Motorola MBP35
Contents
1. parent unit closer to the baby unit until the link is re established 2 5 Registration The baby monitor is already pre registered upon your purchase You do not need to register it again unless the baby unit loses its link with the parent unit To re register your baby monitor follow the procedure below 1 Switch off both the baby and parent units 2 Press and hold wen and then press on the parent unit keeping the held for more than 5 seconds after it switches on until the power on LED flashes The parent unit is then in registration mode 3 Cover the camera lens on the baby unit with a black cloth or bag and then switch it on 4 Wait for the 2 units to search and establish the link 5 Remove the cover on the baby unit The registration is complete when the display screen on the parent unit captures the video from the baby unit s camera 10 Getting started 3 Using the Baby Monitor MBP35 3 1 Setting up e Place the camera in a convenient location and point the lens of the camera towards the area you want to monitor e Tilt the head of the baby unit up or down to your desired position until the parent unit gets a good reception of the baby NOTE Do not place the camera within baby s reach If there is interference on the picture or sound try moving the units to different locations and ensure they are not close to other electrical equipment 3 2 Night vision The camera has 8 high intensity infr2. General Information de will BINATONE ELECTRONICS INTERNATIONAL LTD O BINATONE ELECTRONICS INTERNATIONAL LTD at its sole option will at no charge repair replace or refund the purchase price of any Products or Accessories that does not conform to this warranty Binatone Electronics International LTD may use functionally equivalent reconditioned refurbished pre owned or new Products Accessories or parts in such repair or replacement and any Products Accessories or parts removed or being replaced under this warranty become the property of Binatone Electronics International LTD What Other Limitations Are There ANY IMPLIED WARRANTIES OR CONDITIONS IRRESPECTIVE OF WHETHER THEY ARE IMPOSED BY LAW OR OTHERWISE INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY OTHERWISE THE REPAIR REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL WARRANTIES AND MOTOROLA AND BINATONE ELECTRONICS INTERNATIONAL LTD MAKES NO OTHER WARRANTIES OR CONDITIONS EXPRESS OF IMPLIED IN NO EVENT SHALL MOTOROLA OR BINATONE ELECTRONICS INTERNATIONAL LTD BE LIABLE WHETHER UNDER THIS LIMITED WARRANTY OR IN CONTRACT OR TORT INCLUDING NEGLIGENCE OR STRICT PRODUCT LIABILITY OR OTHERWISE FOR DAMAGES OR CLAIMS IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT
3. OR ACCESSORY OR FOR ANY INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR LOSS OF REVENUE SAVINGS OR PROFITS LOSS OF BUSINESS LOSS OF PROGRAMS DATA INFORMATION WHETHER CONFIDENTIAL PROPRIETARY OR PERSONAL IN NATURE OR OTHERWISE OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR General Information 19 ACCESSORIES AND BINATONE ELECTRONICS INTERNATIONAL LTD SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY CLAIMS OR DEMANDS MADE BY ANY THIRD PARTY OR MADE BY YOU ON BEHALF OF ANY THIRD PARTY TO THE FULL EXTENT THESE DAMAGES OR CLAIMS MAY BE DISCLAIMED BY LAW Some states countries or jurisdictions do not allow the limitation or exclusion of incidental or consequential damages or limitation on the length of an implied warranty so the above limitations or exclusions may not apply to you in such states countries or jurisdictions This warranty gives you specific legal rights and you may also have other rights that vary from state to state or from one country jurisdiction to another Products or Accessories Length of Coverage Covered Consumer Products Two 2 years from the date of purchase by the first consumer purchaser of the product Consumer Accessories Ninety 90 days from the date of purchase by the first consumer purchaser of the accessory Consumer Products and The balance of the original Accessories that are Repaired warranty or for ninety
4. UEA 11 3 3 Talk TUNGCUON oorsee a aa R E ASE iaaa 11 3 4 Adjusting the volume of the parent unit cccceessseeeeeeeeeeeees 11 3 5 Playing a lullaby for your Daby ccccccsseesseeeeeeeesseeeeeeseeeeeeeens 12 MBP35 Parent Unit Menu Options ssssnnnnnnnnnnnnnrennnnnnnnnnnenen nn 13 Acl BooNtNeS Saarne iaaa a A A a e i a 13 4 2 Temperature display C or F ccccecccceeeeceesseeeeeeeeeeesseeeeeeeeess 13 A ING LUA or ered enn EE E E 13 4 4 Voice Activation siscitascatccssiaainiasasate cadsuveadseni ataaitiwlas dastabaiia toda 14 Disposal of the device environment ccccsssseeeeeeeeeneeeees 15 CNN sais sss cis a a tacceneeenaneens 16 Helana r uctvaconie oan cia 17 General Information i ceias ci secssoucestonucotecneasutewivencusineccecaccvncehtsatacvees 18 Table of contents 5 1 Safety Instructions WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is when handled as described in the User s Guide safe to use Therefore always read the instructions in this User s Guide carefully before using the device e Adult assembly is required Keep small parts away from children when assembling e This product is not a toy Do not allow children to play with it e This baby monitor is not a substitute for responsible adult supervision e Keep this User s Guide for future reference e Do not place the baby unit or cables in the cot or
5. the event of a mains power failure Overview of your Parent unit 1 Display LCD screen 7 Microphone 2 Up f Down y keys 8 Menu key Normal mode Adjust Press to open the Menu speaker volume options Menu mode Adjust setting 9 Talk key 3 Power and Low battery LED Press and hold to speak to 4 VOX LED for voice activation your baby 5 Lullaby Play Stop key fen 10 Power key Co Press once to play lullaby Press to turn on the unit Press again to stop eye Press and hold to turn it off 6 Lullaby selection key 11 Antenna Press to select a lullaby 12 Battery cover during playback 13 Speaker Parent unit display symbols Indicates that the baby unit is out of range or not linked to the parent unit Appears when setting or displaying the temperature reading Fa Indicates that the temperature is too high Above 39 C 102 F Indicates that the temperature is too low Below 15 C 59 F Appears when setting the Night Light function ore sar Peame E Overview of your Baby unit Wi Photo sensor 6 On Off switch Camera lens 7 Speaker Infrared LEDs 8 Antenna Power LED 9 Temperature sensor Night lights Important guidelines for installing your Baby Monitor To use your video monitor baby and parent unit together you must be able to establish a radio link between them and the range will be affected by environmental conditions Any large metal object like a refrig
6. the product which is not covered by the Warranty When necessary clean it with a damp cloth e Keep your MBP35 away from hot humid areas or strong sunlight and don t let it get wet e Every effort has been made to ensure high standards of reliability for your MBP35 However if something does go wrong please do not try to repair it yourself contact Customer Service for assistance 16 Cleaning 7 Help Display No display e Try recharging or replacing the batteries Reset the units Unplug the units electrical power including the batteries and both mains adapters then plug them back in Is the unit turned on Press and release on the parent unit to turn it on Registration If the baby unit has lost its link with the parent unit Try recharging or replacing the batteries If the baby unit is too far away it may be going out of range so move the baby unit closer to the parent unit Reset the units by unplugging the units batteries and mains electrical power Wait for around 15 seconds and plug it back in again Allow up to one minute for the baby unit and the parent unit to synchronise See 2 5 Registration if there is a need to re register the units Interference Noise interference on your parent unit Your baby and parent units may be too close Move them further away from each other Make sure there is at least 1 metre between the 2 units to avoid feedback howling If the baby unit is to
7. within arm s reach of the baby the unit should be at least 1 metre away e Keep the cords out of reach of children e Do not cover the baby monitor with a towel or blanket e Never use extension cords with power adapters Only use the power adapters provided e Test the baby monitor before use Become familiar with its functions e Do not use the baby monitor near water e Do not install the baby monitor near a heat source e Only use the chargers and power adapters provided Do not use other chargers or power adapters as this may damage the device and batteries e For the parent unit only insert a rechargeable battery pack of the same type For the baby unit use non rechargeable batteries and insert with the correct polarity as indicated in the battery compartment and in 2 1 Baby unit battery installation e Do not touch the charger or plug contacts with sharp or metal objects CAUTION Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions 6 Safety Instructions 2 Getting started 2 1 Baby unit battery installation The camera uses either 3 AA size batteries non rechargeable batteries recommended or the household power mains The Baby unit has no charging function IMPORTANT The non rechargeable batteries for the Baby unit are not supplied with your product We recommend the batteries to be insta
8. 90 days or Replaced from the date returned to the consumer whichever is longer Exclusions Normal Wear and Tear Periodic maintenance repair and replacement of parts due to normal wear and tear are excluded from coverage Batteries Only batteries whose fully charged capacity falls below 80 of their rated capacity and batteries that leak are covered by this limited warranty Battery life and the changes in battery capacity with time or use are excluded from this warranty 20 General Information Abuse amp Misuse Defects or damage that result from a improper or unreasonable use operation storage misuse or abuse accident or neglect or other external cause such as physical damage cracks scratches etc to the surface of the product resulting from misuse b your failure to follow or operate outside the usage parameters stated in the user instructions that came with the Products or Accessories c contact with liquid water rain extreme humidity or heavy perspiration sand dirt or the like extreme heat or food d use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions or e other acts or omissions which are not the fault or neglect of Motorola or Binatone Electronics International LTD are excluded from coverage Use of Non Motorola branded Products and Accessories Defects or damage that result from the use of Non Motorola branded or c
9. ab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment 3 Close the battery compartment and tighten the screw in a clockwise direction 4 Press once to switch ON the parent unit It will take a few seconds to start up the unit 5 Press and hold to switch OFF the parent unit NOTE When the battery level is low the power LED will turn orange and will flash Charge the battery pack for at least 15 hours before using on battery power only NOTE When the unit is powered up with either the power adapter or using the rechargeable battery pack the LED will light up in green If both the power adapter and rechargeable battery pack are used the LED will light up in red 2 4 Parent unit power supply E 4 On yy Ove 1 Connect the small plug of the power adapter to the parent unit and the other end to the mains socket 230V 50Hz NOTE Only use the enclosed power adapter 6V DC 1000mA Getting started 9 2 Press to switch ON the parent unit The power LED will light up in green 3 Press and hold to switch OFF the parent unit NOTE Once the baby and parent units are switched on the display on the parent unit will show the video captured by the baby unit When there is no connection or out of range the YT icon on the LCD display will flash and the parent unit will beep continuously Move the
10. ared LEDs for picking up clear images in the dark When the built in photo sensor detects a low level of ambient light the LEDs will automatically activate and the screen on the parent unit will display in black and white 3 3 Talk function Press and hold on the Parent unit to talk to your baby through the Baby unit loudspeaker The symbol Yy will be displayed in the middle of the LCD screen NOTE The lullaby will stop playing if the Talk function is activated 3 4 Adjusting the volume of the parent unit Press f and y to adjust the volume of the parent unit during normal operations Using the Baby Monitor MBP35 11 3 5 Playing a lullaby for your baby You can remotely activate a lullaby to be played on the baby unit 1 Press on once on the parent unit to play the lullaby Press on again to pause playback 2 To select another lullaby press during playback There are 5 lullabies available for selection indicated by H 1 Ja 2 Ja 3 J 4 frm or 5 3 To play all lullabies press until Ja is displayed on the LCD screen TIPS During the first 10 seconds of lullaby playback pressing f or will adjust the lullaby volume of the baby unit Pressing N or after 10 seconds of lullaby playback will adjust the volume of the parent unit 12 Using the Baby Monitor MBP35 4 MBP35 Parent Unit Menu Options 4 1 Brightness 1 Press repeatedly until K appears on the LCD screen 2 Press and W to a
11. b a written description of the problem and most importantly c your address and telephone number These terms and conditions constitute the complete warranty agreement between you and BINATONE ELECTRONICS INTERNATIONAL LTD regarding the Products or Accessories purchased by you and supersede any prior agreement or representations including representations made in any literature publications or promotional materials issued by BINATONE ELECTRONICS INTERNATIONAL LTD or representations made by any agent employee or staff of BINATONE ELECTRONICS INTERNATIONAL LTD that may have been made in connection with the said purchase 22 General Information Technical Specifications Baby unit Frequency Maximum range Image sensor Lens IR LED Power Parent unit Frequency Display Display colours Brightness control Power General Information 2 4GHz to 2 4835GHz Extended range up to 450 feet Based on unobstructed line of sight Actual range will vary depending on surroundings Colour CMOS f 2 5mm F 2 8 8 pcs Adapter DC 6V 1 0 A Model Kings KSS12_060_1000G OR Battery 3xAA non rechargeable batteries Note Batteries are not included 2 4GHz to 2 4835GHz 3 5 TFT LCD 16 7M colour LCD 5 steps Adapter DC 6V 1 0 A Model Kings KSS12_060_1000G OR Battery NiMH rechargeable battery pack Model Desay battery AA2000 WARNING Do not use non rechargeable batteries for the Parent Uni
12. djust the LCD brightness level to 1 2 3 4 or 5 the default setting is 3 The LCD brightness will be adjusted accordingly 3 Press repeatedly to exit 4 2 Temperature display C or F Press repeatedly until i appears on the LCD screen 2 Press 4 and W to change the temperature display to C F or OFF the default setting is C The temperature unit and reading will be changed accordingly 3 Press repeatedly to exit NOTE If the temperature goes above 39 C 102 F 4 appears on the LCD screen If the temperature goes below 15 C 59 F iy appears on the LCD screen 4 3 Night Light 1 Press repeatedly until Oe cca on the LCD screen 2 Press to turn the Baby unit Night Light ON or press Y to turn the Night Light OFF The night lights on the baby unit will be switched on and off accordingly 3 Press repeatedly to exit MBP35 Parent Unit Menu Options 13 4 4 Voice Activation The sound detection sensitivity level VOX of the Baby Monitor can be adjusted If the baby is a quiet sleeper the sensitivity level can be increased so that minor disturbances can be detected and transmitted to the parent unit 1 Press repeatedly until VOX appears on the LCD screen Press 4 and WY to adjust the VOX level to OFF 1 2 3 4 or 5 the default setting is OFF When the VOX function is on level 1 to 5 the VOX LED will be turned on and the LCD screen will switch off after a few seconds if the detec
13. erator a mirror a filing cabinet metallic doors or reinforced concrete between the baby and parent unit may block the radio signal The signal strength may also be reduced by other solid structures like walls or by radio or electrical equipment such as TV s computers cordless or mobile phones fluorescent lights or dimmer switches Use of other 2 4GHz products such as wireless networks Bluetooth systems or microwave ovens may cause interference with this product so keep the baby monitor away from these types of products or turn them off if they appear to be causing interference If the signal is poor try moving the parent and or the baby unit to different positions in the rooms Table of contents dy Safety INStruCllONS wivhccececedensetsccsceshecciceanebeteaiceetadssteaeievacteadeeaseavies 6 Getting started iann aaa aaea aeaa 7 2 1 Baby unit battery installation ccccccccccceeeeeeeeceeeeeeeeeeeeeeeeenaaeeees 7 2 2 Baby unit power supply ccc cecceceseeeceeceeeeeeeeceaeeeeeeseeeeeeesaeeeeees 8 2 3 Parent unit battery Installation cccceeeceeeceeeeeeeeeeeeeeeeeeeeeeeeees 8 2 4 Parent unit power supply cccccccecseeececeeeeeeeeeeseeeeeeeeseaeeeeeeeeaaees 9 Zi FREGISHALION eerie ienaa eria iara eaae eai raka dE 10 Using the Baby Monitor MBP35 scceeeeeseeeeeeseeeeeeeeeeeeenes 11 Beli Seting Upis cra e a mais A a Nd 11 Siz NIGH VISION a a a tes A Oa TETEE
14. ertified Products or Accessories or other peripheral equipment are excluded from coverage Unauthorised Service or Modification Defects or damages resulting from service testing adjustment installation maintenance alteration or modification in any way by someone other than Motorola Binatone Electronics International LTD or its authorised service centres are excluded from coverage Altered Products Products or Accessories with a serial numbers or date tags that have been removed altered or obliterated b broken seals or that show evidence of tampering c mismatched board serial numbers or d nonconforming or non Motorola branded housings or parts are excluded from coverage Communication Services Defects damages or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage General Information 21 How to Obtain Warranty Service or Other Information To obtain service or information please call 49 0 1805 938 802 in Europe You will receive instructions on how to ship the Products or Accessories the shipment of which shall be at your own risk and expense to a BINATONE ELECTRONICS INTERNATIONAL LTD Authorised Repair Centre To obtain service you must include a a copy of your receipt bill of sale or other comparable proof of purchase of the Products or Accessories showing the date of purchase
15. lled before use so that the unit continues to work in the event of a mains power failure 1 Loosen the screw in a counterclockwise direction using a small screwdriver Remove the battery cover 2 Install the 3 AA non rechargeable batteries following the polarity as shown in the compartment Close the battery compartment and tighten the screw in a clockwise direction 3 Slide the power switch to the ON position The power LED will light up in green To switch off the baby unit slide the power switch to the OFF position NOTE When the battery level is low the power LED will turn orange and will flash WARNING Do not mix old batteries with new ones Keep batteries away from small children Do not short circuit batteries or dispose of in fire Remove the batteries if this device is not going to be used for a long period of time Getting started 7 2 2 Baby unit power supply 1 Connect the small plug of the power adapter to the baby unit and the other end to the mains socket 230V 50HZz NOTE Only use the enclosed power adapter 6V DC 1000mA 2 Slide the power switch to the ON position The power LED will light up in green 3 To switch off the baby unit slide the power switch to OFF position 2 3 Parent unit battery Installation 8 Getting started 1 Loosen the screw in a counterclockwise direction using a small screwdriver Remove the battery cover 2 Insert the wire t
16. o far away it may be going out of range so move the baby unit closer to the parent unit Make sure the baby and parent units are not near other electrical equipment such as a television computer or cordless mobile telephone 8 General Information If your product is not working properly 1 Read this User s Guide or the Quick Start Guide 2 Visit our website www motorola com 3 Contact Customer Service at 49 0 1805 938 802 in Europe Email motorola telemarcom eu To order a replacement battery contact customer service or visit our website Consumer Products and Accessories purchased in Europe What Does this Warranty Cover Subject to the exclusions and limitations contained below Binatone Electronics International LTD warrants the Motorola branded consumer products that it manufactures Products and the Motorola branded or certified accessories sold for use with these Products that it manufactures Accessories to be free from defects in materials and workmanship under normal consumer usage for the period s outlined below This limited warranty is a consumer s exclusive remedy and only applies as follows to new Motorola branded Products and Accessories manufactured by Binatone Electronics International LTD and purchased by consumers in Europe which are accompanied by this written warranty Who is covered This warranty covers only the first consumer purchaser and is not transferable 18
17. s o Seest 909 AA MOTOROLA USER S GUIDE MBP35 BABY MONITOR USER S GUIDE The features described in this user s guide are subject to modifications without prior notice Welcome to your new Motorola Baby Monitor Thank you for purchasing the MBP35 Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom Please retain your original dated sales receipt for your records For warranty service of your Motorola product you will need to provide a copy of your dated sales receipt to confirm warranty status Registration is not required for warranty coverage For product related questions please call 49 0 1805 938 802 in Europe Email motorola telemarcom eu On the Web www motorola com This User s Guide provides you with all the information you need to get the most from your product Before you can use the baby monitor you ll need to insert and fully charge the battery on the Parent unit Please read the Safety Instructions on page 6 before you install the units Got everything e 1x Parent unit e 1x Baby unit e 1x Rechargeable Ni MH battery pack for the Parent unit e 1x Power adapter for the Parent unit e 1x Power adapter for the Baby unit IMPORTANT The non rechargeable batteries for the Baby unit are not supplied with your product We recommend the batteries to be installed before use so that the unit continues to work in
18. s Declaration CE Manufacturer Importer Signature of authorized person Al Wes Sj nature K H Mueller CT0 Place amp Date London 21 May 2009 AN MOTOROLA Manufactured distributed or sold by Binatone Electronics International LTD official licensee for this product MOTOROLA and the Stylized M Logo and other Motorola trademarks and trade dress are owned by Motorola Inc and are used under license from Motorola Inc MOTOROLA and the Stylized M Logo are registered in the US Patent amp Trademark Office All other product or service names are the property of their respective owners Motorola Inc 2009 All rights reserved eo CE Version 1 0 Printed in China
19. t Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions BINATONE TELECOM PLC wy 1 Apsley Way London NW2 7HF United Kingdom Tel 44 0 20 8955 2700 Fax 44 0 20 8344 8877 e mail binatoneuk binatonetelecom co uk t if a Os EC Declaration of Conformi We the manufacturer Importer Binatone Telecom Ple 1 Apsley Way London NW2 7HF United Kingdom Declare under our sole responsibility that the following product Type of equipment Digital Baby Monitor Model Name MBP 35 Country of Origin China Brand Motorola complies with the essential protection requirements of R amp TTE Directive 1999 5 EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters the Council Directive 2004 108 EC on the approximation of the laws of the Member States relating to electromagnetic compatibility EMC and the European Community Directive 2006 95 EC relating to Electrical Safety Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R amp TTE was based on Annex III of the Directive 1999 5 EC and the following standard Radio Spectrum EN300328 V1 7 1 2006 EMC EN 301489 1 V1 8 1 2008 EN301489 17 V1 3 2 2008 Electrical Safety EN 60950 1 2006 The product is labelled with the European Approval Marking CE as show Any Unauthorized modification of the product voids thi
20. ted sound is below the level selected Note Level 5 is the most sensitive and so will need to be the quietest before the LCD will switch off 2 Press repeatedly to exit NOTE The LCD screen on the parent unit will be switched back on when the sound level of the baby reaches the VOX threshold or when any key on the parent unit is pressed 14 MBP35 Parent Unit Menu Options 5 Disposal of the device environment At the end of the product lifecycle you should not dispose of this product with normal household waste but take the product to a collection point for the recycling of electrical and electronic equipment The symbol on the product user s guide and or box indicates this Some of the product materials can be re used if you take them to a recycling point By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment Please contact your local authorities in case you need more information on the collection points in your area Dispose of the batteries in an environmentally friendly manner according to your local regulations Disposal of the device environment 15 6 Cleaning Clean the MBP35 with a slightly damp cloth or with an anti static cloth Never use cleaning agents or abrasive solvents Cleaning and care e Do not clean any part of the product with thinners or other solvents and chemicals this may cause permanent damage to
Download Pdf Manuals
Related Search