Clover Technologies Group DC534 surveillance camera
Contents
1. and handling If the system is returned within the warranty period please include a proof of purchase If the system is out of warranty you will receive an estimate of the repair cost for your approval before repair work will be begun AVAILABLE ACCESSORIES CDR4450 Stand alone 4 CH Digital Video Recorder DVR CDR0460 Stand alone 4 CH Digital Video Recorder DVR CDR1650 Stand alone 16 CH Digital Video Recorder DVR CDRO0850 Stand alone 8 CH Digital Video Recorder DVR CA100BP 100 BNC DC Power Extension cable and coupler PACKAGE INCLUDES 1 True Day amp Night Color Camera 1 60 BNC DC Power Cable 1 UL Approved AC Adapter 1 BNC to RCA Adapter 1 Hardware Accessories Kit 1 Instruction Manual 1 Warranty Registration Card2. INSTRUCTION MANUAL ARMORED HIGH IMPACT COLOR DOME CAMERA MODEL DC534 E GLOVER Copyright 2009Clover Electronics U S A All Rights Reserved PRECAUTIONS To avoid electrical shock do not open the case of this product Operate this product using only the supplied AC Power supply Do not overload electrical outlets or extension cords this can result in fire or electric shock Keep this product away from strong magnetic fields Do not expose this product in direct sunlight or strong reflected rays Refer servicing to qualified personnel only Do not change or modify this product the warranty will be voided FEATURES Vandal Weather Resistant Dome Camera 1 3 Sony Super HAD CCD 420 TV Lines of Resolution Rugged Steel Construction Total 11 Infrared LEDs with a CDS sensor 30 IR range depends on scene reflection DC12V Power Source INSTALLATION e Ge gt Loosen the four locking screws with provided hex head wrench and remove the dome Loosen the two locking screws with a driver not included and then set the desired angle of camera toward objects by moving the camera up or down Attach the mounting base to the wall or ceiling wherever you want to install the camera Locate a wall stud or ceiling joist and secure the mounting base using the supplied screws Attach the dome to the mounting base with a camera and secure them turning the four locking screws with provided hex head wr
3. ench clockwise Connect the one end of 60 cable BNC DC plug to the BNC DC jack of 3 3 cable attached to the camera Connect the other end BNC DC jack of cable to the video devices such as DVR monitor TV Plug the provided AC adapter to the DC jack red D of the end of 60 cable Note Apply the provided AC adapter only TROUBLE SHOOTING If the camera does not function properly check the following points before contacting the service center No video Check the AC adapter and video cable between the camera and a monitor monitor Check if the lens is stained If dirty clean it with soft and clean cloth The camera is not working properly and Check if you have connected the the surface of the camera case 1s hot provided AC adapter The contrast on the screen is too weak The image on the screen flickers SPECIFICATIONS Adjust the contrast feature of the monitor If the camera is exposed under too strong light change the position Does the camera face to directly to the sunlight or fluorescent light Change the camera position Picture rolls and jumps scrambled Improper V hold control Setting on your picture monitor Picture smaller than screen House current may be too low Image pickup device Scanning system Horizontal resolution Electronic Shutter speed Sync System S N ratio Gamma characteristics Minimum illumination Video output Lens Housing material Dome material Curren
4. t consumption Power supply Operating temperature Dimensions Weight 1 3 Sony Super HAD CCD 510H x 492V 525 lines 2 1 interlace 520 TV lines 1 60 to 1 100 000 sec Internal more than 48db AGC off 0 45 0 1 Lux with LEDs Off Composite 1 0Vp p 75 Q 4 3mm fixed lens Die cast aluminum alloy Polycarbonate 250mA Max LED On DC 12V 500mA Regulated 10 C to 50 C 120 W x 120 D x 72 H mm 1 2Lbs LIMITED 2 YEAR WARRANTY This warranty gives the original purchaser specific legal rights and you may also have other rights which vary from state to state If our products do not function because of any defect in material or workmanship we will repair free of charges for 2 years on parts and labor from the date of original purchase This warranty does not cover modification abuse incidental or consequential damages unless the state of owner s residence specially prohibits limitations on incidental or consequential damages HOW TO OBTAIN FACTORY SERVICE Original purchaser must fill out a warranty card and mail it to the factory with model number serial number and the date of purchase 2 We will repair or replace and return to the owner the system under this limited watranty 3 Please pack the system carefully and securely using the original packing materials and send it prepaid and insured to 13073 E 166 St Cerritos CA 90703 4 Please include a check for 20 00 to cover the cost of return postage
Download Pdf Manuals
Related Search