Philips docking speaker DS1150
Contents
1. the apparatus has been exposed to rain or moisture does not operate normally or has been dropped e Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable WN Warning e Never remove the casing of this apparatus e Never lubricate any part of this apparatus e Never place this apparatus on other electrical equipment e Keep this apparatus away from direct sunlight naked flames or heat e Make sure that you always have easy access to the power cord plug or adaptor to disconnect the apparatus from the power Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries The correct disposal of these products helps prevent potentially negative consequences on the environment and human health Please visit www re2. speaker Charge the iPod iPhone When the docking speaker is connected to wall power outlet the docked iPod iPhone begins to charge Your can also connect your iPod iPhone to the USB socket in the docking speaker to charge Adjust volume level During play press VOL to increase or decrease the volume level t The volume level shows in the display Adjust brightness e Press CLOCK repeatedly to select different levels of display brightness e Press X repeatedly to select different levels of bottom light brightness 5 Product information Note e Product information is subject to change without prior notice Specifications Amplifier Rated Output Power 2X2VV RMS Signal to Noise Ratio 77 dB General information OH 1018A0592400U Philips Input 100 240V 50 60Hz 650mA Output 5 9V 2 4A AC power power adaptor Operation Power Consumption 18W Dimensions Main Unit W x H x D 176 4 x 176 4 x77 3mm Weight Main Unit 0 88 kg EN 7 6 Troubleshooting Warning e Never remove the casing of this apparatus To keep the warranty valid never try to repair the system yourself If you encounter problems when using this apparatus check the following points before requesting service If the problem remains unsolved go to the Philips web site www philips com welcome VVhen you contact Philips ensure that t
3. Register your product and get support at www philips com welcome DS1150 98 User Manual PHILIPS Contents 1 Important 2 Safety 2 Notice 2 2 Your Docking Speaker 4 Introduction 4 What s in the box 4 Overview of the main unit 4 3 Get started 5 Connect power 5 Turn on 5 4 Play 6 Play from iPod iPhone 6 Adjust volume level 7 Adjust brightness 7 5 Product information 8 Specifications 8 6 Troubleshooting 9 EN 1 Important Safety Important Safety Instructions e Heed all warnings e Follow all instructions e Do not use this apparatus near water e Clean only with dry cloth Do not block any ventilation openings nstall in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus e Only use attachments accessories specified by the manufacturer e Unplug this apparatus during lightning storms or when unused for long periods of time e Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus
4. When you unplug the AC adaptor always pull the plug from the socket Never pull the cord Before connecting the AC adaptor Make sure that you have completed all other connections Connect the AC power adaptor to e the power supply socket on the back of the docking speaker e the wall power outlet Turn on In standby mode the docking speaker turns on automatically when it detects an audio signal from docked iPod iPhone Switch to standby mode The unit switches to standby mode if there is no audio signal from docked iPod iPhone over 15 minutes EN 5 4 Play Play from iPod iPhone You can enjoy audio from iPod iPhone through this docking speaker Compatible iPod iPhone The docking speaker supports the following iPod iPhone models Made for e iPhone 4S e iPhone 4 e iPhone 3GS e iPhone 3G e iPhone e iPod classic e iPod nano 1st 2nd 3rd 4th 5th and 6th generation e iPod touch 1st 2nd 3rd and 4th generation e iPod mini Load the iPod iPhone e Insert your iPod iPhone into the dock L gt The docking speaker synchronizes the time from the docked iPod iPhone Zomm mE To remove the iPod iPhone e Pull your iPod iPhone out of the dock Listen to the iPod iPhone Note e Make sure that the iPod iPhone is loaded correctly Start music play in your iPod iPhone Ly You can hear music from this docking
5. cycle philips com for additional information on a recycling center in your area Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment The making of unauthorized copies of copy protected material including computer programs files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes Made for iPod iPhone Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for he operation of this device or its compliance with safety and regulatory standards Please the use of this accessory with iPod or i may affect wireless performance note that Phone iPod and iPhone are trademarks of Apple Inc registered in the US and other countries Note e The type plate is located on the bottom of
6. he apparatus is nearby and the model number and serial number are available No power e Make sure that the AC power plug of the unit is connected properly e Make sure that there is power at the AC outlet No sound e Adjust the volume No response from the unit Disconnect and reconnect the AC power plug then turn on the docking speaker again 8 EN Specifications are subject to change without notice 2011 Koninklijke Philips Electronics N V All rights reserved DS1150_98_UM_V1 2 PHILIPS
7. the apparatus EN 3 2 Your Docking Speaker Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With this docking speaker you can enjoy audio from the iPod iPhone and other audio devices What s in the box Check and identify the contents of your package e Main unit e 1x AC adaptor e Quick start guide Overview of the main unit EES 4 00 iPod iPhone dock 89 Je e Adjust the brightness of bottom light P e Adjust volume Display Charge your iPod iPhone through USB cable Power supply socket connect AC power CLOCK e Adjust the brightness of Display 0 OUO 0O Bottom light 3 Get started ea Caution e Use of controls adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Aways follow the instructions in this chapter in sequence f you contact Philips you will be asked for the model and serial number of this apparatus The model number and serial number are on the bottom of the apparatus Write the numbers here odel No Serial No Connect power pE Caution e Risk of product damage Make sure that the power supply voltage corresponds to the voltage printed on the back of the unit e Risk of electric shock
Download Pdf Manuals
Related Search