Clover Technologies Group HDC560 surveillance camera
Contents
1. turn it clockwise to secure It can be used for wall mount or ceiling mount application depending on setting this pivot locking screw Loosen the locking screw with the provided hex head wrench and turn the camera clockwise or counter clockwise to upright images on the screen and turn it clockwise to secure Connect the one end of 100 cable supplied to the Din jack of 5 cable attached to the camera Make sure that two arrows on the top of them should be aimed at each other Connect the other end BNC or RCA of cable to the video devices such as dl od gt 4 DVR monitor TV Plug the provided AC adapter to the DC jack red of the end of 100 cable LILLILLLI LI LILILILILIDLI LILITEILILI LIE LLILI EI LILILTLILILILELILILIETI HOW TO ADJUST ANGLE OF VIEW 1 Vari focal lens Easily changeable angle of view 4 to 9mm 2 TOW Tele amp Wide Loosen the locking screw 3 with a driver not included and turn this adjustment ring 2 clockwise or counter clockwise to set the focal length Secure the locking screw 3 after setting 3 ooND Loosen the locking screw with a driver not included and turn this adjustment ring clockwise or counter clockwise to set the focus Secure the locking screw b after setting Note Apply the provided AC adapter only The total length of cable must not exceed 200 including extension cable TROUBLE SHOOTING If the camera does not function prope2. INSTRUCTION MANUAL DAY AND NIGHT COLOR CAMERA MODEL HDC560 bd CLOVER Electronics USA Copyright 2007 Clover Electronics U S A All Rights Reserved PRECAUTIONS To avoid electrical shock do not open the case of this product Operate this product using only the supplied AC Power supply Do not overload electrical outlets or extension cords this can result in fire or electric shock Keep this product away from strong magnetic fields Do not expose this product in direct sunlight or strong reflected rays Refer servicing to qualified personnel only Do not change or modify this product the warranty will be voided FEATURES Weatherproof IP67 1 3 Sony Super HAD CCD High Resolution 560 TV Lines Rugged Steel Construction Total 78 Infrared LEDs with a CDS sensor Up to 120 IR range depends on scene reflection DC Auto Iris Vari focal Lens 4 9mm Attached Universal Mounting Bracket and 100 cable DCI2V Power Source INSTALLATION Attach the mounting bracket base ring D to the wall or ceiling wherever you want to install the camera Locate a wall stud or ceiling joist and secure the bracket base ring using the supplied screws Attach the mounting bracket to the base ring and secure them using the supplied screws Lock the mounting bracket with the locking ring Turn the pivot locking screw 4 with the provided hex head wrench counter clockwise to set the desired angle of camera toward objects and
3. ideo Recorder DVR CAT100H 100 6pin Din Extension cable PACKAGE INCLUDES 1 Day amp Night Color Camera 1 100 6pin Din Cable 1 UL Approved AC Adapter 1 BNC to RCA Adapter Hardware Accessories Kit 1 Instruction Manual 1 Warranty Registration Card
4. rly check the following points before contacting the service center between the camera and a monitor monitor Check if the lens is stained If dirty clean it with soft and clean cloth The camera 1s not working properly and the surface of the camera case 1s hot provided AC adapter No video The contrast on the screen 1s too weak Adjust the contrast feature of the The image on the screen flickers monitor If the camera is exposed under too strong light change the position Does the camera face to directly to the sunlight or fluorescent light Change the camera position Picture rolls and jumps scrambled Improper V hold control Setting on your picture E URBEM Picture smaller than screen SPECIFICATIONS House current may House current may betoolow si too low e Image sensor 1 3 Sony Super HAD CCD 811H x 508V e Effective pixels 768H x 494V e Scanning system 525 lines 2 1 interlace e Horizontal resolution 560 TV lines e Shutter speed Auto Manual 1 60 to 1 120 000 sec e Sync System Internal e S N ratio more than 50db AGC off e Minimum illumination 0 01 Lux F1 2 e Video output Composite 1 0Vp p 275 Q e AGC Auto e Digital Noise Reduction Auto e White balance Auto e ens DC Auto Iris Vari focal Lens 4mm to 9mm e Current consumption 650mA Max DCISV e Power supply DC 15V 1 5A e Operating temperature 10 C to 50 C e Dimensions 930 x 230 L mm e Weight 2 9 Lbs LIMITED 2 YEAR WARRANTY This
5. warranty gives the original purchaser specific legal rights and you may also have other rights which vary from state to state If our products do not function because of any defect in material or workmanship we will repair free of charges for 2 years on parts and labor from the date of original purchase This warranty does not cover modification abuse incidental or consequential damages unless the state of owner s residence specially prohibits limitations on incidental or consequential damages HOW TO OBTAIN FACTORY SERVICE p Original purchaser must fill out a warranty card and mail it to the factory with model number serial number and the date of purchase 2 We will repair or replace and return to the owner the system under this limited warranty 3 Please pack the system carefully and securely using the original packing materials and send it prepaid and insured to 13073 E 166 St Cerritos CA 90703 4 Please include a check for 25 00 to cover the cost of return postage and handling If the system is returned within the warranty period please include a proof of purchase If the system is out of warranty you will receive an estimate of the repair cost for your approval before repair work will be begun AVAILABLE ACCESSORIES CDR4010 Stand alone 4 CH Digital Video Recorder DVR CDR4170 Stand alone 4 CH Digital Video Recorder DVR CDRI610 Stand alone 16 CH Digital Video Recorder DVR CDRO0850 Stand alone 8 CH Digital V
Download Pdf Manuals
Related Search