Clover Technologies Group HDC238 surveillance camera
Contents
1. INSTRUCTION MANUAL 3D DNR DAY NIGHT COLOR DOME CAMERA MODEL HDC238 gt 4 CLOVER Electronics USA Copyright 2009 Clover Electronics U S A All Rights Reserved PRECAUTIONS e To prevent fire or shock hazard do not expose the product to rain or moisture e To avoid electrical shock do not open the case of this product e Operate this product using only the recommended AC Power supply e Do not overload electrical outlets or extension cords this can result in fire or electric shock e Keep this product away from strong magnetic fields e Do not expose this product in direct sunlight or strong reflected rays e Refer servicing to qualified personnel only e Do not change or modify this product the warranty will be voided FEATURES e 1 3 Sony Super HAD CCD e High Resolution 550 TV Lines Color 600 TV Lines B W e Day Night Camera e On Screen Display OSD e 3D DNR Digital Noise Reduction with 3D filter e D WDR Digital Wide Dynamic Range e 3 Axis Gimbals Bracket e DC 12V Power Source INSTALLATION 1 In order to open the dome camera insert a suitable driver into the slot and twist the driver 2 Attach the base housing to the wall or ceiling wherever you want to install the camera Locate a wall stud or ceiling joist and secure the base housing using the supplied screws 3 How to set angle of view Loosen the locking screws and adjust the camera direction by turning the pan2. bracket left or right the tilt bracket up or down then fix the screws firmly Turn the camera body 6 clockwise or counter clockwise to upright images on the screen 4 If necessary change the settings to get the best images depending on your application by using the buttons on the rear of the camera refer to the instruction manual for OSD control 5 Assemble the dome cover by pushing back to the base housing 2 6 Connect the one end of BNC cable not supplied to the BNC F of 5 cable attached to the camera and the other end BNC of cable to the video devices such as DVR monitor TV Plug an AC power supply not supplied to the DC jack red on the camera 1 SLOT 1X15mm A P 2 BASE HOUSING 3 SCREW SCREW FOR TILTING 5 SCREW FOR PANNING 4 SCREW FOR TILTING SCREW FOR PANNING 6 CAMERA BODY 110mm 73mm ET OSD Menu Control Board FRONT SIDE Note Apply DC12V 250 mA regulated power supply not included To avoid fire or shock hazard use a UL listed power supply TROUBLE SHOOTING If the camera does not function properly check the following points before contacting the service center between the camera and a monitor monitor clean it with soft and clean cloth the surface of the camera case is hot provided AC adapter The contrast on the screen is too weak Adjust the contrast feature of the monitor If the camera is exposed under too strong light change the p
3. date of original purchase This warranty does not cover modification abuse incidental or consequential damages unless the state of owner s residence specially prohibits limitations on incidental or consequential damages HOW TO OBTAIN FACTORY SERVICE 1 Original purchaser must fill out a warranty card and mail it to the factory with model number serial number and the date of purchase 2 We will repair or replace and return to the owner the system under this limited watranty 3 Please pack the system carefully and securely using the original packing materials and send it prepaid and insured to 13073 E 166 St Cerritos CA 90703 4 Please include a check for 15 00 to cover the cost of return postage and handling If the system is returned within the warranty period please include a proof of purchase If the system is out of warranty you will receive an estimate of the repair cost for your approval before repair work will be begun AVAILABLE ACCESSORIES CDR0460 Stand alone 4 CH Digital Video Recorder DVR CDR4450 Stand alone 4 CH Digital Video Recorder DVR CDRO860 Stand alone 8 CH Digital Video Recorder DVR CDR1660 Stand alone 16 CH Digital Video Recorder DVR CDRO850 Stand alone 8 CH Digital Video Recorder DVR CDR1650 Stand alone 16 CH Digital Video Recorder DVR CA100BP 100 BNC Power to BNC Power Extension cable and coupler ADT120250 AC Power Supply DC12V 250 mA Regulated PACKAGE INCLUDES 1 Day amp Night C
4. olor Dome Camera 1 Hardware Accessories Kit 1 Instruction Manual 1 Instruction Manual for OSD Control 1 Warranty Registration Card
5. osition The image on the screen flickers Does the camera face to directly to the sunlight or fluorescent light Change the camera position Picture rolls and jumps scrambled Improper V hold control Setting on your picture monitor Picture smaller than screen House current may be too low SPECIFICATIONS Image sensor Total pixels Effective Pixels Scanning system O S D Backlight Resolution S N Y signal Min illumination White Balance Sense up 3 DNR D WDR D amp N selection Digital zoom Voltage Current consumption Lens Operating temperature Humidity Storage temperature Humidity Dimensions Weight 1 3 SONY Super HAD CCD 811 H x 508 V 768 H x 494 V 2 1 Interlace Available Off HSBLC BLC selectable S50TV Lines color 600TV Lines B W 52dB AGC Off Weight On 0 00001 Lux sense up x258 ATW AWB Manual AWC SET Off Auto Selectable limit x2 x258 Off On 1 50 level adjustable Indoor Outdoor Off Color BW Auto On x32 Off DC12V 130 mA DC12V 4 0mm fixed board lens 10 C 50 C RH 95 Max 20 C 60 C RH 95 Max 110 Q x 75 H mm 0 7 Lbs LIMITED 2 YEAR WARRANTY This warranty gives the original purchaser specific legal rights and you may also have other rights which vary from state to state If our products do not function because of any defect in material or workmanship we will repair free of charges for 2 years on parts and labor from the
Download Pdf Manuals
Related Search