CyberPower ENVIROSENSOR
Contents
1. CyberPower Reliability Quality Value Environment Sensor ENVIROSENSOR User s Manual K01 0000207 00 Overview The CyberPower environmental sensor ENVIROSENSOR along with select SNMP HTTP cards RMCARDXXxX or most Switched and Monitored PDUs enables users to monitor the temperature and humidity of a server closet and or datacenter remotely With CyberPower s PowerPanel Business Edition software users can establish thresholds that will automatically notify users when an event has occurred via email SMS and SNMP traps Additionally the ENVIROSENSOR provides 4 input dry contacts that enable users to monitor the status of connected devices such as door switch sensors Features include e Real time environment monitoring e Remote management and configuration of the sensor via Web Browsers or NMS e Automatic events notification via email SMS and SNMP traps e 4 input dry contacts application interface provided e Displays the name and location of the sensor and connected devices Product Features A LED B Input Dry Contact 1 4 C Common Connection D RJ45 Port connect to RMCARD PDU NOTE Please refer to Appendix for Input Dry Contact Application Copyright 2011 CyberPower Systems Inc Package Contents Hook and Loop Tape ENVIROSENSOR User s Manual OP CL CAT5 RJ45 Ethernet Cable 10 feet 3 05 m Flat Head Screw M3x20 with Plastic Nylon Anc2. UIPMENT SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT CyberPower yer Quality Value CyberPower North America CyberPower Systems USA Inc Phone 952 403 9500 Toll free 877 297 6937 4241 12th Avenue E Suite 400 Shakopee MN 55379 E mail tech cpsww com Website www CPSww com CyebrPower Europe CyberPower Systems Inc E mail sales cpsww eu Website www cpsww eu CyberPower Systems France Z Saint S verin 28220 CLOYES sur le Loir France T l 33 0 2 37 98 61 50 E mail sales cpsww com fr Copyright 2011 CyberPower Systems Inc
3. hor Technical Specification ENVIROSENSOR Input Voltage 7V 28V Halt mode 72 mW Normal mode 110 mW Default 12V input Power Dissipation Measurement Range and Accuracy 32 158 F with accuracy 1 8 F Temperature 0 70 C with accuracy 1 C Humidity 10 90 RH with accuracy 2 Communication Connection Port RJ45 Port Input Dry Contact 4 Physical 2 32 x 1 77 x 1 14 inches Dimensions L x W x H 59 x 45 X 29 mm Weight 1 46 oz 41 5g Safety Approvals FCC Class B CE C Tick Warranty 3 Year Limited Installation Guide Method 1 Hook and Loop Tape Mounting Step 1 Clean the surface of the area where the sensor will be installed Apply one side of the hook and loop tape to the bottom of the sensor and the other side to the sensor location Step 2 Attach the sensor on the surface and hold for about 5 seconds to ensure cohesion NOTE Once the sensor is installed you will want to leave it in place to ensure the the hook and loop tape maintains its adhesiveness Step 3 To connect the sensor with RMCARD PDU use the attached RJ45 Ethernet Cable Plug one end into the RJ45 Port and the other end into the RMCARD PDU NOTE If the distance of RMCARD PDU and the sensor is longer than 10 feet 3 05 m use a standard RJ45 Ethernet Cable as needed max 50 feet 15 m Method 2 Fixed Mounting Step 1 Step 2 S
4. ning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does not cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device compiles with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED TO THIS EQ
5. tep 3 Step 4 Drill a hole that is compatible with the anchor and insert the included anchor Insert and tighten the screw into the anchor Leave enough of the screw exposed for the sensor to be mounted to Hang the sensor horizontally or vertically a To connect the sensor Hole 6mm 0 24in aj with RMCARD PDU use the attached RJ45 Ethernet Cable Plug one end into the RJ45 Port and the other end into the RMCARD PDU For further configuration information please refer to the RMCARD PDU user s manual Troubleshooting Problem Solution The RMCARD PDU is not able to acquire environment sensor s information Check the LED When the connection is ok the LED should always be on otherwise ensure the RJ45 Ethernet cable is correctly connected to the RMCARD PDU and sensor Note Do not use a crossover cable which is for Tx Rx The Input Dry Contact does not function correctly Appendix Input Dry Contact Application Do not input signals that carry voltage into the input dry Ensure the Input Dry Contact wires are correctly connected and make sure the open short circuit setting of the connected devices is the same as the setting on the Web Interface Dry Contact contacts The input dry contacts only allow for open short circuit alana External Sensor 1 2 3 4 COM Conformance Approvals FCC War
Download Pdf Manuals
Related Search