Tripp Lite AV10IRG surge protector
Contents
1. ECO Surge Suppressors Model AV10IRG This document explains the most important features of your surge suppressor For additional information download the Owner s Manual PDF from www tripplite com support manuals RoHS COMPLIANT Warranty Registration TRIPP LITE POWER PROTECTION 1111 W 35th Street Chicago IL 60609 USA www tripplite com support 201003022 indd 1 4 5 2010 9 59 16 AM Important Safety Instructions SAVE THESE INSTRUCTIONS CAUTION DO NOT connect to an ungrounded outlet DO NOT use with 2 wire extension cords or adapters This surge suppressor is designed for indoor use only Install the surge suppressor away from heat emitting appliances such as radiators or heat registers Do not install where excessive moisture is present Do not plug extension cords into it Never install electrical telephone network or coaxial wiring during a lightning storm Do not drill into any part of the housing or open the housing for any reason There are no user serviceable parts inside Installation Connect Your Surge Suppressor to the AC Power Line Plug the surge suppressor s power cord into a standard 3 wire grounded 120V AC outlet Once plugged in the unit will be powered There is no power control button or function for this surge suppressor Check Your Surge Suppressor s Diagnostic Indicator Lights Check the diagnostic LEDs prior to connecting your equipment They will indicate various oper2. work 201003022 indd 3 4 5 2010 9 59 16 AM Always On M L A IR RECEIVER Receives the signal from your remote to power on the GREEN Power Save outlets B IR LED Blue Indicates that remote signal is being received C GROUNDED LED Red Assures that wall outlet is grounded and surge protection can function D LED PANEL Shows real time amperage readings for the 7 Power Save outlets helping avoid power overloads E PROTECTED LED Green Assures that surge protection is present If this LED ever goes out Tripp Lite will replace your surge suppressor under warranty at no charge F AC POWER LED Red Indicates the ON OFF status of the ECO Surge Suppressor G CONVENIENT 8 FOOT SWIVELING POWER CORD Swivels on an angle to reach around corners or other obstacles to access distant outlets 201003022 indd 4 4 5 2010 9 59 18 AM POVER Power Save K H HD 2 2 Ghz COAX JACKS 3 LINE Three sets of gold coaxial F connectors protect components on satellite cable or antenna lines ALWAYS ON OUTLETS 3 with GREEN STATUS LEDs Provide continuous power to devices like DVRs TiVo cable and satellite boxes LEDs illuminate to indicate that power is present J POWER SAVE OUTLETS 7 Have AC power cut to idle components when turned off by GREEN Power Save technology perfect for intermittent use components like DVD players gaming consoles amplifiers and speaker sy
3. C outlet for phone line surge protection to work Connect Your Equipment to the Surge Suppressor s Network Jacks Optional Installation Connect a data cord from the wall jack or cable DSL modem directly to the surge suppressor s network jack labeled IN Connect a data cord from the surge suppressor s network jack labeled OUT directly to the device to be protected typically a computer s network interface card The surge suppressor must always be the first item connected in line from the Ethernet source typically a wall jack The surge suppressor must be plugged into a 3 wire grounded AC outlet for network line surge protection to work 10 100 BaseT TX Token Ring Not compatible with PoE Power Over Ethernet applications Connect Your Equipment to the Surge Suppressor s Coaxial Jacks Optional Installation Connect a coaxial cable from the wall jack directly to the surge suppressor s F style coaxial jack labeled IN Connect a coaxial cable from the surge suppressor s F style coaxial jack labeled OUT directly to the device to be protected Select models include a second set of coaxial jacks for simultaneous connection and protection of devices on two separate lines cable antenna or satellite The surge suppressor must always be the first item connected in line from the coaxial wall jack The surge suppressor must be plugged into a 3 wire grounded AC outlet for coaxial line surge protection to
4. ating conditions when the surge suppressor is plugged into a live 120V AC outlet AC POWER LED Red Indicates the power status ON OFF of the unit PROTECTED LED Green Indicates the surge suppression components are intact and providing complete protection against surges If this LED does not illuminate some of the surge suppression components are not functioning and the unit should be replaced Visit www tripplite com support for more information GROUNDED LED Red Indicates wall outlet is grounded and surge protection can properly function If this light DOES NOT illuminate and power is present consult a qualified electrician to examine your outlet s wiring STATUS LEDs Green Indicate that AC power is present in that Always On outlet IR LED Blue Indicates that the unit is receiving a signal from your remote Connect Your Equipment to the Surge Suppressor s Appropriate AC Outlets Plug your equipment s power cords into the surge suppressor s AC outlets DO NOT plug in extension cords DO NOT OVERLOAD the surge suppressor s outlets The surge suppressor can accommodate a total equipment load of up to 15 amps whether plugged into a single outlet or spread out over multiple outlets If the load on the surge suppressor exceeds 15 amps the circuit breaker will trip and the outlets will stop providing power If the circuit breaker trips reduce the load by unplugging some devices Depress the c
5. ill notice that the blue LED panel will display an amperage reading based on the connected load from the 7 Power Save outlets DO NOT OVERLOAD the surge suppressor with more than 15 amps If the LED panel or any of the LEDs do not operate visit www tripplite com support DO NOT EXCEED 15 AMPS Note If the surge suppressor is overloaded with more than 15 amps the circuit breaker will trip Reduce the load connected to the surge suppressor and press in the circuit breaker reset button located on the side panel to reset the system 201003022 indd 6 4 5 2010 9 59 19 AM 5 To activate the GREEN Power Save function simply turn OFF components plugged into the Power Save outlets The surge suppressor s technology will close the gate that provides AC power to these outlets approximately 3 minutes after it detects a 70 drop in power consumption Once this gate has closed power is no longer present in the Power Save outlets and phantom loads wasted electricity have been eliminated NOTE You can turn peripherals plugged into Power Save outlets OFF at any time however AC power will continue to flow to these outlets until three minutes after the GREEN technology detects a 70 drop in total power consumption Power is continuously provided to Always On outlets until the AV1OIRG is unplugged 201003022 indd 7 4 5 2010 9 59 19 AM WARRANTY REGISTRATION Visit www tripplite com warranty today to
6. ircuit breaker reset button to reset 201003022 indd 2 4 5 2010 9 59 16 AM Installation continued IMPORTANT CONNECTION NOTES It is important to note that your surge suppressor has Power Save and Always On outlets Power Save outlets will have AC power cut to them approximately 3 minutes after the GREEN Power Save technology detects that total power consumption in the Power Save outlets has dropped 70 Power Save outlets are recommended for intermittent use devices such as TVs receivers monitors printers scanners lamps DVD players gaming consoles amplifiers and speaker systems Always On outlets provide continuous power even after the Power Save outlets are turned OFF These outlets are recommended for critical devices such as modems routers external drives cordless phones fax machines DVRs TiVo cable and satellite boxes Connect Your Equipment to the Surge Suppressor s Phone Jacks Optional Installation Connect a phone cable from the wall jack directly to the surge suppressor s RJ style phone jack labeled IN Connect a phone cable from the surge suppressor s RJ style phone jack labeled OUT directly to the device to be protected All models with phone line surge protection protect devices ona single line only The surge suppressor must always be the first item connected in line from the wall jack The surge suppressor must be plugged into a 3 wire grounded A
7. register the warranty for your new Tripp Lite product You ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product No purchase necessary Void where prohibited Some restrictions apply See website for details Regulatory Compliance Identification Numbers For the purpose of regulatory compliance certifications and identification your Tripp Lite product has been assigned a unique series number The series number can be found on the product nameplate label along with all required approval markings and information When requesting compliance information for this product always refer to the series number The series number should not be confused with the marking name or model number of the product Warning Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended Do not use this equipment in the presence of a flammable anesthetic mixture with air oxygen or nitrous oxide FCC Part 68 Notice United States Only If your Modem Fax Protection causes harm to the telephone network the telephone company may temporarily discontinue your service If possible they will notify you in advance If advance notice isn t practical you will be notified as soon as possible You will be advised of your right to file a complaint with the FCC Yo
8. stems K RESETTABLE CIRCUIT BREAKER Protects the unit and your equipment against dangerous system overload L TEL MODEM NETWORK JACKS 1 Line Provide protection for Digital Video Recorders TiVo and other components on a single pay per view dial up or Ethernet line M IR EXTENSION JACK Works with an optional cord and small receiver to extend your IR transmission distance Not included go to www tripplite com for ordering details 5 201003022 indd 5 4 5 2010 9 59 18 AM 1 Plug the AV10IRG into an appropriate AC power source By plugging in the unit you have powered it ON there is no ON OFF function button to press Power will now be supplied to the 3 Always On outlets and any components plugged into them can be turned ON Each Always On outlet s corresponding LED will illuminate 2 Use any IR remote to turn ON the GREEN Power Save outlets Like a gate being opened AC power is now present in the 7 Power Save outlets IMPORTANT IR REMOTE NOTE Any standard IR remote will work with the AV10IRG There is absolutely no need for additional programming of this remote as long as itis a standard IR remote 3 Once the GREEN Power Save outlets have been powered ON any components plugged into these outlets can be switched ON using your master remote their individual remote controls or manually 4 After plugging the unit in and plugging in devices to the Power Save outlets you w
9. ur telephone company may make changes in its facilities equipment operations or procedures that could affect the proper operation of your equipment If it does you will be given advance notice to give you an opportunity to maintain uninterrupted service If you experience trouble with this equipment s Modem Fax Protection please visit www tripplite com support for repair warranty information The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure the equipment is not malfunctioning There are no repairs that can be made by the customer to the Modem Fax Protection This equipment may not be used on coin service provided by the telephone company Connection to party lines is subject to state tariffs Contact your state public utility commission or corporation commission for information Tripp Lite follows a policy of continuous improvement Product specifications are subject to change without notice TRIPP LITE POWER PROTECTION 1111 W 35th Street Chicago IL 60609 USA www tripplite com support 8 201003022 932988 EN 201003022 indd 8 4 5 2010 9 59 19 AM
Download Pdf Manuals
Related Search