Nilfisk C 120.3-6
Contents
1. 1 2 garden hose of min 10 m and max 25 m will be suitable NOTE Connec tion to the public mains according to regulations The spray lance is affected by a thrust during operation therefore always hold it firmly with both hands IMPORTANT Point the nozzle at the ground 1 Check that the machine is in upright position NOTE Do not place the machine in high grass 2 Release the trigger lock 3 Activate the trigger of the spray gun and let the water run until all air has escaped from the water hose 4 Turn the start stop switch 1 to position l 5 Activate the trigger of the spray gun Always adjust the distance and thus the pressure of the nozzle to the surface which is to be cleaned IMPORTANT IS Only use water without any impurities If there is a risk of running sands in the inlet water i e from your own well an additional filter should be mounted 1 Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrat ing the machine Note Check that the filter is fitted in the water inlet pipe and that it is not clogged up 2 Connect the water hose to the water supply by means of the quick connector inlet water max pressure 10 bar max temperature 40 C 3 Turn on the water Do not cover the machine during operation Note If the ma chine is left or not used for 5 min utes it must be switched2. Rinse ac cording to requirement Rinse the detergent spraying attachment after use e Clean the nozzles Any repair should always be made in an authorized work shop with original spare paris Clean the water inlet filter regularly once a month or more frequently according to use Carefully loosen the filter with a screwdriver and clean it Check that it is intact before re mount ing it The inlet filter must always be fitted inside the water inlet pipe to filter out sand limestone and other impurities as they will damage the pump valves CAUTION Failure to fit the filter will invalidate the guarantee A clogging up in the nozzle causes a pump pressure which is too high This is why cleaning is required immediately 1 Stop the machine and dis connect the nozzle 2 Clean the nozzle IMPOR TANT The cleaning tool 11 should only be used when the nozzle is detached 3 Flush the nozzle backwards with water Original Instructions 13 Nilfisk C 120 3 C 125 3 C 130 1 EN 7 3 Cleaning of machine vents 7 4 Greasing of couplings The machine should be kept clean so as to let cooling air pass freely through the ma chine vents To ensure an easy connec tion and that o rings do not dry up the couplings should be greased regularly 14 Original Instructions 8 Trouble shooting Nilfisk C 120 3 C 125 3 C 130 1 To avoid unnecessary disappointments you should check the followi
3. You may use the multiangle adaptor for hard to get at adaptor Metal areas to avoid splashing Cleaner 10 Original Instructions Nilfisk C 120 3 C 125 3 C 130 1 6 After using your pressure washer 6 1 Storing the washer 6 2 Winding up of electric cable and high pressure hose The machine should be sto red in a frost free room Pump hose and accessories should always be emptied of water prior to storing as follows 4 Stop the machine turn the start stop switch 1 to position O and detach wa ter hose and accessory Restart the machine and activate the trigger Let the machine run until no more water runs through the spray gun 3 Stop the machine unplug and wind up hose and cable 4 Place spray handle nozzles and other accessories in the holders of the machine Should the machine by mistake be frozen it will be necessary to check it for damage NEVER START UP A FROZEN MACHINE Frost damages are not covered by the guarantee To avoid accidents the electric cable and the high pressure hose should always be winded carefully up Wind up the electric cable and the high pressure hose on the appropriate hooks Built in clip for good holding The high pressure washer comes in two models A with hook for storage of high pres sure hose 14 B with a hose reel 13 where the hose is pushed into the reel and after wards winded up Original Instruction
4. and wheel arches Undershassis Integrated guide shoes nozzle Click 8 Clean Adjusted in angles from 0 90 for better working posture and Multiangle cleaning of hard to get at places as for instance barrels or the adaptor underside of the lawn mower Fits all nozzles Click amp Clean For cars and other surfaces Available in more shapes Brushes Extension hose 7 m extension hose increasing the working range Underchassis Special spray lance for washing your car underneath spray lance Q Drain 8 Tube 15 m long tube cleaner for the cleaning of tubes and drains cleaner Water sand For removal of paint and rust Sand available from do it your blasting equip self shops ment Patio Plus Equipment for quick cleaning of patio drive flagstones Garden brush Rotary brush for cleaning of wooden surfaces Rim brush Rotary brush for cleaning of wheel rims Wall hook For suspension of your high pressure washer on the wall Rotary brush For cleaning vehicles and other surfaces Water suction kit For removal of large amounts of water from e g garden pounds Original Instructions 17 Nilfisk C 120 3 C 125 3 C 130 1 Detergents Stone amp Wood Cleaner Plastic Cleaner Metal Cleaner Car Combi Cleaner Alu Cleaner Oil amp Grease Cleaner Wood Cleaner For flagstones brick and woodwork Suitable for moss and algae For plastic and synthetic materials such as garden furniture For cleaning of metal such a
5. at the end of this manual ANOoOaRWND co 10 11 12 13 14 15 16 17 Start stop switch Water inlet with filter High pressure connection High pressure hose Electric cable Click amp Clean spray lance Spray gun with lock Click amp Clean Tornado PR nozzle Click amp Clean Powerspeed nozzle Click amp Clean foam sprayer Nozzle cleaning tool Trolley Handle Hose reel not standard Hose hook Model tag Warning sign Cable hook Nilfisk C 120 3 C 125 3 C 130 1 the high pressure washer for vaious cleaning jobs Only use the high pressure washer for purposes described in this manual The safety precautions must be observed to prevent damage to the machine the surface to be cleaned or severe personal injuries Specifications See model tag 15 of machine We reserve the right to alter the specifications Original Instructions Nilfisk C 120 3 C 125 3 C 130 1 3 Before you start using your pressure washer 3 1 Mounting of trolley handle and hose hook 1 Mount the trolley handle 12 on the machine 2 Mount the hose hook 14 on the handle 3 2 Mounting of trolley hand le and hose reel models with hose reel 1 Mount the trolley handle 12 on the machine 2 Mount the hose reel 13 on the handle AN l l SSI 3 3 Mounting of cable book C 130 1 X TRA Click cable hooks 17 on to the machine 3 4 Mounting of quic
6. lt is rec ommended that this is accom plished by means of a cable reel which keeps the socket at least 60 mm above the ground Cables on extension lead drums should always be com pletely unwound to prevent the cable from overheating Extension cables must comply with the below mentioned re quirements for length and cable dimensions 1 0 mm max 12 5 m 1 5mm max 20m 2 5mm max 30 m l the electric cable is damaged it must be re placed by the manufacturer or his service agent or simi larly qualified person in order to avoid a hazard Mains power connection The following should be ob served when connecting the high pressure washer to the electric installation e Only connect the machine to an installation with earth con nection The electric installation shall be made by a certified elec trician and comply with IEC 364 t is recommended that the electric supply to this ap pliance should include a residual current device that will interrupt the supply if the leakage current to earth ex ceeds 30 mA for 30 ms Water connection Connection to the public mains according to regulations Machine not suit able for connec tion to the potable water mains This high pressure washer is only allowed to be connected with the drinking water mains when an appropriate backflow preventer has been installed Type BA according to EN 1717 The backflow preventer can be ordered under number 1
7. nozzle 2 Wash the car with the car nozzle which has been optimized for Foam sprayer guick and gentle cleaning of enamelled surfaces the jet is wider Car Combi Cleaner and not so sharp Start at the front of the car and work back wards to avoid water from penetrating by the door mouldings 3 Use the brush for removal of traffic film which is not removed by the nozzle If the car is very dirty apply Car Combi Cleaner again 4 Attach the undercarriage nozzle and clean undercarriage and wheel arches 5 Remove water from the surface of the car with the scraper on the car brush Make sure that all grains of sand etc have been removed before using the scraper Wipe with a wash lea ther where the scraper cannot reach Rims alu Rim brush Apply Alu Cleaner with an automizer Let it act for approx minium auto nozzle 5 min and wash with the rim brush For steel rims use Car Com atomizer bi Cleaner Use the foam sprayer and wash with rim brush Alu Cleaner Be careful The high pressure jet may damage the tyres Flagstones Powerspeed Wash towards outlets or the like On surfaces with moss or concrete nozzle algae you may start by applying Stone amp Wood Cleaner with floors and Stone 8 Wood the foam sprayer Wash before the soap dries Another other hard Cleaner more effective and quicker method is to use the Patio surfaces Patio Cleaner Cleaner Thus you will also avoid splashes Garden Wood Cleaner Apply Wood Cleaner and wash before the s
8. the manufacturer The use of other cleaning agents or chemicals may adversely affect the safety of the appliance e To ensure the appliance safety only use original spare parts from the manufacturer or approved by the manufac turer e High pressure hoses fittings Original Instructions 3 Nilfisk C 120 3 C 125 3 C 130 1 and couplings are important for the safety of the appli ance Only use hoses fittings and couplings recommended by the manufacturer Do not use the appliance if a supply cord or impor tant parts of appliance are damaged e g safety device high pressure hose and trig ger gun Remove the plug from the socket outlet during cleaning or maintenance and when replacing parts or converting the machine to another func tion Appropriate ear protection has to be used Never use the machine in an environment where there could be a danger of explo sion If any doubt arises please contact the local authorities t is not allowed to clean asbestos containing surfaces with high pressure Do not spray flammable liq uids Always switch off the mains disconnecting switch when leaving the machine unat tended This high pressure washer must not be used at tempera tures below 0 C WARNING Inadequate extension cables can be dangerous If an exten sion cable is used it shall be suitable for outdoor use and the connection has to be kept dry and off the ground
9. 06411177 The length of the hose between the backflow preventer and the high pres sure washer must be at least 10 metres to absorb possible pressure peaks min diameter Ye inch Operation by suction for ex ample from a rainwater vessel is carried out without backflow preventer Recommended suc tion set 126411387 As soon as water has flown through the BA valve this water is not considered to be drinking water any more IMPORTANT Only use wa ter without any impurities If there is a risk of running sands in the inlet water i e from your own well an additional filter should be mounted Safety devices Locking device on spray gun 7a see foldout at the end of this manual The spray gun features a lock ing device When the pawl is activated the spray gun cannot be operated Thermal sensor A thermal sensor protects the motor against overloading The machine will restart after a few minutes when the thermal sen sor has cooled Pressure safety device An integrated hydraulic safety valve protects the system from excessive pressure Original Instructions 2 Description 2 1 Application 2 2 Operation elements and model survey IS Th be is high pressure washer has en developed for domestic use within Car motorbike boat cara van trailer patio drive flag stones woodwork brickwork barbecue garden furniture lawn mower Section 5 describes the use of See illustration
10. 6 2 22398812 Web http www nilfisk advance com tw THAILAND Nilfisk Advance Co Ltd 89 Soi Chokechai Ruammitr Viphavadee Rangsit Road Ladyao Jatuchak Bangkok 10900 Tel 66 2275 5630 TURKEY Nilfisk Advance A S Serifali Mh Bayraktar Bulv Sehit Sk No 7 Umraniye Istanbul Tel 90 216 466 94 94 E mail info tr nilfisk advance com Web http www nilfisk com tr UNITED KINGDOM Nilfisk A Division of Nilfisk Advance Ltd Bowerbank Way Gilwilly Industrial Estate Penrith Cumbria CA11 9BO Tel 01768 868995 Web http www nilfisk co uk UNITED ARAB EMIRATES Nilfisk Advance Middle East Branch SAIF Zone P O Box 122298 Sharjah Tel 971 0 655 78813 VIETNAM Nilfisk Advance Representative Office No 51 Doc Ngu Str Ba Dinh Dist Hanoi Tel 84 904266368 E mail nilfisk G vnn vn
11. A Nilfisk C 120 3 Nilfisk C 125 3 Nilfisk C 130 1 X TRA EN User Manual RR Niifisk Copyright 6 2012 Nilfisk Division of Nilfisk Advance A S Index 1 Safety precautions and Warnings scccseseese 3 2 DOESCNAP ON kane foyer ia teke dete pe aaa tease ion aa pe 5 3 Before you start using your pressure washer 6 4 Operating your pressure washer c se 7 5 Fields of Application and working methods 9 6 After using your pressure washer aaaa 11 7 Maintenance HH HH ok 13 8 Trouble Shooting S1 HH HH HH 15 9 Further information cc c1 S aaa 16 10 Main Technical Data ar 19 11 EC Declaration of Conformity W u sssesneserererrernren a 20 Nilfisk C 120 3 C 125 3 C 130 1 1 Safety Precautions and Warnings i Symbols used to mark in structions Do not let children or people who have not read the instruc tion manual operate the ma chine This appliance is not intended for use by children or other persons without assistance or supervision if their physical sensory or mental capabili ties prevent them from using it safely Children should be su pervised to ensure that they do not play with the appliance Before starting up your machine please check it carefully for any defe
12. Tel 64 9525 3890 Web http nilfisk com au NORWAY Nilfisk Advance AS Bjernerudveien 24 1266 Oslo Tel 47 22 75 17 80 Web http www nilfisk no POLAND Nilfisk Advance Sp z o o Millenium Logistic Park ul 3 go Maja 8 Bud B4 05 800 Pruszk w Tel 48 22 738 3750 E mail biuro nilfisk pl Web http www nilfisk pl PORTUGAL Nilfisk Advance Sintra Business Park Zona Industrial Da Abrunheira Edificio 1 1 A P2710 089 Sintra Tel 351 21 911 2670 Web http www nilfisk pt RUSSIA Hundpouck 3aBahc 127015 Mocksa Bartckaa yn 27 CTp 7 Poccna Tel 7 495 783 9602 E mail info nilfisk ru Web http www nilfisk ru SOUTH KOREA Nilfisk Advance Korea 471 4 Kumwon B D 2F Gunja Dong Gwangjin Gu Seoul Tel 82 2497 8636 SOUTH AFRICA WAP South Africa Pty Ltd 12 Newton Street 1620 Spartan Kempton Park Tel 27 11 975 7060 E mail mhenstock wap co za SPAIN Nilfisk Advance S A Torre D Ara Paseo del Rengle 5 PI 10 08302 Matar Tel 34 93 741 2400 E mail mkt es Qnilfisk com Web http www nilfisk es SWEDEN Nilfisk ALTO Sverige AB Aminogatan 18 431 O4M lndal Tel 46 31 706 73 00 E mail info se nilfisk com Web http www nilfisk se SWITZERLAND Nilfisk Advance AG Ringstrasse 19 Kirchberg lndustrie Stelz 9500 Wil Tel 41 71 92 38 444 Web http www nilfisk ch TAIWAN Nilfisk Advance Taiwan Branch H K No 5 Wan Fang Road Taipei Tel 88
13. cts If you find any do not start up your machine and con tact your Nilfisk distributor Before starting up your high pressure washer for the first time this instruction manual must be read through carefully Save the instructions for later use Safety instructions marked with this symbol must be observed to pre vent danger to persons Especially check e The insulation of the electric cable should be faultless and without any cracks If the electric cable is damaged an authorized Nilfisk distributor should replace it WARNING e High pressure jets can be dangerous Never direct the water jet at persons pets live electrical equipment or the machine itself e Never try to clean clothes or footwear on yourself or other persons e Hold the spray lance firmly with both hands The spray lance is affected by a thrust of up to 16 4 N during ope ration This symbol is used to mark safety instructions that must be ob served to prevent damage to the machine and its performance indicates tips and instructions to simplify work and to ensure a safe operation This symbol e The operator and anyone in the immediate vicinity of the site of cleaning should take action to protect themselves from being struck by debris dislodged during operation Wear goggles and protection clothes during operation e This appliance has been de signed for use with cleaning agents supplied or recom mended by
14. k coupling 1 Screw the quick coupling tight on to the water inlet 2 Note The inlet filter must always be fit ted in the water inlet pipe to filter out sand limestone and other impurities as these will damage the pump valves Caution Failure to fit the filter will invalidate the guarantee 6 Original Instructions 3 5 Mounting of high pres sure hose 4 1 Connection of high pres sure hose 4 2 Mounting of spray lance and Click 8 Clean nozzles 1 Push the spray lance 6 into the spray gun 7 and screw it on Nilfisk C 120 3 C 125 3 C 130 1 Attach the high pressure hose 4 to the spray gun 7 Detach the high pressure hose by pressing the pawl A 1 Mount the high pressure hose on the outlet 3 Note The IS spray lance 6 has a built in low pressure nozzle that can be used for flushing away dirt 2 Attach the nozzle Warning When attaching the Click amp Clean nozzles the pawl on the side of the spray lance should come out again IS nado PR nozzle and the foam sprayer feature a swivel lock which must be positioned in the hole in the Click amp Clean spray lance Note The Tor Press the pawl to detach the Click amp Clean nozzle Original Instructions EN Nilfisk C 120 3 C 125 3 C 130 1 EN 4 3 Water connection 4 4 Start and stop of the machine when con nected to a water supply A LoS An ordinary
15. n thoroughly observed that repair has not been car ried out or attempted by oth er than Nilfisk trained service staff that only original accessories have been applied that the product has not been exposed to abuse such as knocks bumps or frost that only water without any impurities has been used that the high pressure wash er has not been used for rental nor used commercially in any other way As specified in European Direc tive 2002 96 EC on old electri cal and electronic appliances used electrical goods must be collected separately and recycled ecologically Contact your local authorities or your nearest dealer for further information Repairs under this guarantee include replacement of defec tive parts exclusive of packing and postage carriage Besides we refer to your national law of sale The machine should be for warded to one of the service centres of the Nilfisk organisa tion with description specifica tion of the fault Repairs not covered by the guarantee conditions will be invoiced l e malfunctions due to Causes mentioned in section Troubleshooting Chart of the instruction manual 16 Original Instructions Nilfisk C 120 3 C 125 3 C 130 1 9 3 Accessories Only use original accessories Click 8 Clean Special nozzle for enameled surfaces Optimal distance 30 Car nozzle 50 cm Click 8 Clean 90 angled special nozzle for undercarriage
16. ng before contacting the Nilfisk service organization Symptom Cause Recommended action Machine refuses to start Machine not plugged in Defective socket Fuse has blown Defective extension cable Plug in machine Try another socket Replace fuse Switch off other machines Try without the extension cable Fluctuating pressure Pump sucking air Valves dirty worn out or stuck Pump seals worn out Check that hoses and connections are air tight Clean and replace or refer to local Nilfisk distributor Clean and replace or refer to local Nilfisk distributor Motor busses Low voltage or low temperature Activate the trigger of the spray gun Fuse has blown Incorrect mains voltage Machine stops Thermal sensor activated Nozzle partially blocked Replace fuse Switch off other machines Check that the mains voltage corresponds to specification on the model tag Leave the washer for 5 minutes to cool down Clean the nozzle see section 7 2 Fuse blows Fuse too small Change to an installation higher than the amp consumption of the machine You may try without the extension cable Machine pulsating Air in inlet hose pump Inadequate supply of mains water Nozzle partially blocked Water filter blocked Hose kinked Allow machine to run with open trigger until regular working pressure resumes Check that the water supply corresponds to specifications required see model tag NB Avoid usi
17. ng long thin hoses min 1 2 Clean the nozzle see section 7 2 Clean the filter see section 7 1 Straighten out hose Machine often starts and stops by itself Pump spray gun is leaking Contact your nearest Nilfisk Service Centre Machine starts but no water comes out frozen No water supply Water filter blocked Nozzle blocked Pump hoses or accessory Wait for pump hoses or accessory to thaw Connect inlet water Clean the filter see section 7 1 Clean the nozzle see section 7 2 In case problems other than the above occur please contact your local Nilfisk distributor UK Customer Services at Penrith 01768 868995 Original Instructions EN Nilfisk C 120 3 C 125 3 C 130 1 9 Further information 9 1 Recycling the washer 9 2 Warranty conditions Make the old cleaner unusable immediately 1 Unplug the cleaner and cut the electric cable Do not discard electrical appli ances with household waste Nilfisk guarantees high pres sure washers for domestic use for 2 years If your high pres sure washer or accessories are handed in for repair a copy of the receipt must be enclosed Guarantee repairs are being made on the following condi tions that defects are attributable to flaws or defects in materi als or workmanship wear and tear as well as misuse are not covered by the guar antee that the directions of this instruction manual have bee
18. nilfisk com Web http www consumer nilfisk at BELGIUM Nilfisk Advance NV SA Riverside Business Park Boulevard Internationale 55 Bruxelles 1070 Tel 32 14 67 60 50 Web http www nilfisk be CHILE Nilfisk Advance de Chile San Alfonso 1462 Santiago Tel 56 2 684 5000 E mail Pablo Noriega Qnilfisk com CHINA Nilfisk Advance Cleaning Equipment Shanghai Ltd No 4189 Yindu Road Xinzhuang Industrial Park Shanghai 201108 Tel 86 21 3323 2000 E mail info sha cn nilfisk com Web http www nilfisk cn CZECH REPUBLIC Nilfisk Advance s r o VGP Park Horni Pocernice Budova H2 Do Certous 1 Praha 190 00 Tel 420 244 090 912 E mail info nilfisk cz Web http www nilfisk cz DENMARK Nilfisk ALTO Danmark Industrivej 1 9560 Hadsund Tel 45 7218 2120 E mail salg dk nilfisk alto com Web http www nilfisk dk FINLAND Nilfisk Advance Oy Ab Koskelontie 23E 02920 Espoo Tel 358 207 890 600 Web http www nilfisk fi FRANCE Nilfisk Advance 26 Avenue de la Baltique Villebon sur Yvette 91944 Courtaboeuf Cedex Tel 169 59 87 24 E mail info fr nilfisk advance fr Web http www nilfisk fr GERMANY Nilfisk ALTO Guido Oberdorfer Strasse 10 89287 Bellenberg Tel 49 7306 72 0 E mail info consumer de nilfisk com Web http www nilfisk de GREECE Nilfisk Advance SA 8 Thoukididou str 164 52 Argiroupoli Tel 30 210 9119 600 E mail info nilfisk gr Web ht
19. oap dries furniture Garden brush NOTE Use the garden brush to clean off the dirt wood Brickwork Powerspeed Same method as for flagstones but be careful bad joints and Wood work nozzle wood may be damaged by high pressure You may choose only Stone amp Wood to use the Tornado nozzle Adjust the distance pressure to Cleaner the quality of the joints and the wood Patio Cleaner can also be Patio Cleaner used on vertical surfaces Gutter Underchassis spray Wash the gutter with the nozzle Always wash towards lance downpipes Beware not to spray under the roofing Cleaning Tube cleaner Push the tube cleaner approx m to mark into a tube or drain of drain and activate the trigger of the spray handle The nozzle opening pipes out turning backwards will pull the cleaner through the tube The lets down nozzle will break down the plug and flush the dirt backwards pipes etc Rust paint Water sandblasting Mount the water sand blasting equipment and rust and paint equipment is efficiently and quickly removed Beware not to damage the surface to be sandblasted Green Tornado PR nozzle Wash with high pressure and maybe a brush You may use Stone house brush Stone 8 8 Wood Cleaner to remove moss and algae Wood Cleaner Garden Tornado PR noz Rinse the worst dirt off with the nozzle Apply Metal Cleaner with tools lawn zle Powerspeed the foam sprayer and let it act for approx 5 min Wash with the mover nozzle multiangle nozzle
20. oduct High Pressure Washer Type Nilfisk C 120 3 C 125 3 C 130 1 and accessory variants of above mentioned types The design of the unit corresponds to EC Machine Directive 2006 42 EC the following pertinent regulations EC Low voltage Directive 2006 95 EC EC EMC Directive 2004 108 EC Applied harmonised standards EN 60335 2 79 Applied national standards and techni IEC 60335 2 79 cal specifications Name and address of the person autho Anton Sgrensen rised to compile the technical file General Manager Technical Operations EAPC Nilfisk Advance A S Sognevej 25 DK 2605 Br ndby Identity and signature of the person empowered to draw up the declaration on behalf of the manufacturer Anton S rensen General Manager Technical Operations EAPC Nilfisk Advance A S Sognevej 25 DK 2605 Br ndby Place and date of the declaration Hadsund October 1 2011 20 Original Instructions 12 13 1 2 C 130 1 X TRA ST A LG 4 AL V O 77 3 ONilfisk trusted since 1906 Web http www nilfisk com HEAD GUARTER DENMARK Nilfisk Advance Group Sognevej 25 DK 2605 Brondby Tel 45 4323 8100 E mail kundeservice dk nilfisk com SALES COMPANIES AUSTRIA Gesch ftsbereich der Nilfisk Advance GmbH Metzgerstrasse 68 A 5101 Bergheim Salzburg Tel 43 0 662 45 64 00 90 E mail info at amp
21. off on the start stop switch O 1 1 Turn the start stop switch 1 to position O 2 Disconnect the electrical plug from the socket 3 Shut off the water supply and activate the trigger to relieve the machine of pressure 4 Lock the spray gun When releasing the trigger of the spray gun the machine automatically stops The ma chine will start again when you re activate the spray gun Original Instructions 4 5 Start the machine when connected to open con tainers suction mode 4 6 Pressure regulation on the TORNADO PR nozzle The washer can take in water from a rain water tank as an example The hose for the wa ter supply must not be too long approx 5 m Nilfisk C 120 3 C 125 3 C 130 1 1 Place the other end of the water hose in the water tank Use an external filter if the water contains impurities 2 Turn the start stop switch 1 to position l Make sure that the water tank 3 Activate the trigger of the is not placed on a lower level spray gun and let the water than the machine run until the air has escaped from the water hose and the pump 4 Mount spray lance and nozzle The pressure can be regulated on the TORNADO PR nozzle High pressure Low pressure 5 Fields of application and working methods 5 1 General 5 1 1 Detergent and foam 5 1 2 Mechanical effect Efficient high presure cleaning is achieved by following a few guide lines combined with your
22. own personal experience of specific cleaning tasks Accessories and detergents when correctly cho sen can increase the efficiency of your pressure washer Here is some basic information about cleaning Foam or detergent should be applied onto dry surfaces so that the chemical product is in direct contact with the dirt Detergents are applied from bottom to top for example on a car bodywork in order to avoid super clean areas where the detergent collects in higher concentration and streams downwards Let the detergent work for several minutes before rinsing but never let it dry on the surface be ing cleaned Note It is important that the detergents do not dry up Otherwise the surfac that has to be cleaned can be damaged In order to break down tough layers of dirt additional mechanical effect may be required Special wash brushes offer this supplemen tary effect that cuts through dirt especially by car washing Original Instructions Nilfisk C 120 3 C 125 3 C 130 1 5 2 Typical fields of application Below you will find a description of a lot of cleaning tasks which can be solved by a pressure washer from Nilfisk in association with accessories and detergents Task Accessories Click Cleaning method 8 Clean Car Car nozzle 1 Apply Car Combi Cleaner with the foam sprayer Always auto brush start from the bottom and work upwards Let Car Combi underchassis Cleaner act for at least 5 min
23. s Nilfisk C 120 3 C 125 3 C 130 1 6 3 Storage of accessories C 130 1 X TRA The standard accessories spray gun spray lance noz zles and foam sprayer can be stored on the pressure washer The nozzle cleaning tool can also be stored on the product The pressure washer can be stored on a wall on a special wall hook not standard Only mount the wall hook on a sturdy wall Adjust the length of the screws and size of rawl plugs to the type of wall On the wall hook garden rim brush a foam sprayer b Click 8 Clean brush c and Click amp Clean nozzles d can be stored Note For this product the wall hook can only be used as storage Important The bearing capacity of the wall hook is max 30 kg 12 Original Instructions 7 Maintenance 7 1 Cleaning of water inlet filter 7 2 Cleaning of nozzle WARNING Always disconnect the electrical plug from the socket prior to maintenance or cleaning Nilfisk C 120 3 C 125 3 C 130 1 To ensure a long and problem free working life please take the following advice e Wash out water hose high pressure hose spray lance and accessories before mounting e Clean the connectors of dust and sand Make sure that no sand or dirt is blocking the movement of the pawl on the Click 8 Clean spray lance
24. s garden tools For cars etc With rinsing wax For surfaces of aluminium Applied with an atomizer For cleaning of grease and oil on motors for instance Applied with an atomizer For cleaning of wooden surfaces incl of wooden garden furniture 18 Original Instructions 10 Main Technical Data Nilfisk C 120 3 C 125 3 C 130 1 Electrical Specification Rated voltage V 230 230 230 Rated freguency Hz 50 50 50 Rated power consumption kW 1 650 1 800 1 700 Current A 7 2 7 8 7 8 Protection class i Class II Class II Class I Protection degree IP xx IPX5 IPX5 IPX5 Hydraulic specification Rated pressure MPa bar 10 100 10 5 105 11 5 115 Max pressure MPa bar 12 120 12 5 125 13 130 Rated water flow I min h 5 8 350 5 8 350 6 3 380 Max water flow l min h 8 6 520 8 6 520 7 3 440 Max water inlet pressure Mpa bar 1 10 1 10 1 10 Max water inlet temperature C 40 40 40 Max water inlet temp suction mode C 20 20 20 Weight kg 8 9 9 15 8 Hand arm vibration according to ISO 5349 1 Standard nozzle m s2 lt 2 5 1 lt 2 5 1 lt 2 5 1 level LpA in accordance with dB A 78 3 78 3 66 4 3 Guaranteed Sond power level LWA in dB A 92 92 84 accordance with 2000 14 EC Original Instructions 19 EN Nilfisk C 120 3 C 125 3 C 130 1 11 EU Declaration of Conformity C EU Declaration of Conformity Pr
25. tp www nilfisk gr HOLLAND Nilfisk Advance Versterkerstraat 5 1322 AN Almere Tel 31 365 460 700 E mail info nl nilfisk com Web http www nilfisk nl HONG KONG Nilfisk Advance Ltd Room 2001 HK Worsted Mills Industrial Building 31 39 Wo Tong Tsui Street Kvai Chung NT Tel 852 2427 5951 HUNGARY Nilfisk Advance Kereskedelmi Kit H 2310 Szigetszentmil s Lakihegy II R k czi Ferenc t 10 Tel 36 24 507 450 Web http www nilfisk hu INDIA Nilfisk Advance India Limited Pramukh Plaza B Wing 4th floor Unit No 403 Cardinal Gracious Road Chakala Andheri East Mumbai 400 099 Tel 91 22 61188199 IRELAND Nilfisk Advance 1 Stokes Place St Stephen s Green Dublin 2 Tel 35 3 12 94 38 38 ITALY Nilfisk Advance SpA Strada Comunale della Braglia 18 26862 Guardamiglio LO Tel 39 0377 41 40 31 Web http www nilfisk it JAPAN Nilfisk Advance Inc 1 6 6 Kita shinyokohama Kouhoku ku Yokohama 223 0059 Tel 81 45 548 2571 MALAYSIA Nilfisk Advance Sdn Bhd Sd 14 Jalan KIP 11 Taman Perindustrian KIP Sri Damansara 52200 Kuala Lumpur Tel 60 3603 627 43 120 MEXICO Nilfisk Advance de Mexico S de R L de C V Agustin M Chavez No 1 PB oficina 004 Col Centro de Ciudad Santa Fe 01210 Mexico D F Tel 52 55 2591 1002 switchboard E mail info G advance mx com NEW ZEALAND Nilfisk Advance Limited Danish House 6 Rockridge Avenue Penrose Auckland 1135
Download Pdf Manuals
Related Search