Panasonic DS-PAN-601
Contents
1. Owner s Manual Havis Docking Station For Panasonic Toughbook H2 DS PAN 600 Series DS PAN 601 DS PAN 602 DS PAN 603 HAVIS Productivity in motion www havis com 1 800 524 9900 Before Beginning Original Instructions Havis is pleased to provide this Owner s Manual to aid in the proper installation and use of the DS PAN 600 Series Docking Station for the Panasonic Toughbook H2 For questions regarding the set up of your DS PAN 600 Series Docking Station please contact Havis at 1 800 524 9900 or visit www havis com for additional product support and information This Owner s Manual applies to the following Part Numbers DS PAN 601 DS PAN 603 DS PAN 602 e NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE e DO NOT USE COMPUTER WHILE DRIVING e READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION e FOR DOCKING STATION MODELS EQUIPPED WITH AN INTEGRATED POWER SUPPLY DS PAN 602 REFER TO THE SUPPLIED LIND POWER SUPPLY REFERENCE GUIDE EC DECLARATION OF CONFORMITY in accordance with EN 45014 Manufacturers Name Havis Inc Manufacturers Address 47801 Anchor Court Plymouth Twp MI 48170 USA Declares under our sole responsibility that the product Product name Havis Docking Station For Panasonic Toughbook H2 Model DS PAN 60X where X may be any alphanumeric character and which describes product options May be followed by any alphanumeri2. c characters which describe product options Product Options This declaration covers all options of the above product which bear the CE Marking Is in conformity with the following standards or other normative documents EMC Directive 2004 108 EC EN 55022 2010 Class B Information technology equipment Radio disturbance characteristics Limits and methods of measurement EN 55024 2010 Information technology equipment Immunity characteristics Limits and methods of measurement Directive 2011 65 EU Restriction of the use of certain hazardous substances ROHS Supplementary Information The product herewith complies with the requirements of the EMC Directive 2004 108 EC This product requires the use of the provided e Marked automotive power supply when used within vehicles Plymouth twp MI USA August 1 2012 Bruce Jonik Director of Engineering Havis Inc FCC 47CFR Part 15 compliance This is an FCC Class B device Any changes or modifications to the model DS PAN 60X not expressly approved by Havis Inc could void the user s authority to operate this equipment aN HAVIS Table of Contents SPECION oreraa E ER mu aeuusoc es ateges EE 3 Parts mcduded eserin er Ene EE ELAES EEE ATE RAEE 4 Port Replication Capability ici isn outta scanaausicniemustanmaraacnsuahiaiwasssedaneabatdaa 5 US et NON e E A T E E E E 6 Cable Management onensnesnsisisusinsirsisrrsirsirrrsrrsirsrrrrsrrsrrrrerrsrn 7 Operation DOCkINE e
3. esis en r inn TEER 9 Operation Undocking icceie cio cee cet ogs cee cept eee ee ostae cw acedeesoraoenseenectcanesecs 10 Precautions e Do not place metal objects or containers of liquid on top of the Docking Station e Ifa malfunction occurs immediately unplug the Power Supply and remove the laptop e Use only the specified Power Supply Part LPS 102 with this Docking Station e Do not store the Docking Station where water moisture steam dust etc are present e Do not connect cables into ports other than what they are specified for Do not leave the Docking Station in a high temperature environment greater than 85 C 185 F for a long period of time Specifications Power Supply Input 15 6V DC In Dimensions 11 3 28 7 cm W x 4 0 10 1 cm D x 11 8 30 0 cm H Weight 4 6 Ibs 2 1 kg Operating Environment 20 C to 60 C 4 F to 140 F Storage Environment 40 C to 85 C 40 F to 185 F www havis com e 1 800 524 9900 Parts Included Docking Station Barrel Lock Latch Handle Bumpers Mounting Bracket shown assembled Docking Connector Mounting Bracket Hardware Kit aa SSSA This Hardware Kit includes 1 Zip Ties 6 EZ 7 i T 2 Keys 2 7 T 3 1 4 20 x 5 8 long Button Head Screws 4 4 1 2 20 X 3 8 Long Oe o Pan Head Screws 5 5 Int Zip Ties 2 Tools required for installation e 5 32 Hex Drive e 3 Phill
4. ips For 1 4 20 Button Head Screws For 1 2 20 Pan Head Screws aN HAVIS Port Replication Capability Strain Relief Bracket Power Input VGA Ethernet USB 2 0 Serial RJ45 x3 Installation and Cable Management 1 Remove the Mounting Bracket from the packaging Install the Mounting Bracket to the Motion Device using 3 1 4 20 x 5 8 long screws Hardware Kit Item 3 Torque screws to 80 in lbs 9 0Nm 10 NOTE Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors Typical Motion Device Example not included Mounting Bracket 1 4 20 Screws NOTE We recommend applying a drop of medium strength blue thread locking adhesive to the threads of all fasteners www havis com e 1 800 524 9900 5 Installation and Cable Management continued 2 Connect all needed peripheral cables to the Docking Station and bundle them to the Strain Relief Bracket using the provided Zip Ties Hardware Kit Item 1 Strain Relief HAVIS Installation continued 4 Lower the Docking Station to the Mounting Bracket as shown and secure with 4 1 4 20 x 3 8 long screws Hardware Kit Item 4 Fasten the top 2 Screws first A then the left side Screw second B and the right side Screw last C Torque screws to 80 in lbs 9 0 Nm 10 5 Gather all cables to one side and tie off to unused holes on back side
5. is com DS DA 311 Side Exiting USB Cable Allows for more convienent access for up to two 2 of the available USB 2 0 ports Can be mounted to the right left or both sides on DS PAN 600 Series Docking Stations LPS 102 90W Power Supply External in vehicle power supply and cable for Panasonic Toughbook H2 with cigarette lighter adaptor DS DA 218 Desktop Stand for Tablet Docking Stations Durable stand for mounting tablet Docking Stations for use in the home or office Havis Inc 75 Jacksonville Road PO Box 2099 Warminster PA 18974 47801 Anchor Court Plymouth MI 48170 www havis com 1 800 524 9900 DS PAN 600 SERIES OMN_ 8 12
6. of Docking Station www havis com e 1 800 524 9900 Installation and Cable Management continued 6 Create a service loop with cables to ensure that no tension is on the connectors and to enable intended motion Tie off cables onto a stationary part of the mounting system This loop must be large enough to allow full range of expected rotation and extension without stressing connections Collect cables and secure to the mounting system Note Mounting system not included HAVIS Operation Docking DO NOT FORCE LAPTOP ONTO DOCKING STATION IF THERE IS RESISTANCE CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION 1 Hold computer with bottom angled toward Docking Station Lower computer into the bottom of the Docking Station 2 While keeping downward pressure on the computer pivot it into Docking Station so the handle snaps into Latch Mechanism 3 For theft deterrence secure computer by locking Docking Station with supplied key Hardware Kit Item 2 www havis com e 1 800 524 9900 EE Operation Undocking 1 If previously locked unlock Docking Station using supplied key 2 While holding computer with one hand push down on Latch Mechanism with thumb 3 While Latch Mechansim is pushed down carefully rock the top of the computer forward and lift out of Docking Station Optional Accessories DS DA 311 Remote USB Extension Cable For further Installation Ins
7. tructions refer to the Instructions included with DS DA 311 1 Determine if USB will exit the left or right side of Docking Station 2 Remove the Screws from USB Cable 3 Align the female end of the USB Cable with mounting surface hole pattern Insert Screws and Lock Washers and tighten Screws CAUTION DO NOT OVERTIGHTEN SCREWS 4 Plug male end of USB Cable into USB Port 5 Strain Relief cable as needed 6 If the connected peripheral has a cable requiring strain relief use Int Zip Tie Hardware Kit Item 5 by snapping into hole just below port 7 Continue on with Step 3 of Installation and Cable Management on Page 6 LPS 102 90W Power Supply For further Installation Instructions refer to the Instructions included with LPS 102 1 Insert the Output Cable through slot on the side of Docking Station 2 Plug the yellow tip of Output Cable into Power Input on Docking Station 3 Route the Output Cable down and through the strain relief notch 4 Secure Power Supply Brick to the bottom of Docking Station with the supplied hardware 5 Plug the Output Cable into the Power Supply Brick Strain relief cable as needed 6 Continue on with Step 3 of Installation and Cable Management on Page 6 www havis com e 1 800 524 9900 Related Products Havis offers a wide variety of accessory products specifically for use with the DS PAN 600 Series Docking Station For more information or to order please visit www hav
Download Pdf Manuals
Related Search