Home

Shuttle KD20 storage server

1. gt Previous Page Allows access to a previous screen 4 Download Allows access to download M Edit Allows access to editing tool functions TG Add Folder Allows access to add a folder LR Select Allows selection of files or folders 4 7 DOCUMENT FILES OMNINAS For ANDROID Document Files To open any Document files 1 From the NAS List main screen tap on Document 2 Tap any sub folder to view the files if needed 3 Tap on any file to view automatically OB PA FX Ga 4 59 PM Opening Document Files 4 8 Movie FILES Movie Files To open any Movie file s 1 From the NAS List main screen tap on Movie 2 Tap any sub folder to view the files if needed 3 Tap on any file to play automatically D5 Store DS Store Bree OMNINAS For ANDROID en en videofile 1 173867549 ag Opening Movie Files 4 9 PHOTO FILES Photo Files To open Photo files 1 From the NAS List main screen tap on Photo 2 Tap any sub folder to view the files if needed 3 Tap on any file to view automatically Br OPA Fm 11 56 AM Photo san gt E aE ars Rial 4 Aton LanSetting jpg 5 Aton ShutdowReboot jpg We 534516608 02beed79d7 jpg 6 Aton DiskManager jpg Zi ia 7 Aton Users jpg v Opening Photo Files 4 10 OMNINAS For ANDROID PHOTO FILES OMNINAS For ANDROID Posting to Facebook To post a photo on Facebook Note Facebook account is requir
2. HDD1 Tray Released 5 Grasp the tray and slide it out Bottom side of tray Removing the HDD1 Tray 6 Place the tray on a clean surface 7 Position the HDD as indicated in the following illustration Make sure the new HDD is facing up and the connectors are positioned outward 2 2 HARDWARE INSTALLATION GETTING STARTED 8 Insert the new HDD into the tray 9 Secure with the provided screws Front side HDD connectors Securing the HDD Screws 10 Turn the HDD assembly over making sure the This side up label is facing up see follow ing figure 2 3 HARDWARE INSTALLATION GETTING STARTED 11 Slide the HDD assembly into place until it is flush in the bay Tray release Installing the HDD Tray Assembly WARNING HDD tray must be flush with the bay see following illustration lip LU Incorrect Correct position position ZF I T gt gt HDD Installation Position 2 4 HARDWARE INSTALLATION GETTING STARTED 12 Raise the tray release to lock the HDD assembly An audible click sounds when the tray is locked Tray release Locking the HDD Assembly 13 Close the bay cover Closing the HDD Bay Cover 14 To install a second hard disk drive repeat the previous instructions Your system is now ready to connect your local network See Connecting the Ethernet Port
3. Single Single Disk Available Capacity 76 f 4GB Rebuild the System Use the current RAID mode Step5 Create a RAID Disk Screen Note The time required to rebuild a system is dependent on the RAID type selected and the size of hard drives CONNECTING THE OMNINAS GETTING STARTED Step 6 Create an User Account Create an user account to access the files in OMNINAS The user account is to be used within local network LAN and Share Box User Account testuser Please enter 2 16 characters You may use English letters Capital or lowercase letters numbers and special characters such a5 amp i etc User Password 2404 Please enter 0 37 characters You may use English letiers Capital or lowercase letters numbers and special characters such as 7 amp etc Re confirme your password cece Next Step Step6 Create an User Account Screen Step 7 Completed Setup Completed You may start using OMNINAS now OMNINAS Name nastest Adminstrator Account admin User Account testuser or r Enter OMNINAS Goto web browser to Goto File Explorer management page access files http 168 254 100 2007 http i weww omninas net key in 169 254 100 200 to Step7 Completed Screen 2 17 CONNECTING THE OMNINAS GETTING STARTED Connecting by Web Browser After initial setup you can manage your OMNINAS through the interface menus Connecting to the management me
4. To login L Bii OMNINAS Your Own Private Cloud Username a Password ant access acco T OMNINAS Login Screen 1 Enter the Username and Password Default Username admin Password Note There is no default password 2 Click Enter ka to access the administration interface IMPORTANT In the event of a lost password click on Can t access my account to follow the reset process If the Web interface is idle for 10 minutes the system automatically logs out 3 11 UseER MANAGEMENT Wes INTERFACE User Management This section provides information for the management of user accounts The provided guidelines cover adding editing deleting user profiles as well as viewing of user lists Viewing User List To view edit or delete user profiles use the User List screen to manage available user profiles Your Own Yrivate Cloud OMNINAS English v A G EE PI amp ETR gt Folder List JAda Jser Ei User List Settings pa Storage User Name Description Action USB lt Backup BT Download Share Box ww Media Server amp Share User List Screen The following users are available by default admin The administrator is configured with full access to system administration and all network shares This account cannot be deleted Adding Users To create a user the following information is required User name Can not exceed 32 charact
5. ICON ITEM DESCRIPTION Enable or disable remote sharing function through the omninas net host serv ers amp Share Box Setting Note The default Port setting is recommended to avoid getting blocked by your fire wall or anti virus software Home Click to return to the Home menu Logout Click to log off the current user OVERVIEW Wes INTERFACE Media Server Menu OMNINAS m GO Your Own Private Cloud Media Server Media Server on off Rescan BT Download Media Server amp Media Server Menu Media Server Menu Settings ICON ITEM DESCRIPTION The Media Server menu allows you to enable or disable the media server function Media Server Note BT Download and Media Server cannot be enabled at the same time To use one function the other must be disabled Home Click to return to the Home menu Logout Click to log off the current user am Launching the Interface You can access the OMNINAS Web Interface by using the OMNINAS Finder or through a web browser To use the OMNINAS Finder utility see Connecting Your OMNINAS To use a web browser see Connecting by Web Browser 3 10 LOGGING IN Wes INTERFACE Logging In The login screen appears and prompts for a Username and Password The default username is admin There is no default password Note You can change the language setting on this screen by clicking on the language drop down menu
6. O we Tw innes ee f gt Folder List Screen Editing Folders 1 Inthe Folder List tab select a folder and click Edit to make changes You can change the share attribute private public user access rights or basic description 2 Click Save Ean Folder t Folder List AAdd User i Puser List Status Folder Mame Public Action epe Editing Available Folders 3 27 SHARE MANAGEMENT Wes INTERFACE Deleting Folders Public and private folders can be deleted from the folder list System default folders are per manant and are not available for deletion IMPORTANT Once a folder is deleted the data stored within the folder is deleted as well After deletion creating folder of the same name will not restore the lost data 1 Inthe Folder List tab select a folder and click Delete e Add Folder ea Folder List 9Add User User List Status Folder Name Public Action Pe fo o oy aa ve fee wise Deleting Available Folder 2 Aprompt displays click OK to continue or Cancel to return to Folder List 3 Aconfirmation prompt displays click OK to continue or Cancel to return to Folder List 4 The system beeps and returns to the Folder List screen The folder is deleted 3 28 USB MANAGEMENT Wes INTERFACE USB Management The USB management function allows you to setup Printer Settings and Auto Copy for devices connected to the OMNINAS through the USB ports Prin
7. Setting Up Auto Copy Function 1 From the Home menu select USB and click Auto Copy 2 Select the target port SD or USB 3 0 to configure and click Enable 3 Click the destination folder drop down menu and select the destination folder This is the folder where all content will be copied once the source media is inserted into the OMNINAS as Printer Setting Auto Copy Auto copy from SD Enable Disable Select NAS destination folder iTunes vi Auto copy from USB3 0 port S Enable Disable Select NAS destination folder iTunes To perform auto copy please remove all backup jobs on SDorUj_ Selecting a Target Folder for Auto Copy 3 30 SysTEM LOG Wes INTERFACE System Log The Log function under Settings provides a list of history on system and user activities The Log function allows access to Clear All Logs Next Page and Last Page Clear All Logs deletes all log entries To view logs use Next Page Last Page and scroll bars OMNINAS Your Own Private Cloud Settings pa Storage USB lt gt Backup BT Download Share Box Media Server amp Clearing Logs 2012 07 16 07 20 52 2012 07 16 07 20 00 2012 07 15 21 32 24 2012 07 15 21 31 42 2012 07 15 21 30 27 2012 07 15 21 26 00 2012 07 15 21 16 42 2012 07 15 21 14 58 2012 07 15 21 00 39 2012 07 15 21 00 03 2012 07 15 20 58 52 2012 07 15 20 57 43 2012 07 15 20 57 01 2012 07 15 20 36 05 2012 07 1
8. 2 5 CONNECTING THE OMNINAS GETTING STARTED Connecting the OMNINAS Connecting the Ethernet Port The OMNINAS must be configured and setup before use Two connection methods are support ed e Switch router to OMNINAS e Direct PC laptop to OMNINAS Connect to a Switch or Router 1 Connect one end of the provided LAN cable to the LAN port on the OMNINAS 2 Connect the other end to a LAN port on the DHCP enabled router see following figure Connecting to a Router Your OMNINAS is now ready for powering on See Connecting to Power 2 6 CONNECTING THE OMNINAS GETTING STARTED Connect Directly to a PC or Laptop 1 Set your PC Laptop s IP settings to match the network subnet group of the OMNINAS Example OMNINAS default IP settings 169 254 100 200 Configure your PC to these settings 169 254 XX X Whereas XX represents a number from 1 to 254 and X represents a number from 1 to 254 other than 200 2 Connect one end of the LAN cable to the OMNINAS 3 Connect the other end to your PC see following figure Connecting to a PC Laptop 2 CONNECTING THE OMNINAS GETTING STARTED Connecting to Power 1 Connect the power jack to the back of the OMNINAS DC IN 2 Connect one end of the power cable to the supplied power adapter and the other end toa wall outlet See the following figure ul Connecting the Power Adapter Note The Power Adapter diagram depicts a typical wall socket Y
9. Enable or disable auto copying function to an SD card or an external USB device Note Click to return to the Home menu Click to log off the current user 3 6 Auto copy is only available on USB port 1 front and SD card slot OVERVIEW Wes INTERFACE Backup Menu Q lt Z Z D ul Your Own Private Cloud English z Backup Setting Settings pa Storage Backup from OMNINAS KD20 to External Devices Select OMNINAS KD20 Source disk Description Name ofthe backup job max 64 characters or less Select your backup destination BT Backup to External Devices BT Download skjer 9 Hitachi HTS542516K9SA00 10 1 156 288GB Share Box ww Backup to OMNINAS KD20 Username Backup c i MM it Media Server 4 Password Time of Execution Weekdays Emon Eltue Elwea Eltnu Geri O sat E sun Hours Minutes 9 e Hours 0 fe Minutes Backup Menu Backup Menu Settings ICON ITEM DESCRIPTION Backup Log Displays a history list of executed backup events Backup Setting List Displays a list of all created back up settings Create and schedule backup events from a selected source file to a target external or second OMNINAS device Backup now function is available for instant backup events Note Events are executed in a sequential order The backup now function does not override an ongoing event When a schedule
10. Your Own Private Cloud English Settings r List dadduser User List Storage User Name Description Action USB lt Backup BT Download Share Box dg Media Server amp Share Menu Share Menu Settings ICON ITEM DESCRIPTION Add Folder Add public or private folders Display list of available folders edit and delete both user created and default Folder List folders Add User Add user profiles Display list of available users edit and delete the user profiles User List Note Administrator account cannot be deleted However the administrator pass word can be edited General menu under Setting 3 5 OVERVIEW ICON am ITEM DESCRIPTION Home Click to return to the Home menu Logout Click to log off the current user USB Menu OMNINAS Your Own Private Cloud English A a Aut Coy N Printer Setting wa Cipy USB Menu Settings ICON F Share Auto copy from SD Enable Disable Select NAS destination folder disk USB lt Auto copy from USB3 0 port Enable Disable Backup ps Select NAS destination folder disk x E gt a a BT Download To perform auto copy please remove all backup jobs on SD or USB3 0 port Share Box mapa Media Server amp USB Menu ITEM DESCRIPTION Printer Setting Display status information for connected printer devices Wes INTERFACE
11. under the same subnet If the hard drives are not yet configured the OMNINAS Wizard screen displays You must configure the disks before continuing 2 20 CONNECTING THE OMNINAS GETTING STARTED Mapping Network Drives You can create a shortcut map to an OMNINAS folder as a network drive on Windows work group networks Once it is mapped shortcut you can access it from your computer or Windows Explorer There are two methods to create a short cut mapping all the available drives at once or map ping selected individual drives Before you can map a drive the OMNINAS device must be con figured and initialized See System Initializing Search 80 EE 73 3A D5 CD _ 1 10 20120815 A come ct Q Delete Network Drives Gp mo bt Help Exit Mapping a Network Drive Map All 1 In the OMNINAS Finder window select a NAS device 2 Click Map Network Drives The Resource Mapping table displays The table lists available OMNINAS folders drive let ters and connection type 3 Click the Drive drop down menu to select a drive letter for each folder 4 Click the Connect drop down menu to select a connection type Permanent temporary for each folder 192 168 1 33 usbdisk 10 1 192 168 1 33Tunes 1192 168 1 33 disk 192 168 1 33 Wrivate1 11192 168 1 33 Folder 1 Mapping All Folders 2 21 CONNECTING THE OMNINAS GETTING STARTED 5 Once the folder options are configured cli
12. wove 2012 06 04 10 09 26 48 6 MB Q big buck bunny 1080p surround avi wove 2011 05 19 17 53 18 885 6 MB Q big buck bunny 1080p surround mp4 wove 2012 06 04 10 08 36 271 2 MB Rio B KER KHF MR EH mpa woe 2012 06 01 14 35 36 77 1 MB ok RET IRIE Ice Age 4 REHA mp4 2012 06 01 14 38 48 59 1 MB f Oo Q um Opening Movie Files Note Clicking on Edit allows you access to Rename Copy Move and Download functions VIEWING PHOTO FILES OMNINAS For 10S Viewing Photo Files To open any photo files 1 From the NAS List main screen tap on the Pictures main file Tap any sub folder to view the files if needed Tap on any file to view a photo automatically one by one Tap See All to view all photos Tap Done to view photos one by one Tap the file name on the upper left screen to return to file folder Tap slash to return to NAS List te gt Posting to Facebook To post a photo on Facebook Note Facebook account required 1 From the NAS List screen select your device and tap to login 2 Tap Edit on the upper screen A red circled icon appears next to each photo file Select and tap on a photo file 3 Select the image to use 4 Amenu screen opens tap Share Rename Download Cancel Sharing Photos 5 8 VIEWING PHOTO FILES OMNINAS For 10S 5 Tap Facebook Facebook Cancel Sharing a Photo to Facebook 6 Log in to Facebook if prompted Note Facebook shar
13. 2 Log in to the web interface screen 3 Click on Storage gt Auto Mirror to view the enable options 4 Select Enable and click Save to proceed i Auto Mirror JDisk Manager RAID Manager Current RAID Mode SINGLE Auto Mirror Enable Disable Only applicable to RAID 1 Auto Mirror Function Auto Mirroring is now active on your OMNINAS device The second hard drive can be installed at this time See Disk Mangement 5 On the bay cover press in the indicator to open the cover The cover pops open 6 Extend the cover to allow access to the HDD trays 7 Pull the tray release to unlock the hard disk tray The HDD slides out 8 Grasp the tray and slide it out to remove the tray 9 Install the hard drive see First Instance 3 24 SHARE MANAGEMENT Wes INTERFACE The corresponding HDD LED light and the mirroring process starts In the Disk Manager screen the auto mlrroring function displays the synchronizing of both hard drives JAuto Mirror Q Disk Manager RAID Manager Internal Disks Disk No Capacity GB h Status SMART Hitachi HDS 721050CLA662 500 11 GB Hitachi HDS721050CLA662 500 11 GB Auto Mirroring a Disk Note The rebuild Auto Mirror function may take up to eight hours depending on hard drive size Share Management The Share function from the main menus provides access to folders The Share function allows access to Add Folder and Folder List Adding Folders You can create private
14. PM 9 Login User Name Password WAN Login The WAN connection is established giving you access to your OMNINAS 4 4 CONNECTING AN OMNINAS Adding a LAN Device Note OMNINAS For ANDROID To add a LAN device through the application you need to connect your OMNINAS through a switch or router See Connect to a Switch or Router 1 Tap OMNINAS on your screen A gt all 10 55 AM ti Ne OM NINA Selecting OMNINAS The Connection screen displays Og A ull Gl 10 56 am cloud test omninas net OMNINAS 3AD5E2 OMNINAS 41464f OMNINAS 41465A LAN Connection Screen 4 5 CONNECTING AN OMNINAS OMNINAS For ANDROID 2 Under LAN select a device from the available list This is the Host Name as define in Settings 3 The Login screen displays Enter the user name and password as defined in the Share 4 Click Login to continue or Cancel to return to the previous menu OA fA F Za 4 58 PM Login User Name Password Cancel LAN Login The WAN connection is established Your device is remotely connected to your Android phone See Main Menus 4 6 Main Menus OMNINAS For ANDROID Main Menus Functions on NAS List main screen include Previous Page Download Edit Add Folder and Se lect Op A Fi 11 16 AM SVEEN sansen LT Ey res contents iTunes DELTE NAS List Main Screen NAS List Main Screen Functions ICON ITEM DESCRIPTION
15. a backup schedule 2012 07 17 22 52 23 from disk to dev sdd1 2012 07 17 22 52 23 Start to backup 2012 07 17 22 52 22 Adding backup now settings completed 2012 07 17 22 52 18 USBidisk devw sddt Succeeded in doing a backup schedule 2012 07 17 22 52 16 from disk to dev sdd1 2012 07 17 22 52 16 Start to backup 2012 07 17 22 52 15 Adding backup now settings completed lt lt First Page Previous Page Next Page Last Page gt gt Modifying a Backup List To clear Backup Logs click Clear Backup Log System Configuration This section provides information and guidelines to specify network date and time settings re boot and power off reset to factory defaults and update your OMNINAS firmware Configuring Network Settings In the main menu under Settings click on Network to change the network configuration You are prompted to enter an OMNINAS name and Workgroup Assign a static IP address or select DHCP to allow your router to assign one Before beginning fill in the Name and Workgroup fields A suggested naming convention for the device name is to assign the name by the location or par ticular use for the OMNINAS device for example MediaNAS Music NAS or Family NAS The workgroup is a collection of computer on a defined network You will need to know the name of the specific workgroup to assign this name 3 35 SYSTEM CONFIGURATION Wes INTERFACE DHCP settings Note Your router must be DH
16. cause undesired opera tion Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation CAUTION Any changes or modifications not expressly approved by the guarantee of this device could void the user s authority to operate the equipment Vil CE compliance This device is classed as a technical information equipment ITE in class B and is intended for use in living room and office The CE and WEEE marks approve the conformity by the EU guide lines EMC guideline 2004 108 EC Directive on Electromagnetic Compatibility LVD guideline 2006 95 EC Directive on Low Voltage ErP guideline 2009 125 EC Directive on ecoconception of Energy related Products RoHS guideline 2002 95 EC Directive on Restriction of Hazardous Substances WEEE guideline 2002 96 EC Directive on The Waste Electrical and Electronic Equipment Safet
17. detected refer to How can I bypass the network setup check for further troubleshooting information 8 Ifthe device is detected select the device and click Connect 9 A browser window opens and a prompt displays instructions to add hard disks and shutdown the NAS device 10 Click the button to start and make sure the NAS device shuts down and powers off completely 11 Install your HDDs back in the drive bays 12 Power up the NAS device to and look to see if it is detected 13 If the device is still not detected please contact your Service Center http global shuttle com sup port I cannot map the network drive Ve 1 Use the delete network drive function to clean any conflicting or unused network drives in DOS box use net use delete command to clean up all network drives OR e Change the assigned drive letter in the map network drive function by clicking on the downward arrow next to the drive letter to open the drop down menu OR e Use the Finder utility to clean up all network drives 2 Then use the Finder utility to reconnect the Network drive s again 6 2 TROUBLESHOOTING TROUBLESHOOTING Q How can I bypass the network setup check A Ve To simplify the NAS device detection issue you can perform the following steps to make sure your unit is O K 1 2 3 4 5 Power down your device Directly connect the NAS device to your PC with a LAN cable Remove all HDDs from the NAS device an
18. functions Add Folder Folder List Add User and User List USB The USB menu provides access to the following functions Printer Setting and Auto Copy Backu The Backup menu provides access to the following functions Backup Log p Backup Setting List and Backup Setting The BT Download menu provides access to the following functions BT Down load and BT Setting bm BT Download Note BT Download and Media Server cannot be enabled at the same time To use one function the other must be disabled 3 1 OVERVIEW ICON a J ITEM Share Box Media Server Restart Shut Down Logout Wes INTERFACE DESCRIPTION The Share Box menu allows you to enable or disable the Share Box function Sharing is provided through the Your Host Name omninas net The Media Server menu allows you to enable or disable the media server function Note BT Download and Media Server cannot be enabled at the same time To use one function the other must be disabled Click to initiate a system restart procedure Note If a process is running restart is scheduled after completion of the current process Click to power down the system Click to log off the current user OVERVIEW Settings Menu Wes INTERFACE The Settings menu includes access to iTunes Server Network Date amp Time General About Log Factory Reset and Firmware Update You can use the Interface to configure your settings from a local or remote
19. location in LAN OMNINAS O Your Own Private Cloud English Storage Share s USB Backup gt BT Download Share Box a Media Server amp Settings Menu Settings OM ITEM iTunes Server Date amp Time About i og i 5 y OMNINAS KD20 Name OMNINAS 3AD5CD Workgroup WORKGROUP IP Address 192 168 1 37 Subnet Mask 255 255 255 0 Default Gateway 192 168 1 1 DNS Server 1 192 168 1 1 DNS Server 2 MAC Address 80 EE 73 3A D5 CD Firmware Version 0 30 20120709 Date and Time July 15 2012 06 56 32 PM Total Capacity 486 88 GB Available Capacity 486 88 GB iTunes Server on Media Server off Share Box off BT Download off Power Saving Time 10 Minutes Settings Menu DESCRIPTION Enable or disable the iTunes Server Enable the function to allow access on iTunes application Set device name assign a workgroup set to DHCP or manually assign an IP address Set the time zone assign a network time server or set your date time settings to mirror your browser Note System time is reset when the power adapter is disconnected Set the administrator password power savings time and interface coding page reference Display an overview of the OMNINAS settings and configuration information This function is for display only Note Admin account user name cannot be edited Display and clear all log entries 3 3 OVERVIEW Wes INTE
20. or public shared folders by using the folder share function Add Folder al lows you to create a new folder Public or private Add Folder wa FolderList 4AddUser fi Puser List Folder Name Description Share Attribute Public Private Valid User Save Cancel Share Adding Folder Screen 3 25 SHARE MANAGEMENT Wes INTERFACE To create a Public folder 1 In Share click on Add Folder tab Enter a folder name and description 2 3 Click Public under Share Access 4 Click Save You are automatically redirected to the Folder List and the new folder appears To create a Private folder md In Share click on Add Folder tab Enter a folder name and description Click Private under Share Access a Choose the level of access for each user E Add Folder wt Folder List 9AddUser User List Folder Name Foldertest2 Description Adding Folder Share Attribute Public Private Valid User User Name Full Access Adding a Private Folder 5 Click Save You are automatically redirected to the Folder List and the new folder appears Note Private folder default access for all users is None 3 26 SHARE MANAGEMENT Wes INTERFACE Viewing Folder Lists Folder List provides a view of all folders The Folder List allows you to Edit and Delete existing folders Ean Folder t Folder List add User i Puser List Folder Mame Public Action ef o oy a vs C
21. the interface 3 17 STORAGE MANAGEMENT Wes INTERFACE Disk Manager Menu Disk manager menu screen allows you to check the status of external and internal disks as well as viewing the formatted capacity of all available disks O lt Z Z D u Your Own Private Cloud English A Settings pa Storage Internal Disks Disk No Model Capacity GB Status SMART Action Hitachi HDS721050CLA662 500 11 GB GOOD ae Formatted Capacity Backup BT Download Share Box Media Server amp Occupied Array Formatted Capacity oO Capacity Type Total Available Status 0 SINGLE XFS 486 88 GB 486 88 GB ACTIV External Devices Action Manufacturer Device Capacity GB File Type Mount Action Disk Manager Interface Checking Disks IMPORTANT Checking disks unmounts a drive s Functions such as access auto copy and backup are not available Do not power off or reboot the system to prevent damage to your system Select Storage and click on the Disk Manager tab to view your available disks From this menu you can view the status and permissible tasks action for each HDD e See Status to view disk helath condition Empty disk unavailable good failed and mirror ing e See Action to view permitted tasks for a drive Internal Disks e Add disk adds access to the installed hard drive e Remove disk removes access to the installed hard drive Formatted Capacity e Ch
22. us Permanent Connect Alcome e Mapping an Individual Drive 2 22 CONNECTING THE OMNINAS GETTING STARTED 4 Click the Connect drop down menu to select a connection type Permanent temporary 5 Click Connect to establish the shortcut 6 To access and manage your mapped folders open the drive through the shortcut E Name Type Total Size Free Space 4 Hard Disk Drives amp Segate O5 C Local Disk 195 GB 88 8 GB G degate programs D Local Disk 270 GB 187 GB Ga Original os E Local Disk 76 3 GB 48 8 GB cog NTC Archived E Local Disk 116 GB 56 4 GB coy Drive 0 Local Disk 99 9 ME 46 2 ME coy Main Programs P Local Disk 416 GB 40 3 GB Mapped Individual Folder Note If your network is under a domain server mapping internal folders may require network ac cess and permission Deleting Network Drives The delete function allows you to remove already mapped network drives Close all folders asso ciated with the drives to make sure the delete function successfully removes the shortcut refer ence 1 Inthe OMNINAS Finder window select a NAS Device 2 Click Delete Network Drives IPv4 Address MAC Address Version Search OMNITest 192 168 1 33 80 EE 73 3A D5 CD 1 10 20120815 Connect Q Network Drives R Delete Network Drives Mapping All Folders The Resource Mapping table displays The table lists available OMNINAS folders drive let ters and
23. 4 1 OVERVIEW OMNINAS For ANDROID The Connection screen displays OB FA FX 4 57 PM omninas net Viewing the Help Menu 2 Push the Menu button on your device to display the following screen m X 1 3 17 PM mm AG cloud test omninas net Help About Clear cache Viewing the Help Menu 3 Tap on a menu selection to open the related information Help displays the OMNINAS application help documentation text format About displays the application version number and liscencing information Clear cache clears the accumulated software cache 4 2 CONNECTING AN OMNINAS OMNINAS For ANDROID Connecting an OMNINAS You can connect to your OMNINAS by one of two options WAN or LAN WAN uses the DDNS configuration to establish a connection LAN requires the OMNINAS to be under the same sub net as your current connection Adding a WAN Device 1 Tap OMNINAS on your device screen gt all 10 55am OM ININER Selecting OMNINAS The Connection screen displays OB A FX om 4 57 PM TO WAN Connection Screen 4 3 CONNECTING AN OMNINAS OMNINAS For ANDROID 2 Under WAN tap the open frame and enter the server name This is the Host Name as setup in Share Box 3 Click on the icon to add the device 4 The Login screen displays Enter the user name and password as defined in the Share 5 Click Login to continue or Cancel to return to the previous menu I FA FX 4 58
24. 5 18 06 55 2012 07 15 16 39 27 2012 07 15 16 39 19 2012 07 15 16 38 45 2012 07 15 16 38 36 BT download service has started Media server has been stopped Adding of new user has been completed test Updating current user s settings completed testuser Adding of new folder completed Foldertest2 Removing of folder completed Foldertest2 Adding of new folder completed Foldertest2 Rebuild default shared folders completed Stopping of Share Box completed Server error occured Removing of folder completed disk Media server has been started Adding of new folder completed Foldertest Adding of new user has been completed testuser Get IP address 192 168 1 37 from DHCP server System rebuild completed System is NAS Mode Get IP address 192 168 1 37 from DHCP server System is Booting Clear All Logs lt lt First Page Previous Page Next Page Last Page gt gt System Log Screen To clear the log history click on Clear All Logs in the Log tab 3 31 SYSTEM BACKUP System Backup Wes INTERFACE The Backup function allows you to view and setup backup schedules settings lists and logs Your Own Private Cloud Storage Backup BT Download Share Box a Share Box Media Server J t 2012 07 15 16 23 04 Succeeded in calibrating by NTP 2012 07 14 16 23 04 Succeeded in calibrating by NTP P Clear Backup Log lt lt Fir
25. CP enabled 1 In Settings click the Network tab 2 Click Automatically assign IP address DHCP to have your router designate an IP ad dress 3 Click Save to set the new configuration OMNINAS Your Own Private Cloud English x Settings pa gt Storage USB OMNINAS KD20 Name OMNINAS 3AD5CD Workgroup WORKGROUP Backup i ms Automatically assign IP address DHCP BT Download pr Manually assign IP address IP Address 192 168 1 37 Share Box ma Subnet Mask 255 255 255 0 Media Server Ju Default Gateway 192 168 1 1 DNS Server 1 192 168 1 1 i DNS Server 2 Setting Network Configuration Static settings manual Before you begin write down the new IP address subnet mask gateway and DNS settings to provide you with a reference after the system resets IMPORTANT Manually configuring the network settings will result in the system logging out You will need to wait for the system timeout function to expire 10 min before a login is possible 1 In Settings click the Network tab 2 Click Manually assign IP address DHCP to set the IP address 3 Enter the IP address Subnet Mask Default Gateway and DNS server settings 4 Click Save to set the new configuration 3 36 SYSTEM CONFIGURATION Wes INTERFACE Setting Date and Time Change the date and time by using the Date amp Time function Set Time Zone allows you to c
26. HDD temperature is higher than 62 C a 2 Make sure the NAS device fan is still functioning The fan is designed to cycle higher if the tempera ture is raises 3 NAS device does not support old HDDs without SMART temperature support SMART temperature required I think my USB port malfunctioned What can I do Make sure the USB devices hubs power usage is not over the specified maximum limit If necessary pro vide external power for high power demanding USB drive I cannot enter the administration page 1 Make sure the administrator profile is not in use a A 2 Log off the administrator profile or temporarily unplug the LAN cable 3 Wait for 10 minutes all previous access times out after 10 minutes 4 Reconnect the LAN cable then try to enter the administrator page again 6 1 TROUBLESHOOTING TROUBLESHOOTING Q cannot find my NAS device using the Finder tool A After you verify the LAN connection and setup on the PC Router side perform the following checks 1 Power down the OMNINAS 2 Remove both HDDs from NAS device 3 Power on the NAS device LAN cable must be connected to the PC Switch or DHCP Router 4 Check the power button LED status to see if boot up process is completed 2 5 minutes 5 Run the Finder program on your PC system Perform a search to check for your OMNINAS 6 If nothing the device is not detected reboot the NAS device once again 7 Ifthe device is still not
27. Hs a E E e a eee Q BT Setting JBT Download ea USB Download Time Settings Always Backup Daily Download Time Slot BT Download Share Box g Enable BT Download Media Server amp Selecting BT Downloads 2 Check Enable BT Download Note If you disable BT Download all downloads will become inaccessible After re enabling BT Download the downloads list becomes accessible 3 43 APPLICATION SERVICES Wes INTERFACE 3 In Download Time Setting select the option Always Daily Download Time Slot to desig nate when downloading can take place Always downloading can begin anytime GBT Setting JET Download Download Time Settings Always Daily Download Time Slot Enabling BT Downloads Daily Download Time Slot downloading can only take place during the designated time slot Select between from ScheduleA ScheduleB and or ScheduleC to setup the start and end time for downloading to take place GBT Setting CBT Download Enable BT Download Download Time Settings Always S Daily Download Time SI E Schedules 00 gt 100 00 100 El ScheduleB Start 00 00 End 00 00 El scheduleC 00 100 oo 00 Enabling BT Downloads 4 Select a specific time period and click Save to keep changes Before beginning downloads you can configure the settings for BT Download 3 44 APPLICATION SERVICES Wes INTERFACE Configuring Preferences BT Downloads allows
28. MENT Wes INTERFACE 3 Press the Hot swap button front panel until an audible beep sounds and the LED starts to blink See following figure Hot swap button Hot Swap Button Function Replace the drive Once inserted an audible sound alerts that the HDD is replaced The status LED flashes red After a short time the Status tab in Disk Manager detects and displays the new HDD sta tus To replace a drive using the Disk Manager menu 1 Log in to the OMNINAS web interface 2 Click on Storage gt Disk Manager to view your available disk drives 3 Select your target drive and click Remove Disk JAuto Mirror Disk Manager Manager Internal Disks Disk No Capacity GB fy Status SMART tj Action Hitachi HDS721050CLA862 500 11 GB move Disk Hitachi HDS721050CLA662 500 11 GB Hot Swap Through Disk Manager 3 20 STORAGE MANAGEMENT Wes INTERFACE 4 Andisk access warning prompt displays Make sure the Disk is not in use at this time then click OK The page at 192 168 1 33 says ER Removing disk during accessing may damage the RAID system re you sure you want to continue Hot Swap Through Disk Manager The status LED on the front panel flashes blue to indicate the on going process Once the LED displays solid blue the hard drive can be safely removed from the HDD bay 5 On the bay cover front panel press in the indicator to open the cover The cover pops open 6 Extend the
29. NNAS Media Box settings Settings Status Setup Shai myTwonky Library at NAS 41467 PM anng Version TwonkyServer Premium 7 1 1 fagregaton Videos 11 Songs 13 Photos 9 Advanced Activity Status Not streaming myTwonky com Your TwonkyServer is installed butis not connected to myTwonky com By registering you will get access to more features Register Server Detailed Status Media Server on Twonky Server 3 53 Chapter 4 OMNINAS for Android INSTALLING THE APPLICATION OMNINAS For ANDROID The Android OMNINAS application provides you WAN or LAN access to your OMNINAS device To begin using this function download the application and establish a connection to your device Installing the Application The OMNINAS application is available for download from your Google Play marketplace Select Google Play and serach for OMNINAS By downloading the application you can have acess to your shared media directly through your Android phone Note Before you can access the Android application you will need to setup Share Box in your OMNINAS and add at least one user profile Overview There is Help and About access from the main connection screen of the OMNINAS application A clear cache function is also available from this screen Note Availability to these menus varies from device to device 1 Tap OMNINAS on your device screen ea gt wil 10 55am lt a OM INTINTASS Selecting OMNINAS
30. OMNINAS Your Own Private Cloud User Manual OMNINAS KDEDR Shuttle www shuttle TABLE OF CONTENTS Product Overview Features 1 1 PERM 1 1 System RequirementS auannnnnnnannnnnnvennnnnnunnnunnnunnnunnnnnnnnre 1 2 Product Views 1 4 Front VICW ooer E E 1 4 ROCA EEE E EE 1 5 LED DENTON ene 1 6 Getting Started Hardware Installation 2 1 PSC INSE 0 EE EM 2 1 Connecting the OMNINAS 2 6 Connecting the Ethernet Port ararararunrnnnnaravnnenavnnrnunreravenen 2 6 Connect to a Switch or Router auunvnnnnnnnennnnnnenennnnnsnner 2 6 Connect Directly to a PC or Laptop cccceeee cece eee eeeeeeees 2 7 COMMECHNG LO POW EE nae 2 8 POET Nrk 2 9 Connecting Your OMNINAS ccccee ccc e ete e eset eeeeeeeeeeeeeneneees 2 10 FUN vr 2 11 System EN 2 12 Overview HOME MENU ccccccccccucccucuuucuueuuenunuuuuunennuuuneunennunugunnenuaanuues Settings Menu Storage Menu Share Menu USB Menu PP MN BT Download Me Nnu cceccccecececccucuccacacseunuavanusneuntanennnnegs Share Box Menu Media Server Menu Launching the Interface Logging In User Management Viewing User LISU ee Adding Users Editing Users Deleting VEN 3 14 Storage Management 3 15 RAID Manager vvrauvravevavenavenavennvnnavnnnvnnnvnvanvvnnvnnnvnnsvnravern 3 15 RAID NE 3 16 Creating a RAID MOde cccccseccecessucuvensucuvensuceeeneucurensues 3 16 DISK Manager MENU indsecntosnwensecsvtexiwasseiniens nis
31. OMNINAS By enabling this function clients in the same subnet can access the content through the iTunes application on their com puter 1 In Settings select the iTunes Server tab and click on to enable the iTunes Server service Select off to disable the service 2 Click Save to keep changes ml OMNINAS Your Own Private Cloud Settings pa E iTunes Server g R USB lt gt iTunes Server on off BT Download Share Box a Rescan Media Server amp iTunes Server Setting 3 On your computer open the iTunes application OMNINAS is available under the Shared library 3 42 APPLICATION SERVICES Wes INTERFACE 4 Click on your OMNINAS device In the selection list select a file to play File Edit View Controls Store Advanced Help iTunes oOo TE te Music je Name H Movies B v UNKNOWN 4 31 UNKNOWN UNKNOWN E Tv Shows V UNKNOWN 4 30 UNKNOWN UNKNOWN a Books Apps amp i Radio STORE f iTunes Store lt gt iTunes Match SHARED 17 OMNTTest Now Playi OMNINAS iTunes Service BT Download OMNINAS supports downloading of seed torrents By using BT Download you can add tasks and allow them to download through the OMNINAS IMPORTANT The BT Download function is only available when Media Server is disabled Setting Up BT Downloads 1 In BT Download select the BT Setting OMNINAS a Your Own Private Cloud English fr m A 4 a a
32. OMNINAS application for iOS based device l Local NAS List Edit i NAS sy Hostname gt RG A O O NAS List Main Screen Remote Connection NAS List Main Screen Functions ICON ITEM DESCRIPTION About Provides information on Version and License Help Provides general information on OMNINAS functions Advanced Change Manual Setup settings Local Link Connect to devices under the same subnet as your smart device Connect to devices through a remote connection Share Box service must be Remote Link enabled 5 1 CONNECTING TO Your OMNINAS OMNINAS For 10S Connecting to Your OMNINAS Adding a Remote Device To change Remote Link Setup settings from the NAS List main screen Tap Remote Link Ss at the screen bottom In My NAS enter the host name as registered in Share Box Services Username Password registered name password as a define user profile Enter the user name and password registered name and password for a defined user profile oe ll gt Tap Done to add the device You can Cancel to return to the NAS List Cancel OMNINAS Setup Done My NAS Username Password Q wje r r vjufrjo r Ajsjo Fje HjsjkjL Tee Adding a Remote Device The added remote device displays in the NAS list Local NAS List Qa INA W Hostname gt SS EG Available Remote Connections 5 2 CONNECTING TO Your OMNINAS OMNINAS For 10S Adding a Local Devi
33. RFACE ICON ITEM DESCRIPTION Reset OMNINAS to factory default settings IMPORTANT All data and settings are deleted Firmware Update Update device s firmware Home Click to return to the Home menu Logout Click to log off the current user Storage Menu OMNINAS Your Own Private Cloud Storage Current RAID Mode SINGLE 4 m B Backup EN 7 BT Download BB Share Box ai E Media Server amp SINGLE JBOD RAID 0 RAID 1 Single Disk Volume Linear Disk Volume Striping Disk Volume Mirroring Disk Volume Create Disk Array Storage Menu Storage Menu Settings ICON ITEM DESCRIPTION f ts Display current RAID mode Enable or disable the auto mirroring function available only in RAID 1 mode Auto Mirror Displays disk information and status active failed mirroring and mount or unmount an external drive for all internal or external USB drives 0 Disk Manager Displays the available disk capacity D Scan repair and format system disks Mount unmount and format external devices OVERVIEW Wes INTERFACE ICON ITEM DESCRIPTION Displays current RAID mode and set RAID mode type single JBOD RAID 0 or RAID 1 Note Only RAID 1 provides auto mirroring function O a am Logout Click to log off the current user RAID Manager Home Click to return to the Home menu Share Menu oan
34. a Factory Reset the Share Box and share account must be re configured e If the firmware is updated or the OMNIANS had a sudden loss of power re register the Share Box set tings to ensure a remote connection e If your router or cable ADSL modem were or power cycled re register the Share Box settings to en sure a remote connection 6 3 ENVIRONMENTAL CONTROL TROUBLESHOOTING Environmental Control System Temperature The OMNINAS has a built in feature to protect against damage from overheating The following criteria sets off a shut down instance System temperature exceeds 65 C 149 F System Fan Settings By default the fan is not activated under normal temperature conditions as defined by the HDD temperature reading from HDD SMART function The following criteria depicts the system fan behavior e Normal conditions Fan is off e 55 C to 59 C Fan is active in low speed e 60 C to 61 C Fan is active in middle speed e 62 C and above System shuts down 6 4
35. and Remote Access Requirements e Internet connection e Universal Plug and Play UPnP compatible router or administrative rights to port forward e Recommended minimum sustained connection speeds for a good Personal Cloud experi ence e Download 2 5 Mbit s recommended e Upload 500 Kbit s recommended 1 3 PRODUCT VIEWS PRODUCT OVERVIEW Product Views Front View OMNINAS Front View Front View Identification ITEM DESCRIPTION 1 Power Button 2 Status LED see LED Definitions HDD removal buttons 2 HDD2 1 HDD1 Note For RAID 1 configuration only 4 HDD tray release 5 USB 3 0 auto copy supported only through this port 6 SD card reader auto copy supported only through this port 7 HDD bay HDD1 is on the right and HDD2 is on the left 8 Bay cover 9 LED indicators see LED Definitions 1 4 PRODUCT VIEWS PRODUCT OVERVIEW Rear View 3 1 4 2 5 OMNINAS Rear View Rear View Identification ITEM DESCRIPTION 1 DC IN power jack 2 Reset button 3 K Lock security slot USB 2 0 x2 4 X port 2 is in the upper position port 3 is in the lower position 5 LAN Port 1 5 PRODUCT VIEWS PRODUCT OVERVIEW LED Definitions The OMNINAS comes with six LED indicators five in front and one in back See the following table for behavior and location descriptions Rear E Oo Q LED Indicators on Front Panel LED Definitions ITEM NAME CoLOR CONDITION DESCRIPTION System
36. ce Note To add a local device through the application you need to connect your OMNINAS through a switch or router See Connect to a Switch or Router To change Auto Setup settings from the NAS List main screen You can connect to your OMNI NAS by WAN or LAN The LAN option provides a list of available devices under the same subnet as your current smart device Local NAS List Eat Coe ae gt a i NAS List Screen 1 Tap Local Link on the screen bottom 2 The Auto Setup screen displays Select an available device Auto Setup Select Connection OMNINAS 3AD5E2 OMNINAS 41465A OMNINAS 41464f OMNINAS Test Selecting a Local Connection 5 3 CONNECTING TO Your OMNINAS OMNINAS For 10S 3 Inthe Login pop up enter the user name and password as defined in the Share IMNINAS Test ul Local Login Screen If the connection is established the selected device displays a tick next to it Auto Setup Done Select Connection OMNINAS 3AD5E2 OMNINAS 41465A OMNINAS 41464f OMNINAS Test V Successful Login CONFIGURATION OMNINAS For 10S 4 Tap Done to continue The new connection is listed under available NAS devices Local NAS List Edit lt M OMNINAS Test gt Available Local Connections Configuration To change Manual Setup settings from the NAS List main screen 1 Tap Advanced at the screen bottom 2 Enter informat
37. ck All Connect to select all the available folders The connection process continues Once the folders are successfully mapped to your com puter the status Resource Mapping Table for the folders displays Connected 6 To access and manage your mapped folders open the drive through the mapped shortcut Name Type Total Size Free Space 4 Hard Disk Drives A Segate 05 C Local Disk 195 GE 88 8 GB Sa Segate programs D Local Disk 210 GB 187 GB Sa Original os E Local Disk 76 3 GB 48 5 GB co NTC Archived E Local Disk 116 GB 56 4 GB g Drive 0 Local Disk 99 9 MB 46 2 MB coy Main Programs P Local Disk 416 GB 40 3 GB 4 Network Location EP iTunes 192 168 1 33 T Network Drive 464 GB 348 GB Mapping an Individual Folder Note lf your network is under a domain server mapping internal folders may require network ac cess and permission Map Individual Drive 1 In the OMNINAS Finder window select a NAS device 2 Click Map Network Drives The Resource Mapping table displays The table lists available OMNINAS folders drive let ters and connection type 3 Select a folder to map and click the Drive drop down menu to select a drive letter Resource Mapping Table a Folder Ba 1192 168 1 35 usbdisk 10 1 1192 168 1 33 Tunes Temporary Connect 192 168 1 33 disk 192 168 1 33 Private 1 X Permanent Connect 1192 168 1 33 Folder 1
38. connection type 2 23 CONNECTING THE OMNINAS GETTING STARTED 3 Select a folder to unmap and click Delete Resource Mapping Table Folder 1192 168 1 33 usb isk 11192 168 1 53 Tunes Mapping an Individual Folder The mapped drive is removed from the network Note An open mapped folder prevents the deletion of a mapped drive Close your Explorer and iTunes windows for deletion of mapped drives to function 2 24 Chapter 3 Web Interface OVERVIEW Wes INTERFACE Overview The OMNINAS Web Interface allows you to configure your personal settings through a web browser The Interface includes access to Settings Storage Share USB Backup BT Download Remote Access and Media Service You can use the Interface to manage your devices from a local device must be under same subnet as OMNINAS or remote location Home Menu ag og pene English v c oo amp Settings Storage Share a pa u Backup BT Download Share Box Media Server Restart Shutdown Administrator Home Menu Home Menu Settings ICON ITEM DESCRIPTION The Settings menu provides access to the following functions iTunes Server gt Settings Network Date amp Time General About Log Factory Reset and Firmware Update a The Storage menu provides access to the following functions Auto Mirror Disk Storage Manager and RAID Manager Share The Share menu provides access to the following
39. cover to allow access to the HDD trays 7 Pull the tray release to unlock the hard disk tray An audible sound alerts that the HDD is undocked Tray release HDD Tray Released Replace the drive Once inserted an audible sound alerts that the HDD is replaced The status LED flashes red After a short time the Status tab in Disk Manager detects and displays the new HDD sta tus 3 21 STORAGE MANAGEMENT Wes INTERFACE Replacing a Drive For RAID modes Single JBOD RAID 0 and RAID 1 you can replace disks by shutting down the device IMPORTANT The formatting process deletes any data on the disk Make sure you backup your data be fore proceeding Do not power off or reboot the system to prevent damage 1 On the bay cover press in the indicator to open the cover The cover pops open 2 Extend the cover to allow access to the HDD trays 3 Pull the tray release to unlock the hard disk tray The HDD slides out if undocked Tray release HDD1 Tray Released 4 Grasp the tray and slide it out of the bay 3 22 STORAGE MANAGEMENT Wes INTERFACE Formatting Disks The Format function allows you to format a disk IMPORTANT The formatting process deletes any data on the disk Make sure you backup your data be fore proceeding Do not power off or reboot the system to prevent damage 1 Click on the Disk Manager to view your available disks 2 Select a drive In the Action column click Format Int
40. cted Blue Solid on HDD access Blue Blinking Audible Beep RAID1 selected audible beep x 1 p HDD1 status Red Solid Failure Red Blinking HDD1 rebuilding Off Not detected On Rear SIDE Green Solid on Link speed is 100 Mbits sec 6 LAN Speed LED Amber Solid on Link speed is 1000 Mbits sec Off Off or link speed is 10 Mbits sec Green Solid on LAN link 7 Re Green Blinking LAN access LED Off Disconnected 1 7 Chapter 2 Getting Started HARDWARE INSTALLATION GETTING STARTED Hardware Installation This section includes information to help you install the hard drives in the OMNINAS before you can begin using your storage device First Instance The following guidelines provide information for first time installation of your OMNINAS Before you can get started on the configuration and setup you will need to install hard drives on your device IMPORTANT To prevent data loss or damage to the system power down your device before removing a HDD 1 If your system is not powered down press the Power button for three 3 seconds until an audible beep sounds and the LED starts to blink 2 On the bay cover press in the indicator to open the cover The cover pops open 3 Extend the cover to allow access to the HDD trays Opening the HDD Bay Door 2 1 HARDWARE INSTALLATION GETTING STARTED 4 Pull the tray release to unlock the hard disk tray The HDD slides out if undocked Tray release
41. cted folder Once connected you can Map Network Drives access the shortcut from your computer or Windows Explorer Delete Network Drives Click to delete the selected network shortcut mapped folder About Click to view OMNINAS Finder Utility information display purposes only Help Click to open a browser window displaying the OMNINAS help menu Exit Click to exit the OMNINAS Finder Utility OMNINAS Finder utility is used to detect devices on the local network Same subnet or to directly access your device through a web browser See Connecting by Web Browser 2 11 CONNECTING THE OMNINAS GETTING STARTED System Initialization Linux users go to Connecting by Browser to continue the setup process Windows and Mac users follow the information provided in the following section to continue the setup process 1 Insert OMNINAS CD ROM into your CD drive Note Windows 7 users may get an AutoPlay prompt as follows Select Run OMNINAS Finder exe to continue the process 3 AutoPlay D DVD RW Drive F OMNINAS E Always do this for software and games Install or run program from your media G r GF Publisher not specified ENE General options b Open folder to view files using Windows Explorer View more AutoPlay options in Control Panel Windows 7 AutoPlay Prompt Note If the selected language in the Setting Language does not match your computer system s settings the OMNINAS Finder Utility rever
42. d event is currently running the backup function begins once the scheduled event is completed Home Click to return to the Home menu Logout Click to log off the current user 3 OVERVIEW Wes INTERFACE BT Download Menu Sor Private ud om ST Sett a BT Download Storage USB Inspector Ag OTransfers 4 Obytes s t 0 bytes s Backup BT Download Share Box a Media Server amp BT Download Menu BT Download Menu Settings ICON ITEM DESCRIPTION The BT Setting menu allows you to enable or disable the BT Download func tion Set general and specific downloading settings always scheduled Note BT Download and Media Server cannot be enabled at the same time To use one function the other must be disabled 2 N BT Download Menu Select files to upload set preferences download and upload rates and manu fm erur ey SONN pai ally control the download functions Home Click to return to the Home menu Logout Click to log off the current user OVERVIEW Wes INTERFACE Share Box Menu OMNINAS a Your Own Private Cloud English Cea Share Box Setting Storage Share Box on off USB amp Host Name omninas net Backup Password BT Download Password Confirm Share Box d Port 3000 UPnP Support yes No Media Server Share Box Menu Share Box Menu Settings
43. d power up The NAS power button LED flash red continuously after a brief period 1 to 2 minutes Run the Finder utility on your PC system and perform a search for the connected device If the device is not detected proceed with the following Open a supported browser and type http 169 254 100 200 to directly connect to the NAS administra tor page If there is no response on your PC open a command DOS dialog window and type the following ping 169 254 100 200 If the ping command returns a timeout message contact your distributor for further troubleshooting support If the ping command returns a positive connection response open a different browser and go to step 6 10 If the device is detected through the browser but not the Finder utility re install the Finder and go to step 4 11 If the device is detected by using the Finder utility and browser and the administration page is acces sible access to the network is still not available check your network settings and make sure your PC and NAS device are in the same LAN network Cannot connect to a Remote Access 1 Router Setting e Make sure your Share Box port settings 3200 6400 do not conflict with your router settings If the port settings do conflict change your Share Box port setting e The OMNINAS and router do not have more than one layer connection between them OMNINAS setting e Make sure the Hostname has not already been registered e After
44. d time zone Language English Time zone Taipei GMT 08 00 Next Step Step1 Language and Time Zone Screen 2 14 CONNECTING THE OMNINAS GETTING STARTED Step 2 Adminstrator Account Enter a password for OMNINAS adminstrator account This is used for logging in OMNINAS management page Adminstrator Account admin Adminstrator Password 290004 Please enter 6 16 characters You may use English letters Capital or lowercase letters numbers and special characters Re confirme your password 290004 Next Step Step2 Adminstrator Account Screen Step 3 Create OMNINAS Set up a OMNINAS name and register Share Box o OMNINAS Mame nastest Please enter 6 16 characters You may use English letters Capital or lowercase letters numbers and special characters Internet Status Connected Share Box hitp nastestomninas net 3200 Step3 Create OMNINAS Screen 2 15 CONNECTING THE OMNINAS GETTING STARTED Step 4 Share Media Files Turn on below service to share your media files A Media Server iTunes Server Media files are placed in the disk folder Media files are placed in the iTunes folder Manual synchronization Manual synchronization Every 30 Minutes Auto Every 30 Minutes Auto synchronization synchronization Next Step Step4 Share Media Files Screen Step 5 Create a RAID Disk Select a desired RAID mode Current
45. e Name 2 Inthe Device Name field type in the host name as set in the Share Box setting See Share Box 3 50 APPLICATION SERVICES Wes INTERFACE 3 Click Connect to continue The Share Box connection page displays see the following figure OMNINAS are Box L Thumbs Log in No Repository im gt Filename Size Type Modifie l Connect to AjaXplorer Enter login password Login Password K E Remember Me Share Box Login Screen 4 Enter the Login and Password of a profile defined in Share Management See Adding Us ers Additionally you can login to Share Box by typing in the hostname and assigned port num ber see following exmample hostname omninas net 4321 Whereas the information in represents your device set tings After a successful login your OMNINAS device and the shared contents are displayed See following figure i OMNINAS Share Box 2 od E L o gt oe x G Parent Refresh Thumbs Upload New Dir Rename Copy Move Delete Log out disk i il contents imal iTunes Filename Modified in contents 4 KB Directory 2012 08 27 09 58 Directory 2012 08 27 09 59 Share Box Connection Screen 3 51 APPLICATION SERVICES The following is a description of the menus found on the remote Share Box menus Share Box Remote Access Screen GI rh 3 EGP E gt Note ITEM Parent Refresh Thumbs Upload N
46. e function installs to Facebook automatically if not already installed 7 Your photo is posted on Facebook 5 9 Chapter 6 Troubleshooting TROUBLESHOOTING TROUBLESHOOTING Troubleshooting In the event of hardware or interface issues the following information is provided to assist in solving most issues There are also resources and further information available for users on the following website Please feel free to use this resource and to contact the Shuttle support team if necessary OMNINAS website http global shuttle com main index Q I forgot the administrator username or password A e Use a long thin pin to press the reset button on the back of NAS device See Reboot the system e Use the default user name admin password no password to enter the administrator mode Q I cannot find NAS device after configuration A Perform the following 1 Unplug the LAN cable then connect it back Go to step 2 if the issue is not resolved 2 Set your PC TCP IP settings to DHCP to obtain an automatic IP address 3 Press the power button for four 4 seconds to shutdown the NAS device Wait for a complete system shutdown 10 seconds then press the power button again to reboot the OMNINAS This procedure should allow you to set the OMNINAS and your PC on the same network group My NAS unexpectedly shutdown What s happening 1 Make sure the NAS device is in a well ventilated area the NAS device will shut down when the
47. eck disk verifies integrity of selected disk STORAGE MANAGEMENT Wes INTERFACE e Format erases all data and prepares HDD directory structure External Devices e Mount allow access to the disk image e Unmount remove access to the disk image e Format erases all data and preapares HDD directory structure e See Formatted Capacity to view total and available disk capacity for a particular drive Internal Disks Disk No Capacity GB Eh Status S MLA R T Gi Action Occupied Formatted Capacity E Capacity Total Available Status EN 456 858 GB 486 88 GB ACTIVE Action External Devices Manufacturer Device Capacity GB File Type Mount Checking Disk Function Disk Mangement Disk removal is simple and easy To accommodate the varying RAID types hot swap and non hot swap disk removal is designed into the OMNINAS Replacing a Hot swap Drive You can replace a hot swap drive RAID 1 mode only by using the hot swap button found on the front panel or through the Disk Manager menu on the OMNINAS interface IMPORTANT The formatting process deletes any data on the disk Make sure you backup your data be fore proceeding Do not power off or reboot the system to prevent damage To replace a drive using the Hot swap button 1 On the bay cover front panel press in the indicator to open the cover The cover pops open 2 Extend the cover to allow access to the HDD trays 3 19 STORAGE MANAGE
48. ed 1 Tap and hold on any photo file bid 4 Aton LanSetting jpg 2 bas 5 Aton ShutdowReboot jpg 2 6 Aton DiskManager jpg Aton Users jog pa I 4 Selecting a Photo File 2 Ascreen pops up 3 Tap Share by Facebook to open the Facebook login screen A MOA 5 28PM Menu Share by Email Share by Facebook Sharing a Photo File 4 11 PHOTO FILES OMNINAS For ANDROID 4 Log in to your Facebook account to continue Note Facebook share function installs to FB automatically if not already installed B MO gt A 5 29PM f Facebook facebook You must log in first Get Facebook for Android and browse faster Email or Phone Password TES Forgot password in Tru tho sltarnatnia lain reuihle Lee Logging In to Facebook 5 After a successful login your photo is posted on Facebook VIDEO FILES Video Files To open Video files 1 From the NAS List main screen tap on Video 2 Tap any sub folder to view the files if needed 3 Tap on any file to play automatically Av MO gt A gt 5 31PM android video MPEG4 SP O OOOO I Bird On Aware SQCIF 5fps mp 52k amr nb 12k mp4 DELTE Opening Video Files OMNINAS For ANDROID Music FILES OMNINAS For ANDROID Music Files To open Music files 1 From the NAS List main screen tap on iTunes 2 Tap any sub folder to view the files if needed 3 Tap on any file to play automatica
49. elected changes cJiTunes Sever Network Date amp Time kj General About Log Factory Reset Firmware Update 18 Jul 2012 18 30 41 Time Zone SetTime Zone Taipei GMT 08 00 Set system clock using network time server NTP NTP server 1 ntp nict jp NTP server 2 B o Calibration Daily Date and Time Set Time from Browser Date 201 2 07 18 Time 18 al 30 36 System time will be reset if power adapter is unplugged Set Time from Browser Settings Rebooting and Powering Off Reboot the system 1 Click Home to return to the home menu 2 Onthe home menu click Restart to reboot the system o Your Own Private Cloud English Settings Storage Share a ag USB Backup z BT Download Share Box Media Server FU Shutdown Administrator Home Menu 3 38 SYSTEM CONFIGURATION Wes INTERFACE Power Off The powering off function is activated through the web interface or by pressing the power button Web interface 1 Click Home to return to the home menu 2 Onthe home menu click Shut Down Power button On the front panel press for three seconds The system beeps and begins the powering off process the LED starts to blink blue may take 1 2 minutes Reset to Factory Default Reset function sets the administrator user name and password and all stored data to factory de faults Make sure you backup your data before proceed
50. ernal Disks Disk No Capacity GB tj Status 5 MLALR T FjAction Hitachi HDS721050CLA662 500 11 GB GOOD me Rud emery ooo Formatted Capacity Occupied Array hin Formatted Capacity Er ol ei Action Cay ko GE Total Available Status SINGLE 486 88 GB 486 88 GB ACTIVE Format External Devices Manufacturer Device Capacity GB File Type Mount Checking Disk Function 3 Aprompt displays to confirm click OK to continue The process continues When it is complete the Disk Manager screen displays 3 23 STORAGE MANAGEMENT Wes INTERFACE Auto Mirroring By using RAID 1 you can duplicate data between two hard drives A minimum of two HDDs are required for auto mirroring RAID 1 The Auto Mirror function allows you to enable or disable the Auto Mirror function available for RAID 1 mode A second hard drive must be installed to enable the auto mirroring function See Disk Mange ment Note Auto mirroring is only available for RAID 1 mode Depending on the formatted capacity of RAID 1 the rebuilding of your second drive for mirroring may take several hours Do not turn off the power or interrupt the system during this process to prevent damage to the system or your hard drives The auto mirroring setup will erase the hard drives data Make sure you backup all data before starting this process To enable Auto Mirroring 1 After installing the hard drives make sure your OMNINAS is powered on
51. ers It is not case sensitive and supports double byte characters such as those from Chinese Japanese and Korean types Invalid characters are listed below INE 7 lt gt 3 12 UseER MANAGEMENT Wes INTERFACE Password Case sensitive and supports a maximum of 16 characters A password of at least 6 characters is recommended Your Own Private Cloud Storage Share sm User Name Description Password Backup BT Download Password Confirm Share Box a Hl I Media Server J k Share Add User Screen 1 Click on the Add User tab to add a user 2 Fill in the information and click Save The Save function redirects you back to the User list tab The new added user appears on the list User Name Description adding user Password Password Confirm Adding a User Note Users do not have administrator privileges UseER MANAGEMENT Wes INTERFACE Editing Users Storage User Name Description Action a m USB 3 s gt gt At lt I en 5 Backup BT Download Share Box l Media Server _sju Editing a User 1 Click the User List tab to view a list of available users 2 Select a user and click Edit to modify A prompt displays edit the desired fields 3 Click Save to complete changes or Cancel to go back to the User List Note User names cannot be modi
52. ew Dir Download Rename Copy Move Delete Logout DESCRIPTION Click to navigate to the parent folder Click to refresh the screen Click to set the current folder view settings to Thumb icon view Click to upload the selected file Click to create a new directory in the current selection Click to download the selected file Click to rename the currently selected file Click to duplicate the currently selected file Click to move the currently selected file Click to delete the currently selected file Click to log off the current user Some menu items are only active after selecting a file or image Setting Up Media Server Media Server on the main menu provides access to this function s settings IMPORTANT Disable BT Download before setting up Media Server Both applications can not run con currently 1 Select Media Server and click on next to Media Server 2 Click Rescan to update and verify the new setting 3 52 Wes INTERFACE APPLICATION SERVICES Wes INTERFACE 3 Click Save to keep changes You can also click off to disable Media Server eee u Your Own Private Cloud 63 Media Server Storage Media server Oon JO off USB amp Go To Backup BT Download Share Box ww Media Server M Setting Up Media Server The following image displays an active OMNINAS Media Server in a Twonky Server screen INAS VIDEO MUSIC PHOTO i OM
53. fied Deleting Users Storage User Name Description Action USB lt Backup BT Download Share Box us 3 CS 3 ad d lt h ie Ke Media Server J L Deleting a User 1 Click the User List tab to view a list of available users 2 Select a user and click Delete to remove the user A confirmation prompt displays 3 Click OK to delete or Cancel to go back to the User List 3 14 STORAGE MANAGEMENT Wes INTERFACE Storage Management RAID Manager The Storage function on the main menu provides access to configure and manage your available storage The Storage function allows access to RAID Manager Disk Manager and Auto Mirror to monitor and change the RAID array on the OMNINAS MNINA English Your Own Private Cloud English z dT 3 RAID Manager Storage Current RAID Mode SINGLE 4 fj s f vw N Backup am ED D ee BT Download ED Hao E ED R Hoa G E Share Box gig mm nm md Media Server B g 7 SINGLE JBOD RAID 0 RAID 1 Single Disk Volume Linear Disk Volume Striping Disk Volume Mirroring Disk Volume Create Disk Array Storage RAID Manager Screen STORAGE MANAGEMENT Wes INTERFACE RAID Types RAID Types Defined Mope DESCRIPTION Single A single hard drive is used All data is lost in the event of a hard drive failure RAID functionality is not available in JBOD Just a Bunch of D
54. he password again in the Password Confirm field 3 48 APPLICATION SERVICES Wes INTERFACE 5 Set the Port Default 3200 forwarding number The port setting ranges from 3200 to 6400 Share Box Setting Share Box on off Invalid host name or password Host Name nastest i omninas net Password logen i Password Confirm UPnP Support ves No Configuring Share Box Settings IMPORTANT Make sure the port is open if you select a non default port number The port must forward to the fixed LAN IP of the OMNINAS so that connection to the Share Box service is possi ble Make sure the port is open if you set a nondefault port number 6 Click Save to register The following message displays after a successful registration pro cess Share Box Configuration 3 49 APPLICATION SERVICES Wes INTERFACE Accessing Share Box Share Box keeps your shared files and media ready and available through any Internet connec tion Simply login and get access to all your shared folders Note To use Share Box first create a user The user name and password is used to log into the function 1 Open a browser page and enter the following address http www omninas net The following screen appears Shuttle 7 S C ff www omninas net ke q OMNINAS Your Own Private Cloud Device Name myn Connect Enter Your Devic
55. hoose from a list of locations Set the date and time either through the network time server NTP or from a browser To set a Network Time Server NTP 1 Select Settings and click the Date amp Time tab 2 Select Set system time server NTP 3 Enter the URL address of your selected NTP server s in the NTP server 1 2 fields 4 Check Calibration to calibrate Daily Weekly or Monthly 5 Click Save to keep selected changes nw OMNINAS A Your Own Private Cloud English EP Storage OE 16 Jul 2012 08 26 50 U SB Time Zone SetTime Zone Taipei GMT 08 00 4 Backup Set system clock using network time server NTP BT Download NTP server 1 ntp nict jp Share Box ww NTP server 2 gt Calibration Daily Media Server amp 7 Date and Time Set Time from Browser Date 2012 07 16 Time 08 v 26 49 v System time will be reset if power adapter is unplugged Date amp Time Settings Click Date and Time to set time from the browser 1 Select Settings and click the Date amp Time tab 2 Select Date and Time 3 Click Set Time from Browser to automatically update Date and Time O 4 Enter the Date by clicking on the drop down menu and selecting the date 5 Set the time by selecting the Hour Minutes and Seconds using the drop down Time men US 3 37 SYSTEM CONFIGURATION Wes INTERFACE 6 Click Save to keep s
56. in booting sequence Blue Blinking Audible Beep System in shut down sequence audible beep x 1 Blue Solid on Audible Beep System boots successfully powered on System fails to boot Red Blinking Audible Beep Audible beep x 3 Status LED System fails to acquire IP address Red Blinking Audible Beep Audible beep x 3 System in power savings mode Power Blue Pulsing saving time setting is adjustable in Set tings General menu 1 Off Blue Blinking Web Ul in booting sequence Web Ul LED status Blue Solid on Audible Beep Web UI is available Red Blinking Audible Beep Web UI failure audible beep x 3 Blue Solid on Audible Beep Backup successful audible beep x 3 Backup status LED Red Blinking Audible Beep Backup failure audible beep x 3 Blue Solid on Audible Beep Copy successful audible beep x 3 Auto copy status LED Red Blinking Audible Beep Copy failure audible beep x 3 Reset status Blue Blinking Audible Beep Reset in progress audible beep x 1 Blue Blinking Solid on Active auto copy access 2 SD card status Off 1 6 PRODUCT VIEWS PRODUCT OVERVIEW ITEM NAME COLOR GONDITION DESCRIPTION Blue Solid on Plugged in printer connection 3 USB status Blue Blinking Solid on Active auto copy access Off Blue Solid on HDD access Blue Blinking Audible Beep RAID1 selected audible beep x 1 4 HDD 2 status Red Solid Failure Red Blinking HDD2 rebuilding Off Not dete
57. ing with this function IMPORTANT Web interface reset function will erase all data and preconfiguration settings Web Interface Reset Click on Factory Reset to restore factory default Mtns Your Own Private Cloud English A Storage USB Caution 4 Press Reset will erase all data and settings Backup 4 Please make sure all data has been backed up BT Download Share Box aw Media Server amp Factory Reset Screen 3 39 SYSTEM CONFIGURATION Wes INTERFACE Hardware Reset Hardware reset is available to clear the administrator username password and restore the net work setting default DHCP Automatically assign IP address profiles This procedure does not delete the data from the hard disks Make sure the OMNINAS is powered on before starting a hardware reset 1 Locate the Reset button on the back of the device 2 Insert a thin tool and press the button in for three seconds Reset Button Location 3 After a beep sounds release the button The system reboots 4 Log in at this time See Connecting Your OMNINAS Updating Firmware Firmware Update provides an easy method to update the system s firmware CAUTION Do not power down or disconnect the power cord during a firmware update to prevent dam age to the system Before you begin download the latest firmware from the following site http global shuttle com download download From the support site se
58. ion as needed 3 Tap Done and OK to complete changes or Cancel to return to the NAS List Cancel Manual Setup Done oF My NAS Host Name Port No 3000 Username e wje rit vju ijojr Al sjo Fje HjsjkjL H0G0000 Changing Manual Setup Settings 9 5 OPENING DOCUMENT FILES OMNINAS For 10S Opening Document Files To open any document files 1 From the NAS List main screen tap on a document file 2 Tap any sub folder to view the files if needed 3 Tap on any file to view automatically doc test Edit a 1 1 ppt 2011 02 16 18 19 59 854 KB 2011 1021 1604 06 jpg 2011 10 21 16 04 56 286 KB w002 taipei doc gt 2011 02 16 18 39 59 268 KB Multimedia Comparison xIs gt 2007 05 14 08 45 18 36 KB ex001_spring 1 xls gt 2011 02 16 18 37 57 34 KB Oo Q Opening a Document File Note Clicking on Edit allows you access to Rename Copy Move and Download functions VIEWING Movie FILES OMNINAS For 10S Viewing Movie Files To open any Movie or Video files 1 From the NAS List main screen tap on a video file 2 Tap any sub folder to view the files if needed 3 Tap on any file to play automatically 4 Tap Done to return to menu Computex 2012 06 04 11 27 35 4 KB Q __ DKR R ET HERE Ice Age 4 MENA 8 mpa MOVIE 201 2 06 04 1 1 27 52 4 KB N 2012_0604_1200_32 jpg 2012 06 04 12 00 42 618 KB Q Product Video avi woe 2012 05 29 11 51 42 8 1 MB Product Video mp4
59. isks mode Data is written sequentially on the designated disks Both hard drives are combined to form a single larger disk JBOD Note If you are using two identical HDDs it is recommended to use RAID 0 Both hard drives are combined and the available capacity of each disk is added into a single logical volume Redundancy or parity is not available RAIDO offers the best perfor mance however there is no disk failure protection RAID 0 IMPORTANT If a single disk in RAID 0 fails the data in both disks is inaccessible due to the RAID 0 cross disk writing function Dual hard drives are required RAID 1 is a secure mode providing mirroring functionality The data is duplicated between both HDDs and in the event of a single disk failure the data is available in the healthy disk RAID 1 is recommended for disk failure protection RAID 1 However available disk space is reduced by 50 due to the mirroring function Only RAID 1 supports hot swap functionality All other modes require you to power down the device before removal of hard drives IMPORTANT Changing RAID types erases all data stored on your storage disks If there is saved data on the drive s backup your data before proceeding IMPORTANT Only RAID 1 supports hot swap functionality All other modes require you to power down the device before removal of hard drives The Disk Manager function displays model capacity and status of the available hard drives You can view
60. lect your OMNINAS type and select your respective firmware update Download it to a local folder The firmware file is packaged in a compressed format It is not nec essary to unzip the file 3 40 SYSTEM CONFIGURATION Wes INTERFACE 1 In Settings select the Firmware Update tab click Browse to select a firmware image pre viously downloaded from Shuttle support A Windows Explorer window opens 2 Navigate to the folder containing the new firmware Select the new firmware and click Open 3 Click Update to begin the update process yer man MNINAS Your Own Private Cloud Settings pa Storage Current Firmware Version 0 30 20120709 Backup BT Download Click Browse to select the correct firmware image Click Update to upload the firmware then begin the update process U Share Box aw poate Media Server amp Firmware Updating Screen If the selected firmware image is older or the same version as the current firmware a prompt displays to confirm the updating Note Do not uncompress new firmware files The packaged file is required for the update firm ware procedure 3 41 APPLICATION SERVICES Wes INTERFACE Application Services Application services provide you with access to specific applications including iTunes Server BT Download Remote Access and Media Server iTunes Server The service provides access to the iTunes folder on the
61. les You can use Backup Settings List to edit or delete current backup schedules in the task list 1 Click Edit on a backup schedule The Backup Setting screen displays Backuplog Backup Setting List Backup Setting Delete the whole list Backup Backup Destination Weekdays Hours Minutes Status Action Source Ban USB HDD usbdisk i une Modifying a Backup List 2 Modify the schedule and click Save Backup Setting A beep sounds and an Update Settings Completed prompt displays The task is complete Deleting Backup Schedules 1 Click Delete from the Action list to delete a scheduled backup 2 Aconfirmation prompt displays click OK to delete or Cancel to return to the Backup Set ting List Or 3 Click Delete the whole list to delete all scheduled backups A confirmation prompt displays click OK to delete or Cancel to return to the Backup Set ting List Backup Log 6 Backup Setting List F Backup Setting Delete the whole list Backup Backup Destination Weekdays Hours Minutes Status Action Source USB HDDusbdisk y 7 ER Modifying a Backup List 3 34 SYSTEM CONFIGURATION Wes INTERFACE Viewing Backup Logs To view a history list of backup tasks select Backup Log tab Use the First Page Previous Page Next Page or Last Page to cycle through your history list E Backup Log Backup Setting List Backup Setting 2012 07 17 22 52 24 USB disk dewsdd1 Succeeded in doing
62. lly J 01 Highway Star mp3 A 01 Hotel California mp3 2 01 If You Leave Me Now mp3 SZ 01 Seven Bridges Road mp3 2 Opening Music Files 4 14 TORRENTS OMNINAS For ANDROID Torrents BT files are only available after a sucessful download of the file To open Torrents 1 From the NAS List main screen tap on Torrents 2 Tap any sub folder to view the files if needed 3 Tap on any file to play automatically x Se A wl Ge 7 11 50 torrents A NAS 3 Fedora 17 Beta i386 DVD torrent O B Fedora 17 Beta i686 Live Desktop torre 3 Fedora 17 Beta i686 Live KDE torrent a Fedora 17 Beta i686 Live LXDE torrent ma 3 Fedora 17 Beta i686 Live SoaS torrent O 3 Fedora 17 Beta i686 Live XFCE torrent a Fedora 17 Beta x86_64 DVD torrent Opening Torrents Chapter 5 OMNINAS for IOS Main Menus OMNINAS For 10S The iPhone OMNINAS application provides you with access to your OMNINAS device Tap this application to access the NAS List main screen Functions on this screen include About Help Advanced Local Link and Remote Link The OMNINAS application is available for download to your iPhone from the App Store Select the OMNINAS application and follow the directions to download the app Note Before you can access the iOS application you will need to setup Share Box in your OMNI NAS and add at least one user profile Main Menus This section introduces the menu elements of the
63. nus is done by using either the Finder utility or direct access through a web browser The two methods are defined in the following Connect by using the Finder utility available for Windows and Mac OS X users Connect through a web browser available for Windows Mac OS X and Linux users Connect Using Finder The Finder utility is available only for Windows or Mac OS X operating systems 1 Connect the OMNINAS as described in Connect to a Switch or Router 2 Run and use the Finder utility to obtain the OMNINAS IP address See the following figure Note If the selected language in the Setting Language does not match your computer system s settings the OMNINAS Finder Utility reverts to English by default All OMNINAS devices available within your subnet group are displayed in the NAS Found tab If devices are not automatically found click Search to manually perform this function iy OMNINAS Finder MAC Address Version 80 CE 73 34 D5 CD 0 30 20120709 Map Network Drives Delete Network Drives O 5 b o K o Exit Obtaining an IP Address 2 18 CONNECTING THE OMNINAS GETTING STARTED 3 Open a web browswer and type the IP address in the address bar The Login screen displays GC A D 192 168 1 33 OMNINAS Your Own Private Cloud English User name Password Shuttle COPYRIGHT 2012 SHUTTLE INC ALL RIGHTS RESERVED Connecting by Using the Finder Utility 4 Enter the username to l
64. ogin and configure the OMNINAS Default Username admin Password Note If the hard drives are not yet configured the OMNINAS Wizard screen displays You must configure the disks before continuing Connect to OMNINAS Web Interface To connect directly through a web browser you will need to set your computer s network settings so it is under the OMNINAS default subnet group see Connect Directly to a PC or Laptop OMNINAS default IP address 169 254 100 200 Note If the OMNINAS is not configured to use DHCP the default IP address is http 169 254 100 200 Make sure the OMNINAS and the computer connected to it are under the same subnet If the hard drives are not yet configured the OMNINAS Wizard screen displays You must configure the disks before continuing 2 19 CONNECTING THE OMNINAS GETTING STARTED 1 Connect your OMNINAS as described in Connect Directly to a PC or Laptop 2 Open a web browser 3 Inthe address bar type in the OMNINAS default IP address OMNINAS Your Own Private Cloud English User name Password Shuttle COPYRIGHT 2012 SHUTTLE INC ALL RIGHTS RESERVED Connecting Directly through a Web Browser 4 Enter the username to login and configure the OMNINAS Default Username admin Password Note If the OMNINAS is not configured to use DHCP the default IP address is http 169 254 100 200 Make sure the OMNINAS and the computer connected to it are
65. our region may use a different socket type Your OMNINAS is ready to be powered on See Powering On CAUTION Do not use inferior extension cords as this may result in damage to your OMNINAS The OMNINAS comes with its own AC adapter Do not use a different adapter to power the OMNINAS and other electrical devices Note The power adapter may become warm to hot when in use Be sure not to cover the adapter and keep it away from your body 2 8 CONNECTING THE OMNINAS GETTING STARTED Powering On Press WY to power on The status LED starts to blink This process may take 1 to 2 minutes Pressing Power Button A blinking LED specifies that the system is in the powering on state A solid LED specifies that the OMNINAS has obtained an IP address from the router DHCP connection See LED Defini tions for further information In the event of a Red Blinking LED state the system has failed to obtain an IP address from the router The system settings reverts to the default fixed IP address 169 254 100 200 Status LED Display During Boot 2 9 CONNECTING THE OMNINAS GETTING STARTED The HDD LEDs for any installed HDDs also light See LED Definitions for further information HDD LEDs Note In the event of failure or improperly installed HDDs the HDD LEDs blink red Additionally the Finder utility displays a power off message see the following HDD does not exist please power off the system and plugin HDD fisr
66. st Page Previous Page Next Page Last Page gt gt Backup Log Screen 3 32 SYSTEM BACKUP Wes INTERFACE Setting Up Backup Schedules The Backup Setting function allows you to add a scheduled backup 1 Select Backup and click on the Backup Setting tab 2 Select the source folder on the OMNINAS In the description field you can add a note to help you define this backup 3 Select the backup destination external devices or another OMNINAS device in the same subnet Backuplog Backup Setting List Backup Setting Backup from OMNINAS KD20 to External Devices Select OMNINAS KD20 Source disk 2 Description Name ofthe backup job max 64 characters or less 3 Select your backup destination Backup to External Devices Hitachi HT 542516K9SA00 1 0 1 156 288GB Backup to OMNINAS KD20 Host Scan NAS User name Password Time of Execution Weekdays O Mon O Tue O wea Eltnu O fri O sat O sun Hours Minutes 9 i Hours 0 Minutes Backup Now Creating a Backup Entry 4 If selecting another OMNINAS device type in the host name username and password to access the other device Click Scan NAS to search for a device within your network 5 In Time of Execution set the schedule time 6 Select Confirm to setup weekly backup according to the predefined schedule or select Backup Now for immediate execution 3 33 SYSTEM BACKUP Wes INTERFACE Editing Backup Schedu
67. succueuseucuensaucurensueuseneucuseneues 3 40 Application Services 3 42 Ne SN tr 3 42 DIT DOWNOGO EEE EERE 3 43 Setting Up BT Downloads a auuunnnnnannnnnnnnnnnnnnnnnnnnennnnnnnenn 3 43 Configuring PE EN inn 3 45 Share BOX ccccccccecccccccuccecneuaeneeaeneuseasuaeannneannseatesnntennnnans 3 48 Setting Up Share BOX cccccececeseeeeeseeeeeeeeeeeegeeeeaeeetegerees 3 48 Accessing Share BOxX ruuvenavunnrnanvnnevannnnenavunnenuvunnnnanunne 3 50 Setting Up Media Server ccccccecevesecueecucueseucuesuuuvesauueneues 3 52 OMNINAS for Android Installing the Application 4 1 Overview 4 1 Connecting an OMNINAS 4 3 Adding a WAN Device Le 4 3 Adding a LAN Device sesssesesssssssnsnsnsununnnsnnnnnnnnnnensnsnnnnnnnnns 4 5 Main Menus 4 7 Document Files 4 8 Movie Files 4 9 Photo Files 4 10 Posting to Facebook dn 4 11 Video Files 4 13 Music Files 4 14 Torrents 4 15 OMNINAS for iOS Main Menus 5 1 Connecting to Your OMNINAS 5 2 Adding a Remote Device ccccccseccceeeuceeeucuceueneucrensaucuensaues Adding a Local Device aaavvannnavnnnnnennnnnnennnnnnnennnnsnernnnnnennnne Configuration Opening Document Files Viewing Movie Files Viewing Photo Files Posting to Facebook enn Troubleshooting Troubleshooting Environmental Control System Temperature aunauunaunnavnannrvnennnrnunnvneavnnnnrannnveenunnnnee System Fan Setting de vi SPS 5 6 D 5 8 5 8 6 1 6 4 Copyright 2013 by Shut
68. t Fy Finder Utility Displaying HDD Failure The OMNINAS is now ready for setup and configuration Connect the system to your network by using the Finder Utility Connecting Your OMNINAS After setting up the hardware and connecting the ethernet port you will need to configure and initialize the type of mode to use To get you started quickly and easily the OMNINAS Finder util ity Windows and Mac users only is provided so you can quickly connect your OMNINAS Linux users proceed to Connecting by Web Browser Once a device is detected information from your OMNINAS such as Domain name IPv4 ad dress Mac address and firmware version is displayed on the main page The Finder Utility is available on the provided CD or for download from the following location http global shuttle com download download Note Linux users connect to the OMNINAS interface through the web browser and not the Finder utility Proceed to Connecting by Web Browser 2 10 CONNECTING THE OMNINAS GETTING STARTED Finder Utility OMNINAS Finder Map Network Drives Delete Network Drives OMNINAS Finder Utility Finder Utility Defined Moe DESCRIPTION Search Click to manually detect devices connected within the same network subgroup Click to access the login screen of the selected device The web interface of the Connect device displays through your default browser Click to create a network shortcut to the sele
69. te mndunseee 3 18 EEK DISKS ee 3 18 DISK MA NN een 3 19 Replacing a Hot swap Drive vvarananavunarunnnrnvereraveversvnnrnunn 3 19 ReEDIaCING a DIVE EE SE 3 22 Formatting DiSKS ssssesesesssnernnnrrnnnrnrnrrnrnsnrnnrnrnrnnrnrrrrenne 3 23 AUTO MOT 3 24 Share Management 3 25 Addin Folde rn 3 25 Viewing Folder rier 3 27 Editing FOIGErS cccccececeeeeeeeeeeeeseeeteeeeeeteeeeesteegeeetsagengs 3 27 Deleting FolderS sssssesssssunssnsnsnsnnnnnsnsnnnunnensnnnnnnnnnnnnnne 3 28 USB Management 3 29 Fe SET 3 29 MON 3 30 System Log 3 31 dear nd LOGS sosirea i NS 3 31 System Backup 3 32 Setting Up Backup Schedules cc ccceceee cece eeeeeeeeeeeeeneenees 3 33 Editing Backup Schedules raurarrvannannarnannennnrrnnnsunenrnunenn 3 34 Deleting Backup Schedules aurarrvarnurnarnannsunnrrnansurenrnunnnn 3 34 Viewing Backup Ls 3 35 System Configuration 3 35 Configuring Network Settings ccccseseseusevessuveressaveressauenes 3 35 DHCP Settings cccnsansesnesuscaearoeaaavensaanasnsenadsaoneeasnepnareewanuss 3 36 Static settings manual sesssessssssssrsssrnsnnnnrnrnrrnrrrrrnne 3 36 SCUM Date and TIO erisir iner a E 3 37 Rebooting and Powering Off cccccceec cesses eee eeeeeeeeeeneeeenaaes 3 38 Reboot the system NE NE 3 38 POWER Mp 5 59 Reset to Factory PEN 3 39 Web Interface Reset sassssurnnsnsnnsnnnnnnnnnnnunannnnnnnnnannnn 3 39 ELK ed GE EEE NE 3 40 Updating Firmware ccccsesccues
70. ter Setting You can enable or disable connected USB printers in the Printer Setting menu Note A USB printer must be connected prior to the following instructions 1 From the Home menu select USB and click Printer Setting All connected printers are visible in the Printer Setting menu 2 Select Disable from a printer to disable network discovery hun Printer Setting auto Copy Disable Manufacturer HPLaserJeti_u Hewlett Packard HP LaserJet 1020 Disabling Printer Once a printer is enabled for network discovery the printer is visible to users within the same subnet Users can install the printer to their local computer Printer drivers may be required for installation 3 29 USB MANAGEMENT Wes INTERFACE Auto Copy You can enable or disable auto copy from your SD or USB 3 0 front side port by configuring the Auto Copy settings Once enabled you can insert a USB device or SD media and the OMNINAS will automatically copy the contents from the source device to the designated folder on the OMNINAS Note To perform auto copy remove all backup jobs found on Backup gt Backup Setting List for the respective target drive SD USB3 0 Printer Setting ic Auto Copy Auto copy from SD Enable Disable Select NAS destination folder Folder1 Auto copy from USB3 0 port Enable Disable Select NAS destination folder Folder To perform auto copy please remove all backup jobs on SD or USB3 0 port
71. the de soo ee Remove Pause Resume Pause Oo Resume Oo Inspector ITransfers 4 Obytes s Obytes s Download File 1 0 bytes of 228 6 MB 09 Paused File Management Menus Rear View Identification ITEM ICON DESCRIPTION Opens file selection screen Removes selected file from task list Pause selected download Resume selected download Pause all downloads Resume all downloads 20922490 3 47 APPLICATION SERVICES Wes INTERFACE ITEM ICON DESCRIPTION T A Opens inspector pane 8 Set preferences 9 Download progress bar 10 GY Resume and pause current download Share Box The Share Box function allows you to setup remote access to your OMNINAS using a domain name Setting Up Share Box To enable remote access see the following 1 Select Share Box to open the Share Box Settings screen OMNINAS A Your Own Private Cloud English x Settings pa Share Box Setting Storage Share Box on off USB Host Name i omninas net Backup ss BT Download Share Box gi Port 3000 Media Server amp Password Confirm UPnP Support Yes No Share Box Menu 2 Inthe Share Box setting select on to enable the Share Box remote access function 3 Inthe Host Name field enter a host name for your server This is the registered name unique name that identifies your OMNINAS 4 Inthe Password field enter a password for your server Enter t
72. the health status remove check format and unmount a disk drive Creating a RAID Mode IMPORTANT Changing RAID types erases all data stored on your storage disks If there is saved data on the drive s backup your data before proceeding In a Single Disk Volume a second drive is not supported After creating a Single Disk Vol ume you must power off the system before installing a second hard drive CAUTION Installing a second hard drive in a Single Disk Volume while the system is powered on is not recommended 3 16 STORAGE MANAGEMENT Wes INTERFACE Prerequisites e Single Install one hard disk drive e JBOD RAID 0 RAID 1 Install two hard disk drives 1 Select Storage and click on the RAID Manager tab The current RAID mode is displayed above the available RAID modes see the following figure 2 Click on a RAID mode see RAID Types to select your preference 3 Click Create Disk Array auto Minor disk Manager RAID Manager Current RAID Mode SINGLE SINGLE JBOD RAID 0 RAID 1 Single Disk Volume Linear Disk Volume Striping Disk Volume Mirroring Disk Volume Create Disk Array Creating a RAID Mode 4 Aprompt displays press OK to continue 5 Aprompt displays to confirm the rebuild process click OK to continue The time to rebuild varies depending on RAID Array and HDD size When it is complete the Home screen displays 6 Log in to enter
73. the web client Preferences Add transfers Download to disk contents Start transfers when added Network Incoming TCP Port 51413 Encryption Ignore unencrypted peers Limit total bandwidth Download Rate 100 KB s Upload Rate 10 KB s Web Client Refresh Rate 5 seconds Preference Screen 4 Click Save to continue or Cancel to return to the BT Download menu 5 In Total Download Rate set the download rate 0 means unlimited rate 500 KB s is the maximum rate 6 In Total Upload Rate set the upload rate 0 means unlimited rate 500 KB s is the maxi mum rate 7 In Sort by select the criteria used to display the downloads Default Name Downloading Files 1 To download files using BT Download click Z to open the file selection screen CBT Setting GQ BT Download gr ITransfers Obytes s Obytes s Opening File Selection The File selection screen displays To upload a file to your OMNINAS you can choose a file or enter a URL 3 46 APPLICATION SERVICES Wes INTERFACE 2 Click Choose Files and select a seed on your local drive Or Enter a URL address with the target seed 3 Click Upload to add the file to the download task pane or click Cancel to return to BT Download Upload Torrent Files Please select a torrent file to upload No file chosen Opening File Selection File Management You can view the status and manage the download files by selecting the function buttons on
74. tle Inc All Rights Reserved No part of this publication may be reproduced transcribed stored in a retrieval system trans lated into any language or transmitted in any form or by any means such as electronic mechani cal magnetic optical chemical photocopy manual or otherwise without prior written permis sion from Shuttle Inc Other brands and product names used herein are for identification purposes only and may be trademarks of their respective owners Disclaimer Shuttle Inc shall not be liable for any incidental or consequential damages resulting from the performance or use of this product Shuttle Inc makes no representation or warranty regarding the contents of this manual Information in this manual had been carefully checked for accuracy however no guarantee is given as to the correctness of the contents For continuing product improvement Shuttle Inc re serves the right to revise the manual or make changes to the specifications of this product at any time without notice and obligation to any person or entity regarding such change The information contained in this manual is provided for general use by customers e FCC B Radio Frequency Interference Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may
75. ts to English by default 2 12 CONNECTING THE OMNINAS GETTING STARTED All OMNINAS devices available within your subnet group are displayed in the OMNINAS Found tab If devices are not automatically found click Search to manually perform this function G OMNINAS Finder j P Search Kc F Map Network Drives Q Delete Network Drives Gp eo OMNINAS Finder Utility Search Function 2 After a device is detected select an OMNINAS device and click Connect G OMNINAS Finder IPv4 Address MAC Address Name OMNINAS 3AD 5CD 192 168 1 37 80 EE 73 3A D5 CD Version 0 30 20120709 GQ searcn Map Network Drives Delete Network Drives K o Exit Finder Utility Connect Function Note The System Initialization screen only displays if new or unformatted HDDs are installed 2 13 CONNECTING THE OMNINAS GETTING STARTED 3 AutoRun the OMNINAS Wizard and click Start Please follow the procedures below Step 1 7 Welcome to OMNINAS Wizard This Wizard will guide you through the steps necessary to initialized your NAS You can click Start to use the wizard Start Welcome to OMNINAS Wizard IMPORTANT The initialization process will erase all data from the hard drive Make sure that the OMNI NAS is connected to a power source and is not powered down during this process to pre vent damage to the system Step 1 Language and Time Zone Select language an
76. wnloading without PC e Built in ultra quiet fan e Elegant ID design with 2 5 mm aluminum for better heat dissipation Package Contents Power Cord AC Adapter CD ROM Sy g LAN Cable Screw pack Quick Start Guide 1 1 FEATURES PRODUCT OVERVIEW System Requirements PC Users e Pentium Ill 500Mhz processor or higher e Microsoft Windows XP Home Professional Professional x64 SP3 or later e Microsoft Internet Explorer 7 0 Firefox 3 x Google Chrome or Apple Safari 3 0 or higher e Must meet minimum RAM requirements for your operating system e CD or DVD drive e Available 10 100 1000 Mbps network Ethernet port DHCP configured network recommended Network hub switch or router recommended e 3 5 SATA Hard Drive s Mac Users e Mac OS X 10 4 or higher e Apple Safari 3 0 or higher e Must meet minimum RAM requirements for your operating system e CD or DVD drive e Available 10 100 1000 Mbps network Ethernet port DHCP configured network recommended Network hub switch or router recommended e 3 5 SATA Hard Drive s Linux Users e Linux kernel 2 6 x or later e Available 10 100 1000 Mbps network Ethernet port DHCP configured network recommended Network hub switch or router recommended Smart Phone Users e Mobile Device iPhone iPad Android phone Android tablet e Mobile OS iOS 4 2 and above Android 2 3 and above 1 2 FEATURES PRODUCT OVERVIEW Personal Cloud
77. y Instructions The following safety precautions will increase the life of the Computer Follow all Precautions and instructions Do not place this device underneath heavy loads or in an unstable position Do not use or expose this device around magnetic fields as magnetic interference may affect the performance of the device Do not expose this device to high levels of direct sunlight high humidity or wet conditions Do not block the air vents to this device or impede the airflow in any way Do NOT expose to or use near liquid rain or moisture Do NOT use the modem during electrical storms The unit can be operated at an ambient temperature of max 40 C 104 F Do not subject it to temperatures below 0 C 32 F or above 40 C 104 F The ambient operating humidity for this device is 10 minimum to 90 maximum viii Chapter Product Overview FEATURES PRODUCT OVERVIEW Features e Embedded Linux e Supports Microsoft Windows and Mac OS e Largest single HDD capacity supported gt 4TB e USB 3 0 front panel flash drive external HDD hub printer digital camera etc e SD card reader e RAID 0 1 JBOD single HDD supported e Power Consumption Standby Operational 9W 15 5W e Aluminum chassis for improved heat dissipation e Supports USB Wi Fi module optional e Supports media server for video streaming e Easy HDD installation and one button HDD hot swap e Supports scheduled BT Do
78. you to specify the maximum rate of concurrent bandwidth allowed for the OMNINAS The maximum rate is calculated by dividing the uploaded data by the amount of downloaded data Set the default download folder incoming TCP port encryption refresh rate and total bandwidth 1 In BT Download click gt to open settings menu BT Setting Ger Download Resume All Inspector ITransfers Obytes s Obytes s BT Download Screen 2 Click Preferences to open the Preference screen ha be Open Resume All Inspector iTransfers 4 Obytesfs Obytes s 5 Preferences ASAP VTV mp4 ma Ww Total Download Rate r Total Upload Rate pnnas disk contents Bunheads S01E03 HDTV x264 ASAP VTV mp4 Sort By Settings Screen 3 Inthe Preference screen set the following settings e Download to select the default folder to save downloads e Start transfers select to begin downloading as soon as the entry is added e Network set the TCP port Default 51413 Note If modifying the TCP port make sure the port number is not blocked by your firewall router 3 45 APPLICATION SERVICES Wes INTERFACE e Encryption set this option to enable unencrypted data transfers e Limited bandwidth Set the download and upload rates 500 KB s is the maximum rate Alternatively you can set these settings by selecting Total Download Rate or Total Up load Rate in the Settings screen e Web Client set the refresh rate for

Shuttle KD20 storage server

Contents

Download Pdf Manuals

Related Search

Related Contents