eee Auto Loading Mounting ANG Ereinen niiina iN 0 to 30 Video Specification Video Typen tm 16 9 and 4 3 Video Output level sese Composite 1 0 0 2Vp p Load impedance 75 ohms Horizontal ReESOIUtION ccc cece cece cece eee ee eect eee eeeeeeeeaeeeeeeeeaees 500 Audio Specification Audio Output Analog aUudio cccccccccccccceceeessetssteeeees 2 0 1 0Vrms Frequency Response ueesess 20Hz 20KHz at 1KHz 0 dB S N Ratio Audio sse 90dB at 1KHz 0 dB Separation scera en i cre sods ad anes ERE M EORUM MADE ERE LER EDESA 50dB Radio Specification FM Section Frequency FangGe eceeeeeeeeeeeeeeeneeeeceeeeeeees 87 5MHz 107 9MHz Usable sernsitiVity cioe meer kbmt mc sect experte a A aei 3uV IF Freg ercy uer retentu to rese eee E Rb Haden de 10 7MHz AM Section FIC QUGNICY e 530KHz 1710KHz 28 27 7 Trouble Shooting Please read the user manual carefully before using the DVD player If you have any trouble using this player try to solve the problems by the suggestions mentioned below If you can not remove the trouble after using all the suggestions please contact the company orthe technical service center authorized by us Forthe sake of your safety please do not open the cover and repair the player by yourself if that it may c
21. e unit then use a needle analogue to press the RESET button to rehabilitate the distorted program to zero 11 To adjust the sound equalizer curves To adjust the sound equalizer curves briefly and repeatedly press the SEL button to select the sound equalizer curves of VOL BAS without preset EQ TRE without preset EQ BAL FAD then rotate the VOL knob on the front panel or press the or button to adjust level 11 3 Radio Operation 1 BAND BUTTON In RADIO mode press the BAND button on the remote control or on the front panel to select your desired radio band of FM1 FM2 FM3 AM1 and AM2 and the word means which band is selected will be displayed on the small monitor of the front panel 2 TUNE SEEK UP DOWN BUTTONS In RADIO mode 1 Long press the UP DN button on the front panel or the gt gt lt lt button on the remote control to automatically search up down for a available station from the current frequency 2 Briefly press the UP DN button on the front panel or the gt gt lt lt button on the remote control to manually search up or down with step by step for your desired station from the current frequency 3 APS BUTTON In RADIO mode 1 When long pressing the APS button the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished And then the 6 strongest stations are preset to the corresponding preset number memory bank The AS operation is implement
22. e TITLE button on the remote control to display the title list 2 Pressthe direction buttons to select your desired title and then press the OK or PLAY button to open the root menu of the selected title 3 Pressthe direction buttons to select your desired chapter finally press the OK or PLAY button to play the selected chapter During playback pressing the MENU button can directly display the root menu of the title that is playing PDF created with FinePrint pdfFactory trial version http www pdffactory com It allows you to enter the order in which you want some chapters tracks in DVD VCD MP3 WMA CD disc to play During playback press the PROG button to enter a program interface as follows for DVD discs for VCD MP3 WMA CD discs PROGRAM PROGRAM T C T C T C T C d Sas gt ee aac ood oq 39 5 ul Wo EP DENM NENNEN On th 518 a 2 a T0 14 Sero dl 5 45 1 go o d scd 5 4 8 412 M6 4 8 12 16 Play Clear Play Clear Use the direction buttons to move cursor onto the desired place for inputting the sequence number Use the number button to input desired sequence number of title chapter track with desired sequence Use the direction button to move cursor onto Play item then press the OK button to play the programmed titles chapters tracks in programmed order only pressing the PLAY button also can play the programmed titles chapters tracks in programmed order To exit program
23. e playback then press the PLAY button to resume the normal playback press the STOP button twice to full stop the playback then press the PLAY button to start playback from the beginning of the first chapter track 4 4 Select Chapter Track with the UP DN or the lt lt Button Press the UP DN button on the front panel or the gt gt lt lt button on the remote control during playback to select the next or last chapter track to playback Note Press the UP DN or the gt gt lt lt button multiple times to advance multiple chapters tracks forward or backward 4 5 Select Chapter Track with the Number Buttons In the state of DVD VCD PBC OFF MP3 WMA CD disc playing press one ofthe 1 9 and the 0 10 number buttons to directly select and play the 1stto 10th track chapter the 0 10 button is used as the 10 button If you wantto play the track chapter that s serial number is bigger than 10 use the 10 1 9 and 0 10 button For example 1 to play the 13th track chapter firstly press the 10 button once then press the 3 button For example 2 to play the 34th track chapter firstly press the 10 button for 3 times then press the 4 button the 0 10 button is used as the 0 button Note long pressing the 10 or 10 button can play the next 10 or last 10 chapter track only for MPS WMA 4 6 Select Chapter Track with the Root PBC Menu If the disc includes the root PBC menu In the state of DVD disc playing 1 Pressth
24. e released by pressing the following buttons MUTE VOL or SEL MODE To display and adjust the clock time Press the CLK button to display clock time on the small monitor of the front panel Then long press the CLK button to change the color of the hour of the clock then rotate the VOL knob on the front panel or press the or button on the remote control to adjust the hour and then briefly press the SEL button to change the color of the minute of the clock then rotate the VOL knob on the front panel or press the or button on the remote control to adjust the minute To select a preset EQ mode Press the EQ button to select the preset music equalizer curves POP ROCK CLAS FLAT The sound effect will be changed PDF created with FinePrint pdfFactory trial version http www pdffactory com HUE It is for adjusting the hue of the video output SATURATION Itis for adjusting the saturation of the video output SHARPNESS It is for adjusting the sharpness of the video output 5 19 5 SPEAKER SETUP SPEAKER SETUP DOWNMIX DOWNMIX Itis for selecting your desired sound effect when there is not central speaker and sub woofer There are 3 mode LT RT STEREO VSS LT RT When playing a disc with PRO LOGIC Dolby stereo effect choose the item so it will output audio signal with vivid theatre effect STEREO If you choose the item when outputting audio signal with 5 1 channels it will output the left and
25. ed by manufacturer to connect Mounting Screw use the other end of the Ground wire to connectthe negative pole of the power source Otherwise the video on screen may flaches Connecting the parking brake line to the parking brake system built in the car Parking brake ZEN x Parking brake switch inside the car Parking brake wires Green To metallic body or chassis of the car The Description of the Fixed ISO Female Connector A 4 s s 7 B Va 2 4 e lea c m 1 B 5 hbk b rl j 2 4 le l i CONNECTOR A CONNECTOR B 1 Rear Right Speaker 2 2 Rear Right Speaker 3 3 Front Right Speaker 4 Memory 12V yellow 4 Front Right Speaker 5 Auto Antenna blue 5 Front Left Speaker 4 6 6 Front Left Speaker 7 12V To Ignition Key red 7 Rear Left Speaker 4 8 GROUND black 8 Rear Left Speaker PDF created with FinePrint pdfFactory trial version http www pdffactory com 5 21 The Region Code Why does the unit display REGION ERROR after inserting disc into disc compartment Because the DVD player and disc has respective region code If the region codes of them do not match with each other the DVD player can not play the disc Appendix The region code of DVD The Motion Picture Association of America MPAA divided the world into 6 regions and gave every region a code namely region code The region codes and the
26. ed in the each bank of the selected band When the AS operation is finished it will resume broad casting on the M1 It can store 3x6 stations for FM and 2x6 stations for AM in all 2 When briefly pressing the APS button the radio searches for each preset station from the M1 When the field strength level is more than the threshold level of the stop level the radio is holding at that preset number for few seconds with releasing mute and then searches again After finishing a circle of searching it will stop searching on the M1 NOTE In FM band FM1 FM2 FMG is checked one at a time In AM band AM1 AM2 is checked one at a time 4 PRESET STATION 1 6 BUTTONS In RADIO mode 1 To memorize the current frequency on the current band long press any one of the six preset buttons 1 6 2 To recall the preset memory on the current band press one of the preset buttons 1 6 5 STEREO MONO BUTTON Press the ST button on the remote control to select the STEREO or MONO sound mode for FM band 6 LOC BUTTON 1 In RADIO mode when the signal of the distance radio station are very weak and the receiving effect is bad during tuning check whether there is the word LOC on LCD If there is the word LOC on LCD press this button to turn off the LOC function then tune again for the distance radio station 2 In RADIO mode when the signal of the local radio station are too strong to lead that the interference to the receiving effect during
27. en when the DVD player is turned on How to solve the problem A Ensure thatthe TV was set to right video input not TV channel for example if you make VIDEO1 INPUT of TV and DVD player connected with each other then you need set TV to VIDEO1 2 Press the RELEASE button to detach the front panel from the unit 3 Insert a disc into the DISC SLOT Label surface up then flip up the front panel till hearing a clip NOTE 1 Forsome discs that are seriously scratched or poor manufacturing or recording quality it may not play 2 If the player can notread disc under normal condition please try to eject and reload the disc again 3 Remark 1 In addition to normal CD and DVD this unit supports to play CD R CD R W DVD R and DVD R W as well however depending on the conditions of the recording equipment recording program or the disc itself some CD R CD R W DVD R or DVD R W may not play 2 When dealing with CD R CD R W DVD R or DVD R W recording too high recording speed may result in poor signal quality and therefore itis recommendable to select as lower as possible recording speed 12 13 5 14 Program Playback 4 2 Pause Playback In the state of DVD VCD CD MP3 WMaA disc playing press the PAUSE button on IR remote control to pause the playback press the PLAY button to resume normal playback 4 3 Stop Playback In the state of DVD VCD MP3 WMA CD disc playing press the STOP button once to pause th
28. ing chapter the elapsed time of the playing chapter the remained time of the playing chapter the elapsed time of the playing title the remained time of the playing title etc 2 When playing a VCD CD disc press the OSD button repeatedly on the remote control to turn on off the playback status When itis on it will display the information such as the serial number of the playing track the elapsed time of the playing track the remained time of the playing track the elapsted time of the disc the remained time of the disc 3 When playing a MP3 WMA disc press the OSD button repeatedly on the remote control to turn on off the playback status When it is on it will display the information such as the serial number of the playing track the elapsed time of the playing track the remained time of the playing track 14 In VCD mode 1 When starting to turn on the PBC function it will play from the beginning of the disc till it display the PBC menu on monitor screen if the disc include the PBC menu 2 Press the number buttons to select your desired track to play In MP3 WMA mode 1 The root menu is displayed on the monitor screen all the time and the TITLE or MENU button is not available 2 Pressthe direction buttons to select your desired FOLDER then press the OK or PLAY button to open the FOLDER and then press the direction buttons to select your desired file finally press the OK button to play the selected file In CD mode
29. isplay Pairing is OK 3 For some mobile phones they can automatically connect with the BT device of the car audio system after pairing is ok for some mobile phones they need to select the paired BT device and press the CONNECTION button When connection is ok the LCD of the car audio system will show LINK OK when pairing is failed long press the MODE button on the front panel or PAIR button on the remote control to enter pairing mode then the LCD will display PAIR STAR then pair and connect with mobile phone again In Disc mode press and hold the PAIR button for 3 seconds to enter Pairing mode 2 Using the mobile phone for connecting and disconnecting In the connection status find the paired and connected Bluetooth Device then press the disconnection button to disconnect In the disconnection status find the paired and disconnected Bluetooth Device then press the connection button to connect 3 In the connection status Mobile phone transfers to the car audio whenever a dialling takes place Mobile phone transfers to the car audio whenever receiving a call 4 Dialling when in connection status 4 1 Dial with the mobile phone directly 4 2 Dial with remote control with the following procedures 1 Short press TEL button then a line will appear on LCD 2 Input telephone number with number buttons 0 9 Short press CLEAR button to cancel the wrongly input number if necessary 3 Short press TEL to execute the dialling P
30. ith a soft cloth before using 3 Do not expose the disc to direct sunlight or nearby heat sources such as caliduct or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature 4 Put the disc inside disc case to keep temperature after finishing playback Disc Cleaning 1 Before playing wipe the disc with a clean cloth wipe the disc outwards from the disc center 2 Do not use petrol thinner commercial cleaner or anti static spray used for plastic LP to wipe disc Le MEN EJ co rre ct wrong 2 N 1 4 Battery Information of the Remote Control Replace Battery in the Remote Control 1 Before using the remote control for the first time pull the insulating sheet out of the remote control as the direction indicated by the arrow see fig 1 2 Press the movable block hold as the direction indicated by the A arrow See fig 2 then pull the battery holder out of the remote control as the direction indicated by the B arrow see fig 2 3 Replace the old battery by a new battery with polarity side upward See fig 3 4 Insert the battery holder to the original position in remote control See fig 3 Note about the Battery of the Remote Control 1 Improper use of battery may cause overheating or explosion and could result in injury or fire 2 Battery leakage may cause damage to the remote control Battery Life 6 months with normal use in normal room temperature 3 Do not
31. mode during playback press the ZOOM button continuously to enlarge a certain area of the images on the screen with these multiples
32. n to select REP CHAPTER REP TITLE REPALL or REP OFF 2 Inthe mode of VCD PBC OFF CD disc playback press the RPT button to select REP ONE REP ALL or OFF When it is in the state of PBC ON during VCD disc playing the RPT button are not available 3 Inthe mode of MP3 WMA disc playback Press the RPT button to select REP ONE REP DIR REP ALL or OFF 5 4 2 A B Repeat Press the A B button if you want to repeat a specific segment on a disc that you define 1 Pressthe A B button at a point A where you wantit to be the start point of the repeat segment Press the A B button again at a point B where you want it to be the terminal point of the repeat segment Then it will play the segment repeatedly 2 Tocancelthe A B repeat mode and resume normal playback press the A B button for the third time Note During VCD MP3 WMA CD playback points A and B must be within the same track During DVD playback points A and B can be selected from different chapters PDF created with FinePrint pdfFactory trial version http www pdffactory com 16 5 5 Playback in Scan Mode 1 When playing a VCD PBC OFF CD disc press the INT button to play the previous 15 seconds part of each track on the disc Press the INT button again to resume normal playback 2 When playing a DVD MP3 WMA disc the INT button is not available 5 6 Playback from a specified chapter track or a specified time 1 When playing a DVD disc press the
33. r Cabinet m 1 8 UnitnstallatiOn icto eite ii tete teer oes edente E EAEE 8 2 COMMON Operation escis de ded oaa a inden bd A OR o lude dte 9 3 RAdlO OperatiOMs neni p 11 4 Basic Disc USB or MMC SD Operation ssssssse e 12 4 1 Begin Playback i 4 2 Pause Playback xd LEE dte c EDT ul 4 4 Select Chapter Track with the UP DN or the gt gt lt lt Buttons 18 4 5 Select Chapter Track with the Number Buttons sssseeeeeee 13 4 6 Select Chapter Track with the Root PBC Menu cc HR 13 4 7 Terminate the PlaybaCk aee e retentis ernannte 14 5 Advanced Disc USB or MMC SD Operation sessssssse 14 5 1 Playback with Speed 14 5 2 Playback with Slow opeen 14 5 3 Playback with still frame maD 5 4 Playback Repeatedly wil 5 4 1 One All Repeat 215 5 4 2 A B Repeat i545 5 5 Playback in Scan Mode ssssssssss e 3 16 5 6 Playback from a specified Chapter Track or a Specified Time 16 5 7 Playback imBandgoim cent tients ere ege aaiae d daada toss ae bemus el teas 16 5 8 Playback in Different Angle ssssssssesssss Hem 16 5 9 Playback in Zoom Mode 16 5 10 Change the Caption Language 17 5 11 Change the Audio Language 217 5 12 Change the Video Signal System 17 5 13 Look over the Playback Status wil 5 14 Program Playback cc cece
34. ry trial version http www pdffactory com Safety FRONT PANEL Power Source The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit The unit is designed for negative terminal of the battery which is connected to the vehicle metal Please confirm it before installation Do not allow the speaker wires to be shorted together when the unit is switched on Otherwise it may overload or burn out the power amplifier Do not install the detachable panel before connecting the wire The protective case is to safely keep the front panel see the photo Environment Do not use this unit when water and moisture is near it If moisture forms inside the Lens it may not operate properly To correct this problem wait about one hour for the moisture to evaporate If the car interior is extremely hot do not use the player until the car has been driven for a while to cool off the interior 8 Specifications General Specification Power Supply Requirement cceeeceeeneeeeeeeeeeeeeeeeaeeaeeeees DC 12V Maximum Power Output 4 x 80W measured at DC 14 4 V Dimensions w xh x esee 7Wx2 Hx6 5 D DVD Deck Specification FOtfnabustesssesecra eben iM DVD VCD JPEG MP4 AVI ASF WMV MPEG 1 MPEG 2 MPEG 4 MP3 WMA CD Video System NTSC PAL PAL M PAL N AUTO optional Audio SYSTEM cuisse etue
35. short the battery 4 Do not throw the battery into fire 5 To avoid the risk of accident keep the battery out of reach of children 1 5 The Remote Control Description hd 16 17 18 19 20 21 22 23 24 25 26 27 PDF created with FinePrint pdfFactory trial version http www pdffactory com Tt Q SEARCH BUTTON RDM BUTTON RPT BUTTON SUBTITLE REDIAL BUTTON TITLE PBC PAIR BUTTON ANGLE ST BUTTON ZOOM BUTTON AUDIO BUTTON CLK BUTTON A B BUTTON INT BUTTON EQ BUTTON 1 P N BUTTON 2 MENU BUTTON 3 POWER BUTTON 4 BUTTON 5 gt gt BUTTON 6 gt BUTTON 7 lt lt CLEAR BUTTON 8 v BUTTON 9 SELBUTTON 10 PLAY PAUSE BUTTON 11 NUMBER 0 10 10 10 BUTTONS 12 10 BUTTON 13 SETUP BUTTON 14 MODE BUTTON 15 APS HANG UP BUTTON 28 LOC SLOW FWD BUTTON 29 MUTE BUTTON 30 STOP BUTTON 31 VOLUME BUTTON 32 lt BUTTON 33 OK BUTTON 34 VOLUME BUTTON 35 BAND BUTTON 36 PROG BUTTON 37 OSD BUTTON 38 LOUD BUTTON 39 TELBUTTON 4 3 To redial the last phone number dialled 1 Short press TEL button It will show a line on LCD 2 Short press REDIAL button It will dial the last phone number 5 Accept Reject End Call 5 1 During ringing short press TEL button to accept the call 5 2 During ringing short press HANG UP button to reject the call 5 3 During talking short press HANG UP button to end the call Note During
36. within an equilateral triangle is intended to alert user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CLASS1 LASER PRODUCT Laser product symbol located on the rear panel of the unit indicate this player is a class laser product only use weak laser and no hazardous radiation outside of the unit 1 Read through this instruction manual before installation and use 2 Before removing the unit remove the disc from the unit first 3 Do not open the cover ortouch any ofthe components exposed out of the unit only for qualified technicians 4 Do not expose the unit to direct sunlight or nearby objects that radiate heat to avoid damage the unit 5 Do not place the unit in moist and humid conditions 6 Please ensure the ventilation holes are not covered to avoid overheating and malfunction 7 Clear the panel and case with soft dry cloth only do not apply any kind of thinner alcohol or sprays PDF created with FinePrint pdfFactory trial version http www pdffactory com Contents 1 Before Operati Masserie 3 CDCrrie e T EE SE EAE EE E E 3 3 PRS CAUTIONS H H B 1 1 1 2 1 8 Maintenance and Cleaning of Discs 4 1 4 Battery Information of the Remote Control E 1 5 The Remote Control Description D 1 6 Description ofthe Face of the Front Panel 6 1 7 Description of the Rea
Download Pdf Manuals
Related Search