Omnitron iConverter RS232
Contents
1. osr Omnitron Systems Technology Inc iConverter RS232 Serial RS 232 to Fiber Media Converter User Manual Port 1 P1 Port 2 P2 iConverter RS232 Models Fiber Type Fiber C fort Dual Fiber DF Distance pee ee ee Wavelength nm C SM DF 1310 8761 1 8763 1 8767 1 SM DF 1310 8761 2 8763 2 8767 2 SM DF 1550 120km 8763 3 8767 3 When ordering module with terminal block serial port append T before the dash in the part number Examples 8760T 0 8763T 3 8770T 1 Page 1 printer Setting this DIP Switch to the DTE position configures the RS232 to connect to Data Terminal Equipment such as a computer or controller Please refer to the PORT STRUCTURE section of this manual for more details MOUNTING AND CABLE ATTACHMENT iConverter modules are hot swappable and can be installed into any chassis in the iConverter family 1 After configuring the DIP Switches carefully slide the Converter module into the installation slot aligning the module with the installation guides Ensure that the module is firmly seated against the Backplane 2 Secure the module by fastening the panel thumb screw attached to the module to chassis front 3 Attach the serial ports via a DB 9 serial cable or an open end serial cable to a serial RS 232 device 4 Attach the fiber port via an appropriate multimode or single mode fiber cable to a 1OOBASE FX Fast Ethernet device The iConverter transm2. ro n ou Cesme o for m aE oes saraor osr n foo renes osea avs oor w omer sew ors n Tov C ioraa m n ou Warning The operating description in this Instruction Manual is for use by qualified personnel only To avoid electrical shock do not perform any servicing of this unit other than that contained in the operating instructions unless you are qualified and certified to do so by Omnitron Systems Technology Inc Warranty This product is warranted to the original purchaser against defects in material and workmanship for a period of TWO YEARS from the date of shipment A LIFETIME warranty may be obtained by the original purchaser by REGISTERING this product with Omnitron within 90 days from the date of shipment TO REGISTER COMPLETE AND MAIL OR FAX THE ENCLOSED REGISTRATION FORM TO THE INDICATED ADDRESS Or you may register your product on the Internet at www omnitron systems com During the warranty period Omnitron will at its option repair or replace a product which is proven to be defective For warranty service the product must be sent to an Omnitron designated facility at Buyer s expense Omnitron will pay the shipping charge to return the product to Buyers designated US address using Omnitron s standard shipping method Limitation of Warranty The foregoing warranty shall not apply to defects resulting from improper or inadequate use and or maintenance of the equipment by Buyer Buyer suppli
3. age 5 or tampering with equipment including removal of equipment cover by personnel not specifically authorized and certified by Omnitron or misuse or operating outside the environmental specification of the product including but not limited to voltage ambient temperature radiation unusual dust etc or improper site preparation or maintenance No other warranty is expressed or implied Omnitron specifically disclaims the implied warranties of merchantability and fitness for any particular purpose Exclusive Remedies The remedies provided herein are the Buyer s sole and exclusive remedies Omnitron shall not be liable for any direct indirect special incidental or consequential damages whether based on contract tort or any legal theory TECHNICAL SUPPORT For help with this product contact our Technical Support Phone 949 250 6510 Fax 949 250 6514 Address Omnitron Systems Technology Inc 140 Technology Dr Irvine CA 92618 USA E mail support omnitron systems com URL www omnitron systems com Form 040 08760 001D 12 12 Page 10
4. connector The RS232 automatically detects the signal baud rate of the connected serial device ranging from 110 to 921 600 baud The RS232 automatically adjusts to changes in the connected device s baud rate during operation without reconfiguration or interruption Page 2 RS232 LED INDICATORS sary sees Color oft State On Blinking State egend Power Pwr Aber No Power Modo ras power Solid Master mode Tx pattern sent but no Rx received 10 Hz Blinking 10x per Fiber Loop iceri Normal second Master mode Tx back Test Tst Mode pattern sent and Rx pattern received 1 Hz Blinking once per second Slave mode Rx pattern received ae Link and coon Pere Fiber k f porer kia Fiber Data ae Act coon fy TTanemiscion DTE Mode Green UTE mode DTE mode selected not selected DCE Mode Green DCE mode DCE mode selected not selected Serial Activities Green No serial Serial data received Act data Solid Fiber Link Page 7 Connection to DTE or DCE devices is configured by an easily accessible DIP Switch on the front panel A built in remote Fiber Loop Back DIP Switch provides easy validation of the entire fiber segment from either terminal RS232 converter without having to enable this function on both converters The RS232 is designed to work in any iConverter chassis When installed in a multi module chassis the RS232 can be remotely monitored and managed by software control The iConverter 19 Mo
5. dule 5 Module and 2 Module chassis all support the software control feature The 1 Module chassis supports RS232 as a standalone serial to fiber converter Note that software control for remote configuration of the RS232 requires a multi module chassis with an iConverter Management Module such as the Network Management Module NMM For more information on using and configuring RS232 via software control please refer to the NetOutlook Management Software user manual PORT STRUCTURE Front Panel Ports The front panel of the iConverter RS232 features one fiber port P1 and one RS 232 serial port P2 Depending on the model the serial port is available either as a DB 9 female connector or as a terminal block for field wiring Please refer to Fig 1a and Fig 1b for connector pin out assignment Page3 RS232 SPECIFICATIONS Protocols Asynchronous Serial RS 232 Copper DB 9 Female or Connectors Terminal Block Fiber Connectors ale ia Controls DTE DCE Fiber Loop Back Power Test Fiber Lnk Act EED DTE DCE Serial Act W 0 85 x D 4 5 x H 2 8 Model Type UL CE FCC Class A Power Requirement 0 5A 3 3VDC typical Standard 0 to 50 C Temperature Wide 40 to 60 C Storage 40 to 80 C Humidity 5 to 95 non condensing MTBF hrs 850 000 Compliance Page 8 S O OOOO A 0000 e Fig 1a DB 9 Connector Pin Out Assignment ssignment Data Carrier Detect eae oo n fo renea oaa
6. ed equipment Buyer supplied interfacing unauthorized modifications Page 9 DIP SWITCH SETTINGS cM Norm FLB J DCE DTE v E Mm Fig 2 Front Panel DIP Switches SW1 Normal and Fiber Loop Back Norm FLB DIP Switch When the Normal and Fiber Loop Back Norm FLB DIP Switch is in the normal mode Norm position factory default the Fiber Loop Back is disabled Setting this DIP Switch to the FLB position on the RS232 at either end of the fiber segment will enable the Fiber Loop Back test When Fiber Loop back is enabled the local RS232 with the DIP Switch in FLB position is the master and the remote RS232 with the DIP Switch in Norm position is the slave The Tst LED on the master will blink rapidly 10 times per second and the Tst LED on the slave will blink slowly once per second if the fiber segment passes the Loop back test If the fiber segment fails the Loop back test the Tst LED on master unit will remain solid Note that the Fiber Loop back test does not interfere with serial conversion and signal transmission Note that only one RS232 on either end of the fiber segment needs to be set to FLB position during the Loop back test SW2 Serial DCE DTE DIP Switch When the DCE DTE DIP Switch is in the DCE position factory default the RS232 is configured to connect to Data Communications Equipment such as a modem or P
7. it Tx must attach to the receive side on the other device the receive Rx must attach to the transmit side 5 When using single fiber SF media converter models the Tx wavelength on one end has to match the Rx wavelength on the other Note that based on this guideline the SF media converter models must be used in pairs such as the 8770 1 matched with the 8771 1 Page 6 iConverter RS232 Single Fiber Models Distance mIger ype SC Fiber Type or Single Fiber SF Wavelength nm SMSF Tx1310 Rx1550 SARM sue SM SF Tx 1550 Rx 1310 20km 8771 1 SM SF Tx1310 Rx1550 auem nae SMSF Tx 1550 Rx 1310 40km Beia For wide temperature 40 to 60 C add a W to the end of the model number Consult factory for extended temperature 40 to 75 C models When using single fiber SF media converter models the Tx wavelength on one end has to match the Rx wavelength on the other When ordering module with terminal block serial port append T before the dash in the part number Examples 8760T 0 87631 3 OVERVIEW The Omnitron iConverter RS232 is a manageable serial RS 232 to fiber converter that transmits serial signals over fiber media Fiber transmission can extend serial signals up to 120km and is immune from electrical and magnetic interference The RS232 is available with a single mode multimode or single fiber transceiver The serial port is available with a DB 9 female connector or terminal block
Download Pdf Manuals
Related Search