Premier P4263FP flat panel wall mount
Contents
1. 17 De e E T A E adel E E T E E A E 17 Weight Limit THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF NETAN A PARE Weight 1 F 5 bs THE FLAT PANEL IF NOT THE WALL STRUCTURE MUST BE REINFORCED Warning Statements PRIOR TO THE INSTALLATION OF THIS PRODUCT THE INSTALLATION INSTRUCTIONS MUST BE READ AND COMPLETELY UNDERSTOOD KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED AS OUTLINED STOP IN THESE INSTALLATION INSTRUCTIONS FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE SERIOUS PERSONAL INJURY OR EVEN DEATH SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT USE STOP PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS AND IS NOT RESPONSIBLE FOR ANY DAMAGES CLAIMS DEMANDS SUITS ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM ARISING OUT OF OR INANY MANNER RELATING TO ANY SUCH USE ATTACHMENTS OR MODIFICATIONS At least two qualified people should perform the assembly procedure Personal injury and or property damage can result from dropping or mishandling the flat panel If mo2. NORTH AMERICA EUROPE 3130 East Miraloma Avenue Unit 3 The Moorings Business Park eat E USA Channel Way Longford and Canada ET T ETTE Coventry CV6 6RH UK Prone 1 800308 900 Phone 44 0 24 7664 4105 Fax 1 800 832 4888 Other Locations Phone 001 714 632 7100 Fax 001 714 632 1044 Fax 44 0 24 7664 4165 Premier Mounts 2011 Installation Instructions Visit the Premier Mounts website at http www premiermounts com Page 17
3. a 4 drill bit and power drill A Only use a 4 drill bit when drilling the pilot holes Place the wall plate against the wall and align it with the pilot hole Insert one 1 5 4 x 3 lag bolt and one 1 5h washer into the upper right mounting hole and tighten using a socket wrench and 7 socket A Do not overtighten the lag bolt Level the wall plate Use a pencil to mark the remaining three 3 mounting locations along the center of each wall stud Two people are recommended for this step one person to level the wall plate and another person to drill the pilot holes Drill a pilot hole in the center of each of the marks with a power drill and a 1 4 drill bit A Only use 4 drill bit when drilling the pilot holes Installation Instructions Visit the Premier Mounts website at http www premiermounts com Page 7 b a cA P4263FP Installing the Wall Plate cont d Insert one 1 54 x 3 lag bolt and one 1 h washer into each pilot hole Tighten all lag bolts using a socket wrench and 14 socket Do not overtighten the lag bolts when attaching the mount to the wall Improper installation may result in personal injury or property damage Proceed to the Installing the Mounting Bracket section Concrete Installation The supplied 5 6 concrete wedge anchors must be used for concrete installation You will need a 46 concrete drill bit which
4. a iaee riea ae retroe eerie odeti 11 Universal Washer Installation sesiccse scsssecsssseecnnessceescencetsn opens deeeeeauns cnn ccechusstneseehan aAA taad irae EAN aaia EKE Aiden estes 12 Universal Spacer Installation ccccccccccccccceceeceeeeeseseeeeeeeaeeeeeeeeeeeeeeeeeeeeeeseesescseeceeeseeeaeaeaeaeeeeeesaseseeeeeeeeeeseeeseseeeeeneeaeaes 12 Locking and Leveling Screw Installation esinen eeni e ei EE EEE eT EA e aE renea a aeaa 13 Lock lt Security Barrel Installation Optional resena aes see caveeeits cavea stags ac seseciecieescesaieieesvesciebosteascieiteesaseaiteacasteccieiieess 14 Attaching the Mounting Bracket to the Flat Panel ccccccceceececeeceeeeeeeeeceeeeeeeaeeaeeeeceeeaeceeeescaaeeeeeeeeceaeeeeseseaeeeeees 14 Attaching the Flat Panel to the Wall Plate 0cccccceccceeeeeeceeeeceeenaececeeeaaeeeeeeceaaeaeeeesaeeaaecesegesaaaeeeeeeseaaeaeeeeeneneaeeeeees 15 Mounting Bracket Adjustments saves scccctess es eoue EE EE NT EEr EA Eae E A A E EAN EA EAER LEENE 15 Leveling Sew AG USUM GIs asine eaae a a Aa Rea E E E E a EE Ei 15 LOCKING Screw AGJUSUMEM rrisnin neeaaea aaee eA Eea E aea E aE e Eae ETA NE E EEEE E aE Eiana EEEN 15 Utilizing the Securty Barelo ieira nipe eroa E Ee Edea deea eae E eE a ad oeae aaa DR e aaeeea aeS 16 Technical Specifications sinisisi eiiis ie eia i eieiei aidaa iniiae jeden Eae ei E ieina rE iS aiiai 16 KAE EENI a A E E eatin E A a aiden ve E E E A E E Aaa Geo aan naa ns
5. is available at your closest hardware store Concrete Wedge Anchors Example of 6 Concrete Drill Bit Not Included Two people are recommended for this step one person to level the wall plate and another person to mark the mounting locations Place the wall plate against the wall in the desired viewing location Level the wall plate Use a pencil and mark 2 upper and 2 lower mounting locations where you will be drilling holes for the concrete wedge anchors Each horizontal location cannot be closer than 12 apart Set the wall plate to one side in a safe location Use a power drill and 5 4 masonry drill bit to drill a hole at each of the marks Page 8 Visit the Premier Mounts website at http www premiermounts com Installation Instructions gt 4 P4263FP eZ Installing the Wall Plate cont d Insert a concrete wedge anchor into each hole If necessary lightly tap each concrete wedge anchor into place with a hammer Remove the nuts and washers from all four 4 concrete wedge anchors Replace the washers which you removed from the concrete wedge anchors with the ic washers shown in the parts list on Page 3 Place the wall plate against the wall over the threaded shafts of the concrete wedge anchors Attach the nuts and 4 washers to each of the concrete wedge anchors and tighten using a socket wrench and an M10 socket Do not overtighten the wedge anchor nuts Proceed to
6. of this mount 0000000000 0 5000000000000000 gt Cc Cop Determining the Mounting Surface If you will be installing your P4263FP mount to wood studs proceed to the Wood Stud Installation section If you will be installing your P4263FP mount to a concrete wall proceed to the Concrete Installation section If you will be installing your P4263FP mount to a steel frame proceed to the Steel Stud Installation section Wood Stud Installation You must secure the wall plate to two 2 wall studs with a minimum of four 4 lag bolts 2 lag bolts for each stud found Use a stud finder to determine the exact center of wall studs in the vicinity of the wall plate Use a pencil to mark the exact center of each of the wall studs Two people are recommended for this step one person to level the wall plate and another person to mark the wall stud location Place the wall plate against the wall in the desired viewing location Adjust the wall plate to align the mount slots in the wall plate with the center of the wall studs Level the wall plate Use a pencil to mark the upper right mounting location along the center of the wall stud Page 6 Visit the Premier Mounts website at http www premiermounts com Installation Instructions gt 4 P4263FP 24 Installing the Wall Plate cont d Drill a pilot hole in the center of the upper right mark using
7. on the back of your flat panel Secure each mounting bracket to your flat panel by inserting a minimum of two 2 screws per bracket A Do not overtighten the mounting hardware Proceed to the Attaching the Flat Panel to the Wall Plate section Page 14 Visit the Premier Mounts website at http www premiermounts com Installation Instructions gt 4 P4263FP 24 Installing the Mounting Bracket contd Attaching the Flat Panel to the Wall Plate A This section requires two people our flat panel until you are certain that top and bottom hooks of both mounting brackets are Do not foleaee y f securely seated on the upper and lower mounting rails of the wall panel Raise the flat panel past the top and bottom mounting rails on the wall panel Slide the flat panel down slowly keeping it close to the wall Engage the top and bottom mounting brackets to the rails of the wall plate Proceed to the Mounting Bracket Adjustments section If your flat panel is tilted too far to one side the leveling screws will allow you compensate for this tilt by simply adjusting the screws with a screwdriver Loosen both locking screws Adjust the tilt of your flat panel Tighten both locking screws M6 x 250mm Leveling Screw 1 per Bracket Caution It is possible to dislodge your flat panel while you level your flat panel Use extreme caution until you tighten the locking s
8. P4263FP Portrait Flat Mount for 42 to 63 Flat Panels INSTALLATION INSTRUCTIONS 2 PREMIER BA MOUNTS CREATING POSITIVE CUSTOMER EXPERIENCES 9531 210 011 01 E P4263FP Weight LIMIE oort a a A 2 Warning Statements diries iine erea n r aea E EEA AEN EEEN E EE EEA EE E E EAE E OAE Eaa OERS 2 installati n TOOMSs cy ke aa e e Eae Ea a A Ee a a aa e E EEEE ETE eE Ar a AEE aa aas ae E 3 Parts List psen este cease nus nnes na aap ansaan eNEAN EEEE A es AAEE EAEAN EEE EE CAAO ea shaogo ier Eee dah EAN EAE Ep ANRE EAA EEEa 3 Mounting HardWare ss set cansessesteeses atseee eneee eE E EE EA EE EE E EEA Ea SEOANE aR E EA R ENNES 4 FAWN OS 5 cas sete E E A AE E E T E E E E E E E A E E ceeeacaastenepeneees 5 Installing the Wall Plate eanes eneee eE eenaa anaes EE aee E EEES EA aa Ee EEEE EAE EEES NAA NE ENE EE EEE ER 6 VAT OGU CU OM E EEE E E E A E E E E A T A T 6 Determining the Mo nting Surfa Esseri aa tanstans aa a snaked eieaa aitaa aeaa aa Eaei eieaa Seodra 6 Wood Stud Installation aie aries r a Shc a e ee a aa e aaa E A NET 6 Concrete llnstalation ssec ae eni e n ase E A En aA Eate S Ea EAEE 8 Steel St d Installation ieia no iai anae enian Ean aaa EEAS AE AANE O Ea EEN EEE E EAE EEUE AES ENEE EERE 9 Installing the Mounting Bracket s2 4 asce0ds sees ih ene e ene OEE AEE E EAEE eE eT EEEE ESE EAEE NEE EEEE 11 Selecting the Mounting HardWare ic cccccscicccoscescesccestenedseced aea es iare aai a eae ar
9. at Customers Must Do for Limited Warranty Service If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to the address below within thirty 30 days Proof of purchase an original sales receipt from the original consumer purchaser must accompany all warranty claims Warranty claims must also include a description of the problem the purchaser s name address and telephone number General inquiries can be addressed to Premier Mounts Customer Service at 1 800 368 9700 Warranty claims will not be accepted over the phone or by fax Premier Mounts Attn Warranty Claim 3130 East Miraloma Ave Anaheim CA 92806 How State Law Applies THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE Premier Mounts intends to make this manual accurate and complete However Premier Mounts makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Premier Mounts makes no representation of warranty expressed or implied regarding the information contained herein Premier Mounts assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document Contact Us
10. crews Locking Screw Adjustment After you have finished leveling your flat panel be sure to tighten the two 2 M6 x 250mm locking screws A Do not overtighten the locking screws M6 x 250mm Locking Screw 1 per Bracket Installation Instructions Visit the Premier Mounts website at http www premiermounts com Page 15 b a pe P4263FP Utilizing the Security Barrel Your P4263FP Mount includes one 1 Security Barrel which can provide additional theft deterrence for your flat panel PCB CSL1 Security Cable _ Thread the cable through the hole on the security barrel Attach the PCB CSL1 locking mechansim and secure it using the supplied key Padlock Place the locking hook through the hole of the security barrel Snap lock and locking hook together PCB CSL1 Padlock Combination or Keyed Technical Specifications All measurements are in inches millimeters 56285 22 159 530 28 20 877 501 70 19 752 gt CT L 74214 70778 14260 29 218 27 866 5 614 Nn bem COC eooccceroooooooooocosodeoore Page 16 Visit the Premier Mounts website at http www premiermou
11. ead one 1 leveling screw into the top mounting hole on each of the mounting brackets Make sure the leveling screw is securely threaded into the mounting tab before proceeding i pavelig aaeh f orrectly Threade Do not thread the leveling screw any further once it is even with the mounting tab Threading the leveling screw any further will prevent you from safely attaching the flat panel to the wall plate Leveling Screw Threaded Too Far VE Locking Screw Installation You must install the locking screws before you attach the mounting bracket to the back of the flat panel The locking screws consists of two 2 M6 x 250mm screws Thread one 1 locking screw into the bottom mounting hole on each of the mounting brackets Make sure the locking screw is securely threaded into the mounting tab before proceeding Do not thread the locking screw any further once it is even with the mounting tab Threading the locking screw any further will prevent you from safely attaching the flat panel to the wall plate QBDOOQOOOOOOEOEOOLOBOEOEIOEOEE 3006 E SSO XN Locking Screw Correctly Threaded Proceed to the Lock It Security Barrel Installation Optional section Locking Screw Threaded Too Far Installation Instructions Visit the Premier Mounts website at http www premiermounts com Page 13 gt 4 24 P4263FP Lock It Security Barrel Installation Optional li Opti
12. inder Wood Stud Steel Stud 5 16 Concrete Drill Bit Hand Held Drill SS Tape Measure Hammer Protective Eyewear Socket Wrench Ya Socket M10 Socket Phillips Tip Screwdriver Optional tools for steel stud installations Optional tools for concrete installations Parts List Your Premier Mounts product is shipped with all proper installation hardware and components Make sure that none of these parts are missing and or damaged before beginning installation If there are parts missing and or damaged please stop the installation and contact Premier Mounts at 800 368 9700 P4263FP Universal Low Profile Flat Mount Assembly Components NY Mounting Brackets Wall Plate M6 x 250mm Screws Qty 2 5 16 Flat Washers Universal Spacers Security Barrel Qty 6 Qty 24 Qty 1 Pro Mounting Hardware M6 Steel Stud Anchors 5 46 Concrete Wedge Anchors 5 16 x 3 Lag Bolts Qty 6 Qty 6 Qty 6 Installation Instructions Visit the Premier Mounts website at http www premiermounts com Page 3 gt 4 24 P4263FP Parts List con d Page 4 M4 x 16mm Screw Qty 6 M4 x 25mm Screw Qty 6 M4 x 30mm Screw Qty 6 M5 x 16mm Screw Qty 6 M5 x 25mm Screw Qty 6 M5 x 30mm Screw Qty 6 M6 x 16mm Screw Qty 6 M6 x 25mm Screw Qty 6 M6 x 30mm Screw Qty 6 M6 x 45m
13. m Screw Qty 6 Mounting Hardware M8 x 16mm Screw Qty 6 M8 x 25mm Screw Qty 6 M8 x 30mm Screw Qty 6 M8 x 45mm Screw Qty 6 M8 x 70mm Screw Qty 4 Visit the Premier Mounts website at http www premiermounts com Installation Instructions gt 4 P4263FP Locking Safety Screws Prevents the flat panel from being removed or dislodged from the wall plate Installation Instructions Mounting Slots Allow for a variety of stud configurations and lateral shift adjustments when mounting your flat panel Visit the Premier Mounts website at http www premiermounts com Leveling Screws Allows for leveling adjustments of the flat panel after mounting Cable Electrical Cut Out A large cut out on the wall plate allows for easy cable access and power distribution installations Directional Mounting Arrow Directional Mounting Arrow lets you know which edge is up Low Profile Design Holds the flat panel less than 1 from the wall Universal Spacers Premier Mount s uniquely designed spacers that fit multiple screw sizes Page 5 b a Ca P4263FP Installing the Wall Plate Introduction itt Directional Mounting Arrow The Directional Mounting Arrow stamped into the top of the P4263FP wall mount indicates which edge is the top Mounting Safety Two people are recommended to for the installation
14. nts com Installation Instructions P4263FP A PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product The limited warranty is valid only for the original purchaser of the product What Premier Mounts Will Do At the sole option of Premier Mounts Premier Mounts will repair or replace any product or product part that is defective If Premier Mounts chooses to replace a defective product or part a replacement product or part will be shipped to you at no charge but you must pay any labor costs What is Not Covered Limitations PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS ADAPTERS DISPLAYS PROJECTORS OTHER PROPERTY OR PERSONAL INJURY RESULTING IN WHOLE OR IN PART FROM IMPROPER INSTALLATION MODIFICATION USE OR MISUSE OF ITS PRODUCTS PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS OR PARTS SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU Wh
15. onal security configurations include PCB CSL1 sold separateh Padlock Combination or Keyed commercially available Mounting Tab Please read the following directions to install the security barrel Remove the locking screw from the mounting bracket Place the locking screw into and through the security barrel see illustration below Re insert the locking screw and security barrel into the mounting bracket Tighten the locking screw and security barrel until seated in the mounting tab Do not thread the locking screw any further once it is even with the mounting tab see illustration to the right Threading the locking screw any further will prevent you from safely attaching the flat panel to the wall plate 1 Do not overtighten the locking screw Proceed to the Attaching the Mounting Bracket to the Flat Panel section Locking Screw Lock lt Security Attaching the Mounting Bracket to the Flat Panel This section presumes that you have read and understood these sections Selecting the Proper Mounting Hardware Universal Washer Installation Universal Spacer Installation Place your flat panel screen side down on a soft flat surface Identify the number and location of the thread inserts on the back of your flat panel Aligning the holes on each mounting bracket with the thread inserts
16. small straw or toothpick Mark the straw or toothpick 1 8 above the depth of the threaded insert as shown in Figure 1 gt Insert the small straw or toothpick into the remaining threaded inserts to compare and verify their depth using the straw or toothpick s 1 8 allowance mark Locate the correct diameter screw for the threaded insert Za If the screw you selected is longer than the 1 8 A allowance mark on the small straw or toothpick i as shown in Figure 2 and Figure 3 do not use Matrite gspih this screw The screw length must not bypass the mark Threaded Insert V Test each size of the screws provided Small Straw or Toothpick lt The correct screws should thread easily into the mounting point and not pull out when tension is Figure 2 applied Proceed to the Universal Washer Installation section Small Straw ance Small Straw or Toothpick or Toothpick Installation Instructions Visit the Premier Mounts website at http www premiermounts com Marking the 1 8 Allowance Depth Plus 1 8 Allowance Mark Page 11 b a A P4263FP Installing the Mounting Bracket contd Universal Washer Installation Premier Mounts Universal Washers are designed to accommodate the various M4 M5 M6 and M8 hole sizes required by flat panels Do not place excessive pressure on the back of the flat panel as this may damage your flat panel The Universal Washer must be installed bet
17. the Installing the Mounting Bracket section Steel Stud Installation The supplied M6 steel stud anchors must be used to install your Premier Mounts mount to steel studs Do not use lag bolts or wood screws Steel Stud Anchor Screw Steel Stud Anchor Sleeve NNN Identify the general location on the wall where you will be mounting your flat panel Use a stud finder to determine the exact center of each steel stud in the vicinity of the mounting location Use a pencil and mark the exact center of each steel stud Installation Instructions Visit the Premier Mounts website at http www premiermounts com Page 9 b a 24 P4263FP Installing the Wall Plate cont d Place the wall plate against the wall in the desired viewing location Adjust the wall plate to match the locations of the steel studs Level the wall plate Use a pencil and mark 2 upper and 2 lower locations where you will be drilling holes for the steel stud anchors Set the wall plate to one side in a safe location Use a power drill and 74 drill bit to drill a hole at each of the marks Insert a steel stud anchor into each hole If necessary lightly tap each steel stud anchor into place with a hammer stud anchor screw until the legs have completely A compressed against the back of the steel stud The steel stud anchor screw
18. unting to wall studs or ceiling studs make sure that the mounting screws are anchored into the center of the wall studs or ceiling studs Use of an edge to edge stud finder is recommended A It is recommended that a maximum of plaster board be used when mounting to wooden studs Be aware of the mounting environment If drilling and or cutting into the mounting surface always make sure that there are no electrical wires in wall Cutting or drilling into an electrical line may cause serious personal injury Make sure there are no water or natural gas lines inside the wall where the mount is to be located Cutting or drilling into a water or gas line may cause severe property damage or personal injury This product is intended for indoor use only Use of this product outdoors could lead to product failure and or serious personal injury Do not install near sources of high heat Do not install on a structure that is prone to vibration movement or chance of impact Contact Premier Mounts with any questions 800 368 9700 techsupport mounts com Page 2 Visit the Premier Mounts website at http www premiermounts com Installation Instructions gt A P4263FP eZ Installation Tools The following tools may be required dependent upon your particular installation These tools are not provided by Premier Mounts but you can purchase them at your local hardware store se A v4 Drill Bit for 7 16 Drill Bit for Electronic Stud F
19. ween the head of the mounting screw and the mounting bracket as shown Does your flat panel have Recessed mount points Uneven mount points Acurved back Any obstruction near the mount point If Yes you must install Universal Spacers Proceed to the Universal Spacer Installation section Mounting Screw If No skip to the Lock It Security Barrel Universal Washer Installation Optional section Mounting Bracket Universal Spacer Installation Premier Mounts Universal Spacers allow you to attach the mounting bracket to flat panels which have recessed or uneven mount points Each Universal Spacer adds to the distance between the mounting bracket and your flat panel The Universal Spacers must be stacked and oriented as shown The Universal Spacers must only be installed between the mounting bracket and your flat panel The Universal Spacers will fit M4 M5 M6 and M8 screw sizes Proceed to the Locking and Leveling Screw Installation section POCOBCOCEG Page 12 Visit the Premier Mounts website at http www premiermounts com Installation Instructions P4263FP 24 Installing the Mounting Bracket contd Locking and Leveling Screw Installation Leveling Screw Installation You must install the leveling screws before you attach the mounting bracket to the back of the flat panel The leveling screws consists of two 2 M6 x 250mm screws Thr
20. will feel tight when w oee CTY MMM eez p ESS A Use a Phillips screwdriver to tighten each steel you first begin to turn it until the legs begin to compress The steel stud anchor screw will then turn easier for several turns The steel stud anchor screw will again feel tight when the legs have completely compressed against the back of the drywall Stop turning the steel stud anchor screw at that point A Do not overtighten the steel stud anchor screw Remove the steel stud anchor screws and set them aside Aa Steel stud anchors may come with small paper washers You may leave them on the screw or discard them These small paper washers do not replace standard h washers Page 10 Visit the Premier Mounts website at http www premiermounts com Installation Instructions Align the wall plate over the steel stud anchor sleeves Insert a steel stud anchor screw and a 4s washer into each steel stud anchor sleeve Use a Phillips screwdriver and tighten each steel stud anchor screw until it is just snug A Do not overtighten the steel stud anchor screws Do not use a power drill to tighten the steel stud anchor screws Proceed to the Installing the Mounting Bracket section Installing the Mounting Bracket Selecting the Mounting Hardware Insert a small straw or toothpick into the threaded inserts found on the back of the flat panel Use a pencil to mark the depth of the threaded insert on the
Download Pdf Manuals
Related Search