Boss Audio Systems BV7320 car media receiver
Contents
1. 3 Insert a disc into the DISC SLOT Label surface up then flip up the front panel till hearing a clip NOTE 1 Discs that are scratched poorly manufactured or recorded in low quality may not play 2 Ifthe player cannot read disc under normal condition please try to eject and reload the disc again 3 Remark 1 In addition to normal CD and DVD this unit supports to play CD R CD R W DVD R and DVD R W as well however depending on the conditions of the recording equipment recording program or the disc itself some CD R CD R W DVD R or DVD R W may not play 2 When dealing with CD R CD R W DVD R or DVD R W recording too high speed recording may result in poor signal quality and therefore we recommend selecting the lowest recording speed as possible PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com ZOOMx2 ZOOMx3 ZOOMx4 ZOOMx1 2 Z00OMx1 3 Z0OMx1 4 ZOOM OFF Press one of the v gt lt buttons to select the area you want to enlarge 5 10 Change the Caption Language When playing a DVD disc press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption depend on the current disc When playing a VCD MP3 WMA CD disc the button is not available 5 11 Change the Audio Language 1 When playing a DVD disc press the AUDIO button repeatedly on the remote control to select the desired language type depend on the current disc 2 When pla2. At the time it plays MP3 WMA file the TITLE or MENU button is not available In the root menu the left file sort icon is for MP3 WMaA file the middle file sort icon is for JPEG file the right file sort icon is for VIDEO file If one of these 3 file sort does not exist you cannot move cursor onto the file sort icon 2 When displaying the root menu press the direction buttons to select your desired FOLDER file or file sort icon then press the OK or PLAY button to open the FOLDER or play the selected file or play only this sort of file When displaying the root menu you can also use the number buttons to select the serial number of the file and play the file When you select a JPEG file sort icon press the or gt button to select the first JPEG file then press the v button to select the desired JPEG file finally press the OK or PLAY PAUSE button to display the JPEG picture in full screen from the selected JPEG picture 3 Radio Operation 1 BAND BUTTON In RADIO mode press the BAND button on the remote control or on the front panel to select your desired radio band of FM1 FM2 FM3 AM1 and Am2 then the selected BAND will be displayed on the front panel monitor 2 TUNE SEEK UP DOWN BUTTONS In RADIO mode 1 Long press the UP DN button on the front panel or the gt gt lt lt button on the remote control to automatically search up down for a available station from the current frequency 2 Briefly press the UP DN butt
3. EUECTEULTON Itis for adjusting the contrast of the video output RESET BUTTON PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com 2 For the DVD System Menu there are 6 setup pages in all They display as follows 5 19 1 SYSTEM SETUP SYSTEM SETUP TV SYSTEM TV TYPE PASSWORD RATING DEFAULT TVSYSTEM This product supports output of various TV systems If your monitor has only NTSC or PAL system the screen will blink and become colorless when a wrong TV system is selected In this case press the N P button to switch the right TV system to match the TV color system TV TYPE The setup item is for matching screen size 4 3 PS Choose the item when connecting a TV set with 4 3 screen When playing the pictures with 16 9 size the left and right parts of the video will be cut out and display in full screen 4 3 LB Choose the item when connecting a TV set with 4 3 screen When playing the pictures with 16 9 size the top and bottom parts of the TV screen will be turned into a black square respectively 16 9 Choose the item when connecting a TV set with 16 9 wide screen PASSWORD This setup item is for locking or unlocking the rating level of the Parental Control The defaulted state is locked The defaulted password is 0000 You can set anew password that you like Select the PASSWORD item and then press the gt button to enter it then input the original password 0000
4. displaying as follows gt 90 deg cw lt 90deg cew UP lt gt DOWN v LEFT lt gt RIGHT During JPEG playback press the PROG button to change the mode of refresh picture During JPEG playback press the STOP button to stop playing and return to the root menu During JPEG playback the following buttons are not available SLOW FWD SUBTITLE TITLE ANGLE STEP AUDIO RDM INT and A B In JPEG mode the other operations are same as ones in MP3 WMA mode 16 MP4 Operation The root menu will display on the monitor when it begins to switch to DISC mode then it will automatically play the first file During playback press the STOP button to stop playing and return to the root menu When displaying the root menu press the direction buttons to select your desired FOLDER or file then press the OK or PLAY button to open the FOLDER or play the selected file When displaying the root menu you can also use the number buttons to select the serial number of the file and play the file The ANGLE PROG RDM INT and TITLE PBC button are not valid in this mode The other functions are same as ones in DVD disc but the RPT function is same as one in MP3 WMA 5 17 ESP and ID3 Function There is ESP function for all formats of discs In MP3 WMA mode during playback the information of the file name folder name songs title artist and album will be scrolling onthe LCD display As long as the current playing MP3 music contains rele
5. play 1 During playback press the PROG button to enter a program interface as follows for DVD discs for VCD MP3 WMA CD discs PROGRAM PROGRAM T C T C Ta T C Toata GON o aa aT Tana Fao Saa TS 2 6 TO E N E 2 66 10 a r NEE AENA ee ae Oy ee Same eae We a Oe Ae Be 3 VA MNES OS 4 Ben TA NO Play Clear Play Clear 2 Use the direction buttons to move cursor onto the desired place for inputting the sequence number 3 Use the number button to input desired sequence number of title chapter track with desired sequence 4 Use the direction button to move cursor onto Play item then press the OK button to play the programmed titles chapters tracks in programmed order only pressing the PLAY button also can play the programmed titles chapters tracks in programmed order To exit program playback first press the STOP button then press the PLAY button to enter sequence playback or press the PROG button twice again To remove the all programmed sequence numbers move the cursor onto Clear item then press the OK button To change the programmed sequence move the cursor onto the item you want to change input the desired sequence number During VCD playback if itis in PBC ON mode at the same time of entering the state of program playback it turns off PBC mode 5 15 Playback the Picture CD in JPEG Format 1 The root menu is displayed on the monitor when beginning to switch on DISC mode
6. selected chapter or play from the selected Press the UP DN button on the front panel or the gt gt lt lt button on the remote time control during playback to select the next or previous chapter track to playback 2 When playing a VCD MP3 WMA CD disc press the SEARCH button to Note Press the UP DN or the gt gt lt lt button multiple times to advance multiple display a interface and highlight the track item then use the number buttons chapters tracks forward or backward to input the serial number of the track you can still use the direction buttons to highlight the time item then use the number buttons to input the desired time to start playback finally press the OK or PLAY button to play the selected track or play from the selected time When playing a DVD VCD PBC OFF MP3 WMA CD disc press one of the 1 9 and the 0 10 number buttons on the remote control to directly select and play the 1st to 10th track chapter the 0 10 button is used as the 10 button 4 5 Select Chapter Track with the Number Buttons 5 7 Playback in Random If you want to play the track chapter that serial number is bigger than 10 use the When playing DVD VCD PBC OFF MP3 WMA CD disc press the RDM 10 1 9 and 0 10 button Example 1 to play the 13th track chapter first press button to switch between RANDOM ON RANDOM OFF When in RANDOM the 10 button once then press the 3 button Example 2 to play the 34th track ON mode it will play
7. CT o S 7 To remove the front panel 1 Press the RELEASE button on the front panel to flip down the front panel from the unit see fig 1 2 Flip down the front panel see fig 2 3 Hold the right end of the front panel and pull out the right end as arrow direc see fig 3 8 To mount the front panel 1 Insert left end of the front panel first as arrow direction then push and hook up the right end of the front panel onto the unit see fig 4 9 To turn on off LOUD mode Press the LOUD button on the remote control to turn on off LOUD mode When turning on LOUD mode it will enhance bass level immediately when the bass is not enough 10 To reset the unit When the display is distorted or the function buttons are not working correctly or sound is distorted press the RELEASE button to detach the front panel from the unit then use a needle object to press the RESET button to reset the unit to original setting 1 To adjust the sound equalizer curves To adjust the sound equalizer curves briefly and repeatedly press the SEL button to select the sound equalizer curves of VOL BAS without preset EQ TRE without preset EQ BAL FAD then rotate the VOL knob on the front panel or press the or button to adjust level PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com 3 During JPEG playback press one of the gt lt v buttons to change the angle of viewing picture that is
8. ND Ensure that the player s video output has a good connection with monitor s video input Ensure that you have turned your TV to the AV input channel connecting to your player Check whether the video connector is damaged Ensure that you have set the right VIDEO settings of the player BLACK AND WHITE PICTURE OR SCREEN ROLLING Ensure that you have set the right TV SYSTEM e g PAL NTSC setting FLAWS OF PICTURE OR SOUND Check whether the setting of AUDIO is right Check whether the disc is scratched or stained Check whether the AV connector and the output terminal is stained Check whether there is condensation inside the Lens If so leave the player off for an hour or s then try again Check whether the installation angle is less than 30 DISPLAY NO DISC OR BAD DISC Ensure that you have put the disc in the unit Check whether the disc is put in the reverse side Check whether the disc is distorted Check whether the disc is stained or scratched badly Ensure that the disc format is compatible to the player Ensure that the temperature inside the car is not too high If so cool off until the ambient temperature returns to normal Replace another disc to insert it into the disc compartment FOF REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK Check the batteries of remote control and make sure that they are powerful and have good conductivity Direct the remote control to the IR s
9. TTON other fitting scene automatically RELEASE BUTTON 15 2 INT BUTTON MODE All rating levels of Parental Control are as follows EhOCBUTTON 16 3 RPT BUTTON sees SEl BUTTON 17 4 RDM BUTTON 18 5 10 BUTTON 1 Rasage AND VOL KNOB 2 G ea ail 19 6 10 BUTTON 3 Pa m 8 SMALL MONITOR eb Eee SOCKET E PER 9 IR REMOTE SENSOR 21 RESET BUTTON R 10 BAND BUTTON 22 AV IN SOCKET 7 NC17 23 LED INDICATOR 8 Adult 11 UP AND DN BUTTONS 12 APS BUTTON 24 SD MMC CARD SLOT PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com HUE It is for adjusting the hue of the video output SATURATION It is for adjusting the saturation of the video output SHARPNESS It is for adjusting the sharpness of the video output 5 19 5 SPEAKER SETUP SPEAKER SETUP DOWNMIX DOWNMIX Itis for selecting your desired sound effect when there is not central speaker and sub woofer There are 3 mode LT RT STEREO VSS LT RT When playing a disc with PRO LOGIC Dolby stereo effect choose the item so it will output audio signal with vivid theatre effect STEREO If you choose the item when outputting audio signal with 5 1 channels it will output the left and right channels of signal when outputting audio signal with 2 channels it will output the common 2 channels of stereo signal VSS If you choose the item when playing a disc recorded with 5 1 channels the main channel speakers can output audio
10. User s Manual IN DASH DVD MP3 CD AM FM RECEIVER WITH 3 2 81mm WIDESCREEN TFT MONITOR WITH DUAL FRONT AND REAR USB PORTS SD MEMORY CARD PORT AND FRONT PANEL AV INPUT rrre ee patoas KIET EELT rrn eo DVO MP3 CD RECEIVER WITH 3 2 81mm Es EEN TFT MONITOR WITH DUAL FRONT AND REAR USB PORTS AND FRONT PANEL AV INPUT nam RCE savetein AUDIO SYSTEMS 800 999 1236 Bona Auto Syntema ia not alan with Ap k To ensure safety while driving and to comply with laws drivers should not watch video or operate the video device while driving PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com PRECAUTION WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC 4 SHOCK DO NOT EXPOSE RISK OF ELECTRIC SHOCK THIS APPLIANCE TO RAIN OR PONOTOPEN MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightening flash with arrowhead symbol within an equilateral triangle is intended the alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert user to A t
11. and then press the OK button to unlock it Press the gt button to enter it again then input a new password that you like and then press the OK button to make it effective Before the other persons see the Manual you should get the password in mind and cut out the part of PASSWORD in the Manual RATING This item is for setting a new rating level of the Parental Control 1 Select the PASSWORD item and then press the gt button to enter it then input the password mentioned above and then press the OK button to unlock the setting of the rating level of the Parental Control 2 Select the RATING item and then press the gt button to enter it then use the direction buttons to select your desired rating level then press the OK button to confirm 3 Select the PASSWORD item again and then press the gt button to enter it then input the password and then press the OK button to lock the new setting of the rating level of the Parental Control DEFAULT This item is for making all setup items change back to original status PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com 2 Common Operation 1 To turn on off the unit Under power off mode press the POWER button to turn on the unit Under power on mode long press the POWER button on the front panel or briefly press the POWER button on the remote control to turn off the unit To select function mode and switch on off TFT screen Press t
12. c So that you can playback the disc You must change the Parental Control setting to higher rating level NOTE 17 8 19 C5 If you have not changed the password the factory preset password for the DVD player is 0000 To change the password you should input the current password and then input the new password 2 times The figure of the front panel Parental Control The Parental Control function of a DVD player can control the playback of movie rated level in a disc You can set the DVD player to be a certain rating level with SETUP MENU on screen If the rating level in the disc is higher than one set in the DVD player the DVD player can not playback the disc The rating level setup can be protected by the password Therein if you select Unlock the Parental Control function will be invalid and all level DVD rating will be played The figure of the Unit Chassis Facet After removing the Front Panel The disc movie can be designed as that the DVD player will playback the different version of content of asame movie according to the different rating level set by POWER MUTE BUTTON Parental Control Depending on the DVD feature of seamless switching described DISC SLOT 13 EJECT BUTTON above the scenes that are not fitting for children will be cleared or replaced by the 14 1 PLAY PAUSE BU
13. control to select the STEREO or MONO sound mode for FM band 6 LOC BUTTON 1 In RADIO mode when the signal of the distance radio station is very weak and the receiving effect is bad during tuning check whether there is the word LOC on LCD If there is the word LOC on LCD press this button to turn off the LOC function then tune again for the distance radio station 2 In RADIO mode when the signal of the local radio station is too strong to lead that the interference to the receiving effect during tuning press this button to turn on the LOC function to display the word LOC on LCD then tune again for the local radio station 7 LOCAL AREA SELECT In radio mode press 1118 to turn to local area selection then press button or rotate vol tune to select frequency area 4 Basic Disc USB or MMC SD Operation 4 1 Begin playback 1 To connect an external monitor to this unit Connect the video output of this unit to the video input of the external monitor and select the right video input on the menu of the external monitor _ Common Question Q There is nothing displayed on the monitor when the DVD player is turned on How to solve this problem A Ensure that the monitor was set to right video input not TV channel for example if you make VIDEO1 INPUT of the monitor and DVD player connected with each other then you need to set the monitor input to VIDEO1 2 Press the RELEASE button to drop down the front panel
14. ding Mounting Ang Eserinin ennaa i 0 to 30 Video Specification Video TY PGi cack cata sesa Sets and ye ha deeds aes aoe odiee eta Fee eee dewaceles 16 9 and 4 3 Video Output level cc ceeeeeeeeeeeeeeeeeee tenes Composite 1 0 0 2Vp p Load impedance 75 ohms Horizontal RESOlUtiON 0 c cece cece eect ee ec teeta ea eeeeeeeeaeneees 500 Audio Specification Audio Output Analog aUudio ccccccccccccececeeeessesssseeees 2 0 1 0Vrms Frequency ReESponse s cseeeeeeeneee es 20Hz 20KHz at 1KHz 0 dB S N Ratio Audio ccieccsiccacectcceedenttve aeeeeneeeendss 90dB at 1KHz 0 dB SY oF e 100 rrtt rttttrrtntrtrrrnr ertrar rreren rrt 50dB Radio Specification FM Section Frequency range eceeceeeeeeeeeeeeeeeeeeeees 87 5MHz 107 9MHz US 87 5MHz 108 0MHz EU WSADIS SOMSILIVILY sce iiic sca cde ansncincadunintiiadiesinnoeinne a 3uV LF EPC QUCI CY ie sceicne icconea anicnincnat na ra ttaenwee 10 7MHz AM Section FOQUGNGCY a renren aea a aT 530KHz 1710KHz US 522KHz 1620KHz EU 1 2 ak OO N 4l 1 Before Operation 1 1 Glossary PBC playback control Itis a kind of signal menu recorded in the disc with SVCD or VCD2 0 format used for the playback control For the discs containing PBC It can playback interactive software with the menu displayed on monitor And if the disc contain still images it can playback high definition of still images Title Generally
15. ecvvasivctecveresden svasioa viavanacdannadedeanty Program PlayDackyccsscesccccareesancesincatosssseanedeesewsndoasenvsncesse Playback the Picture CD in JPEG Format Mp4 OPERATION be ESP and IDS Funct On isis cctsareonecwcsstaasestantiietiienteniavais ieies USB and MMC SD Reader Operation cece cece ee eeee a eee eeea enna es The DVD System Menu Setup Operation 5 20 Parental Controls sicceceisicdvetannqoeracteadtanssiasabdeiaeecnneenads 5 21 REGION COdG siipeni cacphiotesatacddeseaticesdeade IDEE eiA Ea EA aaa a aa aAA A A A A A A A A S OONDOAARWNM O 6 Trouble SNOOUING ssia aiaa i ia e a aia 26 T SpociigatON Siers aa e a a N aaa ARENSE 27 PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com 7 Specifications General Specification Power Supply Requirement cceeeseeeneeeeeeeeeeeeeeeeaeeaeetees DC 12V Maximum Power Output 05 4 x 80W measured at DC 14 4 V Dimensions W Xh X eee ee ee eee eee ee ee eee ee eeees 7 W x 2 H x 6 5 D DVD Deck Specification FOM ataco nri araia DVD VCD JPEG MP4 AVI ASF WMV MPEG 1 MPEG 2 MPEG 4 MP3 WMA CD Video System NTSC PAL PAL M PAL N AUTO optional Audio SYStOM 2 cesscrtscchisiencstiedeeetidelien ieee 24 bit 96KHz Loading SySteM cceeeeeeeeee nsec eee eeea eee eeeeeee eee eeneeneees Auto Loa
16. ensor of the player Check whether there are some obstacles between the remote control and IR sensor SOME FUNCTION BUTTONS DO NOT WORK Turn off the power then turn on again Reset the unit to zero then turn on again Remove the front panel from the unit then install it again and then turn on again THE RADIO DOES NOT WORK Check whether the antenna cable is connected firmly Or manually tune for a station 2al o ooo 5 21 The Region Code Q Why does the unit display REGION ERROR after inserting disc into disc compartment A Because the DVD player and disc has respective region code If the region codes of them do not match with each other the DVD player can not play the disc Appendix The region code of DVD The Motion Picture Association of America MPAA divided the world into 6 regions and gave every region a code namely region code The region codes and the countries or areas represented by the region codes are as follows Region 1 America Canada East Pacific Inlands Region 2 Japan West Europe North Europe Egypt South Africa Middle East Region 3 South east Asian countries include Taiwan Hong Kong South Korea Thailand indonesia etc Region 4 Australia New Zealand Central South America South Pacific Inlands Region 5 Russia Mongolia Indian Peninsula Middle Asia East Europe North Korea North Africa North west Asia etc Region 6 China mainland PDF created wi
17. er use of battery may cause overheating or explosion and could result in injury or fire 2 Battery leakage may cause damage to the remote control Battery Life 6 months with normal use in normal room temperature 3 Do not short the battery 4 Do not throw the battery into fire 5 To avoid the risk of accident keep the battery out of reach of children PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com 6 Trouble Shooting Please read the user manual carefully before using the DVD player If you have any trouble using this player try to solve the problems by the suggestions mentioned below If youcan not remove the trouble after using all the suggestions please contact the company or the technical service center authorized by us For the sake of your safety please do not open the cover and repair the player by yourself if that it may cause electric shock NO PICTURE SOUND AND INDICATION Ensure that the power switch is on Ensure that the power cord is not damaged or the fuse is not blown Ensure that the power plug is connected to the inlet tightly NO SOUND BUT HAVE PICTURE Ensure that the player s audio output has a good connection with amplifier Check whether the audio connector is damaged Check whether you have turned down the volume Ensure that you have set the right AUDIO setup of the player Ensure that the audio is not muted NO PICTURE BUT HAVE SOU
18. he MODE button to select TUNER DISC After inserting a disc USB After inserting a USB storage Card After inserting a MMC or SD card or AUX mode Long press MODE button to switch off the TFT screen when driving on night time Then press one of any buttons to resume it Note This unit has front and rear USB Only one will work at a time To adjust sound level Rotate the VOL knob on the front panel or press or hold the or button on the remote control to directly adjust the volume level To mute sound Press the MUTE button on the remote control to turn on off MUTE mode Briefly pressing the POWER button on the front panel also can turn on off MUTE mode In MUTE mode the MUTE mode can be released by pressing the following buttons MUTE VOL or SEL MODE To display and adjust the clock time Press the CLK button to display clock time on the small monitor of the front panel Then long press the CLK button to change the color of the hour of the clock then rotate the VOL knob on the front panel or press the or button on the remote control to adjust the hour and then briefly press the SEL button to change the color of the minute of the clock then rotate the VOL knob on the front panel or press the or button on the remote control to adjust the minute To select a preset EQ mode Press the EQ button to select the preset music equalizer curves POP ROCK CLAS FLAT The sound effect will be changed
19. he presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CLASS 1 LASER PRODUCT Laser product symbol located on the rear panel of the unit indicate this player is a class laser product only use weak laser and no hazardous radiation outside of the unit 1 Read through this instruction manual before installation and use 2 Before removing the unit remove the disc from the unit first 3 Do not open the cover or touch any of the components exposed out of the unit only for qualified technicians 4 Do not expose the unit to direct sunlight or nearby objects that radiate heat to avoid damage the unit 5 Do not place the unit in moist and humid conditions 6 Please ensure the ventilation holes are not covered to avoid overheating and malfunction 7 Clear the panel and case with soft dry cloth only do not apply any kind of thinner alcohol or sprays 3 Contents CLOG OPSrallON csi canisnaccecensaasinasdesiaseesancaeaccbesteaneddoreesaenabedausscuss saaazca deed aS 1 GlOSSATYyi riiin 2 Precautions 3 Maintenance and Cleaning of Discs 4 Battery Information of the Remote Control 5 The Remote Control Description 6 7 8 B 1 1 1 1 1 1 Locations and Names of the Controls 1 Description of the Rear Cabinet ee 1 Unie installati o Msni anessa wadiadriceiaavaceaaadaastadeadauteowaxdvad 2 COMMON OperatioN ssiri n
20. in random chapter first press the 10 button for 3 times then press the 4 button the 0 10 button is used as the 0 button Note long pressing the 10 or 10 button can play the next 10 or previous 10 5 8 Playback in Different Angle chapter track only for MP3 WMA 1 When playing a VCD MP3 WMA CD disc the ANGLE button on the remote control is not available 4 6 Select Chapter Track with the Root PBC Menu If the disc includes the root PBC menu When playing a DVD disc Press the TITLE button on the remote control to display the title list Press the direction buttons to select your desired title and then press the OK or PLAY button to open the root menu of the selected title 3 Press the direction buttons to select your desired chapter finally press the 2 When playing a DVD disc press the ANGLE button repeatedly on the remote control to view in different angle This function is only for the DVD discs with ANGLE function fo 5 9 Playback in Zoom Mode OK or PLAY button to play the selected chapter During playback pressing the MENU button can directly display the root In DVD VCD mode during playback press the ZOOM button continuously menu of the title thatis playing to enlarge acertain area of the images on the screen with these multiples PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com Du
21. ing to turn on the PBC function it will play from the beginning of the disc till it display the PBC menu on monitor if the disc include the PBC menu 2 Press the number buttons to select your desired track to play In MP3 WMA mode 1 The root menu is displayed on the monitor screen all the time and the TITLE or MENU button is not available 2 Press the direction buttons to select your desired FOLDER then press the OK or PLAY button to open the FOLDER and then press the direction buttons to select your desired file finally press the OK button to play the selected file In CD mode the TITLE PBC MENU buttons are disabled 4 7 Terminate the Playback 1 Press the RELEASE button to flip down the front panel then press the EJECT button to eject disc and then remove the disc and flip up the front panel till hearing a clip 2 Long press the POWER button on the front panel or briefly press the POWER button on the remote control to turn off the DVD player 5 Advanced Disc USB or MMC SD Operation 5 1 Playback with Speed During normal playback long press the UP DN button on the front panel or the gt gt lt lt button on the remote control continuously to fast forwards or backwards at the following speeds x2 x4 x8 x20 normal During speed playback press the PLAY button to resume normal playback 5 2 Playback with Slow Speed During playback press the SLOW_FWD button to execute the Slow Forward funct
22. ing track the remained time of the playing track 5 5 Playback in Scan Mode 4 2 Pause Playback 1 When playing a VCD PBC OFF CD disc press the INT button to play the previous 15 seconds part of each track on the disc Press the INT button When playing a DVD VCD CD MP3 WMaA disc press the PAUSE button on again to resume normal playback remote control to pause the playback press the PLAY button to resume normal playback 2 When playing a DVD MP3 WMA disc the INT button is not available 4 3 Stop Playback 5 6 Playback from a specified chapter track or a specified time When playing a DVD VCD MP3 WMAICD disc press the STOP button once to F A pause the playback then press the PLAY button to resume the normal playback 1 When playing a DVD disc press the SEARCH button to display a interface press the STOP button twice to full stop the playback then press the PLAY and highlight the title item then use the number buttons to input the serial button to start playback from the beginning of the first chapter track number of the title use the direction buttons to highlight the chapter item then use the number buttons to input the serial number of the chapter you can still use the direction buttons to highlight the time item then use the 4 4 Select Chapter Track with the UP DN or the gt gt lt lt Button number buttons to input the desired time to start playback finally press the OK or PLAY button to play the
23. ion With each consecutive pressing of the SLOW_FWD button the playback speed decreases The speed levels in Slow Forward are as follows x1 2 x1 3 x1 4 x1 5 x1 6 x1 7 normal
24. n e a o a Ea 10 3 R dig OPeratlONs sicccccssctissccsasnescctdexsdacicipawsspecadieeresscs sadeeesaneescadesa eye seesedares ere 12 4 Basic Disc USB or MMC SD Operation cccccece eee ee cece eee eee eee eeeeeaeeaeeeees 13 4 1 Begin Playback eee is 4 2 Pause Playback oie 4 3 StOp Pla VDACK asmarani ma naaa anaE AE AEON DRA EE ENESE 4 4 Select Chapter Track with the UP DN or the gt gt lt lt Buttons 14 4 5 Select Chapter Track with the Number Buttons 4 6 Select Chapter Track with the Root PBC Menu 4 7 Terminate the Playback vic ccc icccesseissciascasreseseneesceaseesssesdeasederecossa sor aia 5 Qa vanced Disc USB or MMC SD Operation cece eee e eee eeeeeeae eee 15 Playback with SPO a issiscsiscnssncetateasdenanaeantieces Playback with Slow Speed Playback with Still Frame Playback Repeatedly ecvesenuvnscscedskussatstnces seniors aduecdadesessbcavennes veanbemedsenssicns sl ONG AlRE PC atic ie ccncimsanctessnreons ee aa EAEE E EN ANEAN 2 A B Repeat Playback in Scan Mode Playback from a specified Chapter Track or a Specified Time ae Playback in RANG OM sei siese odad eraa a aeaaaioii Playb ck inDifferentANgl ess sessernassintierasaan na anniina anaia Playback in Zoom Mode Change the Caption Language Change the Audio Language Change the Video Signal System cece eee cette ea eeee seen enna eee Look over the Playback Status cisncasdesii
25. nect the negative pole of the power source Otherwise the video on screen may flaches Connecting the parking brake line to the parking brake system built in the car Parking brake ZEN E lt Parking brake switch inside the car Parking brake wires Green To metallic body or chassis of the car Rear View Camera In any running mode the video signal will switch to camera mode if applicable when car is in reverse After taking the car out of reverse it will resume to its previous mode po 6 os Lancie Analog on site backup Analog on site backup Warning Always check the surrounding environment Objects might be reversed The rear view camera is designed only to assist while reversing Due to the limitations of the camera angle and range it may cause accidents if the driver relies solely on the reverse camera and display A S The Description of the Fixed ISO Female Connector 5 19 2 LANGUAGE SETUP mo 1 b ls 7 JB 2 m le lel LANGUAGE SETUP m OSD LANGUAGE Ah B b Fia AUDIO LANG JA 2 4 le fe gt SUBTITLE LANG ee MENULANG CONNECTOR A CONNECTOR B is 1 Rear Right Speaker 2 2 a misht k OSD LANGUAGE 3 3 Front Right Speaker This item is for selecting the language of the SYSTEM MENU and all operating 4 Memory 12V yellow 4 Front Right Speaker prompt interface displayed during playback 5 Auto An
26. on on the front panel or the gt gt lt lt button on the remote control to manually search up or down with step by step for your desired station from the current frequency 3 APS BUTTON In RADIO mode 1 By long pressing the APS button the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished then the 6 strongest stations are preset to the corresponding preset number memory bank The AS operation is implemented in each bank of the selected band When the AS operation is finished it will resume broadcasting on the M1 It can store 3x6 stations for FM and 2x6 stations for AM in all 2 When briefly pressing the APS button on the front panel or the remote control the radio searches for each preset station from the M1 When the field strength level is more than the threshold level of the stop level the radio is holding at that preset number for few seconds with releasing mute and then searches again After finishing a circle of searching it will stop searching on the M1 NOTE In FM band FM1 FM2 FM is checked one at a time In AM band AM1 AM2 is checked one at a time 4 PRESET STATION 1 6 BUTTONS In RADIO mode 1 To memorize the current frequency on the current band long press any one of the six preset buttons 1 6 2 To recall the preset memory on the current band press one of the preset buttons 1 6 5 STEREO MONO BUTTON Press the ST button on the remote
27. r 1 3 Maintenance and Cleaning of Discs Disc Maintenance 1 To keep the disc clean handle the disc by its edge do not touch the disc surface of the play side 2 Do not stick paper or tape on the disc If there is anything on the disc surface wipe it up with a soft cloth before using 3 Do not expose the disc to direct sunlight or nearby heat sources such as caliduct or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature 4 Put the disc inside disc case to keep temperature after finishing playback Disc Cleaning 1 Before playing wipe the disc with a clean cloth wipe the disc outwards from the disc center 2 Do not use petrol thinner commercial cleaner or anti static spray used for plastic LP to wipe disc 1 4 Battery Information of the Remote Control Replace Battery in the Remote Control 1 Before using the remote control for the first time pull the insulating sheet out of the remote control as the direction indicated by the arrow see fig 1 2 Press the movable block hold as the direction indicated by theA arrow See fig 2 then pull the battery holder out of the remote control as the direction indicated by the B arrow see fig 2 3 Replace the old battery by a new battery with polarity side upward See fig 3 4 Insert the battery holder to the original position in remote control See fig 3 Note about the Battery of the Remote Control 1 Improp
28. ring slow forward press the PLAY button to resume normal playback This function is only for video 5 3 Playback with still frame If the unit is currently playing DVD VCD disc press the STEP button consecutively to display the still frame forward with step by step Press the PLAY button to resume normal playback 5 4 Playback Repeatedly 5 4 1 ONE ALL Repeat 1 Inthe mode of DVD disc playback Press the RPT button to select REP CHAPTER REP TITLE REP ALL or REP OFF 2 Inthe mode of VCD PBC OFF CD disc playback press the RPT button to select REP ONE REP ALL or OFF When it is in the state of PBC ON during VCD disc playing the RPT button are not available 3 Inthe mode of MP3 WMA disc playback Press the RPT button to select REP ONE REP DIR REP ALL or OFF 5 4 2 A B Repeat Press the A B button if you want to repeat a specific segment on a disc that you define 1 Press the A B button at a point A where you want it to be the start point of the repeat segment Press the A B button again at a point B where you want it to be the terminal point of the repeat segment Then it will play the segment repeatedly 2 Tocancel the A B repeat mode and resume normal playback press the A B button for the third time Note During VCD MP3 WMA CD playback points A and B must be within the same track During DVD playback points Aand B can be selected from different chapters 15 In VCD mode 1 When start
29. signal with VSS effect 5 19 6 DIGITAL SETUP DIGITAL SETUP OP MODE DYNAMIC RANGE DUAL MONO OP MODE Itis for selecting audio output mode LINE OUT It can linearly compress the audio signal So the volume level is lower RF REMOD It can make the volume level higher DYNAMIC RANGE After selecting the compression mode of LINE OUT set the item so you can adjust the linear compression ratio If you set it to be FULL the Peak to Peak value of the audio signal is the minimum if you set it to be OFF the Peak to Peak value is the maximum DUAL MONO It is for selecting a desired audio output mode for the left and right ways of signal There are 4 modes in all as follows STEREO MONO L MONO R MIX MONO PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com 1 7 Description of the Rear Cabinet GREEN e GREY SUBWOOFER RED R RED R jK BLACK REAR RCA LINE OUT FRONT RCA LINE OUT Fixing Screw Bolt Reversal line White Parking Line GREEN BLACK YELLOW AM FM Antenna YELLOW USB LINE IN Fixed ISO Female Connector VIDEO OUT Rear View Camera GRAY YELLOW Note 1 Parking wire must be connected and the parking brake must be engaged in order for the monitor to work 2 Use the clip end of the Ground wire provided by manufacturer to connect Mounting Screw use the other end of the Ground wire to con
30. tenna blue 5 Front Left Speaker AUDIO LANG 6 6 Front Left S ker Se k A z 7 12V To Ignition Key red 7 Ront iett AE This item is for selecting a audio language 8 GROUND black 8 Rear Left Speaker SUBTITLE LANG This item is for selecting a subtitle language MENU LANG This i is f lecti i 1 8 UNIT INSTALLATION is item is for selecting a disc menu language INSTALLATION INSTRUCTIONS 5 19 3 AUDIO SETUP THE UNIT INSTALLATION IS ANTI THEFT ONE THE UNIT CHASSIS WEARS A SLIDING METAL HOUSING FIRSTLY CONNECT THE POWER LINES SPEAKER LINES AND AUTO ANTENNA ACCORDING TO MANUAL REQUIREMENT THEN INSTALL THE SLIDING METAL HOUSING IN A CAR ACCORDING TO THE DIAGRAM AUDIO SETUP TO BOOST UP THE CAPABILITY OF ANTI JAMMING PLEASE FIX THE METAL STRAP ON THE METAL AUDIO OUT z CONNECTED TO THE CHASSIS OF KEY METAL STRAP a SELECT THE PROPER TABS OF THE SLIDING METAL HOUSING TO FIX THE SLIDING METAL HOUSING AUDIO OUT UNIT CHASSIS there is only ANALOG mode i e SPDIF OFF not optional KEY Itis for selecting your desired basic music tone from low to high PLASTIC TRIM OUT N FRONT PANEL 5 19 4 VIDEO SETUP TO DRAW THE CHASSIS OUT OF THE THE AEMAISE VIDEO SETUP INTO THE TWO SIDES OF CHASSIS BRIGHTNESS CONTRAST NOTE 2 REMOVE THE SLIDING METAL HOUSING SCREWS BEFORE INSTALLING SATU RATION SHARPNESS BRIGHTNESS It is for adjusting the brightness of the video output CONTRAST
31. th FinePrint pdfFactory Pro trial version http www pdffactory com 1 5 The Remote Control Description JOO Cam Bo STO QODTE aO O VY O OOO GOTE C HH a 2tS6 OOte aS 3035 16 SEARCH BUTTON 17 RDM BUTTON 18 RPT BUTTON 19 SUBTITLE BUTTON 20 TITLE PBC BUTTON 21 ANGLE ST BUTTON 22 ZOOM BUTTON 23 AUDIO BUTTON 24 CLK BUTTON 25 A B BUTTON 26 INT BUTTON 27 EQ BUTTON 1 P N BUTTON 2 MENU BUTTON 3 POWER BUTTON 4 BUTTON 5 gt gt BUTTON 6 gt BUTTON 7 lt lt BUTTON 8 v BUTTON 9 SEL BUTTON 10 PLAY PAUSE BUTTON 11 NUMBER 0 10 10 10 BUTTONS 12 10 BUTTON 13 SETUP BUTTON 14 MODE BUTTON 15 APS BUTTON 28 LOC SLOW FWD BUTTON 29 MUTE BUTTON 30 STOP BUTTON 31 VOLUME BUTTON 32 lt BUTTON 33 OK BUTTON 34 VOLUME BUTTON 35 BAND BUTTON 36 PROG BUTTON 37 OSD BUTTON 38 LOUD BUTTON 39 STEP BUTTON Z 1 6 Locations and Names of the Controls 11 G X90445 6 6X7 8 5 20 Parental Control Q Why after inserting DVD disc in the disc slot a dialogue window appears that asks to input a 4 digits password A This is because the movie you are playing was rated with the Parental Control and the current rating level of DVD player is lower than the current disc You must input right password and enter it to entry Parental Control setup menu and then set a equal or higher rating level than one of current dis
32. the title is the important part of DVD disc for example the theme part of movie is title 1 the part described how to make movie is title 2 the castis title 3 etc Every title contain a serial number that is easy to lookup Chapter A title can be divided into several blocks so that every block can be operated as aunit the unit is called chapter The chapter contain a unit at least Track It is the biggest component of VCD Generally every song of karaoke disc is a track PROTECTIVE CASE 2 Precautions Safety FRONT PANEL Power Source The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit The unit is designed for negative terminal of the battery which is connected to the vehicle metal Please confirm it before installation Do not allow the speaker wires to be shorted together when the unit is switched on Otherwise it may overload or burn out the power amplifier Do not install the detachable panel before connecting the wire The protective case is to safely keep the front panel see the photo Environment Do not use this unit when water and moisture is near it If moisture forms inside the Lens it may not operate properly To correct this problem wait about one hour for the moisture to evaporate If the car interior is extremely hot do not use the player until the car has been driven for a while to cool off the interio
33. vant ID3 tag information in version 1 0 2 0 format the 3 items underlined above will be scrolling on the LCD display otherwise they will not 5 18 USB and MMC SD Reader Operation 5 1 2 19 The DVD System Menu Setup Operation Power on the DVD player then insert the USB storage or MMC SD Card first flip down the front panel and then the monitor will display the root menu of the USB storage or MMC SD Card All the operations are same as ones of the corresponding format When you want to pull out the card first push it and then pull it out NS D SD MMC CARD Press the SETUP button on the remote control to access the DVD System Menu on the monitor There are 6 setup pages in all for the System Menu Press the gt or lt button to select a desired setup page Press the or v button to select an setup item in the selected setup page Press the gt button to enter the setup item Then press the v or button to select a desired mode of the setup item finally press the OK button to confirm it Press the lt button to return to the upper level Press the SETUP button again or use the direction buttons to highlight the item of the EXIT SETUP and then press the OK button to exit the System Menu PDF created with FinePrint pdfFactory Pro trial version http www pdffactory com 5 14 Program Playback It allows you to enter the order in which you want some chapters tracks in DVD VCD MP3 WMA CD disc to
34. ying a VCD disc press the AUDIO button repeatedly to select the sound mode of the MONO L MONO R MIX MONO and Stereo no language function 3 When playing a CD WMA MP3 disc the AUDIO button is disabled 5 12 Change the Video Signal System During playback of DVD VCD disc press the BAND P N button on the front panel or on the remote control repeatedly to change the VIDEO SIGNAL SYSTEM mode 5 13 Look over the Playback Status 1 When playing a DVD disc press the OSD button repeatedly on the remote control to turn on off the playback status When it is on it will display the information such as the serial number of the playing title the serial number of the playing chapter the elapsed time of the playing chapter the remained time of the playing chapter the elapsed time of the playing title the remained time of the playing title etc 2 When playing a VCD CD disc press the OSD button repeatedly on the remote control to turn on off the playback status When it is on it will display the information such as the serial number of the playing track the elapsed time of the playing track the remained time of the playing track the elapsted time of the disc the remained time of the disc 3 When playing a MP3 WMA disc press the OSD button repeatedly on the remote control to turn on off the playback status When itis on it will display the information such as the serial number of the playing track the elapsed time of the play
Download Pdf Manuals
Related Search