Philips SoundBar Home cinema speakers CSS2123
Contents
1. EN 3 English Care for your product Use only microfiber cloth to clean the product Care of the environment ae Your product is designed and manufactured with high quality materials and components which can be recycled and reused Es When this crossed out wheeled bin symbol is attached to a product tt means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health R Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health 4 Your SoundBar Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your SoundBar at www philips com welcome Main unit IPS D SURR indicator Lights up when surround mode is turned on Q Source indicators e COAXIAL Lights up when you switch to coaxial input sou2. 9 Troubleshooting WN Warning e Risk of electric shock Never remove the casing of the product To keep the warranty valid never try to repair the product yourself f you have problems using this product check the following points before you request service If you still have a problem get support at www philips com support Sound No sound from SoundBar speakers Connect the correct audio cable from your SoundBar to your TV or other devices On your SoundBar remote control press the Source buttons to select the correct audio input e Make sure that the SoundBar is not muted Press VOL to restore the sound see Adjust the volume on page 9 Distorted sound or echo e If you play audio from the TV through the SoundBar make sure that the TV is muted PHILIPS 2011 Koninklijke Philips Electronics N V All rights reserved Sgpam_1149 CSS2113 2115 2123_12_05_v3
3. MUTE ute or restore volume CN ei 1 Open the battery compartment 2 Insert one CR2025 battery with the polarity as indicated Close the battery compartment EN English 5 Connect your SoundBar This section helps you connect your SoundBar to a TV and other devices For information about the basic connections of your SoundBar and accessories see the quick start guide For a comprehensive interactive guide see www connectivityguide philips com Note For identification and supply ratings refer to the type plate at the back or bottom of the product Before you make or change any connections make sure that all devices are disconnected from the power outlet Subwoofer Follow the steps below to position and connect your subwoofer Position Place the subwoofer at least one meter three feet away from either to the left or right of your SoundBar and ten centimeter away from the wall For best results place your subwoofer as shown below LE me Connect Connect your subwoofer to your SoundBar as described in the quick start guide 6 EN Connectors Connect other devices to your SoundBar Side right MUSIC iLINK Audio input from an MP3 player Rear left BCE Cle DIGITALIN 4 SUBWOOFER Connect to the s
4. model and serial number of your product The model number and serial number are on the back or bottom of your product Note the numbers before you call Philips Model No Serial No 2 Notice This section contains the legal and trademark notices Compliance d This product is in compliance with the essential requirements and other relevant provisions of Directives 2006 95 EC Low Voltage 2004 108 EC EMC Mains fuse This information applies only to products with a UK mains plug This product is fitted with an approved molded plug If you replace the fuse use one with he ratings shown on the plug e a BS 1362 approval and he ASTA approval mark Contact your dealer if you are not sure about what type of fuse to use Caution To conform with the EMC directive 2004 108 EC do not detach the plug from the power cord Trademarks DI DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories 3 Important Read and understand all instructions before you use your SoundBar If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire e Hever expose the product and accessories to rain or water Never place liquid containers such as vases near the product If liquids are spilt on or into the product disconnect it from the power outlet
5. immediately Contact Philips Consumer Care to have the product checked before use 7 ever place the product and accessories near naked flames or other heat sources including direct sunlight ever insert objects into the ventilation slots or other openings on the product e Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Disconnect the product from the power outlet before lightning storms e When you disconnect the power cord always pull the plug never the cable Risk of short circuit or fire Before you connect the product to the power outlet ensure that the power voltage matches he value printed on the back or bottom of he product Never connect the product to the power outlet if the voltage is different Risk of injury or damage to the SoundBar For wall mountable products use only the supplied wall mount bracket Secure the wall mount to a wall that can support the combined weight of the product and the wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage ever place the product or any objects on power cords or on other electrical equipment f the product is transported in temperatures below 5 C unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet Pa
6. Register your product and get support at www philips com welcome CSS2123 EN User manual NL Gebruiksaanwijzing DA Brugervejledning NO Brukerhandbok DE Benutzerhandbuch PT Manual do utilizador EL Eyyeipidio xprnons SV Anv ndarhandbok ES Manual del usuario TR Kullan m k lavuzu FI K ytt opas FR Mode d emploi T Manuale utente PHILIPS Contents 7 Wall mount 10 1 Help and support 2 8 Product specifications FAQs 2 Contact Philips N 11 9 Troubleshooting 2 Notice Compliance Mains fuse NNN YN Trademarks 3 Important Safety Care for your product Care of the environment WWW w 4 Your SoundBar 4 Main unit 4 Remote control 5 5 Connect your SoundBar Subwoofer Connectors NN ON ON Connect audio from TV and other devices 6 Use your SoundBar Play audio from TV or other devices Adjust the volume Choose your sound MP3 player Apply factory settings CO OO 00 0 0 a gk EN 12 English 1 Help and support FAQs If you have a problem refer to the frequently asked questions FAQs for this SoundBar at www philips com support If you still need help contact Philips Consumer Care in your country Warning Do not attempt to repair your SoundBar yourself This may cause severe injury irreparable damage to your SoundBar or void your warranty Contact Philips If you contact Philips you will be asked for the
7. e connect the AUX connectors on your SoundBar to the audio connectors on the device AUX IN EN 7 English 6 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices Before you start e Make the necessary connections described in the quick start guide and the user manual e Switch the SoundBar to the correct source for other devices Play audio from TV or other devices Press the Source buttons to select the audio output of the connected device Adjust the volume peal i wt Hai H ILINK BASS VOL TREBLE To increase or decrease volume press VOL e The Source indicators on the front panel blink thrice when the volume is set to either minimum or maximum To mute sound press MUTE e The current Source indicator on the front panel blinks continuously To restore the sound press MUTE again or press VOL Choose your sound This section helps you choose the ideal sound for your video or music Change treble or bass Change the high frequency treble or low frequency bass settings of the SoundBar to suit your video or music BASS VOL TREBLE Press TREBLE or BASS to increase or decrease treble or bass e The Source indicators on the front panel blink thrice when the treble or bass is set to either minimum or maximum Surround sound mode Experience an immersi
8. r Depending on the type of wall make sure that you use screws of a suitable length and diameter to mount this SoundBar 3 3 5mm bn gt 25mm For information about how to wall your SoundBar see the Quick start guide EN 9 English 8 Product specifications Note Specifications and design are subject to change without notice Amplifier e Total output power e Europe Asia Pacific China Russia India 60W RMS 30 THD e Latin America 48W RMS 10 THD e Frequency response 20 Hz 20 kHz 3 dB e Signal to noise ratio gt 65 dB CCIR A weighted Input sensitivity e AUX 600 mV e Music iLink 250 mV Audio e S PDIF Digital audio input Coaxial IEC 60958 3 e Optical TOSLINK Main unit e Power supply 110 240 V 50 60 Hz e Power consumption 20 W Standby power consumption lt 0 5 W e Speaker impedance 4 ohm woofer 4 ohm tweeter e Speaker drivers 25 x 120 mm 1 x 5 woofer 38 mm 1 5 tweeter e Frequency response 150 Hz 20 kHz e Dimensions WxHxD 708 x 47 x 65 mm e Weight 1 03 kg Subwoofer e Impedance 8 ohm Speaker drivers 130 mm 5 25 woofer e Frequency response 20 Hz 150 Hz e Dimensions WxHxD 165 x 240 x 295 mm e Weight 2 6 kg Cable length 3 m Remote control batteries e 1x CR2025 10 EN
9. rce When Dolby signal is detected COAXIAL indicator blinks for three seconds e OPTICAL Lights up when you switch to optical input source When Dolby signal is detected OPTICAL indicator blinks for hree seconds e AUX Lights up when you switch to analog input source e MUSIC UNK Lights up when you switch o Music iLink input source Remote control AUX OPTICAL i music co ES ue 1 5 6e Bass VoL TREBLE 1 4 Te PHILIPS Replace battery Warning e Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type The product remote control may or may not contain a coin button type battery which can be swallowed Keep the battery out of reach of children at all times Kg Caution The battery contains perchlorate material handle it with care For information see www dtsc ca gov hazardouswaste perchlorate 4 Standby On Switch the SoundBar on or to standby O Source buttons e AUX Switch your audio source to the AUX connection e OPTICAL Switch your audio source to the optical connection e COAXIAL Switch your audio source to the coaxial connection e MUSIC iLINK Switch your audio source to the MUSIC iLINK connection SURROUND Switch to virtual surround mode on or off TREBLE ncrease or decrease treble VOL ncrease or decrease volume BASS ncrease or decrease bass
10. rts of this product can be made of glass Handle with care to avoid injury and damage Risk of overheating e Never install this product in a confined space Always leave a space of at least four inches around the product for ventilation Ensure curtains or other objects never cover the ventilation slots on the product Risk of contamination Do not mix batteries old and new or carbon and alkaine etc e Danger of explosion if batteries are incorrectly replaced Replace only with the same or equivalent type e Remove batteries if they are exhausted or if the remote control is not to be used fora long time Batteries contain chemical substances they should be disposed of properly Risk of swallowing batteries e The product remote control may or may not contain a coin button type battery which can be swallowed Keep the battery out of reach of children at all times If swallowed he battery can cause serious injury or death Severe internal burns can occur within two hours of ingestion f the battery has been swallowed seek immediate medical attention e When you change the batteries always eep all new and used batteries out of reach of children Ensure that the battery compartment is completely secure after you replace the battery f the battery compartment cannot be completely secured discontinue use of the product Keep out of reach of children and contact the manufacturer
11. upplied subwoofer 2 AUDIO IN AUX Connect to an analog audio output on the TV or an analog device 3 DIGITAL IN COAXIAL Connect to a coaxial audio output on the TV or a digital device 4 DIGITAL IN OPTICAL Connect to an optical audio output on the TV or a digital device Rear right AC MAINS Connect to the power supply Connect audio from TV and other devices Play audio from TV or other devices through your SoundBar Use the best quality connection available on other devices Note e The audio connections in this user manual are only recommendations You can use other connections too e If you play audio from the TV through your SoundBar make sure that the TV is muted Option 1 Connect audio through a digital optical cable Best quality audio Using an optical cable connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the device The digital optical connector might be labeled SPDIF SPDIF OUT or OPTICAL OPTICAL IN Option 2 Connect audio through a digital coaxial cable Good quality audio Using a coaxial cable connect the COAXIAL connector on your SoundBar to the COAXIAL DIGITAL OUT connector on the device The digital coaxial connector might be labeled DIGITAL AUDIO OUT DIGITAL IN COAXIAL IN Option 3 Connect audio through analog audio cables Basic quality audio Using an analog cabl
12. ve audio experience with surround sound modes Press SURROUND repeatedly to switch surround mode on or off Ly When surround mode is on the SURR on the front panel lights up Night mode For quiet listening decrease the volume of loud sounds when you play discs Night mode is only available for Dolby encoded TV programs DVD and Blu ray discs e fe music LINK Press and hold SURROUND to switch night mode on or off L gt When the night mode is on AUX indicator on the front panel blinks twice MP3 player Connect your MP3 player to play your audio files or music What you need e An MP3 player A 3 5mm stereo audio cable Play music 1 Connect the MP3 player to the SoundBar as described in the Quick start guide 2 Press MUSIC UNK Le MUSIC iLINK indicator on the front panel lights up 3 Press the buttons on the MP3 player to select and play audio files or music Apply factory settings You can reset your SoundBar to the default settings programmed at the factory Within three seconds press BASS VOL and TREBLE L gt When the restore factory settings process is complete the SoundBar automatically switches off and turns back on again 7 Wall mount Before you mount your SoundBar on the wall read all safety precautions see Safety on page 3 f you have any query contact Philips Consumer Care in your country Screw length diamete
Download Pdf Manuals
Related Search