Premier TS72B-MS2 flat panel floorstand
Contents
1. 3 Do not over tighten the screws Adapter Installation 1 Install the PSD SPA mount adapter over the top of the poles and secure it at the desired height with the four 4 M8 x 10 Allen screws supplied 2 Use the Allen wrench supplied to secure the adapter to the poles Installing the Back Plate The back plate will vary depending on the system A Note ordered There are two 2 different systems for this stand the PSM series and the CTM series Arrow must be pointing up prior to installation A Caution Secure the following plates to the secured PSD SPA on the tubes 1 For the PSM Series secure the back plate to the four 4 threaded mounting points found on the PSD SPA with the four 4 M10 x 12 bolts and flat washers supplied 2 For the CTM Series secure the back plate to the four 4 threaded mounting points found on the PSD SPA with the four 4 M10 x 12 bolts and flat washers supplied Installation Manual PSD TS 2 Support i Poles Allen Wrench Collared Mounting Columns M8 x 10mm Hex screws Pr n Allen Wrench y F PSD SPA MRA 7 M8 x 10mm Adapter edl Hex screws n a Directional Arrow PSD SPA Adapter Back Plate M10 x 12mm Hex Head Bolts Page 5 PSD T2. this product to be free from defects in material and workmanship for the lifetime of the original owner of this product The limited warranty is valid only for the original purchaser of the product What Premier Mounts Will Do At the sole option of Premier Mounts Premier Mounts will repair or replace any product or product part that is defective If Premier Mounts chooses to replace a defective product or part a replacement product or part will be shipped to you at no charge but you must pay any labor costs What is Not Covered Limitations PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS ADAPTERS DISPLAYS PROJECTORS OTHER PROPERTY OR PERSONAL INJURY RESULTING IN WHOLE OR IN PART FROM IMPROPER INSTALLATION MODIFICATION USE OR MISUSE OF ITS PRODUCTS PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU What Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirt
3. M Back Plate Series PSM Ss Te Mounting oo T aS Bracket XN Flat Panel CTM Series M6 x 12mm Security Screws CTM Back Plate R M6 x 12mm gS Safety Knobs Sos CTM Series Sw Mounting Nil Brackets Flat Panel Installation Manual b a 24 PSD TS b Optional Items Floor Installation 1 If securing the base to the floor use commercially f available hardware Suitable Hardware Commercially Available Shelf Installation A Caution PO 20t install the optional shelf higher than 39 display A Note If using a shelf please install prior to attaching the L The shelf must be attached before the flat panel display and i a a PSD SPA adapter is installed to the stand Pa a 2 Install the shelf to the poles by sliding the shelf over the ra poles and down into position r 3 Determine the final height and secure the shelf using four 4 M8 x 10mm set screws 4 Tighten these screws using the supplied Allen wrench Optional Shelf M8 x 10mm Set Screw Installation Manual Page 7 PSD TS Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants
4. NORTH AMERICA 3130 East Miraloma Avenue Anaheim CA 92806 USA USA and Canada Phone 800 368 9700 Fax 800 832 4888 Other Locations Premier Mounts 2008 953 1 000 100 06 J PREMIER X P MOUNTS The original holding company INSTALLATION INSTALLATIONS PSD TS FLOOR STAND AUSTRALIA NEW ZEALAND OCEANIA Distributor EUROPE Swallow House P O Box 295 Shilton Industrial Estate Mordialloc Victoria 3195 Shilton Coventry England CV79JY Australia Phone 44 0 2476 614700 Fax 44 0 2476 614710 Phone 03 9586 6330 Www premiermounts com au Phone 001 714 632 7100 Fax 001 714 632 1044 PSD TS h Table of Contents Wanna CAS 0S 0 e e E E A E E A E 2 Pae E a E E E E A E E 3 E ON TOO a E E E S E S 3 PSS A E E O E E E A O E 4 SUPC P Ole MNS a a E speci EE EAE E E E E R E NS 5 PRCA vet TAS TAMA OM arsisactuctiouneeu san satan ae Nesaiceatosptau suites Matinee siiaca fait oueucue tos Mate die ieutiasrtiat aienctitnsdtatesiten taawediatves 5 DAS CA TS TACK PACS r a E E E 5 POM ACMI TNE TIS OIA aen E E S 6 ptt OMS S eee E E ae paste anes oso E E E E E E E 7 WA cag e EE A E E A E E E E E E ET EE EE EN E EEE E E E E E E E EOE A 8 Warning Statements N PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS AND IS NOT RES
5. PONSIBLE FOR ANY DAMAGES CLAIMS DEMANDS SUITS ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE ATTACHMENTS OR MODIFICATIONS THE MOUNTING SURFACE MUST BE CAPABLE OF SUPPORTING 160LBS IF NOT THE MOUNTING SURFACE MUST BE REINFORCED PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN AS OUTLINED IN THE INSTALLATION INSTRUCTIONS MUST BE ADHERED TO FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY OR EVEN DEATH THE OPTIONAL SHELF IS ONLY CAPABLE OF HOLDING 25LBS OR LESS SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY PRIOR TO THE INSTALLATION OF THIS PRODUCT THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE Indicates that the power plug is to be disconnected from the Pay Contact Premier Mounts with any questions power outlet 800 368 9700 Safety precautions must be taken at all times Warning and Caution statements Do not install on a structure that is prone to vibration movement or chance of impact Failure to do so could result in damage to the flat panel display and or damage to the mounting surface Do no
6. S Attaching the Display __ The flat panel display is very heavy two people are A Caution required to lift the flat panel and secure it to the stand To install the PSM series or CTM series mounting Note brackets to the flat panel refer to its installation instructions The diagrams to the right show the CTM and PCM series systems PSM Series Raise the flat panel display with the mounting bracket secured and insert the four 4 tab openings from the PSM mount to the four 4 receiving tabs found on the back plate Push the flat panel display down right and down again to lock the mount together Make sure all tab openings are interlocked with the receiving tabs before letting go of the flat panel Secure the brackets with two 2 M6 x 12mm Phillips supplied screws for additional security _ Raise the flat panel display with the left and right A Caution brackets secured to the plasma and insert the bottom and top hooks from the mounting arms to the top and bottom rods found on the CTM back plate Secure the mounting arms with the two 2 M6 x 12mm Safety knobs supplied Cauti The safety knobs MUST be used Failure to do so A sil may result in damage to the flat panel display or personal injury Page 6 This stand is intended for use only with the maximum A Caution Weights indicated Use with products heavier than the maximum weights indicated may result in instability causing possible injury PSM PS
7. ocket 5 32 Allen Key Supplied Installation Manual Page 3 ie d PSD TS 24 k Features Congratulations on the purchase of your new Premier Mounts PSD TS Floor Stand When combined with a mount our floor stand allows you to place a display in a horizontal or vertical position with the PSM mount only The floor stand can be configured for single flat panel display The height is adjustable to any point along the stand s vertical support poles to achieve the perfect viewing level The PSD TS mates directly to our CTM or PSM series of mounts PSD SPA Adapter Optional CTM Mount Optional PSM Mount e e AA Sk PSM Senex Mount CTM Series Mount Page 4 Installation Manual b 4 24 b Support Pole Installation Remove the stand out of the box and check for all proper hardware if missing any hardware please call Premier Mounts A PSM or CTM series mount is required to complete Note the PSD TS system Refer to the installation instructions to install the mounting bracket 1 Insert the poles inside the base columns of the PSD TS making sure they are fully seated on the base with the cable access holes facing the rear of the base 2 Secure the poles with four 4 M8 x 10mm socket head screws and tighten them using the Allen wrench supplied
8. t install near heater fireplace direct sunlight air conditioning or any other source of direct heat energy Failure to do so may result in damage to the flat panel display and could increase the risk of fire At least two qualified people should perform the installation procedure Injury and or damage can result from dropping or mishandling the flat panel display POPPPOO A Caution This stand is intended for use only with the maximum weights indicated Use with products heavier than the maximum weights indicated may result in instability causing possible injury Page 2 Installation Manual PSD TS This floor stand is shipped with all proper installation hardware and components Make sure that none of these parts are missing and or damaged before beginning installation If there are parts missing and or damaged please stop the installation and contact Premier Mounts 800 368 9700 Please review all WARNING and CAUTION statements see Page 2 before beginning the installation of the PSD TS PSD TS Base Support Poles Qty 1 NS Qty 2 The length will vary depending on the order M8 x 10mm Set Screw Qty 10 PSD SPA Adapter Qty 1 M10 x 12mm Slotted Hex M10 Flat Washers Head Qty 4 Q FT are Qty 4 Shelf Optional NOTE The shelf is only capable of holding 25Lbs or less Installation Tools Phillips Head Screw Driver Soft Material Blanket Drill Gun Pencil Socket Wrench 17mm S
9. y 30 days Proof of purchase an original sales receipt from the original consumer purchaser must accompany all warranty claims Warranty claims must also include a description of the problem the purchaser s name address and telephone number General inquiries can be addressed to Premier Mounts Customer Service at 1 800 368 9700 Warranty claims will not be accepted over the phone or by fax Premier Mounts Attn Warranty Claim 3130 E Miraloma Avenue Anaheim CA 92806 How State Law Applies THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE Page 8 Installation Manual
Download Pdf Manuals
Related Search