Tripp Lite SmartRack Wall-Mount Roof Fan Kit - 2-120V high-performance fans; 210 CFM; 5-15P plug
Contents
1. Assembly Instructions SRFANWM Wall Mount Enclosure Cooling Solution Recommended Installation Fans mounted inside the Wall Mount cabinet draw air out of the cabinet to provide proper equipment cooling ao tipnpoaagang moinimimg radosan mnn HO OOO OOOO ooo oooOo 2 Mount the shroud casing over the fans using the supplied Mount the SRFANWM over the vents inside hardware the Wall Mount cabinet using the supplied hardware with airflow arrows and label facing toward the top of the cabinet 4 Plug the SRFANWM input cable into a power source such as an internal PDU For external power connection utilize the removable cable access panel a TRIPP LITE 1111 W 35th Street Chicago IL 60609 USA www tripplite com support Ei Secure the wire between each fan to the cabinet using the peel and stick cable anchor with tie 2011 Tripp Lite All rights reserved Assembly Instructions SRFANWM Wall Mount Enclosure Cooling Solution Alternative Installation Fans mounted outside the Wall Mount cabinet draw air out of the cabinet for proper equipment cooling E For external installation begin by 2 Mount the assembly over the vents on Ei Secure the wire between each fan to installing the fan into the shroud using the exterior of the Wall Mount cabinet the cabinet using the peel and stick the supplied hardware th2. reading the screws from the inside of cable anchor with tie the cabinet SAVE THESE INSTRUCTIONS This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual Read all instructions and warnings thoroughly before attempting installation Failure to comply may affect the warranty and cause property damage and personal injury e Install in a controlled indoor environment away from moisture temperature extremes flammable liquids and gasses conductive contaminants dust and direct sunlight e Inspect the shipping container and the unit for shipping damage Do not use the unit if it is damaged e Connect the unit to an outlet that is provided with appropriate overcurrent protection e When using tools use eye protection and follow all other safety precautions recommended by the tool manufacturer and required by applicable regulations e Keep hair clothing and loose objects away from the fan intakes There is a risk of property damage and personal injury e Do not block cover or insert objects into the openings of the unit E Plug the SRFANWM input cable into e Use of this equipment in life support applications where failure of this equipment can reasonably a power source such as an external be expected to cause failure of the life support equipment or to significantly affect its safety or source For connection to an internal effectivenes
3. s is not recommended Do not use this equipment in the presence of a flammable PDU utilize the removable cable access anesthetic mixture with air oxygen or nitrous oxide panel TRIPP LITE 1111 W 35th Street Chicago IL 60609 USA www tripplite com support 2011 Tripp Lite All rights reserved 201105092 93 3111
Download Pdf Manuals
Related Search