Home

Speco Technologies D16RS 1TB

1. DDNS registration status can be checked from SYSTEM INFORMATION or SETUP gt SYSTEM gt DESCRIPTION gt DDNS STATUS SOFTWARE VERSION STORAGE SIZE IP ADDRESS MAC ADDRESS Ver 3 2 1 07 11 2011 217 GB 00 02 69 00 00 01 DDNS STATUS READY d4rs Check the NETWORK PORT Default 5445 WEB PORT Default 80 and the IP Address of the DVR from SETUP gt NETWORK Ja NETWORK TYPE P SUBNET MASK GATEWAY DNS PRIMARY DNS SECONDARY DDNS NETWORK PORT WEB PORT NE WOR K S TR RE AM 92 8 Port forward the NETWORK PORT Default 5445 and WEB PORT Default 80 of the private IP Address of the DVR on the network router Please refer to the user manual and guide for the detailed steps for port forwarding for specific router model 6 Run the network client software SPECO Multi Client Ver 3 0 4 4 Site Info Site Name DARS Site Address d4rs ddns specoddns net Port Number 5445 ID admin Password cece 7 Input Site Name Site Address IP address Port No and Password on the connect window e Site Name Input a name that properly describes a site e IP Address Domain name or Public IP address of a router that DVR is connected e Port Number Default Port Number is 5445 e ID Input ID of DVR Default ID is admin e Password Input network password of DVR Default Password is 1111 a 8 And select the OK button Then press button after che
2. Figure 4 6 1 NETWORK Setup Screen Table 4 6 1 Menu Items in NETWORK Setup Screen Item Description NETWORK TYPE DHCP DVR will automatically retrieve an IP address STATIC Network information must be manually configured IP Enter IP address that is assigned for the DVR SUBNET MASK Enter Subnet Mask that is assigned for the DVR GATEWAY Enter Gateway that is assigned for the DVR DNS PRIMARY Enter Primary DNS address that is assigned for the DVR DNS SECONDARY Enter Secondary DNS address that is assigned for the DVR DDNS Dynamic Domain Name System DDNS allows a DNS name to be constantly synchronized with a dynamic IP address In other words it allows using a dynamic IP address to be associated with a static domain name so others can connect to it by the static name Enable disable using domain name address through DDNS server NETWORK PORT Enter the port number NETWORK AUDIO Display the network audio port NETWORK PORT 1 PORT 33 WEB PORT Enter the port number for connection using web NETWORK Set the value for network streaming STREAM 4 6 1 Network Types 4 6 1 1 DHCP An IP address is automatically assigned by the DHCP server which automatically assigns the IP address and other parameters to new devices 4 6 1 2 STATIC IP address Subnet Mask Gateway and DNS are manually assigned by the user e IPADDRESS The fixed IP address of the DVR unit e SUBNET MASK T
3. Site Addition Site Info Site Name DARS Site Address 192 168 1 111 Port Number 5445 ID admin Password TID o Site Name Input a name that properly describes a site o IP Address Input IP address Public IP address of a router that DVR is connected or Domain name o Port Number Default Port Number is 5445 o ID Input ID of DVR Default ID is admin o Password Input network password of DVR Default Password is 1111 2 Click OK button And then the registered site is added on the directory window 7 8 1 2 Deleting a Site 1 Select the site sites to delete from the directory window 2 Click E SITE DELETE button And then the selected site sites is are deleted 74 7 8 1 3 Modify of Sites 1 Select the site sites to modify from the directory window 2 Click Es NET FINDER button And then the following window will be displayed as below Net Finder Address 192 168 1 151 3 Click MODIFY button And then the modified information is displayed as below Site Modify Site Info Site Name D4RS Site Address 192 168 1 151 Port Number 5445 ID admin Password Channels Channels Ch No 1 2 3 4 er am 19 7 8 2 Connect and Disconnect 7 8 2 1 Connect 1 Select site sites to connect from the directory window 7 8 2 2 Disconnect 1 Select site sites to disconnect from the directory window SPECO Multi Client Ver 3
4. 65 7 6 4 Display You can select the OSD On Screen Display to be displayed General qua Event Site 7 All site ES Event search Info Event im Record _ Display network statistics Alarm Disk NR e ab Date Time Motion About Record Video Loss Display Secondary monitor image correction Please use this option only on the PC when having a shattered image on the secondary monitor during use of multi monitor If option is enabled the performance of the program may drop 7 6 5 Language English French and Spanish is selectable General Event Language Enalist ES Event search French Record Ly Disk Spanish M Display o Y Language FT About 66 7 6 6 About About provides network client version information General Event E Event search BA Record E Disk M Display T About Tp SPECO Multi Client Version 3 0 4 4 Build 110524 Copyright C 2011 This product licensed to Warning this computer program is protected by copyright law and international treaties Unauthorized reproduction or distribution of this program or any portion of it may result in severe civil and criminal penalties and will be prosecuted to the maximum extent possible under the law 67 7 7 Remote Setup The menu settings for the DVR unit can be set over network Put the cursor of the mouse on the channel which is connected to the site and right click on the mouse to open the
5. The AVI file contains the 1 2 second s pre record and 1 second post record IP NOTIFICATION Enable disable sending e mail when the IP address is changed MAIL BY MOTION Enable disable sending e mail when the motion is detected MAIL BY SENSOR Enable disable sending e mail when sensor input is received MAIL BY VIDEO LOSS Enable disable sending e mail when the video loss is detected MAIL BY S M A R T Enable disable sending e mail when S M A R T is triggered MAIL DVR STATUS Enable disable sending periodical e mail of the system status 21 PERIOD MAIL PORT Assign Mail Port number SEURE OPTION Select the secure mail server connection method SSL or TLS MAIL TO Enter the appropriate email address to enable sending e mail reports using a virtual keyboard MAIL SERVER Enter the appropriate mail server information ID Enter the appropriate mail server ID PASSWORD Enter the appropriate mail server PASSWORD MAIL FROM To set the email address sent to the destination host UNIT NAME Name the DVR e g Factory This feature is to identify the name of the DVR under the same network 22 4 3 Setup RECORD Mode In the SETUP menu select the RECORD tab Then the RECORD menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item Figure 4 3 1 RECORD Setup Screen Table 4 3 1 Menu Items in RECO
6. Password Select to Channel 3 The app will display the selected channel s Double tap the channel screen to switch 1 channel display to 4 channels split display or vice versa O oo 1100 3 13 PM A t EE 9 2 2 PTZ Control To control the PTZ function of the camera tap the channel screen then the channel name will be highlighted in Yellow Using the PTZ menu icons on the screen control PTZF control AA FOCUS ZOOM NANA APPENDIX Network Connection LAN Y IP Router or HUB 1 Install the network client software from the supplied CD 2 Check the IP address from SETUP gt SYSTEM gt DESCRIPTION or SETUP gt NETWORK of DVR SOFTWARE VERSION Ver 3 2 1 07 11 2011 STORAGE SIZE 217 GB IP ADDRESS 192 168 1 111 MAC ADDRESS 00 02 69 00 00 01 DDNS STATUS DDNS OFF 3 Run the network client software speco technologies Be 2 2 D4RS IP 192 168 1 151 SPECO Multi Client Ver 3 0 4 4 89 Site Addition site Info Site Name D4RS Site Address 192 168 1 111 Port Number 5445 ID admin Password cono Cancel Input Site Name Site Address IP address Port Number and Password on the connect window e Site Name Input a name that properly describes a site e IP Address Input IP address e Port Number Default Port Number is 5445 e ID Input ID of DVR Default ID is admin e Password Input network password of DVR Default Pa
7. 4 4 4 Motion Zone Setup Select MOTION ZONE using the mouse or the control button on the remote control and select either PARTIAL ZONE or FULL ZONE using the mouse control The default value is FULL ZONE If FULL ZONE is selected the motion zone grid screen is not displayed Only set the level of sensitivity for MOTION SENSITIVITY FULL ZONE The motion sensor is active on the whole screen PARTIAL ZONE The motion sensor is active in the set detection frame Select the motion detection position using the mouse or the control button on the remote control Then left click on the mouse or left click and drag the mouse pointer to select or deselect the area Highlighted area indicates the partial motion detection zone Press the ESC button or right click on the mouse to return to the previous menu EAE VAREN 4242 DN MEIN DD 3 84 BENN NN Gees iv gt 17 MENA A MAN map gt A Se pm 4 4 7 Motion Zone Grid Screen TET eels am i ie AS PITT ki tit 4 IAN IA 30 4 5 Setup DISPLAY Mode In the SETUP menu select the DISPLAY tab Then the DISPLAY menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item To return to the previous setup menu screen press the ESC button ya p a a SEL Figure 4 5 1 DISPLAY Setup Screen Table 4 5 1 Menu Items in DISPL
8. It is highly recommended to assign a new password to protect the system AUTHORITY Set authority level of playback on each user OF PLAYBACK Checked box authorized to playback Blank check box no authority OK CANCEL 4 8 Setup STORAGE Mode In the SETUP menu select the STORAGE tab Then the STORAGE menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item 3 7 RECORDING LIMIT RECORDING LIMIT DAYS or FP o T a 0 0 0 Am a3 Figure 4 8 1 STORAGE Setup Screen Table 4 8 1 Menu Items in STORAGE Setup Screen Item Description OVERWRITE When enabled the DVR will continue recording and overwrite the oldest existing recorded data once the hard drive is full When disabled recording will stop once the hard drive is full DISK FORMAT You will have an option of YES or NO for formatting the Hard Drive After formatting HDD the DVR will reboot AN Caution It is recommended to archive any data that you may need in the future before formatting the hard drive A GE WARNING Are you sure to format disk If YES the system will restart to format disk Please wait a few seconds If NO the data will be kept m ad DISK INFO Hard drive information Displays the following information HDD SIZE 435 GB FREE 311 GB HDD LAST TIME 07
9. speco technologies User Guide ver 4 0 Model D4RS D8RS D16RS D4WRS D8WRS D16WRS 4 8 16 Channel Digital Video Recorder About This User s Guide Before operating the unit please read this user s guide thoroughly and retain it for future reference Cautions CAUTION AN AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Explanation of Graphical Symbols This symbol indicates the presence of important operating and maintenance servicing instructions in the literature accompanying the product This symbol indicates the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock property damage personal injury or death WARNING To reduce a risk of fire or electric shock do not expose this product to rain or moisture CAUTION Changes or modifications not approved by the manufacture will void the warranty of the product Using an incompatible battery may increase the risk of fire or explosion Replace only with the same or equivalent type battery recommended by the manufacture Discard used batteries according to manufacturer s instructions These Precautions must be Followed for Safety Reasons Warning e Do not use if the unit emits smoke e Do not disassemble the unit e Do not place a
10. 4 Click RECORD ON button And the color of button is changed 5 Live video data is recorded as set in Record and Disk setup These video data can be searched and play backed with Local Playback File Edit View Favorites Tools Help Q rex amp 3 Search Key Folders XxX e EI Address ja C Storage WNCO1 Name Size Type Date Modified 6 8 2009 4 00 PM 6 10 2009 3 16 PM 3 17 2009 6 24 PM 3 17 2009 5 35 PM 3 17 2009 5 44 PM 3 17 2009 5 52 PM 3 17 2009 6 23 PM 520090608 File Folder 20090610 File Folder 20090317 ndl 4 275 KB NDL File 3 20090317_0 ndb 102 402 KB NDB File 20090317_1 ndb 102 403 KB NDB File 20090317 2 ndb 102 402 KB NDB File 20090317 3 ndb 73 845 KB NDB File 78 7 8 5 Local Playback and Remote Playback 7 8 5 1 Playback of Recorded Video on a Local PC 1 Click KO LOCAL PLAYBACK And then Playback Window will be displayed over the Live Window SPECO Multi Client Ver 3 0 4 4 2 Select site sites to connect from the directory window E ja 3 Click Ne CONNECT button And then Green bar displays on Search calendar and timeline scale window SMTWT FS 1 2 E 5 amp 7 8 35 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 28 29 30 6 Move the marker on the timeline scale to where there is video data and press the PLAY button 16 18 7 Video data that is recorded on local PC will be play backed 8 Use the mouse scroll to digitally zoom in and out from
11. Item for ALARM OUT Setup Screen Item Description ALARM OUT Only one Alarm out is available SENSOR IN Sensor input from 1 to 4 MOTION ON Camera motion detection from 1 to 4 VIDEO LOSS ON Camera video loss detection from 1 to 4 ALARM DURATION Set alarm dwell time from 5 to 60 seconds ERROR ALARM Set the error type for the alarm activation The options are OFF ALL HDD ERROR and VIDEO LOSS 21 4 4 2 Keyboard Controller 8 PTZ Setup To control the PTZ functions of the camera connect the PTZ controller to the RS 485 port on the back of the chassis with CAT5 or equivalent cable D Connect the RS 485 cables of PTZ camera to the RS 485 port on the rear panel Inputs RS 485 D RS 485 D D4RS D4WRS D8 16RS D8 16WRS Figure 4 4 3 Device Mode Setup Screen ALARM OUT CONTROLLER amp PTZ SPOT OUT SITE CH 1 3 MOTION ZONE FULL ZONE jer 5 MOTION SENSITIVITY KEY TONE REMOTE CONTROLLER ID SENSOR TYPE APPLY CLOSE Figure 4 4 4 Device Mode Setup Screen 2 Open the PTZ sub menu by selecting the submenu button CONTROLLER SPEED ID CHANNEL CAMERA SPEED ID MA IA A AN e Figure 4 4 5 PTZ Control Setup Screen 28 Note Connect PTZ cameras that support RS 485 directly to the RS 485 port If the camera is controlled through an RS 232C interface use an RS 232C to RS 485 to RS 232C signal converter Use the PTZ setup screen to select the following option
12. Ver 1 4 8 7 FPS 0 Bit rate 0 Kbps Event Date Time Initialize success 2011 04 26 21 10 45 EI el O gt al 6 Click the CONNECT button on the Left upper corner of web viewer Then Connect dialog is displayed 83 http 192 168 1 12 login html Connect to remote system Address 192 168 1 12 5445 admin e Site Name Input a name that properly describes a site e IP Address Input IP address Public IP address of a router that DVR is connected or Domain name e Port Number Default Port Number is 5445 e ID Input ID of DVR Default ID is admin e Password Input network password of DVR Default Password is 1111 Then the cameras connected to the DVR are displayed on the screen Use mouse scroll to digitally Zoom in and out from a single channel display e258 Disconnect aul Live te Search 2011 04 27 19 52 42 192 168 1 12 Event Date Time 192 168 1 12 5445 Camera detected CH 1 2011 04 27 08 54 34 192 168 1 12 5445 camera detected ch 2 2011 04 27 08 54 34 192 168 1 12 5445 camera detected ch 3 2011 04 27 08 54 33 192 168 1 12 5445 camera detected ch 4 2011 04 27 08 54 33 192 168 1 12 5445 link connected 2011 04 27 08 54 33 Q RE BAJA amera detected a A N4 N 64 84 9 Network Access Using the Smart Phone Viewer Notice Please check with your Data Usage will be applied if there is no Wi Fi connection Phone Carrier 9 1 App Viewer for iPhone 1 Enter
13. 0 4 4 7 8 3 Still image Capture During Live Capture 1 Double click a channel to capture from the display screen Otherwise all channels will be captured Save Path CistoragelCapturelDARS File name 2011 07 19 112621 File Format BITMAP BMP 3 Set Save Path File Name and File Format And then click OK button 4 Still image is saved as set in Capture window dos h S A d Storage Capture D4RS v 4 Search DARS Go I Organize Include in library v Documents a Music Pictures EG Videos ed Homegroup a E Computer 2 Local Disk C DVD RW Drive D BackupDisc Cy DATA HDD E A 2 items Share with Slide show Burn New folder 2011 07 19 112606 2011 07 19 112922 11 7 8 4 Recording Video on Local PC During Live 1 Click EN SETUP button And then a setup window will be displayed as below 2 Select Record and set the values General Event Event search N Recor E Disk Bk Display About Record Condition 9 Always Event F Auto record Event Motion Alarm Duration Channel CH Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 3 Select Disk and set the values General Event Event search A Record a Bk Display Disk Space CA Disk Info Total space 465 GB About Free space 398 GB Disk full Replace oldest files Stop recording
14. 12 2011 16 41 00 Health Model Name Temperature TE Goog Ma HDD 1 HDD AAABBB1234567890 46 C 114 F Good OK DETAIL RECORDING Enable disable recording limit LIMIT RECORDING Set the recording limit days 1 90 days LIMIT DAYS If the RECORDING LIMIT DAYS are set to 1 the data will be overwritten after 24 hours S M A R T Set the alarm and beep by setting the HDD temperature limit Alarm will trigger alarm output Buzzer will trigger beeping from the internal speaker EMPERATURE LIMIT OK CANCEL 39 4 9 Setup CONFIG Mode In the SETUP menu select the CONFIG tab Then the configuration menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item Z i T p i Figure 4 9 1 CONFIGURATION Setup Screen Table 4 9 1 CONFIGURATION Setup Item Description EXPORT TO User can save the current configuration Setting values of the DVR to the USB USB flash drive Plug in the USB flash on the front panel and press the button to start the saving process Are you sure to save config to USB IMPORT User can upload the configuration of the DVR to another DVR using the USB FROM USB Flash drive Plug in the USB flash drive on the front panel and press the button to start the loading process 40 Are you sure to Save config to USE Press the button to reset the system to the defa
15. 2011 15 40 19 CH7 C CH8 lt PREV START CLOSE 4 The following image shows the progress of archiving the data CHANNEL 1 Complete 6 3 EZCopy Video Backup onto USB Flash Drive during playback Using EZCopy feature Video can be easily archived onto the USB flash drive or a hard drive E In playback mode press the B EZCOPY button to launch the backup function 1 Press EZCOPY button on the selected channel or all channels ae LEOIA 2 Then EZCOPY START time will display COBRA 3 Move Tine bar cursor to the time of end of backup and press EZCOPY button Then EZCOPY STOP time will display Gog Roe 4 EZCOPY window will display The DVR will ask whether to archive a Still Image a NSF or AVI EZCopy 2011 10 01 04 55 49 2011 10 01 04 56 42 SELECT FILE FORMAT NSF C AVI NEXT gt CLOSE 5 After backup format is selected also select media type and channel s to archive the data to the media 54 6 4 Transferring Still Images or Video from the ARCHIVE List The stored data in the hard drive can be found in the ARCHIVE list in the SEARCH window User can back up still images or video into the storage device from the ARCHIVE list 1 rn SR Select the date to begin searching and navigate through the days using the mouse or the control button or the remote control Once you have selected the date press the NEXT button to open the list of stored data Use t
16. 3 or to enter a DVR ID number or use as number key F REW e During playback To move the playback position 60seconds back e During Pause To move the playback postion 1 frame back F ADV e During playback To move the playback position 60seconds forward e During Pause To move the playback position moves 1 frame forward REW To rewind the recording PLAY PAUSE To play or to pause the recording in playback mode FF To fast forward the recording Direction buttons To move menu items or select a channel SETUP To open the SETUP menu SEARCH To go to SEARCH menu ESC e During setup To retun to the preivous menu screen e During Playback To exit playback mode O System lock To lock a system when pressing ESC button for 5 seconds e System unlock To unlock a system when pressing ESC button for 5 seconds BACKUP To start a backup operations in live or playback mode SEG To start auto sequencing the screen in full screen mode Toggle 17 4 Setting up the DVR The following sections detail the initial setup of the DVR Menu screen will close if user input is not received in 5 minutes 4 1 Setup Main Live Screen To enter the setup menu right click on the mouse and select setup from the submenu or press the setup button on the remote control VIDEO LOSS SETUP AUDIO 2 SEARCH SNAPSHOT CAMERA PTZ MAIN MONITOR SEQUENCE ON MANUAL RECORD ON ALARM OUT OFF VIDEO LOSS SITE INFORMATION VIDEO
17. 4 9 4 SE A A CURRENT SOFTWARE Ver 3 2 1 07 13 7 CURRENT SOFTWARE Ver 3 2 1 07 11 2011 USB CHECK Found USB MOUNT Ok FILE CHECK main bin SCAN CANCEL Figure 4 9 2 Figure 4 9 3 CURRENT SOFTWARE Ver 3 2 1 07 11 2011 USB CHECK Found USB MOUNT Ok FILE CHECK main bin 1 O O Upgrade Success REBOOT NOW REBOOT LATER Figure 4 9 4 NOTICE 1 If selecting REBOOT LATER the upgraded software will not be applied until the system reboots 2 If selecting REBOOT NOW when the USB flash drive is plugged the following message will pop up Remove the USB flash drive and select OK 42 5 Live Search and Playback 5 1 Live View In the Live screen video inputs from the cameras are displayed as they are configured in the Display Setup screen Various On Screen Display OSD symbols which indicate the status of the DVR are described in Table 5 1 1 VIDEO LOSS SETUP AUDIO 2 SEARCH SNAPSHOT CAMERA PTZ MAIN MONITOR SEQUENCE ON MANUAL RECORD ON ALARM OUT OFF VIDEO LOSS SITE INFORMATION VIDEO LOSS SYSTEM INFORMATION SYSTEM LOCK SYSTEM SHUTDOWN WB GMHMO 07 07 2011 12 34 56 RC ALL Figure 5 1 1 Live Screen and Quick Operation Window Table 5 1 1 Status Indicator Icons in Live Viewing Screen Icon Description Indicates the DVR is locked Note to unlock right click on the live view screen and click on Unlock Audio mute To select audio output press the Audio after click the right
18. AUDIO Enable disable audio recording for the specified channel SCHEDULE Set the recording schedule EZRECORD Set the recording by EZRecord feature The EZRECORD has high priority than other setting values on RECORD User can change the setting value such as resolution frame rate quality and recording type By the setting value the DAYS TO RECORD will change accordingly RESOLUTION CIF FRAME RATE QUALITY 1 FPS LEVEL 1 L RECORDING DAYS TO RECORD CONTINUOUS 21 DAY S 23 HOUR S APPLY CLOSE 24 4 3 1 Recording Schedules To setup a recording schedule select SCHEDULE in the RECORD menu Navigate through the items using the mouse or the control button Select CHANNEL gt select NONE CONTINUOUS or MOTION gt HIGHLIGHT AREA To copy a schedule to a different channel select the channel from the COPY SCHEDULE menu CHANNEL NONE CONTINUOUS CLEAR 01123456 7 8 9 1011 12 13 1415 16 17 18 19 20 21 22 23 ETT CH 1 Cancel Figure 4 3 2 Schedule Recording Setup Screen e NONE Disable recording e CONTINUE CONTINUOUS recording Highlighted in Green e MOTION MOTION recording Highlighted in Yellow e SENSOR SENSOR recording Highlighted in Red 25 4 4 Setup DEVICE Mode In the SETUP menu select the DEVICE tab Then the device menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of th
19. DEVICE DISPLAY NETWORK USER MANAGEMENT STORAGE UPGRADE TEE ADMIN CONFIRM PASSWORD e USER o CHANGE If logged in as ADMIN user can change password for ADMIN and USER1 2 3 o NEW PASSWORD Enter new password o CONFIRM PASSWORD Re enter new password to confirm 72 7 7 7 Storage Select Storage to configure continued recording settings by overwriting the hard disk and the storage period for the recording data SYSTEM RECORD DEVICE DISPLAY NETWORK USER MANAGEMENT UPGRADE OVERWRITE ON OFF RECORDING LIMIT OFF Ed RECORDING LIMIT DAYS SMART TEMPERATURE LIMIT ALARM ON OFF BUZZER ON OFF e OVERWRITE To continue recording by overwriting when the hard disk becomes full check the checkbox e RECORD LIMIT Sets whether to limit or not the recording data storage period e S M A R T Sets the TEMPERATURE LIMIT of the Hard Disk to trigger the ALARM and the BUZZER 7 7 8 Remote Upgrade SYSTEM RECORD DEVICE DISPLAY NETWORK USER MANAGEMENT STORAGE Model Hame MORS ee T E IE TN Current Software V WIZ HN O Browse UPGRADE Shows the current Firmware version installed on DVR o Browse Select BROWSE to locate the firmware file e Upgrade Select UPGRADE to upgrade the firmware of the DVR 73 7 8 Operation 7 8 1 Addition Delete and Modify of DVR Sites 7 8 1 1 Addition of Sites so 1 Click MSF SITE ADDITION button And then the following window will be displayed as below
20. button on the mouse Toggle from Audio 1 to 4 mute in order Indicates that alarm is set To set the alarm function press the Alarm button on the front panel Indicates that alarm output is activated on AS Event indicator When there is an event motion recording video loss HDD fail S M A R T this icon will be highlighted 43 Indicates that a network client is connected to the DVR Indicates that sequencing mode is enabled 2009 04 14 17 23 40 Displays the current date and time RC ALL Remote control ID display If a remote ID is not set the message ALL is displayed 15 Displays the amount of recording on the hard disk from 0 99 Indicates that HDD is recycled Continuous recording in progress Manual recording in progress To set the Manual recording mode press the Record button on the front panel Motion alarm recording in progress Sensor recording in progress Only for D8RS and D16RS model secon Right click the mouse and the quick operation window will be displayed as below SETUP AUDIO 2 SEARCH SNAPSHOT CAMERA PTZ MAIN MONITOR SEQUENCE ON MANUAL RECORD ON ALARM OUT OFF SITE INFORMATION SYSTEM INFORMATION SYSTEM LOCK SYSTEM SHUTDOWN Figure 5 1 2 Quick Operation Window 44 Table 5 1 2 Menu Items in Quick Operation Window Icon Description SETUP Setup button Click this button to go to a
21. on NETWORK gt NETWORK PORT Setup MENU NOTE If you access the DVR only within the same LAN the TCP port number does not need to be changed Network access beyond a router To access DVR beyond a router firewall you must open the proper TCP ports for live playback streaming for commands for remote backup and for audio streaming If these ports are not opened properly you can t access the DVR beyond a router o For live playback streaming for commands for remote backup Open the port number on NETWORK gt NETWORK PORT menu The default port number is 5445 o For bi directional audio Open the port number on NETWORK AUDIO PORT The default port number is NETWORK PORT number 1 o For web viewer downloading and remote firmware upgrading Open the port number on NETWORK gt WEB PORT menu The default port number is 80 4 6 4 Network Stream User can set the RESOLUTION FRAME RATE and the QUALITY for the network stream D4RS Up to 60 fps CIF for 4 channels D8RS Up to 120 fps CIF for 8 channels D16RS Up to 240 fps CIF for 16 channels lt Note gt Individual Channels can be set with different RESOLUTION FRAME RATE and QUALITY RESOLUTION FRAME RATE QUALITY hee LEVEL 5 H OK CANCEL T NETWORK STREAM Sl Figure 4 6 4 NETWORK Setup Screen Network Stream 35 4 7 Setup USER MANAGEMENT Mode In the SETUP menu select the USER MANAGEMENT tab Then the USER MANAGEMENT menu is displ
22. setup menu AUDIO Audio button Click this button to set an audio reception type Channel 1 through 4 Audio Mute SEARCH Search button Click this button to enter the search menu SNAPSHOT Snapshot button Click this button to create a snapshot JPEG STILL IMAGE CAMERA PTZ Pop up the PTZ user interface MAIN MONITOR Sequence button Click this button to use a sequence function SEQUENCE ON OFF MANUAL RECORD ON OFF Manual Record button Click this button to enable manual recording ALARM OUT ON OFF Click this button to enable disable Alarm outputs SITE Press the button to view the record setting of a selected channel INFORMATION CHANNEL NUMBER SITE NAME RESOLUTION D1 FRAME RATE 6 FPS QUALITY LEVEL 4 RECORDING TYPE CONTINUOUS VIDEO SIGNAL NTSC SYSTEM INFORMATION SOFTWARE VERSION STORAGE SIZE NETWORK TYPE iP ADDRESS MAC ADDRESS 00 02 69 00 00 01 DDNS STATUS DDNS OFF UNIT NAME SPECO RS4 REMOTE CONTROLLER ID SYSTEM Lock Unlock Setup button LOCK SYSTEM Click this button to showdown system SHUTDOWN 45 5 1 1 PTZ Control Table 5 1 3 Menu Items in PTZ Control Window INITIALIZE Initialize the PTZ settings of the selected camera PAN TILT ZOOM FOCUS AUTOSCAN PRESET TOUR Select PAN TILT using the AV 4 and button then press SEL Adjust the tilt UP DOWN pan LEFT RIGHT position using the AV and P gt buttons Select ZOM FOCUS using theav lt and P gt buttons then
23. the SpecoTech Multi Client icon on your desktop to start the program 7 4 1 Main User Interface speco technologies EJE E E DARS IP 192 168 1 151 SPECO Multi Client Ver 3 0 4 4 F cs om Ca us s I r o PT 7 4 2 Control Buttons Button Description Click this icon to run a playback window to search and play videos that are recorded in the local PC LOCAL PLAYBACK Click this icon to run a playback window to search and play videos that are recorded in the remote DVR REMOTE PLAYBACK 59 En THUMBNAIL REFRESH Click this icon to refresh and renew thumbnail image of the connected sites SITE ADDITION Click this icon to open Site Addition window E SITE DELETE Click this icon to delete site from the index window after disconnect a site SITE MANAGEMENT NET FINDER Select the site from the index window and click this icon to modify the information of specific site CONNECT Click this icon to connect the selected site sites KC onee Click this icon to disconnect the selected site sites Click this icon to setup configuration of UMS MULTI CLIENT Eb CAPTURE Click this icon to capture a still image EVENT LIST Opens list of events logged by the UMS Multi Client oy AUSE Click this icon to play pause live video Las ALARM ON Click this icon to turn on off alarm outputs Enable or disable recording of live video to local disk which has set in RECORD O
24. 1 58 AM 9 90 tab will AT amp T amp 3 46 PM 79 taal iUMS 1 2 0 Demo Demo Select Date amp Time Select channels Max 4 channels a ww Pit ia lo 14710 1 10 Auto Reconnect on Mode BETATT Connect Connect amp Play Site Information Site Demo IP DNS 192 168 1 23 2 Select the date hour minute AM PM and click Connect amp Play 86 ail AT amp T gt 3 46 PM Q 79 ad Demo Select Date 4 Time DATE Hour Min 3 The app will display the selected channel s Double tap the channel screen to switch 1 channel display to 4 channels split display or vice versa AT amp T amp 12 00 PM o 89 ED al AT amp T T 12 01 PM Q 89 Gat Time PLAYBACK Select Date amp Time PLAYBACK 4 Tap the menu button Then Playback menu icons will display Now Minute Hour Day SdH Pe Be 9 2 App Viewer for Android Phone 1 Enter the Android Market AA a 2 Search Speco Player in the Android Market and install the Speco Player app Notice SPECO Player is for the RS WRS and HD series DVRs SPECO VIEWER is not compatible with the T Series DVR s TH TN or TL or the PC Series DVR s 9 2 1 Live 1 Open the installed Speco Player App and select the Live Preview Then click the menu button of the phone to add a remote device 2 Select the registered device and select the channels to monitor up to 4 channels Then press SELECT button 87 ID
25. AY Setup Screen Item Description OSD Enable disable on screen display OSD CONTRAST Set the visibility level of the On Screen Display OSD 0100 MAIN MONITOR Enable disable sequential display of video in full screen mode SEQUENCE SEQUENCE Set the dwell time of each DWELL TIME single channel display in sequential display mode 3 60seconds SITE Select a channel to apply the name and covert settings change using the mouse or control button on the remote control Select a channel to apply the following settings using the mouse NAME Set the channel name Press the right square button and set the channel name and select OK using the mouse The name can be made up to 36 characters 31 COVERT Enable disable display of the specified video channel in live display VIDEO OUTPUT D4RS D4WRS VGA When VGA REOSLUTION is set at 1024 x 768 e CVBS OUTPUT Simultaneous Video Output ON e SPOT OUTPUT OFF When VGA RESOLUTION is set as 1280 x1024 e CVBS OUTPUT Simultaneous Video Output OFF e SPOT OUTPUT ON VGA RESOLUTION 1024 x 768 CVBS OUTPUT ON SPOT OUTPUT OFF OK CANGEL D8RS D16RS D8WRS D16WRS CVBS1 Composite Video Output CVBS2 Spot Out port 32 4 6 Setup NETWORK Mode Select the NETWORK tab Then the network menu is displayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu
26. AY mode you may return to the SEARCH screen by pressing the X button on the status bar Figure 5 4 1 Play Mode Screen The following status bar hides automatically and appears again if a mouse pointer is positioned to the bottom of the screen Table 5 4 1 Button Functions in PLAY Mode Button Description e 1x 2x 4x 8x 16x 32x speeds for D4RS D4WRS e 1x 2x 4x 8x 16x for DBRS DBWRS e e 1x 2x 4x 8x for D1I6RS D16WRS Single Channel backward playback speed 1x 2x 4x 8x 16x 32x 64x 4 Jump Step backward The playback position moves 60 seconds backward 51 Press to play or pause recorded video Jump Step forward Playback position moves 60 seconds forward e 2x 4x 8x 16x 32x speeds for D4RS D4WRS e 2x 4x 8x 16x for D8RS D8WRS e 2x 4x 8x for DI6RS D1I6WRS Single Channel forward playback speed 1x 2x 4x 8x 16x 32x 64x Slow Mode play Forward playback speed x1 4 x1 2 Press to backup the video EZCopy button Return to the previous menu screen search window or exit from the Menu 6 Back Up 6 1 Still Image Backup onto USB Flash Drive Still images can be captured and archived onto a USB flash drive or an USB external hard drive in live mode or while playing back recorded video 1 Select a specific channel which wants to backup on live screen 2 When you press SNAPSHOT button on Quick operation window the media selection window screen will display
27. About 3 Shutdown fai Setup Change Sensor in tE Alarm out 28 Motion SN Camera loss aa Network loss ad Record HRHRREARARA a ERAKAR KI Event Search Event log can be searched from the selected time General Fl First 2011 04 26 Hr 12 00 00 AM Event ES Event search op Record ath C Storage iLog E Disk Bk Display Type Address Event Date Time G Language About PF Last 2011 04 26 E 7 48 54 PM 64 7 6 3 Record Record Setup You can set the recording conditions as the following Always Event or Auto record And you can also select target DVR DVRs and channel channels When you set the recording condition to event you can set event for motion or alarm with duration General Event ES Event search Event A Record Motion Alarm Duration E Disk Record Condition Always 5 Event E Auto record Channel Bk Display Q Language P About Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Record Local Storage Setup You can select the local disk to record and the amount of disk space you want to allow the program to use for recording You can also select the option to overwrite data or stop recording when the maximum amount of disk space is full General Event E Event search Disk Info A Record Total space 465 GB Disk Space CA lel Disk Free space 398 GB E Display f Language Disk full 7 About Replace oldest files 5 Stop recording
28. CHANNEL FIRSTISECONDITHIRD FOURTH MOTION ISENSORIMANUALICONTINUOUS CONTINUOUS 11 02 2011 01 00 01 CONTINUOUS 11 02 2011 01 00 02 MOTION 11 02 2011 01 20 28 CONTINUOUS 11 02 2011 02 00 01 CONTINUOUS 11 02 2011 02 00 01 CONTINUOUS 11 02 2011 03 00 01 BACKUP lt PREV PLAY CLOSE Figure 5 3 9 Event Search Screen When the Event menu is selected the user can see a calendar which has recorded data Select a specific date and the event log will be displayed Press the PLAY button to playback the data or the SAVE button to save the data after selecting the specific data User can find a data of the specific channel and event using a button in the above red box as following Figure 5 3 10 Press the PREV to return to the SEARCH window 49 Channel y ALL Y FIRST i SECOND THIRD Y FOURTH Ev ent S ALL i MOTION SENSOR MANUAL 4 CONTINUOUS OK Cance Figure 5 3 10 Event Search Screen 5 3 4 Go To First Time You can access from the oldest recorded data on the DVR hard drive by selecting GO TO FIRST TIME on the SEARCH window Press the PREV to return to the SEARCH window 5 3 5 Go To Last Time You can access from the last minute recorded data on the DVR hard drive by selecting GO TO LAST TME on the SEARCH window Press the PREV to return to the SEARCH window 5 3 6 Go To Specific Time User can search for video data from a specific instance by setting the date and time in the GO TO SPECIFIC TIME menu Use the mou
29. Cen ERI Cenk re eR Cen re Cane Cees Tene etre Cente rt enn eee 29 4 44 MOON Zone Delia adds 30 45 5600 gt DISPLAY Modena da 31 4 6 Seu NETWORK Mo o Ue 33 A aE EE Eg EE Te ee a 34 162 DDNS se 34 4 6 3 Network Port and Web Porlt coocccccccccncccccccncocccocnconnnocnnocnnnnnnnnnnnnnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnns 35 4 6 4 Network SEAN rica baba das 35 47 Sep USER MANAGEMENT Mode Lae 36 4 6 Sel STORAGE NM SES 37 TF SEL CONFIG MOGE rs 40 le A EE EE er 42 5 LIVE SEAN ANG PAD He 43 STENE VIEW ii aii 43 Gje gd FG PLZ CONTO EE Po 46 5 2 Digital Zoom in Live and Playback cCreen oocccccccncccccnccccncnoncnonncnnnonnnonncnnnnnnnnoncnnnnnnnnnncnnnnenonanens 47 SER NNN 47 50 ELSE ii iia 48 AP e e O aes ae ae age ae 49 DO NNN 49 594 GO TO PARSE MS Ne 50 e o e EE OE O 50 5 9 0 010 10 SENEGALS 50 SST MONETS 50 A A KEENE NE NERE NE NENNE SE ENE ANE ENE SN RANE ARNE SAN PERSER 51 A nena bere eck aaa eaten erate aan tease onieeteretneeagasee 51 OP IT 52 6 1 Still Image Backup onto USB Flash Drive ccococccccccnccccncccccnccncnnonnnnonncnnnnnnnonnnnonnnnnnonnnonnnnnnncnos 52 6 2 Video Backup onto USB Flash Drive during playback oocccccccccoccccoccnccnccnconcncnncnnconcncnncnonononos 53 6 3 EZCopy Video Backup onto USB Flash Drive during playback ocooccccoccccccncconococnconcnonanonnnnos 54 6 4 Transferring Still Images or Video from the ARCHIVE LisSt ocooocccocnccccnc
30. LOSS SYSTEM INFORMATION SYSTEM LOCK SYSTEM SHUTDOWN LOs OD 07 07 2011 12 34 56 RC ALL Table 4 1 1 Live Screen and Quick Operation Window ADMIN PASSWORD LOGIN SETUP USER ADMIN Ed PASSWORD 2 EI OK CANCEL When the DVR prompts the LOG IN window enter the PASSWORD using the virtual keyboard or the front panel or the remote control The factory default password is 1111 It is highly recommended to assign a new password to protect the system User can assign a new password in SECURITY setup menu 18 4 2 Setup SYSTEM Mode In the SETUP menu select the SYSTEM tab Then the SYSTEM menu is displayed as pictured below Navigate through the menu items using the mouse or the remote control and change the value of the menu er sog SYSTEM DESCRIPTION ANGUAGE F D ET DATE DISPLAY FORMAT DATE amp TIME SETUP CLIENT ACCESS NTP SETUP UNIT NAME Figure 4 2 1 SYSTEM Setup Screen Table 4 2 1 Menu Items in SYSTEM Setup Screen Item Description DESCRIPTION Press the button to view the system information Software Version Storage Size IP Address MAC Address and DDNS Status SOFTWARE VERSION Ver 3 2 1 07 11 2011 STORAGE SIZE 217 GB IP ADDRESS 172 16 20 30 MAC ADDRESS 00 02 69 00 00 01 DDNS STATUS DDNS OFF Fo LANGUAGE Select the display language using the mouse or the control button on the remote control Once a language Is selected the display langua
31. MAIN MONITOR SEQUENCE ON Please select the media type MANUAL RECORD ON J USB STICK ALARM OUT OFF SITE INFORMATION SYSTEM INFORMATION iia lt PREV START CLOSE SYSTEM SHUTDOWN 3 Once you press START button the system will capture a still image and archive onto a USB flash drive NOTICE USB Flash Drive must be in FAT32 file format 92 6 2 Video Backup onto USB Flash Drive during playback Video can be captured and archived onto the USB flash drive or a hard drive while playing back the recorded video In playback mode press the BACKUP button to launch the backup function When you press BACKUP button on the selected channel or all channels the DVR will ask whether to archive a Still Image a NSF or AVI and select the proper media type Please select the media type J USB STICK Please select archive media type gt STILL IMAGE NSF AVI PREV Next gt CLOSE lt PREV START CLOSE 2 Select USB STICK Flash Drive to back up less than an hour Select USB HDD Large Backup to back up from 1 hour to 24 hours Please select the media type J USB STICK USB HDD LARGE BACKUP lt PREV NEXT gt CLOSE 3 Once you select the channel and duration the system will start to archive the data to the USB drive Channel _ PC ALL CH2 C CH3 C CH4 CH5 CH 6 J CH9 O CH10 O CH11 O CH12 OU CH 13 O CH 14 I CH 15 O CH 16 Duration 1 MINUTES x 07 12 2011 15 39 19 07 12
32. ME GO TO LAST TIME GO TO SPECIFIC TIME ARCHIVE LIST and LOG LIST on the screen 47 5 3 1 EZSearch The EZSearch window is used to find stored video with ease using the thumbnail playback screen e ge Figure 5 3 4 24 Hourly Thumbnail Screen Figure 5 3 5 Minute Thumbnail Screen Figure 5 3 6 Play Mode Screen 1 When the EZSearch menu is selected the user can see a calendar which displays recorded dates with highlights Select a specific date on a calendar Select a channel from Channel Selection Screen The recorded data is broken down into hourly preview 3 Select the desired hour thumbnail Then the recorded data is broken down into minute preview 4 Select the desired minute thumbnail and begin playback 48 5 3 2 Time Line Search The CALENDAR Search window is used to find the stored video by using the time line bar Channe lt PREV NEXT gt CLOSE lt PREV PLAY Figure 5 3 7 Calendar Screen Figure 5 3 8 Time Line Search Screen When the Timeline menu is selected the user can see a calendar which displays recorded dates with highlights Select a specific date and time Click and drag the red time indicator bar to the desired hour User can select a specific minutes using a button in the above red box Press the PLAY button after selecting the specific time Press the PREV to return to the SEARCH window 5 3 3 Event Search The Event Search window is used to find stored video
33. N setup menu Use the volume control bar to set the audio level AUDIO TS eS ic se the microphone volume control bar to set the micro phone level CS Oe On sos User can control PRESET TOUR SCAN MENU PRESET TOUR SCAN MENU UEM NE ER To select the numbers of display channel channels Single quad 9 channels and 16 channels of highlighted site To select the numbers of DVR DVRs 1 DVR 4 DVRs 9 DVRs 16 DVRs on main display screen 60 7 5 Search and Playback Window 7 5 1 Main User Interface You can access to search window by clicking the search icon Local Playback Remote Playback on the upper right of the Live Window O rr speco technologies DARS IP 192 168 1 151 RemotePE SPECO Multi Client Ver 3 0 4 4 2011 07 19 00 00 00 GEMTWIFS 1 zZ TT 9 EE 5 5 2011 mT 1 12 13 14 15 16 Jul Am 18 20 21 22 23 7 5 2 Main Control Panel Button Description a LOCAL PLAYBACK are recorded in the local PC o Click this icon to run a playback window to search and play videos that REMOTE PLAYBACK are recorded in the remote DVR OS THUMBNAIL REFRESH Click this icon to refresh and renew DARS IP 192 168 1 151 em thumbnail image of the connected sites E SITE ADDITION Click this icon to open Site Addition window E SITE DELETE Click this icon to delete site from the index window after disconnect a site Es NET FINDER Select the site fro
34. RD Setup Screen Menu Item Description SITE Select a channel for applying the following settings using the mouse or the control button on the remote control To change the values of all channels take the following steps Select the following to change the values of all channels 4 RESOLUTION S HALF D1 FRAME RATE 20 30 QUALITY LEVEL 4 LEVEL 4 LEVEL 5 H LEVEL 4 LEVEL 5 H RECORDING MOTION MOTION CONTINUOUS MOTION SCHEDULE PRE RECORD 15 SECON 15 SECON 15 SECON 15 SECON 15 SECON POST EVENT REC 19 SECON 19 SECON 19 SECON 19 SECON 19 SEGON AUDIO OFF OFF OFF OFF RESOLUTION Select D1 Half D1 or CIF using the mouse or the control button on the remote control FRAME RATE Set the frame rate for the specified channel The sum of the frame rate values from each channel cannot exceed the maximum frame rates for a specific recording resolution QUALITY Select the recording quality for the selected channel Options are Level 1 Low Level 2 Level 3 Level 4 and Level 5 High RECORDING Assign the recording mode for the selected channel Options are Continuous MODE Motion Schedule or Disable SENSOR Select the sensor setting for the selected channel RECORDING PRE RECORD Enable disable pre event recording Pre event recording time is up to 20 minutes POST EVENT Set the post event recording time duration for the specified channel RECORD 10 30 seconds
35. a Florida W Georgia Hawaii Idaho N Idaho S Illinois Indiana Indiana SW NW lowa Kansas Kansas W Kentucky E Kentucky W Louisiana AN A Maine Maryland Massachusetts Michigan GMT 6 GMT 9 GMT 10 GMT 7 GMT 7 GMT 6 GMT 8 GMT 7 GMT 5 GMT 5 GMT 5 GMT 5 GMT 6 GMT 5 GMT 10 GMT 8 GMT 7 GMT 6 GMT 5 GMT 6 GMT 6 GMT 6 GMT 7 GMT 5 GMT 6 GMT 6 GMT 5 GMT 5 GMT 5 GMT 5 kh Q3 GMT 5 GMT 8 GMT 6 GMT 5 GMT 7 GMT 6 GMT 4 GMT 4 GMT 4 GMT 4 GMT 5 GMT 4 GMT 7 GMT 6 GMT 5 GMT 4 GMT 5 GMT 5 GMT 5 GMT 6 GMT 4 GMT 5 GMT 5 GMT 4 GMT 4 GMT 4 GMT 4 Michigan W GMT 6 GMT 5 or Oregon S or Oregon SST os pa Pemmsyvana aus om om Rrodeisina oms om South Dakota W X Tennessee W x mon 1 ems ams va vigila es amt wy 3 0 U Nu 3 3 NOTE If you want the unit to automatically synchronize the local time the Time Zone must be properly set according to your local time zone 14 3 Name Function and Connection 3 1 Front Panel DxxRS DxxWRS Figure 3 1 1 Front panel Table 3 1 1 Front LED and Port of DxxRS Name Desorption O O POWER LED light is on when power is applied to the system HDD LED light is on when the system is recording video data USB Port This USB port for archiving footage into a USB device USB 2 0 connector 3 2 Connectors e Do not power this system on before all the
36. a single channel display 79 7 8 5 2 Playback of Recorded Video on Remote DVR 1 Click pe REMOTE PLAYBACK And then Playback Window will be displayed over the Live Window SPECO Multi Client Ver 3 0 3 6 2 Select the site to connect from the directory window 3 Click CONNECT And then Green bar displays on Search calendar and timeline scale window SM TWT FS 1 2 LE AEE 10 41 42 13 14 15 16 TE 18 19 20 24 22 23 24 28 29 30 4 Move the marker on the timeline scale to where there is video data and press the PLAY button ds 2 14 16 5 Video data that is recorded on the remote DVR is play backed 80 7 8 6 AVI Backup during Playback You can back up the recorded videos in AVI format during playback 1 Double click the target channel to backup 2 Select the beginning time by using the search calendar and timeline scale bar O O amp 1 2 4 5 6 7 8 9 10 41 12 13 14 15 16 1 18 19 20 24 22 23 24 28 29 3 4 Click EJ EZCOPY END button on the timeline scale to select the ending point of the backup Then the selected starting point and the ending point on the timeline scale bar will be marked in green Select Channels CH 1 CH 2 CH 3 CH 4 52 All Setting StartTime i 17 18 End Time 01 19 43 File Path C storage lBackupt File format Ay 81 6 You can also set the beginning time and ending time on this window After selecting a channel for backup cl
37. anguage ENGLISH Da Set date and time SET DATE amp TIME 20119 1 3 vi 8 16 91 10 9 0 v 2 2 Setting Daylight Saving Time To enable Daylight Saving feature NTP synchronization take the following steps 1 Enter the SETUP mode The default Username is ADMIN and Password is 1111 tr Tan TS TT SS yn M NT Z y KEN a SSN 7 lt A TE y q F VIDEO LOSS SETU P AUDIO 2 SEARCH i SNAPSHOT CAMERA PTZ MAIN MONITOR SEQUENCE ON MANUAL RECORD ON ALARM OUT OFF VIDEO LOSS dage VIDEO LOSS SYSTEM INFORMATION SYSTEM LOCK SYSTEM SHUTDOWN vWDG Ga 07 07 2011 12 34 56 11 OK CANCEL 2 Goto SETUP gt SYSTEM gt DATE 8 TIME SETUP 3 Select ON from the DAYLIGHT SAVING dropdown menu 2 3 Setting NTP Network Time Protocol 1 SETUP gt SYSTEM gt NTP SETUP gt ON P po SENC T 2 Select the proper TIME ZONE time P SERVER PRIMARY SNT SECONDARY SNTP SERVER TIME ZONE CONNECTION GMT 0 00 Lisbon Lon MODE TIME CONNECTION PERIOD 03 00 AM gt A AK O O O gt gt gt i DN U gt r Te 5121213 5 gt 22 lt gt lt lt l sS Qnin U gt gt lt don Monaco Table2 3 1 GMT Time Zone state Standard Time DaylightSaving Time Alabama Alaska Alaska Aleutian Islands Arizona Z ZIZ Arizona Navajo Arkansas California Colorado Connecticut District of Columbia Delaware Florid
38. anonncnonnnonnnnnoncnonanennnnss 78 7 8 5 Local Playback and Remote Playback cooocccoccccocnconcococnconcnonnnonnononnnnnnnnnnnrnonnnonnnnnnnrnnnanennnnss 79 PR OTAVI Backup QUANO P BAK ia a e e o e e o can 81 8 Network Access Using the Web Browser Viewer ooccconcccccccoccococnconcnononocnnnconcnnnnnonnnnonncnnnnnnoncnonass 83 9 Network Access Using the Smart Phone Viewer ccoooccccoccnccccncccccnconcnnonnnnconcnononcnonncnnonanononencnnnos 85 9 1 App Viewer for IPRONE Lae ek ekke mudaieiie 85 FETAL nee na ge ER iE nD CE ee eee 85 A A A A eee ee eee eee 86 1032 PA OA CK see 86 9 2 App Viewer for Android PHONG sitial 87 SA PE RAA A EE EE AO ee AE A AAR A EE AOLE 87 2 PI OONO dai E cena be ee ee 88 APPENDIX Network Connection LAN occcocccccccccnccccccnccccconocononconononononcnnononnnononnnnononenononnnnononeness 89 APPENDIX Network Connection Internet and DDNS occcoccccccnccccccncnconcncnccconcnconcnnnononncnnnanonnnnos 91 E O A 94 1 Main Features Easy Record Copy and Setup Easy Search by Thumbnail Preview Easy Copy Recording Rate 120fps D1 H 264 high quality compression saves HDD space Simultaneous live view playback while continuing to record network transfer or backup Remote monitoring recording playback configuration and control via internet 4 Channel Audio Recording NOTE Under federal law The Fourth Amendment to the U S Constitution Title III of the Omnibus Crime Co
39. ayed as pictured below Navigate through the menu items using the mouse or the control button on the remote control and change the value of the menu item A Table 4 7 1 Menu Items in USER MANAGEMENT Setup Screen Figure 4 7 1 USER MANAGEMENT Setup Screen ltem Description AUTHORITY Only the Admin will have access to the menu SETUP PASSWORD CHECK Select the Checkbox to enable the functions or leave the Checkbox blank to disable the functions Selected Checkbox The DVR will ask for a password when the given function is SETUP Enable Disable of access to Setup PB Enable Disable of access to Playback PTZ Enable Disable of access to PTZ Control R OFF Enable Disable of manual Record NETWORK Enable Disable of access to Network selected for all users Blank Checkbox The DVR will not ask for a password when the given function is selected for all users 36 PASSWORD ADMIN USER1 USER2 USER3 Selected Checkbox The user can access the function Blank Checkbox The user can not access the function PASSWORD Options are ADMIN USER1 USER2 and USERS SETUP Select USER PASSWORD using the mouse or the control button on the remote contro and press SEL button Select user type and enter the current password And enter a new password enter the same password again to confirm and select OK Then the message PASSWORD CHANGED is displayed The factory default password is 1111
40. cking the left check box speco technologies CH 3 CH 4 NO VIDEO NO VIDEO APPENDIX E SATA CONNECTION Please read the following instructions before using the E SATA port Failure to do so may cause serious damage to the recorded video SPECO is not responsible for data loss caused by improper usage e Use ONLY a new HDD or a HDD that is pre formatted on a PC e Turn off the DVR before plugging the E SATA HDD e DONOT disconnect the E SATA port while the DVR power is on e The purpose of the E SATA port is to extend recording capacity e Once connected DO NOT remove or disconnect the E SATA port from the DVR e The E SATA port is does not support the hot swappable function 94
41. connections are completed Make sure all the connections are properly secured Faulty connection may result in the system being damaged G N D Fy OJO Ol J o LJ 9 O GI 0 me oe ON SY ee sal OROKONOO D4RS D4WRS 15 0008900 EE Y O GESeco X E e NE AE BC J 8 8 8 8 le power D16RS D16WRS Figure 3 2 1 Connectors VIDEO IN Video input port VIDEO OUT D4RS Switchable Composite Video Output or Spot Monitor D8RS D16RS CVBS1 Composite Video Output CVBS2 Spot Monitor VGA VGA Video Graphics Array output port Connects to the PC VGA monitor RS 232C for DBRS D16RS D8WRS D16WRS only For engineering use only the function is used by a gender through the VGA output AUDIO IN Four connectors for audio input D8RS D16RS D8WRS D16WRS use an audio cable AUDIO OUT One connector for audio output D8RS D16RS D8WRS D16WRS use an audio cable ETHERNET Network terminal USB USB terminal E SATA External SATA port for extension storage SENSOR IN ALARM OUT RS 485 External sensor terminal External alarm out terminal amp RS 485 for PTZ Camera control POWER DC12V input Cooling fan 16 3 3 Remote Control 6000 0000 hina D eee iG gt z aai Typical Remote Control SE BACKUP i ID To set the remote control ID REC To start and stop manual recording 0 9 To select channel 1 2
42. dded to the video clip file The subtitle is embedded to the AVI file To display a subtitle user must install a special filter UMSDecoderFilter 6 5 2 NSF Format NSF format NSF format video can be played back using the ye HDplayer that the DVR copies to DvrPlayer folder on USB flash drive with video Use the mouse scroll to use digital zoom in and out feature 2011 10 10 04 44 44 2011 04 27 01 42 44 DLS Gs Gu M Gue e y X1 CHO1 7 Network Access Using the Multi Sites Network Viewer 7 1 Overview The SpecoTech Multi Client is a multiple site monitoring client software with video audio and alarm signals from the DVRs over networks The Specolech Multi Client does not limit the number of DVR units to register The program displays up to 16 DVRs and supports dual monitors On the program user may control PTZ cameras on the DVRs By attaching a microphone and speaker system to devices on site the user may make bi directional audio communication over the network 7 2 PC Requirements Minimum PC Requirements CPU Intel Core i3 Resolution 1280x720 OS Windows 2000 XP Professional XP Home Vista 7 NOTE Not all versions of Vista and 7 are supported Direct X 9 0c or Higher Recommended PC Requirements E Intel Core i5 2Ghz or higher V PU 4GB DDR3 or higher 512MB or higher S O Windows 2000 XP Professional XP Home Vista 7 NOTE Not all versions of Vista and 7 are suppo
43. don Monaco 5 CONNECTION MODE TIME CONNECTION PERIOD 03 00 AM OK CANCEL PRIMARY SNTP SERVER Input the address of the primary NTP time server SECONDARY SNTP SERVER Input the address of the secondary NTP time server TIME ZONE NTP synchronizes with GMT Greenwich Mean Time regardless of geography user must set their own time difference CONNECTON MODE Select the NIP time server connection mode from TIME INTERVAL and ONCE CONNECTION PERIOD TIME Refresh the time at the designated time e g 1AM 20 INTERVAL Every 1 hour 24 hours ONCE Synchronizes time only once NTP will not synchronize unless the Connection Mode is changed DVR sends E MAIL Notification when the NTP server time is faster than the system time with bellow message NTP server time is faster than the system time In this case NTP server time is ignored to protect the user data User must set the time manually SYSTEM TIME Mon Oct 10 13 46 49 2011 SERVER TIME Mon Oct 10 13 33 12 2011 DVR ID DVR IP ADDRESS 172 16 2 46 SEND EMAIL TRANSMISSION MODE VIDEO IP NOTIFICATION OFF E MAIL BY MOTION OFF E MAIL BY VIDEO LOSS OFF Ea MAIL BY 5 M A R T OFF 53 MAIL DVR STATUS OFF MAIL PORT SECURE OPTION NONE 3 MAILTO MAIL SERVER HA ID HA EN PASSWORD MAIL FROM CA TRANSMISSION MODE Select the mail transmission mode TEXT or VIDEO On VIDEO mode AVI video file is attached when the motion is detected
44. e SYSTEM RECORD DEVICE DISPLAY NETWORK USER MANAGEMENT STORAGE UPGRADE ALARM OUT SENSOR IN MOTION ON VIDEO LOSS ON ALARM DURATION ERROR ALARM CONTROLLER PEED ID PTZ CHANNEL CAMERA z 7 a 4 mh a ra a MOTION SITE CH1 MOTION ZONE FULL ZONE MOTION SENSITIVITY KEY TONE REMOTE CONTROLLER ID SENSOR TYPE EJ El o Y 7 o Ta a Tl Tl HH ENE e ALARM OUT Set the sensor motion and video loss for triggering alarm relay HDD Error and Video Loss can trigger beeping e CONTROLLER Set the controller baud rate and ID e PTZ Set the PTZ baud rate protocol and ID e MOTION Setup the motion detection area and the sensitivity o SITE Select the channel o MOTION ZONE FULL Zone or PARTIAL Zone o MOTION SENSITIVITY 1 9 High sensitivity level e KEYTONE Sets On or Off of Key Tone e REMOTE CONTROLLER ID Sets an ID number on the supplied remote control for its identification e SENSOR Select the type of each sensor 7 7 4 Display Select the DISPLAY tab to set the DISPLAY conditions SYSTEM RECORD DEVICE DISPLAY NETWORK USER MANAGEMENT STORAGE UPGRADE OSD ON OFF OSD CONTRAST 100 MAIN MONITOR SEQUENCE ON OFF SEQUENCE DWELL TIME 3 SECOND S SITE NAME COVERT BRIGHTNESS CONTRAST HUE SATURATION y 4 SS lt These settings apply to all channels e OSD Sets whether to display or not date and time as well as channel number on th
45. e CLIENT ACCCESS Enable Disable remote access through network client software e NTP SETUP Sets whether to synchronize the time using NTP server or not o Primary SNTP Server Input the NTP primary server address o Secondary SNTP Server Input the NTP secondary server address o Time Zone Select the time zone o Connection Mode Select the connection mode to NTP time server e SEND E Mail SETUP Sets whether to enable disable e mail sending function o TRANSMISSION MODE Select the mail transmission mode TEXT or VIDEO o IP NOTIFICATION Enable disable sending e mail when the IP address is changed o MAIL BY SENSOR Enable disable sending e mail reports when an alarm event is triggered o MAIL BY MOTION Enable disable sending e mail when the motion is detected o MAIL BY VIDEO LOSS Enable disable sending e mail when the video loss is detected o MAIL BY S M A R T Enable disable sending e mail reports when S M A R T is triggered o MAIL DVR STATUS Enable disable sending periodical e mail of the system status o MAIL PORT Mail port setting o SEURE OPTION Select a secure mail server connection SSL or TLS o MAIL TO Input the appropriate email address to enable sending e mail reports o MAIL SERVER Input the SMTP server name as well as the user ID and password o MAIL FROM Return Mail Address Set the source e mail address to be notified to the destination e USER NAME Name the DVR 69 7 7 2 Record Select RECORD tab to set the record
46. e menu item d V Y SEL Figure 4 4 1 DEVICE Setup Screen Table 4 4 1 Menu Items in DEVICE Setup Screen Item Description ALARM OUT Set the sensor motion and video loss for triggering alarm relay HDD Error and Video Loss can trigger beeping CONTROLLER amp PTZ Set the PTZ baud rate protocol and ID SPOT OUT D4RS D4WRS CVBS OUT is switchable as Composite Video Output or Spot Out according to the resolution of VIDEO OUTPUT VGA D8RS D16RS D8WRS D16WRS CVBS1 Composite Video Output CVBS2 Spot Out SITE Select specified channel for motion zone setup MOTION ZONE Select either Full Zone or Partial Zone for motion detection MOTION SENSITIVITY Set the motion sensitivity for the selected channel Control the motion sensitivity from 1 to 9 26 9 Highest sensitivity 1 Lowest sensitivity KEY TONE Enable disable key tone REMOTE CONTROL ID Set the remote control ID 1 Select ID 2 Input the remote control ID number 3 An icon will indicate on the Live Screen if the remote control ID is synchronized The options are from 0 to 99 SENSOR Select the type of each sensor Option is Off Normal Open or Normal Close 4 4 1 Alarm Out ALARM OUT PE SENSOR IN ESE A eS MOTION ON P DE a AES VIDEO LOSS ON Sa ES ES EE ALARM DURATION 60 SECOND S E ERROR ALARM ALL AE ox EE Figure 4 4 2 ALARM OUT Setup Screen Table 4 4 2
47. e screen e OSD CONTRAST Adjust the character contrast on the screen 71 e MAIN MONITOR SEQUENCE Setting for automatically switching the displayed video e SEQUENCE DWELL TIME Sets the interval for automatically switching the screens e SITE Name Covert Brightness Contrast Hue Saturation These settings apply to the specified channel only 7 7 5 Network SYSTEM RECORD DEVICE DISPLAY NETWORK USER MANAGEMENT STORAGE UPGRADE NETWORK TYPE DHCP IP SUBNET MASK GATEWAY DNS PRIMARY DNS SECONDARY DDNS HOST NAME SUBMIT UPDATE ezDDNS NETWORK PORT NETWORK AUDIO PORT WEB PORT NETWORK STREAM RESOLUTION FRAME RATE m p amp 0 FPS QUALITY LEVEL 5 H NETWORK TYPE o STATIC The address setting mode is manual Input IP Gateway Subnet Mask and DNS IP o DHCP The address setting mode is automatic e DDNS Set whether to use DDNS service or not o HOSTNAME Allows the user to setup a domain name manually o SUMBIT UPDATE Select ON to submit the settings o ezDDNS Enable disable ezDDNS to register the host name automatically e NETWORK PORT When connecting multiple DVRs to the network set a unique port number e NETWORK AUDIO PORT Display the network audio port NETWORK PORT 1 e WEB PORT Set a web server port number e NETWORK STREAM Set the Resolution Frame Rate and the Quality 7 7 6 User Management Select the USER MANAGEMENT tab to change the USER MANAGEMENT password SYSTEM RECORD
48. ge will change DATE DISPLAY Select the date display format using the mouse or the control button on the remote FORMAT control Options are MM DD YYYY YYYY MM DD DD MM YYYY YYYY MM DD MM DD YYYY DD MM YYYY 19 DATES TIME Select the display date and time using the mouse or the control button on the remote SETUP control and press OK button to set the present date and time DAYLIGHT SAVING 4 SET DATE amp TIME pom EJ DEN GN BR OK CANCEL Select DAYLIGHT SAVING using the mouse and the control button on the remote control and select the appropriate daylight saving time zone The options are OFF Daylight saving is turned off USA Applies the USA daylight saving time EU Applies the EU daylight saving time Select the GMT AREA using the mouse or the control button Set the time difference with the standard time using the mouse or the button OTHERS If the time zone is neither USA nor EU set the date and time of the daylight saving period Select BEGIN or END using the control button and press the SEL button Caution Do not set the start time to 23 00 for DLS DLS cannot be applied if the date of BEGIN and END is the same CLIENT Enable Disable remote access through the network ACCESS NTP NTP Network Time Protocol which synchronizes the time of the computer systems over SETUP variable latency data networks PRIMARY SNTP SERVER Pool ntp org SECONDARY SNTP SERVER TIME ZONE GMT 0 00 Lisbon Lon
49. guration of UMS Multi Client software The SETUP window is displayed as below 7 6 1 General Security Option Set a password for security options Select security options and set a password Then when you access any of selected functions you need to enter the password You can also set the save path for capturing and backup Save Path Specify the location to save captured still image for Capture and Backup data Miscellaneous Automatic Reconnection If enabled the software will automatically try to reconnect to the last successful IP address But when CLIENT ACCESS is OFF on the DVR the software will not try to reconnect even if it is enabled Always On Top If enabled the software display will be continuously on the top of other windows Time Format Change the way the Client software displays the time General security Option Event Startup E Shutdown E Setup Event search Fl Local Playback E Remote Playback A Record l Disk Save Path Bk Display Q Language About Password Capture CAstorage Capture Backup CAstorage Backup Miscellaneous Automatic reconnection Fl Always On Top Time Format MM DD 63 7 6 2 Event Event log can be archived and searched Event Log Specify the location to save event logs and select event to archive E ath CistoragelLogi ES Event search Size lo MAX 100MB fig Record E Disk Bk Display G Language Event Event list Startup P
50. he mouse or the control button on the remote control to scroll through the archive list Select a list of stored events in the archive list Once the desired event has been selected press the DISPLAY button to view the still image or the first frame of the selected video Press the BACKUP button to launch the archiving function in playback mode Press the CLOSE button to return to the SEARCH window rfv AVI 1 min CH6 AVI 1 min r v AVI 1 min CH6 AVI 1 min 6 log s found 07 13 2011 20 44 20 07 13 2011 20 45 37 07 13 2011 20 45 46 07 13 2011 20 55 52 07 13 2011 20 56 02 lt PREV DISPLAY CLOSE Figure 6 3 1 Archive Search Screen 55 6 5 Playback of Backup Video 6 5 1 AVI Format AVI format AVI format video can be played back by Window Media Player or other media player that is compatible with AVI format video 1 Please install the UMSDecoderFilter that the DVR copies DvrPlayer folder on USB flash drive with the video UMSDecoderFilter is exported to the DvrPlayer folder of the USB drive Ji gt Computer USB DRIVE E DvrPlayer p y Organize v Share with w Burn New folder Homegroup at m i 3 Se 18 Computer amp os c CNC Ctrl Pla HDPlayer hi_h264dec_w UMSDecoder e USB DRIVE E yer dil m dill ilter 2 Otherwise the video and time stamp over video cannot be displayed properly in Windows Media Player Timestamp On AVI The subtitle is embe
51. he subnet mask for the LAN e GATEWAY The IP address of the Gateway e DNS PRIMARY The primary address of Domain Name Server e DNS SECINDARY The secondary address of Domain Name Server NOTE Unless DNS is properly set the DDNS and the e mail features will not work 4 6 2 DDNS DDNS Dynamic Domain Name System allows a DNS name to be constantly synchronized with a dynamic IP address It allows using a dynamic IP address to be associated with a static domain name Once the setting is completed the DDNS address will be http nostname ddns specoddns net For example if you enter the host name as D4RS then the address will be http d4rs ddns specoddns net Select NETWORK gt DDNS The menu displays as below ENABLE DDNS HOST NAME SUBMIT UPDATE ezDDNS APPLY CLOSE Figure 4 6 3 NETWORK Setup Screen DDNS Table 4 6 2 DDNS Item Description ENABLE DDNS Enable disable the Dynamic Domain Name Service 34 HOST NAME This item allows the user to setup a domain name manually using virtual keyboard displays as shown SUBMIT UPDATE When manual host name input is done move the cursor to this item and select ON to submit the settings ezDDNS Enable disable ezDDNS to register the host name automatically 4 6 3 Network Port and Web Port Connecting DVR DVRs through an IP sharing device each DVR must be assigned a unique TCP port number for access from outside the LAN This port number is displayed
52. ick the OK button The backup will begin select Channels CH 1 CH 2 CH 3 CH 4 All setting Start Time 01 17 18 End Time 01 19 43 File Path C1StoragelBackupi File format Ayl 7 AVI video data is recorded as set in AVI Backup window AVI format video can be played back by using Window Media Player or other media player that is compatible with AVI format video IN ies 82 8 Network Access Using the Web Browser Viewer The DVR provides a live remote monitoring feature by web browser viewer NOTE Web Brower is only available for Internet Explorer 1 Check the IP address of the DVR from SETUP gt SYSTEM gt DESCRIPTION gt IP ADDRESS or 2 Input the IP address or Domain name address that you pre registered Address A Go 3 Click this bar Then the dialog box is displayed 9 This site might require the Following ActiveX control WebViewer from Click here to install 4 Click Install to download and install the ActiveX control far User Account Control A gg Do you want to allow the following program to make changes to this computer C Program name SpecoTech WebViewer verl 4 8 7 Verified publisher Speco Technologies File origin Downloaded from the Internet Y Show details 5 The Web Browser Viewer will be displayed as below after the ActiveX installation speco technologies S Connect p ev Live fe Search 2011 04 26 21 12 27 Web Client
53. ing conditions SYSTEM SITE RESOLUTION FRAME RATE QUALITY DEVICE DISPLAY NETWORK USER MANAGEMENT STORAGE UPGRADE alo EIE EN ET LEVEL 5 H RECORDING MODE MOTION SENSOR RECORDING 4 PRE RECORD 1 MINUTE S POST EVENT RECORD 10 SECOND S AUDIO EXRecord RESOLUTION FRAME RATE QUALITY ON OFF a Cl i T Tl a tf ENE LEVEL 5 H RECORDING MOTION DAYS TO RECORD 1 DAY S 1 HOUR S These settings apply to the specified channel only e Recording Setup O O O 0 0 0 0 O RESOLUTION Sets the resolution for the recordings The set value applies to an individual channel FRAME RATE Sets the recording rate QUALITY Sets the image quality in 5 levels RECORDING Sets the recording mode RECORDING MODE CONTINUOS SCHEDULE MOTION PRE RECORD Sets whether to perform or not pre recording POSE EVENT RECORD Sets the duration of the event recording AUDIO Sets whether to perform or not audio recording These settings apply to all channels e EZRECORD O O O 0 O RESOLUTION Sets the resolution for the recordings The set value applies to an individual channel FRAME RATE Sets the recording rate QUALITY Sets the image quality in 5 levels RECORDING MODE Sets the recording mode RECORD DAYS By the setting value the Recording Days will change accordingly 70 7 7 3 Device Select Device to set Spot Out Enable Disable CVBS Out motion zon
54. lti sites Monitoring SW 1 n Live Search Backup Remote Setup PTZ control EZCopy Yes Internal Beep By Video Loss HDD Error S M A R T S W Upgrade USB Flash drive Remote S W Upgrade MAC Viewer Power E A Power Supply Voltage DC 12V 3A DC 12V 5A Source Allowable operation temperature During Features 5 C 40 C During storage 10 C 50 C operation Allowable operation humidity 20 80 Unit Weight Gross weight DxxRS Around 3 74 lbs Around 7 lbs Dimension Unit Dimension W x H x D DxxRS 13 6 x 2 56 x 10 48 Please note that specifications and unit exterior design are subject to change without notification Table of Contents bh AF 10 2a MAP POE HPS 11 2 1 Initial Boot up and Basic Time Setup ersin E 11 2 2 Setting Daylight Saving Times Ains 11 2 3 Setting NTP Network Time Protocol ccoocccccocncccccnccccncconcnonncnononononnnncnnnnnnnnnnonnnnononcnonnnnnnnnns 12 3 Name Funci on ana COMEN iio eco lead coco 15 e ete Ae ocala ade sheds sate A Jala aie A 15 ses GONMCCIONS EE 15 eNO PIO FC 9 0 acne acest fete cetera E RCP OE ep 17 A a er ee Pee eee Seem eee er eet 18 An Setup Mali LIVE STEEN Lyga PRS 18 4 2 5Seup STSTEM MOd6 ninia 19 NENNE 23 23 RECON SENSE e 25 4 4 SEUD DEVICE ME PRP 26 A e Ue O O e nl E o EE ea 27 4 4 2 Keyboard Controller amp PTZ Setup cooccncccccccccnnccncncccncnonncnnnnnnnonnnnnnnnnonnrnnnnnnnnnnnnnnnnnnnnnnonnnnnnnnnns 28 o
55. m the index window and click this icon to modify the information of specific site 61 MES connect Click this icon to connect the selected site sites MES Connect Click this icon to disconnect the selected site sites Ti Click this icon to setup configuration of Speco Tech Multi Client AA SETUP MN CAPTURE Click this icon to capture a still image Opens list of events logged by the UMS Multi Client ud EVENT LIST El Click this icon to set the beginning time for backup of the recorded Click this icon to set the ending time for backup of the recorded video Click this icon to backup the recorded video in AVI format FE me To select the numbers of DVR DVRs 1 DVR 4 DVRs 9 DVRs 16 DVRs on main display screen le 3 To select the numbers of display channel channels Single quad 9 channels and 16 channels of highlighted site To select the channel to playback The calendar shows dates with recorded video in color 10 11 12 13 14 15 16 47 18 19 20 21 22 23 24 28 29 30 To change a timeline scale from 24 hours to 60 minutes The timeline shows recorded data in color on the bar You can adjust the timeline scale and move it to the time you wish to playback Then click the play icon to display the recorded video Digital Zoom Window in Live and Playback Only available in Single Channel Viewing 62 7 6 Setup of SpecoTech Multi Client Click the setup icon EN to setup the confi
56. ntrol and Safe Streets Act of 1968 as amended by the Electronic Communications Privacy Act of 1986 18 U S C 2510 et seg and the Foreign Intelligence Surveillance Act of 1978 50 U S C 1801 et seq permit government agents acting with the consent of a party to a communication to engage in warrantless interceptions of telephone communications as well as oral and electronic communications Automatic camera detection Plug amp Play Covert camera operation provides enhanced security and administrator control Dynamically programmable recording priority motion detection alarms and scheduling Simple and Easy Graphic User Interface Simple Scheduler VGA Output Password to secure installation authorization Network software supports 10 100Mbps USB 2 0 port for video clip exporting and easy firmware upgrade via USB Flash Drive Exclusive File Format Backup and Player Variety of Ways Network Access via CMS Network Client Software Web Viewer and Mobile Viewer S M A R T Self Monitoring Analysis and Reporting Technology for HDD 10 2 Initial Boot up Process 2 1 Initial Boot up and Basic Time Setup 1 During the first boot up the following logo and message will be displayed Initializing system speco technologies It may take a few seconds or minutes to check system 4 8 Initializing 2 After the system initializing is completed select the language and set date and time as specified below Choose l
57. ny heavy or sharp objects on the unit e Do not place on uneven surface e Do not expose to shock or vibration e Do not move the unit when the unit is powered on e Do not block and allow dust to accumulate in the air vents e Do not restrict airflow of the unit doing so can damage the unit e Only qualified and experienced personnel should perform installation and servicing e Turn off the power of the DVR when connecting Cameras Audio or Sensor Cables e The manufacture is not responsible for any damage caused by improper use of the product or failure to follow instructions for the product e The manufacture is not responsible for any problems caused by or resulting from the user physically opening the DVR for examination or attempting to repair the unit e The manufacture may not be held liable for any issues with the unit if the warranty seal is removed Product Components Please make sure the following components are included as specified below DVR Unit 3 D4WRS D8WRS D16WRS or D4RS D8RS D16RS Remote Control vee of hie 547 Battery1 5V AAA x 2EA speco technologies Quick Start Guide Mouse for D4RS D8RS D16RS amp N Software amp Manual CD 3 Adaptor DC12V 3A for D4RS D4WRS DC12V 5A for D8RS D16RS D8WRS D16WRS amp Power cable 110V or 220V Audio Cable for D8RS D16RS D8WRS D16WRS Specifications ITEM D4RS D4WRS D8RS D8WRS D16RS D16WRS Channel ME Level 4CH 8CH 16CH Comp
58. ocnccncncnanononncnncnnonnnnnonos 55 6 5 Playback Of BACKUD VideO israelitas 56 SEAT FOT Av eee 56 NPR e e te 56 7 Network Access Using the Multi Sites Network Viewer ccooccccoccccccncoonococnconcononnonncnonacononnconcnonans 57 SO EEE EN E o UE a A ME 57 As DA ENE EEE A NE eee 57 23 Installation ONE POT Mie 58 FE EVE VV ICO SR 59 7 4 1 Main User Interface iessinciacnawnnasonaduncacnauniatenatunaacntunbasensiabsanndantadentiehseantantadentiabsscntantadentabiacniantuaeits 59 P22 GONT Or BURON ee 59 7 5 Search ana Playback WiINGOW RS 61 Td NAIA SOF IMC Macia 61 152 MAT CO Panel AAA AAA ae 61 7 6 Setup of SpecoTech Multi Client coooccccccnnccccnnccncncconnnonncnnnnnnnnnnononncnnnnnnnnnnnnnnnnnnnnncnnnncnnnanens 63 FER og VE 21 5 EE EEE 63 A en eee ee ee een ee ne eee eee 64 TE ROCO ue 65 A A O OO OO PO nin AMD olan ata Nin Seam olan stata dda ain aawaehe 66 FOSNES 66 TE NL PS 67 TT Remote SAN rer 68 ET ES EE NERE EE EE ENE ENE EE AIA NE EE E ee 69 FET 2e ROCO MD MD MD 70 TT IDET 71 A Un II O 71 TSN 72 TEEN 72 HETT ES 8 61 0 RER SR tne E eee cee ne ee eee ee ee eee 73 7 71 82 Mole UPA Osuna iii a 73 TO NNN 74 7 8 1 Addition Delete and Modify of DVR SltesS occcccccccncccncccncconoconocononnnnonnonnnonanonnnnnnnnnnnnonnnnnnnos 74 782 GOMMECE and DISCO NE Re 76 T Soul mage Capture DUNA LNG ve 77 7 8 4 Recording Video on Local PC During LiVe ccoccccccnccccccoccccncnonanonnnnconcnon
59. osite 1 0Vp p 75ohm Input e Format NTSC PAL er le Loss Check Ves 1 VGA 1024x768 1280x1024 Selectable a amp Input amp Output 4 CH Line input amp 1 CH Line output EZ 4 NC NO Selectable Alarm 1 Alarm Out by Sensor Motion and Video Loss mme oe me SE EE Recording by channel s l Yes Resolution Pre Recording 1 fps for up to 20minutes before an event Post Recording 10 seconds to 3 minutes after an event Display Frame Rate Sec NTSC 30fps CH 60 fields PAL 25fps CH 50 fields Playback Single channel x2 4 8 16 32 64 Playback Speed Multi channels OAS 16 37 a ae te Search Mode Timeline Event Archive Log Interface Type Serial ATA D4RS D4WRS Max 1 TB Capacity of 1 HDD GE Max 2 TB Internal HDD No HDD No USB Port 2 Front 1 Rear 1 Video Storage USB Flash drive Video amp Still Image Backup Video amp Still Image Huge Backup Yes up to 24 hours Menu Display GUI User I F Input Method Remote control Mouse RS 485 PTZ control 1 RS 485 1 RS 485 1 RS 485 Dynamic DNS Yes Free DDNS 10 100 base TX Network Interface 10 100 1000 base TX Ethernet RJ 45 Ethernet RJ 45 Network CIF 60fps 4CH CIF 120fps 8CH CIF 240fps 16CH Max Network Playback Streaming CIF 30fps 1CH CIF 30fps 1CH CIF 30fps 1CH Web Viewer 1 1 Live Search Backup Remote Setup PTZ control Network l l Mobile Phone Viewer 1 1 Live Search PTZ control Access Mu
60. press SEL Adjust the zoom UP DOWN focus LEFT RIGHT position using the AW and gt buttons select OSD to enter the menu Control keys are Right Left UP Down Select Far REW KEY and Near FF KEY Press the ESC button to return to the previous menu Press the PTZ button to close the OSD menu Press the right key gt to start auto scan Press the left key lt to stop auto scan Select PRESET then press the left key A number input window will appear Set the number 3digits using the number key then press the SEL to confirm the preset number for the current position Press the right key gt and enter the number 3digits to go to the preset position Select TOU and press the right key A number input window will open Select a number 1digit using a number key then press SEL to start the tour Press the left 4 key to stop the tour Preset the number of the tour group in the OSD menu NUMBER For the TOUR and PRESET menu Press ESC to return to the main menu 46 5 2 Digital Zoom in Live and Playback Screen RS series supports Digital Zoom feature during live and playback mode 1 Double click the target channel 5 3 SEARCH Screen To enter the search screen menu select SEARCH menu on the screen using the mouse or press SEARCH icon on live screen Figure 5 3 1 Search Screen There are 7 ways of search menu such as EZSEARCH TIME LINE Calendar EVENT GO TO FIRST TI
61. rted 10 100 1000Base T Direct X 10 or higher Before installing the program check the PC specifications The DVR remote software may not perform correctly if the PC does not meet the minimum requirements 57 7 3 Installation of the Program 1 Insert the provided CD in the CD drive and double click SpecoTech Multi Client XXXX exe ya AA 2 Select a destination folder and click Next InstallShield Wizard Choose Destination Location Select folder where Setup will install files Setup will install SpecoT ech Mult Client in the following folder To install to this folder click Next To install to a different folder click Browse and select another folder Destination Folder ES peco Technologies 5pecoTech kult Client Browse InstallShield lt Back Cancel 3 Select the program folder and click Next InstallShield Wizard Select Program Folder Please select a program folder Setup will add program icons to the Program Folder listed below You may type new folder name or select one from the existing folders list Click Next to continue avast Free Antivirus EMS DTS 403 Filter DYR InstallShield Back Cancel 4 The installation status screen is displayed 5 After the installation is completed SpecoTech Multi Client icon displays on the desktop screen SpecoTech Multi Client 98 7 4 Live Window When installation is completed double click
62. s for the camera PTZ controller CHANNEL Channel connected to a PTZ device CAMERA Protocol Type SPEED 19200 14400 9600 4800 2400 Baud rate ID 0 63 Controller Keyboard Controller If a PTZ controller is used select a controller protocol from Controller menu Set SPEED Baud Rate and ID number CONTROLLER SPEED me ID VC PROTOCOL WTX 1200A CHANNEL pa CAMERA SPEED ID E I 4 4 3 Spot Out SPOT ON EVENT SPOT EVENT DWELL TIME SEQUENCE SEQUENCE DWELL TIME SPOT CHANNEL CANCEL Figure 4 4 6 SPOT OUT Setup Screen Table 4 4 4 Menu Item in SPOT OUT Setup Screen Item Description SPOT OUT Only 1 Spot Out is available to use To use the Spot out function on D4RS Video Resolution has to be setup as 1280x1024 Video Resolution Output can be setup on DISPLAY MENU SPOT TYPE SPOT 1 supports only FULL type 1 channel only SPOT ON EVENT Enable disable channel change if an event occurs on a channel 29 SPOT EVENT Set the dwell time for the display of the event activated channel DWELL TIME 1 10sec SEQUENCE Enable disable sequential display of spot channel in full screen If select ON the selected channel will be displayed on the monitor periodically SEQUENCE Set the dwell time for the spot channel display 1 10sec DWELL TIME SPOT CHANNEL Select a channel for spot monitoring using the mouse or the control button on the remote control and press OK button
63. se or the control button on the remote control to change the date and time value and press the PLAY button after setting If there is no video data in the set date and time No Data Exist message displays 5 3 7 Archive List The ARCHIVE Search window is used to find previously stored video or images lt PREV DISPLAY CLOSE Figure 5 3 11 Archive Search Screen When the Archive menu is selected the user can see a calendar which has recording data Select a specific date and then the archived data will be displayed Press the Display button to view the still image or the first frame of the selected video then the user can save the selected data 50 5 3 8 Log List You can access the LOG list search screen by selecting LOG on the SEARCH window Date eping ntp time is ear 11 02 2011 03 00 39 SECOND 11 02 2011 08 18 43 FOURTH 11 02 2011 08 19 16 FIRST 11 02 2011 15 44 19 THIRD 11 02 2011 15 44 21 11 02 2011 15 49 15 FIRST 11 02 2011 15 49 15 SECOND 11 02 2011 15 49 15 THIRD 11 02 2011 15 49 15 FOURTH 11 02 2011 15 49 15 Figure 5 3 12 Log List Screen When the Log menu is selected the user can see a calendar which has a log data Select a specific date and press NEXT button and then the log data will be displayed Press the SAVE button to save the data and then the data is saved as a text file format 5 4 Play Mode During playback of a recorded event the mode changes from SEARCH to PLAY While in PL
64. ssword is 1111 E Select a site by checking the box and Press E button to connect to the site O speco technologies CH 2 NO VIDEO CH 3 CH 4 NO VIDEO NO VIDEO cao om os 2011 07 19 11 24 09 90 APPENDIX Network Connection Internet and DDNS Dynamic Domain Name System DDNS allows a domain name to be constantly synchronized with a dynamic IP address A current dynamic IP address is being associated with a static domain name IP Router or HUB 1 Goto SETUP gt NETWORK gt DDNS and set the DDNS SERVER to ON ENABLE DDNS HOST NAME SUBMIT UPDATE ezDDONS APPLY CLOSE If you set ezDDNS to ON the host name is automatically generated and registered 2 Goto SETUP gt NETWORK gt DDNS gt HOST NAME Manually enter a domain name using the virtual keyboard and click ENTER button HOST NAME 91 When a manual host name is completed Go to SETUP gt NETWORK gt DDNS gt SUBMIT UPDATE and select ON to submit the settings on the SPECO DDNS Once the setting is completed the DDNS address will be http hostname ddns specoddns net For example if you enter the host name as D4RS then the address will be ERE Hy al 1 PEN A k A E ail SA UCU WS be JE UUTIS IG When DDNS setting is done click the APPLY button Otherwise DDNS setting will not be applied When you exit SETUP menu DDNS NOTIFIY window will pop up DDNS NOTIFY STATUS SUCCESS STATUS FAIL
65. submenu Then the following window is displayed as below Select the REMOTE SETUP speco technologies CH 2 NO VIDEO CH 3 NO VIDEO eie Ce cn ce Then the setup window is displayed The specified menu screen is displayed on the upper left of the screen Enter the password of the DVR when prompted NOTE The default password is 1111 Setting is the same as with the DVR menu setting Refer to the corresponding pages for details on the setting items SPECO WEB SETUP w PASSWORD NOTICE Web Setup is prohibited when user in the Setup Menu on the DVR SPECO WEB SETUP ic49 PASSWORD THE SYSTEM IS NOT IN THE LIVE MODE REMOTE SETUP IS PROHIBITED AT THIS TIME 68 7 7 1 System Select System to set system and time settings RECORD DEVICE DISPLAY NETWORK USER MANAGEMENT STORAGE UPGRADE DATE DISPLAY FORMAT MMDDNYYY Tr CLIENT ACCESS ON OFF NTP SETUP OFF PRIMARY SNTP SERVER Pool ntp ong SECONDARY SNTP SERVER TIME ZONE GMT 0 00 Lisbon London ionaco CONNECTION MODE ME CONNECTION PERIOD 3 00 AM SEND EMAIL SETUP TRANSMISSION MODE IP NOTIFICATION MAIL BY SENSOR MAIL BY MOTION MAIL BY VIDEO LOSS MAIL BY S M A RT MAIL BY STATUS PERIOD ep Je els 9 s13 3 KI EI EVEN EVEN EI a rm ar El E ap tala MAIL PORT SECURE OPTION MAIL TO MAIL SERVER ID PASSWORD MAIL FROM UNIT NAME r m 4 e DATE DISPLAY FORMAT Select the date display format
66. the Apple App Store is 2 Search Speco Player in the App Store Notice SPECO Player is for the RS WRS and HD series DVRs SPECO VIEWER is not compatible with the T Series DVR s TH TN or TL or the PC Series DVR s 9 1 1 Live 1 Open the installed Speco Player App and select the Live Preview Then click the menu button of the phone to add a remote device 2 Select the registered device and select the channels to monitor up to 4 channels Select Mode as Live and click Connect P mi AT amp T gt 11 58 AM OQ 90 at iUMS 1 2 0 Demo Edit Select channels Max 4 channels Peri le 14710 10 Auto Reconnect on F j l Live Connect m Site Information Site Demo IP DNS 192 168 1 23 3 The app will display the selected channel s Double tap the channel screen to switch 1 channel display to 4 channels split display or vice versa 85 atl AT amp T gt 11 58 AM Q 90 had 10 3 2 PTZ Control To control the PTZ functions of the camera tap the menu button Then PTZ menu icons will display Using the PTZ icon on the screen control PTZF control sal AT amp T F 1158 AM Q 90 mab wth ATET F 11 58 AM Y 90 mae ZOOM FOCUS 100M FOCUS 10 3 3 Playback 1 Select the registered device and select the channels up to 4 channels to search and playback Select Mode as Playback and click Connect Then the search window will display EMOS 1
67. ult settings LOAD DEFAULT WARNING Are vou sure to load default co If YES system will restart The following settings such as Language DVR ID Security User Authentication Security User P W Date format DLS settings Network settings HDD overwrite Limit recording HDD serial number and HDD ERROR time will not be included LOAD Press the button to reset the system to the factory default settings FACTORY DEFAULT WARNING Are vou sure to load factory default conf g If YES system will restart YES SOFTWARE Upgrade softeware to the latest version UPGRADE After connecting USB flash drive to USB port on the DVR click SEARCH It will automatically find the upgrade file 41 4 9 1 Firmware Upgrade 1 Create a new folder named upgrade in the USB flash drive root directory 2 Create sub folder for each model under upgrade folder and copy each firmware e d4rs for D4RS and D4WRS main D4RS speco 201 e d8rs for DBRS and D8WRS main D8RS speco 201 e d16rs for D16RS and D16WRS main D16RS speco 201 TE _ del p _ SER Date modified 12 15 2011 8 55 AM File folder 12 15 2011 8 56 AM File folder El Recent Places di 12 14 2011 1 20 PM File folder 4 3 Libraries Plug in the USB flash drive on the rear panel Navigate to CONFIG menu of SETUP Select SOFTWARE UPGRADE Follow the procedure from Figure 4 9 2 to Figure

Speco Technologies D16RS 1TB

Contents

Download Pdf Manuals

Related Search

Related Contents