Thomson 40FT5453 LED TV
Contents
1. 1 Press Menu on the remote control and select Setup gt Input settings 2 Press OK gt to enter Input settings 3 Press A V to select a connector your equipment is connected to 4 Press lt P to select the type of apparatus attached to this connector 5 Press Menu to return to the Setup menu After configuring the selected source label will be displayed after the name of the related connector in the source list when pressing Source on the remote control or OK on the TV set Note Not all models have OK button on the set Use Electronic programme guide EPG is an on screen guide that displays scheduled TV programmes You can navigate select and view programmes 1 Press Guide on the remote control the Now and Next EPG menu will appear which allows you to get the knowledge about the current or next programme playing on each channel Navigate through the different programmes using navigation buttons on the remote control 2 Use the colour buttons to view 8 Days EPG Prev day Red List the previous day s EPG Next day Green List the next day s EPG View detail Yellow Display the description about this programme if available Type filter Blue Programme guide filter for digital TV programmes e Press the blue button to display the programmes s type and subtype list e Navigate through the different types and subtypes using navigation buttons on the remote control Select one or more types whi2. Clock gt Auto synchronization 2 Press lt P gt to select On Assign a channel decoder Decoders that decode analog channels can be connected to AV connector Assign the TV channel as a channel to be decoded Then assign the connection where the decoder is connected 1 Press Menu on the remote control and select Setup gt Decode 2 Press OK gt to enter the list 3 Press A V to select the channel to decode 4 Press OK to select or unselect the channel 5 Press Menu to return to the previous menu Diagnostics on digital TV channels 1 Press Menu on the remote control and select Setup gt Diagnostics 2 Press OK P to display some signal information on current digital channel such as signal strength frequency etc Time shift Allows you to record the TV programme so that you won t miss the favourite part even if you go out Before you use the function connect a USB device to the TV first For the first time you should do the disk setup for the USB device 1 Press Menu on the remote control and select Setup gt Time shift 2 Press lt P gt to select On to switch on the time shift function then press Exit to close the menu 3 Press Option on the remote control and select Time shift then press OK to confirm 4 Follow the directions on the screen to do the setup 5 After the disk setup is done press Option and select Time shift 6 Press OK to display the time shift menu Press the red b
3. USB connectors are for data m 7 input from USB storage i devices e e l Excessive sound pressure Le CJ from earphones and fi K headphones can cause F hearing loss g IE E Number of HDMI may vary HD game ca console T z f H DVD player A Home theatre system JH a Blu ray Disc player BD a HD Camcorder os Dm Network 4 ees Note Before connecting a x Sonnecuom PC set the PC monitor sage Notes 2 A refresh rate to 60Hz The figures are for representation only a Not all connections available on all models E The location of the power socket on the TV may vary according to TV model The positions and names of the function buttons and connectors on the TV may vary according to TV model lt 2 2 ui Remote control functions Getting started Most of your television s functions are available via the menus that appear on the screen The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings Source To select connected devices Standby quit standby 0 9 To select a channel page or setting ECO To select desired power saving mode Guide To toggle the Electronic Programme Guide on or off only available for digital channels Menu To access the main menu to return to the previous menu Exit To exit the menu structure or Teletext AY To navigate in the main menu to select menu options to switch to
4. audio device through the SPDIF output Press Menu on the remote control and select Options gt SPDIF type Select a proper sound type from the list for digital programmes EN Use more of your TV If the current programme outputs sound in Dolby D format then either PCM or Dolby D can be selected If the current programme does not output sound in Dolby D format only PCM can be selected Otherwise no sound will be output Select Off to turn off the audio output from the audio device connected to the SPDIF output Note The options you may choose depend on the programme you are watching If you select PCM and the sound output is prior to the picture you can select SPDIF Delay from the Options menu and press lt to adjust the delay time to synchronize the sound with the picture T Link To search for CEC devices connected to the HDMI sockets in your TV and enable one touch play and one touch standby between CEC devices Enable or disable T Link 1 Press Menu on the remote control then select Options gt T Link 2 Press lt P gt to select On or Off Use one touch play One touch play enables you to press the play button on for example your DVD remote control This starts playback on your DVD device and automatically switches your TV to the correct source displaying DVD content Use system standby System standby enables you to press the button on for example your TV remote control This switches
5. designed and manufactured with high quality materials and components which can be recycled and reused This symbol means that electrical and electronic equipment at their end of life Mmmm Should be disposed of separately from your household waste Please dispose of this equipment at your local community waste collection recycling centre In the European Union there are separate collection systems for used electrical and electronic product Please help us to conserve the environment we live in Getting started Connect the power and antenna To switch on TV after connecting power cord press or POWER O Note Position of power socket varies according to TV model On certain models you have to turn on the power switch first Tv 75 0 DVD recorder cable receiver TV u 4 i Note Disconnect the power cord before connecting devices DVD recorder Set top box Blu ray Disc player headphones HD game A E Or use an HDMI connection EN console amp HD camcorder iT Tv we g i 1 Notes
6. music if available 1 Select Media center gt Music then press OK to enter the main file content browser 2 Use A lt gt to select a song in either main or sub file content browser in the same way as in photo display function press Menu to display the music menu in the folder mode Sort Sort folders and songs by Name Genre Artist or Aloum Edit Copy paste or delete a selected song Parser You can select Recursive to display songs from all sub file folders 3 Select a song press OK to play and an automatic playback begins from the selected song Press Menu to display the music menu in the browser mode You can play or pause the song select different play mode etc 4 Press the related buttons on the remote control to perform the available functions shown on the function bar at the bottom of the TV screen Video To watch videos if available 1 Select Media center gt Video then press OK to enter the main file content browser 2 Use A lt gt to select a video in either main or sub file content browser in the same way as in photo display function press Menu to display the video menu in the folder mode Sort Sort folders and videos by Type modification Date or Name Edit Copy paste or delete a selected video Parser You can select Recursive to display videos from all sub file folders EN Use more of your TV 3 Select a video press OK to watch and an automatic playback be
7. stopping time of recording Schedule type e set Reminder to inform you that you can switch to the scheduled programme when the time you set comes When time out and you don t execute any operation the dialog box will disappear and no further operation will be executed set Record to check if you really want to start your scheduled recording when the time you set comes When time out and you don t execute any operation scheduled recording will start automatically Repeat type set different repeat mode of recording 4 Press A lt gt to select Add then press OK to add the schedule you set into your schedule list 5 Press the red button to repeat above procedures to add another schedule 6 If you wish to edit or delete a schedule select it and press OK to enter 7 Press Exit to close the menu 2 2 ui Share amp See Note This manual covers products with either Share amp See or DLNA function Share amp See is DLNA compatible Connecting to a wired network To be able to use the Share amp See advanced function of your TV you will need a wired connection to a router This requires a network cable or Ethernet cable to be connected to your router The other end of the cable is to be connected to your LAN local area network port on your TV Connect your PC to your router too Follow the steps in turn specified hereafter then you can enjoy recorded video picture music and or text files s
8. Chapter 1 Important information Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identification sticker located at the back of your set Where the mains plug or an appliance coupler is used as disconnect device the disconnect device shall remain readily operable On certain models the light indicator is located at the side of the TV set The absence of a light indication at the front does not mean that the TV set is fully disconnected from the mains To disconnect the TV set completely the mains plug must be pulled out The TV set s components are sensitive to heat The maximum ambient temperature should not exceed 35 Celsius Do not cover the vents at the back or sides of the TV set Leave sufficient space around it to allow adequate ventilation Install the appliance away from any source of heat fireplace or appliances creating strong magnetic or electric fields Moisture in rooms where the set is installed should not exceed 85 humidity Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Moving the set from a cold place to a warm one can cause condensation on the screen and on some components inside the TV set Let the condensation evaporate before switching the TV set on again WARNING To prevent the spread of fire keep candles or other open flames away from this product at all ti
9. aved on your PC Network setup 1 Press Menu on the remote control and select Options gt Network gt Configuration gt Internet connection Press lt gt to select On 2 Select Options gt Network gt Applications gt 10 Share amp See then press lt gt to select On new one 3 Select Options gt Network gt Configuration gt IP The super password is 0423 If you forget your code setting then press OK gt to enter the IP setting enter the super password to override any existing menu codes Set Address type to Auto it will acquire and enter the needed IP address automatically You can follow below steps to enter your IP address manually Set Address type to Manual then press Y to go to the first entry field Enter the IP address Subnet mask Default gateway Primary DNS and Secondary DNS values Use the digit buttons to enter numbers and the arrow buttons to move from one entry field to another 4 Select Options gt Network gt Configuration gt Connection test then press OK to check the Internet connectivity If success Share amp See will be on Otherwise you need to check if the IP address is available and or if you ve already allowed your TV to share the designated files on your PC 5 Select Options gt Network gt Configuration gt Information then press OK gt to display the information on current connection such as Interface Address type IP address etc Adding me
10. ch you want to highlight from the Type list press OK to select or unselect A checkmark will appear to the left of the type when selected When you select a type all its subtypes will be selected accordingly Also user can select some desired subtypes without selecting any type first e Press the blue button to exit the type and subtype list After filtering all your desired digital TV programmes will be highlighted 3 Press Guide Exit to exit the EPG and switch to the selected channel PVR Personal Video Recorder Allows you to record your favourite TV programme Before you use the function connect a USB memory device to the set first Note Due to specific country requirements the PVR function is not available for Finland 1 Press Option on the remote control and select Quick access gt PVR 2 Press OK P to enter 3 Press the red button to start recording the record file is put into a PVR folder in Media center gt Video and named after the channel number the green button to stop recording manually if the recording duration finishes the recording will stop automatically AIV lt P to adjust the recording duration 4 In recording PVR mini pane will also show on the screen to indicate the recording progress 5 To watch the recorded programme exit PVR mode first and go to Media center gt Video Select the folder PVR then select the related record file Press OK to play It is the same i
11. compatible with USB 2 0 standard so it may not work with the TV multimedia player Not all USB keys or devices are compatible for the USB function Not all above formats are supported The encoding formats of your files will determine whether or not they can be used When a USB device is detected it enters the Media center menu directly Photo To display photos if available 1 Select Media center gt Photo then press OK to enter the main file content browser 2 In the main file content browser use A W lt P gt to select a photo or an inner file folder 3 Select an inner file folder press OK to enter a sub file content browser 4 Use A lt gt to select a photo in either main or sub file content browser press Menu to display the photo menu in the folder mode Sort Sort folders and photos by modification Date or Name Edit Copy paste or delete a selected photo Parser You can select Recursive to display photos from all sub file folders 5 Select a photo press OK to watch and a slide show begins from the selected photo Press OK to pause the photo if you want to rotate the paused photo Press Menu to display the photo menu in the browser mode You can play pause or rotate the photo select different play mode and displaying effect etc 6 Press the related buttons on the remote control to perform the available functions shown on the function bar at the bottom of the TV screen Music To playback
12. d digital channels 1 Press Menu on the remote control and select Setup gt Language gt Menu language Press lt gt to select your desired menu language Press Menu to return to Setup press A to select Country then press lt gt to select your country The TV installs and arranges channels according to your country Press A to select Tuner mode then press lt gt to select Air or Cable Select Air e Press A to select Channel install and press OK gt to enter Select Automatic search Refer to Figure 2 then press OK P to display Automatic search e Press OK to skip the country selection and enter the next step Or use lt P to reselect your country then press OK to enter Select Digital amp Analog Digital or Analog then press OK gt to start the automatic search which relates to all DVB T digital and or analog channels Select Cable e Press A to select Channel install and press OK P to enter Select Automatic search then press OK gt to display Automatic search e Press OK to skip the country selection and enter the next step Or use lt P to reselect your country then press OK to enter Select Digital amp Analog then press OK P to enter Select your scan mode if available and configure proper cable information in the same way as in Initial setup Select Scan and press Chapter 3 amp 4 OK gt to start your automatic search relating to all DVB C digital a
13. d only the analog chanels could be caused by poor broadcasting and therefore is not covered by manufacturer warranty Manufacturer cannot be held responsible for lack or poor broadcasting in some areas The first time you switch the set on the Initial setup wizard opens which guides you through the initial setup process Refer to Figure 1 Press OK to start your initial setup 1 Press A to select your language then press OK to enter the next step 2 Press A to select your country then press OK to enter the next step Note When select France you will have to enter the Password setting menu here in order to set a password Use the digit buttons to enter a four digit number for your password 0000 is too simple to be set as your password Re enter the same code to confirm the password After that you will enter the next step automatically In this step you can only press lt to return to the previous step 3 Press A to select your tuner mode Air or Cable Select Air Press OK P to enter e Press A to select Scan then press OK gt to automatically start the search relating to initial setup for all DVB T digital and analog channels Select Cable Press OK P to enter e Press A to select Scan then press OK gt to directly start your initial setup or enter below step e Select Full if available to search for and store all DVB C digital and analog channels e You may select other advance
14. d scan mode if available for example Advanced or Quick then configure proper cable information as described below Use the digit buttons to adjust the values of frequency symbol rate and network ID use lt gt to select certain modulation mode e Press OK to start initial setup relating to all DVB C digital and analog channels Note To prevent the channel setup process from being interrupted wait for the message EN 4 Before start the scanning you can also select Skip 7 Install channels indicating that the setup is complete lt 2 2 ui scan to skip the initial setup progress During the setup you can follow the hints available at the bottom of the screen to return to the previous step by pressing lt Or press Exit to exit or interrupt the search halfway Once the automatic search ends the set enters the next step automatically You can press A V to select your location Shop or Home Press OK gt to confirm your selection and enter the last step In this step you can press OK to exit the initial setup The channels are arranged in a preset order If you wish to skip channels modify the preset order or rename channels select Setup gt Organiser and press OK gt to enter In this step you can also press lt to return to the previous step Automatically install channels This section describes how to search and store channels automatically Instructions are for both analog an
15. d sides regularly Using solvents abrasive or alcohol based products could damage the TV set If an object or liquid enters inside the appliance unplug it immediately and have it checked by an authorized engineer Never open the appliance yourself since this may put you at risk or damage the appliance Hanging the TV set on the wall Warning This operation requires two people To ensure a Safe installation observe the following safety notes Check that the wall can support the weight of the TV set and wall mount assembly Follow the mounting instructions provided with the wall mount For certain models make sure to screw the hexagonal VESA wall mounting screw bosses and screws provided with the set into the nuts for the wall mount at the back of your set before your wall mounting The TV set must be installed on a vertical wall e Make sure to use only screws suitable for the material of the wall Make sure that the TV set cables are placed so that there is not danger of tripping over them All other safety instructions about our TV sets are also applicable here Handling the TV set on the table Before setting up your television set make sure that the surface you want to put the set on can support its weight Don t place the set on an unstable surface e g moving shelf very edge of a unit and make sure that the front of the television set does not overhang the surface it is sitting on This product is
16. dia from your PC for sharing Install a DLNA media server in your PC The simple and familiar server you may install is Microsoft Windows Media Player 11 1 Open Microsoft Windows Media Player 11 Select Library gt Media sharing Check the checkbox Share my media to Select the icon of the TV set connected to your PC Select Allow to allow the TV set to access your PC and select OK to enable your allowing Note You can push Settings button to customize your desired settings 2 Select Library gt Add to Libray Select your personal folders or folders of other users that you can access for sharing Select Add and press OK to enable your adding Share amp See application Press Menu on the remote control and select USB then press OK to launch Share amp See applications Stopping Share amp See function 1 Select Options gt Network gt Configuration gt Internet connection and set it to Off 2 Or select Options gt Network gt Applications gt Share amp See and set it to Off Notes for password in Parental Control Lock function The default password is 1234 You can change it to a Design and specifications are subject to change without notice EN 11
17. e control and select Picture gt ECO dynamic back light 2 Press lt gt to select desired power saving mode to achieve desired power saving effect At this time the Picture preset option under Picture will be set at Personal synchronically 3 Press Exit to close the menu Shortcut operation Press ECO on the remote control to perform the same function mentioned above PAP function To display the pictures from different source inputs side by side Note that one window is for both analog and digital TV inputs the other is for VGA HDMI and CMP inputs Note AV input is invalid for both windows 1 Press Menu to display the main menu 2 Select PAP and press OK to enter 3 Select the PAP option and press lt P gt to turn on off PAP function 4 Select TV position press lt gt to reposition the TV window 5 Press lt P to toggle the focus window 6 When focus on TV window the digit buttons and P work in TV When focus on the other window P can change available extension sources Use subtitles You can enable subtitles for each TV channel Subtitles are broadcast via Teletext or DVB T DVB C digital broadcasts With digital broadcasts you have the additional option of selecting a preferred subtitle language Turn on off subtitles 1 Press Menu on the remote control and select Options gt Subtitle 2 Press OK to enter Refer to Figure 4 3 Select the Subtitle option and press lt gt to
18. f you record a digital radio programme Notes When Cl card is used PVR function will be disabled Only available for digital channels Only support USB memory device of FAT32 format Before you plug the USB device to the set make sure you have backed up the data in the device to avoid the loss of your important data due to unforeseen malfunction The bigger size of USB memory device for PVR function the longer you can record the programme If changing channel or signal source in recording store the recording data and execute the channel or signal source change The set can not play files normally if the parameters of the file exceed the limitations of the system the file format is not supported the file is damaged or the file can not be decoded Do not unplug the USB memory device when the system is reading a file or transmitting data otherwise the system or the device may be damaged EN Use more of your TV Schedule list This function is used to perform scheduled recording 1 Press Option on the remote control and select Quick access gt Schedule list 2 Press OK P to display the schedule list 3 To add a schedule into your schedule list press the red button first to display Schedule list Then Channel number use lt gt to select the channel number Start date use the digit buttons to set the recording date Start time set the starting time of recording Stop time set the
19. gins from the selected video Press Menu to display the video menu in the browser mode You can play or pause the video select different play mode screen mode and preset picture settings etc 4 Press the related buttons on the remote control to perform the available functions shown on the function bar at the bottom of the TV screen 2 2 ui DivX video ABOUT DIVX VIDEO DivX is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies Obtain your registration code e Press Menu on the remote control Select Options gt DivX R registration e Press OK P and your registration code will be displayed Go to vod divx com for more information on how to complete your registration Deregister your TV If you wish to deregister your TV e Press Menu on the remote control Select Options gt DivX R deactivation e Press OK and a message will guide you DivX DivX Certified DivX Plus HD and associated logos are trademarks of DivX Inc and are used under license Time detection You can detect the time from digital channels through following operations 1 Press Menu on the remote control and select Timer gt
20. he latest software Follow the hints on the screen to complete During EN Use more of your TV the scan press OK Exit to cancel or exit the process Change to Shop or Home mode 1 Press Menu on the remote control and select Options gt Location 2 Press lt gt to select your location Shop or Home 3 Press Exit to exit MHEG function Some digital TV broadcasters offer dedicated digital text or interactive services for example BBC1 These services work like normal Teletext with the addition of number colour and navigation buttons 1 Press Menu on the remote control and select Options gt Subtitle gt Subtitle 2 Press lt gt to set Subtitle to Off Note MHEG and subtitles are mutually exclusive and cannot coexist on the same screen If Subtitle is set to On MHEG will not appear Press the red button or TEXT on the remote control Press A lt gt to select or highlight items Press OK to confirm or activate Press one of the colour buttons to select an option Press TEXT or Exit to exit NOOR Ww View photos play music and watch videos from a USB storage device Your TV is fitted with a USB connector that enables you to view photos listen to music or watch videos stored on a USB storage device Supported file formats Photo JPEG Music MP3 Video AVI MP4 MPG MPEG TS DIVX MKV Notes Some USB keys and USB products like digital cameras or mobile phones are not fully
21. ke If the batteries in your remote control are run down you can use the buttons on your TV set In TV mode they have the same functions as the corresponding buttons on the remote control In the menus they have the following functions For models with OK button on the set PR orPRA PR or PRY VOL lt 1 or VOL gt VOL 14 or VOL lt MENU or OK Switching on off and standby mode Switch on off your TV When powered on the TV will be turned on directly To switch it off unplug the mains socket from the mains outlet Switch to standby Press the or POWER button on the set or the button on the remote control The TV set remains EN For models without OK button on the set PRt torPRA PR or PRY VOL 14 or VOL gt VOL 11 or VOL lt MENU or powered up but with low energy consumption Switch on from standby Press the or POWER button on the set or the button on the remote control to switch the television on at the last channel in the last mode i e analog or digital or AV programme you were watching On certain models you have to turn on the power switch first Chapter 2 Initial setup Initial setup involves selecting all the settings required to be able to search for and store all the analog and digital channels you can receive Make sure that the television is switched on and follow all the steps in turn specified hereafter Note TV channels search retrieve
22. mes The amp or POWER button on the TV set or the button on the remote control can be used to switch it on and put it into standby mode If you are not going to be watching the TV for a lengthy period of time switch it off completely by removing the plug from the mains power socket During thunderstorms we recommend that you disconnect the TV set from the mains and aerial so that it is not affected by electrical or electromagnetic surges that could damage it For this reason keep the mains and aerial sockets accessible so they can be disconnected if necessary Unplug the TV set immediately if you notice it giving off a smell of burning or smoke You must never under any circumstances open the TV set yourself as you run the risk of an electric shock in doing so TV screen The TV screen used in this product is made of glass Therefore it can break when the product is dropped or impacted upon by other objects The TV screen is a very high technology product giving you finely detailed pictures Occasionally a few nonactive pixels may appear on the screen as a fixed point of blue green or red This does not affect the EN Getting started performance of your product Care Use a glass cleaning product to clean the screen and a soft cloth and mild detergent to clean the rest of the set Important Using strong detergents alcohol based and abrasive products may damage the screen Dust the vents at the back an
23. nd analog channels Select Digital then follow the similar process described above to start your automatic search relating to all DVB C digital channels Select Analog then press OK gt to start your automatic search relating to all analog channels 4 The search may take a few minutes During the process you can press Menu to abort halfway 5 Once the automatic search ends press Menu to return to the previous step or press OK to restart your channel search 6 After the automatic search channels are arranged in a preset order You can skip channels modify the preset order or rename channels Use your TV Access channels Using the digit buttons press the corresponding digit buttons to access the channels Using the PR or P buttons scroll through the channels Watch connected devices Press Source on the remote control or OK on the TV set to switch between TV and other input sources To resume TV viewing press any digit button to enter the channel while P will cycle through all TV channels and other input sources Note Not all models have OK button on the set Volume Volume control use the VOL or VOL lt gt buttons on the TV set or V buttons on the remote control to increase or decrease the volume Sound mute press the Mute button to temporarily mute the sound Press this button again or the V button to restore it Use TV menus 1 Press Menu to display the main menu Refer t
24. o Figure 3 2 Press A W lt P to select the desired item then press OK to open the corresponding submenu 3 In submenus use A V to select menu options use lt P gt to set functions or change values Use OK to activate a setting Use OK P to open the corresponding submenu Press Menu to return to the previous menu Press Exit to close the menu ap Note Some options may be not available for certain signal sources EN Use your TV amp Use more of your TV Select menu language You can choose your preferred menu language following below instructions Press Menu to display the main menu 2 Press A lt gt to select Setup then press OK to enter 3 Select Language and press OK P to enter 4 Select Menu language and press lt P to select your desired language to display the menus 5 Press Exit to close the menu Use more of your TV Setup your favourite channels You can create four lists of your favourite TV channels 1 Press LIST 2 Press the yellow button to enter Channel list selection Press A V to select the favourite list you want to set up your favourite channels Then press OK to enter the selected list 3 Press the blue button to start to edit your favourite list Press A V to scroll through the channel list and press OK to select or unselect it 4 Repeat this procedure to setup other favourite channels 5 Press LIST Exit to exit ECO dynamic backlight 1 Press Menu on the remot
25. select On Off to turn on off subtitles Enable subtitle languages on digital TV channels 1 Press Menu on the remote control and select Options gt Subtitle gt Digital subtitle language 2 Press lt gt to select a subtitle language as your preferred language 3 Press A to select Digital subtitle language 2nd 4 Press lt gt to select a secondary subtitle language 5 Press Exit to close the menu Shortcut operation Press SUBTITLE on the remote control to directly select a subtitle language available for selected digital TV programme Select a subtitle type on digital TV channels 1 Press Menu on the remote control and select Options gt Subtitle gt Subtitle type 2 Press lt gt to select a subtitle type You can select Hearing impaired to display the hearing impaired subtitle with your selected language Select decoding page language in Teletext Press Menu on the remote control and select Options gt Decoding page language Select a proper type of language in which Teletext will display Digital Teletext language For digital TV channels your TV could zap to a service with multiple initial Teletext pages in different languages This function allows you to select an available language as primary language which relates to different initial Teletext page Press Menu on the remote control and select Options gt Digital teletext language Press lt gt to select SPDIF type Connect to an
26. te Do not remove the common interface module from the slot Removing the module will deactivate the digital services Access common interface services After inserting and activating the common interface module press Menu on the remote control and select Options gt Common interface This menu option is only available if the common interface module is correctly inserted and activated On screen applications and content are provided by your digital TV service operator Software update Press Menu on the remote control and select Options gt Software update Press OK P to enter Refer to Figure 5 Current version Checks the current version of the software Product name Displays the product name of your set Serial number if available Displays the serial number of your set OAD over air download Enables you to install the latest version of the software if available Select OAD and press OK gt to enter the Setup menu Use lt gt to select Yes under Auto download to automatically download the latest software if available After the software has been downloaded successfully you will be prompted to decide if you want to install it right now If yes follow the hints on the screen to complete your installation You can also select to ignore the installation here Select No under Auto download to decline the automatic download Select Manual OAD download and press OK gt to start manual scanning t
27. the previous or next photo song or video in USB function lt gt To navigate in the main menu to set Zoom functions and change values can also be used to open the corresponding submenu To select the picture format Note You are recommended to use the full screen mode Do not use the display mode with black bars on both sides of the picture such as 4 3 for long time otherwise the TV screen may be damaged permanently OK To open the corresponding submenu and activate a setting in menus to freeze Important unfreeze the picture in digital TV mode Option To display the function menu to perform certain operations to display the Teletext page in different mode Return To return to the previous channel to return to the previous menu in USB function V To control the volume Info To display programme information if available Mute To switch the sound off and back on again P To change channels TEXT To toggle Teletext on or off SUBTITLE To select a subtitle language available for selected digital TV programme LIST To display channel list TV To access TV mode Colour To select tasks or Teletext pages The buttons red button can also be used for MHEG function O Lang To select a sound type available for selected analog TV programme to select an audio language available for selected digital TV programme Battery shall not be exposed to excessive heat such as sunshine fire or the li
28. utton to pause the picture and begin the time shift Press the red button to play the recorded part When the time shift menu disappears and only the timing of the time shift remains on the screen you can press the red button or OK to call out the time shift menu Press the green button to fast backward or the yellow button to fast forward Press the blue button to quit the time shift function Notes Before you plug the USB device to TV make sure you have backed up the data in the device to avoid the unusual performance make your important data lost We recommend you use a USB device with the free file size bigger than 1Gb and disk speed faster than 5 0M sec The bigger file size for time shift the longer you can record the programme If changing channel in time shifting a message prompts to let you select Yes or No You can select Yes to exit the time shift function and execute the channel change Reset shop Allows you to reset the TV to factory default settings 1 Press Menu on the remote control and select Setup then press OK to confirm EN Use more of your TV 2 Select Reset shop and press OK P to enter Use the digit buttons to enter the password to enter 4 Press lt gt to select OK and press OK to confirm 5 The Initial setup menu appears Follow the related instructions oo Customising the input settings You can configure your TV according to the equipment you connect to it
29. your TV and all connected HDMI devices to standby mode Network update Press Menu on the remote control then select Options gt Network update Select On off to enable or disable the Network update function When this function is on the TV will automatically update channels if your DTV service provider updates his DTV network When this function is off you need to run channel searching again to get new channels or remove unavailable channels if your DTV service provider adds or removes channels from their DTV network Common interface Scrambled digital TV channels can be decoded with a common interface module and a card provided by a digital TV service operator The common interface module may enable several digital services depending on the operator and services you choose for example pay TV Contact your digital TV service operator for more information about services and terms Use the common interface module WARNING Switch off your TV before inserting a common interface module Be sure to follow the instruction described below Wrong insertion of a common interface module may damage both the module and your TV 1 Following the directions printed on the common interface module gently insert the module into the common interface slot on the TV 2 Push the module in as far as it will go 3 Turn on the TV and wait for the common interface function to be activated This may take several minutes No
Download Pdf Manuals
Related Search