Philips AC4084
Contents
1. 1 Important Safety Read this user manual carefully before you use the appliance and save it for future reference Danger e Do not let water or any other liquid or flammable detergent enter the appliance to avoid electric shock and or a fire hazard e Do not clean the appliance with water any other liquid or a flammable detergent to avoid electric shock and or a fire hazard e Do not spray any flammable materials such as insecticides or fragrance around the appliance e The water in the water bucket Is not suitable for drinking Do not drink this water and do not use it to feed animals or to water plants When you empty the water bucket pour the water down the drain UN Warning e Check if the voltage indicated on the bottom indicated at the rear of the appliance corresponds to the local power voltage before you connect the appliance e Ifthe power cord is damaged you must have it replaced by Philips a service center authorized by Philips or similarly qualified persons in order to avoid a hazard e Do not use the appliance if the plug the power cord or the appliance itself is damaged e This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety e Children should b2. water bucket 4 Screw the top cap tightly back onto the water bucket 18 EN 3 Rinse the humidification filter tray under a running tap Clean the humidification filter tray Clean the humidification filter tray every week to keep them hygienic 1 Remove the water bucket out of the appliance Then remove the humidification filter tray from the appliance Note e If necessary use a mild detergent to clean the humidification filter tray In this case rinse the humidification filter tray thoroughly 4 Dry the humidification filter tray with a soft dry cloth 5 Place the humidification filter back and slide the humidification filter tray back to the appliance Note e Remove the water bucket first before you can remove the humidification filter tray 2 Take the humidification filter out of the humidification filter tray t EN 19 6 Clean the pre filter and humidification filter Note Clean the pre filter Note e Clean the pre filter when the filter light 5 flashes to ensure optimal functioning of the appliance e Only the pre filter and humidification filter are washable All other filters are not washable Rinse the humidification filter every week to keep It hygienic When the filter light 5 flashes you have to clean the pre filter and descale the humidification filter The light flashes approximately for
3. Filter light 0 15 Clean the pre filter and flashes descale the humidification filter Filter light B Replace the multi care flashes filter Filter light Replace the activated flashes carbon filter and the HEPA filter Filter light B Replace the humidification flashes filter Understand the healthy air protect lock This appliance is equipped with the Healthy air protect lock to make sure that the filters are in optimal condition when the appliance is operating When the filter is almost full and has to be replaced the specific filter light B 8 8 B start to flash When you do not replace the filter in time L gt The appliance stops operating and it is locked L The specific filter light 8B 9 0 8B illuminate continuously Note e The appliance is locked after the filter light flashing for approximately 2 weeks e Approximately one day before the appliance locks it beeps every 30 minutes to inform you that the filter needs to be replaced L gt The air quality light shows the current Switch on and off the air quality appliance The appliance always operates under air purification combined with humidification If you want to operate the appliance only as an air purifier you need to empty the water in the water bucket 1 Plug the appliance into the power supply L gt The CURRENT HUMIDITY light shows the current humidity level HUMIDITY SET TERE HU
4. Make sure that the air quality sensor is clean and dry see the chapter Clean your appliance section Clean the air quality sensor and air humidity sensor e The air quality sensor is dirty Clean the air quality sensor see the chapter Clean your appliance section Clean the air quality sensor and air humidity sensor under e There is not enough ventilation in the room Open a window to improve the air circulation When water vapor Is very fine It Is invisible This appliance has a specially designed humidification filter that produces very fine water vapor Therefore you cannot see the water vapor Remove the cover of the air quality humidity sensors and then gently blow moist air into the opening After a while the CURRENT HUMIDITY indication changes Note that if the initial CURRENT HUMIDITY indication is already 60 the indication cannot show an even higher humidity when you blow moist air towards the sensor EN 33 Problem The appliance produces a strange smell need cleaner air because have an allergy The appliance is extra loud The appliance still indicates that need to replace a filter but already did 34 EN Possible solution The first few times you use the appliance it may produce a plastic smell This is normal However if the appliance produces a burnt smell contact your Philips dealer or an authorized Philips service centre The appliance may also produce an
5. appliance and unplug it PURIFIER A E ZT Lt HUMIDIFIER im it EN 27 6 Place the new HEPA filter in the appliance first 7 Then place the new activated carbon filter in the appliance Note e Make sure that the side with two clips is pointing towards you and that all hooks of the pre filter are properly attached to the appliance 28 EN 9 To reattach the front panel mount the panel onto the top of the appliance first 1 Then gently place the panel against the body of the appliance 2 10 Reset the activated carbon filter and the HEPA filter lifetime see the chapter Reset the filter lifetime counter Replace the humidification filter Replace the humidification filter when the filter light flashes O 7 3 ELEAN aif TE PA dS ay i 9 A REPLACE 4 ET n se Switch off the appliance and unplug it o PURIFIER ZPE HUMIDIFIER in i 2 Remove the water bucket from the 5 Put the new humidification filter back and appliance slide the humidification filter tray back to the appliance 3 Remove the humidification filter tray from the appliance 4 Remove the packaging material from the humidification filter SE N K Ss SS i NS EN 29 8 Addthe multi care filter Note e This is applicable only for AC4084 AC4084 comes with the pre filter activated carbon filter and the HEPA filter For this appl
6. every two weeks pia conver i PA eK K e REPLACE Jro 30 8 FILTER o REM The filter light 5 keeps flashing for 24 hours After you have cleaned the pre filter and descale the humidification filter the light stops flashing and the filter lifetime is reset automatically When you turn off the appliance the light stops flashing 20 EN Switch off the appliance and unplug it o PURIFIER ZPM HUMIDIFIER WE Place your fingers in the recesses of the side panels then lift and detach the bottom of the font panel towards you Gently lift the top part of the front panel out of the appliance 3 Toremovethe pre filter press the two clips down and pull the filter towards you 4 Remove the multi care filter from the pre filter 4 5 Wash the pre filter under a running tap If the pre filter is very dirty use a soft brush to brush away the dust 6 Air dry the pre filter 7 Slide the multi care filter if available into the pre filter 8 Put the pre filter back into the appliance Attach all hooks properly to the appliance To reattach the front panel insert the top hooks into the top of the air appliance first 1 Then push the panel against the body of the appliance 2 Alternatively you can clean the pre filter by removing the dust with a vacuum cleaner Make sure that the pre filter is completely dry If it is still wet bacteria may mult
7. the front panel is closed properly The humidification filter tray is not placed properly In this case the appliance does not work and the CURRENT HUMIDITY lights 30 40 50 or 60 flash Switch off the appliance Remove the water bucket and then remove and slide the humidification filter tray back to the appliance Then switch on the appliance and try again It is normal that the cap of the water bucket Is slightly wet when you remove it from the appliance However if water drops keep dripping from the bottom of the water bucket check if the cap has been screwed onto the water bucket tightly If the problem persists contact the Consumer Care Center in your country This is normal The water in the water bucket is used to fill the humidification filter tray the humidification filter also absorbs some of the water e Make sure that you have put the humidification filter in the humidification filter tray e The humidification filter is dirty Rinse and or descale the humidification filter see the chapter Clean the pre filter and humidification filter section Clean the humidification filter e Make sure that both the PURIFIER and HUMIDIFIER lights are on The white deposits are called scale and they consist of minerals from the water Scale on the humidification filter affects the humidifying performance Therefore you have to descale the humidification filter when the filter light 5 flashes See the chapter Clean
8. the pre filter and humidification section Clean the humidification filter Problem No air comes out of the air outlet The fan speed does not change when the silent mode is activated The airflow that comes out of the air outlet is significantly weaker than before The air quality does not improve even though the appliance has been operating for a long time The color of the air quality light always stays the same do not see water vapor coming out of the appliance Is it working want to check whether the air humidity sensor works or not Possible solution Plug the appliance into the power supply and switch on In silent mode the fan speed is set to a very low level If you want to change the fan speed and leave the silent mode press the SPEED button once or more times to set the desired fan speed e The pre filter is dirty Clean the pre filter see the chapter Clean your appliance section Clean the pre filter and humidification filter e Make sure that you have removed all packaging material from the filters e One of the filters has not been placed in the appliance Make sure that all filters are properly installed in the following order starting with the innermost filter 1 HEPA filter 2 activated carbon filter 3 multi care filter if available and 4 pre filter e The air quality sensor is wet The humidity level in your room is high and causes condensation
9. to the water bucket until you feel and hear a appliance rattling sound 5 Unscrew the top cap of the water bucket 8 Place the water bucket back into the appliance 6 Fill the water bucket with cold tap water EN 9 4 Use the appliance Understand the air quality light Color of the air quality light Air quality level Blue good Purple fair Red bad The air quality light automatically goes on when the appliance is switched on e The built in air quality sensor measures the air quality and automatically selects the appropriate color of the air quality light When the air is clean the color of the air quality light is in blue When the air quality deteriorates the color of the air quality light changes to purple or red Understand the humidity light indicator The appliance is equipped with a built in humidity sensor The CURRENT HUMIDITY lights 30 40 50 or 60 show the current humidity e The accuracy of the humidity indication is approximately plus or minus 5 e t takes some time to measure the humidity level in the room Understand the auto mode The built in air quality sensor automatically measures the ambient air quality and selects the most appropriate fan speed 10 EN Understand the healthy air protect alert The filter lights indicate that the filter has to be cleaned or be replaced Different Follow this healthy air protect alert lights
10. unpleasant smell when one of the filters is dirty In this case clean or replace the filter concerned You can change the air quality sensor sensitivity see the chapter Use the appliance section Set the sensitivity of the air quality sensor to make the appliance clean the air even better e You have not removed all packaging material from the filters Make sure that you have removed all packaging material e You can change the fan speed to lower fan speed level Perhaps you did not press the RESET button properly Plug in the appliance press the button to switch on and press the RESET button for two seconds 11 Guarantee and service If you need information or if you have a problem please visit the Philips website at www philips com or contact the Philips Consumer Care Center in your country you find its phone number in the worldwide guarantee leaflet If there is no Consumer Care Centre in your country go to your local Philips dealer Order parts or accessories If you have to replace a part or want to purchase an additional part go to your Philips dealer or visit www philips com support If you have problems obtaining the parts please contact the Philips Consumer Care Center in your country you find its phone number in the worldwide guarantee leaflet EN 32 12 Notices Electomagnetic fields EMF This Philips appliance complies with all standards regarding electromagnetic fields EM
11. AR HUMIDIFIER im ik 2 Press the TIMER button to activate the timer L gt The TIMER light 1 4 or 8 goes on 3 Press the TIMER button repeatedly to choose the number of hours you want the appliance to operate The corresponding TIMER light goes on To deactivate the timer function press the TIMER button repeatedly until the TIMER light 1 4 or 8 is out Set the humidity level e Make sure that the water bucket is filled with water when you want to use the humidification function see the chapter Get started section Prepare for humidification You can set the desired humidity level only in AUTO mode When the humidity of the room reaches the desired level the humidity stays at this level constantly e Press the HUMIDITY SET button once or more times to set the desired air humidity to 40 50 or 60 L gt The corresponding HUMIDITY SET light 40 50 or 60 goes on HUMIDITY SET it RS mS HUMIDITY H i A a UTO zw ILENT amp NS B OST POWER RAR EN 15 e If you do not set the humidity level the HUMIDITY SET light goes off The humidifier humidifies the air under AUTO mode and the preset humidity level is 50 e If you change the fan speed SILENT or the humidifier automatically operates according to the fan speed level and the AUTO mode deactivates e Ifyou want to increase the humidity level in shorter time you can se
12. DA amp IER Ri Ed e Ifthe air quality light is in blue or in deep purple color this means the air quality is good or excellent and you can select a lower fan speed e On the other hand if the air quality light is in red or in purple color this means the air quality is bad or fair You can select the fan speed to clean the air quickly EN 13 Silent mode In silent mode the air filter operates very quietly 1 Press the button to switch on the appliance PURIFIER ZIE HUMIDIFIER in iit 2 Press the SPEED button to select the silent mode L gt The SILENT light goes on AAS ILENT To change to another fan speed press the SPEED button 14 EN Set the timer With the timer function you can let the appliance operate for a set number of hours When the set time has elapsed the appliance automatically switches off You can use the timer function in the following situations Situations You will see Choose a fan One of the SPEED lights speed manually or and one of the see Manual TIMER lights 1 4 or 8 are on The appliance The AUTO light is on is in auto mode One of the SPEED lights see Auto SILENT or and one of the TIMER lights 1 4 or 8 are on The appliance is The SILENT light and one in silent mode ofthe TIMER lights 1 4 or see Silent 8 are on mode Press the button to switch on the appliance PURIFIER S
13. F If handled properly and according to the instructions in this user manual the appliance is safe to use based on scientific evidence available today Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus In general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardization for early integration in Its products 36 EN Recycling wo Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC Never dispose of your product with other household waste Plea
14. MIDITY O LAY it E L gt All lights go on twice and you hear a beep Then the lights go out again 2 Press the button to switch on the appliance 2 u ee ER N EER 3 Press the button to switch off the lights are on appliance e Humidifier cannot be used alone without air purifier operating e Ifthe water bucket is empty the humidifier is switched off but the air purifier still operates In this way the appliance operates as an air purifier only PURIFIER light and REFILL WATER light are on EN 11 Set the sensitivity of the air quality sensor People with certain health problems for example allergies or asthma have a greater need for healthy air For this reason the appliance allows you to adjust the sensitivity of the air quality sensor If you set it to higher sensitivity level the appliance starts cleaning the air at lower pollution level There are 3 sensitivity levels e standard e sensitive extra sensitive The pollution sensor is set to standard sensitivity You can adjust the sensitivity of the air quality sensor in the following way Note e When it is set to a higher sensitivity the appliance starts cleaning the air at lower pollution levels to make the air even cleaner Make sure the purifier is on 2 Press the SPEED and the HUMIDITY SET buttons simultaneously O AUTO Fah punon P O SILENT o a O CURRENT 30 HUMIDITY 0 IN AT i
15. Register your product and get support at www philips com welcome AC4084 AC4085 PHILIPS User manual 3 PHILIPS Co nte nts 7 Replace the filters Replace the multi care filter Replace the activated carbon filter and the HEPA filter 1 Important 4 ae Replace the humidification filter Safety 4 2 Your combi air purifier and humidifier 6 j oe What s in the box 6 ee 5 9 Reset the filter lifetime counter 31 Install filters 7 i Prepare for humidification 8 10 Troubleshooting 32 4 Use the appliance 10 11 Guarantee and service 35 Understand the air quality light 10 Order parts or accessories 29 Understand the humidity light indicator 10 Understand the auto mode 10 12 Notices 36 Understand the healthy air protect alert 10 Electomagnetic fields EMF 36 Understand the healthy air protect lock 10 Compliance with EMF 26 Switch on and off the appliance 11 Recycling 36 Set the sensitivity of the air quality sensor 12 Change the fan speed 13 Auto 15 Manual 13 Silent mode 14 Set the timer 14 Set the humidity level 15 Water level 16 5 Clean your appliance 17 Clean the body of the appliance 17 Clean the air quality sensor and humidity sensor 17 Clean the water bucket 18 Clean the humidification filter tray 19 6 Clean the pre filter and humidification filter 20 Clean the pre filter 20 Clean the humidification filter 22 Rinse the humidification filter 22 Descale the humidification filter 23 Cleaning schedule 24 EN 3
16. e water bucket Do not put fragrance in the water bucket e If you do not use the humidification function for a long time clean the water bucket and humidification filter tray Dry the humidification filter e If you need to move the appliance disconnect the appliance from the power supply first Then empty the water bucket Carry the appliance horizontally by both handles on the sides of the appliance EN 5 2 Your combi air purifier and humidifier Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www Philips com welcome Read this user manual carefully before you install and use the unit Save it for future reference What s in the box Check and identify the contents of your package Filter 4 HEPA filter AC4144 Filter 3 Activated carbon filter AC4143 Filter 2 Multi care filter AC4141 Sold separately from AC4084 Filter 5 Humidification Filter 1 Pre filter filter AC4148 User manual Quick start guide Warranty 3 G ef Sta rted 3 Remove all the filters from the appliance Install filters The appliance comes with all filters fitted inside Remove the packaging of the filters before you can use the appliance Remove all filters unpack them and place them back into the appliance described as follows 4 Remove all packaging material from the filters Tip e Wh
17. e supervised to ensure that they do not play with the appliance e Do not block the air inlet and outlet e g by placing items on the air outlet or in front of the air inlet EN a Caution e This appliance is not a substitute for proper ventilation regular vacuum cleaning or use of an extractor hood or fan while cooking e Ifthe power socket used to power the appliance has poor connections the plug of the appliance becomes hot Make sure that you plug the appliance into a properly connected power socket e Always place and use the appliance on a dry stable level and horizontal surface e Leave at least 20cm free space behind and on both sides of the appliance and leave at least 30cm free space above the appliance e Do not place anything on top of the appliance and do not sit on the appliance e Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance e Make sure all filters are properly installed before you switch on the appliance e Only use the original Philips filters specially intended for this appliance Do not use any other filters e Avoid knocking against the appliance the air inlet and outlet in particular with hard objects e Always lift or move the appliance by both handles at the sides of the appliance e Do not insert your fingers or objects into the air outlet or the air inlet to prevent physical injury or malfunctioning of the app
18. ed e If you remove the front panel for filter changing while the appliance is switched on all lights on the control panel are off and the appliance stops operating e Once the front panel is placed back to the appliance all lights flash twice Then the appliance returns to its operating state Replace the multi care filter e The multi care filter is available for AC4085 only For AC4084 the multi care filter is sold separately e The multi care filter is not washable nor vacuum cleanable Replace the multi care filter when the filter light B flashes op CLEAN de PA E RESET REPLACE EE 7 Baule FILTER ET Tip e When you remove or insert filters place the appliance against a wall for more stability Insert the filters in the correct position e Make sure that you place the filters in the order of HEPA filter activated carbon filter multi care filter and finally the pre filter e Make sure that the side with the tag is pointing towards you 1 Switch off the appliance and unplug it o PURIFIER TPE HUMIDIFIER im i 2 Place your fingers in the recesses of the side panels 3 Gently pull the bottom of the panel out then lift the top part of the front panel towards you EN 25 D Remove the multi care filter if available 8 Place the filter back in the appliance 6 Remove all packaging material from the 7 Slide the new mul
19. en you remove or insert filters place the appliance against a wall for more stability Note Insert the filters in the correct position Make sure that you place the filters in the order of HEPA filter activated carbon filter multi care filter and finally the pre filter The multi care filter is sold separately from AC4084 Make sure that the side with the tag is pointing towards you 5 Put the filters back into the appliance Place your fingers in the recesses of the side panels 2 Gently pull the top part of the front panel out then lift the top part of the front panel towards you 6 Slide the multi care filter if available into the pre filter EN 7 J Place the pre filter in the appliance idi i aa pe Mel 1A 016 SE Prepare for humidification 1 Pull the water bucket from the side of the appliance Note e Make sure that the side with the two clips is pointing towards you and that all hooks of the pre filter are o properly attached to the purifier 2 Pull the humidification filter tray from the appliance 8 To reattach the front panel mount the panel onto the top of the appliance first 1 Then gently place the panel against the body of the appliance 2 3 Remove the packaging material from the humidification filter 8 EN 4 Put the humidification filter back and slide 7 Screw the top cap tightly back onto the the humidification filter tray back
20. iance only the filter light 5 and the filter light 8 8 activated carbon filter and HEPA filter are activated To enjoy the benefits of the multi care filter you can purchase this filter separately In combination with the HEPA filter the multi care filter filters out dust pollen and ultra fine particles Activate the multi care filter After you have installed the multi care filter you can activate it as follows Note e For information of how to install the multi care filter see the chapter Replace the filters section Replace the multi care filter 1 Switch off the appliance 2 Press the RESET button once O CLEAN ii BAS 0 8 REPLACE O 8 8 8 FILTER 0 8 Sik is A 30 EN L gt The filter lights 5 8 8 and Bare on The filter light B is off Ve gt E ar aE dK R lt EL O ss EEN REPLACE bal FILTER aa en A 3 Press and hold the RESET button for two seconds L The multi care filter lifetime is activated The filter light B is on Vee 1J 5 CLEAN ser Bence RESET REPLACE all FILTER BRIE Note e To deactivate the multi care lifetime press and hold the RESET button again for two seconds Then the filter light is off 9 Reset the filter lifetime counter When you replace the filters it is important that you also reset the filter lifetime counter afterwards This allows the appliance to be in
21. iply in it and shorten the lifetime of the pre filter Make sure that the side with two clips is pointing towards you and that all hooks of the pre filter are properly attached to the appliance EN 21 Remove the humidification filter from the Clean the humidification filter ne umidification filter tray Rinse the humidification filter every week to keep it hygienic In addition descale the t humidification filter when the filter light 5 flash Rinse the humidification filter Switch off the appliance and unplug it Note nm SARAH T e You have to remove the water bucket first before you can remove the humidification filter tray see the chapter Prepare for humidification 5 Clean the humidification filter gently with the cleaning brush supplied under a slowly running tap 2 Remove the water bucket from the appliance 6 Put the humidification filter back into the humidification filter tray 3 Remove the humidification filter tray from the appliance 22 EN Remove the humidification filter from the Descale the humidification filter 4 humidification filter tray Note e Itis important to descale the humidifying filter to avoid scale build up which seriously affects the humidifying performance 1 Switch off the appliance and unplug It o PURIFIER TRE HUMIDIFIER Ma Note e You have to remove the water bucket first before you ca
22. lect higher fan speed e The appliance comes with a smart memory function it can memorize the settings when the appliance is switched off e g electricity shortage When the appliance is plugged in switched on again it automatically starts at the previous setting Water level The water level in the water bucket is visible through the water level window on the side of the appliance When there is not enough water in the water bucket the REFILL WATER light flashes to indicate that you have to refill the water bucket oe REFILL Wated 40 50 20 Nef gt e Appliance can operate under air purification only when the water in the bucket is out and the REFILL WATER light flashes Humidification function can only be activated when the bucket is filled with water 16 EN 5 Clean your appliance e Always unplug the appliance before you clean it e Never immerse the appliance in water or any other liquid e Never use abrasive aggressive or flammable cleaning agents such as bleach or alcohol to clean any part of the appliance e Only the pre filter and humidification filter are washable Other air purifier filters are NOT washable nor vacuum cleanable Clean the body of the appliance Regularly clean the inside and outside of the appliance to prevent dust from collecting Wipe away dust with a soft dry cloth from the body of the appliance 2 Clean the air inlet and the air out
23. let with a soft dry cloth Clean the air quality sensor and humidity sensor Clean the air quality and humidity sensors every month for optimal functioning of the appliance Clean it more frequently if you use the appliance in a dusty environment Note e When the humidity level in the room is very high it is possible that condensation develops on the air quality sensor As a result the air quality light may indicate that the air quality is bad even though the air quality is good In this case you have to clean the air quality sensor or use one of the manual speed settings Clean the inlet and outlet of the air quality and air humidity sensors with a soft brush Remove the cover of the air quality and air humidity sensors aaa 3 Clean the sensors the dust inlet and the dust outlet with a lightly moistened cotton swab Dry them with a dry cotton swab 5 Reattach the sensor cover EN 17 5 Shake the bucket to and fro with both hands to clean the inside of the water bucket Clean the water bucket Clean the water bucket every day to keep it hygienic Unscrew the top cap of the water bucket AQ 6 Unscrew the top cap of the water bucket 2 7 Empty the water bucket into a sink 8 Rinse the inside of the water bucket with Ea fresh water several times 3 Add some mild washing up liquid to the 9 Water imithe water hucket Screw the top cap tightly back onto the
24. liance e Do not use this appliance when you have used indoor smoke type insect repellents or in places with oily residues burning incense or chemical fumes e Do not use the appliance near gas appliances heating devices or fireplaces e Always unplug the appliance after use and before you clean it e Do not use the appliance in a room with major temperature changes as this may cause condensation inside the appliance e To prevent interference place the appliance at least 2m away from electrical appliances that use airborne radio waves such as I Vs radios and radio controlled clocks e When the appliance is not used for a long time bacteria may grow on the filters Check the filters after a long period of disuse If the filters are very dirty replace them see the chapter Replace the filters e The appliance is only intended for household use under normal operating conditions e Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures such as the bathroom toilet or kitchen e he appliance does not remove carbon monoxide CO or radon Rn It cannot be used a safety device in case of accidents with combustion processes and hazardous chemicals e Clean the water bucket every day to keep it clean m Caution e Only fill the water bucket with cold tap water Do not use ground water or hot water e Do not put any substance other than water in th
25. n L gt The purifier beeps twice and the fan speed light flashes to show the current sensitivity level of the air quality sensor O Afro a 5 O PILENT ER D W TT 6 A mm a 7 FR Fan speed light Sensitivity level SILENT extra sensitive sensitive standard 3 Press the SPEED button to adjust the sensitivity level of the air quality sensor L gt One of the SPEED lights SILENT or goes on to show the preferred sensitivity level of the air quality sensor O AUTO SDE 44 Press and hold the SPEED and HUMIDITY SET buttons again to confirm the setting Note e When you change the sensitivity the appliance automatically starts operating at the set sensitivity level whenever you switch on the appliance Change the fan speed Auto 1 Press the button to switch on the appliance o PURIFIER SF HUMIDIFIER O ii 2 Press the SPEED button to select AUTO mode lz UTO Aw ILENT Note e In auto mode you can set the desired humidity level 40 50 60 in your room see chapter Set the humidity level Manual You can manually select the desired fan speed which overrides the auto mode 1 Press the button to switch on the appliance PURIFIER TH HUMIDIFIER Dn ik 2 Press the SPEED button once or more times to select the desired fan speed AUTO SILENT or O AUTO E z3 SEN SILE
26. n remove the humidification filter tray 5 Mix the white vinegar Sml 100 ml acetic acid with an equal amount of tap water ee in a container that is large enough to soak the humidification filter in 2 Remove the water bucket from the Water Vinegar 3 Remove the humidification filter tray from the appliance Note e fthere are white deposits scale on the filter make sure that the side with the white deposits is immersed in the water 6 Let the humidification filter soak in the solution for one hour 7 Discard the water vinegar solution EN 23 8 Rinse the humidification filter under the tap to rinse away vinegar residues During rinsing turn the humidification filter so that both the front and back sides are rinsed Cleaning schedule Frequency Cleaning method Every day Rinse the water bucket Every Rinse the humidification filter week o o o Clean the humidification filter tray When Clean the pre filter the filter light D 5 flashes Descale the humidification filter with the vinegar water mixture D drip off the Every Clean the air quality sensor and rey ree ees month air humidity sensor with a dry cotton swab When Wipe the surface of the necessary appliance with a soft dry cloth 1 0 Put the humidification filter back into the humidification filter tray 24 EN 7 Replace the filters The filter lights B 9 0 B indicate which filter has to be replac
27. se inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly PHILIPS 2011 Koninklijke Philips Electronics N V All rights reserved 1 100 recycled paper 4222 248 54473 11495 CS 100 papier recycle
28. sync with the filter lifetime Note e Reset the appliance when it is plugged in and switched on e Only replace the respective filters when you see the respective filter lights flash e After replacing the filters the respective filter light still flashes or continuous on until you reset the filter lifetime counter After you have replaced the filter reset the filter time Put the plug in the power socket and switch on the appliance again PURIFIER ZAE HUMIDIFIER in 2 Press and hold the RESET button for two seconds O CLEAN W8 P E 0 8 REPLACE O 8 0 8 FILTER 0 8 TARA EN 31 10 Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance If you are unable to solve the problem with the information below contact the Consumer Care Center in your country Problem The appliance does not work The appliance does not work even though it is switched on The water bucket leaks The water level in the water bucket drops very quickly after empty the humidification filter tray do not see the current humidity indication change There are some white deposits on the humidification filter 32 EN Possible solution e The filter replacement light has been on continuously but you did not replace the corresponding filter it is now locked In this case replace the filter and reset the filter time e Make sure that
29. ti care filter into the pre filter from the pre filter 4 Note new multi care filter e Make sure that the side with two clips is pointing properly attached to the appliance towards you and that all hooks of the pre filter are 9 Toreattach the front panel mount the panel onto the top of the appliance first 1 Then gently place the panel against the body of the appliance 2 10 Reset the multi care filter lifetime see the chapter Reset the filter lifetime counter EN Place your fingers in the recesses of the side panels Replace the activated carbon filter and the HEPA filter 3 Gently pull the bottom of the panel out 1 then lift the top part of the front panel towards you 2 Note e The activated carbon and the HEPA filters are not washable nor vacuum cleanable Replace both the activated carbon filter and the HEPA filter when the filter light 8 8 flashes 2 0 CLEAN A REPLACE FILTER Tip e When you remove or insert filters place the appliance against a wall for more stability Kor 5 Remove all packaging material from the new filters Insert the filters in the correct position Make sure that you place the filters in the order of HEPA filter activated carbon filter multi care filter if available and finally the pre filter e Make sure that the side with the tag is pointing towards you Switch off the
Download Pdf Manuals
Related Search