Foxconn nT-A3550
Contents
1. nT A3000 Series Nettop User s Manual Trademark All trademarks are the property of their respective owners Version User s Manual V1 0 for nT A3000 Series Nettop P N 3A223A900 000 G Symbol description gt I JA Caution refers to important information that can help you to use NETTOP better and tells you how to avoid problems WEEE The use of this symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could other wise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased this product CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS All rights reserved All trade names are registered trademarks of respective manufacturers listed All images are for reference only please refer to the physical product for specific features Safety Notice Before using this product please read the below safety notice carefully this will help to extend the product s lifecycle and work normally When NETTOP is working please make sure its ventilation system is working The power adapter is dissipating2. as User Defaults If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save the changes done so far as user defaults select No or lt ESC gt to return to the main menu gt Restore User Default If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to restore load the user defaults to all the setup options select No or lt ESC gt to return to the main menu gt Launch EFI Shell from filesystem device This item is used to launch EFI shell application Shellx64 efi from one of the available filesystem devices 19 This chapter introduces the Windows installation Install Windows 7 Install Drivers in Windows 7 Make sure you have these ready 1 NETDVD It is an optional accessory If there is no NETDVD in this package you need other purchase an external USB DVD ROM drive 2 NETTOP driver CD In this package 3 Windows 7 Install CD Other purchase Before we continue n Your NETTOP power is off n Connect the NETDVD or USB DVD ROM drive to one USB port of NETTOP and power it on 4 1 Install Windows 7 1 Push power on button to turn on your computer then press lt Del gt key to enter BIOS Setup 2 Put the Windows 7 Install CD into the NETDVD or USB DVD ROM drive 3 Select and go to the Boot menu set the Boot Option 1 to DVD drive press lt F4 gt key to save change and exit BIO
3. like the right image 1 2 If there is enough space on your desk you can simply put your NETTOP on the tabletop as shown below T 2 On the Display Back This is the best space saving way 2 1 Use four screws to fasten the bracket onto the display back easily fasten the bracket onto your display 0000 o To install this bracket your display must follow VESA75 VESA100 standard The two groups of holes on your dispaly have different space between and they help you 2 2 Fit the NETTOP into the bracket with power button locating at the top for easy touch Lift up the NETTOP straightly to take it out 2 2 Connection of NETTOP 1 Connect the Monitor Connect a monitor to the NETTOP through DVI connector 0000 o 2 Connect the USB Devices Connect USB devices to the USB ports of the NETTOP for example mouse and keyboard 3 Connect the Network Cable Connect LAN cable to the RJ 45 port with the other end connected to a hub or switch Hub or cn 4 Connect the Power Cord Connect the power adapter to the power input port of the NETTOP and push the power but ton to start it C CA The power adapter is dissipating heat during normal use please make sure not to cov
4. responsible for any damage which resulted from the change you made Use the arrow right left keys to select a specific function and go to the submenu Each function is explained below Main It displays the basic system configuration such as CPU Name memory size system date time and so on They all can be viewed or set up through this menu Advanced The advanced system features can be set up through this menu Boot Boot features can be set up through this menu You can set the boot device priority and enable Quiet Boot feature here Security The Administrator User password can be set up through this menu to prevent unauthorized use of your computer If you set a password the system will ask you to key in correct password before boot or access to Setup Save amp Exit The optimal performance settings can be loaded through this menu However it may offer better performance in some ways such as less I O cards less memory etc still it may cause problem if you have more memory or I O cards installed It means if your system loading is heavy set to optimal default may sometimes come out an unstable system What you need now is to adjust BIOS setting one by one trial and error to find out the best setting for your current system You also can save or discard the changes and exit BIOS setup here 10 Main The BIOS Setup is accessed by pressing the lt DEL gt or lt F2 gt button after the Power On Self Test POST memo
5. S Aptio Setup Utility Copyright C 2010 American Megatrends Inc Boot Option 1 USB Optical DVD RW 21 4 The computer will reboot and it will start loading the files for installing the Windows 7 Operating System 5 After the computer reboots it will start loading the files for installing Windows 7 Click Next to continue and click Install now button to start the setup 6 When the license terms appear choose accept and click Next to continue 7 It will then ask you to select the installation type Click Custom advanced to install a new copy of Windows Which type of installation do you want Upgrade Upgrade to a newer version of Windows and keep your files settings and programs She The option to upgrade is only available when an existing version of Windows is running We recommend backing up your files before you proceed Custom advanced Install a new copy of Windows This option does not keep your files settings and programs The option to make changes to disks and partitions is available when you start your computer using the installation disc We recommend backing up your files before you proceed Help me decide 8 The setup will the display the hard disk partitions 160GB in this example of your system If there were other systems such as Linux installed previously you need select them and click Drive options advanced to delete them When all
6. cation describes the reg ister level interface for a Host Controller for Serial ATA The specification includes a description of the hardware software interface between system software and the host controller hardware AHCI provides more advanced features including SATA features but some SATA drives may not support AHCI unless they are labeled with AHCI support in its specification If your motherboard supporting AHCI and you have a SATA device which also supports AHCI then you can select IDE option to have fair performance only PATA SATA level or you can select AHCI to get its best performance gt Deep Sleep Support This item is used to enable or disable Deep Sleep Support function When entering deep sleep mode system S4 S5 only can wake up from power button gt USB 2 0 Port S3 Wakeup This item is used to enable or disable USB 2 0 Port S3 Wakeup Function gt LAN USB 3 0 Port S3 Wakeup This item is used to enable or disable Onboard LAN USB 3 0 Port S4 Wakeup Function gt Launch LAN PXE OpROM This item is used to enable or disable Boot Option ROM for legacy network devices gt Restore on AC Power Loss This item is used to set which state the PC will take with when it resumes after an AC power loss 13 gt Supporting C6 power Loss This item is used to enable or disable C6 power state which is featured in Fusion processors gt Integrated GPU UMA Frame Buffer This item is used to set Integrate Graphics UMA Frame Buf
7. eci Caution Before using it you need to install the AS Media USB3 0 driver in the Driver CD Enter suspend mode in operating system Ir Integrated LED Indicator 1 3 Back Side View 0 O CEE 0 eo Q boa eee Network Port Standard RJ 45 network port 5 Line Out and S PDIF Out Port Connects to powered analog speakers or record ing devices with optical connectors 3 5mm jack 6e Power Input Port Connects to the power adapter 1 4 Bottom View a 4 9 Oo Sheet Metal NETDVD optional accessary or Magnet Metal Feet can mag netize them to seat firmly There are four Magnet Metal Feet in the package Just align them to the sheet metal on the bottom then they can magnetize the NETTOP easily The feet can seat and protect NETTOP when it is placed on the tabletop In this chapter the placement and the connection of some neces I 1 I I sary peripherals will be introduced I I i l This chapter includes the following information I a Placement of NETTOP I a Connection of NETTOP I A A x a s s 4 S Sa S x s Sa s s s ba x x gt s So fa x gt n Sa ae x Se kg aS x Pa x aa un sa a 2 1 Placement of NETTOP 1 On the Desk 1 1 You can install your NETTOP in the mount
8. er it and keep it away from your body to prevent discomfort or injury from heat exposure i I This chapter tells how to change system settings through the I BIOS Setup menus Detailed descriptions of the BIOS parameters I are also provided x You have to run the Setup Program when the following cases I 1 occur I y 1 An error message appears on the screen during the system i Power On Self Test POST process I 2 You want to change the default CMOS settings i A i This chapter includes the following information x m Enter BIOS Setup m Main n Advanced n Boot ind qu Security n Save amp Exits a x Since BIOS could be updated some other times the BIOS information described in this manual is for reference only We do not guarantee the content of this manual will remain consistent with the newly released BIOS at any given time in the future Please visit our website for updated manual if it is available Enter BIOS Setup The BIOS is the communication bridge between hardware and software correctly setting up the BIOS parameters is critical to maintain optimal system performance Power on the computer when the message Press lt DEL gt or lt F2 gt to enter setup Press lt F9 gt to enter boot menu appears at the bottom of the screen you can press lt DEL gt or lt F2 gt key to enter Setup We do not suggest that you change the default values in the BIOS Setup and we shall not be
9. esired operation Warning FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protec tion against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruc tions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution Any changes or modifications not expressly approved by the grantee of this device could void the user s authority to operate the equipment RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna s used for this transmitter m
10. fer Size 14 Boot Aptio Setup Utility Copyright C 2010 American Megatrends Inc Bootup Numlock State gt Bootup Numlock State This item is used to select the keyboard numlock state The defaulte setting is On gt Quiet Boot This item is used to enable disable the quiet boot Disabled Displays the normal POST messages Enabled Displays OEM customer logo instead of POST messages gt Fast Boot This item is used to enable or disable boot with initialization of a minimal set of devices required to launch active boot option This is no effect for BBS boot options If you connect external devices the following item will appear gt 1st 2nd 3rd 4th 5th 6th 7th 8th Boot Option These items are used to set the system boot order gt Hard Disk Drive BBS Priorities USB Floppy Drive BBS Priorities Press lt Enter gt to go to its submenu 15 Hard Disk Drive BBS Priorities Aptio Setup Utility Copyright C 2010 American Megatrends Inc 1st Boot SATA WDC Wad1600BE gt 1st Boot This item shows the priority for the boot device USB Floppy Drive BBS Priorities Aptio Setup Utility Copyright C 2010 American Megatrends I 1st Boot Generic Multi Card gt 1st Boot This item shows the priority for the boot device 16 Security t C 2010 Am Administrator Password gt Administrator Password This item is used to install or change administrator password After you input adm
11. heat during normal use please be sure not to cover it and keep it away from your body to prevent discomfort or injury by heat exposure Please use the power adapter that comes with the product s package wrong power adapter may damage your device Make sure all the peripherals are properly connected before using NET TOP This product should only be used in an environment with ambient tem peratures between 0 C and 40 C To reduce the risk of fire use only No 26 AWG or larger UL listed or CSA certified telecommunication line cord Always shut down the computer before installing or uninstalling the pe ripheral which does not support hot plug Disconnect all peripherals before servicing or disassembling this equip ment Please do not disassemble this product by yourself any disassembly not approved by the original manufacturer may result in malfunction and void warranty Risk of explosion if battery is replaced by an incorrect type please dis pose of used batteries according to the instructions Chapter 1 Introducing the NETTOP UTO e IR RE Front Side VieW ii Back Side View i Bottom VieW inania a aiii Chapter 2 Placing and connecting the NETTOP Placement of NETTOP On the Desk ille ai ih On the Display Back iaia Connection of NETTOP Connect the Monitor nenene Connect the USB Devices nee tnreren nern ne ene Con
12. inistrator password it then will ask you to confirm the password gt User Password This item is used to install or change user password 17 Save amp Exit Aptio Setup Utility Copyright C 2010 American Megatrends Inc Main Advanced Boot Security Exit system setup after saving Discard Changes and Exit the changes Save Changes and Reset Discard Changes and Reset Save Options Save Changes Discard Changes Restore Defaults Save as User Defaults Restore User Defaults Launch EFI Shell from filesystem device gt lt Select Screen T Select Item Enter Select Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit Version 2 1 pyright C 2010 American Megatrends Inc gt Save Changes and Exit If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save your changes and exit select No or lt ESC gt to return to the main menu gt Discard Changes and Exit If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to exit setup utility without saving your modifications select No or lt ESC gt to return to the main menu gt Save Changes and Reset If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save your changes and reset computer select No or lt ESC gt to return to
13. nect the Network Cable nee nn neren rennene Connect the Power Cord nenene Chapter 3 BIOS Setup SO CUPILY A A ET AE CENA ARRE E a ieaie ER TTT TOTTI Chapter 4 Install Windows 7 in NETTOP Install WINdOWS 7 i Install Drivers in WINdOWS 7 Accessory List Thanks for choosing our products Please check the accessories listed below If there is anything broken or lost please contact with your distributors as soon as possible Opening Tool Mini PCle Half Card Support Screw for VESA Mounting Screw for HDD Support Bracket Screw for Half MiniPCI Card M8 OX9 7mm 4X M 4 7X2 85mm 4X M 4 4X2 85mm 1X Screw for Half MiniPCI Half Card Support Bracket M 4 4X4 85mm 1X This chapter introduces NETTOP s outlook Top View Front Side View Back Side View Bottom View 1 1 Top View J 190mm 7 S N O O 6 wwgE 1 Kensington Lock Attach a Kensington security system or a compatible lock to secure your Nettop 1 2 Front Side View Sy Msome st ee i c ess wwpzH Name Description Headphone Port Connects to a headphone Microphone In and S PDIF In Connects to a microphone or playback devices with Port optical connectors 3 5mm jack Multi Function Card Reader Support SD SDHC MS MS Pro MMC memory cards 4 USB 3 0 Ports Connect to USB devices
14. partitions are clean setup will display the biggest size of your hard drive Where do you want to install Windows Total Size Free Space Type a Disk 0 Unallocated Space 160 0 GB 160 0 GB 4 Refresh Load Driver 22 9 In the hard disk size screen you can click the new button to create partitions as you need In this example we are creating a 70GB partition to install Windows Make your modifications and click Apply Where do you want to install Windows Total Size FreeSpace Type ge DISKO Unallocated Space 160 0 GB 160 0 GB 4 Refresh Pr Delete SPe ormat ae New Load Driver Eh tend S m00 H Me To ensure that all Windows features work correctly Windows might create additional partitions for system files So you will see a 100MB partition reserved by system after you create a partition Select the 70GB partition and click Next to continue Where do you want to install Windows Disk 0 Partition 1 System Reserved 100 0 MB 86 0MB System Disko Partition 683GB 683GB Primary gg Disk0 Unallocated Space 916 GB 91 6 GB 4 Refresh K Delete F Format Load Driver E Extend 23 10 The setup program will then start to install Windows 7 on your hard disk During the installa tion your computer will restart several times Installing Windows That s all the information we need right now Your computer will re
15. ry test begins and before the operating system boot begins Once you enter the BIOS Setup Utility the Main Menu will appear on the screen The Main Menu provides System Overview information and allows you to set the System Time and Date Use the and cur sor keys to navigate between menu screens System Date Thu 07 22 2011 BIOS Information gt BIOS Vendor This item shows the BIOS vendor information gt BIOS Build Date This item shows the BIOS building date and time gt Embedded Control Version This item shows the Embedded Control Version gt System BIOS Version It displays the current BIOS version User can check this information and discuss with the field service people if a BIOS upgrade is needed CPU Information gt AMD E 350 Processor This item shows the current CPU name The CPU name are for reference only please refer to the physical nettop for specific features gt Processor Speed This item shows the processor speed value gt Microcode Revision This item shows the microcode revision number 11 Memory Information gt Total Memory This item displays the total memory size The size is depending on how many memory mod ules are installed in your system before powering on gt System Date lt weekday gt lt month gt lt date gt lt year gt format Day weekday from Sun to Sat this message is automatically displayed by BIOS Read Only Month month from 1 to 12 Date date from 1
16. start several times during installation of Copying Windows files Windows files 1 Installing features Installing updates Completing installation 11 When the installation is complete setup will prepare your computer for it s first use You can then follow the steps to select system settings create an account set a password etc until the whole process is complete 24 4 2 Install Drivers in Windows 7 1 When the Windows 7 is completely installed you have to install the necessary drivers before using the NETTOP Take out the Windows 7 Install CD from the USB DVD ROM drive and put the NETTOP driver CD inside 2 Waiting for a few seconds the main menu will be displayed on the screen a CO ione CC fia gl LI Realtek Gard Reader Driver Intel WiFi Driver 3 Use these options to install all the drivers for your system You must click AMD Chipset Driver to install it first After that you can click One Click Setup and then choose the items you want to install or you can click on each individual driver to install it manually 4 After all the drivers are installed you need to restart your NETTOP then you can start using it 25 Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause und
17. the main menu gt Discard Changes and Reset If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to exit setup utility and reset computer without saving your modifications select No or lt ESC gt to return to the main menu Save Options gt Save Changes If you select this option and press lt Enter gt a message will be displayed in the center of the screen Select Yes to save your changes select No or lt ESC gt to return to the main menu gt Discard Changes If you select this option and press lt Enter gt a message will be displayed in the center of the screen Select Yes to discard your modifications select No or lt ESC gt to return to the main menu gt Restore Defaults Optimal defaults are the best settings of this motherboard Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values 18 Select this option and press Enter it will pop out a dialogue box to let you load the defaults Select lt Yes gt and then press lt Enter gt to load the defaults Select lt No gt and press lt Enter gt it will not load By this default BIOS have set the optimal performance parameters of system to improve the performances of system components But if the optimal performance parameters to be set cannot be supported by your hardware devices for example too many expansion cards were installed the system might fail to work gt Save
18. to 31 Year year set up by users Use ENTER TAB to select a field Use or to input the value gt System Time This item allows you to configure the desired time Use ENTER TAB to select a field Use or to input the value The three fields of the setting are lt hour gt lt minute gt lt second gt respectively gt Access Level It displays your current access level If you enter system with a user password it will dispaly User If no password is set or you enter system with administrator password this item will dispaly Administrator 12 Advanced io Setup Utility Copyright C 2010 American Megatrends Inc WEI Advanced RESISTE Select the SATA Mode Deep Sleep Support Enabled s USB 2 0 Port S3 Wakeup Enabled Omon LAN USB 3 0 Port S3 Wakeup Enabled UIDE Mode Launch LAN PXE OpROM Disabled Gaee Restore on AC Power Loss Last State Supporting C6 power Loss Disabled Integrated GPU UMA Frame Buffer Auto e Select Screen TY Select Item Enter Select Change Opt F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Exit apyright C 2010 American Megatrends Inc gt SATA Mode This item is used to set the operating mode of your SATA ports Setting options IDE Mode AHCI Mode IDE Mode This configures the SATA ports to support IDE mode AHCI Mode The Advanced Host Controller Interface AHCI specifi
19. ust be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter End users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance Warning statement for Europe Also put in the manual which directive to fulfil and also which countries to sell the product Example of a text to tell which directive has been fulfilled Hereby Foxconn declares that this nT A3000 series is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC
Download Pdf Manuals
Related Search