Teufel RearStation 4 Expansion Kit
Contents
1. Batteries in the remote control are empty Insert new batteries Care and cleaning Clean the devices regularly with a soft damp microfibre cloth In the process be absolutely sure to observe the following notes Danger Risk of electric shock In contact with live parts water can lead to electric shock or short circuit e Ensure that no liquid penetrates the unit e Disconnect the mains plug before cleaning Attention Risk of damage Using the wrong cleaning materials may dam age the delicate surface of the case e If possible use only plain water with no cleaning prod ucts In case of stubborn marks a mild soap solution may be used e Under no circumstances should caustic cleaning prod ucts white spirit thinners petrol or similar be used for cleaning Teufel RearStation 4 11 Protecting the environment Batteries and rechargeable batteries Batteries and rechargeable batteries must not be disposed of with household waste Every consumer is required by law to bring all batteries and rechargeable batteries whether they contain harmful substances or not to a collection point run by the communal authority or borough or run commercially so that they can be disposed of in an envi ronmentally friendly manner Please only hand in fully discharged batteries labelled Cd cadmium Hg mercury Pb lead Technical data Operating voltage of the mains adapters Power consumption2. and do not apply if you have only pur chased a separate receiver as an extension kit Check to be sure e Check that all items have been delivered and that noth ing is damaged e If the delivery is incomplete or you find damage sus tained in transit do not operate the unit but contact our service department see page 3 e Ensure sufficient ventilation e Do not place the unit in direct sunlight e Do not cover the ventilation slots with curtains cloths newspapers or similar Heat build up inside the unit can shorten the lifetime of the unit Attention Risk of damage Power overload due to lightning strike may damage or destroy the unit e If the unit is to be left unsupervised for a long period e g during a holiday or if a thunderstorm is forecast disconnect it from the mains power supply e If the device is subjected to warm temperatures after being cold e g after transport condensation may occur inside of it Wait at least 2 hours before you con nect and activate it e Old used batteries may leak Remove the batteries from the remote control if you do not use them for a prolonged period of time Teufel RearStation 4 5 Control elements and connections Transmitter RS 4 WLT Front side Back side Line In Auto On Channel O O O e Right Left 12A sve Pos Name Description Pos Name Description 1 Infrared receiver 4 Powe
3. cover a distance of 20 metres but that may be reduced by objects furniture and walls The RearStation 4 is therefore ideal for driving the back speakers of a 5 1 7 1 home cinema system if the AV receiver outputs the rear channels on RCA jacks line level With some receiver models it may be necessary to activate these line outputs in the settings It is also possible to transmit sound to multiple rooms as long as the walls are not made of reinforced concrete or the like You can supply multiple receivers with sound from one transmitter and still separately control the functions activation deactivation volume with the zone buttons 20 A B C in three groups All transmitters and receivers have infrared receivers and transmit any commands received to the other devices by RF link Thus you can control the entire system or specific speakers with the remote control from each device Connecting the speakers To connect the speakers use high quality two strand speaker wires with a copper area of at least 0 75 mm You can find corresponding cables and pin plugs in our webshop www teufelaudio com in the Accessories area The terminals 13 Speakers for the left Left and right Right speakers are located on the back of the receiver Channel O a O Rigt 21h The individual terminals are marked red and black He
4. or furniture on underdimensioned brackets etc The device could tip or fall down and cause injury to persons or be damaged itself Arrange the speakers so that they cannot be knocked over accidentally and make sure that the cables do not pose a trip hazard Ensure that any wall mounting is performed in a profes sional manner Only use suitable wall brackets for mounting Check the carrying capacity of the walls Only set up the device and the speakers on stable level surfaces e Do not place the unit near sources of heat e g heat ers ovens other heat generating equipment such as amplifiers etc Danger Danger of explosion Batteries and rechargeable batteries may explode if overheated e Do not store the button cell together with other metallic objects e Do not recharge or open the button cell and do not expose it to heat or dispose of it in fire e Do not take hold of the button cell with tweezers e Do not expose batteries or rechargeable batteries to heat and never throw them in open fire Attention Fire hazard Improper use may lead to damage or fire e Do not place open flames such as burning candles or similar on the unit Overview Product contents 1 x transmitter RS 4 WLT 1 x receiver RS 4 WLR 1 x remote control RS 4 RC 1 x button cell for the remote control 1 x mains adapter for the receiver 1 x mains cable for 1 x mains adapter for the transmitter The items
5. to assign a receiver to a zone with the remote control and within eight seconds after the mains voltage has been activated e Pull the plug of the mains adapter out of the jack 12 Power and wait approx 5 seconds e Insert the mains adapter plug back in the jack 12 Power e Hold the remote control in front of the receiver and push the button 20 A B C with the desired zone The power LED 11 briefly flashes between red and blue Thus the receiver is assigned to the zone Sound delay The digital transmission system of the RearStation 4 delays the sound signal by 20 milliseconds If a surround sound system is used you should compensate this delay as follows e If the distances of the speakers can be changed in the receiver settings enter a distance increased by seven metres for the RF channels This additional distance corresponds to a delay of 20 ms Example You are us ing the RearStation 4 for the two rear speakers which are set up three metres behind the listening position Then enter a speaker distance of 10 metres 3 m 7 m for the corresponding receiver setting e If the delay must be set directly in milliseconds in the receiver settings reduce either the delay of the chan nels by 20 ms or increase the delay time of all wired channels by 20 ms 10 Jeufel RearStation 4 Power _ Speaker Chann
6. burning odour or emits unusual sounds immediately disconnect it from the mains and discontinue use The standby button does not disconnect the device from the power supply For this reason connect it to an easily accessible socket so that you can quickly discon nect it from the power supply in the event of faults Never open the unit case Repairs may only be carried out by an authorised specialist workshop Only use parts which conform with the original unit specifications There are electrical and mechanical parts in this unit which are essential in order to avoid exposure to sources of danger Do not insert any object through the vent slots in the case e Only use the unit in indoor areas e Do not operate the unit in moist areas and protect it from drops of water or splash water Also take care not to stand vases or other containers of liquid on or near the unit in order to avoid liquid getting into the case If water or other foreign bodies should enter the case disconnect it immediately from the mains power supply and remove any batteries Send the unit to our service address e Never touch the mains adapter with wet hands e Check the unit regularly for damage Teufel RearStation 4 Danger Danger to children Children often do not recognise dangers and require special supervision for this reason Do not allow children to play with the unit or the pack ing film Danger of suffocation Ensure that children do not remo
7. e RF channel 1 2 or 3 that you wish to use The transmitter and receiver must be set to the same RF channel ower Line In Auto On Channel O O oft sB 2 A aoB 3 Right Left O Speaker Channel ww KEY KEY KE Right tet Jm Teufel RearStation 4 9 Zone You can assign one of three zones A B or C to each re ceiver This is useful when operating multiple receivers on one transmitter e g when transmitting sound to several rooms The functions for activation deactivation muting and vol ume control normally apply to all devices that are using the same RF channel If one of the zone buttons 20 A B C is pushed on the remote control the function is only performed by the devices which are assigned to this zone This makes it possible for example to reduce the volume in a specific room only If a receiver is assigned to a zone then the functions of its volume buttons 8 mp and 10 mg and the mute button 9 4 are only valid for devices in the same zone It is therefore possible to stop the sound transmission to a receiver in one room while music continues to play in other rooms By factory default all devices are assigned to zone A Setting the zone It is only possible
8. ed eee ete ek EUR RS eck need dd 12 2 Teufel RearStation 4 General notes and information Notice The information in this document may be changed with out prior notice and in no way constitutes any liability on the part of Lautsprecher Teufel GmbH No part of these instructions may be reproduced in any form or be broadcasted in any way electronically me chanically by photocopy or recording without the written permission of Lautsprecher Teufel GmbH Lautsprecher Teufel GmbH Version 1 0 August 2010 Original packaging If you wish to exercise your eight week right of return we ask that you be absolutely sure to hold onto the packa ging We can only accept the return of the device WITH THE ORIGINAL PACKAGING Empty boxes are not available Complaints In case of complaint we will need the following informa tion fo process your enquiry 1 Invoice Number Can be found on the sales slip enclosed with the product or on the order confirmation received as a PDF document e g 4322543 2 Serial batch number Located on the back of the device e g Serial RS00400340122A 123 Many thanks for your support Contact For questions suggestions or any other issues please contact our customer service department Lautsprecher Teufel GmbH Gewerbehof Buelowbogen Buelowstrasse 66 10783 Berlin Germany Tel 00800 200 300 40 free of charge Fax 49 0 30 300 930 930 www teufelaudio com Proper use O
9. el TO SN EQ 6B o o dy OO ve E Right left i Troubleshooting The following instructions should help you to solve problems If this doesn t work please contact our hotline see page 3 Mind the warranty instructions Problem Possible cause Solution Device is not working the No power supply power LED is dark Check that the power plug is properly inserted Check the function of the power outlet with another device No playback interrupted Audio connection to the source device Check the connector cable between transmit ter and source Muted speakers MUTE Push the button 9 or 17 in order to deac tivate mute No sound or only one speaker audible Speaker incorrectly wired Check and correct wiring power LED is on or flicker RF channels No or distorted playback Transmitter and receiver are set to different Set the transmitter and receiver to the same RF channel 1 2 or 3 see page 9 distorted by obstacles ing red Radio range exceeded or radio wave Place the unit closer together or higher up people are also obstacles for radio waves Remote control doesn t work trol and the device No line of sight between the remote con Remove any obstacles Remote control not pointed properly Point the remote control towards the device Receiver is assigned to another zone Set the zone again see page 10
10. ing instructions Technical description and operat Radio Transmission System for Speakers RearStation 4 Jeufel Contents General notes and information ee ee ee eee ee ee ee 3 Safety notes oo oan eee a ewe ee rb ee eka Om BIS PERSE Dew RS 4 Overview z 15S Ss art AS i ee EO Oe a See ee a 5 Control elements and connections 1 ee ee ee ee ew ee ee ee ee ees 6 Setup and connection oe dak ee Sider eae eS ed Rh a EO ie ew Se Sad we See WA 7 Setup location 18 Ava a hol BALE See GR A ay Go Reel aS Goh Bh Ee eh Se ee eS 7 Connecting the spedkers wii edad ts Shag a Ghee aie Ge ete at a GS tt 7 Audio inputsy ey sede Ate Gen 4a Ge ee Oe a hye Ge he Sh e aes Pe eee Sa eee ee ee 7 Connecting to di power supply s ses a lt 2 e Bergh Pan Ee ae eG MEG ak a MS a A ek aed 8 Remote control ss sc 04 6 ORL we Be Oa bee Se eae OREM AR wee eR EE ewe ees 8 Changing the Batteries sc dic ah A He th Ee Dk AE GE A Gy OE BR a 8 Functionality lt lt Saxe God Boni te OS Betta a A A a lt Bet SS ee r 8 Basic t nchons Fco AS one ee ae tee had Seah eles we 9 Activating and deactivating cto et e Ra ee ha Wig A ghee ee 9 Adjusting the volume syo s oak gh A AAA Boe Sy AM bee A Ea ee A as 9 A we get NN 9 Troubleshooting s i s6 a SA A Ee NE we ee a Oe 1 Core dnd cleaning A A A ae Sk IA 1 Protecting the environment o e 12 Technical data a nde Sonik Ss ae es ecb be a
11. ket Remote control Changing the batteries A 3 Volt button cell type CR2025 is provided for the operation of the remote control included in the product contents Hold the remote control 3 with the bottom up Push the bar on the battery compartment to the middle A and pull out the compartment B If applicable remove the old batteries please observe the notes on page 12 e Place the new battery 4 in the bracket In the proc ess the signs must be visible on the battery and on the bracket e Put the bracket back into the unit and push the com partment until it locks into place Functionality The remote control transmits infrared control signals For this it is necessary that you point the remote control towards the front of the device Ensure that no objects are in the way of the infrared signal Fluorescent lamps and energy saving lamps installed close nearby may affect the functions of the remote con trol or even prevent it from working 8 Teufel RearStation 4 Line In Right er Auto On Channel g O0 oe J E 124 Left Right Left Speaker c D OAO OA B O e OD O lt D xD SE lt DD gt 12 Basic functions Activating and deactivating After you connected the mains adapters the devices are in standby mode Activation e Push the button 15 On on the remo
12. max Output Dimensions W x H x D Disposing of the unit Used units must not be disposed of with house hold waste If the unit is no longer operational every consumer is required by law to dispose of MMMM used devices separate from household waste e g ata collection point run by the communal author ity borough In this way used devices can be recycled and waste materials disposed of in an environmentally friendly manner For this reason electrical equipment is labelled with the displayed symbol 100 240 V 50 60 Hz 5 W transmitter 80 W receiver 2 x 30 W nominal 4 Ohm 110 x 32 x 86 mm transmitter 125 x 42 x 180 mm receiver Technical changes reserved This product conforms with Council of the C European Union guidelines 2004 108 EC and 2006 95 EC For questions suggestions or other issues please contact our customer service department Lautsprecher Teufel GmbH Tel 00800 200 300 40 toll free No liability is accepted for the Gewerbehof Buelowbogen Aufgang D1 Fax 49 0 30 300930930 accuracy of this information Tech 10783 Berlin Germany Buelowstr 66 www teufelaudio com nical changes typographical errors and other errors reserved Instruction No 91538_GB HC 20100825
13. nly use the unit as described in these instructions Any other use will be deemed as not in accordance with the instructions and may lead to damage to property or even persons The manufacturer accepts no liability for dam age caused by use not in accordance with the instruc tions The unit is intended for private use Before operating the unit for the first time please read the safety notes and operating instructions carefully This is the only way to use all functions safely and reliably Keep the operating instructions safe and pass them on to anyone who may own the unit after you Teufel RearStation 4 3 Safety notes Caution icons You will find the following caution icons used in these instructions Danger High risk Failure to observe the warning may result in severe personal injury or death Attention Moderate risk Failure to observe the warning may result in property damage Minor risk H Points which should be observed when han dling the unit Safety notes Danger Risk of electric shock Faulty installation of electrical equipment or mains voltage which is too high can cause electric shocks The mains adapters are only suitable for a mains volt age of 100 V 240 V 50Hz 60 Hz If the unit s case or mains cable is defective or shows other signs of visible damage disconnect the mains adapter immediately from the socket and do not oper ate the device If the device produces smoke a
14. r Connection for mains adapter 2 0 Switch the device on or to stand 5 Line In Audio input jacks by 6 Auto On Switch for automatic activation 3 Power LED deactivation 7 Channel Select the RF channel Receiver RS 4 WLR Front side Back side Power Speaker e Right Left i 3 21V 25A Channel Pos Name Description Pos Name Description 8 md Reduce the volume 12 Power Connection for mains adapter 9 a Mute the speakers 13 Speaker Connections for speakers 10 Increase the volume 14 Channel Select the RF channel nm Power LED Remote control Pos Name Description 15 On Activate the devices 16 Off Switch the devices to standby 7 A Mute the speakers 18 Increase the volume 19 Reduce the volume 20 ABC Zone buttons 6 Teufel RearStation 4 Setup and connection Setup location e Select a stable level base e Make sure that the environment is clean and free from dust e Avoid placing the unit close to sources of heat or in direct sunlight e Arrange the connector cables so that they do not pose a trip hazard e Do not place any heavy objects on top of the cables or the unit With the transmitter receiver combination RearStation A you can send stereo audio signals to two speakers via wireless link this eliminates the need for installing speaker cables The system can
15. re you can connect the speaker cables directly or with pin plugs We only describe the direct connection in these instructions Make sure the polarity is correct L Connect the like coloured terminals with one another Otherwise the sound quality will suf fer The strands of the speaker wire are marked with different colours or shapes 4 Split the speaker cables down to approx 30 mm on both ends and strip off approx 10 mm of insula tion on each of them Twist the single wire together so that no strands are protruding Turn the connector terminal 13 counter clockwise until loose Run the stripped cable end into the hole that is now vis ible Turn the terminal clockwise The Lb S cable has now been clamped in place RL The operating instructions for the speakers should de scribe how to connect the cables to the speakers Audio inputs Connect the source device with analogue sound to the jacks 5 Line In For this you will need a dual RCA cable L and R Teufel RearStation 4 7 Connecting to a power supply Transmitter e Connect the small plug of the mains adapter 7 with the jack 4 Power of the transmitter 1 e Insert the mains adapter 7 in a mains socket Receiver e Insert the small plug of the mains cable 6 in the mains adapter jack 5 Insert the small plug of the mains adapter 5 in the jack 12 of the receiver Insert the mains plug of the mains cable in a mains soc
16. te control e Push the button 2 on the transmitter e Push the volume button 8 mp or 10 m on the receiver Switching to standby e Push the button 16 Off on the remote control e Push the button 2 O on the transmitter e Push and hold the button 9 g on the receiver for approx four seconds Power LED The power LEDs 3 and 11 are blue during normal opera tion If there is no radio connection with the other device the power LEDs are red Adjusting the volume e Increasing the volume Push the button 18 Volume or button 10 m respectively e Reducing the volume Push the button 19 Volume or button 8 mp respectively Mute e Turning off the sound Push the button 17 or 9 g respectively e Turning the sound back on Push the button 17 or 9 4 respectively again or adjust the volume Settings Impedance By factory default the amplifier of the receiver is set to match a speaker impedance of 4 ohm If your speakers have another Impedance you can adjust the amplifier as follows Hold the remote control in front of the receiver Push and hold the button 17 4 for more than three seconds The Power LED 11 alternately flashes blue and red now Within four seconds push one of the zone buttons 20 A B C A Impedance 4 ohm B Impedance 6 ohm C Impedance 8 ohm RF channel With the switches 7 and 14 Channel select th
17. ve small parts from the unit e g buttons or plug adapters They could swal low the parts and choke Never allow children to operate electrical devices unsupervised Store the button cell out of the reach of children If a child accidentally ingests the button cell immediately contact a physician Danger Danger to hearing Loud noise may lead to hearing loss The system may emit very high sound pressure levels unexpectedly when it is suddenly triggered into activity by a bass impulse especially in mode Standby Auto On and if it has been set to full volume In addi tion to physical injury psychological stress may also be caused as a result Children and pets are particularly sensitive to noise Set your signal source unit volume control to a low setting When the volume is set high always keep a certain distance from the unit and never place your ear directly on the speaker To avoid damage to health avoid extended listening at high volume Danger Danger of chemical burns Leaking battery acid may lead to chemical burns Do not allow battery acid to come into contact with skin eyes or mucus membranes In case of contact with acid rinse the affected location immediately with plenty of plain water and if necessary see a doctor Danger Danger of injury damage Incorrect location may result in damage Do not use the device unmounted in vehicles without having it secured in unstable locations on wobbly tripods
Download Pdf Manuals
Related Search