Home

Samsung SRN-3250

1. 1 Use Static IP 2 Use DHCP Client 3 Use PPPoE 4 Use DDNS Use one of the first 3 options to set an IP address for the Monitor Ethernet Port Selecting menu item 4 lets you to use DDNS instead of an IP address Static IP Setting Press and V to select 1 Use Static IP and then press Enter IP Address 0 0 0 0 83 Press the V buttons to select numbers O 9 space and period press the lt gt buttons to move between digits Once you have finished entering the IP address press Enter Subnet Mask 0 0 oO a g fed Qa cr g os fed O DNS1 Server IP 192 168 1 1 Enter the Subnet Mask Gateway and DNS Server 1 address the same way Confirm IP Setup Yes Enter No Esc Pressing Enter moves to the next screen as the IP address for Monitor Ethernet Port is oO eing saved To move back to the previous phase press ESC To cancel the new settings and move back to the main screen hold down ESC for 2 seconds or longer IP Setup DONE Bae The DNS1 address can be set under Monitor Ethernet Port Port gt Static IP i ANI The DNS 2 address is under Source Port gt Static IP Once set these DNS servers are used by all ports DNS1 is used as the default and DNS2 is the backup Note DHCP Client Setup Press and V to select 2 Use DHCP Client and then press Enter Use DHCP Client Yes Enter No Esc Pressing Enter moves to the next screen as Monitor E
2. v The product must be grounded to reduce the risk of electric shock Using the Product v Opening or removing the product case will expose you to the risk of electric shock do not open or remove the case unless you are a qualified technician 6 Vv To prevent electrical fire do not connect multiple power cords to a single outlet v Do not place heavy objects or vessels containing water on the unit since it can cause serious malfunctions v Do not use this item in a location containing propane gas gasoline or other flammable substances to avoid risk of explosion or fire v To avoid the risk of electric shock do not touch the power plug with moisture on your hands v Make sure that no electrically conductive material enters the cooling vent v Do not pull on the power plug with any force a damaged plug may cause electric shock or fire Disassembling and Cleaning the Product v There is a risk of malfunction shock or other dangers Do not disassemble or attempt to fix or alter the product yourself v Do not clean the product with water paint thinner or other organic solvent as doing so may cause product malfunctions and or electric shock When cleaning the product use a dry cloth to wipe the exterior of the device A Misuse or wrongful operation of the item may result in injury or damage to the item It indicates caution should be observed when operating Caution Installing the Product v When instal
3. TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along wit
4. 3 You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you must alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library 4 You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the
5. Channel ie ieee Pause Capture Info DIT gt PT PTZ speed 5 01 47 07 MD ON ch 01 OFFich 01 4 4 1 Splitting Screen and Changing Channels You can select the number of video feeds to simultaneously display on screen by clicking the button in the upper left of the screen You can have 1 4 9 16 36 or 64 channel video feed s displayed simultaneously on screen a separate browser window will open to display 36 or 64 channel video feeds When displaying 1 36 channels the channels are displayed in groups to manage visibility For example if you are viewing 16 channels simultaneously then channels 1 16 are displayed is used to in group 1 and channels 17 32 are displayed in group 2 and so on select which group or channel you want to view To watch video in all channels in an orderly manner click the button to activate the Auto Sequence option that cycles through videos in different groups at 7 second intervals The logs for the current channel are at the bottom of the screen event MD V Loss main frame sensor and relay event To check the logs move the button on the right side of the window upward or downward The names of events like MD V Loss etc are displayed on the video of channels where events occur 33 4 4 2 Video Control When clicking on a video channel the selected screen is outlined in orange With a channel selected you can use the buttons on left side of
6. External HDD The NVR supports an eSATA interface for connecting external storage devices four eSATA ports are located on the rear panel The product can have up to 20 TB of storage capacity by utilizing the internal HDDs and eSATA ports Based on 1TB data capacity per HDD An external eSATA HDD can be connected to the eSATA port on the rear panel as shown on the next page Note that an eSATA port does not supply power to the device connected to it the external device must supply its own power a2 Saxe You may connect an external HDD while the product is in operation However ANI this may result in certain models of external HDDs not being detected As such it is recommended that you connect any external HDD by following the steps outlined below 1 Turn the product off 2 Connect the external HDD also turned off to the product with an eSATA interface cable 3 Turn on the external HDD 4 Turn on the product The eSATA cable is not included with the product fio ii mM wy mo For a list of compatible HDDs please refer to OS 2A A S U CH 3 1 5 Sensor The following are specifications and operating conditions for sensor input Input Types N C N O Spec Supported Sensor Types Dry Contact sensors Connection Type Attach stripped wire connections to the terminal block Power Output Current Typical DC 12mA Please refer to the diagram on the next page to connect sensor inputs It ill
7. Shutting the System DOWiieicwaciies wei siewandawn eto eee 82 5 29 NetW r K SEUD irii a a a 83 5 2 1 Monitor Ethernet Port Setup 2 0 00 cccccceececcesecceeeesseeeeseaeeeseaeeeseaseeseaseseeessees 83 5 2 2 Source Ethernet Port S tup cc ccccccsecccceceeceeeesseeeseeeeeseeeeseeeeseeeeseeeessaes 86 5 2 3 Storage Ethernet Port Setup cccccccsseccccseseeccesseeeceeseeessesseecsegseesseeeeessageees 87 5 3 ADD Mod SOUP wzcrccatis cari cet Saati cratah sedate iautalau sa sntedandecnshoseraotavaosl Widualacsenieedanin 88 5 4 REMOVING ADDS aiara o a a oieasneadessteenmadenines 91 5 5 FOFMAWING HDDS srnir ea aa aaa aai aE 92 5 5 1 Formatting a Single Internal HDD ccccceccceeseeeeeeeeeeeeesseeeeeeeeeeeeesaaeeeesaaeees 92 5 5 2 Formatting All Internal HDDS sicisaccciecsvexcsve ta caxelatangce ach evedevs ance te temeesintaadsasensteneds 93 5 5 3 Formatting a single External HDD sivicessiiceciedistiteade overt eetininte lisesi dado ies 93 5 5 4 Formatting All External HDDS ccc ccceecceceeeeeceeeeeseeeesaeeeesaeeeeseeeeeseeeeseneeesees 95 5 0 0s FORMARING All HDDS eriein eran ia dante weseabuaacdentensedans 96 Troubleshooting rnia a a a r A 97 PrOGUCl Specific ANIONS ssar aaa a a a 99 Product DIMENSIONS isis a ence hm ceee sbi eoeitccaanwacadvececdeiees 101 Chapter 1 Overview This digital video recorder plus disk player features HDD storage and playback capabilities for 64 32 channel dig
8. a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network 113 Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying 7 Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of i
9. up to 4 HDD each Up to 4 NAS connections CIFS Samba 2 User Level 20 x 2 status display Screw terminal 2 inputs NO NC Screw terminal 2 relay outputs NO NC Notification via e mail 3 RJ 45 100 1000 Base T 1 RJ 45 100Base T RS 232C 2 USB 2 0 ports firmware upgrade 4 External SATA ports Samsung Techwin network products AXIS network cameras VAPIX MPEG4 Modes limited some functions 100 240 V AC 10 50 60 Hz Auto ranging Max 110W with 1xHDD Max 130W with 4xHDD 5 C 40 C 41 F 104 F 0 RH 60 RH 430 x 88 x 501 mm 16 92 x 3 46 x 19 73 Approx 11kg 24 25 Ib For mounting one unit in an EIA 19 inch rack English FCC Class A CUL UL listed CE Class A 100 Product Dimensions EEE 64 LOS STEH i i d i Th cen l 430 16 92 9b 88 101 Open Source License Report on the Product The software included in this product contains copyrighted software that is licensed under the GPL LGPL You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help cctv samsung com If you want to obtain the complete Corresponding Source code in the physical medium such as CD ROM the cost of physically performing source distribution might be charged eGPL Software linux kernel Sysvinit dosfstols wget msmtp busybox c
10. written license or stated as exceptions the above requirements apply either way 8 Termination You may not propagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means this is the first time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 9 Acceptance Not Required for Having Co
11. 12 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 13 The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever published by the Free Software Foundation 14 If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make excepti
12. 192 166 7109 192 168 7108 SNG 6 70 oMP 1000 SNG 650 oND 660 SND S60 SND S60 SND S60 SMD 660 oND 660 SND 660 oND G60 SND 660 SND S60 SND S60 SND S60 oND 660 oND 660 oND 660 SND 660 SND S60 SND S60 SND S60 oNG 6 70 oNG 6 70 SoMP 10004 SNG 870 SNG o 70 aNC 570 SNG o 70 SNG 6 70 oNG 6 70 oNG 6 70 SNG 870 Camera Search Close Select a camera on the list and then double click on it or simply click Select The Model Connection Type IP and Connection Port options of the camera will be automatically set up depending on the settings of the camera Model oMs 100 hi Connection Type IP 192 168 100 121 4000 Connection Port axe al Camera Search does not always find all the cameras on the network you may IA N have to click more than once to find all the camera s you want AA N New settings are applied only if you click oo awy Note OZ If you see a message of Setup fail bitrate exceeds or Setup fail framerate exceeds see the figure below you cannot add a camera any f more Caution x SAN Message SAN Message tup fail bitrate exceeds _ Setup fail framerate exceeds Close Close 4 6 5 HDD Setup From this page you can configure the storage devices connected to the system Repeat Recording off i On Division Record Start Tim Record End Time Total Size l y Tgi E gr IRAD TE RAIDS MOD 2009 03 04 1 Externale Z oT316061 S54 NAS 1 NAS con
13. A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those functions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus t20 any associated interface definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does _ You may copy and dis
14. REPAIR OR CORRECTION 16 Limitation of Liability INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 17 Interpretation of Sections 15 and 16 If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee END OF TERMS AND CONDITIONS GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyright C 1991 1999 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed This is the first released version of the Lesser GPL It also counts
15. The screen shown below appears where you can use and V to select the HDD to format l Internal HDD 2 External HDD 2 External HDD 3 All HDD A Caution Do never format the HDD in the middle of building rebuilding RAID configuration 5 5 1 Formatting a Single Internal HDD Under HDD Format select 1 Internal HDD and then press Enter l Individual HDD 2 All Internal HDD 1 Select 1 Individual HDD and then press Enter HDD Number to format Internal HDD 1 Use the v buttons to select the number for the HDD to format then press ENTER Format HDD 1 Yes Enter No Esc formatted To move back to the previous phase press ESC To cancel formatting and move back to the main screen hold down ESC for 2 seconds or longer Formatting HDD is in Progress 92 HDD Format DONE When selecting an HDD that is not available or connected the following message appears Internal HDD 1 is empty Check HDD to format Please Try Again hy on ed 1 O 3 Q gt 5 i i L g g Under HDD Format select 1 Internal HDD and then press Enter l Individual HDD 2 All Internal HDD 2 Select All HDD and then press Enter Format All HDD Yes Enter No Esc Upon pressing Enter the following messages appear while all internal HDDs are being formatted To move back to the previous phase press ESC To cancel formatting and move back to the main screen
16. Viewer To use RIP RTSP select Enable in the Use RTSP menu and then change the RTSP and RIP port numbers in the Settings menu RTSP is used to control video and RTP is used to transfer video data The Multicast option is useful when sending video to multiple users simultaneously without consuming too much bandwidth Multicast is available only within a local network that is configured with a multicast enabled router it cannot be used via the Internet a The RTSP port number cannot be identical to the number of the connection Ee ea port for the Monitor Ethernet Port i Please be advised that you should not change the address unless you are familiar with the RTP multicast protocol The default Multicast address is 224 0 1 1 RTSP monitoring is applied only to a MPEG compliant camera H 264 and JPEG compliant cameras are not supported Note 61 To connect your computer to the product and watch video via RTP RTSP please aN follow the instructions below For a video player we recommend using VLC Note Media Player Some players such as Quicktime may not function correctly as they do not support interlacing VLC Media Player s menu configuration may vary depending on its version Version 0 9 8a or higher 1 In the Network Setup page select Enable in the Use RTSP menu To use Multicast select Enable in the Use Multicast menu 2 Install and run VLC Media Player in your computer Under the Media menu select Open
17. an FAW Version Application P 139 Show Detail Kernel K 18 System R 32 Web Page W 21 F W Upgrade To upgrade the firmware of the product click under the F W Upgrade menu and then select a firmware file to upgrade 67 Selecting a firmware file activates under File Open Click it to begin upgrading the file evene DOS 12 7075 File Open File Send EN To download the latest firmware files please visit Support gt Download Center at ES www samsungcctv com Note Upon completing the upgrade progress the system automatically reboots itself you will be disconnected from Web Viewer The system requires approximately 2 minutes to reboot and establish a network connection Set Default resets the settings of the Record Event Camera and User menu For more information about the default settings value please refer to 2 3 Default Settings Import Export Configuration You can save the product s current settings as a file and then use the file to restore the settings in the future To save the current settings of the product as a file click the button and then set the filename and path To reboot and restore old settings from a file click the button and then select a settings file A Caution When importing old settings if the old RAID settings are different than the current all the internal HDD data will be deleted 68 4 7 2 System Log You can view the System Log on
18. as different from the original version or _ d Limiting the use for publicity purposes of names of licensors or authors of the material or _ Declining to grant rights under trademark law for use of some trade names trademarks or service marks or _ f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered further restrictions within the meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restriction but permits relicensing or conveying under this License you may add to a covered work material governed by the terms 114 of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with this section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately
19. as the successor of the GNU Library Public License version 2 hence the version number 2 1 118 Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This license the Lesser General Public License applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it You can use it too but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case based on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are informed that you can do these things To protect your rights we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if yo
20. distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to th
21. hold down ESC for 2 seconds or longer Formatting HDD is in Progress HDD Format DONE oh on Ti O 3 Q m x lt oe 1 m z UO g Under HDD Format select 2 External HDD and then press Enter Bay Number to format External Bay 1 Use and V to select the number for the external HDD bay containing the HDD to format then press Enter 93 l Individual HDD 2a oi HDD in Bay 1 94 1 Select 1 Individual HDD and then press Enter HDD Number to format Internal HDD 1 Use and V to select the number for the external HDD bay containing the HDD to format and then press Enter Format HDD 1 Yes Enter No Esc Formatting HDD is in Progress HDD Format DONE When selecting an HDD that is not available or connected the following message appears External Bay 1 is not connected External Bay 1 is not connected Under HDD Format select 2 External HDD and then press Enter Bay Number to format External Bay 1 Use and V to select the number for the external HDD bay containing the HDD to format and then press Enter l Individual HDD 2 All HDD in Bay 1 2 Select All HDD in Bay and then press Enter Format Bay 1 Yes Enter No Esc 95 Upon pressing Enter the following messages appear while the entire HDDs of the selected external bay are being formatted To move back to the previous phase press ES
22. information about sensors please refer to the user s manual of each sensor Event Input Output Group Event Input Group defines a group of events that may occur in cameras and the Network Video Recorder Event Output Group defines a group of responses that cameras and the Recorder may take for a particular event Click under either Event Input Group or Event Output Group to see the following screen This screen also appears when selecting a group and then clicking AAA or simply double clicking on a group 46 Local Sensor Type Sensor Nor ma Open I Event Input Source chO1 SNP 1000 192 168 759 chO2 SNP 1000 192 168 7124 L sensor L sensor chi4 SNP 1000 192 168 752 SRN 6450 Apply Close Enter a new group name in the Input Group or Output Group pane The list below the panes displays the channel camera names along with the product To display available Input Event or Output Event sources double click on a camera or the product For Input Group available options include Sensor and MD Motion Detector and Relay E mail and Beep for Output Group For more information about input and output signals for cameras please refer to the user manual of each camera Check on all options to include them in the new group and then click to create the group via the Add button or apply new settings via the Modify button closes the Group Settings window without creating a group or saving new settings
23. its contributor version In the following three paragraphs a patent license is any express agreement or commitment however denominated not to enforce a patent such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 3 arrange ina manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the p
24. job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permission to use a particular library in non free programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each licensee is addressed as you
25. menu click the buttons at the bottom of the video screen To move between OSD menus and change the settings use the arrow buttons To move to a sub menu or apply new settings click the SET button To move back to the previous menu click the ESC button Instead of the SET and ESC buttons on the video screen you may also use the and buttons next to the GC button For detailed instructions on setting up an OSD please refer to the user manual for the respective camera Control of PTZ operations Preset and OSD is not available in AXIS camera Note 36 4 5 Playback Click at the top of the screen to display the Playback screen This screen lets you watch saved videos There are two ways to use the Playback option enables you to search and watch videos by the recorded time and date while Qevent lets you view videos according to events that have occurred When connecting to the Playback screen for the first time the Time Search menu appears as the default 4 5 1 Time Search POLIS mooc EAA TEE EST TSE monn Orman aaa March 2009 S Mm j w T f S Channel Enables selecting a channel To watch a video conveniently select a date on the calendar under the Channel button Dates available with videos are displayed in blue e g oL Time Area While the video screen is paused selecting a time and clicking the Play button plays a video at that time While a video is being played the Time area displays th
26. or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that there is no warranty for this free software For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although the manufacturer can do so This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL to prohibit the practice fo
27. performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual copies of the object code with a copy of the written offer to provide the corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b d Convey the object code by offering access from a designated place gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge You need not require recipients to copy the Corresponding Source along with the object code If the place to copy the object code is a network server the HIZ Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the C
28. source along with the object code _ Aprogram that contains no derivative of any portion of the Library but is designed to work with the Library by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a derivative work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law If such an object file uses only numerical parameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of the Library will still fall under Section 6 t22
29. the Library is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it 10 Each time you redistribute the Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties with this License 11 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse yo
30. the current video REW and gt FFW Buttons Rewind fast forward and adjust the play speed of the current video While a video is being played the buttons change to xox fax fox l anl and ax indicating the play direction and speed The adjusted play speeds are 1x 2x 4x and 8x backward and forward Each time the REW or FFW button is clicked the play speed changes by one level PLAY Button Plays a video While a video is playing it changes to the CA PAUSE button Clicking the PAUSE button pauses the current video D Stop Button Stops a video Al 4 6 Config The following screen appears when at the top of the screen is clicked Clicking on a button on the left menu directs you to the corresponding page iPOLIS Network Security Solutior Record Setup Event Setup Camera Setup HDD Setup Network Setup Time Setup Aadmin E Logout Help as Status Channel 01 SNP 3371X 3302x 192 168 17 71 Live Input Size 2804kbps Live Video Loss Rate 0 00 Live Audio Loss Rate 0 00 co Record Input Size 2479kbps Record Video Loss Rate 0 00 Record Audio Loss Rate 0 00 Total Information EE Total Live Input Size 38487kbps Total Live Video Loss Rate 0 00 Total Live Audio Loss Rate 0 00 Total Record Input Size 38593kbps Total Record Video Loss Rate 0 00 Total Record Audio Loss Rate 0 00 Total Configured BW size 55296kbps Description f Ch C
31. the library If this is what you want to do use the GNU Lesser General Public License instead of this License GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright 2007 Free Software Foundation Inc lt http fsf org gt Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundation use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things 108 To protect your rights we need to prevent others from denying you these rights
32. this page Log Kind System Log Time 2009 03 04 23 13 43 2009 03 04 23 13 42 2009 03 04 23 13 42 2009 03 04 23 13 36 2009 03 04 23 12 16 2009 03 04 21 26 42 2009 03 04 18 23 01 2009 03 04 18 23 01 2009 03 04 18 23 01 2009 03 04 18 22 51 2009 03 04 04 16 23 2009 03 04 04 16 22 2009 03 04 04 16 22 2009 03 04 04 16 15 2009 03 04 04 10 38 2009 03 04 04 10 32 2009 03 04 04 00 36 2009 03 04 04 00 29 2009 03 01 21 10 28 2009 03 01 21 06 05 2009 03 01 21 04 38 2009 03 01 12 26 02 2009 03 01 09 36 48 2009 03 01 09 36 47 2009 03 01 09 36 47 2009 03 01 09 36 40 2009 03 01 09 32 38 2009 03 01 09 32 36 Event Log Type Config Changed Config Changed Config Changed Power On Power Off Raid Rebuild Start Config Changed Config Changed Config Changed Power On Config Changed Config Changed Config Changed Power On Config Changed Config Changed Config Changed Power On Raid Build Start Raid Build Start Raid Build Finish Raid Rebuild Start Config Changed Config Changed Config Changed Power On Config Changed Config Changed Network Page Record Page Raid admin Network Page Record Page Network Page Record Page Record Page Network Page admin Raid admin Raid Raid admin Network Page Record Page Record Page Log Kind lets you choose which log to view Event Log or System Log displays the product operation logs while displays the logs of Event inputs sent from connected cameras Selecting a log
33. type in the Type option displays only that type of logs To see the history of the system settings changes or event group changes double click on a log file of the Configuration Changed or Event Group Created type The details appear as shown in the screenshot below Ip Ghannel4 by admin 192 168 7126 gt 192 168 7123 Move wi po i i moves to the previous or next page To move directly to a page and enter the page number in the text box and then click p Move To save a system log file to your computer click Export 69 Bx A Up to 10 000 logs each for System Logs and Event Logs can be saved If the number of either log exceeds 10 000 the system automatically deletes the oldest Note logs The following chart displays the various log types lt System Log gt TO Log in Failed Attempted to login but failed Log out Use logout DDNS Reg Failed Failed to register DDNS lt Event Log gt 71 4 7 3 User Setup On this page you can set the Admin password and set the ID password and privileges for the User account Admin Old Password Mew Password Re type Mew Password Apply z User User IO user Passware sessed Authority Monitoring Playback PTZOSD Control Apply In Admin you can set a new Admin password Enter the current password in Old Password enter a new password in New Password confirm the new password in Re type New Password then click t
34. wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW 106 EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF
35. 0 8080 is the product access address for Web Viewer The connection port is used to connect your computer to the product after the http connection is established You can activate or disable ATC in the ATC Mode menu ATC automatically adjusts the video quality depending on the network s connection status Monitor Ethernet Port supports DDNS By registering your product with a DDNS server you can connect to the Monitor Ethernet Port from outside by using the DDNS server ID instead of the product s IP address If you are using either PPPoE or DHCP to connect to the Monitor Ethernet Port you ll be assigned a n ew IP address each time you connect the product to the network DDNS is especially useful in these circumstances Ze Using DDNS 1 Register as a member on iPOLiS home page www samsungipolis com Note 2 Log in and register your NVR with the product registration menu in MY IPOLIS Be sure to check for duplicate domains when you register your domain You can check if your product has been registered normally on the Product List 3 Next set DDNS Use to Enable enter www samsungipolis com in Server Domain without the quotation marks and finally type in the ID and password you registered with at the iPOLIS home page 4 You can view the connection status for your registered product s on iPOLiS Product List ON means that the product is connected to DDNS 5 Click Connect to Product on the Product List to connect to
36. 47 Output Source Duration Isse xl For Output Group Output Source Duration is available to add and modify Beep and Relay actions duration can be set from 1second to always to make actions keep operating once an event occurs To delete a group select a group in a group list and then click inact Event Action Group Event Action Group links Event Input Group and Event Output Group into one functional unit so that when an Event included in the Event Input Group occurs all the responses included in the Event Output Group are included Click under Event Action Group list and you ll be directed to the screen shown below This screen also appears when selecting a group and then clicking ionic or simply double clicking on a group Local Sensor Type sensor Normal Open SIU eam Normal pen Output Group Model Ch IP Model EventType SNF 1000 Ch2 192 168 7 124 SNP 1000 relay1 SRN 6450 relayi SRN 6450 email SRN 6450 beep f Apply if Close First enter a new group name in Group Name Then select Event Input and Output Groups in the Input Group and Output Group list Events registered for the selected Input and Output Groups are at the bottom of the screen Click to create the group closes the Group Settings window without creating the group To delete a group select a group in the Group list and then click premen 48 a Deleting an Input or Output Group deletes an Action Grou
37. A camera camera Up to 160fps 2048x1536 Up to 60fpos 2048x1536 Up to 320fps 1280x1024 Up to 120fps 1280x1024 Up to 1 280fps 704 x 480 Up to 480fps 704 x 480 Record Rate NTSC Up to 1 920fps 704 x 240 Up to 960fps 704 x 240 Recording Up to 1 920fps 352 x 240 Up to 960fps 352 x 240 Up to 1 152fps 704 x 576 Up to 480fps 704 x 576 Record Rate PAL Up to 1 600fps 704 x 288 Up to 800fps 704 x 288 Up to 1 600fps 352 x 288 Up to 800fps 352 x 288 Manual Schedule Normal Event Continuous Up to 60sec Search amp Time Event Calendar Playback REW FWD Depends on CMS Automatic Automatic Transmission Control Remote Users 5 Users simultaneously Maximum Network Protocol Support TCP IP DHCP DNS DDNS HTTP ARP ICMP NTP RTP RTCP RTSP CMS Software Net I Viewer Built in web server Monitoring Storage Maximum Capacity Up to 20TB using external storage option 99 Internal HDD zy gt if External HDD NAS Security Password Protection INTERFACE Monitor DOT Matrix LCD Inputs Alarm Outputs Remote Notification Ethernet l Serial Interface Connections ep u eSATA Supported IP Cameras GENERAL Input Voltage Electrical l Power Consumption Operating Environmental Temperature Humidity Dimensions WxHxD Weight 4 HDDs Rack Mount Kit Mechanical Language LCD Certification Normal RAID1 RAID5 Normal RAID 1 Up to 4 SATA HDDs Up to 4 expansion bays
38. AV Upgrade File Open z Set Default Set Default Except Network HDD Time Log Set Default ss Export import Configuration Export f Import 29 Use the left menu to set up the product For detailed instructions on each menu item please refer to 4 6 Config and 4 7 System Once a network is set up You can use the Monitor Ethernet Port on the product back panel to connect to the product The IP address for the front port is fixed as 192 168 1 100 this value cannot be changed Note It is strongly recommended that you change the default administrator password Admin PW as soon as possible For instructions on changing the password please refer to 4 7 3 User Setup 30 Chapter 4 Operation 4 1 System Requirements Category Minimum Recommended CPU Intel Core 2 Quad Intel i7 or higher 2 5GHz or higher Main Memory 3GB 4GB or higher Video Memory 1GB or higher Display Resolution 1 280 x 1 024 Hard Disk 1GB or higher Operating System Windows XP Professional Windows Vista Business Windows 7 Network Gigabit Ethernet Miscellaneous DirectX 9 0 or higher 4 2 Compatible Web Browsers Web Viewer is optimized for use with Microsoft Internet Explorer 6 0 or higher You must have Microsoft Internet Explorer 6 0 or higher installed on your PC to ensure trouble free operation of Web Viewer ol 4 3 Login Open a web browser and then enter the IP address of the product You are directed to the login p
39. C To cancel formatting and move back to the main screen hold down ESC for 2 seconds or longer Formatting HDD is in Progress HDD Format DONE mde tk pn Ti O 3 gt ma UO g Under HDD Format select 3 All HDD and then press Enter Format All HDD Yes Enter No Esc Upon pressing Enter the following messages appear while all HDDs both internal and external are being formatted To move back to the previous phase press ESC To cancel formatting and move back to the main screen hold down ESC for 2 seconds or longer Formatting HDD is in Progress HDD Format DONE 96 Troubleshooting 1 Cannot boot Check power Check power cord 2 Some channels fail to display video Check camera power Check camera video output Check Recorder s input port 3 Video is not stored Check the connection of HDDs on the HDD Setup page Check the free space of HDDs Check video recording setup 4 Stored video does not play Check video recording setup 5 Video is too bright or too dark Check camera setup 6 Front panel buttons do not work Check power Check Key Lock status 7 Network does not function Check network cable connection Check Recorder s IP setup Check PC s IP setup Run Ping Test f Web Viewer fails to show video on a PC check the PC s technical specifications oi 8 You must contact your ven
40. D or its RAID EN array However if another HDD or another HDD array is available then new Note data is saved in the HDD or array The HDD disk checking option is available only for internal HDDs 5 1 7 Shutting the System Down Under System select 7 System Power Off and then press Enter The following message appears prompting you for if you really want to shut down the system Are you sure Yes Enter No Esc Upon pressing Enter the following messages appear while the system shuts down To move back to the previous phase press ESC To cancel shutting down and move back to the main screen hold down ESC for 2 seconds or longer Preparing Poweroff is in Progress System will be down in seconds These messages also appear when the power switch on the product back panel is flicked until the system is completely shut down 82 5 2 Network Setup On the default LCD screen press V to move to the screen shown below and press ENTER 2 Network Setup SET Sub menus will appear where you can use the V buttons to navigate 1 Monitoring Port 2 Source Port 3 Storage Port ne Mi I Hi Why F A a For information on each network setting and its operation please refer to 4 6 6 Network Setup Note 5 2 1 Monitor Ethernet Port Setup The Monitor Ethernet Port is a port used to connect your computer to the product Under Network Setup select 1 Monitor Ethernet Port and press ENTER
41. DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES ORA FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the program s name and an idea of what it does Copyright C yyyy name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program
42. Date Time artim 0412 172251 FE To 09 04 14 02 28 18 H Search mn o ee Sound Capture Info 4 id REW Lay STOP FFW Search Results Start Date Time End Date Time PRES SUNS 2009 04 12 17 22 51 2009 04 12 17 23 26 2009 04 12 17 25 21 2009 04 12 17 25 44 Area Enables selecting an Event Input Group Area Enables selecting a channel that contains the record of the selected Event Input Group Date Time ee Area Enables selecting the beginning and ending times to search events Button Displays a calendar as shown on the next page enabling you to select the beginning and ending dates and times for searching events Select a date and time and then click Apply 39 April 2009 Today E searches videos with conditions that match a selected event type channel date and time and then displays the first 10 results at the bottom of the screen as shown in the screenshot below To play a video click on a result To check all the 10 results move the in the right of the screen upward and downward own Search Results a ee Start Date Time End Date Time ABEDE 2009 04 12 17 22 51 2009 04 12 17 23 26 2009 04 12 17 25 21 2009 04 12 17 25 44 HEA displays all search results on the left side of the page 10 Search results are displayed at a time Clicking on an item automatically plays a video saved in the selected time BB and amp move to the previous or next results page moves to the previous s
43. ESC To cancel the new settings and move back to the main screen hold down ESC for 2 seconds or longer Server Mode Setup DONE 5 2 3 Storage Ethernet Port Setup The Storage Ethernet Port is used for communication between the product and NAS Under Network Setup select 3 Use Storage Ethernet Port and then press ENTER 1 Use Static IP 2 Use DHCP Client 3 Use PPPoE Use one of the 3 options to set an IP address for Source Ethernet Port For detailed instructions on the port setup please refer to Static IP DHCP Client and PPPoE setups under 5 2 1 Monitor Ethernet Port Setup 87 5 3 HDD Mode Setup O 5 P 4 D 5 N O 99 4 5 Oo N o oe a S Q lt lt P O O lt 49 gt O e 5 4 a O 5 oe N O 4 4 5 D 5 Q P y D 5 Oo D N o M S P 4 s J 3 HDD Mode Setup od SET Sub menus will appear where you can use and V to navigate 1 Normal 2 RAI DI 2 RAI DI 3 RAI D5 Select an HDD operation mode and then press Enter The following warning message will appear Normal is the non RAID mode Warning All Record data will be removed After displaying this warning message for 3 seconds the screen moves to the next screen corresponding to the selected mode Unbuild RAID Yes Enter No Esc Use RAI D1 Yes Enter No Esc Use RAI D5 Yes Enter No Esc Press Enter to change the HDD mode to the sele
44. Network or simply use the shortcut key CtrltN Select RTSP under Protocol Playback Playlist Tools Help Open File Ctrl 0 Advanced Open File Open Eclder Ctrl F o Open Disc Ctrl D Coen Metwork Ctrl hy af n Capture Device Ctrl C Convert amp Save Ctri A Streaming Ctrl s 3 Quit Ctrl File Disc Network Capture Device Network Protocol Protocal Address Port RTSP w irtsp 192 168 1 10 3000 ch 1_mpeg4_2009_0405_0930 stw 1234 Options Allow timeshiting C show more options E CE Cee 4 Depending on the type of a video enter an address as from the examples in 62 the following chart and then click Play When using the default RTSP port number 554 you may skip entering the port number rtsp lt IP gt lt Port gt ch lt channel gt _mpeg4 stw Live Multicast rtsp lt IP gt lt Port gt mch lt channel gt _mpeg4 stw rtsp lt IP gt lt Port gt ch lt channel gt _mpeg4 _ Unicast lt YYYY gt _ lt MMDD gt _ lt HHMM gt stw Recorded rtsp lt IP gt lt Port gt ch lt channel gt _mpeg4 _ Multicast lt YYYY gt _ lt MMDD gt _ lt HHMM gt stw i e If the Monitor Ethernet Port IP address is 192 168 1 10 with the RTSP port as 3000 enter rtsp 192 168 1 10 3000 ch1_mpeg4 2009 0405 0930 stw to watch a video from Channel 1 that is recorded on April 5 2009 at 9 30am You can register your e mail add
45. Otherwise if the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work also fall under Section 6 whether or not they are linked directly with the Library itself 6 As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License If the work during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the user can modify the Library and then relink
46. SAMSUNG TECHWIN 32 CHANNEL 64 CHANNEL NVR SRN 6450 3250 User Manual SNR 6400 3200 32 CHANNEL 64 CHANNEL NVR User Manual Copyright 2011 Samsung Techwin Co Ltd All rights reserved Trademark eg samsune Techwin is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of Samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document without prior notice Warranty If the product does not operate properly in normal conditions please let us know Samsung Techwin will resolve the problem for free of charge The warranty period is 3 years However the followings are excluded e Data loss due to a damaged hard disk e f the system behaves abnormally because you run a program irrelevant to the system operation e Data loss due to virus infection e Det
47. Setup HDD Setup Main Menu HDD AutoDeletion RAID Mode NAS Configuration Open Channel List Ch1 Ch16 Select Channel Ch01 Disable Enable Disable Channel Name Ch01 Ch02 ChO3 Model Connection Type Static IP IP 0 0 0 0 Connection Port 4000 ID Password Picture Type MPEG ATC Mode Off Video Quality High Video Resolution D1 Video Framerate 10 SubMenu Default Setting Fane fo i Nas Port Nas1 Use Disable Name Default Folder Password lo Network Setup Main Menu Monitor Ethernet Port DDNS Source Ethernet Port Source DHCP Server Storage Ethernet Port DNS RTP RTSP E Mail Connection Type Static IP IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Gateway 0 0 0 0 Connection Port 4000 Http Port 80 ATC Mode Disable Use Disable Server Domain www samsungipolis com ID Password Connection Type Static IP IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Gateway 0 0 0 0 Use Disable IP Range 0 0 0 0 0 0 0 0 Connection Type Static IP IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Gateway 0 0 0 0 DNS1 168 126 63 1 DNS2 168 126 63 2 Use RTSP Disable RTSP Port 554 RTP Port 4000 Use Multicast Disable Multicast Address 224 0 1 1 SMTP Server Name Use Authentification Yes ID Password E Mail To 16 Time Setup Main Menu Time Configuration NTP 2 3 4 System Page User Main Menu Admin User Date Format Time Format
48. Time Zone Use DST Use Client Use Server Public Server1 Address Public Server2 Address Public Server3 Address Public Server4 Address Public Server5 Address Password ID Password Authority r7 Default Setting mm dd yy 24h GMT 00 00 Greenwich Mean Time Disable Disable Disable pool ntp org asia pool ntp org europe pool ntp org north america pool ntp org time nist gov Default Setting 11111111 user 22222222 Only Monitoring is Allowed Chapter 3 Installation 3 1 Installing and Connecting Product 3 1 1 Supplying Power and Operating the Product Connect the power cord to the product as shown in the picture below AC Power A NS Once the power cord is securely connected press the power switch in the rear panel to boot the system When the product is turned on you can press the power switch briefly to turn off the product When the system has encountered an error and you can t turn it off normally you can press and hold down the power switch for five seconds to force the system to shut down Power Switch 3 1 2 Configuring the Network The following picture is an example of a network diagram using the NVR The 3 network ports on the product back panel are for a computer camera and NAS Network attached Storage Please Refer to 2 2 Back Panel The rear panel network ports can be used for devices within the same network or in different networks as shown in the ex
49. a ete cioni i aint tiga its A 34 AAA OSD COMMON aaen a lcanid cus ta aciuae bedatde dca Mauenaca neds Peaaiaues N 35 A D nP IAVDACK isa E aaa a a a a a aaa aaa aaa 37 Aole TIME Cal CM anaE E A E EE 37 AZ cle VSM o CAGI a a e anal a e aa A tate caaaeas 39 4 6 CONTO caaan a a a Ea 42 AOT aU Sa a N a a a 43 4 6 2 Record SOUP roai E i ee eh ee 44 AO OE VENUS E UD naana sed neseaatece ated a e a a a A 45 A624 Camera SOUP eset seve tes lind S ztice acl dacynu se ewer ea oanned dined sb dace eeutueaoeytnalt 49 46 0 FID ID SOU ia sn T E a OT 53 4 6 6 NetWOork Setup ccie ae ieee nee eet i ee 59 A Ole IME SCUD a Oe eC RS Cre ne emer eee 64 AT SY SUC a a a Oaa 66 BM Upor E ener E 67 ATA VSEM L OO a a a a aon a T ese eens ee Pen ee ere 69 A TaUSer SEUD eres A A a AR macce el 72 k PE ACK ie te Syrsctetae eeeccen lea aia tote aes duet ea ea se tases chee cova eae nee ele ce ede net ee 73 Chapter 8 LOD S6tUD ciinii 77 Mie VSE a E aE 78 5 1 1 Checking Firmware Version ccccccccccssseecccescecceeeeeecseseeecseueesseuseesssaseeessaneees 78 Oo L2 Tumino OOM Bee purine a a eines auusideatinwn codnids ccaatteusteans 78 co ad es gt r bel nee ee eee ee eee ee re ee ea ee 79 De lA OV SISTING ALC neina ted eects Senccod a a T a 79 5 19 Initializing Settings asiove sees lieehaiant vel oui ly aaidatie estan Ga akdstlenlocslaatexan se nndmbaaaeueeueedastlaadt 80 TEGADO CHECK arrien a tien tot selena outa teas batee tee toe A TN 81 5 1 7
50. age Enter your ID and password then click the Login button to connect to the system You are directed to the Monitoring Page If you have not set up your own ID and password yet the default ID is admin and the default password is 11111111 without the quotation marks For instructions on changing the ID and password please refer to 4 7 3 User Setup GP OLAS renos Sonne EE To connect to the product using the front network port please make sure to ee enter 192 168 1 100 To connect to the product using the rear Monitor Ethernet Port make sure to enter the IP address assigned to the port The connecting port and computer must be within the same network For an HTTP port number with any value other than 80 then the access address is http lt IP address gt lt HTTP port number gt For example if the IP address is 192 168 1 110 and the HTTP port number is 8080 then the address for Web Viewer is http 192 168 1 110 8080 For instructions on changing the Monitor Ethernet Port IP address please refer to 4 6 6 Network Setup Ow 4 4 Monitoring If you are logging in to your Network Video Recorder for the first time or if you click the button at the top of Web Viewer you will be directed to the Monitoring Page where you can view the video feeds from the cameras connected to your product irPOLiS Network Secuirt t J Monitoring i Q Playback B O Config deel 0 4 In Logout Help A Auto sequence Group
51. ample diagram 18 LAA IP Camera Connection Local Area Network 3 1 3 Internal HDD Open the HDD Bay as shown below to add remove or replace an internal HDD to open the Locking Door 4 Press PUSH amp 2 Turn Key Lock counterclockwise to unlock 19 3 Open the HDD Door ee gore HHH Unscrew the fixture screws on the SATA Bracket before removing the HDD fasten the screws securely after you insert the HDD in the SATA Bracket 20 6 Make sure that the SATA Bracket is pushed back all the way in the HDD Bay and close the HDD Door 7 Turn Key Lock clockwise to lock Close the Locking Door 21l When adding a new unformatted HDD the product automatically formats the HDD Formatting HDD is in Progress displaying the formatting process in the front LCD Internal HDD 2 Added successfully Upon completing the formatting process the message above is displayed in the LCD along with a blue indicator in the HDD LED indicating that the new HDD is ready to use Note A Caution A Caution W al y 10 ri mM we mo go iN For a list of compatible HDDs please refer to amp LICt 7 co ea Do Not remove an HDD while the product is in operation To safely remove HDDs please refer to 5 4 Removing HDDs To lock the HDD door please make sure to turn Key Lock clockwise completely 3 1 4
52. arties receiving the covered work authorizing them to use propagate modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it 116 A patent license is discriminatory if it does not include within the scope of its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyed by you or copies made from those copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law 12 No Surrender of Others Freedom If conditions are imposed on you whether by court o
53. ash drive the firmware update might not install properly To download the latest firmware files please visit Support gt Download Center at www samsungcctv com Under System Select 4 System Update and then press Enter If a USB flash drive containing a firmware update file is detected the system displays a message prompting to see if you want to continue or stop updating as shown in the illustration below Warning All actions will be stopped Update Firmware Yes Enter No Esc 19 When pressing Enter the following messages appear while the firmware is being updated Once the update process is complete the system automatically reboots itself To move back to a previous phase press ESC To cancel the update and move back to the main screen hold Q own ESC for 2 seconds or longer System Update is in Progress System will reboot after 5 seconds Rebooting system is in Progress lf a USB flash drive is not inserted into the product back panel USB terminal the following error message appears There s no usb stick Check usb please If a USB flash drive is inserted but does not contain a firmware update file the following error message appears No f w file in usb Check usb please 5 1 5 Initializing Settings Warning All actions Will be stopped Are you sure Yes Enter No Esc Upon pressing Enter the following messages appear while settings are being initialized When ini
54. c software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 If you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjh cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED INNO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence 128 Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the E
55. causing data loss During use of the RAID you should never perform Remove HDD from the LCD menu whatsoever If any one HDD of the pair fails during RAID operation it is necessary to replace the defective HDD as soon as possible in order to restore the system stability NAS Up to four NAS devices can be connected each NAS is referred to by its NAS Port Choose a NAS Port to view or change its configuration Use lets you determine whether to use the selected NAS Port or not Name lets you assign a name to the NAS device NAS Name displays under the Model category in the HDD list at the top of the screen Default Folder lets you specify a folder on NAS to save recorded video Enter the IP address login ID and password for the NAS in IP ID and Password respectively of Only the CIFS Samba file system is supported for NAS ports N NAS name and default folder name can contain a maximum of 32 bytes i e Note 32 alphanumeric characters English ANAS HDD may not appear in the HDD list if it is turned off at the time when the product is turned on for the first time or the product fails to connect to the HDD for other reasons In these cases the product is unable to connect to the NAS HDD automatically even if the problem is resolved To connect to the NAS HDD you must change settings to Disable and then change back to Enable f a connected NAS HDD becomes disconnected from the product its status in the HDD l
56. creen ain Search Results No DateTime range 2009 04 12 17 25 21 2009 04 12 17 25 44 2009 04 13 04 38 34 2009 04 13 04 38 53 2009 04 13 04 43 30 2009 04 13 04 44 08 2009 04 13 04 44 23 2009 04 13 04 44 41 2009 04 13 04 48 35 2009 04 13 04 48 55 2009 04 13 04 49 02 2009 04 13 04 49 18 2009 04 13 04 54 31 2009 04 13 04 54 48 2009 04 13 05 19 02 2009 04 13 05 19 20 2009 04 13 08 07 31 2009 04 13 08 07 46 2009 04 13 08 09 21 2009 04 13 08 09 45 SE Eae AlResults 2009 04 12 17 22 51 2009 04 12 17 23 26 2009 04 12 17 25 21 2009 04 12 17 25 44 Copyright 2009 SAMSUNG TECHWIN CO LTD 40 The maximum searchable period is 7 days f more than 500 event video files are recorded within a selected search period data saved on the day for which 500 or more accumulated video files are recorded is searched but data saved on the day after is not searched For example if video files are searched from 10 to 15 and 800 accumulated video files are saved by 11 the program will not search Note data saved after 11 and will display search results only up to the 800 file Events that occurred during Normal Record mode cannot be searched Sound Button Turns audio on or off for the current video A Capture Button Captures a screenshot of the current screen in JPG format Info Button Displays the channel name and recorded time of the current video E DIT Button Activates or disables the Deinterlace option for
57. ct you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker 126 signature of Ty Coon 1 April 1990 Ty Coon President of Vice OpenSSL LICENSE Copyright c 1998 2006 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl cor
58. cted mode To move back to the previous phase press ESC To cancel the new settings and move back to the main screen hold down ESC for 2 seconds or longer While the new RAID mode is being configured the following messages appear in order informing of the progress and remaining time Preparing RAI D1 is in Progress Rebooting system is in Progress 88 Build RAI D1 48 8 Finish 37 6min RAI D1 Setup DONE When RAID1 or RAIDS is selected Unbul ding RAID is in Progress Rebooting system is in Progress Unbui ding RAID DONE When Normal is selected If the HDD is already set to the new RAID mode the following message appears Current HDD mode is RAI D1 mode Current HDD mode is Normal mode Check HDD mode and Please Try Again If the number of equipped HDDs is not enough the following message appears RAID requires at least 2 HDDs to be equipped next to each other HDD1 and HDD2 or HDD3 and HDD4 and RAID5 requires all 4 HDDs to be equipped There are not enough HDD to build RAI D5 Check HDD mode and Please Try Again Se RAID Redundant Array of Independent Disks helps you keep data safe in Ae case the system HDD is damaged Selecting RAID1 configures HDD1 and HDD2 as one array and HDD3 and HDD4 as the other array RAID1 uses 2 physical HDDs as 1 functional HDD For instance configuring HDD1 and HDD2 while each is equipped with a 500GB HDD to RAID1 d
59. deo files T3 Search Type Event amp Channel Input Group channel H Index o li 2 13 4 15 I 6 7 2 E 1 i 12 B g Mm in B tu PP Lhe a eke Ye eke Start Time 2009 05 13 21 13 06 2009 05 15 21 13 45 2005 05 15 21 14 25 2009 05 13 21 14 35 2009 05 13 21 15 00 2009 05 13 21 15 08 2009 05 15 21 15 33 2009 05 13 21 15 55 2009 05 15 21 16 22 2009 05 13 21 16 30 2009 05 15 21 17 16 2009 05 13 21 17 30 2009 05 13 21 18 35 2009 05 13 21 18 47 2009 05 13 21 18 58 2009 05 13 21 19 40 2009 05 15 21 20 02 Date Time From To End Time 2009 05 15 21 15 15 2009 05 15 21 13 53 2009 05 15 21 14 79 2009 05 13 21 14 50 2009 05 13 21 15 04 2009 05 15 21 15 71 2009 05 13 21 15 39 2009 05 13 21 16 02 2009 05 13 21 16 24 2009 05 13 21 16 37 2009 05 15 21 17 74 2009 05 15 21 17 42 2009 05 13 21 18 41 2009 05 15 21 18 54 2009 05 15 21 19 05 2009 05 13 21 19 46 2009 05 13 21 20 09 Search Backup Select All Download To back up specific event video files use the Event button and search events Selecting an Event Input Group in the Input Group pane displays a list of channels that contain the selected event video files Select a channel select desired times in the From and To panes and then click the button to display a list of the selected event video files that are saved within the selected period Select backup video files in the list and then click the button to start back
60. dor when If you are experiencing any of the following issues you must stop using the product and turn the power off immediately then contact your vendor for assistance If you need to add or replace a HDD Product is behaving strangely example unusual noises smells or smoke is coming from the product The power cable connector has been damaged Rain or other liquid has entered the product You have spilled liquid into the product or foreign material has entered the product The product does not work as specified in this instruction manual The product has been dropped and severely damaged There is a noticeable degradation in the performance of the product Before installing an additional HDD or connecting an external storage device en USB memory or USB HDD to this DVR check the compatibility For the Nota compatibility list contact your retailer 98 Product Specifications SRN 6450 SNR 6400 SRN 3250 SNR 3200 DISPLAY Video IP Camera Inputs 64 channels 32 channels 1 4 9 16 36 64 channels 1 4 9 16 32 channels Live simultaneously simultaneously Web Support Search 1 channel Control Pan Tilt Zoom Focus for available camera Configuration IP Port ID Password Picture type Video Quality Resolution Framerate PERFORMANCE Compression IP H 264 MPEG 4 M JPEG supported by the connected camera Up to 48Mbps Up to 8Mbps each Up to 36Mbps Up to 8Mbps each Bandwidth Record Rate MEG
61. drtools dvd rw tools iconv smartctl uboot minicom openssl bash Im_sensors e LGPL Software glibc vmstat inetutils eOpenSSL License OpenSSL GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you Know you can do these things To protect your rights we need to make restriction
62. e The current date of the product is highlighted in blue The current date of your computer is circled in red on the calendar as well as written on the bottom of the calendar To move to the previous or next month click or atthe top of the calendar To change the current date click on a date on the calendar 64 03 06 2009 jozi EE March 2009 Sun Mon Tue Wed Thu Fri 7 99 Of OF Of oF D 22 29 24 eo 2D gi 1 2 4 5 8 9 10 11 12 13 15 16 17 18 19 20 M22 23 24 Fy 28 27 Bog 90 31 1 2 3 25 2009 Date Format lets you choose either yy mm dd mm dd yy or dd mm yy for displaying the current date yy is year mm is month and dd is day You can choose between 24 hour and 12 hour time formats for displaying the current time in Time Format Click Time Zone to select your time zone and city If your city observes Daylight Saving Time it will be applied automatically You can also manually decide whether to use DST or not with DST Use You can choose to use an NTP client and NTP server in the NTP menu NTP Network Time Protocol synchronizes the time among the various devices and systems connected to a network NTP client automatically communicates with registered NTP servers to adjust its time setting To use an NTP server other than the default one change Public Server Address BE Changing the GMT settings automatically changes Current Time N Synchronizing the time settings of the NTP server and the product may ta
63. e Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the library s name and an idea of what it does Copyright C year name of author This library is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details You should have received a copy of the GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to conta
64. e openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tjn cryptsoft com Original SSLeay License Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is 127 an SSL implementation written by Eric Yo
65. e recorded time of the video Sound Button Turns audio on or off for the current video A Capture Button Captures a screenshot of the current screen in JPG format Info Button Displays the channel name and recorded time of the current video p DIT Button Activates or disables the Deinterlace option for the current video ot REW and Gia FFW Buttons Rewind fast forward and adjust the current video play speed While a video is playing the buttons change to 0x d l fare re zl l and ax indicating the play direction and speed The adjusted play speeds are 1x 2x 4x and 8x backward and forward Each time the REW or FFW button is pressed the play speed changes by one level Playback or movement by the frame is not supported PLAY Button Plays a video While a video is playing it changes to the GA PAUSE button Clicking the PAUSE button pauses the current video D Stop Button Stops a video Move the knob on the slider below the playback screen to seek to a specific video time A time with available video is highlighted in blue on the time slider while a time with event video is in red 38 4 5 2 Event Search Q event displays the Event Search screen as shown in the picture below For detailed information about events please refer to 4 6 3 Event Setup Td MI Network Security Solution Monitoring Q Playback 5 Config a System admin E Logout Help Q Time El Event Down Channel SS
66. een size of the player 1x 2x Full Screen i 104x240 and 704x288 videos can be enlarged by 2x without degrading image quality 12 Save the current screen as a JPEG file 13 Rotate the current screen by 180 14 Turns audio on or off 15 Play List Pending gt Play forward lt 4 Play backward E fll Pause W Stop 16 Activate or disable the Watermark Check option Check 76 Chapter 5 LCD Setup The front panel LCD displays the current time and recording status by default shown below fa a p z j j pie oo a aight a ye lt Gulla j gt J LE d PERE REE iy AL oS j ie Fe ete eee ere 3 S it ee SF Fi bhen Y iPOLIS The first line in the LCD indicates Year Month Day Hour and Minute The second line indicates the number of active channels total channels and RAID mode By using the LCD and the lt A V gt ENTER and ESC buttons located to the right you can check the system s status and change some of its settings Up and Down Buttons Used to move between menus and select letters and numbers in text mode Left and Right Buttons Used to move the cursor in text input mode ENTER Button Moves to the next phase ESC Button When pushed it moves back to the previous phase When holding it down for 2 seconds or longer it moves to the main screen displaying the current time and recording Status en aN The buttons are locked when the front panel
67. eriorated performance or natural worn out in process of time e Sensory phenomenon that does not affect the performance or quality of the product ex working noise Design and specifications are subject to change without prior notice The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product Note that the security and other related issues caused by the unchanged password shall be responsible for the user Preface Thank you for choosing a Samsung Network Video Recorder Disk Player product This instruction manual provides detailed information and instructions for the NVR network DVR products Please read this manual and any supplementary document s thoroughly before attempting to install and or operate the product The contents of this manual and the software and hardware explained herein are protected by copyright law All copy reprint and translation to other languages of a part of or all of the contents of this instruction manual without permission of Samsung Techwin Co Ltd are expressly prohibited except for fair use within the scope of copyright law The specifications of the product may change without prior notice for product improvement Product Warranty and Limited Liability The manufacturer of this product is not responsible for the sale of the product nor does the manufacturer delegate such responsibility to a third party The product warran
68. es is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary General Public License We use this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library 119 The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for linking other code with the library We call this license the Lesser General Public License because it does Less to protect the user s freedom than the ordinary General Public License It also provides other free software developers Less of an advantage over competing non free programs These disadvantages are the reason we use the ordinary General Public License for many libraries However the Lesser license provides advantages in certain special circumstances For example on rare occasions there may be a special need to encourage the widest possible use of a certain library so that it becomes a de facto standard To achieve this non free programs must be allowed to use the library A more frequent case is that a free library does the same
69. esolution Video Framerate Select a video quality resolution and video frame rate Selecting higher settings for these will give you higher quality video at the expense of network bandwidth and disk storage capacity Note The product s maximum frame rate is limited and varies depending on the resolution and RAID settings Refer to the product specifications page The frame rate of a channel with its Picture Type set to JPEG is double that of a channel with its Picture Type is set to MPEG when calculating total frame rate The system is a single stream based device that proceeds with recording and live playback in the camera mode specified in the Camera Setup page Video Mode shows the selected camera s color encoding system NTSC or PAL and cannot be modified The available resolutions differ depending on the network camera For a resolution of higher than 720p no separation between NTSC and PAL exists and the maximum frame rate will be changed accordingly O m mow wm O mw Oww O 50 A Caution If you change the camera settings while in record mode the image recorded at the moment of the change may not be played properly The NVR can be used in connection with Samsung Techwin network products as well as with AXIS products AXIS cameras have however limited compatibility with this product as described below Only AXIS cameras that support both VAPIX and MPEG4 output are compatible with t
70. ess 85 Password i Repeat the steps to enter the login ID and password of the new DDNS server Confirm DDNS Setup Enter Yes Esc No Pressing Enter moves to the next screen as the new DDNS settings are being saved To move back to the previous phase press ESC To cancel the new settings and move back to the main screen hold down ESC for 2 seconds or longer DDNS Server Setup DONE 5 2 2 Source Ethernet Port Setup The Source Ethernet Port is used for communication between the product and cameras Under Network Setup select 2 Source Ethernet Port and then press ENTER 1 Use Static IP 2 Use DHCP Client 3 Use PPPoE 4 Use DHCP Server Use one of the first 3 options to set an IP address for the Source Ethernet Port For detailed instructions on the port setup please refer to Static IP DHCP Client and PPPoE setups under 5 2 1 Monitor Ethernet Port Setup Selecting menu item 4 lets you use the DHCP Server option DHCP Server Setup Press and V to select 4 Use DHCP Server and then press Enter IP Range from 0 Press the V buttons to select numbers 0 9 space and period use lt and gt to move between characters IP Range to 86 Repeat the steps to enter the ending IP address for the range Use DHCP Server Yes Enter No Esc Pressing Enter moves to the next screen as the new DHCP Server settings are being saved To move back to the previous phase press
71. f the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggregate if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate 6 Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machine readable Corresponding Source under the terms of this License in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange b Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License on a durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically
72. g applied the front LCD displays the following messages according to the progress Preparing RAI DI is in Progress Rebooting system is in Progress Build RAID1 48 8 Finish 37 6min RAI D1 Setup DONE Unbuil ding RAID is in Progress Rebooting system is in Progress Unbuilding RAID DONE When the system is in a RAID mode appears on the right Normal RAID RAIDS RAID Status O Apy EE Wbisplays the current RAID status of the system along with the information of RAID configured HDDs 90 SRN 6450 RAID1 Building Build Stop Individual HDD Info TOPOR Model Internal RAID1 A 1 ST3250310C5 Internal RAID 1 A 2 ST3250310CS While building a RAID mode appears in the RAID Status screen Clicking the button aborts the RAID building process RAID Redundant Array of Independent Disks helps you keep data safe in case the system HDD is damaged Selecting RAID1 mode configures HDD1 and HDD2 as one array and HDD3 and HDD4 as the other array RAID1 uses 2 physical HDDs as 1 functional HDD For instance configuring HDD1 and HDD2 while each is equipped with a 500GB HDD to RAID1 displays the system s functional HDD as one 500GB RAID In RAID1 mode no data is lost even if one of the two HDDs of a RAID array is damaged Selecting RAID5 configures 4 HDDs to 1 RAID array RAIDS uses 4 physical HDDS as 3 functional HDDs For instance configuring HDD1 2 3 and 4 while each
73. ge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee 5 Conveying Modified Source Versions You may convey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date 111 _b The work must carry prominent notices stating that it is released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intact all notices _c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work in any other way but it does not invalidate such permission if you have separately received it _ d If the work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions o
74. h the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 103 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If
75. han two RAID configured HDDs are broken or removed from the product the RAID configuration will malfunction causing data loss During use of the RAID you should never perform Remove HDD from the LCD menu whatsoever If any one HDD of the pair fails during RAID operation it is necessary to replace the defective HDD as soon as possible in order to restore the system stability gQ 5 4 Removing HDDs On the main screen press and V to move to the following screen and then press Enter 4 Remove HDD SET The screen shown below appears where you can use and V to select the HDD to remove HDD Number to remove Internal HDD 1 HDD Number to remove External Bay 1 Select the number for an internal HDD or an external HDD bay and then press Enter Upon pressing Enter the following messages appear while the selected HDD is being removed Executing Please Wait Remove Int HDD 1 DONE Remove Ext Bay 1 DONE When selecting an HDD that is not available or connected the following message appears Internal HDD 1 is empty External Bay 1 is not connected Check HDD to Remove Please Try Again BE The number for an internal HDD or external HDD bay is determined depending on which product port that you connect to Available numbers are 1 2 3 and 4 Note from the upper left and right to the bottom left and right Please Refer to Chapter 2 Part Names 91 5 HDD Format SET
76. hat connects the product to the video camera 8 SENSOR IN Used to connect a sensor or alarm RELAY OUT 9 GROUND A terminal that is used to ground the frame to an external device 10 Storage Ethernet Port Used to connect NAS Network Attached Storage within the same network 11 eSATA Port Used to connect an external HDD 12 eSATA Port2 Used to connect an external HDD 13 eSATA Port3 Used to connect an external HDD 14 eSATA Port4 Used to connect an external HDD 15 RS232C Port Unused terminal 12 2 3 Default Settings The following are the factory default settings for the product 2 3 1 Monitoring Page Main Menu Sub Menu Default Setting Auto Sequence i Off Display Mode 16Ch display PT ZF Practvated 2 3 2 Playback Page Main Menu Sub Menu Default Setting Channel Time Calendar Time Event Type Event Channel Date Time 13 2 3 3 Config Page Record Setup Main Menu Sub Menu Default Setting Normal Record Config All frames Input Group own event Active All frames Event Record Config Inactive frames Pre Recording Time 5 Sec Post Recording Time 5 Sec Button Normal Record selected Record Time Table Always Normal Record Event Setup Main Menu Sub Menu Default Setting Sensor 1 Normal Open Local Sensor Type Sensor2 Normal Open Input Group Event Group Output Group Action Group 14 Camera Setup Main Menu Channel List Channel
77. he button The Admin password is used for logging in to the Admin account which is the system administrator account with the highest permissions level In addition to the Admin account you can set up one user account with limited permissions The User account is granted permissions by the Admin under the Authority menu Monitoring and Playback refer to the menus used when accessing the product via Web Viewer PTZ OSD Control refers to the connected cameras PTZ and OSD functions Refer to 4 4 3 PTZ Control and 4 4 4 OSD Control If you wish to change the User account s ID password or privileges you can do so by entering the new ID in User ID entering the new password in Password and checking the permissions to grant to the User account Click to enable the changes TZ A Ge aR New settings are applied only if you click Aon Note 4 7 4 Backup Backup video files from the product to a computer Search Type Time Event amp Channel Date Time Channel choi From To Download Folder C i Change cH nload Stat Backup Download Time To select a recorded period for backup video files click the button Selecting a channel in the Channel dropdown menu displays the channel s recorded period in the From and To panes under the Date Time menu Select the beginning and ending time of the backup video files in the From and To panes and then click the DD button to start backing up the vi
78. his product Audio Encoding G711 u law Camera Search Cannot search Resolution In Camera Setup page one of D1 Half D1 or CIF can be selected as a AXIS resolution But certain AXIS camera models do not support D1 Half D1 and CIF resolutions In this case please use the following chart to determine Video Mode and Video Resolution For instance if you want to use CIF video resolution for an AXIS camera check if 352x240 320x240 or 352x288 is listed under the resolution in the chart If one of the sizes is available that means that you can use the resolution If a selected resolution is not applicable the product searches for a supported resolution in the order of D1 Half D1 and CIF and then changes the resolution automatically AXIS cameras that do not support any of the listed resolutions below cannot be used in connection with the NVR 704x480 4CIF 640x480 704x576 Half D1 704x240 2CIF 704x288 CIF 352x240 320x240 352x288 Ol m automatically searches the current network to find cameras to connect IP 192 168 753 192 168 71 57 192 168 71 53 192 168 742 192 168 740 192 168 730 192 168 730 192 168 732 192 168 7 3 192 168 726 1921667 235 192 168 7230 192 168 723 192 168 7222 192 168 722 192 168 7227 192 188 7225 192 168 7224 192 168 7220 192 168 7 2 192 168 720 192 168 7172 192 166 7730 192 166 7125 192 166 7124 192 168 7122 192 165 7727 192 166 7119 192 166 7118 192 166 7175 192 168 7113
79. identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a wri
80. if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by 107 electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with
81. ing up the files To select multiple files use Ctrl click or Shift click Clicking the DEES button selects all search results The maximum searchable period is 7 days If more than 500 event video files are recorded within a selected search period data saved after a day for which 500 or more accumulated video files are recorded is not searched For example if video files are searched from _ 10 to 15 and 800 accumulated video files are saved by 11 the program will ae not search data saved after 11 and will display search results only up to the aiii 800 file Note Events that occurred during Normal Record mode cannot be searched Do not click a mouse button or press any key during the backup process If the cursor position on the window is changed by your selecting other item or moving to other tab backup will not be performed properly Backup will be stopped if you enter a different item during the process 74 Index CH Start Time End Time Download Status 1 2009 05 13 21 14 35 2009 05 13 21 14 50 Downloading 2009 05 13 21 14 49 1 1 1 2005 05 13 21 15 33 2009 05 13 21 15 39 waiting 2009 05 15 21 16 30 2005 05 13 21 16 37 waiting 2009 05 13 21 18 47 2005 05 13 21 18 54 waiting While a backup task is in progress the button is displayed To abort the backup Stop process click the button Video files that are downloaded prior to aborting the backup will be saved in the backup director
82. is License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all 105 For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consiste
83. isplays the system s functional HDD as one 500GB RAID In the RAID1 mode no data is lost even if one of the two HDDs of a RAID array is damaged Note 89 A Caution Selecting RAID5 configures 4 HDDs to 1 RAID array RAIDS uses 4 physical HDDs as 3 functional HDDs For instance configuring HDD1 2 3 and 4 while each one of them is equipped with a 500GB HDD to RAID5 displays the system s functional HDD as one 1 5TB RAID In RAIDS mode no data is lost even if one of the four HDDs is damaged To configure a RAID mode HDDs must be the same size It is highly recommended that you use the same brand and model HDDs to configure RAID RAID settings are available only for internal HDDs Building a RAID mode using 4 x 500GB HDDs takes approximately 3 hours for RAID1 and 4 hours for RAID5 It is recommended to use UPS while configuring RAID because reconfiguring RAID due to a power failure during the first try may take a while Changing the RAID settings to a new mode automatically deletes all data in the HDDs of the product and new video files are not saved until the new RAID mode is completely configured When the product is abnormally turned off i e by pulling the AC power adapter out and then turned on the product may reconfigure its RAID settings automatically to ensure the integrity of saved data While a new RAID mode is being configured existing data is not lost but new data will not be saved either If more t
84. ist changes from Connected to Not Connected In this case the product automatically connects to the NAS HDD if the problem is resolved The status of the HDD then reverts to Connected The NAS data saving speed is slower than internal and external HDDs this may cause video files to be saved improperly ZA New NAS settings are applied only if you click at the bottom of the i4 screen HDDs MUST not be removed from the system while the system is in operation To remove HDDs safely please refer to 5 4 Removing HDDs Caution 08 4 6 6 Network Setup You can configure network settings on this screen Connection Type IP Address Assigned IP subnet Mask Assigned IF ID Gateway Mac Address 00 00 00 00 00 00 Mac Address Password oa Connection Port Connection Type Connection Type 0 0 0 0 0 0 0 0 0 0 9 00 00 00 00 00 00 Mac Address EHE I Http Fort ATC Mode Disable EE Lise e Disable Enable Lise i Disable Enable Server Domain i IF Range 0 0 0 0 ID WWW SAmsungipolis co J 1 DNS Use RTSP e Disable ig Enable SMTP ServerName RTSP Port 554 fd Use Authentification RTP Por 4000 D o i Password Multicast Address 24 0 ad E Mail To You can use either PPPoE Static IP or DHCP as a connection method for the network ports on the rear panel If you are not sure which method to use please ask your network administrator for assistance If the pr
85. ital video Setting up this recorder is easy you may use the buttons on the front of the product or connect to the product remotely via a network With proven performance and reliability the NVR is a self sufficient video recorder as well as ideal for digital video feed storage for monitoring systems of banks apartment buildings and public offices that require a high security level Since video is stored on hard disk there is no loss in picture quality due to repeated playback from the storage media Further since all video data is stored as digital files it is easily and quickly searchable This high resolution video recorder features a large storage capacity and also comes with a wide variety of user friendly features such as Simultaneous recording and playback capabilities motion detection PTZ pan tilt zoom control password real time voice data recording convenient access permissions setup using Key Lock and maintenance of up to 10 000 event lists and log files 1 1 Safety Precautions A Warning The following information or instruction is vital for user safety please read it thoroughly to avoid serious injury or death Installing the Product v Please check the power outlet voltage AC 100V 240V before you connect the power to the outlet v Make sure that the product is switched off before you install it Vv To avoid the risk of electric shock and or fire do not install the product in a damp area
86. k checking process or a new RAID mode is being configured the product cannot be used to format another new HDD the button is not displayed even if you select an HDD in the list Selecting a NAS and then clicking does not format the entire NAS it only deletes the entire video data of a selected NAS ih WHI VE A New Repeated Recording setting is applied only if you click at the top of the screen Note Auto Deletion In In Auto Deletion you can select and specify necessary items of Auto Deletion as well as the storage period Set the Mode item to On and specify the storage period in the Duration item Then press in the right side This will automatically delete older data in the HDD than the specified period The storage period can be specified by the day ranging from at least one day to a max of 365 days o4 aes If you activate Auto Deletion for the first time HDD data older than specified will PANO be deleted automatically and it may take a while until the Auto Deletion mode Note gets started RAID Mode In the RAID Mode menu you can change the system RAID settings To change the settings select Normal RAID1 or RAID5 and then click on the right Normal is the non RAID mode Upon applying new RAID settings the system automatically reboots itself you will be disconnected from Web Viewer The system requires approximately 2 minutes to reboot and establish a network connection While the new RAID settings are bein
87. k the button to display the circular button shown on the right Click a direction on the circular button to pan the camera in that direction adjusts the zoom and focus of a selected camera Click the button to display the circular button shown on the right Click and l to zoom in and out click E and amp to adjust the focus Click the button next to the circular button to play the audio feed from the selected channel The effect of this button is identical to the Audio option in the right click context menu 34 You can adjust the PTZ speed with the slider knob at the bottom of the page A total of 6 different PTZ speed levels are available Click GEE to decrease the PTZ speed by one level and ili to increase it by one 1 is the slowest PTZ speed setting and 6 is the fastest PTZ speed ait ce I y iil Hi D a Te lid q The PTZ control and preset options are only compatible with PTZ enabled Nl cameras 4 4 4 OSD Control When clicking on a channel video the video screen is outlined in orange to indicate that it is selected To display the camera OSD of the selected channel click CJ on the left side of the screen IPOLIS sewo secunity Sout CJ Monitoring Q Playback al O Config E System ae TT Logout Help A Auto sequence We i gt Sequence Setting OUE _OSD Setting Initialize i E Ea Status Oi ae i Ve 3D eisa To control the OSD
88. ke a while if you change NTP client settings from Disable to Enable Updating the time settings of the product does not take effect immediately you must refresh the screen by opening the Time Setup page To use the NTP client option the NTP public servers and the Monitor Ethernet Port must be within the same network When the NTP Server option is activated the Source Ethernet Port acts as the NTP server New Current Time settings are applied only if you click E New Time Configuration and NTP settings are applied only if you click oo awy 65 4 7 System The following page appears when selecting at the top of the screen By clicking on one of the buttons on the left of the screen you can go to the page that corresponds to the function described on that button IPOLES itok Security Sotu 1 Monitoring Q Playback Config F System admin Logout Help Upgrade Log Main 0 9 0 090514 File Open Set Default Except Network HDD Time Log Set Default nas 66 4 7 1 Upgrade Displays the current firmware version of the system and enables resetting the settings as FAV Version Main 0 9 0 090514 show Detail a FAW Upgrade File pen Set Default Set Default Except Network HOD Time Log Set Default a Export Import Configuration Export Import F W Version At top of the screen is the current firmware version Click for more details as shown in the screenshot below
89. key Lock is locked Note oi 5 1 System On the default LCD screen press V to move to the screen shown below and press ENTER 1 System SET Sub menus will appear where you can use the V buttons to navigate 1 Firmware Version 2 Key Beep On Off 3 Relay off 4 System Update gt Factory Reset 6 Test HDD 7 System Power Off 2 Off Selecting 1 On and pressing Enter turns on the beep Selecting 2 Off and pressing Enter turns off the beepIn each case the following messages appear Key Beep is On Key Beep is Off TO a The beep sound automatically turns on after rebooting the system even if it is turned off Note 5 1 3 Relay Off Under System select 3 Relay Off and then press ENTER button The following message appears while Relay 1 2 outputs on the rear panel are removed Relays are off LAE For detailed instructions on the relay output setup please refer to 4 6 3 Event Note The beep sound followed by events occurred is turned off if you press any button on the panel 5 1 4 System Update EA To update the system a USB flash drive containing the update file must be N connected to the USB port on the rear panel Note The firmware update file must have a file name that starts with srn and a filename extension bin The firmware update file must be located in the root directory of the flash drive If more than one update file exists on the fl
90. l outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnecessary 3 Protecting Users Legal Rights From Anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures 4 Conveying Verbatim Copies You may convey verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any non permissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may char
91. ling the product please leave at least 15 cm of space between the cooling vent and the wall for proper heat dissipation Vv To prevent user injury and product damage please install the product on a level surface with no risk of the product falling v Avoid installation in an environment where the product will be exposed to heat or direct sunlight product deformation and or damage may result v When installing the closure take into consideration the operating temperature and humidity of the installation environment according to the product specifications see Appendix Using the Product v Avoid shock and vibration while operating or moving the item v Do not move the product while it is in operation do not expose the product to strong impact or throw the product v If you wish to add a hard disk to the product please contact your vendor adding a non recommended hard disk may cause the product to function abnormally v Arbitrarily adding a hard disk to the product will void your product warranty v This product is not an anti theft or fire prevention device the manufacturer is not responsible for any damage to property or personnel that may occur A Caution eco RoHS compliant Samsung Techwin recommends the installation of a UPS Uninterrupted Power Supply with all its recording products Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environmen
92. nd Connecting Product ccsecesssseeeseenseeseeenseesseeneeessoeees 18 3 1 1 Supplying Power and Operating the Product ccecccccseeeeeeeeeeeeeaeeeeeeneeeees 18 3 1 2 Configuring the Network cccccssscecceeseeeceeseeecceseeccsaseeessageeeceuseesssaneesssageees 18 Jho Menal ADD seasrs vet scca pia ata cal aned adel a a i dariad iene 19 STA Extena l PADD osis a atv cies Gla duadeal wh a eouniutine 22 S ISO EEE e EEN N E ENA E EE AE A T E A EA A E N 23 Su MOU REAY Swat E a E a a E Noahieanaadieaniuls 24 Doll a WO Berana a a E eae eden ee owas 25 3 2 Connecting to the Website nnannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nennu nnmnnn nnmnnn 26 I2 CONDE CUI Caplan a a A eduamten auten 26 32 2 Adding aN IP Add ESSren aa ae a 26 3 2 3 Connecting and Changing Settings cccceecccecseeceecseeeeeeseeeeeeeeeeeeesaeeeeeseeeees 28 Chapter 4 ONG ratio i i esscccanscccsnctsceccsnivecsssecdacecescianaseustaecenannasnessaae 31 4 1 System Requirements cccccsecesseeseeeeseeseeeeeesseeeeeesseeeeeesseeeneenseeeseenseesnonsnees 31 4 2 Compatible Web Browsers cccssssececesesseeseeenneeeeoesseeeeeenseeeeeeseeseeesnees 31 AO NEO QUIN iian i a a 32 AA MONON O sisean a a a aai 33 4 4 1 Splitting Screen and Changing Channels ccccceeeececeeeeeeeeeeeeseeeeeeeneeeeeens 33 WAZ Nde o COMU ON nino a co sevedantiaucal aa A Aa 34 AAO PTZ CONTO pias cain cocina di
93. nected Mode i OFF Duration im Mormal RAID RAIDS RAID Status NAS Port MEE Disable Enable Default Folder Password HDD O93 1427554 M16 Refresh Apply Free Size 1427554 MB HOO Format Apply Apply On top of the screen the types and statuses of internal HDDs external HDDs and or NAS devices currently connected to the system are listed Internal and external HDDs give their model record times total size total capacity and free size remaining capacity NAS devices give their user assigned names and current connection statuses RAID configured internal HDDs are displayed as RAID instead of Internal and their model names are replaced by the raid mode RAID1 MODE or RAID5 MODE While an HDD is being formatted an HDD is in the disk checking process and a new RAID mode is being configured Formatting Testing and Building are displayed instead of the device model names Set Repeat Recording to On and the system will automatically erase the oldest recorded video to make room for new video when no free space remains on the HDD To renew the list of connected HDDs click Refresh When you select an HDD appears click it to format the selected HDD While formatting is in progress the front LCD displays the following message Formatting HDD is in Progress HDD Format DONE While an HDD is being formatted an HDD is in the dis
94. nnot use the address for your computer s internal IP address at 3 2 3 Connecting and Changing Settings Type 192 168 1 100 in your Internet browser address bar then press Enter iP 0 Mi Network Security Solution Gi SAMSUNG TECHWIN The pages look well with the explore 6 0 above Web camera Solution by Samsung Techwin Co Ltd copyright c 2009 SAMSUNG TECHWIN Co Ltd In the login window enter admin as the User ID and 11111111 for the Password Click Login to connect to the product Tad MA Network Security Solutio TG Monitoring im gt om Q iE 8 t ysten admin E Logout Help Pause Capture Info lt gt PT Q ZF 28 When connecting to the product for the first time no video displays as no network or camera is set up Clicking as shown in the screenshot below Aadmin E Logout Help ss Status Record Setup Event Setup Camera Setup HDD Setup Network Setup Time Setup Total Information Total Live Input Size Obps Total Live Video Loss Rate 0 00 Total Live Audio Loss Rate 0 00 Total Record Input Size Obps Total Record Video Loss Rate 0 00 Total Record Audio Loss Rate 0 00 Total Configured BW size Okbps Description Disabled Ch Connected ch Recording Ch Connection Error aa Record Status Total Recordable Time OD 00H 00M 00S Current Recordable Time OD 00H 00M 00S se F W Version Main 0 9 0 090514 Show Detail User Backup ss F
95. normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable 123 It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute 7 You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work 8 You may not copy modify sublicense link with or distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or distribute
96. not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system SALES NETWORK SAMSUNG TECHWIN CO LTD samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 100 Challenger Rd Suite 700 Ridgefield Park NJ 07660 samsung House 1000 Hillswood Drive Hillswood Business Park Toll Free 1 877 213 1222 Direct 1 201 325 6920 Chertsey Surrey UNITED KINGDOM KT16 OPS Fax 1 201 373 0124 TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungcctvusa com www samsungtechwin com www samsungsecurity com www samsungipolis com PTO1 00001 7
97. nt application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you
98. o require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source 110 The Corresponding Source for a work in source code form is that same work 2 Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted materia
99. oduct is connected to a PPPoE type xDSL line choose PPPoE as the connection method and enter the access ID and password Choose the Static IP connection method if you wish to use a Static IP and enter the IP address subnet mask and gateway to use Choose DHCP if a DHCP server is connected to the network you want to connect to the DHCP server will automatically assign an IP address for you If you are using PPPoE or DHCP you will find the IP address currently a assigned to your product in Assigned IP you cannot set Assigned IP yourself e Changing the network connection method from PPPoE to DHCP or Static IP automatically reboots the system The 3 rear network ports Refer to 2 2 Back Panel and 3 1 2 Configuring the Network are the Monitor Ethernet Port Source Ethernet Port and Storage Ethernet Port The Monitor Ethernet Port connects the monitoring computer to the NVR via the web or the setup program 29 The Source Ethernet Port connects to the cameras The Storage Ethernet Port connects to NAS devices In relation to Monitor Ethernet Port you can set the connection port number and http port The http port is used to connect to the product via Web Viewer If you changed the default value 80 for HTTP Port then you must append your port number to the product s address when connecting to your product with Web Viewer For example if your IP address is 192 168 1 110 and HTTP Port is 8080 then http 192 168 1 11
100. ommunication is taking place properly 16 LINK ACT2 A blinking blue indicator means that a network cable is properly connected to the Source Ethernet Port and data communication is taking place properly LINK ACT3 A blinking blue indicator means that a network cable is properly connected to the Storage Ethernet Port and data communication is taking place properly 18 POWER A red indicator means that the product is powered on 19 Config Ethernet Used to connect the product to a computer for the system Port configuration 20 LCD Panel The panel displays the current status of the product it can also be used to change the system configuration with the adjacent buttons 21 ESC Button This button is used to change the system configuration Chapter 5 LCD Setup covers its use in detail 22 Direction Button This button is used to change the system configuration Chapter 5 Enter Button LCD Setup covers its use in detail N 11 2 2 Back Panel DO W SES ei put roa eaa ts SEMICH IN RELAY DUT No Function 1 AC IN Used to connect the product power cable 2 SMPS FAN This fan cools the power supply 3 DC FAN This fan cools the inside of the product 4 Monitor Ethernet Port A network port that allows the product to connect to a PC to run Web Viewer 5 USB Port Used to upgrade the firmware version of the product 6 Power Button Turns on or off the product T Source Ethernet Port A network port t
101. on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer or modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion 1 Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any non source form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of inte
102. one of them is equipped with a 500GB HDD to RAID5 displays the system s functional HDD as one 1 5TB RAID In RAIDS mode no data is lost even if one of the four HDD is damaged RAID1 requires at least 2 HDDs to be equipped next to each other HDD1 and HDD2 or HDD3 and HDD4 while RAID5 requires all 4 HDDs to be equipped To configure a RAID mode HDDs must be the same size It is highly 30 recommended that you use the same brand and model HDDs to configure RAID RAID settings are available only for internal HDDs Building RAID using 4 x 500GB HDDs takes approximately 3 hours for RAID1 and 4 hours for RAID5 An abnormal system shutdown due to such as disconnected power during RAID configuration will cost you a lot of time to complete the RAID configuration So it is recommended to use UPS for power supply Changing the RAID settings to a new mode automatically deletes all data in the HDDs of the product and new video files are not saved until the new RAID mode is completely configured When the product is turned off abnormally i e by pulling the AC power adapter out and then turned on the product may reconfigure its RAID settings automatically to ensure the integrity of saved data While a new RAID mode is being configured existing data is not lost but new data A will not be saved either If more than two RAID configured HDDs are broken or removed from the Caution product the RAID configuration will malfunction
103. onnected ch Recording ch Connection Error ss Record Status Total Recordable Time ODWH2IM2IS 42 4 6 1 Status Displays the current status of each channel along with the free storage space of the product at the bottom Channel 02 SNC 570 192 168 7271 Password Fail Tota Infor mation Total Live Input Size 3848 7kbps Total Live Video Loss Rate 0 00 Total Live Audio Loss Rate 0 00 Total Record Input Size 38593kbps Total Record Video Loss Rate 0 00 Total Record Audio Loss Rate 0 00 Total Configured BW size 55296kbps Description ch Connected a Recording ch Connection Error ae Record Status Total Recordable Time OC 10H 27M 215 Current Recordable Time ites i Repeat Recording The Status Page lets you check the status of all channels in one screen Dark gray indicates an unused channel Light gray indicates a channel that is connected to a camera but is not in recording mode Blue indicates a channel that is in recording mode Orange indicates a channel that is experiencing a connection problem with its camera Details will be provided in the right The commonly displayed items include the current bit rate for each of Live and Record Video Loss and Audio Loss On the bottom the specified bandwidth will be added for your reference In the meantime the channel information will be displayed in the upper area while the statistics for the entire channels will be li
104. ons for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 15 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION t29 16 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES ORA FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply Thes
105. orded by Event Record in the Playback screen For instructions on setting up events and Input Group please refer to 4 6 3 Event Setup You can select different frame rates for each recording mode Normal Record Event Record Active when an event occurs Event Record Inactive while no event is detected For Normal Record and Event Record Active All frames frames and 2 frames are available For Event Record Inactive All frames frames 2 frames and No Record are available Choose All frames to store all video feeds from the camera while I frame stores only the 1 frame of the video feed per 1second Choosing 2 frames stores only the frame of the video feed per 2 seconds No Record does not record any video HHH WH i mi Pr PA New settings are applied only if you click oo awy Note 4 6 3 Event Setup From this screen you can configure Event related settings 45 Local Sensor Type Sensori Normal Open Sensor Normal Open Apply Action Group TE Modify E Remove i i E Modify i Remove do i Modify i Remove Local Sensor Type Local Sensor Type let you select the operation type for Sensor 1 and 2 between Normal Open and Normal Close Normal Open activates a sensor input when the contact type is short or the dynamic type is at the Low level Normal Close activates a sensor input when the contact type is open or the active type is high impedance open collector For more
106. orresponding Source as a System Library need not be included in conveying the object code work A User Product is either 1 a consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of the status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made If you convey an object code work under this section in or with or specifically for use in
107. ose remains meaningful For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the application Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Library ipl In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License
108. ou may not impose any further restrictions on the exercise of the rights granted or affirmed under this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it 11 Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of
109. p corresponding to the _ Input or Output Group Note 4 6 4 Camera Setup Chi chis ve CHO CHO1 lem ChO2 CHO2 ye ChO3 CHOS fem ChO4 CHO4 ye ChO5 CHOS ye ChO6 CHOG ha ChO7 CHOF ys ChOB CHOE ye ChO9 CHOS va Ch10 CH10 fem Chii CH11 fem Chi2 CH12 lea Ch13 CH13 fem Chit CH14 bejm Chi5 CH15 tee Chi6 CH16 SS Chi Ch32 Ch33 Ch48 Ch493 che4 Camera Search p Disable Enable Channel Name Model Connection Type IP Port ID Password Picture Type Video Mode ATC Mode Video Quality Video Resolution Video Framerate Select a channel in the left list you can view or modify its camera settings Active channels are displayed with a while inactive ones are with e Lees Selecting Enable activates a channel Channel Name Name a channel Channel Name is displayed on the top of the Monitoring and Playback screens Model Select the model number for a camera In addition to network cameras you can choose network video servers such as the SNS 100 SNS 400 etc Connection Type Select the connection type for a camera between Static IP and DDNS To use Static IP enter the IP address and connection port for a camera To use DDNS enter the DDNS server address and user ID ID Password Enter the login ID and password for a camera Picture Type Select an image save method between MPEG and JPEG formats 49 Video Quality Video R
110. pies You are not required to accept this License in order to receive or run a copy of the Program Ancillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so 10 Automatic Licensing of Downstream Recipients Each time you convey a covered work the recipient automatically receives a license from the Original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction transferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the igs Corresponding Source of the work from the predecessor in interest if the predecessor has it or can get it with reasonable efforts Y
111. r Acree inn em All frames Event Record Config Input Group Active Pre Recording Time ssec x Inactive 7 Fost Recording Time sec x _ SS 12 3 4 65 6 Ff 8 10 R 14 175 16 Tf 18 19 2 21 2 23 24 TT ttt BENNEN TO 7TTtteee ooo 44 Select a channel on the left side of the screen to choose its video recording method To choose time and a method of saving a video on each day select one of Normal Record EventRecord or bial tl and then drag the cursor in the bottom timetable to make a selection Different colored blocks of hours and days indicate different record modes Upon selecting the name of the record mode buttons are Bolded and Italicized to ee 2 M2 Record Normal Record mode records video always at a set frame rate while Event Record changes its frame rate for events You can select an Event Input Group or Own Event to activate Event Record mode When selecting an Input Group Event Record is activated for events corresponding to the Input Group When selecting Own Event Event Record is activated for all events occurring in the selected channel For Event Record Pre Recording Time defines the amount of time before the Event and Post Recording Time defines the amount of time that elapses after the Event to employ a special frame rate for storing video You can have up to 5 seconds of Pre Recording Time and up to 60 seconds of Post Recording Time You can search videos rec
112. r those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threatened constantly by software patents States should not allow patents to restrict development and use of software on general purpose computers but in those that do we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary To prevent this the GPL assures that patents cannot be used to render the program non free The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU General Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you Licensees and recipients may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work 109 A covered work means either the unmodified Program or a work based
113. rder agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program 13 Use with the GNU Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such 14 Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing ver
114. ress in the Network Setup screen so your product can notify you with an e mail when a defined Event occurs Please Refer to 4 6 3 Event Setup Enter an outgoing e mail server address under SMTP Server Name and an e mail address under E Mail To If your mail server requires authentication for sending e mail check User Authentication Enter your login ID and password for your mail server in ID and Password aA To use the E Mail option the Monitor Ethernet Port must be connected to a mail server v N New network settings are applied only if you click Aon Note 63 4 6 7 Time Setup This page deals with the system s time settings 03 06 2009 v 20 31 42 Set Time Date Format mmddyy zl Time Format lan UseDST Disable Enabe Start End Use Client Disable Enable Use Server Disable Enable Public Server1 Address pool ntp org Public Server2 Address asia pool ntp org atl femelle eel t nor th america pool ntp org mat emel 10 een CEER CLITODe pool ntp org You set the current time for the product under Current Time Current date is located above current time is below Select an item by clicking on it and use either the up down arrow keys or the number keys on your keyboard to change its value The 5 up down button can be used instead of the keyboard to change the current time To display a calendar click z in the date window The current date of the product is highlighted in blu
115. rfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or general purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed t
116. rly A blue indicator means that Internal HDD3 is installed and functioning normally A red indicator means that Internal HDD3 is not functioning properly A blue indicator means that Internal HDD4 is installed and functioning normally A red indicator means that Internal HDD4 is not functioning properly A blue indicator means that an external HDD is connected to the rear eSATA Port1 and functioning normally A red indicator means that External HDD1 is not functioning properly A blue indicator means that an external HDD is connected to the rear eSATA Port2 and functioning normally A red indicator means that External HDD2 is not functioning properly A blue indicator means that an external HDD is connected to the rear eSATA Port3 and functioning normally A red indicator means that External HDD3 is not functioning properly 10 10 EXTERNAL A blue indicator means that an external HDD is connected to the HDD4 rear eSATA Port4 and functioning normally A red indicator means that External HDD4 is not functioning properly 11 REC A red indicator means that the product is in recording mode 12 ALARM A blue indicator means that an event in Input Group has occurred 13 ERROR A red indicator means that the product is not functioning properly 14 RAID A blue indicator means that the product is running in RAID mode 15 LINK ACT 1 A blinking blue indicator means that a network cable is properly connected to the Monitor Ethernet Port and data c
117. s that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it 102 For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow
118. sion number If the Program specifies that a certain numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation 117 If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s public statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version 15 Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING
119. sted in the bottom When selecting a channel that is Connected or Recording the bitrate as well as video and audio losses for the channel are displayed For a channel in Connection Error state it displays the error information a Al Live indicates a live video feed Record indicates a live video feed that is An being recorded and saved in the product s HDD Note Record uses data from the last 8 seconds to calculate statistics there may be a slight discrepancy between the bitrates of Live and Record even when all the frames coming from the camera are being stored normally 43 Record Status displays remaining recordable hours under the current recording settings Total Recordable Time displays a total recordable time of all connected data storage units Current Recordable Time displays remaining recordable hours based on the current free storage space of the product If the HDD becomes full during the Repeat Recording mode the Current Recordable Time menu displays Repeat Recording Please Refer to A If you see a message of Setup fail bitrate exceeds or Setup fail framerate exceeds see the figure below you cannot add a camera any more Caution a SAN Message SAN Message Setup fail bitrate exceeds Setup fail framerate exceeds Close Close 4 6 5 HDD Setup 4 6 2 Record Setup Select a channel on the left of the screen to choose its video recording method Channel Model IP Pt
120. t and is taking a number of steps to provide customers with more environmentally friendly products The Eco mark represents Samsung Techwin s will to create environmentally friendly products and indicates that the product satisfies the EU RoHS Directive 1 2 Product Contents The contents of this product are as shown below VAS 2 D Rack Mount and Fixture Power Cord Key Screws HDD Fixture Screws User s Manual Quick Reference Guide NET I Viewer User s Manual CD Cross Cable HDD Tray 4EA Chapter 2 2 1 Front Panel Part Names D WOOOO MOHDaw INA2DADAHAHAGAY 7 1 Key Lock 2 SATA Bracket 3 Internal HDD1 4 Internal HDD2 Internal HDD3 6 Internal HDD4 7 EXTERNAL HDD1 8 EXTERNAL HDD2 9 EXTERNAL HDD3 O1 Function Turning the key completely engages the lock so the buttons on the front panel cannot be accessed and the HDD bay door cannot be opened Mounts hard disks for storing recorded video Up to four hard disks can be mounted Mounted HDDs are referred to as Internal HDD upper left Internal HDD2 upper right Internal HDD3 lower left and Internal HDD4 lower right A blue indicator means that Internal HDD1 is installed and functioning normally A red indicator means that Internal HDD1 is not functioning properly A blue indicator means that Internal HDD2 is installed and functioning normally A red indicator means that Internal HDD2 is not functioning prope
121. ted Self installation by the user may result in fire electrocution and or product malfunctions Please contact your local dealer for assistance with the installation of the product The contents of this manual may change in order to accommodate upgrades in firmware and or software Also the specifications and or design of this product may change without prior notice for product improvement Table of Contents PEC AG Cs caigisses cows te sane sect A EE 1 Product Warranty and Limited Liability ce ecceceeeecseeeeeeeeeeeeeeeeeeeeeseeeeeseeeeeseneeesees 1 Table of Contents sicacexs caneccassciceasescccccsee i demazeecsaeseecssenesscstnedsceeceosesseenes 3 Chapter Tz OV rVICW siocair aar 6 Tele Safety PRECAUTIONS cscop a E EiS 6 L2 Product COMENS sosi a E 9 Chapter 2 Part N mM S wiccsaccssctagccsadsssantincanseevcdecasnceistacicdeneiiciiveed 10 Bos PON Fem Clicseces st savacas peeenanct tana 2G awd eceirect a 10 2 2 BACK Paneli a a 12 2 3 Default SettiNgS cessscorrecetectctecvcua dtu daa lacus teesee aaa bodes Sodesbeesbualaten 13 Za Montonno AG Cs vastaes sate ca sentaseudhsscustceaeeduresuntactwissncovasevasstuds the a ones 13 TAG OAM PIAVE E 0 on nPe er ote See mene a eeet er ere metre gt eer Pee Re emer werent eee 13 ZOO eo CONIO PAGS a a diene tau ete auiuedenuate A 14 ZA PON SUC IM IO i e E A A NAAR 17 Chapter 3 Installation vsscesisesnssiees scctaicenesncedacdennctenaanetssusatassaswennants 18 3 1 Installing a
122. the page to control the video feed in that channel n Button Pauses or un pauses the video feed in the selected channel a Button Captures a screenshot of the current screen that you can save as a JPG picture file Button displays the name and current time for a channel on the video screen 7 5 Button Activates or disables the Deinterlace option on the video for a channel Place the cursor over the image and right click it to display the audio context menu Audio This works the same as clicking the button on the left Audio side of the screen Audio playback is from the currently selected Freset channel An icon appears to indicate which channel the audio feed is from you can also click to adjust the volume Preset Displays on a channel video screen Clicking lets you to select a preset A Preset is a pre selected angle and zoom operation for a PTZ camera Selecting a preset reverts the camera to the previous angle and zoom settings The NVR only supports loading existing presets To create new presets you must manually set them up in your PTZ cameras 4 4 3 PTZ Control Click on a channel displayed on screen an orange border appears around that channel to indicate that the channel has been selected With a channel selected you can use the button on the left side of the page to control the PTZ pan tilt Zoom of the camera for the selected channel changes the direction that the camera faces Clic
123. thernet Port is updated to use DHCP To move back to the previous phase press ESC To cancel the new settings and move back to the main screen hold down ESC for 2 seconds or longer Client Mode Setup DONE 84 PPPoE Setup Press and V to select 3 Use PPPoE and then press Enter Press the V buttons to select characters a z and spaces press the lt gt buttons to move to the next character Once you have finished entering the ID to use press Enter Password i Repeat the steps to enter a password and then press Enter Confirm PPPoE Setup Yes Enter No Esc Pressing ENTER moves to the next screen as the new PPPoE settings of Monitor Ethernet Port are being saved To move back to the previous phase press ESC To cancel the new settings and move back to the main screen hold down ESC for 2 seconds or longer PPPoE Setup DONE aiI Ill i AVL Wa AN Changing the network connection method from PPPoE to DHCP or Static IP Note automatically reboots the system DDNS Setup Press and V to select 4 Use DDNS and then press Enter Server Domain www samsungi polis co The default DDNS server is www samsungipolis com To use a DDNS server other than iPOLIS use and V to select from alphanumeric characters a z and 0 9 space and period use lt and gt to move between characters and edit the default DDNS address Press Enter when you ve finished entering the DDNS server addr
124. tialized the system reverts to the factory default settings To move back to a previous phase press ESC To cancel the initialization and move back to the main screen hold down ESC for 2 seconds or longer Factory reset is in Progress System will reboot after 5 seconds 80 Rebooting system is in Progress For more information about the default settings value please refer to 2 3 Default Settings The Factory Reset does not reset the RAID settings of the system or delete data saved in the HDDs Note 5 1 6 HDD Check HDD to examine Internal HDD 1 HDD to examine RAID PARTITION 1 Selecting an HDD displays a message asking if you really want to perform disk checking for the selected HDD Record on this HDD will be stopped Are you sure Yes Enter No Esc When pressing ENTER the following message appears as the disk checking process is initiated Once the process is complete the screen displays the check results Executing Please Wait Examining Int HDD 1 is in Progress Examining Int HDD 1 DONE HDD test result 0 bad block The check results stay on the screen until you click a button When selecting an HDD that is not available or connected the following message appears Sl Internal HDD 1 is empty RAID PARTITION 1 Does not exist Check HDD to Examine Please Try Again ax While an HDD is being checked new data is not saved in the HD
125. to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions b Use a suitable shared library mechanism for linking with the Library A suitable mechanism is one that 1 uses at run time a copy of the library already present on the user s computer system rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with c Accompany the work with a written offer valid for at least three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution d If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place e Verify that the user has already received a copy of these materials or that you have already sent this user a copy For an executable the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it However as a special exception the materials to be distributed need not include anything that is
126. tribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee _ You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License d If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purp
127. trol Panel gt Network Connections gt Local Area Connection gt Properties Local Area Connection 2 Properties General Authentication Advanced Connect using BS Intel R 825660 Gigabit Network Co Configure This connection uses the following tems E Client for Microsoft Metwork s m File and Printer Sharing for Microsoft Metwork s m QoS Packet Scheduler Internet Protocol TCP IF Description Transmission Control Protocollnternet Protocol The defautt Wide area network protocol that provides communication across diverse interconnected networks Show icon in notification area when connected Motif me when this connection has limited orno connectivity Select Internet Protocol TCP IP Click the Properties button then in the Internet Protocol TCP IP Settings dialog click the Advanced button to open the Advanced TCP IP Settings 20 dialog If the Obtain an IP address automatically option is checked under the Internet Protocol TCP IP Properties window please click the Use the following IP address radio button option before proceeding Advanced TCP IP Settings IP Settings ONS WINS Options IF addresses IF address Subnet mask 123 123 123 123 255 255 255 0 255 255 255 0 Default gateways Gateway Metric 123 123 123 0 Aukbomatic Automatic metric Click Add under IP addresses then enter 192 168 1 xxx The NVR uses 192 168 1 100 as the IP address you ca
128. ts conditions Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to require their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms _a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or _b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or _C Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways
129. tten offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or 104 c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as
130. ty does not extend to any accident neglect alteration or misuse of the product Furthermore this warranty does not cover any components or parts that are not supplied by the manufacturer of this product The product warranty period is for three years from the purchase date However the warranty does not cover any of the following problems and a nominal service fee will be charged if Product has been improperly used or handled by user Product has been disassembled and or altered by user Product has been damaged by connecting a power supply with improper specifications Product has been damaged due to an Act of God fire flood tsunami natural disaster etc To replace expendable components HDD Fan etc The warranty for the HDD and Fan is valid for one year from the purchase date This warranty covers only the product supplied with the warranty After the warranty period three years has expired a service fee will be charged for any inspection and or repair for the product During the warranty period a service fee will be charged for repair and or inspection for the product for any problems that are not covered by the warranty This product is not an anti theft or fire prevention device the manufacturer is not responsible for any damage to property or personnel that may occur during its use This product must be installed by skilled and experienced personnel self installation by the user is prohibi
131. u from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances 124 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License
132. u modify it For example if you distribute copies of the library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can get the source code If you link other code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright the library and 2 we offer you this license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is no warranty for the free library Also if the library is modified by someone else and passed on the recipients should know that what they have is not the original version so that the original author s reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant threat to the existence of any free program We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license Most GNU software including some librari
133. ung eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA Ihash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tjh cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographi
134. uropean Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are
135. ustrates an example of a dry contact sensor being connected to the product Zo si1 _ nA For detailed instructions on connecting sensors please refer to 4 6 3 Event Setup 3 1 6 Relays The following are specifications and operating conditions for alarm output Number of Input Circuits 2 Relays Spec Output Types Dry Contact Connection Type Attach stripped wire connections to the terminal block Power When connecting the relay outputs first determine the attributes of the device to be connected Normal Open or Normal Close then connect the device by referring to the diagram below RELAY OUT Warning Light SENSOR IN FE RELAY 1 RELAY 1 2 Normal Close O Common o o O o oo Normal Open 24 For detailed instructions on connecting the relay output please refer to 4 6 3 Event Setup 3 1 7 USB The USB ports on the rear panel are used to upgrade the product s firmware with the buttons on the front panel Please refer to 5 1 4 System Update Zo 3 2 Connecting to the Website 3 2 1 Connecting Cable Press PUSH z on the front panel to open the Locking Door then connect a PC to the Front Panel Network Port with the supplied crossover cable as shown in the illustration below When using a hub to connect the product to a computer you may use a normal LAN cable instead of a cross over cable 3 2 2 Adding an IP Address In your computer click Start gt Con
136. y Change To change the download folder click the button Backing up video files automatically creates a sub folder under the designated download folder The sub folder is named after the product IP address e g SRN 6450 Backup_192 168 1 100 and contains the backup video files Backup video files are playable with SLIM Player To download SLiM Player click the Download button at the bottom of the page A The buttons and functions of SLIM Player are as listed below AF 15 e N 3 G iD 13 14 Note a WEE pr d st a Cine te Ee s LJ A Oe 12 35 58 1 509 f O 71 12 55 1 59 oO a8 08 71 12 55 51 1 5 ae 4 Hb i oO 9 08 21 12 56 51 12 55 09 F O G21 12 55 51 12 56 09 ofc 5 DGA in i oO af Ae 2 6 8 2 5 5 fa oO a Gare es ise es J 19 Button Function 1 Use this button to open a folder that contains backup video files Available video files are listed in the order of time or channels 2 Select or deselect all files 3 Select one or more files 4 Deselect one or more files 5 Play selected files one by one 6 Stop playing and deselect files on the play list 7 Display information of saved channels 8 Display the running time of a video file that is being played 9 Adjust the play speed of the player 1x 2x 4x and 8x 10 Play Options Play options Skip back a frame Play backward Pause Play forward o Skip forward a frame 11 ScreenSize Adjust the scr
137. your product 6 You also can enter http Wwww samsungipolis com ID in your Internet browser s address bar to connect to your product ID is the domain you chose when you registered your product 60 Source Ethernet Port can act as a DHCP server to assign an IP address to a connected camera Enter two IP addresses the first and last addresses of an IP range to limit the range of dynamic IPs This DHCP Server option is especially useful when you want to open only the NVR to an external network and keep the connected cameras within the internal network AA To use the DHCP Server the connection method for Source Ethernet Port must ZN be set to Static IP Note E The front network port Config Ethernet Port is fixed as IP 192 168 1 100 eS N HTTP Port 80 Connection Port 4000 you cannot change this setting Note When connecting to the system via the Monitor Ethernet Port instead of the Config Ethernet Port changing the settings of the Monitor Ethernet Port may terminate the connection If this happens you must use the new address to connect to the product If you change the information of DHCP server it may take a max of 5 minutes to apply the changes to the system Caution All ports use the same DNS server you can have up to two DNS servers DNS1 is used as the default and DNS2 is used when DNS1 is unavailable Using RTP RTSP lets you watch the video of the SRN 6450 in the monitoring system without using Web

Samsung SRN-3250

Contents

Download Pdf Manuals

Related Search

Related Contents