CyberPower CPS320SL uninterruptible power supply (UPS)
Contents
1. PowerPanel is equipped with a Scheduled Shutdown feature which can automatically save and close open files and then shutdown the computer and UPS at a user specified date and time Use of this feature is optional and is not required for the power failure shutdown to occur The use of the PowerPanel software is optional The UPS unit will provide full surge suppression and battery backup without the software You must use the software if you wish to have the automatic shutdown feature POWERPANEL MAIN WINDOW DESCIPTION Minimize Button This button is used to minimize the software Power Button Clicking on the power button will stop the software Setup Button Click the setup button to open the Setup Window Log Button Click on the log button to open the Log Window Shutdown Button Click the shutdown button to open the Scheduled Shutdown Window Battery OK Indicator This indicator appears in a green color when AC power is normal and the unit and software are communicating AC Power Indicator This indicator appears in a green color when AC power in normal When the power fails the indicator will change to a red color with an X through it 8 Scheduled Shutdown If there is a shutdown scheduled within seven days the information will be displayed here The user can schedule a shutdown in the Scheduled Shutdown Window 9 Final Countdown When the final countdown timer reaches zero the software will begin shutting dow2. CAUTION To prevent the risk of fire or electric shock install in a temperature and humidity controlled indoor area free of conductive contaminants Please see specifications for acceptable temperature and humidity range CAUTION To reduce the risk of electric shock do not remove the cover except to service the battery No user serviceable parts inside except for battery CAUTION Hazardous live parts inside can be energized by the battery even when the AC input power is disconnected CAUTION UPS must be connected to an AC power outlet with fuse or circuit breaker protection Do not plug into an outlet that is not grounded If you need to de energize this equipment turn off and unplug the unit CAUTION To avoid electrical shock turn off the unit and unplug it from the AC power source before servicing the battery or installing a computer component DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT CyberPower Systems does not sell products for life support or medical applications DO NOT use in any circumstance that would affect operation or safety of any life support equipment or with any medical applications or patient care 2 DO NOT USE WITH OR NEAR AQUARIUMS To reduce the risk of fire or electric shock do not use with or near an aquarium Condensation from the aquarium can cause the unit to short out CPS320SL CPS375SL CPS500SL CPS575SL CPS650SL DESCRIPTION Guaranteed Uninterruptible Power System B
3. Power C The Power To Control the Power User Manual for CPS320SL CPS375SL CPS500SL CPS575SL CPS650SL and PowerPanel Software ADDITIONAL INSTALLATION TIPS CAN BE FOUND AT http www cyberpowersystems com faq_sl htm CyberPower TABLE OF CONTENTS CBSO TON soi s ccddevecescctsavencs seecusets 1 LED INGICAIOIS oc cccccceccensecccccessencansce cos 7 Determining Power Requirements 1 Troubleshooting Guide 8 Hardware Installation Guide 2 kde rnivcdecscaandecs vaasesesdncacs 8 Software Installation Guide 3 Battery Replacement Instructions 9 Software User Manual 4 Wara a ene 10 Thank you for purchasing a CyberPower Systems Product To enjoy all the features and benefits of this Uninterruptible Power System UPS please read and follow all installation and operation instructions completely This UPS is designed to provide guaranteed power protection for connected electronic equipment The accompanying PowerPanel software saves data closes open applications and automatically shuts down your computer system in an intelligent and orderly manner IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important safety instructions Please read and follow all instructions carefully during installation and operation of unit Read this manual thoroughly before attempting to unpack install or operate
4. be reduced to reflect all such other payments or sources of recovery CyberPower 320SL 30 000 00 CyberPower 375SL 35 000 00 CyberPower 500SL 40 000 00 CyberPower 575SL 45 000 00 CyberPower 650SL 100 000 00 If CyberPower replaces the Connected Equipment or pays to the Initial Customer the Agreed Damage Amount the Initial Customer shall transfer such item s to CyberPower without warranty by the Initial Customer but free of lien or other interest CONDITIONS COMMON TO THE LIMITED WARRANTY AND THE POWER CONTROL GUARANTEE The Limited Warranty and the Power Control Guarantee are the only and the exclusive express warranty of CyberPower with respect to the Product This exclusion of other express warranties applies to written and oral express warranties Any Implied Warranty of Merchantability or for Fitness for a Particular Purpose if applicable to the Product is limited in duration to the period of ownership by the Initial Customer This provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular Purpose that would not Otherwise apply to the Product NOTE Some States do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you LIMITATION THE LIMITED WARRANTY AND THE POWER CONTROL GUARANTEE DO NOT COVER The Limited Warranty and the Power Control Guarantee are intended to exclusive rights and remedies and replace any other rights to the extent allowe
5. of PowerPanel You can run either PowerPanel or the Windows 2000 UPS service but not both To Configure the Windows 2000 UPS Service 1 Click on Start point to Settings then Control Panel 2 Double click on Power Options 3 On the UPS Tab click Select 4 Inthe UPS Selection Dialog Box under Select Manufacturer select Generic 5 Under Select Model select Custom 6 On the UPS Tab click Configure 7 Set Power Fail On Battery to Negative 8 Set Low Battery to Negative 9 Set UPS Shutdown to Positive 10 Click OK Please note This service must be stopped in order to run PowerPanel To disable the service set the Manufacturer to None Please note You must be logged on as an administrator or a member of the administrator s group to make these changes Network policies may also prevent you from making these changes Please contact your network administrator for further assistance TESTING YOUR UPS SYSTEM Once you have set up your UPS system you may wish to test it Make sure that the UPS has been charged for at least 4 hours before performing this test If you are using PowerPanel 1 With your UPS and computer on open an application such as notepad 2 Enter some data into the application 3 Unplug the UPS from the AC outlet When a power failure occurs PowerPanel will appear on the screen The outlet and battery symbols will change to indicate a power failure The countdown timer will move to
6. out AA Phone IN Py Lh Wall Jack To protect a fax phone or modem connect a telephone cable from the wall jack outlet to the in jack of the UPS Connect a telephone cable from the out jack with the CPU icon to the modem port on your computer The out jack with the telephone icon can be used to protect a telephone or fax machine Circuit Breaker Plug in o Hp S is x a O sg ppi mala i Plug the UPS into a 2 pole 3 wire grounding receptacle wall outlet Make sure the wall branch outlet is protected by a fuse or circuit breaker and does not service equipment with large electrical demands e g refrigerator copier etc Avoid using extension cords If used the extension cord must be rated for 15 amps Depress the power switch to turn the unit on The power on indicator light will illuminate and the unit will beep once If an overload is detected an audible alarm will sound and the unit will emit one long beep To correct this turn the UPS off and unplug at least one piece of equipment from the battery power supplied outlets Wait 10 seconds Make sure the circuit breaker is depressed and then turn the UPS on Your UPS is equipped with an auto charge feature When the UPS is plugged into an AC outlet the battery will automatically recharge To maintain optimal battery charge leave the UPS plugged into an AC outlet at all times To store your UPS for an ext
7. profits business interruption loss of information or data EXCEPT FOR AND ONLY FOR the specific limited agreement of CYBERPOWER to provide certain warranty benefits regarding Connected Equipment under the CYBERPOWER Power Control Guarantee NOTE Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you 12 CPS320SL CPS375SL CPS500SL CPS575SL CPS650SL Guaranteed Uninterruptible Power System DO NOT USE FOR MEDICAL OR LIFE SUPPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES CyberPower does not sell the Products for use in high risk activities The Product is not designed or intended for use in hazardous environments requiring fail safe performance including the operation of nuclear facilities aircraft navigation or communication systems air traffic control weapons systems life support or medical applications or for use in any circumstance in which the failure of the Product could lead directly to death personal injury or severe physical or property damage or that would affect operation or safety of any medical or life support device collectively High Risk Activities CyberPower expressly disclaims any express or implied warranty of fitness for High Risk Activities CyberPower does not authorize use of any of its products use in any High Risk Activities ANY SUCH USE IS IMPROPER AND IS A MISUSE OF CYBERPOWER PRODUCTS T
8. CPS650SL 185W 210W 275W 320W 350W _Input Voltage on Utility Input Frequency 57 Hz to 63 Hz On Battery Output Voltage 120Vac 5 3 Outlets 185W 210W 275W 320W 350W Protection outlets 6 Outlets 32 F to 95 F 0 C to 35 C 0 to 95 NON CONDENSING 9 7 8 x 6 3 16 x 3 1 8 25 8cm x 15 9cm x 8 3cm UL1778 UPS CUL107 1 FCC DoC Class B CPS320SL CPS375SL CPSS500SL CPS575SL CPS650SL Guaranteed Uninterruptible Power System EXPECTED RUNTIME IN MINUTES Po EP SB20SL CPS375SL CPS500SL CPS575SL CPS650SL Desktop PC with 15 Monitr 6 9 8 12 10 14 17 21 18 24 Desktop PC with 17 Monitor 4 6 6 9 8 12 15 19 16 22 Desktop PC with 21 Monitor Not Advised Not Advised 13 17 14 19 REPLACING THE BATTERY CAUTION Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery Service the battery under the supervision of personnel knowledgeable of batteries and their precautions CAUTION Use only the specified type of battery See your dealer for replacement batteries CAUTION The battery may present risk of electrical shock Do not dispose of battery in a fire as it may explode Follow all local ordinances regarding proper disposal of batteries CAUTION Do not open or mutilate the batteries Released electrolyte is harmful to skin and eyes and may be toxic CAUTION A battery can present a high risk of short circuit current and electri
9. age to Connected Equipment is covered by the Power Control Guarantee CyberPower will in addition to Limited Warranty remedies for the CyberPower Product itself repair or pay the costs of repair or replace the Connected Equipment or at the option of CyberPower as permitted by law pay to the Initial Customer the Agreed Damage Amount up to the aggregate limits stated below for all item s of Initial Customer s Connected Equipment The Agreed Damage Amount for all items of Initial Customer s Connected Equipment shall be the lesser of the amount determined under Clause 1 or 2 below reduced by any amounts described in Clause 3 below 1 The fair market value of the Connected Equipment as established by the lower of a the average price the same or similar items are being sold for on eBay b the price list of the Boston Computer Exchange on the date of occurrence or if such price list is no longer published a published or announced price list reasonably selected by CyberPower or c the lowest price the Connected Equipment can be purchased for in the United States or 2 The aggregate ceiling amount for all Connected Equipment as set forth below minus 11 CyberPower 3 The amouni s of all payment you have or are entitled to receive from insurance other warranties extended warranties or from other sources or persons for the Connected Equipment or damage to such equipment so that CyberPower s maximum liability shall
10. ation about proper disposal and recycling of batteries CyberPower Limited Warranty And Power Control Guarantee In purchasing a 320SL 375SL 500SL 575SL or 650SL in the United States or Canada the original end user receives a Limited Warranty and CyberPower s Power Control Guarantee from Cyber Power Systems USA Inc for ease of reading referred to as CyberPower The Limited Warranty and the Power Control Guarantee are intended to be the initial end user s exclusive rights and remedies The Limited Warranty and the Power Control Guarantee are separate all though they are related Limited Warranty The original end user referred to as the Initial Customer receives an express limited warranty for the 320SL 375SL 500SL 575SL or 650SL referred to as the Limited Warranty purchased from CyberPower referred to as the Product The Limited Warranty is for the Product itself The terms of the Limited Warranty are explained below Power Control Guarantee CyberPower also provides the Initial Customer with protection in the event that the Product is not free from defects in materials and workmanship and certain equipment connected to the Product is damaged the Power Control Guarantee The Power Control Guarantee protects the Initial Customer for damage to equipment plugged into the Product The terms of the Power Control Guarantee are explained below The Limited Warranty and the Power Control Guarante
11. attery Surge Outlets Provides three battery powered surge outlets for connected equipment and insures temporary uninterrupted operation of your equipment during a power failure Full Time Surge Protection Outlets Provides three always on surge suppression outlets Power Switch Can be used as a mater on off switch for equipment connected to the battery power supplied outlets Electrical Wiring Fault Indicator This LED indicator will illuminate to warn the user that a wiring problem exists such as bad ground miss ground or reversed wiring If this is illuminated user is advised to disconnect all electrical equipment from the outlet and have an electrician check to ensure the outlet is properly wired Power On Indicator This LED is illuminated when the utility condition is normal and the UPS outlets are providing power free of surges and spikes Circuit Breaker Located on the side of the UPS the circuit breaker serves to provide overload and fault protection Under normal operating conditions the circuit breaker is depressed Serial Port to PC This port allows connection and communication from the DB 9 serial port on the computer to the UPS unit The UPS communicates its status to the PowerPanel software This interface is also compatible with the UPS service provided by Windows NT and Windows 2000 Communication Protection Ports Communication protection ports will protect any standard modem fax or tele
12. cal shock Take the following precautions before replacing the battery Remove all watches rings or other metal objects Only use tools with insulated handles Do not lay tools or metal parts on top of battery or any terminals Wear rubber gloves and boots Determine if the battery is inadvertently grounded If inadvertently grounded remove source of ground CONTACT WITH GROUNDED BATTERY CAN RESULT IN ELECTRICAL SHOCK The likelihood of such shock will be reduced if such grounds are removed during installation and maintenance applicable to a UPS and a remote battery supply not having a grounded circuit a a TO REPLACE THE BATTERY Turn off and unplug all connected equipment Turn the UPS off and unplug it from the AC power source Turn the UPS upside down Remove the 6 retaining screws Turn the UPS right side up and remove the outlet cover Remove the battery from the compartment Disconnect the battery wires from the battery Install the replacement battery by connecting the red wire to the positive terminal of the battery and connecting the black wire to the negative terminal of the battery 9 Slide the battery back into the compartment 10 Replace the outlet cover and the 6 retaining screws 11 Recharge the unit for 4 8 hours to ensure the UPS performs expected runtime SOC ONS REMINDER Batteries are consider HAZARDOUS WASTE and must be disposed of properly Contact your local government for more inform
13. d by law 1 As to CyberPower products the Limited Warranty does not cover or apply to Misuse modification operation or storage outside environmental limits for the Products in transit in shipment or in storage damage or deterioration improper operation or maintenance use with items or equipment not designed or intended for use with the Product 2 As to Connected Equipment the Power Control Guarantee covers only damage within the specific terms of the Power Control Guarantee to Connected Equipment and only up to the applicable aggregate ceiling amount The Power Control Guarantee does not cover damage to Connected Equipment or apply if the product has been operated in a failure mode or not in compliance with CyberPower operating instructions and manuals Or if the Connected Equipment has been operated in a failure mode or not in compliance with the instruction and manuals of its manufacturer vendor The Limited Warranty and the Power Control Guarantee Do Not Apply Unless The Initial Customer 1 Has properly connected the Product and the Connected Equipment to properly wired and grounded outlets power supplies including compliance with electrical and safety codes of most current National Electrical Code ANSI NFPA 70 without the use of any adaptors extension cords or other connectors 2 Has provided a suitable and proper environment for use and installation of the Product and Connected Equipment 3 Has properly installed and operate
14. d the CyberPower Product and Connected Equipment CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the Following 1 Loss of or damage to data records or software restoration of data or records or reinstallation of software 2 Damage from causes other than AC Power Line Transients spikes or Surges on properly installed grounded and code compliant 120 volt power lines in the United States and Canada transients surges or spikes on standard telephone land lines PBX telephone equipment lines or Base 10 100T Ethernet lines when properly installed and connected This exclusion applies for example to fluctuations in data transmission or reception by CATV or RF transmission or fluctuations or by transients in such transmission 3 Damage from any circumstance described as excluded above with respect to the Product 4 Damages from fire flood wind rain rising water or leakage or breakage of plumbing from abuse misuse or alteration of either the Product or the Connected Equipment Exclusion of Consequential and Other Damages The sole and exclusive remedies of the Initial Customer are those provided by the Limited Warranty and Power Control Guarantee CyberPower excludes any liability for personal injury under the Limited Warranty and Power Control Guarantee CyberPower excludes any liability for direct indirect special incidental or consequential damages whether for damage to or loss of property loss of
15. e are subject to the terms set forth below Additionally State or Provincial law may adjust the terms of the Limited Warranty or the Power Control Guarantee or the State or Province may impose additional obligations or additional implied warranties To the extent necessary to comply with those laws the terms of the Limited Warranty and the Power Control Guarantee should be read to adjust to those requirements only to the extent necessary to comply with such local law If you are an Initial Customer you are asked to read the following terms and conditions carefully before using the Product By using the Product you consent to be bound by and become a party to the Limited Warranty and Power Control Guarantee If you do not agree to the terms and conditions of the Limited Warranty and Power Control Guarantee you should return the Product for a full refund prior to using it REGISTRATION CyberPower requests that you complete and return the Warranty Registration Card enclosed with the Product or register the Product at its website www cyberpowersystems com to establish that you are the original end user consumer purchaser of the Product and therefore entitled coverage under the Limited Warranty and the Power Control Guarantee Registration is not required for Limited Warranty coverage but note if you do not complete a registration card you will be required to provide proof of purchase as described below to have the benefits of this Limited Warra
16. ended period cover it and store with the battery fully charged Recharge the battery every three months to insure battery life CPS320SL CPS375SL CPS500SL CPS575SL CPS650SL Guaranteed Uninterruptible Power System POWERPANEL SOFTWARE INSTALLATION GUIDE Note Use of the software is optional The UPS will provide surge suppression and battery backup without the software You must use the software if you wish to have the automatic shutdown feature FOR WINDOWS 95 98 Me 1 Turn the UPS off and unplug it 2 Connect the serial interface cable to the UPS and an open serial port on the back of the computer Note You must use the O ONDA MAW serial cable that was supplied with the unit Plug the UPS into an AC outlet turn the UPS on and then start your computer Click on Start point to Settings then click Control Panel Double click on Add Remove Programs Insert the software disk into the floppy drive Click Install Follow the on screen instructions Once the software is installed remove the floppy disk and restart your computer When your computer restarts the PowerPanel software will appear on your screen for a few seconds and then minimize It will appear as a blue and white battery icon located in the system tray near the clock PowerPanel Icon Aser COO gt SEAS 11 56AM FOR WINDOWS NT SS OOS SN Click on Start point to Settings then Control Panel Double click on the UPS Icon Remove
17. er 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help Any special accessories needed for compliance must be specified in the instruction CAUTION A shielded type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception It is essential that only the supplied power cord be used Use only shielded cables to connect I O devices to this equipment CAUTION Any changes or modifications not expressly approved by the guarantee of this device could void the user s authority to operate the equipment berPower The Power To Control the Power Cy For more information contact us at CyberPower Systems USA Inc 5555 12 Avenue East Suite 110 Shakopee MN 55379 Tel 952 403 9500 Fax 952 403 9500 Email sales cyberpowersystems com Web www cyberpowersystems com Entire contents copyright 2001 CyberPower Systems Inc All rights reserved Reproduction in whole or in part without permission is prohibited PowerPanel is a trademark of CyberPower Systems USA Inc
18. er System DEFINITIONS FOR ILLUMINATED LED INDICATORS FAE coy Utility Failure the Tay Fame UPS EG is providing power to battery power supplied outlets from its battery 9 OnO SE Beeps Utility Failure The UPS is providing Beeps battery power Rapid beeps indicate the unit will run out of power shortly Two Beeps System Overload Occurs when connected equipment exceeds the i rating of unit Turn the UPS off unplug at least one piece of equipment wait 10 seconds reset the circuit breaker and turn the unit on On Off Long Beep Battery Overload Occurs when connected equipment exceeds the rating of battery outlets of the unit Turn the UPS off unplug at least one piece of equipment from battery outlets wait 10 seconds reset the circuit breaker and turn the unit on On Off Electrical Wiring Fault This indicates a wiring problem with the AC outlet such as bad ground miss ground or reversed wiring User is advised to disconnect all electrical equipment from the outlet and have an electrician check the outlet to insure proper wiring wal Power On 0 Circuit Breaker AN Wiring Fault a Alarm CyberPower TROUBLESHOOTING Full time surge protection Circuit breaker has tripped Turn the UPS off and unplug at least one piece of outlets stop providing due to an overload equipment Wait 10 seconds reset the circuit power to equipment breaker by depressing the button and then turn the UPS on The UPS does not Batte
19. he Limited Warranty and the Power Control Guarantee are governed by the laws of the United States and the State of Minnesota without reference to conflict of law principles The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded Contact Information CyberPower s address is 5555 1 2 Ave East Suite 110 Shakopee MN 55379 and its phone number is 952 403 9500 CyberPower is the warrantor under this Limited Warranty You may also contact CyberPower on the Internet at www cyberoowersystems com 13 FCC Notice This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiv
20. he item s of your electronic equipment directly and properly connected to the product the Connected Equipment if that Connected Equipment is x damaged by AC power line transients spikes or surges on properly installed grounded and code compliant 120 volt power lines in the United States and Canada or by transients surges or spikes on standard telephone equipment lines or Base 10 100T Ethernet lines that are properly installed and connected a Power Disturbance and y is directly plugged into and properly connected to a CyberPower Product in its original condition which is properly operated when a Power Disturbance passes through the CyberPower Product and y 1 exhausts the protection capacity of the CyberPower Product or y 2 damages the CyberPower Product This provision sets out the only liability of any character of CyberPower for direct indirect special consequential and or incidental damages under our Limited Warranty applies only to Connected Equipment and all such Liability is limited to the Agreed Damage Amount To make a Warranty claim for damage to Connected Equipment under the Power Control Guarantee you must do the following 1 Complete and return the CyberPower Warranty Registration Card or provide reasonable proof for example a sales receipt that establishes you as the Initial Customer the original consumer purchaser of the Product within ten 10 days of the event for which you want to make a claim for wa
21. ipment and multiply this total by 6 to calculate actual requirements There are many factors that can effect the amount of power that your computer system will require The total load that you will be placing on the battery powered outlets should not exceed 80 of the unit s capacity 1 CyberPower HARDWARE INSTALLATION GUIDE 10 Your new UPS may be used immediately upon receipt However recharging the battery for at least four hours is recommended to insure that the battery s maximum charge capacity is achieved Charge loss may occur during shipping and storage To recharge the battery simply leave the unit plugged into an AC outlet The unit will charge in both the on as well as the off position If you wish to use the software connect the enclosed serial interface cable to the serial port on the UPS and an open serial port on the computer If you are not going to use the software you do not need to connect the cable With the UPS unit off and unplugged connect your computer monitor and any externally powered data storage device Zip drive Jazz drive Tape drive etc into the battery power supplied outlets Plug your peripheral equipment printer scanner speakers into the full time surge protection outlets DO NOT plug a laser printer copier space heater vacuum or other large electrical device into the UPS The power demands of these devices will overload and possibly damage the unit OUT E lt CPU p
22. lected item Cancel Shutdown This button is used to cancel the current shutdown Day Date and Time This is the area where you select the day date and time that you want the shutdown to occur Once you have selected it click the Add Button to add the item to the schedule Please note The use of the schedule is optional and will have no effect on the shutdown of your system during a power failure This feature is simply used if you want have your computer automatically shut down at a scheduled time USING THE WINDOWS NT UPS SERVICE If you are running Windows NT you may choose to use the Windows NT service instead of PowerPanel You can run either PowerPanel or the NT service but not both To Configure the Windows NT UPS Service A Or OT eh Click on Start point to Settings then Control Panel Double click the UPS Icon Select the COM port that the UPS is connected to Set the Power Failure Signal to Negative Set the Low Battery Signal to Negative Set the Remote UPS Shutdown Signal to Positive Click OK Please note This service must be stopped in order to use the PowerPanel software To stop the service remove the checkmark from 5 CyberPower Uninterruptible Power Supply is installed on Click OK Acknowledge the message that the UPS is in an unknown state and exit to the desktop USING THE WINDOWS 2000 UPS SERVICE If you are running Windows 2000 you may choose to run the Windows 2000 UPS service instead
23. mer is entitled to recover from other sources regarding the Connected Equipment including insurance other warranty or extended warranty coverage whether or not the Initial Customer makes a claim for recovery including but not limited to a claim under any applicable insurance other warranty or extended warranty The Power Control Guarantee is separate from the Limited Warranty but they are related The Limited Warranty does not cover Connected Equipment but as is explained below to be covered under the Power Control Guarantee the Connected Equipment must have been damaged due to a failure of the Product that is covered by the Limited Warranty The Connected Equipment must have been damaged due to a defect in materials or workmanship of the Product and the Product must still be covered by the Limited Warranty and the Initial Customer has made a valid claim for the Product under the Limited Warranty In the event of damage to the Connected Equipment your exclusive remedy and CyberPower s sole obligations are as follows for Connected Equipment If a the Product purchased and owned by you is defective in material or workmanship under the Limited Warranty or any applicable Implied Warranty b the Limited Warranty requirements have been met and c none of the limitations or exclusions on warranty coverage apply CyberPower will as CyberPower elects as permitted by law repair replace or pay the Agreed Damage Amount defined below for t
24. n the system This can be adjusted in the Setup Window we aa I POWERPANEL SETUP WINDOW UPS is installed on COMI UPS service Id Time between power failure and shutdown process joo oe Time between power failure and initial warning message po sec avo Delay between waming messages jo sec 1 Delay Between Warning Messages This setting determines the delay between the audible alarms 2 Time Between Power Failure and Initial Warning This setting determines the delay between when the power fails and the first audible alarm 5 6 7 CPS320SL CPS375SL CPS500SL CPS575SL CPS650SL Guaranteed Uninterruptible Power System Time Between Power Failure and Shutdown Process This user adjustable setting determines how long the UPS will run on battery before starting to shut down the system If this is not checked the unit will run on battery until the low battery condition is met 2 minutes of backup time remaining and then start the shutdown process If the low battery condition is met before this timer reaches zero the software will start the shutdown process UPS is Installed On This shows the current COM port that the UPS is using The port assigned to the UPS needs to be used exclusively for the PowerPanel software OK Button This button is used to exit the setup window and save any changes Cancel Button This button is used to exit the setup window without saving any changes About Button This bu
25. nty LIMITED WARRANTY CyberPower warrants to you the Initial Purchaser that the Product will be free from defects in material and workmanship for three years from the date of original purchase subject to the terms of this Limited Warranty To be covered you must still be the owner of the Product at the time of the failure that results in the claim made under this Limited Warranty Your exclusive remedy and CyberPower s sole obligations are as follows for the Product If a the CyberPower Product you purchased and still own is defective in material or workmanship under this Limited Warranty or any applicable warranty imposed by law and b all Limited Warranty requirements have been met CyberPower will repair or replace the Product if it proves to be defective in material or workmanship during the Warranty Period To make a Limited Warranty claim on a Product you must do the following 1 Complete and return the CyberPower Warranty Registration Card or provide reasonable proof of purchase for example a sales receipt that establishes you as the Initial Customer the original end user consumer purchaser of the Product and prove that the Product was purchased within three years of the event for which you want to make a claim for warranty service 2 Call CYBERPOWER at 952 403 9500 write to CYBERPOWER at 5555 12 Avenue East Suite 110 Shakopee MN 55379 or E Mail CYBERPOWER at tech cyberpowersystems com within ten 10 days of
26. phone line Outlets Designed for AC Adapters Allows six AC power adapter blocks to be plugged into the UPS without blocking adjacent outlets INSPECTION The box should contain the following 1 PowerPanel software floppy disk 1 serial interface cable DB 9 1 telephone communication cable 1 user manual 1 warranty registration card 1 UPS unit HOW TO DETERMINE THE POWER REQUIREMENTS OF YOUR EQUIPMENT 1 Make sure that the total Volt Amp VA requirements of your computer monitor and peripherals does not exceed 1440 VA 2 Insure that the equipment plugged into the three battery power supplied outlets does not exceed the UPS unit s rated capacity 320VA 185W for CPS3820SL 375VA 210W for CPS375SL 500VA 275W for CPS500SL 575VA 320W for CPS575SL and 650VA 350W for CPS650SL If rated unit capacities are exceeded an overload condition may occur and cause the UPS unit to shut down and the circuit breaker to trip 3 Ifthe power requirements of your equipment are listed in units other than Volt Amps VA convert Watts W or Amps A into VA by doing the calculations below Note The below equation only calculates the maximum amount of VA that the equipment can use not what is typically used by the equipment at any one time Users should expect usage requirements to be approximately 60 of below value TO ESTIMATE POWER REQUIREMENTS Watts W x 1 82 VA or Amps A x 120 VA Add the totals up for all pieces of equ
27. rranty service 2 Call CyberPower at 952 403 9500 or write to CyberPower at 5555 12 Avenue East Suite 110 Shakopee MN 55379 or E Mail CyberPower at tech cyberpowersystems com within ten 10 days of the event for which you want to make a claim for warranty service 3 When you call write or E Mail identify the Product the Purchase Date and the item s of Connected Equipment Have information on all applicable insurance or other resources of recovery payment that are available to the Initial Customer for the Connected Equipment and the name of the power utility supplier for the location of the Connected Equipment and request Return Material Authorization information from CyberPower 4 Pack and ship the Product to CyberPower and if requested by CyberPower the item s of Connected Equipment a repair cost estimate for the damage to the Connected Equipment and or a written statement of how the damage occurred as instructed in your Return Material Authorization Show the Return Material Authorization code on the shipping label or include it with the Product Initial Customer shall prepay all shipping costs and is responsible for packaging and shipment CyberPower will inspect and examine the Product and the item s of Connected Equipment or at CyberPower s election your written statement and repair cost estimate for those item s You must return the product for inspection If the Product is warranted under the Limited Warranty and the dam
28. ry not fully charged Recharge the battery by leaving the UPS plugged perform expected runtime in Battery is slightly worn Contact CyberPower Systems about replacement out batteries at tech cyberpowersystems com The UPS will not turn on The on off switch is Turn the UPS off Wait 10 seconds and then turn designed to prevent the UPS on damage by rapidly turning it off and on The unit is not connected The unit must be connected to a 110 120v 60Hz to an AC outlet outlet The battery is worn out Contact CyberPower Systems about replacement batteries at tech cyberpowersystems com Mechanical problem Contact CyberPower Systems at tech cyberpowersystems com PowerPanel is inactive The serial cable is not Connect the serial cable to the UPS unit and an all icons are gray connected open serial port on the back of the computer You must use the cable that came with the unit The serial cable is Check the back of the computer for an additional connected to the wrong serial port Move the cable to this port port The unit is not providing Shutdown your computer and turn the UPS off battery power Wait 10 seconds and turn the UPS back on This should reset the unit The serial cable is not the You must use the serial cable that was enclosed cable that was included with the unit for the software and unit to be able to with the UPS unit communicate SPECIFICATIONS po CPS320SL CPS375SL CPSSOOSL CPS575SL
29. the check mark from the box labeled UPS is installed on Click OK Acknowledge the message that the UPS is in an unknown state Exit to the desktop Shutdown your computer Turn the UPS off and unplug it Connect the serial interface cable to the UPS and an open serial port on the back of your computer Note You must use the cable that was supplied with the unit Plug the UPS into an AC outlet turn the UPS on and then start your computer Click on Start point to Settings then Control Panel Double click on Add Remove Programs Insert the software disk into the floppy drive Click Install Follow the on screen instructions Once the software is installed remove the floppy disk and restart your computer When your computer restarts the PowerPanel software will appear on your screen for a few seconds and then minimize It will appear as a blue and white battery icon located in the system tray near the clock PowerPanel Icon Aser e OO a SESASI 11 56AM FOR WINDOWS 2000 1 Click on Start point to Settings then Control Panel 2 Double click on Power Options 3 On the UPS Tab click Select 4 Inthe UPS Selection Dialog Box under Manufacturers click None 5 Exit to the desktop 6 Shutdown the computer 7 Turn the UPS off and unplug it 8 Connect the serial interface cable to the UPS and an open serial port on the back of your computer Note You must use the 10 11 12 cable that was supplied with
30. the event for which you want to make a claim for warranty service 3 When you call write or E Mail identify the Product the Purchase Date and request Return Material Authorization information from CyberPower 4 Pack and ship the Product to CyberPower as instructed in your Return Material Authorization Show the Return Material Authorization code on the shipping label or include it with the Product You must prepay all shipping costs and you are responsible for packaging and shipment CyberPower will inspect and examine the Product within ten 10 days of receipt If the Product is not as warranted CyberPower will repair or replace the Product and return it to you at CyberPower s expense or if CyberPower is unable to or decides not to repair or replace the Product if defective within a reasonable time CyberPower will refund to you the full purchase price you paid for the Product purchase receipt showing price paid is required 10 CPS320SL CPS375SL CPS500SL CPS575SL CPS650SL Guaranteed Uninterruptible Power System POWER CONTROL GUARANTEE If you are the Initial Purchaser and the Product is still covered by the Limited Warranty the Power Control Guarantee provides protection for damage to equipment connected to the Product Connected Equipment subject to certain terms and limitations The Power Control Guarantee is not first dollar coverage CyberPower s obligation is reduced by any amounts that Initial Custo
31. the unit Plug the UPS into an AC outlet turn the UPS on and then start your computer Click on Start point to Settings then Control Panel Double click on Add Remove Programs Insert the software disk into the floppy drive CyberPower 13 Click Install 14 Follow the on screen instructions 15 Once the software is installed remove the floppy disk and restart your computer When your computer restarts the PowerPanel software will appear on your screen for a few seconds and then minimize It will appear as a blue and white battery icon located in the system tray near the clock PowerPanel Icon Asur OS G4 ARET 11 536 AM POWERPANEL SOFTWARE USER MANUAL OVERVIEW PowerPanel version 2 03 or greater is designed for use with Windows 95 Windows 98 Windows Me Windows NT and Windows 2000 The latest version can be downloaded from www cyberpowersystems com downloads htm It works in conjunction with the UPS to provide full protection of valuable computer systems applications and data In the event of a power failure PowerPanel automatically saves and closes open files under auto assigned file names or existing files names after a software controlled delay The computer and UPS are automatically shutdown to conserve battery power Files with auto assigned names will be saved under C PCTemp where C is the name of your main hard drive Files that have previously been saved will be saved in their original location
32. tton will display information about the software as well as contact information POWERPANEL LOG WINDOW ees Function gt 2 Q Event Log Closed Application Information Fae 4 OK 1 Event 2001 02 27 14 40 PowerPanel start E Clear 5 Display Window This area displays either the Event Log or the Closed Application Information Event Log Select this option to view PowerPanel events such as program start program end power failure and low battery Closed Application Information Select this option to view the file names of applications that were saved by PowerPanel Please note If an application has an existing file name it will be saved under that file name and not appear in this window OK Button This button is used to exit the window Clear Button This button is used to clear the information in the selected log POWERPANEL SHUTDOWN WINDOW Se ee i oe Shut dovin o L 2 Special Setting Weekly Setting gt NOOA Date Month Day Year 3 ME E E a S E Weekday r Display Window Any schedule information will be displayed here Special Setting This option is used to schedule a shutdown at a specific date and time Weekly Setting This option is used to schedule a shutdown for a specific time and day of the week OK Button This button is used to exit the window Add Button This button is used to add an item to the schedule Clear Button This button is used to delete the se
33. wards zero When the timer reaches zero the software will begin to save and close any open applications The software will auto assign names to any files that have not been previously saved and then save the file to the PC Temp folder which is located in the root directory of your C drive where C is the name of your main hard drive Once all open files have been saved and closed PowerPanel will shutdown the operating system Once the operating system is shutdown the UPS will turn off within 90 seconds Wait until the UPS has turned off before plugging the UPS back into the outlet Once the test has been completed plug the UPS back into the wall and turn it back on You may then restart your computer Please allow 4 hours for the UPS to recharge before attempting another self test If you are NOT using PowerPanel Have your computer and UPS turned on Unplug the UPS from the wall to simulate a power failure The UPS will begin beeping indicating a power failure Save and close any open files Shut down the operating system Once the computer system is shutdown turn the UPS off oe po a As the battery discharges the unit will beep more rapidly indicating that the battery is nearing discharge Once the test is complete plug the UPS back in and start your computer Please allow 4 hours for the UPS to recharge before attempting another self test CPS320SL CPS375SL CPS500SL CPS575SL CPS650SL Guaranteed Uninterruptible Pow
Download Pdf Manuals
Related Search