Samsung UN46EH6000F
Contents
1. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Important Warranty Information Regarding Television Format Viewing amp See the warranty card for more information on warranty terms Wide screen format LED Displays 16 9 the aspect ratio of the screen width to height are primarily designed to view wide screen format full motion video The images displayed on them should primarily be in the wide screen 16 9 ratio format or expanded to fill the screen if your model offers this feature and the images are constantly moving Displaying stationary graphics and images on screen such as the dark sidebars on non expanded standard format television video and programming should be limited to no more than 5 of the total television viewing per week Additionally viewing other stationary images and text such as stock market reports video game displays station logos web sites or computer graphics and patterns should be limited as described above for all televisions Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle but permanent burned in ghost images in the LED picture To avoid this vary the programming and images and primarily display full screen moving images not stationary patterns or dark bars On LED models that of2. TV Signal Strength is unavailable in the Self Diagnosis Test menu e This function is only available for digital channels received through an Antenna RF Coax connection TV is tilted to the right or left side e Remove the stand base from the TV and reassemble it The Channel menu is grey out unavailable e The Channel menu is only available when you select the TV source Your settings are lost after 30 minutes or every time the TV is turned off e If TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Please change from Store Demo mode to Home Use mode using the Plug amp Play procedure Press the SOURCE button to select TV mode go to MENU gt Setup Plug amp Play gt ENTER You have intermittent loss of audio or video Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors You see small particles when you look closely at the edge of the frame of the TV This is part of the product s design and is not a defect POP TV s internal banner ad appears on the screen Select Home Use under Plug amp Play mode For details refer to Plug amp Play Initial Setup amp This TFT LED panel uses a panel consisting of sub pixels
3. amp Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or call 877 278 0799 E JACK PANEL DETAIL REAR VIEW ANTIN Unit inches Model name 1 2 3 4 5 6 UN40EH6000 UN40EH6050 9 6 5 8 5 8 24 1 7 8 7 8 UN46EH6000 UN46EH6050 11 6 52 7 3 29 8 15 7 5 7 UNS50EH6000 UN50EH6050 12 5 6 8 8 1 31 3 167 5 7 UN55EH6000 UN55EH6050 15 5 6 1 7 6 36 4 15 7 5 7 UN60EH6000 UN6OEH6050 16 7 8 6 8 8 38 5 15 7 5 7 NOTE All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Refer to the dimensions prior to performing installation of your TV Not responsible for typographical or printed errors 2012 Samsung Electronics America Inc 16
4. e Your connections are all consistent For example if you ve used the AV In jack on your TV make sure you have used the AV Out jack on your video source e Try making sure you have connected to the correct jacks For example if you use the Component jacks labeled Pb Pr and Y to connect your TV and video source make sure you have connected the blue Pb jack on the video source to the blue Pb jack on the TV the red Pr jack on the source to the red Pr jack on the TV Screen Brightness if you find that the colors on your Samsung TV are correct but just a little too dark or bright there are some settings you should check before calling for a repair Backlight Contrast Brightness Sharpness Color Tint and so on Go to Picture in the Menu and then try adjusting these options Unwanted Powering off if your Samsung TV appears to turn off by itself there may be an issue with either your Timer settings or your Eco riendly No Signal Power Off feature First make sure the Sleep Timer is not accidentally set The Sleep Timer lets you fall asleep with the TV still on nowing that it will turn off after a certain period of time and not waste energy Sleep Timer User Menu Setup Time Sleep Timer if the Sleep Timer is not activated you may have engaged the No Signal Power Off or Auto Power Off feature e No Signal Power Off User Menu Setup Eco Solution No Signal Power e Auto Power
5. amp gt gt FF buttons do not function during Photos 4 Pause 4p Previous Next 4 Tools 5 Return 1 In the Media Play menu press the lt or gt button to select Photos then press the ENTER C button 2 Press the lt gt A buttons to select a photo in the file list 3 Press the ENTER C button or gt Play button amp NOTE While a photo list is displayed press the Play ENTER G button on the remote control to start a slide show All files in the file list section will be displayed in the slide show During the slide show files are displayed in order During the slide show you can adjust the slide show speed using 44 REW or gt gt FF button You can move to other files using lt or gt button Media Play can play Music files automatically during a Slide Show if Background Music is set to On amp You cannot change the Mode in Background Music until the Background Music file has finished loading e Supported Photo Formats v amp Image Photo Resolution Base line 15360 x 8704 JPEG Progressive 1024 x 768 Other Restrictions e CMYK YCCK Color space JPEG are not supported Playing Multiple Files E Playing selected video music photo files 1 On the File List screen highlight a file and then press the Yellow button on your remote 2 Repeat Step 1 to se
6. 1024 x 768 56 476 70 069 75 000 1024 x 768 60 023 75 029 78 750 VESA DMT 1152x864 67 500 75 000 108 000 1280 x 720 45 000 60 000 74 250 1280 x 800 49 702 59 810 83 500 l 1280 x 1024 63 981 60 020 108 000 1280 x 1024 79 976 75 025 135 000 1366 x 768 47 712 59 790 85 500 1440 x 900 55 935 59 887 106 500 I 1600 x 900RB 60 000 60 000 108 000 1680 x 1050 65 290 59 954 146 250 I 1920 x 1080 67 500 60 000 148 500 If the TV seems to have a problem first review this list of possible problems and solution If none of these troubleshooting tips apply visit samsung com then click on Support or call Samsung customer service at 1 800 SAMSUNG Possible Solution If your Samsung Television is flickering or dimming sporadically you may need to disable some of its energy efficient features like the Eco Sensor or the Energy Saving feature Follow the steps below with your remote to turn these features off or on e Energy saving Menu Setup Eco Solution Energy Saving Select Settings e Eco Sensor Menu gt Setup Eco Solution Eco Sensor Select Settings Component Connections Screen Color If you find that the color on your Samsung television s screen is not correct or black and white first run a Self Diagnosis Test on the TV to make sure there are no device issues e Self Diagnosis User Menu gt Support Self Diagnosis Picture Test e If the test is ok try making sure
7. First perform the Picture Test and to see if your TV is displaying the test image properly Go to MENU Support Self Diagnosis Picture Test If the test image is properly displayed the poor picture may be caused by the source or signal The TV image does not look as good as it did in the store e f you have an analog cable satellite box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality Cable Satellite subscribers Try HD channels from the channel line up e Air Cable Antenna connection Try HD channels after running Auto Program Bq Many HD channels broadcast up scaled SD Standard Definition content The picture quality of up scaled SD content is low e Adjust the Cable Set top box video output resolution to 1080i or 720p The picture is distorted macroblock error small block dots pixelization e Compression of video contents may cause picture distortion especially on fast moving pictures such as those in sports and action movies e A weak signal can cause picture distortion This is not a TV problem e Mobile phones used close to the TV within 3 3ft may cause noise in the picture on analog and digital channels Color is wrong or missing e If you re using a component connection make sure the component cables are connected to the correct jacks incorrect or loose connections may cause color problems or a blank screen There is poor co
8. 264 1920x1080 6 30 30Mbps Pro Videos ts MPEG2 1920x1080 6 30 30Mbps we Ts MP3 FP Movie ot av E tp Pre 1 1920x1080 6 30 30Mbps DD m2ts HE AAC a MPEG1 1920x1080 24 25 30 30Mbps aca mpg PS MPEG2 1920x1080 24 25 30 30Mbps MPEG mpeg H 264 BP LPCM vob 1920x1080 6 30 30Mbps AAC MP HP MPEG4 SP 1920x1080 6 30 30Mbps 3gp 3GPP ASP MP3 A F H 264 1920x1080 6 30 30Mb 4 Pause lt gt Jump 1 Tools 5 Return Z Bs H 264 1920x1080 6 30 30Mbps 1 In the Media Play menu press the lt or gt button to select ai flash S Videos and then press the ENTER C button Swi formats H 263 2 Press the lt gt A buttons to select a video in the file list 3 Press the ENTER C4 button or gt Play button The file name is displayed on the top of the screen with the playing time If video time information is unknown playing time and the progress bar are not displayed MP3 1920x1080 6 30 30Mbps During video playback you can search using the lt and gt buttons amp In this mode you can play movie clips contained in a game but you cannot play the game itself Other Restrictions e Video content will not play or not play correctly if there is an error in the content or the container Sound or video may not work if the contents have a standard bit rate frame rate above the compatible Frame sec listed in the S
9. 3 Turns the TV on and off automatically at times and days you select You can set three different on off timer settings amp You must set the clock first E On Time Off Time Set the hour minute am pm and Activate Inactivate fields for the On Time and Off Time Use the lt gt buttons to move from field to field Use the A buttons to change the values in each field To activate the timer with the setting you have chosen set the Activate Inactivate field to Activate E Volume Set the desired loudness E Contents To select what will be turned on when the timer setting is activated You can set the TV to turn on a specific channel or play back contents such as photo or audio files Use the lt gt buttons to move to move to the Contents field and then press the ENTER C button The Contents screen appears Use the lt P buttons to move from field to field Use the A buttons to change the values in each field TV USB Select TV or USB The USB device must be connected to your TV before you can select USB Antenna Displays the current antenna source Air or Cable Channel If you have selected TV select the desired channel Music Photo If you have selected USB follow these steps to select a folder containing MP3 Music or JPEG Photo files on the USB device amp The maximum displayed number of files including sub folders in one folder of USB storage device is 2000 amp The media may not be playin
10. Channels list E FH Added Channels Shows all Added Channels These are the channels that appear when you press the CH button E Y Favorite Shows all favorite channels Programmed Shows all channels and programs currently scheduled using Timer Viewing amp Remote control buttons active on the Channel List screen Green Zoom Enlarges or shrinks a channel number Yellow Select Move the cursor to a channel Press the Yellow button to select the channel A v mark appears Repeat to select additional channels Then open the Tools menu and apply a function to the channels you selected 4 Tools Displays the Channel List Tools menu The Tools menus may differ depending on the situation Display Icons Used in the Channel List Screens Icons Meaning Vv A selected channel Y A Favorite channel A reserved program A program currently being broadcast A The Channel List Tools Menu The Channel List Tools menu contains most of the functions you can use on the All Channel Added Channels and Favorite List screens To view select a list screen select a channel and then press the TOOLS button E Add Delete Delete a channel from or add a channel to the Added Channels list To delete channels from the Added Channels list follow these steps 1 Select one or more channels in the Added Channels list using the A buttons and the Yellow Select button on your remote 2
11. MENU button Then press the A or Y button to select Application on the left and then press the ENTER Ce button 2 Press the A or V button to select Media Play USB and then press the ENTER C button 3 Press the lt or gt button to select an icon Videos Music Photos Settings and then press the ENTER C button amp Media Play might not work properly with unlicensed multimedia files amp Need to Know List before using Media Play USB The file system supports FAT16 FAT32 and NTFS Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives and Flash Card Readers Devices should be connected directly to the TV s USB port USB HDD is not supported Before connecting your device to the TV please back up your e Supported Subtitle Formats files to prevent them from damage or loss of data SAMSUNG is Ext not responsible for any data file damage or data loss xtema A USB device that requires high power more than 0 5A may not Name File extension be supported MPEG 4 timed text ttxt Do not disconnect the USB device while it is loading SAMI smi The higher the resolution of the image the longer it takes to SubRip a display on the screen San a The max
12. Press the TOOLS button on your remote The Tools menu appears 3 Select Delete in the Tools menu and then press the ENTER C button To add channels to the Added Channels list follow these steps 1 Select one or more channels in the All Channels list using the A V buttons and the Yellow Select button on your remote 2 Press the TOOLS button on your remote The Tools menu appears 3 Select Add in the Tools menu and then press the ENTERC button amp All deleted channels will be shown on the All Channels list You add channels back to the Added Channels list on the All Channels list amp A gray colored channel indicates the channel has been deleted from the Added Channels list amp The Add menu option only appears for deleted channels E Add to Favorite Delete from Favorite Lets you add channels to and delete channels from your Favorites list To add channels to the Favorites list follow these steps 1 Select one or more channels in the All Channels list using the A V buttons and the Yellow Select button on your remote 2 Press the TOOLS button on your remote The Tools menu appears 3 Select Add to Favorite in the Tools menu and then press the ENTER 4 button To delete channels from the Favorites list follow these steps 1 Select one or more channels in the Favorite Channels list using the A buttons and the Yellow Select button on your remote 2 Press the TOOLS button on your remote The Too
13. and the Symbol together are registered 2 0 Diaital Out trademarks amp DTS 2 0 Digital Out is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved E J mil The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Open Source License Notice Open Source used in this product can be found on the following webpage http opensource samsung com Open Source License Notice is written only English To send inquiries and requests for questions regarding open sources contact Samsung via Email oss request samsung com This product uses some software programs which are distributed under the Independent JPEG Group ICU License ICU 1 8 1 and later COPYRIGHT AND PERMISSION NOTICE Copyright c 1995 2008 International Business Machines Corporation and others All rights reserved Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute and or sell copies of the Software and to permit persons to whom the Software is furnished to do so provided that the above copyright notice s and this permission notice appear in all copies of the Software and that both the abov
14. picture Picture Reset E Picture Reset Reset Picture Mode Cancel Resets the picture settings to their factory defaults Mode E Standard Selects the normal sound mode E Music Emphasizes music over voices E Movie Provides the best sound for movies E Clear Voice Emphasizes voices over other sounds E Amplify Increase the intensity of high frequency sounds to allow a better listening experience for the hearing impaired Equalizer Available in Standard sound mode only E Balance L R Adjusts the balance between the right and left speaker E 100Hz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment Adjusts the loudness of specific bandwidth frequencies E Reset Resets the equalizer to its default settings SRS TruSurround HD Available in Standard sound mode only SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5 1 multichannel content through two speakers TruSurround delivers a compelling virtual surround sound experience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats 16 9 Wide Fit 4 3 Screen Fit Preferred Language Digital channels only Digital TV broadcasts can transmit many audio tracks simultaneously for example simultaneous translations of a program into foreign languages amp You can only select a language from among the ones being broadcast Multi Tr
15. re run the channel memorization function without having to re run the Plug amp Play procedure Antenna Air Cable Before your television can memorize the available channels you must select your TV s signal source Air using an antenna or Cable Select Menu gt Channel gt Antenna gt Air or Cable After you have selected the signal source go on to the Auto Program function amp Selecting the signal source using the Antenna function also determines the signal source the TV is tuned to For example if you receive your TV signal over the air and you select Cable you will see only snow You must select Air to see a picture Auto Program The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List To start Auto Program follow these steps 1 Push MENU Channel Auto Program ENTER C on your remote The Antenna Source screen appears 2 On the Antenna Source screen select the source of your TV signal Air If your TV is connected to an antenna choose Air and then press ENTERC The TV will automatically start memorizing channels Cable If your TV is connected to a cable outlet choose Cable and then press ENTERC Go to Step 3 Auto If you choose Auto and then press ENTER C4 the TV will automatically select the correct Antenna source Go to Step 3 On the Cable Type screen use the lt gt A buttons to select
16. size to Vv TV set For wall mounts that do not comply with the VESA standard Picture Mode You can adjust the picture setting YW v screw specifications the length of the screws may differ Auto Motion You canerihance motion in fast depending on the wall mount specifications Plus moving scenes v Do not fasten the screws too firmly This may damage the 7 7 product or cause the product to fall leading to personal injury Sound Mode You can adjust the sound setting y MA v Samsung is not liable for these kinds of accidents You can play the video with Samsung is not liable for product damage or personal injury eked PON me uneton ony wore v when a non VESA or non specified wall mount is used or the name as the video consumer fails to follow the product installation instructions You can select the digital audio Do not mount the TV at more than a 15 degree tilt Audio Format output format v Always have two people mount the TV on a wall Audio pirat Prop ine ADAD Jf Product TV size in VESA screw hole specs Standard Quantity Language than one language Family inches A B in millimeters Screw Stop Slide 19 22 75X75 Show You can start or stop a Slide M4 Start Slide Show v 26 100 X 100 Show LED TV 4 200 X 200 M6 Slide Show You can select the slide show Speed speed during the slide show v 400 X 400 M8 You can set and select Fecrground background music when Vv watching a Slide Show Do not install your Wall Mount Kit while Z
17. so that the brackets on the wall are at the same height or lower than the brackets on the TV Untie the string or cable before moving the TV amp To purcase a TV Holder kit contact Samsung customer care offs Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the system when using it in a public place Refer to the manual provided with the Kensington Lock for additional Mods information on proper use amp Please find a R icon on the rear of the TV The Kensington slot is beside the fg icon amp The position and color may differ depending on the model Holder stand Display Modes HDMI DVI Input Optimal resolution is 1920 x 1080 60Hz Assembling the Wire Troubleshooting Problem Flickering and Dimming Resolution Horizontal Vertical Pixel Clock Sync Polarity Frequency KHz Frequency Hz Frequency MHz H V Si 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 l 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 H 1152x870 68 681 75 062 100 000 H 640 x 480 31 469 59 940 25 175 H 640 x 480 37 861 72 809 31 500 H 640 x 480 37 500 75 000 31 500 H 800 x 600 37 879 60 317 40 000 miT 800 x 600 48 077 72 188 50 000 800 x 600 46 875 75 000 49 500 N 1024 x 768 48 363 60 004 65 000 H
18. the type of digital and analog cable systems you have STD HRC or IRC Most systems are STD Standard When done select Start and then press ENTER C The TV will start memorizing channels amp Channel memorization can take up to 45 minutes depending on your cable system amp Memorized channels are added to the Added Channels list These are the channels you will see when you use the Channel buttons on your remote Clear Scrambled Channel This function filters out scrambled channels after Auto Program is completed This process may take up to 20 30 minutes amp Press the ENTER G button to stop the Clear Scrambled Channel amp This function is only available in Cable mode w Managing Channels Channel List See your list of Added channels Favorite channels or channels you ve scheduled for viewing Add or delete Favorite channels add or delete channels from the Added Channels list schedule channels or programs for viewing Watch a channel by selecting the channel in the All Channels Added Channels or Favorite screen pressing the A Y buttons and then pressing the ENTER C button gt a 2 amp a Q gt B 5 om i Zoom Select 4 Tools Next Program Channel List Screens icons are listed on the left side Select an icon using the A V buttons to view each list E amp All Channels Shows all currently available channels including those you deleted from the Added
19. to other building materials please contact your nearest dealer If you install the TV on a ceiling or slanted wall it may fall and result in severe personal injury A the TV to fall In particular ensure that your children do not hang over or destabilize the TV doing so may cause the TV to tip over resulting in serious injuries or death Follow all safety precautions provided on the included Safety Flyer For added stability install the anti fall device for safety purposes as follows To prevent the TV from falling amp Since the necessary brackets screws and string or cable are not supplied please purchase these separately 1 Insert the screws into the wall brackets and firmly fasten them to the wall Make sure the screws are firmly fixed to the wall amp We strongly recommend you drive the screws into a stud 2 Using screws insert the screws through the TV brackets and then fasten the screws to the top VESA screw holes on the back of the TV 3 Connect the brackets on the TV and the brackets on the wall with a strong string or cable and then tie the string or cable tightly to the brackets amp Verify all connections are properly secured Periodically check the connections for any sign of fatigue or failure If you have any doubt about the security of your connections contact a professional installer amp Install the TV close to the wall so that it does not fall amp Connect the string or cable
20. H6050 Display Resolution 1920 x 1080 i 40 Class 46 Class 50 Class 55 Class 60 Class Screen Size Diagonal 40 0 measured 45 9 measured 49 5 measured 54 6 measured 60 0 measured g diagonally diagonally diagonally diagonally diagonally Sound Output 10Wx2 Dimensions W x D x H Body 36 5 X 3 6 X 21 8 inches 41 7 X 3 7 X 24 7 inches 44 7 X 3 7 X 26 5 inches 49 2 X 3 7 X 28 9 inches 54 0 X 3 7 X 31 7 inches 927 6 X 93 3 X 555 5 1059 8 X 94 3 X 629 4 1137 6 X 94 5 X 673 4 1250 6 X 94 3 X 735 7 1374 1 X 94 3 X 807 0 mm mm mm mm mm With stand 36 5 X 8 9 X 23 8 inches 41 7 X 8 9 X 26 7 inches 44 7 X 8 9 X 28 5 inches 49 2 X 8 9 X 31 0 inches 54 0 X 12 9 X 33 8 inches 927 6 X 227 6 X 606 5 1059 8 X 227 6 X 680 3 1137 6 X 227 6 X 725 0 1250 6 X 227 6 X 789 2 1374 1 X 329 8 X 859 0 mm mm mm mm mm Weight Without Stand 20 2 lbs 9 2 kg 26 4 Ibs 12 0 kg 34 3 Ibs 15 6 kg 45 6 lbs 20 7 kg 54 6 Ibs 24 8 kg With Stand 24 6 Ibs 11 2 kg 30 8 Ibs 14 0 kg 40 1 Ibs 18 2 kg 51 3 Ibs 23 3 kg 60 4 Ibs 27 4 kg amp Design and specifications are subject to change without prior notice amp This device is a Class B digital apparatus amp For information about power supply and more about power consumption refer to the label attached to the product amp Typical power consumption is measured according to Energy Star Program requirements for Televisions
21. Off User Menu Setup Eco Solution Auto Power Off 24 Be Trouble Powering On Before you turn the TV on find the red light on the right or left bottom of your TV Press the power on button on the TV or remote and the light should blink about 5 times before the TV turns on If you find that you are having trouble powering on your Samsung television there are a number of things to check it before making a call to the service department e If you happen to be using the TV as a monitor and the stand by light only blinks for a few seconds when you press the power button your PC is in sleep mode To take your PC out of sleep mode press a key on your keyboard or move the mouse Then try turning your TV on If you re sure your power cord remote control and PC are functioning properly you may be having a cable issue If you have a cable or satellite box your TV may appear to be off because the cable or satellite box is not outputting a signal To test the signal output of your cable or satellite box press the guide or info button on the cable or satellite box remote control If the screen displays the guide or info data the problem is caused by the box Stand Assembly e f you have any trouble assembling the stand refer to Install the Stand in the Start Up or Stand Installation Guide Cannot find a channel e Re run Plug amp Play or run Auto Program go to MENU Channel Auto Program Poor Picture
22. Standard Font Style Options include Default and Styles 0 to 7 The default is Style 0 Foreground Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the color of the letters The default is White Background Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the background color of the captions The default is Black Foreground Opacity This adjusts the opacity of text Options include Default Transparent Translucent Solid and Flashing Background Opacity This adjusts the opacity of the caption background Options include Default Transparent Translucent Solid and Flashing Return to Default This option sets each Size Font Style Foreground Color Background Color Foreground Opacity and Background Opacity to its default amp Digital Caption Options are available only when you can select Default and Service1 Service6 in Caption Mode amp The Foreground and Background cannot be set to the same color Melody Lets you control whether a melody plays when the TV is turned on or off amp The Melody does not play When no sound is output from the TV because the MUTE button has been pressed When no sound is output from the TV because the volume has been reduced to minimum with the VOL button When the TV is turned off by the Sleep Timer function Auto Protection Time E Auto Protection Time Off 10 mi
23. ack Sound MTS Analog channels only E Mono Select for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal E Stereo Select for channels that are broadcasting in stereo E SAP Select to listen to the Separate Audio Program which is usually a foreign language translation amp Depending on the program being broadcast you can listen to Mono Stereo or SAP Auto Volume Because each station has its own broadcasting conditions the volume may fluctuate each time you change the channel This feature automatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low SPDIF Output The SPDIF Sony Philips Digital InterFace outputs an uncompressed digital audio signal when you connect the digital audio jack on the back of the TV to a digital audio in jack ona receiver or home theater E Audio Format PCM Dolby Digital You can select the Digital Audio output SPDIF format The available Digital Audio output format may differ depending on the input source amp By connecting the TV to a receiver or home theater with Dolby Digital and 5 1ch speakers and selecting Dolby Digital you can maximize your interactive 3D sound experience E Audio Delay Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio ou
24. e copyright notice s and this permission notice appear in supporting documentation THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Except as contained in this notice the name of a copyright holder shall not be used in advertising or otherwise to promote the sale use or other dealings in this Software without prior written authorization of the copyright holder All trademarks and registered trademarks mentioned herein are the propert Q their respective owners 15 Specifications Ch Environmental Considerations Operating Temperature Operating Humidity Storage Temperature 50 F to 104 F 10 C to 40 C 10 to 80 non condensing 4 F to 113 F 20 C to 45 C Storage Humidity 5 to 95 non condensing veao UN40EH6000 UN46EH6000 UNSOEH6000 UNSSEH6000 UN60EH6000 UN40EH6050 UN46EH6050 UNS50EH6050 UNS55EH6050 UN60E
25. fer picture sizing features use these controls to view different formats as a full screen picture Be careful in the selection and duration of television formats you use for viewing Uneven LED aging as a result of format selection and use as well as burned in images are not covered by your Samsung limited warranty e SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements conditions exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics SAMSUNG products and the requirements conditions exclusions and limitations contained herein SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada and in Canada on SAMSUNG products purchased in the United States for the warranty period originally specified and to the Original Purchaser only The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center Along with this Statement the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center BN68 04500A 00 Transportation to and from the Service Center is the responsibility of the purchaser Conditions covered are limited only to manufacturing defects in material or workmanship and only those encountered in normal use of the product Excluded but not limited to are any originally specified provi
26. ffer a more precise picture with more precise controls amp When your TV is connected to a PC you can only make changes to Gamma and White Balance E Color Space Auto Native Auto automatically matches the range of colors available to create pictures to the color range of the video source Native provides a color range wider than the color range of the video source E White Balance Adjusts the color temperature of the picture so that white objects look white instead of for example slightly pink or slightly yellow and the overall color of the picture looks natural R Offset G Offset B Offset Adjusts each color s red green blue darkness R Gain G Gain B Gain Adjusts each color s red green blue brightness Reset Resets the White Balance to it s default settings E Gamma Adjusts the primary color intensity E Dynamic Contrast Off Low Medium High Adjusts the screen contrast E Black Tone Off Dark Darker Darkest Selects the black level to adjust the screen depth Darker settings make blacks look darker E Flesh Tone Adjusts the amount of red in skin tones E Motion Lighting Off On When on the TV automatically adjusts the brightness of the screen in response to the brightness of the room In bright light the screen brightens In dim light the screen dims amp Available in Standard mode only Picture Options amp When the TV is connected to a PC you can only make chan
27. g smoothly when using the device lower than USB 2 0 1 Use the lt gt buttons to move to the field under Music or the field under Photo and then press the ENTERC button The TV displays a single folder the Root folder and the type or name of the device 1 Press the ENTER appears C button A list of folders on the device amp If there are no folders on your device press the Yellow select button to select the Root folder and then press the RETURN button The Timer screen re appears 2 Use the A V buttons to highlight a folder that contains music or photos and then press the Yellow select button o select the folder 3 Press the RETURN button The Timer screen re appears E Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual If you select Manual you can select the days you want to activate the timer by using the lt P buttons to highlight the day and then pressing the ENTER C button To unselect a day highlight it and then press the ENTER C button When you finished making all your selections on the Timer screen press either the ENTER C or RETURN button Q Other Features Program Rating Lock The Program Rating Lock feature lets you block programs you ve determined are inappropriate for your children based on the program s ratings To access the Program Rating Lock feature and make any changes you must enter a PIN personal identification number To watc
28. ges to the Color Tone Size and HDMI Black Level E Color Tone Cool Standard Warm1 Warm2 Cool makes the picture bluer cooler Warm 1 and Warm 2 make the picture redder warmer amp Warm1 and Warm2 are deactivated when the picture mode is set to Dynamic E Size Set the size and aspect ratio of the picture on the screen Your cable box or satellite receiver may have its own set of screen sizes as well However we highly recommend you use the TVs 16 9 mode most of the time 16 9 Sets the picture to the 16 9 wide screen format Zoom1 Provides moderate magnification of the picture Sides top and bottom are cut off Zoom2 Provides larger magnification of the picture Sides top and bottom are cut off Wide Fit Enlarges the aspect ratio of the picture so the picture fits the entire screen 4 3 Sets the picture to the old 4 3 format and puts black or gray borders on the right and left of the picture amp Do not watch your TV in the 4 3 format for a long time Traces of borders displayed on the left right and center of the screen may cause image retention screen burn which is not covered by the warranty Screen Fit Displays the full image without any cut off when your TV is inputting HDMI 720p 1080i 1080p or Component 1080i 1080p HD signals amp HD High Definition has a 16 9 aspect ratio and 1080i 1080p 1920x1080 or 720p 1280x720 resolution amp You can adjust and store settings for eac
29. h a blocked program you must also enter the same PIN amp Program Rating Lock is not available in HDMI or Component mode amp The default PIN number of a new TV set is 0 0 0 0 You can set your own PIN using the Change PIN function How It Works When you access the Program Rating Lock Menu functions for the first time the PIN input screen appears Enter 0 0 0 0 The PIN screen closes and the Program Rating Lock Menu appears Every time you access the Program Rating Lock functions the PIN screen will appear and you must enter a PIN When the Rating Lock screen appears select Program Rating Lock and then press ENTER C4 Select On and then press the ENTER key again Depending on what type of programs or movies you want to block select one of the options on the screen and then press the ENTER E TV Parental Guidelines You can block TV programs based on their ratings This function allows you to control what your children are watching E MPAA Rating You can block movies based on their MPAA ratings The Motion Picture Association of America MPAA has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children E Canadian English You can block TV programs based on their Anglophone Canadian ratings E Canadian French You can block TV programs based on their French Canadian ratings E Downloadable U S Rating Parental restriction informa
30. h external device you have connected to an input on the TV Picture Sizes available by Input Source are listed below Input Source Picture Size ATV AV Component 480i 480p i Zoom1 Zoom2 DTV 1080i 1080p Component 1080i 1080p HDMI 720p 1080i 1080p E Digital Noise Filter Off Low Medium High Auto If the broadcast signal received by your TV is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen amp When the signal is weak try all the Digital Noise Filter options until the TV displays the best picture E HDMI Black Level Normal Low For HDMI signals select the black level to adjust the screen depth Low make blacks look darker amp Available only in HDMI mode RGB signals E Film Mode Off Auto Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality amp Available in ATV DTV interlace AV COMPONENT 480i 1080i and HDMI 480i 1080 E Auto Motion Plus Off Clear Standard Smooth Custom Demo Enhances motion in fast moving scenes amp The info screen on your TV displays the resolution and frequency of the incoming video signal 60Hz This displayed frequency is not what the TV is displaying by using the Auto Motion Plus function E LED Motion Plus Off On Removes drag from fast scenes with a lot of movement to provide a clear
31. he ENTER C button on your remote when done amp Only Added Channels can be scheduled amp Scheduled programs and channels are displayed in the Programmed List amp When you select a digital channel press the gt button to view the digital program list If you highlight a program in the list and then press the ENTERC Schedule button you set Timer Viewing for that program directly E Select All Select all the channels in the displayed channel list E Deselect All Deselect all the selected displayed channels amp You can only select Deselect All when one or more channels are selected E Channel Name Edit Analog channels only Lets you assign a name of up to five characters to an analog channel For example Hist Food Golf etc This makes it easier to find and select a channel E Auto Program See Auto Program under Memorizing Channels Programmed List on the Channel List Screen The Programmed list displays the channels and programs you have scheduled for viewing using the Time Viewing function You can view modify or delete a show you have scheduled using the functions on the Programmed List screen Tools menu Programmed List Screen Tools Menu E Change Info Change the scheduling in channel you have scheduled To change the information follow these steps 1 Select the Programmed List icon on the left side of the Channel List screen and then press the ENTER C button 2 On the Programmed List
32. ime you set will appear when you press the INFO button E Clock Set the clock so you can use the various timer features of the TV amp If you disconnect the power cord you have to set the clock again To set the clock follow these steps 1 Select Setup gt Time gt Clock 2 Press ENTER C and select Auto or Manual and then press ENTER C again If you selected Auto The TV will automatically download the correct time from a digital channel e Select Time Zone and then press the ENTER C button Use the A V buttons to select your Time Zone and then press ENTERC e Select DST Daylight Savings Time and then press ENTER C4 Select On if you want to turn the DST adjustment on and off manually Select Off to turn off the DST adjustment Select Auto if you want the TV to adjust to DST automatically Press ENTER C when done amp DST and Time Zone function are only available when the Clock Mode is set to Auto If you selected Manual The Clock Set screen appears Use the A buttons to change the values in each field or use the number buttons to enter the values directly Use the lt P buttons to move from field to field When done with all the fields press ENTER C amp Available only when Clock Mode is set to Manual E Sleep Timer Automatically shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes amp To cancel the Sleep Timer select Off Timer 1 Timer 2 Timer
33. imum supported JPEG resolution is 15360 x 8640 pixels peels 2 Ifa file is corrupted or the TV does not support the file type the Micro DVD subior bd Not Supported File Format message appears SubStation Alpha ssa The TV cannot play MP3 files with DRM that have been Advanced SubStation Alpha ass downloaded from a for pay site Digital Rights Management DRM is a technology that supports the creation distribution Internal and management of digital content in an integrated and Name anlar nma comprehensive way including protecting the rights and interests of content providers preventing illegal copying of contents and Xsub AVI Picture Format managing billing and settlements SubStation Alpha MKV Text Format PTP devices are not supported Advanced SubStation Alpha MKV Text Format If an over power warning message is displayed while you are SubRip MKV Text Format connecting or using a USB device the device may not be EATI urA Aoma recognized or may malfunction SA Faldita If the TV has no input during the time period set in Auto e Supported Video Formats Protection Time the Screensaver will run le The power saving mode of some external hard disk drives may Extension Container Video Codec be released automatically when your connect them to the TV R Frame Bit Audio Resolution rate fps rate Mbps Codec A DivX If you use a USB e
34. issue Replace the Component video cables with an HDMI connection The picture will not display in full screen e HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents e Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the TV e Adjust the picture size option on your external device or change the TV to full screen The remote control does not work e Replace the remote control s batteries Make sure you insert them with the polarity correct e Clean the transmission window located on the top of the remote control e Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control does not turn the TV on or off or adjust he volume e Program the Cable Set top box remote control to operate the TV Refer to the Cable Set top box user manual for he SAMSUNG TV code A Mode Not Supported message appears Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to resolution settings in this manual Caption on the TV menu is greyed out You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component e Caption must be activated on the external device There is a plastic smell from the TV e This smell is normal and will dissipate in a few days
35. lect multiple files amp NOTE AY mark appears to the left of the selected files To cancel a selection press the Yellow button again To deselect all selected files press the TOOLS button select Deselect All and then the ENTER C4 button 3 Press the TOOLS button select Play Selected Contents and then press the ENTER C button E Playing a video music photo folder 1 With the folders on your USB device displayed use the lt gt A buttons to highlight a folder 2 Press the TOOLS button select Play Folder and then press the ENTER C4 button Media Play Additional Functions E Videos Music Photos Play Option menus amp NOTE Standard dimensions for wall mount kits are shown in the table below When playing a file press the TOOLS button When purchasing our wall mount kit a detailed installation Category Operation veS Il Mane Eee manual and all parts necessary for assembly are provided Vou Gan saleat another vid o Fle Do not use screws that do not comply with the VESA standard Title to play directly v screw specifications V i ead 5 Do not use screws that are longer than the standard dimension Repeat Mode files repeatedly angmusie vV v or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the Picture Size e ea e picture
36. lor or brightness e Adjust the Picture options in the TV menu go to Picture Mode Color Brightness Sharpness e Adjust the Energy Saving option in the TV menu go to MENU Setup Eco Solution Energy Saving Try resetting the picture to the default picture settings go to MENU Picture Picture Reset There is a dotted line on the edge of he screen e f the picture size is set to Screen Fit change it to 16 9 e Change the cable satellite box resolution The picture is black and white e If you are using an AV composite input connect the video cable yellow to the Green jack of Component Input 1 on the TV When changing channels the picture reezes or is distorted or delayed e f connected to a cable box please try to reset it Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes e Set the output resolution of the cable box to 1080i or 720p Sound Problems Perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis Sound Test If the audio is OK the sound problem may be caused by the source or signal There is no sound or the sound is too low at maximum volume e Check the volume of the device Cable Sat Box DVD Blu ray etc connected to your TV The picture is good but there is no sound e f you are using an external device check the device s audio output option Ex yo
37. ls menu appears 3 Select Delete from Favorite in the Tools menu and then press the ENTER C4 button E Timer Viewing You can schedule a channel to be displayed automatically at a set time even when you are watching another channel You must set the current time first in the Time gt Clock function to use Time Viewing To schedule a channel follow these steps 1 Select a channel in the Added Channels list using the A V buttons and the Yellow Select button on your remote 2 Press the TOOLS button on your remote The Tools menu appears 3 Select Time Viewing in the Tools menu and then press the ENTER C button The Time Viewing screen appears Timer Viewing y Once 01 01 2012 4 gt Move Adjust 12 01 am C Enter 9 Return 4 Use the lt gt buttons to move from entry field to entry field and the A buttons to change the entries Where numbers are displayed you can also enter numbers directly using the number keypad on your remote amp If you select Everyday or Every Week the date you select in the Date field becomes the start date for your scheduled viewing For Everyday the TV will turn on every day at the time you selected starting from that date For Everyweek the TV will turn on every week on the same day of the week as the start date you selected at the time you selected from that day on If you select Once the TV will turn on once on the date and time you selected 5 Press t
38. n 20 min 40 min 1 hour If the screen remains idle with a still image for a certain period of time you define the screen saver is activated to prevent the formation of ghost images on the screen Eco Solution E Energy Saving Off Low Medium High Picture Off This adjust the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen E Eco Sensor Off On To enhance your power savings the picture settings will automatically adapt to the light in the room amp If you adjust the Backlight the Eco Sensor will be set to Off Min Backlight When Eco Sensor is On the minimum screen brightness can be adjusted manually amp If Eco Sensor is On the display brightness may change become slightly darker in most cases depending on the surrounding light intensity E No Signal Power Off Off 15 min 30 min 60 min Sets how quickly the TV switches to standby mode if no picture is being received amp Disabled when the PC is in power saving mode E Auto Power Off Off On The TV will be automatically turned off when no user operation is received for 4 hours Support Menu tN Self Diagnosis E Picture Test Use to check for picture problems If the problem appears in the test picture select Yes and follow the directions on the screen E Sound Test Use the built i
39. n melody sound to check for sound problems If the problem occurs during the test select Yes and follow the directions on the screen E Signal Strength Digital channels only An HD channel s reception quality is either perfect or the channels are unavailable Adjust your antenna to increase signal strength E Reset Reset all settings to the factory defaults amp The PIN input screen appears before the setup screen amp Enter your 4 digit PIN Change the PIN using the Change PIN option Software Upgrade Software Upgrade can be performed by downloading the latest firmware from samsung com to a USB memory device HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centers and how to download products and software MediaPlay Enjoy photos music and or movie files saved on a cn USB Mass Storage Class MSC device Q Connecting a USB Device 1 Turn on your TV 2 Connect a USB device containing photo music and or movie files to the USB jack on the back of the TV A pop up window appears Press the MEDIA P button on your remote The Media Play menu appears Q Using the Media Play Menu Media Play Videos GA C Enter D Return To open Media Play in the Menu follow these steps 1 Press the
40. nada Inc Customer Service 55 Standish Court Mississauga Ontario L5R 4B2 Canada Samsung Electronics America Inc 85 Challenger Road Ridgefield Park NJ 07660 2112 Address Customer Care Center amp Web Site 1 800 SAMSUNG 726 7864 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 www samsung com 1 1 OA A ae ot a 2012 Samsung Electronics Co Ltd All rights reserved The On Screen Menus I Your TV has two kinds of menus the Main menu and the various Tools menus The Main menu gives you access to most or all of the menu options available on your TV The Tools menus display a selected number of frequently used menu options that change depending on the screen you are viewing A Tools menu symbol 1 in the lower right side of the screen indicates that a Tools menu is available The Main menu has seven primary categories e Picture e Input e Sound e Application e Channel Support e Setup To view the Main menu press the MENU button on your remote To view a Tools menu press the TOOLS button on your remote amp The menu options that appear in the Main menu depend on the Source you have selected For example if you have selected the HDMI source the Channel category will not appear To see the Channel category you must first select TV in the Source List The Menu options are presented below arranged by Main menu categories A Tools button symbol ENS next to an
41. o the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV e Make sure your connected devices are powered on e Be sure to select the correct input source by pressing the SOURCE button on the remote control Reboot the connected device by reconnecting the device s power cable RF Cable Antenna Connection The TV is not receiving all channels Make sure the coaxial cable is connected securely Run Auto Program to add available channels to the channel list go to MENU Channel Auto program then select Auto and make sure the correct Cable TV signal type is set in the menu There are 3 options STD HRC and IRC Verify the antenna is positioned correctly No Caption on digital channels Check the Caption Setup menu Try changing Caption Mode Service 1 to CC1 e Some channels may not have caption data The picture is distorted macroblock error small block dots pixelization e Compression of video contents may cause picture distortion especially on fast moving pictures such as those in sports and action movies e A weak signal can cause picture distortion This is not a TV problem Others Purple green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection e Remove the left and right audio connections from the set top box If the buzzing stops this indicates that the set op box has a grounding
42. oom You can zoom into images in full your TV is turned on It may result in screen mode personal injury due to electric shock You can rotate images in full Rotate screen mode You can see detailed information i Information Pout the played fle viv Securing the TV to the Wall Settings Caution Pulling pushing or climbing onto the TV may cause Using the Setup Menu E DivX Video On Demand Shows the registration code authorized for the TV If you connect to the DivX web site and register with the 10 digit registration code you can download the VOD activation file Once you play it using Media Play the registration is completed amp For more information on DivX VOD visit http vod divx com E Information Select to view information about the connected USB device Other Information Installing the Wall Mount Kit The wall mount kit sold separately allows you to mount the TV on the wall For detailed information about installing the wall mount see the instructions provided with the wall mount items Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own Wall Mount Kit Specifications VESA amp The wall mount kit is not supplied but sold separately Install your wall mount on a solid wall perpendicular to the floor When attaching
43. option name indicates the option is also available in one of the Tools menus Mode Select your preferred picture mode amp When your TV is connected to a PC you can only select Entertain and Standard E Dynamic Brightens the screen Suitable for a bright room E Standard Suitable for a normal E Movie Darkens the screen making it less glary Suitable for watching movies in a darkened room E Entertain Sharpens the picture Suitable for games amp Only available when the TV is connected to a PC Backlight Contrast Brightness Sharpness Color Tint G R E Backlight Adjusts the brightness of the screen by adjusting the brightness of the individual pixels E Contrast Increases or decreases the contrast between dark and light areas of the picture E Brightness Adjusts the brightness of the screen Not as effective as Backlight E Sharpness Sharpens or dulls the edges of objects E Color Adjusts the color saturation The higher the Color setting the more intense the color Low settings remove color and the picture becomes black white and gray E Tint Adjusts the amount of green and red in the picture As you increase the amount of green the amount of red decreases and vice versa amp When the TV is connected to a PC you can only make changes to Backlight Contrast Brightness and Sharpness Advanced Settings Available in Standard and Movie mode only Compared to previous models new Samsung TVs o
44. rs trademarks of SRS Labs Inc i surround sound experience from the TV s built in TheaterSound TheaterSound technology is incorporated under Speakers while maintaining steady volume and licence from SRS Labs Inc delivering rich bass and clear dialog DI UX DivX Certified to play DivX video up to HD 1080p including premium content is a digital video format created by as subsidiary of Rovi Corporation This is an official Div Certified device that plays DivX video Visit divx com for more information and software tools to convert your files into DivX videos ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased Divx Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 DivX DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license CX DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of DIGITAL PLUS PULSE Dolby Laboratories Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and S dts worldwide patents issued amp pending DTS the Symbol amp DTS
45. screen select the show or channel entry you want to change and then press the TOOLS button The Tools Menu appears 3 Select Change Info and then press the ENTER The Time Viewing screen appears 4 Use the lt gt buttons to move from entry field to entry field and the A buttons to change the entries Where numbers are displayed you can also enter numbers directly using the number keypad on your remote 5 Press the ENTER C button when done E Cancel Schedules Cancel a show or channel you have scheduled To cancel a scheduled show or channel follow these steps 1 Select the Programmed List icon on the left side of the Channel List screen and then press the ENTER C button 2 On the Programmed List screen select the show or channel entry you want to cancel and then press the TOOLS button The Tools Menu appears 3 Select Cancel Schedules and then press the ENTER button The Cancel Schedule screen appears 4 Select OK and then press the ENTER C button formation for a show or button Ki E Information Display the information for a show or channel you have scheduled You can also change the schedule Information 1 Select the Programmed List icon on the left side of the Channel List screen and then press the ENTER C button 2 On the Programmed List screen select the show or channel entry you want information for and then press the TOOLS button The Tools Menu appears 3 Select Informa
46. sions for in home or on site services minimum or maximum repair times exchanges or replacements accessories options upgrades or consumables For the location of a SAMSUNG Authorized Service Center please call toll free In the United States 1 800 SAMSUNG 1 800 726 7864 In Canada 1 800 SAMSUNG Still image warning Avoid displaying still images such as jpeg picture files or still image elements such as TV channel logos TV shows or movies in panorama or 4 3 format stock or news scroll bars etc on the screen The constant display of still pictures can cause ghosting or image burn in image retention on the LED screen which will affect image quality To reduce the risk of this effect please follow the recommendations below Avoid displaying the same TV channel for long periods e Always try to display any image in full screen mode Use the TV s Picture Options menu to select the optimal screen size e Reduce brightness and contrast values to the minimum required to achieve the desired picture quality Values that exceed the minimum may speed up the burn in process e Frequently use all TV features designed to reduce image retention and screen burn in Refer to proper user manual section for details Contact SAMSUNG WORLDWIDE 1 If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center CANADA U S A Samsung Electronics Ca
47. tion and then press the ENTER C button The Time Viewing Information screen appears 4 Select Change Info and press the ENTER C button to change information or select Close and press the ENTER C button to close the Information screen E Select All Deselect All You can select or deselect all channels in the channel list Q Other Channel Menu Functions Channel Mode Added Channels Favorite Channels Lets you select the channel list displayed when you press the NCHY Channel button on your remote For example if you select Favorite Channels you will only see Favorite channels when you press the AACHY button Fine Tune Analog channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually amp Select the channel and then select Fine Tune amp Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset fine tuning select the channel select Fine Tune and then select Reset on the Fine Tune screen Plug amp Play Lets you re run the Plug amp Play initial setup procedure For instructions see your Quick Start Guide Language Set the menu language amp Choose between English Espa ol and Fran ais O Setting the Time Time amp The t
48. tion can be used while watching DTV channels button The options are listed below Locking Blocking Programs or Movies You lock or block programs and or movies in essentially the same way for each option Each option displays a grid or table All the tables have ratings listed on the left The TV Parental Guidelines option also has kinds of content listed across the top ALL Lock all TV ratings FV Fantasy violence V Violence S Sexual situation L Adult Language D Sexually Suggestive Dialog To lock block movies or shows with certain ratings and or kinds of content click the square next to the rating and or under the kind of content A lock appears To unlock unblock click the square again When you click a low rating all the ratings above it will also display locks You can also Allow All or Lock All When done press the RETURN button on your remote E Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them in Enter New PIN fields Re enter the same 4 digits in Confirm New PIN fields When the Change PIN screen disappears press the OK button The TV has memorized your new PIN amp If you forget the PIN press the remote control buttons in the following sequence which resets the pin to 0 0 0 0 POWER off MUTE 8 gt 2 gt 4 gt POWER on Game Mode On Off When you connect a game console such as a PlayStation or Xbox to your TV
49. tput from the TV through an external device such as an AV receiver When you select Audio Delay a slider appears Use the left and right arrow buttons to adjust the slider Press ENTER C when done Oms 250ms Speaker Settings E Speaker Select External Speaker TV Speaker If you are listening to the sound track of a broadcast or movie through an external receiver you may hear a sound echo caused by the difference in decoding speed between the TV s speakers and the speakers attached to your audio receiver If this occurs set the TV to External Speaker amp When you set Speaker Select to External Speaker the TV s speakers are turned off You will hear sound through the external speakers only When you set Speaker Select to TV Speaker both the TV s speakers and the external speakers are on You will hear sound through both When Speaker Select is set to External Speaker the VOLUME and MUTE buttons will not operate and the sound settings will be limited If there is no video signal both the TV s speakers and the external speakers will be mute Sound Reset E Reset All Resets all sound settings to the factory defaults amp amp Channel Menu 1 QO Memorizing Channels When you first set up your TV using Plug amp Play the TV memorized the channels that were available over the air or through your cable system and added them to the Channel List The Antenna and Auto program functions described below let you
50. u may need to change your cable box s audio option to HDMI if the box is connected to your TV using an HDMI cable e Reboot the connected device by reconnecting the device s power cable The speakers are making an inappropriate noise e Check the cable connections Make sure a video cable is not connected to an audio input e For Antenna or Cable connections check the signal information A weak signal may cause sound distortion e Perform the Sound Test as explained above No Picture No Video The TV will not turn on e Make sure the AC power cord is securely plugged into the wall outlet and the TV e Make sure the wall outlet is working e Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to Remote control does not work below The TV turns off automatically e Ensure the Sleep Timer is set to Off in the Time menu e If your PC is connected to the TV check your PC power settings e Make sure the AC power cord is plugged securely into the wall outlet and the TV e When you are watching TV connected to an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal a4 Bie There is no picture video Check the cable connections Remove and reconnect all cables connected to the TV and external devices e Set your external device s Cable Sat Box DVD Blu ray etc video outputs to match the connections t
51. upported Video Formats table e If the Index Table erroneous the Seek Jump function is not supported e The menu may take longer to appear if the video s bit rate exceeds 10Mbps e Video content can not be played if there are many contents in one file Video Decoder Supports up to H 264 Level 4 1 H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not supported MPEG4 SP ASP Below 1280 x 720 60 frame max Above 1280 x 720 30 frame max H 263 is not supported GMC is not support Audio Decoder Supports up to WMA7 8 9 STD 9 PRO 10 PRO WMA 9 PRO and WMA 10 PRO support 5 1 channel LBR mode of WMA Pro is not supported WMA Lossless is not supported Music 1 Love you C Pause lt gt Jump g3 Tools 5 Retum 1 In the Media Play menu press the lt or gt button to select Music and then press the ENTER C button 2 Press the lt gt A buttons to select the desired Music in the file list 3 Press the ENTER C button or gt Play button amp During music playback you can search using the lt and gt button 44 REW and play amp Media Play only displays files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB device amp Ifthe sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem
52. which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product amp Watch these troubleshooting on video at www samsung com spsn amp Some functions and pictures shown in this manual are available on specific models only amp You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site samsung com Support Downloads To upgrade download the firmware to your computer copy the firmware file to a USB memory stick insert the USB memory stick into the TV s USB slot and then select Support gt Software Upgrade in the TV s menu si s Storage and Maintenance amp Ifa sticker was attached to the TV screen some debris can remain after you remove the sticker Please clean it before watching the TV amp The exterior and screen of the product can get scratched during cleaning Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches 7 Clean the product with a soft cloth Do ma spray welia ey eno te dampened with in a small amount of product Any liquid that goes into the PN ao product may cause a failure fire or AS elise Dio not use ainei Evit electric shock e g benzene thinners or a cleaning agent License TheaterSound SRS and the symbol are i SRS TheaterSound provides the most immersive s
53. xtension cable the TV may not recognize the 3 11 4 x 5 1 1920x1080 6 30 30Mbps USB device or may not be able to read the files on the device 6 0 MP3 If a USB device connected to the TV is not recognized the list of mp4 MP4 H264 1920x1080 6 30 30Mbps ADPCM iles on the device is corrupted or a file in the list is not played AAC AVC 1920x1080 6 30 30Mb connect the USB device to a PC format the device and check as ps he connection MJPEG 640x480 6 30 10Mbps Ifa file you deleted from the PC is still found when you run Media Divx Play use the Empty the Recycle Bin function on the PC to 3 11 4 x 5 1 1920x1080 6 30 30Mbps yp3 permanently delete the file 6 0 AC3 iali avi AM LPCM Photos only supports the sequential jpeg format a sae era 1920x1080 6 30 30mbps appem The Videos option does not support the scene search and DTS humbnail functions H264 1920x1080 _6 30 30Mbps Core If the number of files and folders saved on a USB storage device is MJPEG 640x480 6 30 10Mbps over approximately 4000 the files and folders may not appear and DivX 3 14 MP3 some folders may not open 4x 5 1 1920x1080 6 30 30Mbps AC3 The maximum displayed number of files including sub folders in kas 16 0 LPCM one folder of USB storage device is 2000 SiTi ASF MPEG4 SP ADPCM i A f 1920x1080 6 30 30Mbps WMA The media may not be playing smoothly when using the device ASP 7 WMA lower than USB 2 0 H
54. you can enjoy a more realistic gaming experience by turning on the Game Mode function amp Precautions and limitations for game mode Before you disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly amp Game Mode is not available when the input source is set to TV amp After connecting the game console set Game Mode to On You may notice slightly reduced picture quality Caption On Screen Text Dialogue E Caption You can switch the caption function on or off If captions are not available they will not be displayed on the screen amp The Caption feature does not work in Component or HDMI mode E Caption Mode You can select the desired caption mode Default CC1 CC4 Text1 Text4 analog channels only The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV Depending on the broadcasting signal the Analog Caption function may or may not work with digital channels Default Service1 Service6 CC1 CC4 Text1 Text4 Digital channels only The Digital Captions function works with digital channels amp Service1 6 may not be available in digital caption mode depending on the broadcast E Digital Caption Options Digital channels only Size Options include Default Small Standard and Large The default is
Download Pdf Manuals
Related Search