SYBA SY-MRA55005 drive bay panel
Contents
1. Connection 1 Connect the SATA Power cable into the SY MRA55005 and connect the molex connector to the PC molex power plug and the small LED wire connector to the LED port at the back of SY MRA55005 2 Insert one end of the SATA data Power SATA Power cable to SY MRA55005 another Cable SATA Data end to either the motherboard LED LED Wire or the SATA RAID card Adapter 3 Plug your optical drive s signal cable SATA or PATA and power cable to your motherboard and power supply to Power Supply i Motherboard 4 Plug USB3 0 cable connector to the motherboard or USB 3 0 controller header pin Inserting the Hard Drive 1 Pull the key of HDD ROM gently from left to right to eject the panel 2 Put the 2 5 HDD into the SY MRA55005 3 close the front panel 1 After inserting HDD and closing the front door carefully A push the tray until it is seated into position Excessive force may damage its mechanical parts 2 If the HDD is inserted backward into the tray forcing the de2. 5 25 Drive Bay Adapter For Slim Optical Rom With 2 5 SATA HDD SDD Mobile Rack SY MRAS5005 CE Fe RA Fits in any 5 25 drive bay Two USB3 0 ports Unique screwless design for hot swapping 2 5 SATA hard drive Accommodates 12 7mm slim optical drive SY MRA55005 Manual SY MRAS5S005 Features e Elegant plastic panel design e Fits in any 5 25 drive bay e Two USB3 0 ports e Unique screwless design for hot swapping 2 5 SATA hard drive e Accommodates 12 7mm slim optical drive Specifications e Fit all 2 5 Serial ATA hard disk e Supports hot swap e Supports SATA III 6 0Gb s e Housing Assembly 138mm L x148mm W x42mm H e Interface SATA USB3 0 e Weight 484g e Operating Temperature 0 55X Package Content SY MRA55005 1Pcs SATA data cable 1Pcs Fan power amp access SATA cable 1Pcs User manual 1Pcs Screws 3x6pwn APcs Screws 2x3pm 2Pcs Installation Push 12 7mm slim optical drive into the slim drive bay After pushing the slim optical drive into position to align with the front panel use a magnetic screwdriver to secure two screws to the optical drive Place SY MRA55005 into an available 5 25 bay in the chassis and secure with screws
3. vice may damage the SY MRA55005 Removing the Hard Drive 1 Press the key of the mobile rack gently to eject the panel 2 Open the front panel to take out the 2 5 hard drive and close the panel firmly 1 Do not eject the HDD while it is busy 2 Carefully take the HDD out from SY MRA5005 The HDD can reach temperatures over 50 C It will not burn the fingers but should be handled with care Statement The contents of user s manual are protected under copyright law Any organization or individual cannot make copy and save it in the information bank or the retrieval system by any method or form without the authorization of Syba USA Syba USA is not responsible for any loss in the process of using the mobile rack
Download Pdf Manuals
Related Search