ADDER AdderLink X-DVI PRO
Contents
1. more of the following measures a Reorient or relocate the receiving antenna b Increase the separation between the equipment and the receiver c Connect the equipment to an outlet on a circuit different from that to which the receiver is connected d Consult the supplier or an experienced radio TV technician for help FCC Compliance Statement United States This equipment generates uses and can radiate radio frequency energy and if not installed and used properly that is in strict accordance with the manufacturer s instructions may cause interference to radio communication It has been tested and found to comply with the limits for a class A computing device in accordance with the specifications in Subpart J of part 15 of FCC rules which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment Operation of this equipment in a residential area may cause interference in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment Canadian Department of Communications RFI statement This equipment does not exceed the class A limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communication2. use of this product that you are unable to resolve please contact your supplier Safety information For use in dry oil free indoor environments only Do not use to link between buildings Ensure that the twisted pair interconnect cable is installed in compliance with all applicable wiring regulations Do not connect the CATx link interface RJ45 style connector to any other equipment particularly network or telecommunications equipment Warning the power adapter contains live parts No user serviceable parts are contained within the power adapter do not dismantle Plug the power adapter into an earthed socket outlet close to the unit that it is powering Replace the power adapter with a manufacturer approved type only Do not use the power adapter if the power adapter case becomes damaged cracked or broken or if you suspect that it is not operating properly If you use a power extension cord with the units make sure the total ampere rating of the devices plugged into the extension cord do not exceed the cord s ampere rating Also make sure that the total ampere rating of all the devices plugged into the wall outlet does not exceed the wall outlet s ampere rating Do not attempt to service the units yourself The units and power supplies can get warm in operation do not situate them in an enclosed space without any ventilation The units do not provide ground isolation and should not be used for any applications th
3. AdderLink X DVIPRO ADDER Digital video and USB extenders CONTENTS Contents Welcome Operation RIT NG asec ed meen entire ec cesarean E EREE 2 Operation a eipemnenIaialE 10 WhatsiiMm NW a eed cas testi netcee eoeie estpeaetuetatesgacaceaenstoteaianntnctads 3 G neral RUSS apnin cntastede aeeresata aneen 10 What you may additionally need siisisssseiessscisacnsasanssadsacessinoasneaas 4 Video display EDID information sicirccccosincencseetorecocmenscentace 10 HADMI 1 3a operatios naaa 10 Installation Power and activity MdIcCatOYS misiis cicien 10 CONNECUONS pasmina na aaa aE 5 z E Mounting the modules desk Or rack 5 Further information Connections at the local Modules isiissssisisinsiinsinannss 6 TroubleshootiNg asridir iiaa iaa 11 PF CMU M ninin oi ae anaiai 7 Getting assistante cgaditasatasinaconcarsnataninasnngunatuanisadeatiadandanasiueennieans 11 Connections at the remote MOdUIE cscceeeeeeeeeeeeeeeeeees 8 Warranty eat cen asada tet a ep ante a nse deat 12 Power CONNECCION cisini aoia 9 Safety informatio i tacodsccrctecdstetadtanehostanaisdbicnaaeisincsaintietaaaeaee 12 Radio Frequency EMmeney icccicct cus lcsccccpaincattabiniercseeloendosenmccaneds 13 ADDER CONTENTS OPERATION INSTALLATION WELCOME FURTHER INFORMATION Welcome Thank you for choosing the AdderLink X DVIPRO or X DVIPRO MS2 extenders These compact modules present the quickest way to extend high quality DVI digital vide
4. Connect the output lead of the supplied power adapter to the socket labelled Power on the remote module X DVIPRO Output lead from the power adapter X DVIPRO MS2 Output lead from the power adapter 2 Insert the IEC connector of the separate power lead into the corresponding socket of the power adapter Connect the other end of the power lead to a nearby mains socket 3 After all connections are made power up the monitor and remote module then the local module if using the X DVIPRO MS2 variant and finally switch on the computer ADDER OPERATION INSTALLATION WELCOME CONTENTS FURTHER INFORMATION Operation Operation General use In use the X DVIPRO and X DVIPRO MS2 modules should be transparent the system and its peripherals should operate exactly as normal the only difference being that they are now up to 60 metres apart Video display EDID information Extended Display Identification Data or EDID is an industry standard scheme which allows video displays to declare their capabilities to the computer s video adapter circuitry allowing the latter to optimise their outputs accordingly Since the widespread adoption of the scheme video adapters have become increasingly dependent on receiving relevant EDID information during start up before they will output anything more than a rudimentary video signal Each time that the remote module is powered on it attempts to read the EDID infor
5. X DVIPRO MS2 modules can be situated on a desk or alternatively for larger installations mounted within an optional rack mount chassis Desk mount Apply the supplied self adhesive rubber feet to the underside of the module Rack mount 1 Place the rack securing plate available as a separate kit onto the front of the module and secure it with the two countersunk screws Orient the X DVIPRO or X DVIPRO MS2 module on its side so that its labelled face is the correct way up Slide the module into the required rack position The rectangular cut out in the front upper lip of the rack allows the two screws on the module s upper edge to slide through 4 The rack mount chassis has a series of holes in its floor that are spaced to accommodate the two screws on the module s lower edge Ensure that the screws correctly locate into the two holes of the chosen slot The rack securing plate on the module should now be flush with the front of the rack mount chassis Use the third pan head screw in the top hole of the rack securing plate to fasten the module to the rack ZJ Cane ENNS nono WHOUOUOOO JASI Q N ADDER OPERATION INSTALLATION WELCOME CONTENTS FURTHER INFORMATION Connections at the local module 1 Where possible ensure that power is disconnected from the computer 3 Use the supplied USB cable to link the USB socket of the local module to a i system to b
6. at require ground isolation or galvanic isolation ADDER INSTALLATION WELCOME CONTENTS OPERATION z PAS me gt E 2 Z 12 Radio Frequency Energy A Category 5 or better shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances All other interface cables used with this equipment must be shielded in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances European EMC directive 2004 108 EC This equipment has been tested and found to comply with the limits for a class A computing device in accordance with the specifications in the European standard EN55022 These limits are designed to provide reasonable protection against harmful interference This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio or television reception However there is no guarantee that harmful interference will not occur in a particular installation If this equipment does cause interference to radio or television reception which can be determined by turning the equipment on and off the user is encouraged to correct the interference with one or
7. e connected vacant USB socket on the computer ADDER 2 Use the supplied DVI D link cable to connect the DVI input socket of the local module to the digital video output socket of the computer Note Do not use USB cables longer than 3 metres to connect the local module to the computer CONTENTS To USB port MS2 variant only Optionally attach a second USB connection from the computer system using the supplied USB cable WELCOME To video output port Feeds the UPPER two USB sockets on the remote unit MS2 variant only Optionally attach a second video input from the computer system using the supplied DVI D link cable To second USB port Feeds the LOWER two USB To first USB port 3 sockets on the remote unit MS2 variant only Optionally link one or two stereo audio inputs to the module using 3 5mm audio cable s One 3 5mm audio cable is supplied with MS2 variant packages OPERATION To secondary video output port FURTHER INFORMATION To primary video output port To secondary audio port To primary audio port 4 Connect the link cable see page 2 for cable advice to the local module Power connection socket labelled TO REMOTE The X DVIPRO local module is designed to derive its power from the host computer via the USB connection two USB connections in the case of the MS ADDER version If this is not possible then you will need to use one or two optional Adder power adapter
8. esent Yellow e On when a valid DVI video input signal is being received from the local module Flashes regularly twice per second when no valid DVI video signal is being received from the local module Note On MS2 variants the link ports are independent so failure of one link does not affect the video or USB status of the other link ADDER WELCOME CONTENTS INSTALLATION OPERATION FURTHER INFORMATION 10 Further information ADDER Troubleshooti Getti i a roubles ooting etting assistance If you experience problems when installing or using the X DVIPRO X DVIPRO If you are still experiencing problems after checking the list of solutions in the 2 MS2 modules please check through this section for a possible solution If your Troubleshooting section then we provide a number of other solutions Z problem is not listed here and you cannot resolve the issue then please refer to a the Getting assistance section e Adder Technology website www adder com S No video image is displayed on the remote monitor se the Support section of our website for the latest solutions and driver e Check the yellow indicators on the local and remote modules while no keys are pressed on the keyboard and no mouse movements are being made Email z both indicators should be continually on when a valid video signal is present A EMAN se pponaeddercon 3 LOCAL If the yellow indicator is giving a regular flash tw
9. ice per second e Fax inthe UK 01954 780081 then the video feed to the local module is not valid Try connecting a DVI inthe US 1 888 275 1117 s monitor preferably using the same DVI link cable as used with the local module directly to the computer and check for a correct image e Phone intheUK 01954 780044 REMOTE If the yellow indicator is giving a regular flash twice per second inthe US 1888 275 3337 z then the video feed via the link cable is not valid If the link cable is long try z using a short link cable temporarily to check for basic operation lt If the yellow indicators are off then the link cable is not properly connected z Z s z z H z ea a z PAS me gt E 2 Z 11 Warranty Adder Technology Ltd warrants that this product shall be free from defects in workmanship and materials for a period of two years from the date of original purchase If the product should fail to operate correctly in normal use during the warranty period Adder will replace or repair it free of charge No liability can be accepted for damage due to misuse or circumstances outside Adder s control Also Adder will not be responsible for any loss damage or injury arising directly or indirectly from the use of this product Adder s total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product If any difficulty is experienced in the installation or
10. mation from the connected DVI video monitor If the attempt is successful the information is transferred to the local module and stored within non volatile memory This information is then made available to the computer s video adapter when required On MS2 variants EDID is handled independently for the two video connections allowing completely different video display configurations on the two ports HDMI 1 3a operation Using optional HDMI to DVI converter cables Adder part number VSCD11 the AdderLink X DVIPRO MS can support HDMI video and audio up to the 165MHz clock rate 1920 x 1080 at 60Hz 24 bit colour Eight channels of HDMI audio are supported with sample sizes of 16 20 or 24 bits at 32KHz 44 1kHz 48kHz 88 2kHz 96kHz 176 4kHz or 192kHz simultaneously with the jack audio Note The High bandwidth Digital Content Protection HDCP and Consumer Electronics Control CEC schemes are not supported Power and activity indicators Each module provides two indicators to confirm power status and also feedback about the various input signals Local module Green e On when power is present Yellow e On when a valid DVI video input signal is being received from the computer e Off when the CATx link cable is disconnected Note On MS2 variants the link ports are independent so failure of one link does not affect the video or USB status of the other link Remote module Green e On when power is pr
11. nel and dual stereo audio channels on MS2 variants e Extensions of 60m may be achieved with single uninterrupted runs of recommended cable Adder CAT7a patch cable at full resolution e Extensions of 55m may be achieved with single uninterrupted runs of CAT6 bulk trunk not patch cable at full resolution e Adder does not recommend CAT5e cables for use with this product However 45m may be typically achieved with single uninterrupted runs of CAT5e bulk trunk not patch cables at full resolution e Overall cable runs must be reduced by 5m for each additional cable coupling e Run specifications may be increased by 10m when using resolutions of 1280 x 1024 or lower e All patch cables should be as short as possible and should be no longer than 2m e It is recommended that Adder CAT7a patch cables are used for maximum performance Recommended 50m link cable for best results Adder part number VSCAT7 50 ADDER CONTENTS WELCOME OPERATION INSTALLATION FURTHER INFORMATION Whats in the box AdderLink X DVIPRO standard modules Remote module AdderLink X DVIPRO MS2 dual video audio modules Local Remote module module USB cable 2m type A to B Additional video cable DVI D to DVI D Video cable DVI D to DVI D Additional USB cable 2m Additional 12 5W power adapter and country specific power lead Q Q AO Eight self adhesive
12. o plus USB keyboard and mouse plus on MS2 variants a second digital video channels and two stereo audio channels with an additional two USB peripherals up to 60 metres away from your computer Thanks to our long involvement and investment in extender technology we have succeeded in overcoming the numerous problems associated with CAT7a 60m max CAT6 55m max CAT5e 45m max X DVIPRO X DVIPRO Local Remote Additional CATx link on M82 variants X DVIPRO link with direct cable connection Additional video channel and dual stereo audio channels on MS2 variants Cable distance rules e Extension distances up to 60m are supported extending digital video signals Using our proprietary transmission techniques the X DVIPRO and X DVIPRO MS2 modules can reliably transfer video rates up to 165 Mpixels per second This is in addition to two USB channels for keyboard and mouse all via the same single length of Category 5e 6 or 7a twisted pair cabling The AdderLink X DVIPRO and X DVIPRO MS2 extender modules have been designed to be quick to install and totally transparent in operation CAT7a 50m max CAT6 45m max CAT5e 35m max Patch lead lt 2m max X DVIPRO Patch lead lt 2m max X DVIPRO Local Patch panel Patch panel Additional CATx link on MS2 variants X DVIPRO link with cable and patch panel connections Additional video chan
13. rubber feet The MS2 variant package includes all of the above ancillary items plus 3 5mm jack to jack stereo audio cable ADDER CONTENTS WELCOME OPERATION INSTALLATION FURTHER INFORMATION What you may additionally need Power adapter and country specific power lead for X DVIPRO local module if powering via the USB port is not possible In such cases two power adapters are required for X DVIPRO MS2 local modules Part number PSU IEC 5VDC 2 5A Extra 3 5mm jack to jack stereo audio cable Part number VSC22 50 metre CAT7 link cable Part number VSCAT7 50 8988 HDMI to DVI D video cable Part number VSCD11 oe Rack mount chassis Part number X RMK CHASSIS Rack mount kit for X DVIPRO Part number X RMK FASCIA Rack mount kit for X DVIPRO MS2 Q Part number X RMK FASCIA DUAL ADDER CONTENTS WELCOME OPERATION INSTALLATION FURTHER INFORMATION Installation Connections Installation of the X DVIPRO and X DVIPRO MS2 modules is straightforward and requires minimal configuration in most cases e Connections at the local module e Connections at the remote module Note After all connections are made power up the monitor and the REMOTE module first followed by the LOCAL module if using the X DVIPRO MS2 variant and then switch on the computer Mounting the modules desk or rack The X DVIPRO and
14. s Optionally for X DVIPRO and X DVIPRO MS2 units 1 Connect the output lead of the optional power adapter s to the socket s labelled Power on the local module CATx link cable X DVIPRO Use an optional power adapter only if powering from the host via USB is not possible MS2 variant only Attach a second category 5e 6 or 7a link cable up to 60 metres in length to the upper socket on the MSZ local modul Note After all connections are made power up the monitor and the REMOTE module first followed by the LOCAL module if using the X DVIPRO MS2 variant with power adapters and then switch on the computer Secondary CATx link cable Primary CATx link cable X DVIPRO MS2 Use two optional power adapters if powering from the host via dual USB connections is not possible OPERATION INSTALLATION WELCOME CONTENTS Do not use squid cables or power splitters Two separate power adapters must be used FURTHER INFORMATION 2 Insert the IEC connector of the separate power lead s into the corresponding socket s of the power adapter s Connect the other end of the power lead s to one two nearby mains socket s 7 Connections at the remote module 1 Place the remote module adjacent to the user location 3 Connect the leads from the i 2 Connect the DVI D lead from the video monitor to the DVI output socket of keyboard and mouse to ADDER the remote module the
15. s Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limites applicables aux appareils num riques de la classe A prescrites dans le r glement sur le brouillage radio lectriques publi par le minist re des Communications du Canada ADDER INSTALLATION WELCOME CONTENTS OPERATION z PAS me Bie no Z 13 2011 Adder Technology Limited All trademarks are acknowledged Release 2 0d November 2011 Part No MAN X DVIPRO Adder Technology Limited Unit 5 Saxon Way Bar Hill Cambridge CB23 8SL United Kingdom Tel 44 0 1954 780044 Fax 44 0 1954 780081 T www ctxd com Adder Corporation 350R Merrimac Street Newburyport MA 01950 United States of America Tel 1 888 932 3337 Fax 1 888 275 1117 Adder Asia Pacific 6 New Industrial Road Hoe Huat Industrial Building 07 01 Singapore 536199 Tel 65 6288 5767 Fax 65 6284 1150 ADDER INSTALLATION WELCOME CONTENTS OPERATION z PAS me gt E 2 Z 14
16. two USB sockets on the remote module Note On the single head variant it is not important which of the four sockets are used CONTENTS To keyboard mouse and other USB peripherals IMPORTANT The total current that may be drawn from the USB ports is 1 2A which should be sufficient for a keyboard mouse no more than 100mA each and any two other devices 500mA maximum each If more power for USB devices is required please use a powered USB hub WELCOME ae ee MS2 variant Connect the leads from the keyboard and mouse to the two USB sockets on the remote module MS2 variant only Optionally Fed from the UPPER USB attach a second DVI video socket on the local unit monitor To keyboard mouse and other USB Fed from the LOWER USB peripherals socket on the local unit OPERATION MS2 variant only Optionally connect one or two sets of stereo speakers to the module To secondary video monitor One 3 5mm audio cable is supplied with MS2 variant packages FURTHER INFORMATION To primary video monitor To secondary speakers To primary speakers 8 4 Connect the link cable see page 2 for cable advice to the remote module socket labelled TO LOCAL CATx link cable MS2 variant only Attach a second category 5e 6 or 7a link cable up to 60 metres in length to the upper socket on the MS2 remote module Secondary CATx link cable Primary CATx link cable Power connection 1
Download Pdf Manuals
Related Search