Home

Olympus SP-720UZ

1. 4 Viewing the image immediately after shooting Rec View Camera Menu 2 Rec View Submenu 2 Application The image being recorded is not displayed This allows the user Off to prepare for the next shot while following the subject in the monitor after shooting The image being recorded is displayed This allows the user to make a brief check of the image that was just taken EN 37 Automatically rotating images shot with the camera in a vertical position during playback Pic Orientation Camera Menu 2 Pic Orientation During shooting the p 42 setting on the playback menu is set automatically 2 This function may not work properly if the camera is facing up or down during shooting Submenu 2 Application Information about the vertical horizontal orientation of the camera during shooting is not recorded with Off gt images Images shot with the camera in a vertical position are not rotated during playback Information about the vertical horizontal orientation of the camera On during shooting is recorded with images Images are automatically rotated during playback Displaying icon guides Icon Guide Camera Menu 2 Icon Guide Submenu 2 Application off No icon guide is displayed The explanation of the selected icon will be displayed when a shooting mode or function menu icon is selected position the cursor on the
2. Be careful with the strap Be careful with the strap when you carry the camera It could easily catch on stray objects and cause serious damage Battery Handling Precautions Follow these important guidelines to prevent batteries from leaking overheating burning exploding or causing electrical shocks or burns A DANGER The camera uses a lithium ion battery specified by Olympus Charge the battery with the specified USB AC adapter or charger Do not use any other USB AC adapters or chargers Never heat or incinerate batteries Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects such as jewelry pins fasteners etc Never store batteries where they will be exposed to direct sunlight or subjected to high temperatures in a hot vehicle near a heat source etc To prevent causing battery leaks or damaging their terminals carefully follow all instructions regarding the use of batteries Never attempt to disassemble a battery or modify it in any way solder etc e If battery fluid gets into your eyes flush your eyes immediately with clear cold running water and seek medical attention immediately Always store batteries out of the reach of small children If a child accidentally swallows a battery seek medical attention immediately EN 65 If you cannot remove the battery from the camera contact an authorized distributor or service
3. TBISO A 14 Aperture value Battery check 3D image Eye Fi transferred Adding sound a Upload order Print reservation number of prints aa p 54 p 53 Current memory p 62 Frame number total number of images still images NNE naaa p 20 Elapsed time total shooting time movies p 21 15Histogram p 20 16 Exposure compensation 17 Shadow Adjustment 18 White balance A NEATE p 31 Technology 19 File number 20 Compression still images 21 Date and time 22 Image size 23 Volume _p 33 39 63 64 ee p 21 46 EN 5 Camera Settings Using the Buttons Frequently used functions can be accessed using the buttons Mode dial Changing the shooting mode p 24 Zoom lever p 18 22 Shutter button p 16 56 amp button switching between shooting and playback p 17 MENU butt 9 Arrow pad MENY tion p22 A up INFO button changing information display p 20 23 button lt 08 G right Y down button erase p 22 EN Operation guide The symbols A V P displayed for image selections and settings indicate that the arrow pad p 6 is to be used Back Operation guides displayed on the screen indicate that the MENU button button or zoom lever can be used Back a Operation guide ef Reset Compression Normal
4. Beijing Huan Shi East Road Guang Zhou Tel 86 10 58199199 Fax 86 10 59761360 Zip 100027 Tel 86 20 61227111 Fax 86 20 61227120 Zip 510095 A 32F Shanghai Industrial Investment Building 18 16F Huamin Hanzun Internation Plaza No 1 Fuxing Street Cao Xi Road N Xuhui District Shanghai Chengdu Tel 86 21 60823500 Fax 86 21 60823100 Zip 200030 Tel 86 28 86703531 Fax 86 28 86703532 Zip 610016 OLYMPUS HONG KONG AND CHINA LIMITED Digital Camera Repair Centre L4207 Office Tower Langham Place 8 Argyle Street Mongkok Kowloon Hong Kong Customer Hotline 852 2376 2150 Fax 852 2375 0630 http www olympus com hk 2012 OLYMPUS IMAGING CORP VN293301
5. RON Qa Indicator lamp N Attach the strap to the other eyelet in the same manner Pull the strap tight so that it does not come loose EN Monitor Shooting mode display 1 2 3 Shooting mode Zoom bar AWN 5 Macro super macro p 6 Self timer p 30 7 Exposure compensation PR TEE E ANAR TR p 31 White balance Y ISO 10 Drive 11 Image size still images SA Na p 33 63 12 Recording with sound movies p 39 13 Image size movies p 39 64 14 Continuous recording length MOVIES A p 17 ane Fi a Mr o cee eT yo 128 22212019 18 1716151413 4 EN 15 Movie recording icon p 17 16 World time 17 Image stabilization still images 18 Metering 19 Date stamp 20 Compression still images amin hiss stent p 35 63 21 Number of storable still pictures still images 22 Current memory 23 Battery check 24 Histogram 25 AF target mark 26 Aperture value 27 Shutter speed 28 Camera shake waming Playback mode display e Standard display 123456 7 89 A l Bar la avoi 21 D Still image e Advanced display DA ED of Bx10 MAGIC ak 1 1000 F3 2 o7 ta AUTO ED Nu 100 0004 42 02 26 12 30 123456 7 89 1011 12 1314 15 E Nor 100 0004 42 02 26 12 30 O NOOARWNH 10MAGIC mode 11 Shutter speed 12Shooting mode
6. e A Setup dialog will be displayed Windows Vista Windows 7 e An Autorun dialog will be displayed Click OLYMPUS Setup to display the Setup dialog owmpus a AR Trask you orpucreong tis preg post Registration OLYMPUS Viewer 2 oLymPus ib Camera Instruction Manual If the Setup dialog is not displayed select My 2 Computer Windows XP or Computer Windows Vista Windows 7 from the start menu Double click the CD ROM OLYMPUS Setup icon to open the OLYMPUS Setup window and then double click Launcher exe If a User Account Control dialog is displayed click Yes or Continue Register your Olympus product e Click the Registration button and follow the on screen instructions To register the camera must be connected to the computer Connecting the camera p 12 If nothing is displayed on the camera screen even after connecting the camera to the computer the battery may be exhausted Charge the battery and then connect the camera again Install OLYMPUS Viewer 2 and ib computer software e Check the system requirements before beginning installation e Click the OLYMPUS Viewer 2 or OLYMPUS ib button and follow the on screen instructions to install the software OLYMPUS Viewer 2 Operating Windows XP Service Pack 2 or later System Windows Vista Windows 7 Prosser P
7. 2B Power requirements AC 100 to 240 V 50 60 Hz Output DC 5V 500 mA Operating environment Temperature 0 C to 40 C 32 F to 104 F operation 20 C to 60 C 4 F to 140 F storage Design and specifications subject to change without notice HDMI the HDMI Logo and High Definition Multimedia TM Interface are trademarks or registered trademarks of HDMI Licensing LLC HIGH DEFINITION MULTIMEDIA INTERFACE 74 EN OLYMPUS KOREA CO LTD 10F Olympus Tower A 114 9 Samsung dong Gangnam gu Seoul Korea 135 090 http www olympus co kr Tel 1544 3200 OLYMPUS MALAYSIA SDN BHD 10 8 Menara 1 MK Kompleks 1 Mont Kiara No 1 Jalan Kiara Mont Kiara 50480 Kuala Lumpur Malaysia Tel 603 6411 0000 Fax 603 6411 0003 BRANCHES PENANG OFFICE KUCHING OFFICE Suite 3A 6 Level 3A Wisma Great Eastern Level 6 5A 6th Floor Menara MAA No 25 Lebuh Light 10200 Penang Lot 86 Section 53 Tel 604 262 2832 Fax 604 262 5832 Jalan Central Timur 93300 Kuching Sarawak Tel 6082 253 885 Fax 6082 256 885 http Awww olympus com my OLYMPUS http www olympus com OLYMPUS IMAGING CORP Shinjuku Monolith 3 1 Nishi Shinjuku 2 chome Shinjuku ku Tokyo Japan OLYMPUS IMAGING AMERICA INC 3500 Corporate Parkway P O Box 610 Center Valley PA 18034 0610 U S A Tel 484 896 5000 Technical Support USA Our phone customer support is available from 9 am to 9 pm 24 7 online aut
8. ISO setting although smaller values result in less sensitivity sharp images can be taken under fully lit conditions Larger values result in higher sensitivity and images can be taken at fast shutter speeds even under low light conditions However high sensitivity introduces noise into the resulting picture which may give it a grainy appearance Sequential shooting Drive Pictures are taken sequentially while the shutter button is held down 1 Select the drive option in the function menu INFO 2 Use lt I gt to select the setting option and press the button to set Option Description 2 Use Jd to select the setting option and oO One frame is shot each time the press the button to set shutter button is pressed The images are taken sequentially Option Description 12 while holding down the shutter Suitable for printing pictures over button 14M 4288x3216 3 11x17 in 57 The camera takes sequential shots Suitable for printing pictures up to 2m at a faster speed than in ja 8M 3264x2448 A3 11x17 in The camera takes sequential shots Suitable for printing pictures at A4 Ka at approximately 10 frames sec 5M 2560x1920 8 5 11 in The camera takes sequential shots Suitable for printing pictures up to Ka at approximately 30 frames sec 3M 2048 1536 A4 size 8 5 11 in When set to iii or hi0 Image Size is limited to IGM or lower and the ISO sensitivity is fixed to I
9. OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM The software in this camera may include third party software Any third party software is subject to the terms and conditions imposed by the owners or licensors of that software under which software is provided to you Those terms and other third party software notices if any may be found in the software notice PDF file stored within the accompanying CD ROM or at http www olympus co jp en support imsg digicamera download notice notice cfm Powered by ARCSOFT SPECIFICATIONS Camera Product type Digital camera for shooting and displaying Recording system Still pictures Digital recording JPEG in accordance with Design rule for Camera File system DCF Applicable Exif 2 3 Digital Print Order Format DPOF PRINT Image Matching III PictBridge standards 3D still image MP format Sound with still Wave format pictures Movie MOV H 264 linear PCM Memory Internal memory SD SDHC SDXC Eye Fi card No of effective pixels 14 000 000 pixels Image pickup device 1 2 3 CMOS primary color filter Lens Olympus lens 4 66 to 121 2 mm f3 2 to 5 6 Equivalent to 26 to 676 mm on a 35 mm film Photometric system Digital ESP me
10. Shadow Adjust Auto AF Mode Face iESP m ESPI ESP j Digital Zoom on 5 Image Stabilizer On z el E0 EN Using the Menu Use the menu to change camera settings There may be menus that are unavailable depending on other related settings or the shooting mode p 24 Function menu Press lt during shooting to display the function menu The function menu provides access to frequently used shooting settings Selected option Flash Auto Shooting Setup menu To select the function menu Use A V to select a menu and use IP to select a menu option Press the button to set the function menu EN Setup menu Press the MENU button during shooting or playback to display the setup menu The setup menu provides access to a variety of camera settings including options not listed in the function menu display options and the time and date 1 Press the MENU button e The setup menu is displayed Camera Menu 1 Compression Normal Shadow Adjust Auto AF Mode FaceliESP ESP ESP Digital Zoom on Image Stabilizer On 2 Press lt to select the page tabs Use A V to select the desired page tab and press D Page tab Submenu 1 Pixel Mapping TV Out NTSC Power Save off English os English World Time 3 Use A V to select the desired submenu 1 and then press the button Submenu 2 Power Sav English World Time 4 Use A V to select the desire
11. and white balance p 31 are locked at the first frame The flash p 19 is fixed to Flash Off mode Taking pictures with Auto Press the shutter button to take the first frame Move the camera slightly in the direction of the second frame Target mark Pointer aes Screen when combining images from left to right Move the camera slowly while keeping it straight and stop the camera where the pointer and target mark overlap e The camera releases the shutter automatically To combine only two pictures press the button before taking a third frame Repeat Step to take a third frame e After the third frame is taken the camera automatically processes the frames and the combined panorama image is displayed To exit the panorama function without saving an image press the MENU button If the shutter does not automatically release try Manual or PC Taking pictures with Manual Use AV lt I gt to specify at which edge the next picture is to be connected Direction for combining the next frame Press the shutter button to take the first frame The white boxed part of the first frame is displayed on joint area 1 1st frame Compose the next shot so that joint area 1 overlaps joint area 2 Press the shutter button to take the next shot Press the button to combine just 2 frames Repeat steps and to take a third frame e After the third
12. f Settings Menu 3 gt Beauty Settings Depending on the picture the editing may not be effective Use A V to select a retouching setting and press the button Press the shutter button to take a portrait picture The image is not saved Select a retouching item and press the button Eye Color Press the button on the review screen to save the image e Registration is complete Printing Direct printing PictBridge By connecting the camera to a PictBridge compatible printer you can print images directly without using a computer To find out if your printer supports PictBridge refer to the printer s instruction manual PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly The printing modes paper sizes and other parameters that can be set with the camera vary depending on the printer that is used For details refer to the printer s instruction manual For details on the available paper types loading paper and installing ink cassettes refer to the printer s instruction manual Printing images at the printer s Standard settings Easy Print In the setup menu set USB Connection to Print USB Connection p 45 1 Display the image to be printed on the monitor Viewing images p 20 2 Turn on the printer and then connect the printer and camera Multi connector
13. fall shock etc after purchase of the product d Any defect or damage that occurs due to fire earthquake flood damage thunderbolt other natural disasters environmental pollution and irregular voltage sources e Any defect that occurs due to careless or improper storage such as keeping the product under conditions of high temperature and humidity near insect repellents such as naphthalene or harmful drugs etc improper maintenance etc f Any defect that occurs due to exhausted batteries etc g Any defect that occurs due to sand mud etc entering the inside of the product casing h When this Warranty Certificate is not returned with the product i When any alterations whatsoever are made to the Warranty Certificate regarding the year month and date of purchase the customer s name the dealer s name and the serial number j When proof of purchase is not presented with this Warranty Certificate 4 This Warranty applies to the product only the Warranty does not apply to any other accessory equipment such as the case strap lens cap and batteries 5 Olympus sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product and in particular any loss or damage caused to any film or lenses or other equipment or accessories used with the product o
14. icon for a while to display the explanation 38 EN Flash Auto gm Oi The flash fires automatically Icon guide n low lights Imprinting the date of recording Date Stamp Camera Menu 2 gt Date Stamp Submenu 2 Application Off Do not imprint the date O Stamp new photographs with the n date of recording When the date and time are not set Date Stamp cannot be set Language date time and time zone p 15 le The date stamp can not be deleted Date Stamp is not available in Panorama p 26 or 3D Photo p 28 mode When drive settings p 32 are set to other than LI Date Stamp cannot be set Selecting the image size for movies Image Size D Movie Menu amp Image Size Submenu 2 Application ETN Select the image quality based on VGA 640x480 the image size and frame rate Number of storable pictures still images Continuous recording length movies in the internal memory and cards p 63 64 Recording sound when shooting movies 8 D Movie Menu gt amp Submenu 2 Application Off No sound is recorded On Sound is recorded EN 39 Menus for Playback Editing and Printing Functions The default settings of the function are highlighted in Playing back pictures automatically Slideshow Playback Menu Slideshow Submenu 2 Submenu 3 Application Off Cosm
15. listed below no matter if in use or storage Places where temperatures and or humidity are high or go through extreme changes Direct sunlight beaches locked cars or near other heat sources stove radiator etc or humidifiers In sandy or dusty environments Near flammable items or explosives In wet places such as bathrooms or in the rain When using products with weatherproof designs read their manuals as well In places prone to strong vibrations Never drop the camera or subject it to severe shocks or vibrations When attaching the camera to or removing it from a tripod rotate the tripod screw not the camera 66 EN Before transporting the camera remove a tripod and all other non OLYMPUS accessories Do not touch electric contacts on cameras Do not leave the camera pointed directly at the sun This may cause lens or shutter curtain damage color failure ghosting on the image pickup device or may possibly cause fires Do not push or pull severely on the lens Before storing the camera for a long period remove the batteries Select a cool dry location for storage to prevent condensation or mold from forming inside the camera After storage test the camera by turning it on and pressing the shutter button to make sure that it is operating normally The camera may malfunction if it is used in a location where it is subject to a magnetic electromagnetic field radio waves or high voltage
16. mark Press halfway Shutter speed Aperture value Focusing p 58 6 To take the picture gently press the shutter Shooting MOVIES button all the way down while being careful not to shake the camera 1 Press the button to start recording e Press fully Image review screen a i Lights up red To view images during shooting when recording Pressing the gt button enables playback of images To tu of return to shooting either press the gt button or press the Recording time shutter button halfway down Continuous recording length p 64 To turn off the camera Press the ON OFF button again The effects of the set shooting mode can be used when shooting movies When the set shooting mode is H 3D SCN some modes MAGIC some modes or BEAUTY shooting is performed in P mode Sound will also be recorded 2 Press the button again to stop recording EN 17 Using the zoom Turning the zoom lever adjusts the shooting range W side O T side Zoom bar 3x26 iino Optical zoom 26x Digital zoom 4x To take larger images Digital Zoom p 36 The type and amount of zoom can be identified from the appearance of the zoom bar The display differs depending on the options selected for Digital Zoom p 36 and Image Size p 33 18 EN Off selected for Digital Zoom Image size Zoom bar w T 14M m Optical zoom range w T Other To Th
17. screen or for making a precise composition by using the grid display CE EN 19 7 Press A INFO e The displayed shooting information changes in the order shown below each time the button is pressed Shooting mode display p 4 Normal K No information Bi me Detailed p q Sar H 2 A pms So mi to Bear rs Reading a histogram If the peak fills too much of the frame the image will appear mostly white If the peak fills too much of the frame the image will appear mostly black The green section shows luminance distribution within the screen s center 20 EN Viewing images 1 Press the gt button Number of frames Total number of images Playback image 2 Use lt D to select an image Displays previous image Displays next image Hold gt to fast forward and hold lt to reverse The display size of the images can be changed Index view and close up view p 22 To play sound recordings To play sound recorded with an image select the image and press the amp button During audio playback Press A V to adjust volume To play back movies Select a movie and press the button Movie During playback Pausing and Press the button to pause playback During pause fast peda at forward or reverse press the play button to restart playback Press D to fast forward Press gt Fast forw
18. such as near a TV set microwave video game loud speakers large monitor unit TV radio tower or transmission towers In such cases turn the camera off and on again before further operation Always observe the operating environment restrictions described in the camera s manual Battery This camera uses a lithium ion battery specified by Olympus Do not use any other type of battery If the battery s terminals get wet or greasy camera contact failure may result Wipe the battery well with a dry cloth before use Always charge a battery when using it for the first time or if it has not been used for a long period When operating the camera with battery power at low temperatures try to keep the camera and spare battery as warm as possible A battery that has run down at low temperatures may be restored after it is warmed at room temperature The number of pictures you can take may vary depending on the shooting conditions or battery Before going on a long trip and especially before traveling abroad purchase extra batteries A recommended battery may be difficult to obtain while traveling When storing the battery for a long period select a cool location for storage e Please recycle batteries to help save our planet s resources When you throw away dead batteries be sure to cover their terminals and always observe local laws and regulations Monitor Do not push the monitor forcibly otherwise the imag
19. the Guarantee does not apply to any other accessory equipment such as the case strap lens cap and batteries 4 Olympus s sole liability under this Guarantee shall be limited to repairing or replacing the product Any liability under the Guarantee for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect of the product and in particular any loss or damage caused to any lenses films other equipment or accessories used with the product or for any loss resulting from a delay in repair or loss of data is excluded Compelling regulations by law remain unaffected by this Notes regarding Guarantee maintenance 1 This Guarantee will only be valid if the Guarantee Certificate is duly completed by Olympus or an authorized dealer or other documents contain sufficient proof Therefore please make sure that your name the name of the dealer the serial number and the year month and date of purchase are all completed or the original invoice or the sales receipt indicating the dealer s name the date of purchase and product type is attached to this Guarantee Certificate Olympus reserves the right to refuse free of charge service if neither Guarantee Certificate is completed nor the above document is attached or if the information contained in it is incomplete or illegible 2 Since this Guarantee Certificate will not be re issued keep it in a safe place Please refer to the list on the web
20. 0 Self timer p 30 Exposure compensation p 31 White balance p 31 ISO p 32 Drive p 32 Image Size still images p 33 Menu functions in g 22 p 35 to 39 Yes No The settings will not be changed Selecting the image quality for still images Compression Camera Menu 1 gt Compression Submenu 2 Application Fine Shooting at high quality Normal Shooting at normal quality M amp Number of storable pictures still images Continuous recording length movies in the internal memory and cards p 63 64 Brightening the subject against backlight Shadow Adjust Camera Menu 1 gt Shadow Adjust Submenu 2 Application Automatically On when a compatible Auto A A shooting mode is selected Off The effect is not applied Shoot with automatic adjustment to On brighten an area that has become darker When set to Auto or On ESP Le p 36 is automatically fixed to ESP EN 35 Selecting the focusing area AF Mode KI Camera Menu 1 gt AF Mode Submenu 2 Application The camera focuses automatically If a face is detected it is shown by a white frame when the shutter button is pressed halfway and the camera focuses the frame turns to green If no face is detected the camera chooses a subject in the frame and focuses automatically Face iESP The camera focuses on the subject Spot located
21. 3 405 1600x1200 Ndu 18 5 572 Fite 16 4 715 KM 1280x960 lt 2 5 aris Fite 59 17 514 Wel 640x480 EA 5 rsu Fite 2 743 4288x2416 Z m Fite 10 3 143 1920x1080 KA E ae EN 63 Movies Continuous recording length Image Size Internal memory SD SDHC SDXC card 4GB With sound Without sound With sound Without sound 1920x1080 4 sec 4 sec 27 min 26 sec 28 min 33 sec 1280x720 6 sec 6 sec 29 min 29 min 640x480 21 sec 26 sec 137 min 7 sec 170 min 59 sec t The continuous recording length is up to 29 minutes in the HD quality specified The maximum file size of a single movie is 4 GB regardless of the capacity of the card Increasing the number of pictures that can be taken Either erase unwanted images or connect the camera to a computer or other device to save the images and then erase the images in the internal memory or card Erase p 22 41 Sel Image p 42 All Erase p 42 Memory Format Format p 44 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL A An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product If the product is used without ob
22. 3 Use D to select the mode and then press the button to set Sun Caj fi u MENU D Icon indicating the scene mode that is set In SCN modes the optimum shooting settings are pre programmed for specific shooting scenes Functions may be limited in some modes Option Application Q Portrait Landscape FA Night Scene s Night Portrait The camera S amp Sport 2 Indoor is Candle takes a picture Su Self Portrait 2 Sunset using the 2 Fireworks f Cuisine optimum settings amp Documents FJ Beach amp Snow for the scene WPet Mode Cat Pet Mode Dog conditions Backlight HDR When the subject is dark or when taking fireworks noise reduction is automatically activated This approximately doubles the shooting time during which no other pictures can be taken When set to RA Backlight HDR Image Size p 33 is limited to ERM or lower This is recommended for shooting a fixed subject Shooting with special effects MAGIC mode To add expression to your photo select the desired special effect 1 Set the shooting mode to MAGIC 2 Press lt to display the function menu 3 Use ID to select the desired effect and then press the button to set Icon indicating MAGIC mode that is set Shooting mode Option Magic Filter Pop Art Pin Hole Fish Eye Drawing Soft Focus Punk Sparkle Watercolor
23. Foreign Objects To avoid personal injury never insert a metal object into the product Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Handling the Camera A WARNING Do not use the camera near flammable or explosive gases Do not use the flash and LED including AF illuminator on people infants small children etc at close range You must be at least 1 m 3 ft away from the faces of your subjects Firing the flash too close to the subject s eyes could cause a momentary loss of vision Keep young children and infants away from the camera Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury Becoming entangled in the camera strap causing strangulation Accidentally swallowing the battery cards or other small parts Accidentally firing the flash into their own eyes or those of another child Accidentally being injured by the moving parts of the camera Do not look at the sun or strong lights with the camera Do not use or store the camera in dusty or humid places Do not cover the flash with a hand while firing Use SD SDHC SDXC memory cards or Eye Fi cards only Never use other types of cards If you accidently insert another type of card int
24. ION IMAGE OR DATA LOSS OR IMPAIRMENT OR FROM ANY OTHER CAUSE WHETHER LIABILITY IS ASSERTED IN CONTRACT TORT INCLUDING NEGLIGENCE AND STRICT PRODUCT LIABILITY OR OTHERWISE IN NO EVENT SHALL OLYMPUS BE LIABLE FOR ANY INDIRECT INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND INCLUDING WITHOUT LIMITATION LOSS OF PROFITS OR LOSS OF USE WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE Representations and warranties made by any person including but not limited to dealers representatives salespersons or agents of Olympus which are inconsistent or in conflict with or in addition to the terms of this limited warranty shall not be binding upon Olympus unless reduced to writing and approved by an expressly authorized officer of Olympus This limited warranty is the complete and exclusive statement of warranty which Olympus agrees to provide with respect to the Products and it shall supersede all prior and contemporaneous oral or written agreements understandings proposals and communications pertaining to the subject matter hereof This limited warranty is exclusively for the benefit of the original customer and cannot be transferred or assigned WHAT TO DO WHEN SERVICE IS NEEDED The customer must transfer any image or other data saved on a Product to another image or data storage medium and or remove any film from the Product prior to sending the Product to Olympus for
25. Instruction Manual button and follow the on screen instructions Macintosh 1 Insert the supplied CD in a CD ROM drive e Double click the CD OLYMPUS Setup icon on the desktop e Double click the Setup icon to display the Setup dialog ay WW gt e sA S s Thank you for purchasing this Ohms prosa Setup OLYMPUS Viewer 2 Camera instruction Manual 14 EN colors recommended Other languages can be selected from the language combo box For information on using the software see online help 3 Copy the camera manual e Click the Camera Instruction Manual button to open the folder containing the camera manuals Copy the manual for your language to the computer Language date time and time zone You can also choose the language for the menus and messages displayed in the monitor The date and time set here are saved to image file names date prints and other data 1 Press the ON OFF button to turn on the camera use AV lt to select your language and press the button The menus can be used to change the selected language 0 p 49 2 Use A V to select the year for Y Date and time setting screen 3 Press D to save the setting for Y 4 As in Steps 2 and 3 use A V lt to set M month D day Time hours and minutes and Y M D date order and then press the button For precise time setting press the
26. O Reflection Miniature Fragmented Dramatic The Image Size p 33 of the retouched image is limited to HMI or lower 2 Two images are saved an unmodified image and an image to which the effect has been applied EN 25 In MAGIC mode the optimum shooting settings are pre programmed for each scene effect For this reason some settings cannot be changed in some modes The selected effect is applied to the movie The effect may not be applied depending on the shooting mode Creating panoramic images mode 1 Set the shooting mode to M BB 4 Noe 2 Press lt to display the function menu 3 Use lt to select the desired mode and then press the button to set Submenu 1 Application Three frames are taken and combined by the camera The user only composes the shots so that the target marks and pointers overlap and the camera automatically releases the shutter Auto Three frames are taken and combined by the camera The user composes the shots using the guide frame and manually releases the shutter Manual The frames that were taken are PC combined into a panorama image using the PC software 26 EN For details on installing the PC software see Installing the PC software and registering user p 13 When set to Auto or Manual Image Size p 33 is fixed to 2MB or equivalent The focus exposure zoom position p 18
27. OLYMPUS DIGITAL CAMERA SP 720UZ Instruction Manual e Thank you for purchasing an Olympus digital camera Before you start to use your new camera please read these instructions carefully to enjoy optimum performance and a longer service life Keep this manual in a safe place for future reference e We recommend that you take test shots to get accustomed to your camera before taking important photographs e In the interest of continually improving products Olympus reserves the right to update or modify information contained in this manual Checking the contents of the box 2 Digital camera Strap Lens cap and Lithium lon USB cable AV cable USB AC OLYMPUS Setup lens cap strap Battery CB USB8 CB AVC3 adapter CD ROM LI 50B F 2AC Other accessories not shown Warranty card Contents may vary depending on purchase location Names of Parts Camera unit Flash AF illuminator Self timer lamp Lens Card slot Battery card cover Tripod socket Strap eyelet Speaker NONA Na Monitor MENU button button record movies D button switching between shooting and 5 playback button OK Arrow pad 2 INFO button changing _information display button erase 7 Multi connector 8 HDMI micro connector 9 Connector cover 10 Microphone 11 Mode dial 12 Zoom lever 13 Shutter button 14 ON OFF button
28. SO Auto When set to other than LJ the flash is fixed to Flash Off When set to f0 or Hii the digital zoom p 18 is not available With settings other than OO the focus exposure and the white balance are fixed when the first frame is shot Selecting the image size for still images Image Size 1 Select the image size option in the function menu 2M 1600x1200 Suitable for 5x7 in printing pictures at A5 1M 1280x960 Suitable for postcard size printing pictures at VGA 640x480 Suitable for TV or using web sites viewing pictures on a pictures on emails and 16 9L 4288x2416 Suitable for widescreen A3 or 11 1 playing pictures ona TV and for printing on Ms 16 98 1920x1080 Suitable for playing pictures on a widescreen TV and for printing on A5 or 5 x7 EN 33 Using the playback functions Playing back panorama images Panorama images that were combined together using Auto or Manual can be scrolled for viewing Creating panoramic images FX mode p 26 1 Select a panorama image during playback Viewing images p 20 Replay OK 42 02 26 12 30 2 Press the button Viewing area To control panorama image playback Zoom in Zoom out Press the button to pause playback Then turn the zoom lever to enlarge shrink the image Playback direction Press the button to pause playback Then pr
29. USB cable supplied ad Open the connector cover in the direction of the arrow 3 Press D to start printing To print another image use lt gt to select an image and press the button To exit printing After a selected image is displayed on the screen disconnect the USB cable from the camera and printer EN 51 Changing the printer s settings for printing Custom Print 1 Follow Steps 1 and 2 for Easy Print p 51 2 Press the amp button 3 Use A V to select the print mode and press the button 5 Use A V to select the Borderless or Pics Sheet settings and press the button Submenu 4 Application The image is printed with a border Off On t around it Off The image is printed to fill the entire paper On The number of images per sheet The number of images per sheet Pics Sheet is selectable only when Submenu 2 Application Print This prints the image selected in Step 6 All Print This prints all images stored in the internal memory or card Multi Print This prints one image in a multiple layout format All Index This prints an index of all images stored in the internal memory or card Print Order This prints images based on the print reservation data on the card Print Order is available only when print reservations have been made Print Reservations DPOF p 54 4 Use A V to select Si
30. ard again to increase the fast forward speed Press lt to rewind The speed Rewind at which the recording rewinds increases each time lt is pressed Adjusting the volume Use A V to adjust the volume Operations while playback is paused Elapsed time Total shooting time During pause Cueing Use A to display the first frame and press V to display the last frame Advancing and rewinding one frame at a time Press gt or lt to advance or rewind one frame at a time Hold D or lt pressed for continuous advance or rewind Resuming playback Press the button to resume playback To stop movie playback Press the MENU button To play back movies on the computer the included PC software is recommended For the first use of the PC software connect the camera to the computer then launch the software EN 21 Erasing images during playback Single image erase 1 Display the image you want to erase and press V D F tad MENU 4 30 2 Press A V to select Erase and press the button Multiple images or all images can be erased at a time p 41 22 EN Index view and close up view Index view enables quick selection of a desired image Close up view up to 10x magnification allows checking of image details 1 Turn the zoom lever O Single image view Close up view i 12 02 26 o Index view 42102 126 12 30 To se
31. assurance standards for warranty or any other repairs and ii make any internal or external design and or feature changes on or to its products without any liability to incorporate such changes on or to the Products WHAT IS NOT COVERED BY THIS LIMITED WARRANTY Excluded from this limited warranty and not warranted by Olympus in any fashion either express implied or by statute are a products and accessories not manufactured by Olympus and or not bearing the OLYMPUS brand label the warranty coverage for products and accessories of other manufacturers which may be distributed by Olympus is the responsibility of the manufacturers of such products and accessories in accordance with the terms and duration of such manufacturers warranties any Product which has been disassembled repaired tampered with altered changed or modified by persons other than Olympus s own authorized service personnel unless repair by others is made with the written consent of Olympus defects or damage to the Products resulting from wear tear misuse abuse negligence sand liquids impact improper storage nonperformance of scheduled operator and maintenance items battery leakage use of non OLYMPUS brand accessories consumables or supplies or use of the Products in combination with non compatible devices d software programs e supplies and consumables including but not limited to lamps ink paper film
32. aterials or software or for damages resulting from the use of the information contained therein Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice FCC Notice Radio and Television Interference Changes or modifications not expressly approved by the manufacturer may void the user s authority to operate this equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Adjust or relocate the receiving antenna e Increase the distance between the camera and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult your dealer or an experienced radio TV technic
33. button as the time signal strikes 00 seconds To change the date and time adjust the setting from the menu D Date time p 50 5 Use lt D to select the f time zone and then press the button e Use A V to turn daylight saving time Summer on or off f 12 02 26 12 30 gt be The menus can be used to change the selected time zone World Time p 50 EN 15 Shooting Playback and Erasing Shooting with the optimum aperture value and shutter speed P mode In this mode automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions such as exposure compensation white balance etc as needed The default settings of the function are highlighted in 1 Remove the lens cap 2 Set the mode dial to P 3 Press the ON OFF button to turn on the camera P mode indicator Number of storable still pictures p 63 Monitor standby mode screen 16 EN 4 Hold the camera and compose the shot When holding the camera take care not to cover the flash microphone and AF illuminator with your fingers etc 5 Press the shutter button halfway down to focus on the subject e When the camera focuses on the subject the exposure is locked shutter speed and aperture value are displayed and the AF target mark changes to green e The camera was unable to focus if the AF target mark flashes red Try focusing again AF target
34. center Do not try to remove the battery by force Damage to the battery exterior scratches etc may produce heat or an explosion A WARNING Keep batteries dry at all times To prevent batteries from leaking overheating or causing a fire or explosion use only batteries recommended for use with this product e Insert the battery carefully as described in the operating instructions If rechargeable batteries have not been recharged within the specified time stop charging them and do not use them Do not use a battery if it is cracked or broken lf a battery leaks becomes discolored or deformed or becomes abnormal in any other way during operation stop using the camera Ifa battery leaks fluid onto your clothing or skin remove the clothing and flush the affected area with clean running cold water immediately If the fluid burns your skin seek medical attention immediately Never subject batteries to strong shocks or continuous vibration A CAUTION Before loading always inspect the battery carefully for leaks discoloration warping or any other abnormality The battery may become hot during prolonged use To avoid minor burns do not remove it immediately after using the camera Always unload the battery from the camera before storing the camera for a long period Caution for Usage Environment To protect the high precision technology contained in this product never leave the camera in the places
35. cture data Disclaimer of Warranty Olympus makes no representations or warranties either expressed or implied by or concerning any content of these written materials or software and in no event shall be liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential incidental or indirect damages including but not limited to damages for loss of business profits business interruption and loss of business information arising from the use or inability to use these written materials or software or equipment Some countries do not allow the exclusion or limitation of liability for consequential or incidental damages or of the implied warranty so the above limitations may not apply to you Olympus reserves all rights to this manual Warning Unauthorized photographing or use of copyrighted material may violate applicable copyright laws Olympus assumes no responsibility for unauthorized photographing use or other acts that infringe upon the rights of copyright owners Copyright Notice All rights reserved No part of these written materials or this software may be reproduced or used in any form or by any means electronic or mechanical including photocopying and recording or the use of any type of information storage and retrieval system without the prior written permission of Olympus No liability is assumed with respect to the use of the information contained in these written m
36. d During the conditions described below power is consumed continuously and the battery becomes exhausted quickly The zoom is used repeatedly The shutter button is pressed halfway repeatedly in shooting mode activating the auto focus A picture is displayed on the monitor for an extended period of time The camera is connected to a printer Using an exhausted battery may cause the camera to turn off without displaying the battery level warning The included USB AC adapter F 2AC is designed to be used only with this camera Other cameras cannot be charged with this USB AC adapter Do not connect the included USB AC adapter F 2AC to equipment other than this camera For plug in type USB AC adapter The included USB AC adapter F 2AC is intended to be correctly orientated in a vertical or floor mount position Using a separately sold USB AC adapter The USB AC adapter F 3AC sold separately can be used with this camera Do not use any USB AC adapter other than the dedicated one When using F 3AC be sure to use the USB cable included with this camera Do not use any other USB AC adapter with this camera EN 61 Using a separately sold charger A charger UC 50 sold separately can be used to charge the battery Using your charger and USB AC adapter abroad The charger and USB AC adapter can be used in most home electrical sources within the range of 100 V to 240 V AC 50 60Hz around the world Howe
37. d free of charge To claim under this warranty the customer must take the product before the end of the applicable national warranty period to the dealer where the product was purchased or any other Olympus service station within the business area of Olympus Europa Holding GmbH as stipulated on the website http www olympus com During the one year period of the World Wide Guarantee the customer may turn the product in at any Olympus service station Please notice that not in all countries such Olympus service station exists The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product 70 EN N Provisions of Guarantee 1 OLYMPUS IMAGING CORP Shinjuku Monolith 2 3 1 Nishi Shinjuku Shinjuku ku Tokyo 163 0914 Japan grants a one year World Wide Guarantee This worldwide Guarantee must be presented at an Olympus authorized repair service station before any repair can be made under conditions of this Guarantee This Guarantee is valid only if the Guarantee Certificate and proof of purchase are presented at the Olympus repair service station Please note that this Guarantee is in addition to and does not affect the customer s legal warranty rights under the applicable national legislation governing the sale of consumer goods mentioned above 2 This Guarantee does not cover the following and the customer will be
38. d submenu 2 and then press the button e Once a setting is selected the display returns to the Submenu 1 There may be additional operations Menu Settings p 35 to 50 Pixel Mapping c English Y World Time 5 press the MENU button to complete the setting EN Menu Index Flash Macro ape Self timer p 30 Exposure compensation p White balance p 31 ISO Drive Image Size ail gy Camera Menu 1 p 35 Reset Compression Shadow Adjust AF Mode ESP e Digital Zoom Image Stabilizer 10 EN Camera Menu 1 CDADOOO a Camera Menu 2 p 37 AF Illuminat Rec View Pic Orientation Icon Guide Date Stamp D Q Movie Menu p 39 Image Size IS Movie Mode W Movie sound recording 2 S Playback Menu p 40 Slideshow Edit Erase Print Order 6 Protect Rotate Upload Order Reset Compression Shadow Adjust Auto AF Mode EsP Digital Zoom Off Image Stabilizer On ER MENU Normal Face iESP ESP f Settings Menu 1 p 44 Memory Format Format Backup Eye Fi USB Connection E Power On Sound Settings File Name p Settings Menu 2 p 47 Pixel Mapping IQ Monitor TV Out Power Save J Language Date time World Time 45 f Settings Menu 3 p 50 Beauty Settings Preparing the Camera Inserting the ba
39. e balance option amp suited to the scene Using the one touch white balance Select the white balance option in the function menu EN 31 Use lt P to select Gul or Lol and face the camera toward white paper e Set the paper to fill the entire screen and make sure that there is no shadow area e Perform this procedure under the light where the pictures are actually taken Press the MENU button e The camera releases the shutter and the white balance is registered e The registered white balance is stored in the camera The data will not be cleared by turning off the power e When the Sy or S whose white balance has already been registered is selected in Step new white balance will be registered J When the white area is not large enough or when the color is too bright too dark or loud the white balance cannot be registered Return to Step 2 Or set the other white balance Selecting the ISO sensitivity 1 Select the ISO setting option in the function menu 2 Use ID to select the setting option and press the amp button to set 32 EN Option Description The camera automatically adjusts the sensitivity according to the shooting scene ISO Auto The camera uses a higher sensitivity compared to ISO Auto to minimize blur caused by a moving subject or by camera shake The ISO sensitivity is fixed to the selected value High ISO Auto Value In the
40. e liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential incidental or indirect damages including but not limited to damages for loss of business profits business interruption and loss of business information arising from the use of inability to use these written materials or software Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the above limitations may not apply to you Trademarks IBM is a registered trademark of International Business Machines Corporation e Microsoft and Windows are registered trademarks of Microsoft Corporation Macintosh is a trademark of Apple Inc The SDHC SDXC logo is a trademark e Eye Fi is a registered trademark of Eye Fi Inc All other company and product names are registered trademarks and or trademarks of their respective owners The standards for camera file systems referred to in this manual are the Design rule for Camera File system DCF standards stipulated by the Japan Electronics and Information Technology Industries Association JEITA 72 EN THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO i ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD AVC VIDEO AND OR ii DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS
41. e magnification ratio changes depending on the image size setting On selected for Digital Zoom Zoom bar w T s 14M A Digital zoom range Image size w DA OO The magnification ratio changes depending on the image size setting Digital zoom range Other If Image Size is less than the full resolution after reaching the maximum optical zoom the camera will automatically resize and crop the image to the selected Image Size then enter the digital zoom range if Digital Zoom is On Photographs taken with the zoom bar displayed in red may appear grainy Using the flash 3 Use ID to select the setting option and The flash functions can be selected to best match the press the button to set shooting conditions Option Description 1 Lift up the flash unit manually The flash fires automatically in low Flash Auto light or backlight conditions Pre flashes are emitted to reduce Redeye the occurrence of red eye in your photos The flash fires regardless of the Fill In A available light Flash Off The flash does not fire Changing the shooting information lispli To turn off the flash display Press the flash down back into the camera The display of the screen information can be changed to 3 F 5 best match the situation for example the need for a clear 2 Select the flash option in the function menu view of the
42. e may become vague resulting in a playback mode failure or damage to the monitor Astrip of light may appear on the top bottom of the monitor but this is not a malfunction When a subject is viewed diagonally in the camera the edges may appear zigzagged on the monitor This is not a malfunction it will be less noticeable in playback mode In places subject to low temperatures the monitor may take a long time to turn on or its color may change temporarily When using the camera in extremely cold places it is a good idea to occasionally place it in a warm place The monitor exhibiting poor performance due to low temperatures will recover in normal temperatures The monitor of this product is manufactured with high quality accuracy however there may be a stuck or dead pixel on the monitor These pixels do not have any influence on the image to be saved Because of the characteristics the unevenness of the color or brightness may also be found depending on the angle but this is due to the structure of the monitor This is not a malfunction Legal and Other Notices Olympus makes no representations or warranties regarding any damages or benefit expected by using this unit lawfully or any request from a third person which are caused by the inappropriate use of this product Olympus makes no representations or warranties regarding any damages or any benefit expected by using this unit lawfully which are caused by erasing pi
43. ects on the review screen then press the button to start the retouch process and save e Settings for Beauty Fix can be registered EN 29 Using Shooting Functions Using the Menu p 8 Shooting closeups Macro shooting This function enables the camera to focus and shoot subjects at close distances 1 Select the macro option in the function menu Dunn 2 Use ID to select the setting option and press the amp button to set Option Description Off Macro mode is deactivated You can shoot the image at a closer Macro range 30 cm 11 8 in 220 cm 86 6 in This enables shooting as close as 3 Super Macro 1 cm 0 4 in to the subject 1 When the zoom is at the widest W position 2 When the zoom is at the most telephoto T position 3 The zoom is automatically fixed The flash p 19 and zoom p 18 cannot be set when Ws Super Macro is selected 30 EN Using the self timer After the shutter button is pressed all the way down the picture is taken after a short delay 1 Select the self timer option in the function menu 2 Use lt D to select the setting option and press the button to set Option Off Description The self timer is deactivated The self timer lamp turns on for approx 10 seconds then blinks for approx 2 seconds and then the picture is taken X 12 sec The self timer lamp blinks for approx 2sec 2 sec
44. ed operation For customers in CANADA This Class B digital apparatus complies with Canadian ICES 003 OLYMPUS WORLDWIDE LIMITED WARRANTY IMAGING PRODUCTS Olympus warrants that the enclosed Olympus imaging product s and related Olympus accessories individually a Product and collectively the Products will be free from defects in materials and workmanship under normal use and service for a period of one 1 year from the date of purchase If any Product proves to be defective within the one year warranty period the customer must return the defective Product to any of Olympus Service Centers following the procedure set forth below See WHAT TO DO WHEN SERVICE IS NEEDED 68 EN Olympus at its sole discretion will repair replace or adjust the defective Product provided that Olympus investigation and factory inspection disclose that a such defect developed under normal and proper use and b the Product is covered under this limited warranty Repair replacement or adjustment of defective Products shall be Olympus s sole obligation and the customer s sole remedy hereunder The customer is liable and shall pay for shipment of the Products to the Olympus Service Center Olympus shall not be obligated to perform preventive maintenance installation deinstallation or maintenance Olympus reserves the right to i use reconditioned refurbished and or serviceable used parts that meet Olympus s quality
45. emory Submenu 2 Application Completely erases the image data Yes in the internal memory or card including protected images No Cancels formatting Copying images in the internal memory to the card Backup f Settings Menu 1 Backup Submenu 2 Application Ye Backs up image data in the internal es memory to the card No Cancels the backup 44 EN Using an Eye Fi card Eye Fi f Settings Menu 1 gt Eye Fi Submenu 2 Application Off Disable Eye Fi communication On Enable Eye Fi communication When using an Eye Fi card read the Eye Fi card instruction manual carefully and comply with the instructions Use the Eye Fi card in compliance with the laws and regulations of the country where the camera is used e In locations such as on an airplane where the Eye Fi communication is prohibited remove the Eye Fi card from the camera or set Eye Fi to Off This camera does not support the Eye Fi card s Endless mode Selecting a method for connecting the camera to other devices USB Connection f Settings Menu 1 gt USB Connection Turning on the camera with the gt button gt Power On Y Settings Menu 1 gt gt Power On Submenu 2 Application Submenu 2 Application The camera is not turned on To turn When the camera is connected to No on the camera press the ON OFF Auto another device the settings selection button sc
46. enting with different settings This is especially true for sunshade under a Clear sky mixed natural and artificial light settings and so on Taking sharper pictures e Taking pictures with the optical zoom Avoid using digital zoom p 36 to take pictures e Taking pictures at a low ISO sensitivity If the picture is taken with a high ISO sensitivity noise small colored spots and color unevenness that were not in the original image can occur and the image can appear grainy Selecting the ISO sensitivity p 32 EN 59 Sa Playback Editing tips Taking pictures so that the frames are stitched Playback smoothly e Atip for panoramic shooting Taking pictures by pivoting with the camera at the center prevents shifting of the image When taking pictures of close objects in particular pivoting with Playing images in the internal memory and card e Remove the card and display the images in internal memory the lens end at the center produces favorable e Inserting the battery and card p 11 results Viewing images with high picture quality on a high Panorama p 26 definition TV gt e Connect the camera to the TV using an HDMI Batteries L J cable sold separately e Playing back images on a TV p 47 Making batteries last longer e Set Power Save p 49 to On Editing Erasing the sound recorded to a still image e Record over the sound with silence when playi
47. entium 4 1 3 GHz or better Core 2 Duo 2 13 GHz or better required for movies RAM 1 GB or more 2 GB or more recommended Free Hard 1 GB or more Drive Space Monitor 1024 x 768 pixels or more Minimum 65 536 colors 16 770 000 Settings colors recommended EN 13 ib 2 Install OLYMPUS Viewer 2 Operating Windows XP Service Pack 2 or later Check the system requirements before beginning System Windows Vista Windows 7 installation Pentium 4 1 3 GHz or better i e Click the OLYMPUS Viewer 2 button and follow Processor Core 2 Duo 2 13 GHz or better required the on screen instructions to install the software for movies You can register via Registration in OLYMPUS 512 MB or more 1 GB or more Viewer 2 Help recommended x RAM 1 GB or more required for movies 2 GB OLYMPUS Viewer 2 or more recommended Operating Mac OS X v10 4 11 v10 7 System FEN i Free Hard 1GB Drive Space Or more Processor Intel Core Solo Duo 1 5 GHz or better f 1024 x 768 pixels or more 1 GB or more 2 GB or more Monitor Minimum 65 536 colors 16 770 000 RAM recommended g colors recommended Free Hard y A minimum of 64 MB video RAM with Drive Space ESB oumote Graphics irectX 9 or lat DirectX 9 or later Monitor 1024 x 768 pixels or more See online help for information on using the software Settings Minimum 32 000 colors 16 770 000 4 Install the camera manual e Click the Camera
48. epeat Step 4 and then press the button when finished 6 Use A V to select the date print screen option and press the button e The settings are applied to the remaining images with the print reservation data 7 Use A V to select Set and press the button EN 55 Usage Tips If the camera does not work as intended or if an error message is displayed on the screen and you are unsure of what to do refer to the information below to fix the problem s Troubleshooting Battery The camera does not work even when batteries are installed e Insert recharged batteries in the correct direction Inserting the battery and card p 11 Charging the battery with the included USB AC adapter p 12 e Battery performance may have been reduced temporarily due to low temperature Take the batteries out of the camera and warm them by putting them in your pocket for a while Card Internal memory An error message is displayed Error message p 57 Shutter button No picture is taken when the shutter button is pressed e Cancel sleep mode To save battery power the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on No picture is taken even if the shutter button is fully pressed in this mode Operate the zoom lever or other buttons to restore the camera from sleep mode before taking a picture I
49. era Menu 1 gt Digital Zoom Submenu 2 Application off Disable digital zoom On Enable digital zoom Digital Zoom is not available when Ws Super Macro p 30 is selected The option selected for Digital Zoom affects the appearance of the zoom bar To take larger images p 18 Reducing the blur caused by the camera shake when shooting Image Stabilizer still images IS Movie Mode movies Camera Menu 1 gt Image Stabilizer still images D Movie Menu gt IS Movie Mode movies Submenu 2 Application Using the assist lamp for shooting a dark subject AF Illuminat Camera Menu 2 gt AF Illuminat Submenu 2 Application Off The AF illuminator is not used When the shutter button is pressed On halfway down the AF illuminator turns on to aid focusing The image stabilizer is deactivated This is recommended for shooting when the camera is fixed in place on a tripod or other stable surface Off On The image stabilizer is activated There may be a noise coming from inside the camera when the shutter button is pressed with Image Stabilizer still images set to On Images may not be stabilized if camera shake is too severe When the shutter speed is extremely slow such as when taking pictures at night Image Stabilizer still images may not be as effective AF illuminator fowMmPpuS A MEUS A D
50. ess A V IP to scroll the image in the direction of the pressed button Pause Press the button Restart scrolling Press the button Stop playback Press the MENU button 34 EN Playing back 3D images 3D images shot with this camera can be played back on 3D compatible devices connected to this camera using an HDMI cable sold separately Shooting 3D images 3D mode p 28 When playing back 3D images read the warnings in the instruction manual for the 3D compatible devices carefully Connect the 3D compatible device and camera using the HDMI cable For the connection and setting method see Connection via HDMI cable p 48 N oO Use A V to select 3D Show and then press the amp button 3 Use A V lt to select the 3D image to play back and then press the button To start a slideshow press the MENU button To stop the slideshow press the MENU or button 3D images are composed of JPEG files and MPO files If any files are deleted on a computer playback of 3D images may not be possible Menus for Shooting Functions The default settings of the function are highlighted in For information on using the menus see Using the Menu p 8 Restoring the shooting functions to the default settings Reset CI Camera Menu 1 gt Reset Submenu 2 Application Restores the following menu functions to the default settings Flash p 19 Macro p 3
51. f the camera is left for another 12 minutes it automatically turns off Press the ON OFF button to turn the camera on e Press the gt button to switch to the shooting mode e Wait until flash charge stops blinking before taking pictures 56 EN e With prolonged camera use the internal temperature may increase resulting in automatic shutdown If this occurs remove the battery from the camera and wait until the camera has sufficiently cooled The camera s external temperature may also increase during use however this is normal and does not indicate malfunction Monitor Difficult to see e Condensation may have occurred Turn off the power and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures The light is caught in the picture e Shooting with flash in dark situations results in an image with many flash reflections on dust in the air Date and time function Date and time settings return to the default setting e If the batteries are removed and left out of the camera for about 3 days the date and time settings return to the default setting and must be reset The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded Language date time and time zone p 15 Miscellaneous The camera makes a noise when taking pictures e The camera may activate
52. frame is taken the camera automatically processes the frames and the combined panorama image is displayed To exit the panorama function without saving an image press the MENU button Taking pictures with PC Use AV Id to select the direction that the frames are combined Press the shutter button to take the first frame and then point the camera for the second frame The shooting procedure is same as that of Manual Panorama shooting is possible for up to 10 frames Repeat Step until the number of desired frames is taken and then press the button or MENU button when finished Refer to the PC software help guide for details on how to make panorama images EN 27 Shooting 3D images 3D mode In this mode 3D images are shot for viewing on 3D compatible display devices Images shot in 3D mode cannot be displayed in 3D on this camera s monitor 1 Set the shooting mode to 3D 2 Press lt to display the function menu 3 Use lt P to select Auto or Manual and then press the button to set Submenu 1 Description The user only composes the shots so that the target marks and pointers overlap and the camera automatically releases the shutter Auto After shooting the first frame move the camera to overlap the subject with the image in the monitor Then manually release the shutter Manual Depending on the subject or the situation if the distance between t
53. ges displayed on the Off Cancels Power Save guag monitors Sacred y When the camera is not being used for approx 10 seconds the monitor automatically turns off to save battery power On To resume standby mode Press any button EN 49 Setting the date and time D f Settings Menu 2 gt Language date time and time zone p 15 To check the date and time Press the INFO button while the camera is turned off The current time is displayed for approx 3 seconds Choosing home and alternate time zones World Time f Settings Menu 2 amp World Time You will not be able to select a time zone using World Time if the camera clock has not first been set using DI Submenu2 Submenu 3 Application The time in the home PN time zone the time zone selected for f in submenu 2 Home Alternate The time in the travel gt destination time zone the time zone selected for in submenu 2 te Select the home time zone ft Select the travel destination time zone 2 In areas where daylight saving time is in effect use AV to turn daylight saving time Summer on 2 When you select a time zone the camera automatically calculates the time difference between the selected zone and the home time zone f to display the time in the travel destination time zone 50 EN Registering the settings for Beauty Fix Beauty Settings
54. ghtness FAF Taking pictures with the right brightness e Taking pictures of a subject against a backlight Faces or backgrounds are bright even when shot against backlight Shadow Adjust p 35 e Taking pictures using Face iESP p 36 Appropriate exposure is obtained for a face against backlight and the face is brightened e Taking pictures using C for ESP Ce p 36 Brightness is matched with a subject in the center of the screen and the image is not affected by background light e Taking pictures using Fill In p 19 flash A subject against backlight is brightened e Taking pictures of a white beach or snow scene Set the mode to F Beach amp Snow p 24 Image quality e Taking pictures using exposure compensation p 31 Adjust the brightness while viewing the screen for taking the picture Normally taking pictures of white subjects such as snow results in images that are darker than the actual subject Use the exposure compensation to adjust in the positive direction to express whites as they appear When taking pictures of black subjects on the other hand it is effective to adjust in the negative direction Color hue i gt Taking pictures with colors at the same shade as they appear e Taking pictures by selecting white balance p 31 Best results in most environments can normally be obtained with the WB Auto setting but for some subjects you should try experim
55. he camera and subject is too short the image may not look 3D The 3D viewing angle varies depending on the subject etc To exit 3D shooting mode without saving an image press the MENU button 28 EN The Image Size p 33 is fixed to HI The zoom ratio is fixed The focus exposure and the white balance are fixed when the first image is taken The flash is fixed to Flash Off Shooting with Beauty Fix effects BEAUTY mode Depending on the picture the editing may not be effective 1 Set the shooting mode to BEAUTY Pk yy Sauls fm Ni 3 Use lt D to select the retouching setting and press the button to set Retouching setting e Set 1 Set 2 or Set 3 retouches the image according to the Beauty Settings Beauty Settings p 50 4 Point the camera toward the subject Check the frameappearing around the face detected by the camera and then press the shutter button to take the picture The unedited image and edited image are both saved If the image cannot be retouched only the unedited image is saved The Image Size p 33 of the retouched image is limited to MI or lower 5 Select OK or Beauty Fix on the review screen and press the button to save or to retouch the image additionally e Beauty Fix Use AV lt D to select a retouching item and press the button Eye Color lt gt es Check the retouched eff
56. he nearest service center INTERNATIONAL WARRANTY SERVICE International warranty service is available under this warranty EN 69 For customers in Europe CE mark indicates that this product complies with the European requirements for safety health environment and customer protection CE mark cameras are intended for sales in Europe This symbol crossed out wheeled bin WEEE Annex IV indicates separate collection of waste electrical and electronic equipment in the EU countries Please do not throw the equipment into the domestic refuse La Please use the return and collection systems available in your country for the disposal of this product This symbol crossed out wheeled bin Directive 2006 66 EC Annex II indicates separate collection of waste batteries in the EU countries Please do not throw the batteries into the domestic refuse Please use the return and collection systems available in your country for the disposal of the waste batteries Provisions of warranty 1 If this product proves to be defective although it has been used properly in accordance with the written Handling Care and Operating instructions supplied with it during the applicable national warranty period and has been purchased from an authorized Olympus distributor within the business area of Olympus Europa Holding GmbH as stipulated on the website http Awww olympus com this product will be repaired or at Olympus s option replace
57. ian for help Only the OLYMPUS supplied USB cable should be used to connect the camera to USB enabled personal computers PC Any unauthorized changes or modifications to this equipment would void the user s authority to operate it EN 67 Use Only Dedicated Rechargeable Battery Battery Charger and USB AC adapter We strongly recommend that you use only the genuine Olympus dedicated rechargeable battery battery charger and USB AC adapter with this camera Using a non genuine rechargeable battery battery charger and or USB AC adapter may result in fire or personal injury due to leakage heating ignition or damage to the battery Olympus does not assume any liability for accidents or damage that may result from the use of a battery battery charger and or USB AC adapter that are not genuine Olympus accessories For customers in North and South America For customers in USA Declaration of Conformity Model Number SP 720UZ Trade Name OLYMPUS Responsible Party OLYMPUS IMAGING AMERICA INC 3500 Corporate Parkway P O Box 610 Center Valley PA 18034 0610 U S A Telephone Number 484 896 5000 Address Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesir
58. ic Breeze BGM Mellow Selects the background music options Dreamy Urban Selects the type of Type Norma transition effect used Fader Zoom f between slides Start Starts the slideshow M D During a slideshow press D to advance one frame lt to go back one frame Changing the image size Ma Playback Menu gt Edit gt Bud Submenu 3 Application VGA 640x480 as a separate image with a smaller size for use in e mail attachments and other applications GA 320x240 This saves a high resolution image Use IP to select an image Use A V to select an image size and press the button e The resized image is saved as a separate image 40 EN Cropping image FF Playback Menu gt Edit gt pt Use lt I gt to select an image and press the button Use the zoom lever to select the size of the cropping frame and use A V IP to move the frame Cropping frame Press the button after you have selected the area to trim e The edited image is saved as a separate image Adding sound to still images 8 Playback Menu gt Edit gt amp Use lt I gt to select an image Aim the microphone toward the sound source Microphone Press the button e Recording starts e The camera adds records sound for approx 4 seconds while playing back the image Retouching faces on still images Beauty Fix Playbac
59. ightness while viewing the screen and then press the button Submenu 2 Submenu 3 Application NTSC Connecting the camera to a TV in North America Taiwan Korea Japan NTSC PAL and so on PAL Connecting the camera to a TV in European countries China and so on HDMI Out oe Set the signal format to be given priority If the TV setting does not match Toe it is changed automatically aM Comieal Off Operate with the camera ontrol On Operate with the TV remote control o amp The factory default settings differ according to the region where the camera is sold EN 47 To play back camera images on a TV e Connection via AV cable Use the camera to select the same video signal system as the one of connected TV NTSC PAL Connect the TV and camera Connect to the TV video input jack yellow and audio input Multi connector jack white Open the connector cover in AV cable supplied the direction of the arrow e Connection via HDMI cable On the camera select the digital signal format that will be connected 480p 576p 720p 1080i Connect the TV and camera Turn on the TV and change INPUT to VIDEO an input jack connected to the camera Turn on the camera and use A V IP to select the image for playback The TV video signal system varies depending on the countries and regions Before viewing camera images on your TV select the video output according t
60. ill be erased Sel Image Images are individually selected and erased Erase Deletes the image displayed EN 41 When erasing pictures in the internal memory do not insert the card into the camera Protected images cannot be erased To individually select and erase images Sel Image Use A V to select Sel Image and press the button Use IP to select the image to be erased and press the button to add a NY mark to the image e Turn the zoom lever to the W end to display an index view Images can be quickly selected using the A V lt I gt buttons Turn to the T end to return to the single frame display V mark Peer MENU O Repeat Step to select the images to be erased and then press the MENU button to erase the selected images Use A V to select Yes and press the button e The images with a V mark are erased To erase all images All Erase Use A V to select All Erase and press the button Use A V to select Yes and press the button 42 EN Saving print settings to the image data Print Order Playback Menu Print Order Print reservations DPOF p 54 Print reservation can be set only for still images that are recorded to the card Protecting images di Playback Menu gt 5 Protected images cannot be erased by Erase p 22 41 Sel Image p 42 or All Erase p 42 but all images are erased by Memor
61. ing numbering Month 1 to C A October B November Pmi C December Day 01 to 31 46 EN Submenu 2 Application This resets the sequential number for the folder name and file name Reset whenever a new card is inserted This is useful when grouping images on separate cards Even when a new card is inserted this continues the numbering for the folder name and file name from Auto the previous card This is useful for managing all image folder names and files names with sequential numbers The number for the folder name is reset to 100 and the one for the file name is reset to 0001 Adjusting the image processing function Pixel Mapping f Settings Menu 2 gt Pixel Mapping 7 e This function has already been adjusted at factory shipping and no adjustment is needed right after purchase Approximately once a year is recommended For best results wait at least one minute after taking or viewing pictures before performing pixel mapping If the camera is turned off during pixel mapping be sure to perform it again To adjust the image processing function Press the button when Start Submenu 2 is displayed e The check and adjustment of the image processing function starts Playing back images on a TV TV Out f Settings Menu 2 gt TV Out Adjusting the brightness of the monitor egy f Settings Menu 2 gt I0 To adjust the monitor brightness Use A V to adjust the br
62. it continuously e Taking a picture of subjects where autofocus is difficult In the following cases after focusing on an object by pressing the shutter button halfway down with high contrast at the same distance as the subject compose the shot and take the picture Subjects with low contrast When extremely bright objects appear in the center of the screen 58 EN Object with no vertical lines It is also effective to compose the shot by holding the camera vertically to focus and then returning to the horizontal position to take the picture When objects are at different distances Fast moving object The subject is not in the center of the frame bk Camera shake Taking pictures without camera shake e Taking pictures using Image Stabilizer p 37 The image pickup device shifts to correct for camera shake even if the ISO sensitivity is not increased This function is also effective when taking pictures at a high zoom magnification Shooting movies using IS Movie Mode p 37 Select N Sport in the scene mode p 24 The N Sport mode uses a fast shutter speed and can reduce the blur incurred by a moving subject e Taking pictures at a high ISO sensitivity If a high ISO sensitivity is selected pictures can be taken at a high shutter speed even at locations where a flash cannot be used Selecting the ISO sensitivity p 32 Exposure bri
63. k Menu amp Edit gt Beauty Fix Depending on the picture the editing may not be effective Use JP to select an image and press the button Use AV to select a retouching item and press the button Select OK or Beauty Fix on the review screen and press the button to save or to retouch the image additionally e The retouched image is saved as a separate image The Image Size p 33 of the retouched image is limited to MI or lower Beauty Fix Select a retouching item and press the button Eye Color lt gt 5 wo Press the button on the review screen Brightening areas that are dark due to backlight or other reasons Shadow Adj D Playback Menu amp Edit gt Shadow Adj Use lt I gt to select an image and press the button e The edited image is saved as a separate image Depending on the picture the editing may not be effective The retouching process may lower the image resolution Retouching red eyes in flash shooting Redeye Fix D Playback Menu gt Edit gt Redeye Fix Use lt I gt to select an image and press the button e The edited image is saved as a separate image Depending on the picture the editing may not be effective The retouching process may lower the image resolution Erasing images Erase Playback Menu gt Erase Submenu 2 Application All Erase All images in the internal memory or card w
64. lect an image in index view Use A V lt D to select an image and press the button to display the selected image in single image view To scroll an image in close up view Use A V lt D to move the viewing area Changing the image information display Shooting information settings displayed on the screen can be changed 1 Press A INFO e The displayed image information changes in the order shown below each time the button is pressed Normal weed Pawo K No information Detailed BDA ED d x10 B430 MAGIC aah TN AH000 F32 20 aA o na fu 100 0004 12 02 26 12 30 EN 23 Using Shooting Modes To change the shooting mode Turn the mode dial to select the shooting mode P iAUTO SCN MAGIC M 3D BEAUTY Mode dial p 6 Shooting with automatic settings iAUTO mode The camera will automatically select the optimal shooting mode for the scene The shooting condition is decided by the camera and settings cannot be changed excepting some functions 1 Set the shooting mode to iAUTO The icon changes depending on the scene that the camera automatically selects In some cases the camera may not select the desired shooting mode When the camera cannot identify the optimal mode P mode will be selected 24 EN Using the best mode for the shooting scene SCN mode 1 Set the shooting mode to SCN 2 Press lt to display the function menu E
65. mory problem Printer problem Use A V to select Memory ch Turn off the camera and printer n Format and press the button Print Error check the printer for any problems and then turn the power on again No Picture Internal memory Card problem Take pictures before viewing them CI Cannot Print Problem with selected image Use a computer to print CI Picture Error Problem with selected image Use photo retouch software etc to view the image on a computer If the image still cannot be viewed the image file is corrupted computer Before erasing important images download them to a 2 All data will be erased 3 This is displayed for instance when the printer s paper tray has been removed Do not operate the printer while making the print settings on the camera other cameras 4 This camera may be unable to print images taken by EN 57 Shooting tips When you are unsure of how to take a picture that you envision refer to the information below Focusing Le l Focusing on the subject e Taking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject compose the shot and take the picture Pressing the shutter button halfway p 16 Set AF Mode p 36 to Face iESP Taking a picture in AF Tracking mode p 36 The camera tracks the subject movement automatically to focus on
66. ng back the image Adding sound to still images amp p 40 60 EN Appendix Camera care Exterior Wipe gently with a soft cloth If the camera is very dirty soak the cloth in mild soapy water and wring well Wipe the camera with the damp cloth and then dry it with a dry cloth If you have used the camera at the beach use a cloth soaked in clean water and wrung well Monitor Wipe gently with a soft cloth Lens Blow dust off the lens with a commercial blower then wipe gently with a lens cleaner Do not use strong solvents such as benzene or alcohol or chemically treated cloth Mold may form on the lens surface if the lens is left dirty Battery USB AC adapter Wipe gently with a soft dry cloth Storage When storing the camera for extended periods remove the battery USB AC adapter and card and keep in a cool dry place that is well ventilated Periodically insert the battery and test the camera functions Avoid leaving the camera in places where chemical products are handled since this may result in corrosion Battery and USB AC adapter This camera uses one Olympus lithium ion battery LI 50B No other type of batteries can be used Caution There is a risk of explosion if the battery is replaced with the incorrect battery type Dispose of the used battery following the instructions p 66 Power consumption by the camera varies depending on which functions are use
67. o the camera contact an authorized distributor or service center Do not try to remove the card by force If you find that the USB AC adapter is extremely hot or notice any unusual odors noise or smoke around it unplug the power plug from wall outlet immediately and stop using it Then contact an authorized distributor or service center A CAUTION Stop using the camera immediately if you notice any unusual odors noise or smoke around it Never remove the batteries with bare hands which may cause a fire or burn your hands Never hold or operate the camera with wet hands Do not leave the camera in places where it may be subject to extremely high temperatures Doing so may cause parts to deteriorate and in some circumstances cause the camera to catch fire Do not use the charger or USB AC adapter if it is covered such as a blanket This could cause overheating resulting in fire Handle the camera with care to avoid getting a low temperature burn When the camera contains metal parts overheating can result in a low temperature burn Pay attention to the following When used for a long period the camera will get hot If you hold on to the camera in this state a low temperature burn may be caused e In places subject to extremely cold temperatures the temperature of the camera s body may be lower than the environmental temperature If possible wear gloves when handling the camera in cold temperatures
68. o your TV s video signal type When the camera is connected to the computer by the USB cable do not connect the HDMI cable to the camera HDMI micro connector type D Connect to the HDMI connector on the TV Open the connector cover in the direction of the arrow a HDMI cable sold separately CB HD1 A 48 EN For details on changing the input source of the TV refer to the TV s instruction manual When the camera and TV are connected by both an AV cable and an HDMI cable the HDMI cable will take priority Depending on the TV s settings the displayed images and information may become cropped To operate images with the TV remote control Set HDMI Control to On and turn off the camera Connect the camera and TV with an HDMI cable Connection via HDMI cable p 48 First turn on the TV and then turn on the camera e Operate by following the operation guide that is displayed on the TV With some TVs operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen If operations cannot be performed with the TV remote control set HDMI Control to Off and operate using the camera Saving battery power between shots Changing the display language BI Power Save Settings Menu 2 gt D f Settings Menu 2 gt Power Save Submenu 2 Application Submenu 2 Application The language for the menus and Languages error messa
69. omated help Monday to Friday ET http www olympusamerica com support http olympusamerica com contactus Phone customer support Tel 1 888 553 4448 Toll free Olympus software updates can be obtained at http www olympusamerica com digital OLYMPUS EUROPA HOLDING GMBH Premises Wendenstrasse 14 18 20097 Hamburg Germany Goods delivery Bredowstrasse 20 22113 Hamburg Germany Tel 49 40 23 77 3 0 Fax 49 40 23 07 61 Letters Postfach 10 49 08 20034 Hamburg Germany European Technical Customer Support Please visit our homepage http www olympus europa com or call our TOLL FREE NUMBER 00800 67 10 83 00 for Austria Belgium Denmark Finland France Germany Italy Luxemburg Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom Please note some mobile phone services providers do not permit access or request an additional prefix to 800 numbers For all European Countries not listed and in case that you can t get connected to the above mentioned number please make use of the following CHARGED NUMBERS 49 180 5 67 10 83 or 49 40 237 73 4899 Our Technical Customer Support is available from 9 am to 6 pm MET Monday to Friday OLYMPUS IMAGING CHINA CO LTD Customer Support 400 650 0303 Homepage http www olympus com cn Customer Service Center ASF Ping An International Financial Center No 1 3 Rm 1605 1608 Guangzhou International Electronic tower No403 Xinyuan South Road Chaoyang District
70. on 8 If necessary repeat Steps 6 and 7 to select the image to be printed make the detailed settings and set Single Print 9 Press the button 10use AV to select Print and press the button e Printing starts e When Option Set is selected in All Print mode Print Info screen is displayed e When printing is finished the Print Mode Select screen is displayed Print Mode Select Multi Print All Index Print Order To cancel printing Press the MENU button while Do Not Remove USB Cable is displayed Select Cancel using A V and then press the button 1 1 Press the MENU button 12When the message Remove USB Cable is displayed disconnect the USB cable from the camera and printer EN 53 Print Reservations DPOF In print reservations the number of prints and date imprint option are saved in the image on the card This enables easy printing at a printer or print shop supporting DPOF by using only the print reservations on the card without a computer or a camera DPOF is a standard for storing automatic printout information from digital cameras Print reservations can be set only for the images stored on the card DPOF reservations set by another DPOF device cannot be changed by this camera Make changes using the original device Making new DPOF reservations with this camera will erase the reservations made by the other device DPOF print reservation
71. onds then the picture is taken When your pet cat or dog turns its head towards the camera its face is recognized and the picture is taken automatically Jho Auto Release 1 Auto Release is displayed only when the SCN mode is 86 or 49 To cancel the self timer after it starts 1 Select the white balance option in the Press the MENU button function menu Adjusting the brightness NFO CS WB WBAuto amw tor amp Exposure compensation The standard brightness appropriate exposure set by the v camera based on the shooting mode except for iAUTO can be adjusted brighter or darker to obtain a desired shot EE A S EA CO 1 Select the exposure compensation option in amp v the function menu nro D Ce 2 Use lt D to select the setting option and press the button to set Option Description The camera automatically adjusts WB Auto the white balance according to the shooting scene For shooting outdoors under a clear sky 2 Use lt I gt to select the desired brightness a For shooting outdoors under a and press the button cloudy sky 38 For shooting under tungsten lighting Adjusting to a natural color scheme White balance For shooting under white fluorescent lighting For setting the subtle shades of color that cannot be adjusted by Auto Sunny Cloudy Incandescent or Fluorescent For more natural coloring choose a whit
72. prints negatives cables and batteries and or f Products which do not contain a validly placed and recorded Olympus serial number unless they are a model on which Olympus does not place and record serial numbers b c EXCEPT FOR THE LIMITED WARRANTY SET FORTH ABOVE OLYMPUS MAKES NO AND DISCLAIMS ALL OTHER REPRESENTATIONS GUARANTIES CONDITIONS AND WARRANTIES CONCERNING THE PRODUCTS WHETHER DIRECT OR INDIRECT EXPRESS OR IMPLIED OR ARISING UNDER ANY STATUTE ORDINANCE COMMERCIAL USAGE OR OTHERWISE INCLUDING BUT NOT LIMITED TO ANY WARRANTY OR REPRESENTATION AS TO THE SUITABILITY DURABILITY DESIGN OPERATION OR CONDITON OF THE PRODUCTS OR ANY PART THEREOF OR THE MERCHANTABILITY OF THE PRODUCTS OR THEIR FITNESS FOR A PARTICULAR PURPOSE OR RELATING TO THE INFRINGEMENT OF ANY PATENT COPYRIGHT OR OTHER PROPRIETARY RIGHT USED OR INCLUDED THEREIN IF ANY IMPLIED WARRANTIES APPLY AS A MATTER OF LAW THEY ARE LIMITED IN DURATION TO THE LENGTH OF THIS LIMITED WARRANTY SOME STATES MAY NOT RECOGNIZE A DISCLAIMER OR LIMITATION OF WARRANTIES AND OR LIMITATION OF LIABILITY SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY THE CUSTOMER MAY ALSO HAVE DIFFERENT AND OR ADDITIONAL RIGHTS AND REMEDIES THAT VARY FROM STATE TO STATE THE CUSTOMER ACKNOWLEDGES AND AGREES THAT OLYMPUS SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES THAT THE CUSTOMER MAY INCUR FROM DELAYED SHIPMENT PRODUCT FAILURE PRODUCT DESIGN SELECTION OR PRODUCT
73. r for any loss resulting from delay in repair is excluded Notes 1 This Warranty is in addition to and does not affect the customer s statutory right 2 If you have any queries regarding this Warranty call any of the Olympus authorized service stations listed in the instructions Notes regarding warranty maintenance 1 This Warranty will only be valid if the Warranty Certificate is duly completed by Olympus or the dealer Make sure that your name the name of the dealer the serial number and the year month and date of purchase are all completed 2 Since this Warranty Certificate will not be re issued keep it in a safe place EN 71 3 Any request for repair by a customer in same country where the product was purchased shall be subject to the terms of the warranty issued by the Olympus distributor in that country Where the local Olympus distributor does not issue a separate warranty or where the customer is not in the country Where the product was purchased the terms of this worldwide warranty shall apply 4 Where applicable this Warranty is valid worldwide The Olympus authorized service stations listed in this Warranty will gladly honor it Please refer to the appended list for the authorized international Olympus service network Disclaimer of Warranty Olympus makes no representations or warranties either expressed or implied by or concerning any content if these written materials or software and in no event shall b
74. r card is being used during shooting and playback Current memory indicator Internal memory is being used HR Card is being used Even if Memory Format Format Erase Sel Image or All Erase is performed the data in the card is not completely erased When disposing of the card damage the card to prevent the disclosure of personal data Readout recording process of the card During shooting the current memory indicator lights up in red while the camera is writing data Never open the battery card cover or unplug the USB cable This can not only damage the image data but also render the internal memory or card unusable Number of storable pictures still images Continuous recording length movies in the internal memory and cards The figures in the following tables are quoted only as a rough guideline The actual number of storable pictures or continuous recording lengths will differ according to the shooting conditions and memory cards used The figures in the table below are the number of the storable pictures when using the internal memory formatted Memory Format Format p 44 Still pictures Image Size Compression Number of storable still pictures 2 5 Internal memory SD SDHC SDXC card 4GB IEM 4288x3216 Fike 1 564 Nan 3 1 094 Fite 3 950 Em 3264x2448 EA 250 Fike 5 1 495 EA 2560x1920 lt a 1495 Fike 7 2 229 EM 2048x1536 Ig 5 zen Fike 1
75. reen is displayed VaR Press and hold the gt button to turn Select when connecting the camera the camera on in the playback mode Storage P to a computer via a storage device Select when transferring images MTP without using the supplied ib PC software on Windows Vista Windows 7 Print Select when connecting to a PictBridge compatible printer System requirements Windows Windows XP Home Edition Professional SP1 or later Windows Vista Windows 7 Macintosh Mac OS X v10 3 or later When using another system other than Windows XP SP2 or later Windows Vista Windows 7 set to Storage Even if a computer has USB ports proper operation is not guaranteed in the following cases e Computers with USB ports installed using an expansion card etc e Computers without a factory installed OS and home built computers EN 45 Selecting the camera sound and its volume Sound Settings Settings Menu 1 gt Sound Settings Submenu 2 Submenu 3 Application Sound Type 4 213 Selects the camera sounds operation sounds shutter sound and warning sound Volume 0 1 2 3 4 5 Selects the operation volume of camera buttons E Volume 0 1 2 3 4 5 Selects the image playback volume Resetting the file names of pictures File Name f Settings Menu 1 gt File Name Folder name Folder name DCIM 1000LYMP a a File name Pmdd0001 jpg 9990LYMP Pmdd9999 jpg Automatic Automatic number
76. required to pay repair charge even for defects occurring within the Guarantee period referred to above a Any defect that occurs due to mishandling such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions etc b Any defect that occurs due to repair modification cleaning etc performed by anyone other than Olympus or an Olympus authorized service station c Any defect or damage that occurs due to transport a fall shock etc after purchase of the product d Any defect or damage that occurs due to fire earthquake flood damage thunderbolt other natural disasters environmental pollution and irregular voltage sources e Any defect that occurs due to careless or improper storage such as keeping the product under conditions of high temperature and humidity near insect repellents such as naphthalene or harmful drugs etc improper maintenance etc f Any defect that occurs due to exhausted batteries etc g Any defect that occurs due to sand mud etc entering the inside of the product casing h When the Guarantee Certificate is not returned with the product i When any alterations whatsoever are made to the Guarantee Certificate regarding the year month and date of purchase the customer s name the dealer s name and the serial number j When proof of purchase is not presented with this Guarantee Certificate 3 This Guarantee applies to the product only
77. s can be made for up to 999 images per card Single frame print reservations 1 1 Display the setup menu Setup menu p 9 2 From the playback menu gt select Print Order and then press the button 3 Use A V to select Dj and press the button Print Order ED Now 100 0004 42102126 12 30 54 EN 4 Use ID to select the image for print reservation Use A V to select the quantity Press the amp button 5 Use A V to select the date print screen option and press the button Submenu 2 Application No This prints the image only Date This prints the image with the shooting date Time This prints the image with the shooting time 6 Use AV to select Set and press the button Reserving one print each of all images on the card L4 1 Follow Steps 1 and 2 in 0 p 54 2 Use A V to select 11 and press the button 3 Follow Steps 5 and 6 in D1 Resetting all print reservation data 1 Follow Steps 1 and 2 in 0 p 54 2 Select either 0 or 4 and press the button 3 Use A V to select Reset and press the button Resetting the print reservation data for selected images 1 Follow Steps 1 and 2 in 0 p 54 2 Use A V to select D and press the button 3 Use A V to select Keep and press the button 4 Use D to select the image with the print reservation you want to cancel Use A V to set the print quantity to 0 If necessary r
78. service IN NO EVENT SHALL OLYMPUS BE RESPONSIBLE FOR SAVING KEEPING OR MAINTAINING ANY IMAGE OR DATA SAVED ON A PRODUCT RECEIVED BY IT FOR SERVICE OR ON ANY FILM CONTAINED WITHIN A PRODUCT RECEIVED BY IT FOR SERVICE NOR SHALL OLYMPUS BE RESPONSIBLE FOR ANY DAMAGES IN THE EVENT ANY IMAGE OR DATA IS LOST OR IMPAIRED WHILE SERVICE IS BEING PERFORMED INCLUDING WITHOUT LIMITATION DIRECT INDIRECT INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES LOSS OF PROFITS OR LOSS OF USE WHETHER OR NOT OLYMPUS SHALL BE OR SHOULD BE AWARE OF THE POSSIBILITY OF SUCH POTENTIAL LOSS OR IMPAIRMENT Package the Product carefully using ample padding material to prevent damage in transit and either deliver it to the Authorized Olympus Dealer that sold you the Product or ship it postage prepaid and insured to any of our Olympus Service Centers When returning Products for service your package should include the following 1 Sales receipt showing date and place of purchase 2 Copy of this limited warranty bearing the Product serial number corresponding to the serial number on the Product unless it is a model on which Olympus does not place and record serial numbers 3 Adetailed description of the problem 4 Sample prints negatives digital prints or files on disk if available and related to the problem When service is completed the Product will be returned to you postage prepaid WHERE TO SEND PRODUCT FOR SERVICE See WORLDWIDE WARRANTY for t
79. serving the information given under this symbol serious injury or death may result If the product is used without observing the information given under this symbol injury or death may result If the product is used without observing the information given under this symbol minor personal injury damage to the equipment or loss of valuable data may result 64 EN WARNING TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK NEVER DISASSEMBLE EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT General Precautions Read All Instructions Before you use the product read all operating instructions Save all manuals and documentation for future reference Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by Olympus Water and Moisture For precautions on products with weatherproof designs read the weatherproofing sections Location To avoid damage to the product mount the product securely on a stable tripod stand or bracket Power Source Connect this product only to the power source described on the product label Lightning If a lightning storm occurs while using a USB AC adapter remove it from the wall outlet immediately
80. site http www olympus com for the authorized international Olympus service network For customers in Asia Provisions of warranty 1 If this product proves to be defective although it has been used properly in accordance with the written Handling Care and Operating instructions supplied with it during a period of up to one year from the date of purchase this product will be repaired or at Olympus s option replaced free of charge To claim under warranty the customer must take the product and this Warranty certificate before the end of the one year warranty period to the dealer where the product was purchased or any Olympus authorized service station listed in the instructions and request the necessary repairs 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product 3 This warranty does not cover the following and the customer will be required to pay repair charge even for defects occurring within the one year period referred to above a Any defect that occurs due to mishandling such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions etc b Any defect that occurs due to repair modification cleaning etc performed by anyone other than Olympus or an Olympus authorized service station c Any defect or damage that occurs due to transport a
81. tering spot metering system Shutter speed 4 to 1 1400 sec Shooting range Normal 0 3 m 1 0 ft to co W us Macro mode 2 2 m 7 2 ft to oo T 0 3 m 1 0 ft to co W 2 2 m 7 2 ft to oo T Super macro mode 0 01 m 0 03 ft to oo W only Monitor 3 0 TFT color LCD display 460 000 dots Connector Multi connector DC IN jack USB connector A V OUT jack HDMI micro connector type D Automatic calendar system 2000 up to 2099 EN 73 Operating environment Temperature 0 C to 40 C 32 F to 104 F operation 20 C to 60 C 4 F to 140 F storage Humidity 30 to 90 operation 10 to 90 storage Power supply One Olympus lithium ion battery LI 50B or separately sold USB AC adapter Dimensions 102 7 mm W x 69 2 mm H x 70 3 mm D 4 0 x 2 7 x 2 8 in excluding protrusions Weight 376g 13 3 oz including battery and card Lithium ion battery 50B Product type Lithium ion rechargeable battery Model No LI 50BA LI 50BB Standard voltage DC3 7V Standard capacity 925 mAh Battery life Approx 300 full charges varies on usage Operating environment Temperature 0 C to 40 C 32 F to 104 F charging USB AC adapter EZAC Model No F 2AC 1A F 2AC 2A F 2AC 1B F 2AC
82. the lens and make a noise even if no operation is performed This is because the camera automatically performs actions of auto focus as far as it is ready to shoot Error message When one of the messages below is displayed on the monitor check the corrective action Error message Corrective action Error message Corrective action CJ The Image Cannot Be Edited Problem with selected image Use photo retouch software etc to edit the image on a computer B Card Error Card problem Insert a new card D Battery Empty Battery problem Charge the battery B Write Protect Card problem The card write protect switch is set to the LOCK side Release the switch a aX No Connection Connection problem Connect the camera and computer or printer correctly oD Internal memory problem Printer problem Load paper into the printer Next use A V to select Yes and press the button Insert a card No Paper Memory Full Erase unwanted images Printer problem B a ieee TK Refill the ink in the printer Card Full Erase unwanted images perapan Bac ED HY Printer problem Card problem Remove the jammed paper Use A V to select Format and Jammed Se press the button Next use Ssi Printer problem AV to select Yes and press the Petes Return to the status where the button ange printer can be used baraktos ited Internal me
83. ttery and card Battery card cover Battery lock knob E Write protect switch Insert the battery as illustrated with the mark toward the battery lock knob Damage to the battery exterior scratches etc may produce heat or an explosion a J Insert the battery while sliding the battery lock knob in the direction of the arrow Insert the card straight until it clicks into place Turn off the camera before opening the battery card cover When using the camera be sure to close the battery card cover Slide the battery lock knob in the direction of the arrow to unlock and then remove the battery Always use SD SDHC SDXC cards or Eye Fi card with this camera Do not insert other types of memory cards Using the card p 62 Do not touch the contact area of the card directly This camera can be used without a card by storing images in its internal memory 3 Number of storable pictures still images Continuous recording length movies in the internal memory and cards p 63 64 EN 11 To remove the card Press the card in until it clicks and comes out slightly then remove the card Charging the battery with the included USB AC adapter The included F 2AC USB AC adapter hereafter referred to as USB AC adapter differs depending on the region where you purchased the camera If you received a plug in type USB AC adapter pl
84. ug it directly into AC outlet The included USB AC adapter has been designed to be used for charging and playback Do not take pictures while the USB AC adapter is connected to the camera Be sure to unplug the power plug of the USB AC adapter from the wall outlet when the charging is complete or the playback ends For details on the battery and the USB AC adapter see Battery and USB AC adapter p 61 The battery can be charged while the camera is connected to the computer Charging time varies depending on the performance of a computer There may be cases in which it takes approx 10 hours 12 EN Connecting the camera Multi connector USB cable supplied Indicator lamp On Charging Off Charged The battery is not fully charged at shipment Before use be sure to charge the battery until the indicator lamp turns off up to 5 hours If the indicator lamp does not light the USB AC adapter is not connected to the camera correctly or the battery camera or USB AC adapter may be broken When to charge the batteries Charge the battery when the error message shown below appears Error message D Battery Empty Flashes in red Installing the PC software and registering user Installation of ib computer software using the supplied CD is available on Windows computers only Windows 1 Insert the supplied CD in a CD ROM drive Windows XP
85. ver depending on the country or area you are in the AC wall outlet may be shaped differently and the charger and USB AC adapter may require a plug adapter to match the wall outlet For details ask at your local electrical shop or travel agent Do not use travel voltage converters as they could damage your charger and USB AC adapter Eye Fi card Use commercially available Eye Fi cards The Eye Fi card may become hot during use When using an Eye Fi card the battery may run out faster When using an Eye Fi card the camera may function more slowly Using the card A card and internal memory also corresponds to the film that records images in a film camera Otherwise the recorded images data can be erased and retouching is also available with the use of a computer Cards can be removed from the camera and exchanged but this is not possible with the internal memory Use of larger capacity cards enables you to take more pictures 62 EN Cards compatible with this camera SD SDHC SDXC Eye Fi card for compatibility card details visit the Olympus website GIS XC SD SDHC SDXC card write protect switch The SD SDHC SDXC card body has a write protect switch If you set the switch to the LOCK side you will not be able to write to the card delete data or format Return the switch to enable writing gt SD Checking the image saving location The memory indicator shows whether the internal memory o
86. within the AF target mark The camera tracks the subject movement automatically to focus on it continuously AF Tracking t For some subjects the frame may not appear or may take some time to appear 2 If the frame blinks in red the camera cannot focus Try refocusing on the subject To focus on a moving subject continuously AF Tracking Hold the camera to align the AF target mark on the subject and press the button When the camera recognizes the subject the AF target mark automatically tracks the subject movement to focus on it continuously To cancel the tracking press the button Depending on the subjects or the shooting conditions the camera may be unable to lock the focus or fail to track the subject movement When the camera fails to track the subject movement the AF target mark changes to red 36 EN Selecting the method for measuring the brightness ESP Camera Menu 1 gt ESP Ce Submenu 2 Application Shoots to obtain a balanced brightness over the entire screen ESP Meters the brightness at the center and surrounding areas of the screen separately Shoots the subject at the center during backlighting Meters the brightness at the center of the screen spot When set to ESP the center may appear dark when shooting against strong backlighting Shooting at higher magnifications than optical zoom Digital Zoom Cam
87. y Format Format p 44 Use IP to select an image Press the button e Press the button again to cancel the settings If necessary repeat Steps and to protect other images and press the MENU button Rotating images GG Playback Menu gt 4 Use lt I gt to select an image Press the button to rotate the image If necessary repeat Steps and to make settings for other images and press the MENU button The new picture orientations will be saved even after the power is turned off Setting images to upload to Internet using OLYMPUS Viewer 2 Upload Order Playback Menu gt Upload Order Use lt I gt to select an image Press the button e Press the button again to cancel the settings If necessary repeat Steps M and to make settings for other images and press the MENU button Only JPEG files can be ordered For details on uploading images refer to OLYMPUS Viewer 2 Help EN 43 Menus for Other Camera Settings The default settings of the function are highlighted in Erasing data completely Memory Format Format f Settings Menu 1 Memory Format Format Before formatting check that no important data is left in the internal memory or card Cards must be formatted with this camera before first use or after being used with other cameras or computers Be sure to remove the card before formatting the internal m
88. ze Submenu 3 and press D If the Printpaper screen is not displayed the Size Borderless and Pics Sheet are set to the printer s standard Printpaper Back MENU Size Borderless Standard 52 EN varies depending on the printer Multi Print is selected in Step 3 The available settings for Borderless vary depending on the printer Du Standard is selected in Steps 4 and 5 the image is printed at the printer s standard settings 6 Use lt D to select an image 7 Press A to make a print reservation for the current image Press V to make the detailed printer settings for the current image To make the detailed printer settings Use A V lt I gt to select the setting and press the button Submenu 5 Submenu 6 Application This selects the number DX do 10 of prints Selecting With prints the images with the date Selecting Without prints the images without the date Date With Without Selecting With prints the file name on the image With Without Selecting Without does not print any file name on the image File Name Proceeds to 8H the setting screen This selects a portion of the image for printing To crop an image 1H Use the zoom lever to select the size of the cropping frame use A V IP to move the frame and then press the button Cropping frame Use A V to select OK and press the butt

Olympus SP-720UZ

Contents

Download Pdf Manuals

Related Search

Related Contents