Strong PrimaSat II
Contents
1. Press OK Exit and confirm Your selection will be memorized for the current channel NOTE Audio tracks containing AC3 can only be listened to if the receiver is connected to a digital audio amplifier and this amplifier is switched ON and set to the correct input 8 0 TELETEXT Press TEXT in normal viewing mode and lt P to increase or decrease the displayed page number Use 1 9 buttons to input a page directly 9 0 SUBTITLES Press SUB in normal viewing mode If the current channel broadcasts subtitle information the Subtitle Language selection menu will appear Use AW lt P to select what you want press OK Exit and confirm www strong tv 13 STRONG PART 1 e English DIGITAL TV 10 0 TROUBLE SHOOTING There may be various reasons for occurring abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not wor properly after checking it please contact the dealer Don t open the receiver cover This may cause a dangerous situation and will void warranty Cause Remedy Solution The display on front panel does not light up No picture or sound The power cord is not plugged in Receiver is in stand by mode Your model is without display Wrong connection of the Audio Video output of the receiver to TV Check that the power cord is plugged into the wall outlet Switch ON receiver Your model is without display Connect the Audio vi2. With the GREEN button you can select the whole list to delete 5 1 1 8 Search Press 4 gt to select B then press OK and use the On Screen Display menu to search for a programme 5 1 2 EPG Electronic Programme Guide The EPG shows the programme schedule for all services broadcasting EPG information NOTE Not all broadcasters provide programme information Press AW to select the desired channel and the right screen will show you the available EPG Press to step in to the EPG schedule for the current channel and use AW for EPG and lt P to change Date Use OK for more details on the selected EPG Press EXIT to leave 5 1 3 Programming Timer from EPG Book the selected programme in EPG screen with the RED button A Timer Settings menu will pop up and you can edit this menu with A W lt P and the numeric buttons to set the timer details Press OK to save The receiver will switch on to the right programme at the right time 5 2 Radio Press MENU to move to Main Menu then press lt P to move to Radio and press OK to enter the Radio Channels menu 5 2 1 Radio Channels Press A W or OK to move to Radio Channels Use lt P to move to the following sub menus Fav Lock Edit Move Sort Skip Delete and Search Press EXIT to leave NOTE For each function refer to chapters 5 1 1 1 to 5 1 1 8 as the functions are identical 5 2 2 Radio EPG NOTE The functions in the Radio EPG are identical to the TV EPG please read the chapter 5
3. 1 2 for your reference 5 3 Accessory In Main Menu press lt P to move to Accessory and press OK to enter the menu Press A W to select the following sub menus Gomoku Calendar and Calculator www strong tv 9 lt S7RONG PART 1 English DIGITAL TV 5 3 1 Gomoku Press AW to select Gomoku and press OK Play the game Gomoku on your receiver Use the on screen help tips to set and play the game 5 3 2 Calendar Press AW to select Calendar and press OK Use the on screen help tips to search in your Calendar 5 3 3 Calculator Press AW to select Calculator and press OK Use the on screen help tips to use your Calculator 5 4 Configuration In Main Menu press lt P to move to Configuration and press OK to enter the menu Use AW to move to the following sub menus Installation TV Setup PIN Code Set Timer Set Default and SW Update 5 4 1 Installation Press AY to select Installation and press OK This menu includes the following submenus OSD settings My Dish and TP Manager 5 4 1 1 OSD settings NOTE For each function refer to chapter 4 1 as the functions are identical 5 4 1 2 My Dish NOTE For each function refer to chapter 4 2 1 as the functions are identical 5 4 1 3 TP Manager Press AW to select a transponder you would like to Delete or to Scan To make a new transponder in your list you can use Add You can use Delete All to delete all channels from the list RED Add GREEN Del YELLOW Delete All BLUE
4. 45 Ms s SCPC amp MCPC signals from C amp KU band satellites Video Decoder Profile level MPEG 2 MP ML Input Rate Max 60 Mbits s Video Resolution 720 x 576 pixels PAL 720 x 480 pixels NTSC Aspect Ratio 4 3 16 9 Audio Decoder ISO IEC 11172 LAYER 1 amp 2 Sampling rate 32 44 1 48 kHz Audio modes Stereo Dual mono Mono Tuner Front End DVB S Input Frequency Range 950 2150 MHz RF Input Level 25 65 dBm LNB Power 13 18 V DC 5 max 500 mA Overload protected DiSEqC Version 1 0 1 1 amp 1 2 GOTO X System and Memory Flash Memory 16 Mbits SDRAM 64 Mbits Connectors SAT IN SCART TV RGB CVBS S PDIF coaxial output USB port www strong tv 15 lt S gt 7RONG PART 1 e English DIGITAL TV General Data Input Voltage Range Power consumption Stand bv Power consumption Operating Temperature Storage Temperature Operating Humiditv Range Size WxDxH Weight 100 240 V AC 50 60 Hz max 18 W typ 4 6 W 0 50 W 0 40 C 30 80 C 10 85 RH Non condensing 180 x 130 x 45 mm ca 0 457 kg 16 www strong tv
5. Auto Time Zone and Time Zone 4 1 1 OSD Language Use this option to change the language of the OSD Use lt P to select OSD language 4 1 2 Audio Language Use this option to change the language of the Audio Use lt P to select Audio language 4 1 3 Subtitle Language Use this option to change the language of Subtitles Use lt P to select Subtitle language www strong tv lt S7RONG PART 1 e English DIGITAL TV 4 1 4 Auto Standbv This option allows you to enable Auto Standby or to disable Auto Standby Auto Standby will switch the receiver to standby automatically when it doesn t receive commands from the remote control for a period of 3 hours To avoid the automatic switch off use lt P to set Auto Standby to OFF 4 1 5 Auto Time Zone This option allows you to enable Auto Time Zone or to disable Auto Time Zone If switched ON it will follow the time zone automatically where you are Use lt P to set Auto Time Zone to OFF ON 4 1 6 Time Zone Use this option to set the time zone manual Only possible if Auto Time Zone is OFF You can make a selection from 12 00 till 12 00 Steps of 30 minutes 4 2 My Dish Press OK AW and lt P to change settings for Switch Type Toneburst and DiSEqC 4 2 1 Switch Type Use lt P to select the the Switch Type of your dish You can select DiSEqC 1 0 1 1 DiSEqC 1 2 USALS or NONE 4 2 1 1 DiSEqC 1 0 1 1 For DiSEqC 1 0 1 1 you can select the satellite you want to use for LN
6. Scan See bottom line 5 4 2 TV Setup Press AW to select TV Setup and press OK Use AW to move to the following sub menus TV Format TV System OSD Transparency Banner Display Time and Video Output 5 4 2 1 TV Format Press lt P to change settings for TV Format 4 3 LB 4 3 PS 16 9 PB 16 9 AUTO 5 4 2 2 TV System Press lt P to change settings for TV System PAL NTSC AUTO 10 www strong tv PART 1 s English STRONG DIGITAL TV 5 4 2 3 OSD Transparency Press lt P to change settings for OSD Transparency 1 8 5 4 2 4 Banner Display Time Press lt P to change settings for Banner Display Time 1sec 3sec 5sec 10sec 30sec Always 5 4 2 5 Video Output Press lt P to change settings for Video Output RGB or CVBS RGB will give you the best performance 5 4 3 PIN Code Press AW to select PIN Code and press OK Use AW to move to the following sub menus Menu Lock Channel Lock Parental Control and Change PIN 5 4 3 1 Menu Lock Press lt P to change settings for Menu Lock Yes or No This option will ask you for a pin code if you like to enter the menu Default pin code 0000 Note With active menu lock some functions in the channel editing are not available 5 4 3 2 Channel Lock Press lt P to change settings for Channel Lock Yes or No This option will ask you for a pin code if you try to enter a locked Channel Default pin code 0000 5 4 3 3 Parental Control Press lt P to change settings f
7. after strictly following the instructions in this user manual it is recommended to consult your dealer 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children For transporting the receiver from one place to another or if you are returning it under warranty conditions make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 2 www strong tv PART 1 s English STRONG DIGITAL TV 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow the instructions below m Refer to the user manual of your TV and your antenna m Make sure that the SCART cable and outdoor components are in a good condition and the SCART connection is well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow WARNING Indicates warning information Tips Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold Character Move to Represents a menu item within a window Italic Character 1 4 Accessories 1 Users Manual 1x 2 Remote control unit 1x
8. batteries inside the compartment The diagram inside the battery compartment shows the correct way to install the batteries l 2 3 Open the cover Install batteries Close the cover www strong tv PART 1 s English STRONG DIGITAL TV 2 6 Using the Remote Control To use the remote control point it towards the front of the digital receiver The remote control has a range of up to 7 metres from the receiver at an angle of up to 60 degrees The remote control will not operate if its path is blocked NOTE Sunlight or very bright light will decrease the sensitivity of the remote control 3 0 CONNECTIONS 3 1 Basic connection with SCART cable 3 2 Connecting to Satellite Dish Connecting a fixed satellite dish to your receiver Connecting multiple fixed dishes to your receiver using a DiSEqC 1 0 switch 3 3 Connecting to a Digital Audio Amplifier Connect your Digital Audio Amplifier with the S PDIF connector on the back of the receiver 3 4 Connecting to USB device 4 0 FIRST TIME INSTALLATION Ensure your satellite signal is of good quality It is recommended that you perform the first time installation by following the Installation as described step by step It will help you to easily achieve system configuration and installation setup 4 1 OSD Settings Fig 4 Fig 6 Fig 7 Fig 8 Fig 7 Fig 9 Press OK AW and lt P to change settings for OSD Language Audio Language Subtitle Language AUTO Standby
9. 3 Batteries AAA type 2 x The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries If rechargeable accumulators instead of batteries are going to be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 1 5 Usage of external USB devices m t is recommended to use USB 2 0 storage devices m STRONG cannot guarantee compatibility to all types of USB storage devices m It is advised not to store important information on USB storage devices used with the receiver Always make backups of data on USB storage device before usage with receiver STRONG will not take responsibility for any loss of information or circumstances caused by loss of information 2 0 YOUR RECEIVER 2 1 Front Panel Fig 1 1 INDICATION LED Green LED during operation red LED in standby mode 2 REMOTE SENSOR Reception of remote control signals 3 USB CONNECTION Connection to USB storage device 2 2 Rear Panel Fig 2 1 SATIN To connect to the LNB for satellite signal from dish www strong tv 3 STRONG PART 1 e English 2 3 4 DIGITAL TV TV SCART S PDIF COAX Power Cord 2 3 Remote Control Unit j WOON DUAWDN e N m W 14 15 16 17 18 2 4 Default PIN code 0000 2 5 Installing the Batteries O 0 9 FAV RECALL AUDIO SUBTITLE INFO MENU EPG EXIT AV OK
10. B 1 2 3 and 4 Press AW for the LNB you want to use and press OK to edit Press the red button to add a satellite from the list Default LNB1 is set to Astra 19 2E You can press OK on for example LNB1 Astra 19 2E to see the signal level for Strength and Quality Now you can turn your dish to get the highest Strength and Quality level If you have aligned your dish to maximum signal press EXIT Use the colour buttons mentioned on the bottom screen RED Scan All GREEN Delete YELLOW Delete All BLUE Scan After a scan the list starts with a pre installed list followed with new found channels NOTE If your pre installed list Astra 19 2E is NOT giving any signal you are probably on the wrong satellite Press INFO button 3 x in viewing mode and try to get a high as possible signal for Strength and Quality 4 2 1 2 DiSEqC 1 2 USALS DiSEqC 1 2 USALS need to be selected if your dish is mounted on DiSEqC 1 2 motor a First you need to set the LNB type you are using YELLOW button b Then you have to select your Location GREEN button c To set your Limit positions the RED button will bring you in a new Set Limit menu Move continue or in steps to your end position East end West 6 www strong tv PART 1 s English STRONG DIGITAL TV Select the RED button to Set West Limit position you have reached Select the GREEN button to Set East Limit position you have reached d Satellite positions Press A W to se
11. P to select Then press A W to select the desired channel and press OK to lock this channel Press YELLOW button to save NOTE This only works if Channel Lock is switched ON in the Pin Code menu from the Configuration menuDefault Pin Code is 0000 5 1 1 3 Edit Press lt P to select then press A W to select the desired channel and OK to edit this channel Press YELLOW button to save 5 1 1 4 Move Press lt P to select TY then press AW to select the desired channel and OK to move this channel Use AY to move the channel to its new location and press OK to confirm Repeat this for every channel you want to move Press YELLOW button to save all your changes 5 1 1 5 Sort Press lt P to select 4 You can sort channels by Name A Z Name Z A with the RED button or Pav Free or Free Pay with the GREEN button Press MENU or EXIT to return the menu The list is now sorted by the specified order NOTE Please take care once desired order is executed this order stays 5 1 1 6 Skip Press lt P to select then press A W to select the desired channel and OK to skip this channel During zapping in viewing mode it will pass the skipped channel Press YELLOW button to save 8 www strong tv PART 1 s English S gt 7RONG DIGITAL TV 5 1 1 7 Delete Press lt P to select then press A W to select the desired channel and OK to delete this channel Press the YELLOW button to save and confirm or exit the pop up screen
12. PIN code will change back to the factory setting 0000 5 4 6 SW Update Press AW to select SW Update and press OK Use AY to move to the following sub menus Update by OTA Update by USB Backup to USB 5 4 6 1 Update by OTA This function will search for new software on satellite An Update by OTA menu will pop up and you can edit this menu with A W WW and the numeric buttons to change the details Press OK to scan directly For OTA you can set Enabled and Disabled Default It will scan at this default setting for new software Change OTA to Disabled if you don t want to use this function Note Needed parameters can be changed Please ask your local STRONG dealer in case software update was not successful Warning During the Update process NEVER disconnect the receiver from the main or disconnect the receiver from the antenna cable This can damage your receiver and warranty will be void After the update the receiver restarts automatically 5 4 6 2 Update by USB a Download the required update file for your receiver model from our website www strong tv b Unzip the file copy it to your USB device and connect it to the USB port of your receiver c Use AW to move to Update by USB and press OK USB device should be connected An Update Files list will pop up and you can use AW lt P to highlight the software you want to load Press OK and confirm the new request System Update and press OK for Yes or EXIT for e
13. T TIME INSTALLATION 4 1 OSD Settings 4 2 My Dish 5 0 MAIN MENU 2 TV 5 2 Radio 5 3 Accessorv 5 4 Configuration STRONG DIGITAL TV ME OD DUN UAUA 6 6os6oooOhO DN 6 0 CHANGING CHANNEL LIST MODE 13 7 0 AUDIO LANGUAGE SELECTION 13 8 0 TELETEXT 13 9 0 SUBTITLES 13 10 0 TROUBLE SHOOTING 14 11 0 SPECIFICATIONS 15 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004 108 EC and 73 23EC RoHS 2002 95 EC Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change All product names are trademarks or registered trademarks of their respective owners STRONG 2011 All rights reserved 1 www strong tv lt S7RONG PART 1 o English DIGITAL TV 1 0 INTRODUCTION 1 1 Safetv Instructions DO NOT INSTALL VOUR RECEIVER In a closed or poorly ventilated cabinet directly on top of or under any other equipment on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or near anv other equipment that generates heat to rain or intense moisture to intense vibration and to anv shock which mav cause permanent damage to vour receiver or to any magnetic objects such as loudspeakers transformers etc Do not use a damaged power cord It may cause a fire or an electrical shock Do not touch a power cord wit
14. deo output of the receiver to TV correctly Audio muting Wrong Audio channel Press the Mute button Press AUDIO button and select other audio channel TV power off wrong channel or input Turn on TV select correct channel or input No picture The receiver can t receive the signal Check the antenna cable replace the cable or connect the cable to the receiver tightly Incorrect values of some tuner parameters Set the values of the tuner parameters correctly in the installation menu Wrong direction of the dish Check the signal strength with a spectrum analyzer and adjust your dish correctly The remote control does not work The USB storage device is not recognized The batteries of the remote control are not inserted or exhausted Wrong formatted Check whether the batteries are inserted correctly in your remote control Check the batteries and if exhausted replace the batteries in the remote control Make sure that your USB device use file system FAT32 The external USB HDD does not start Power consumption is too high Connect extra power supply adaptor to your USB HDD The receiver switches off automatically Auto Standby function enabled Disable Auto Standby See section 4 1 4 for details 14 www strong tv PART 1 s English STRONG DIGITAL TV 11 0 SPECIFICATIONS Demodulator Modulation QPSK Input Symbol Rate 2
15. ghest Strength and Quality level If you have aligned your dish to maximum signal press OK to save Press the BLUE button to scan the position you have set For Astra 19 2E after a scan the list starts with a pre installed list followed with new found channels NOTE If your pre installed list Astra 19 2E is NOT giving any signal you are probably on the wrong satellite Press INFO button 3 x in viewing mode and try to get a high as possible signal for Strength and Quality 5 0 MAIN MENU All important settings and features of your receiver can be operated in Main Menu It consists of the sub menus TV Radio Accessory and Configuration To open the Main Menu press MENU www strong tv 7 lt S7RONG PART 1 e English DIGITAL TV 5 1 TV Press lt P to move to Main Menu In Main Menu press lt P to move to TV and press OK to enter the TV menu 5 1 1 TV Channels Use lt P to reach the following sub menus Fav Lock Edit Move Sort Skip Delete and Search With the BLUE button you can change the available group you would like to use All Satellite Satellite 1 Satellite2 Fav1 Fav2 etc 5 1 1 1 Favourites Press lt P to select W if you wish to make favourite lists Press A W to select the desired channel and press 1 8 to add the selected channel to that favourite group you like to save Repeat this operation to remove the channel from the favourite list Press YELLOW button to save 5 1 1 2 Lock Press lt
16. h wet hands It may cause an electric shock m When the receiver is not used for a long period of time you should unplug the power cord from the wall socket m Do not use alcohol or ammonia based liquids to clean the receiver If you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution only after disconnecting from the mains voltage supply Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside Safety Precautions m Never open the receiver cover It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards and your warranty will be void Refer all maintenance or servicing to suitably qualified personnel m When you are connecting cables be sure that the receiver is disconnected from the mains supply voltage Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment m It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver m f the receiver does not operate normally even
17. ia W TRONG Digital Satellite Receiver PrimaSat II DIGITAL TV STRONG User manual 4000 Channels www strong tv Fig 1 Fig 2 STRONG CAUTION Model jk Satellite Receiver PrimaSat II se V z SATIN l Cex Dc 1318 v 500 mA Max Supplied by STRONG amp Co Japan Fig 3 14 15 16 18 STANDBY MUTE F i g 4 MENU EPG EXIT 8 l z l CT 13 ii ee coe 12 i g O Jl pause tvano 6 DO 17 STRONG Dicma a Fig 6 Fixed satellite Dish SCART cable Fig 7 Fixed satellite Dish f Fixed satellite dish 1 Fig 8 ex pointed at ASTRA Fixed satellite dish 2 ex pointed at HOTBIRD O 7 Fig 9 N USB Device 16 Jan 2012 16 12 PART 1 e English TABLE OF CONTENTS 1 0 INTRODUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 1 5 Usage of external USB devices 2 0 YOUR RECEIVER 2 1 Front Panel 2 2 Rear Panel 2 3 Remote Control Unit 2 4 Default PIN code 0000 2 5 Installing the Batteries 2 6 Using the Remote Control 3 0 CONNECTIONS 3 1 Basic connection with SCART cable 3 2 Connecting to Satellite Dish 3 3 Connecting to a Digital Audio Amplifier 3 4 Connecting to USB device 4 0 FIRS
18. lect the Position you like to use and press OK Press the RED button to Add SAT you like to install Select a transponder receivable at your location choose Transponder field and select the transponder with lt P Then choose GOTO X and press OK The dish will turn fast close to the right position Use the Move Step field for Fine Tuning and adjust the position of the dish with the lt P buttons Once the dish is adjusted to the desired position select the OK field and press OK to save Press the BLUE button to scan the position vou have set For Astra 19 2E after a scan the list starts with a pre installed list followed with new found channels Vou can save 32 satellite positions NOTE If your pre installed list Astra 19 2E is NOT giving any signal you are probably on the wrong satellite Press INFO button 3 x in viewing mode and try to get a high as possible signal for Strength and Quality 4 2 1 3 NONE Toneburst If you have no DiSEqC 1 0 1 1 or DiSEqC 1 2 USALS you can select NONE Press AW to select Toneburst and use lt P buttons to switch it OFF ON For Toneburst OFF you can edit 1 dish For Toneburst ON you can edit 2 dishes Press AW to select Receiver and press OK Here you can edit the dish settings Press the RED button to Add SAT you like to install Select a transponder receivable at your location choose the Transponder field and select the transponder with lt P Now you can turn your dish to get the hi
19. lt gt TEXT mi To connect to vour TV set using a SCART cable To connect to the input of your digital audio amplifier Your receiver requires a mains voltage of 100 240 V AC Auto selectable 50 60 Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet Fig 3 Turns the receiver On Stand by Mutes audio output of the receiver Changes channel and controls numeric functions Opens the available favourite list if previously configured Toggles between the two the last watched channels Opens the audio language s and mode selection Opens the subtitle language s selection Shows the information banner Displays the main menu and returns to the previous level of menu Opens the EPG Electronic Program Guide in TV mode Exits from any menu and sub menu or cancels the progressing function Switches to the previous next program in TV mode Moves the cursor upwards downwards in menu mode In TV mode it displays the channel list according to the chosen mode In menu mode activates the highlighted menu item Increases decreases the volume level in TV mode Changes settings for specific menu items in menu mode Opens the Teletext language s selection Freezes your live audio and video press again to cancel COLOURED BUTTONS TV RADIO For Teletext and further menu functions In viewing mode toggles between TV and radio mode Fig 5 Remove the battery cover from the remote control and put 2xAAA size
20. or Parental Control No Restriction All Programmes 02 18 This option will ask you for a pin code if you try to enter a channel with your restrictions Default pin code 0000 5 4 3 4 Change PIN Press lt P to change settings for Change PIN Yes or No If you select Yes this option will ask you to Enter Old PIN code first and then you will be asked to Enter New PIN for 2 times 5 4 4 Set Timer Press AW to select Set Timer and press OK This option will bring you to a timer screen To Add a timer push the RED button and use AW lt P to change settings Your receiver will switch to the right channel at the right time even from standby You are able to set 10 timers at most If you would like to change a timer setting use AW to highlight the timer number and use the RED button for Edit or the GREEN button to Delete www strong tv 1 lt S7RONG PART 1 o English DIGITAL TV 5 4 5 Set Default Press AW to select Set Default and press OK A pop up screen will ask you Set factory default Press OK or EXIT Please be careful when using this function as it will erase all the data and parameters you may have set earlier Once you have set to Default you will have to re install your preferences and re scan channels The receiver will return to its factory default state and all user data will be deleted NOTE Before you set to Default make a backup on a USB Device Chapter 5 4 6 3 Backup to USB NOTE Your
21. xit 12 www strong tv PART 1 s English STRONG DIGITAL TV Warning NEVER disconnect the USB device from the receiver the receiver from the main or switch the power OFF during the update backup procedure It can damage your receiver and warranty will void As soon as the update has been finished the receiver restarts automatically NOTE You can also load a backup file with your backup settings See chapter 5 4 6 3 5 4 6 3 Backup to USB Use AW to move to Backup to USB and press OK USB device should be connected To backup your User Database press OK and it will save your User Database You can use this Backup File in Update by USB Read chapter 5 4 6 2 Warning NEVER disconnect the USB device from the receiver the receiver from the main or switch the power OFF during the update backup procedure It can damage your receiver and warranty will void As soon as the update has been finished the receiver restarts automatically 6 0 CHANGING CHANNEL LIST MODE To change between TV and Radio channel lists use TV RADIO in normal viewing mode To change channel list to Favourite in normal viewing mode press FAV Use FAV again to select other favourite groups or Satlists Now select the desired channel and press OK to switch to full screen mode 7 0 AUDIO LANGUAGE SELECTION Press AUDIO to select the audio language Select Audio Channel or Audio mode with AW lt gt and make your selection Stereo Left or Right channel
Download Pdf Manuals
Related Search