Atlona AT-HDSYNC video converter
Contents
1. 1 1 Load File Save File Analyze H5 232 Setting Port Select COM 1 Baud Fate J600 z Auto Scan ComFort Head Machine EDID Write Machine EDIO HOMI Monitor writer HOM Monitor Reader 1 Firstly make sure of the correct setup and click on Aube Seely Ger a If the installation is done successfully the following pop up message window will show up to indicate the RS 232 serial port is automatically detected and successfully connected H5 Z32 Setting H5 232 Setting Port Select COM E Scan Sucessfully Baud Rate a600 m Auto Scan ComPaort M Scan Message E 2 f the error message as shown below appears inappropriate setup has occurred Check at the power supply and RS 232 serial port connection Toll free 1 877 536 3976 Local 1 408 962 0515 6 www atlona com Connecting technology to your world Scan Message 2 Read EDID from AT HDSync 1 If users would like to read EDID info from the AT HDSync simply click Read Machine EDID You can see the following message to inform you the correct reading of the EDID has been done Transmission Messaze Finish Reading the EDID Data from EDID Reader Writer to PC 2 Click 59 and make a quick analysis on the EDID information just read which users are capable of monitoring or modifying 3 To save the EDID information for your future reference please click The pop up window will guide you to save the2. 515 2 www atlona com Connecting technology to your world eC SA TT LCCOFPN ZN WARRANTY Limited Warranty Atlona Technologies warrants that a Its products the AT HDSync will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and b that the product will be free from defects in materials and workmanship under normal use and service for a period of 3 years In the event applicable law imposes any implied warranties the implied warranty period is limited to 3 years from the date of receipt Some jurisdictions do not allow such limitations on duration of an implied warranty so the above limitation may not apply to customers that fall within those areas Customer Remedies Atlona Technologies and its suppliers entire liability and Customer s exclusive remedy shall be at Atlona Technologies decision either return of the price paid for the product repair or replacement of the product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Customers receipt This Limited Warranty is void if failure of the product has resulted from accident abuse misapplication or natural occurrence In example but not limited to power surges electrical storms local power outage dropping the product or items on the product contact with fluids and physical misconduct i e kicking or punching Any replacement product will be war
3. EDID information within the PC Save File 3 Write EDID into AT HDSync 4 1 You can modify EDID content in the pop up window after you click Analyze You can also 5 load the previously saved EDID information in the analysis window by clicking Load File 6 2 While you finish editing EDID content you can click Write Machine EDID to write the EDID 7 profile to the AT HDSync After the writing action is completed the following message 8 window will show up Transmission Message Toll free 1 877 536 3976 Local 1 408 962 0515 y www atlona com Connecting technology to your world eC SA TT LCCOFPN ZN 4 Write EDID into a HDMI monitor projector Executing HDMI Monitor Writer might cause damage to your monitor s EDID For instance the sudden power surge or the disconnection of the serial port while updating EDID may result in an incomplete update process Therefore it is not recommended to use this function If users would like to update the monitor s EDID content and acknowledge such risk please make a backup copy of the original EDID and make sure there is no damage to your monitor s EDID 1 Click 5n9 orglck 999 5 to load the pre saved EDID profile in the analysis window 2 Click HDMI Monitor Writer Click HDMI Monitor Writer and wait for the following message window showing up Transmission Message Finish writing EDID data from PC to Monitor 3 The AT HDSync may not work on the monito
4. JNTLOMNNA Connecting technology to your world User Manual HDMI Recorder Writer and Hot Plug Simulator with RS232 control AT HDSync 4 Toll free 1 877 536 3976 Local 1 408 962 0515 www atlona com USA kk Xo SINCE f gt 2003 J Connecting technology to your world A TUONA TABLE OF CONTENTS LCa O Aeneae 2 Z Features mit UP mEH TM err 2 3 Package Contents asta icmtat viai uini Aiia 2 A e eiiaiio MM C C 3 S PabgelDescHDHUOR M ai neeeebenue interdite ote 4 5 Metala essentia sana on 5 7 Software Operation 2 diiveehvadesatadausndbccsdcnddsetagenoanacoeteiade 6 8 Safety Information ee dteteosasnanndaasuetovecatnsntanesaauntarnes 9 S was sued metta 10 10 Atlona Product Registration sss IRR 11 Toll free 1 877 536 3976 Local 1 408 962 0515 1 www atlona com Connecting technology to your world eC SA TT LCCOFPN ZN INTRODUCTION Atlona Technologies AT HDSync HDMI EDID Recorder Writer with Serial Control is a device that can emulate the EDID Extended Display Identification Data information It stores and recalls a default EDID setting in non volatile memory and supports HDCP handshaking ATHDSync allows your HDMI M source boot directly from AT HDSync and users can detach HDMI monitor at any time while installing AT HDSync between HDMI source and monitor It can also read and store the EDID of your HDMI display and even let you modify the EDID and upload the modified EDID to display
5. ff status Green light indicates if the AT HDSync is in the process of reading or writing EDID or sync detection Connect to a HDMI M display Source and Control Side Connect to a PC for RS 232 serial control to read write EDIDs from to the display Connect to a HDMI source device so the AT HDSync will be the bridge between the HDMI source and display Mode O Video supports up to HDMI 1 3 output Audio supports up to 7 1ch output Mode 1 Video supports up to HDMI 1 3 output Audio lock to stereo audio output Mode 2 Video locks to HDMI 1 2 output Audio supports up to 7 1ch output Mode 3 Video locks to HDMI 1 2 output Audio lock to stereo audio output Mode 4 Video DVI display mode Audio no audio output Mode 5 Safe Mode uses default EDID with video supported up to 1080p Mode 6 Recording Mode Learning EDID from HDMI output manually Mode 7 Serial Control Mode Control the AT HDSync by software via RS 232 Toll free 1 877 536 3976 Local 1 408 962 0515 4 www atlona com Connecting technology to your world INT LOMNNA INSTALLATION I Read the EDID manually from a HDMI monitor or projector Connect the HDMI display device to the AT HDSync via the DISPLAY port Plug in the 5V DC power supply unit Set AT HDSync to MODE 6 The EDID reading sequence is done when the green LED lights off Switch the rotary switch back to MODE 0 4 based on your sys
6. operate this equipment Operate this product using only the included external power supply Use of other power supplies could impair performance damage the product or cause fires In the event of an electrostatic discharge this device may automatically turn off If this occurs unplug the device and plug it back in Protect and route power cords so they will not be stepped on or pinched by anything placed on or against them Be especially careful of plug ins or cord exit points from this product Avoid excessive humidity sudden temperature changes or temperature extremes Keep this product away from wet locations such as bathtubs sinks laundries wet basements fish tanks and swimming pools Use only accessories recommended by Atlona to avoid fire shock or other hazards Unplug the product before cleaning Use a damp cloth for cleaning and not cleaning fluid or aerosols Such products could enter the unit and cause damage fire or electric shock Some substances may also mar the finish of the product Never open remove unit panels or make any adjustments not described in this manual Attempting to do so could expose you to dangerous electrical shock or other hazards It may also cause damage to your AT HDSync Opening the product will void the warranty Do not attempt to service the unit Disconnect the product and contact your authorized Atlona reseller or contact Atlona directly Toll free 1 877 536 3976 Local 1 408 962 0
7. ranted for the remainder of the original warranty period No other warranties To the maximum extent permitted by applicable law Atlona Technologies and its suppliers disclaim all other warranties either expressed or implied including but not limited to implied warranties of merchantability and fitness for a particular purpose with regard to the product and any related written materials This Limited Warranty gives customer specific legal rights Customers may have other rights depending on the jurisdiction No liability for damages To the maximum extent permitted by applicable law in no event shall Atlona Technologies or its suppliers be liable for any damages arising out of the use of or inability to use this product even if Atlona Technologies has been advised of the possibility of such damages Such damages include but are not limited to special incidental consequential or indirect damages for personal injury loss of business profits business interruption loss of business information or any other pecuniary loss Atlona Technologies and its suppliers entire liability under any provision of this agreement shall be limited to the amount actually paid by you for the product Some Jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damage The above limitations may not apply to you in such jurisdictional cases Toll free 1 877 536 3976 Local 1 408 962 0515 10 www atlona com Connec
8. rs with EDID write protection At this time you can see the following error message window showing up 5 Read EDID from a HDMI monitor projector 1 Click HDMI Monitor Reader and wait for the following message window showing up Transmission Message Finish Reading the EDID Data from Monitor to PC 2 Click Analyze and make a quick analysis on the EDID information just read which users are capable of monitoring or modifying 3 To save the EDID information for your future reference please click S59 The pop up window will guide you to save the EDID information within the PC Note The AT DVISync may not work on the monitors with EDID write protection Toll free 1 877 536 3976 Local 1 408 962 0515 8 www atlona com Connecting technology to your world eC SA TT LCCOFPN ZN SAFETY INFORMATION Safeguards To reduce the risk of electric shock do not Do not modify the wall plug Doing so will expose this product to rain or moisture void the warranty and safety features N power socket hire an electrician to replace the socket outlet and the device should your obsolete socket be easily accessible in the case it requires disconnection If the wall plug does not fit into your local This equipment should be installed near i ui Precautions FCC regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user s authority to
9. s Note Extended Display Identification Data EDID is a standard data format that contains basic information about a monitor and its capabilities including vendor information maximum image size color characteristics factory pre set timings frequency range limits and character strings for the monitor name and serial number The information is stored in the display and is used to communicate with the system through a Display Data Channel DDC which sites between the monitor and the PC graphics adapter The system uses this informa tion for configuration purposes so the monitor and system can work together FEATURES e HDMI 1 3c DVI 1 0 and HDCP 1 1 compliant e Built in default EDID e Able to read and store the EDID of monitors projectors e Prevent computers from deactivating inactive HDMI ports e Able to write EDID into the AT HDSync or the DVI monitors projectors e Maintain HDMI video resolution PACKAGE CONTENTS e 1x AT HDSync unit e 1x 5V DC power supply unit e 1x User s manual Toll free 1 877 536 3976 Local 1 408 962 0515 2 www atlona com Connecting technology to your world INT LONA un 4 m N d A gt O Z un Toll free 1 877 536 3976 Local 1 408 962 0515 9 www atlona com Connecting technology to your world AINT LO NINA PANEL DESCRIPTION Display Side 1 2 54 Connect to a 5V DC power supply unit Red light indicates the power on o
10. tem setting DO NOT let the rotary arrow pass by Mode 5 which will erase the EDID just learned and restore the de fault EDID psc ps Il Recall the default universal EDID Set AT HDSync to MODE 7 Connect the HDMI display device to the AT HDSync via the DISPLAY port Plug in the 5V DC power supply unit Connect the AT HDSync to the serial port of PC and run the control software Click on HDMI Monitor Reader button to read the EDID information from the HDMI display The EDID reading sequence is done when the green LED lights off Di 2E A E Ill Write an EDID to a HDMI monitor or projector Set AT HDSync to MODE 7 Connect the HDMI display device to the AT HDSync via the DISPLAY port Plug in the 5V DC power supply unit Connect the AT HDSync to the serial port of PC and run the control software Click on HDMI Monitor Writer button to write the EDID information to HDMI display The EDID reading sequence is done when the green LED lights off ia d m Note The AT HDSync may not work on the monitors with EDID write protection Toll free 1 877 536 3976 Local 1 408 962 0515 5 www atlona com Connecting technology to your world AINT LO NINA SOFTWARE OPERATION Before running the software please make sure the rotary switch is set to MODE 7 1 Getting started EN HDMI EDID Recorder Writer AT He OSN HOH EDIO Rmmpmimpmmvemirmen WITH Sposa Core EDID Information EDID Code Path
11. ting technology to your world eC SA TT LCCOFPN ZN ATLONA PRODUCT REGISTRATION Thank you for purchasing this Atlona product We hope you enjoy it and will take an extra few moments to register your new purchase Registration creates an ownership record if your product is lost or stolen and helps ensure you ll receive notification of performance issues and firmware updates At Atlona we respect and protect your privacy assuring you that your registration information is completely secure Atlona product registration is completely voluntary and failure to register will not diminish your limited warranty rights To register go to http Awww atlona com registration Toll free 1 877 536 3976 Local 1 408 962 0515 11 www atlona com
Download Pdf Manuals
Related Search