Home

Samsung T27A300

1. The locking device has to be purchased separately 8D The location of the Kensington slot may be different depending on the TV model English 38 Other Information If you have any questions about the TV first refer to this list If none of these troubleshooting tips apply please visit www samsung com then click on Support or contact the call centre listed on the back cover of this manual Issues Picture Quality The TV image does not look as good as it did in the store The picture is distorted macroblock error small block dots pixelization There is poor colour or brightness There is a dotted line on the edge of the screen When changing channels the picture freezes or is distorted or delayed Sound Quality There is no sound or the sound is too low at maximum volume The picture is good but there is no sound The speakers are making an inappropriate noise No Picture No Video The TV will not turn on The TV turns off automatically Solutions and Explanations First of all please perform the Picture Test and confirm that your TV is properly displaying test image go to MENU Support Self Diagnosis Picture Test If the test image is properly displayed the poor picture may caused by the source or signal e f you have an analogue cable set top box upgrade to a digital set top box Use HDMI to deliver HD high definition picture quality e Cable Satellite subscribers Try HD sta
2. e Lean back mode Select when viewing from a slightly lower position e Standing Mode Select when viewing from the upper position M Mode Adjust screen viewing angle amp amp When Samsung MagicAngle is set to Lean back mode or Standing Mode Gamma is not available Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting options for picture quality control amp NOTE e n analogue TV Ext AV modes of the PAL system the Tint G R function is not available e When connecting a PC you can only make changes to Backlight Contrast Brightness and Sharpness e Settings can be adjusted and stored for each external device connected to the TV e Lowering picture brightness reduces power consumption Screen Adjustment Em Picture Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Sets the picture to 16 9 wide mode Wide Zoom Magnifies the picture size more than 4 3 amp Adjusts the Position by using a W buttons Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size SI Adjusts the Zoom or Position by using a w button 4 3 Sets the picture to basic 4 3 mode amp amp Do not watch in 4 3 format for a long time Traces of borders displayed on t
3. mosquitorepellent fragrance lubrication or cleansing agent when cleaning the product This may result in the exterior being deformed or the print being removed Since the exterior of the product is easily scratched be sure to use the supplied cleansing cloth Ad Warning 2 Since a high voltage runs through Na gt the product never disassemble repair or modify the product yourself SHA e Otherwise it may result in fire or electric shock e f the product needs to be fixed contact a service centre To move the product turn the power off and unplug the power cord the antenna cable and any other wires connected to the product e Otherwise it may result in electric shock or fire due to the damaged power cord Engish Z Getting Started If the product generates a strange noise a burning smell or smoke unplug the power plug immediately and contact a service centre e Otherwise it may result in electric shock or fire If you drop the product or the case is damaged turn the power off and unplug the power cord Contact a service centre e Otherwise it may result in fire or electric shock When thunder or lighting occurs unplug the power cord and under no circumstance touch the antenna cable as this is dangerous e Otherwise it may result in electric shock or fire Avoid moving the product by pulling the power cord or antenna cable e Otherwise
4. i L Re 0G ln CHLIST C NT Jas 7 Al previous Teletext page index Displays the index contents page at any time while you are viewing Teletext reveal Displays the hidden text answers to quiz games for example To display the normal screen press it again cancel Shrinks the Teletext display to overlap with the current broadcast Typical Teletext page and can be selected by pressing Part Contents the coloured buttons Press the o O BO A Selected page colour corresponding to the topic Aner moa oo A ue J L E B Broadcasting channel coded page is displayed Items daan can be selected in the same way Sehun To display the previous or next C Current page number page press the corresponding or search indications coloured button D Date and time mode Selects the Teletext y E Text mode LIST FLOF N VA F Status information If pressed during LIST mode switches the mode to List save mode In List save mode you can save a Teletext page into a list using the E8 store button sub page Displays the available sub page FASTEXT information English 36 Other Information Attaching a Wall Mount Desktop Stand Preparing before installing Wall Mount Desktop Stand 1 Turn the product off and unplug the power cord from the wall outlet 2 Place a sof
5. it may result in electric shock fire or a problem with the product due to damage to the cable Avoid lifting up or moving the product by holding only the power cord or signal cable e Otherwise it may result in electric shock fire or a problem with the product due to damage to the cable Take care not to block the vent by a table cloth or curtain e Otherwise it may result in fire due to internal overheating Avoid letting children hang or climb onto the product e Otherwise it may result in the product falling and this may result in injury or death Avoid placing objects such as toys and cookies on top of the product e fa child hangs over the product to grab an object the object or the product may fall and this may result in injury or even death Avoid dropping an object over the product or cause impact to the product e Otherwise it may result in electric shock or fire When a gas leak occurs do not touch the product or the power plug and ventilate immediately e Aspark may result in an explosion or fire e During a thunder or lighting storm do not touch the power cord or antenna cable Avoid using or placing inflammable spray or objects near the product e This may result in an explosion or fire Avoid inserting metal objects such as a chopsticks coins or hairpins or inflammable objects into the product the vents ports etc e f water or substances enters t
6. Contrast Off Low Medium High Adjust Straighten your back the screen contrast e Keep a distance of 45 50 cm 15 19 inches from your E Shadow Detail 2 2 Increase the brightness of dark eyes to the screen Look down at the screen and face images the screen forwards E Gamma Adjust the primary colour intensity e Adjust the angle of the product so that light is not reflected onto the screen E RGB Only Mode Off Red Green Blue Displays the Red Green and Blue colour for making fine e Keep your elbow at a right angle and keep your arm PY J J PY adjustments to the hue and saturation level with the back of your hand e Keep your elbow at a right angle mM Colour Space Auto Native Adjust the range of e Place your heels flat on the ground while keeping your colours available to create the image knees at an angle of 90 degrees or higher and maintain m White Balance Adjust the colour temperature for a the position of your arm so that your arm is below your more natural picture heart R Offset G Offset B Offset Adjust each colour s red green blue darkness a Changing the Picture Options R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to it s default settings Advanced Settings E Flesh Tone Emphasize pink Flesh Tone MENU M Picture Advanced Settings E Edge Enhancement Off On Emphasize object ENTERL boundaries
7. For more information refer to Channel Auto Tuning 7 Enjoy your TV Press the ENTER button If You Want to Reset This Feature Select System Plug amp Play Initial Setup Enter your 4 digit PIN number The default PIN number is 0 0 0 0 France 1 1 1 1 If you want to change the PIN number use the Change PIN function You should do Plug amp Play MENU System again at home although you did in shop EO If you forget the PIN code press the remote control buttons in the following sequence in Standby mode which resets the PIN to 0 0 0 0 France 1 1 1 1 POWER off MUTE 5 8 52 54 POWER on Engiss 14 Connections Connecting to an AV Device Using an HDMI or an HDMI to DVI cable up to 1080p Available devices DVD Blu ray player HD cable box HD STB Set Top Box satellite receiver VCR DVD Blu ray player DVD EEO Blu ray player amp HDMI IN 1 DVI 2 e f an HDMI to DVI cable is connected to the HDMI IN 1 DVI port the audio does not work e The picture may not display normally if at all or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV If such a problem occurs ask the manufacturer of the external device about the HDMI version and if out of date request an upgrade e Be sure to purchase a certified HDMI cable Otherwise the pic
8. f there is no power cut off switch the power consumption is O only when the power cord is disconnected e DPM Display Power Management Function does not work if you used in conjunction with the HDMI IN 1 DVI port of this product Engish 43 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care centre Country Customer Care Centre T Web Site ALBANIA 42 27 5755 AUSTRIA 0810 SAMSUNG 7267864 0 07 min www samsung com BELGIUM 02 201 24 18 www samsung com be Dutch www samsung com be_fr French BOSNIA 05 133 1999 BULGARIA 07001 33 11 www samsung com CROATIA 062 SAMSUNG 062 726 7864 www samsung com CZECH 800 SAMSUNG 800 726786 www samsung com Samsung Zrt Ceska organiza n slo ka Oasis Florenc Sokolovska394 17 180 00 Praha 8 DENMARK 70 70 19 70 www samsung com FINLAND 030 6227 515 www samsung com FRANCE 01 48 63 00 00 www samsung com GERMANY 01805 SAMSUNG 726 7864 0 14 Min www samsung com GREECE 2106293100 www samsung com HUNGARY 06 80 SAMSUNG 726 7864 www samsung com ITALIA 800 SAMSUNG 726 7864 www samsung com KOSOVO 381 0113216899 LUXEMBURG 261 03 710 www samsung com MACEDONIA 023 207 777 MONTENEGRO 020 405 888 NETHERLANDS 0900 SAMSUNG 0900 7267864 0 10 Min www samsung com NORWAY 815 56 480 www samsung com POLAND 0 801 1SAMSUNG 1
9. far away from any high voltage cables e f the antenna touches or falls onto a high voltage cable it may result in electric shock or fire Do not place the product face down on the floor e This may damage the panel of the product When putting the product down handle it gently e Otherwise it may result in a problem with the product or injury English 6 Getting Started E Cleaning Related AN Warning Before cleaning the product unplug the power cord e Otherwise it may result in electric shock or fire A Caution Avoid spraying cleansing agent directly onto the product e This may result in discoloration or cracking of the exterior of the product or the panel coming off If you can t get the product clean with just the supplied cloth use a soft damp cloth with a monitor exclusive cleansing agent and wipe the product with it e f no monitor exclusive cleansing agent is available dilute a cleansing agent with water at a ratio of 1 10 before cleaning the product Usage Related When cleaning the product do not spray water directly over the product parts e Make sure that water does not enter the product e Otherwise it may result in fire electric shock or a problem with the product When cleaning the product disconnect the power cord and clean the product with the supplied cleaning cloth e Avoid using chemicals such as wax benzene alcohol thinner
10. function the PIN input window appears Em Auto Tuning hir Cable Select the antenna source to memorise Digital amp Analogue Digital Analogue Select the channel source to memorise When selecting Cable Digital 4 Analogue or Digital Provide a value to scan for cable channels e Search Mode Full Network Quick Scans for all channels with active broadcast stations and stores them in the TV S If you select Quick you can set up the Network Network ID Frequency Modulation and Symbol Rate manually by pressing the button on the remote control e Network Auto Manual Selects the Network ID setting mode among Auto or Manual e Network ID When Network is Manual you can set up Network ID using the numeric buttons e Frequency Displays the frequency for the channel differs in each country e Modulation Displays available modulation values e Symbol Rate Displays available symbol rates Engish 21 Basic Features HM Cable Search Option depending on the country Sets additional search options such as the frequency and symbol rate for a cable network search Start Frequency Stop Frequency Set the start or stop frequency differs in each country Symbol Rate Displays available symbol rates Modulation Displays available modulation values Manual Tuning Scans for a channel manually and stores in the TV amp If a channel is locked using the Channel Lock function t
11. jack on the side of the TV 3 When USB is connected to the TV popup window appears Then you can select USB Drive New device connected S tt might not work properly with unlicenced multimedia files 3D Need to Know List before using My Downloads e MTP Media Transfer Protocol is not supported e The file system supports FAT16 FAT32 and NTFS e Certain types of USB Digital camera and audio devices may not be compatible with this TV e My Downloads only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported Devices should be connected directly to the TV s USB port e USB HDD is not supported e Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss e Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen e The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed If the files are sorted by Folder View up to 1000 files can be displayed in each folder e MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that
12. on the card e The location of the COMMON INTERFACE slot may be different depending on the model Cl or Cl CARD is not supported in some countries and regions check with your authorized dealer e f you have any problems please contact a service provider Insert the Cl or Cl CARD that supports the current antenna settings The screen will be distorted or will not be seen Connecting to a Audio device and PC an lg KSI Headphones 6 You can connect your headphones to the headphones output on your set While the headphones are connected the sound from the built in speakers will be disabled Using a Headphone Connection e Sound function may be restricted when connecting headphones to the TV e Headphone volume and TV volume are adjusted separately Engish LO Connections Using an HDMI cable or an HDMI to DVI cable D Connecting through the HDMI cable may not be supported depending on the PC F BaRa saa ae 1 0v HEHE JO Display Modes HDMI to DVI Input Optimal resolution 1920 X 1080 pixels Mode Resolution Horizontal Pixel Clock Vertical Frequency Frequency H2 MHz Frequency KHz IBM 640 x 350 70Hz 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 640 x 480 31 469 59 940 25 175 640 x 48
13. or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and
14. plug to cut the power off completely You cannot cut the power off completely using only the power button on the product AN Warning Avoid placing burning candles mosquitorepellentor cigarettes on the product e Otherwise it may result in fire Avoid installing the product in a badly ventilated location such as inside a bookshelf or closet e Otherwise it may result in fire due to internal over heating Avoid installing the product in a location that is unstable or exposed to excessive vibration such as on an unstable or slanted shelf e The product may fall and this may result in damage to the product or injury e f you use the product in a location exposed to excessive vibrations it may result in a problem with the product or fire Ask an installation engineer or relevant company to install the product onto the wall e Otherwise it may result in injury e Make sure to use the specified wall mount Keep the plastic bags used to pack the product away from children e f children place the plastic bags over their heads they may suffocate Avoid installing the product in a location exposed to dust moisture sauna oil smoke or water rain drops and installing it within a vehicle e This may result in electric shock or fire Engish 5 Getting Started Avoid installing the product in a location exposed to dire
15. the Plug amp Play Initial setup procedure Press the SOURCE button to select TV mode and go to MENU System Plug amp Play Initial setup ENTERC Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use If mounting the TV to the wall we recommend using cables with 90 degree connectors This is part of the product s design and is not a defect Engish 40 Other Information Issues Solutions and Explanations The PIP menu is not available e PIP functionality is only available when you are using a HDMI source You turned the TV off 45 minutes ago and e Itis normal The TV operates the OTA Over The Aerial function itself to upgrade firmware it turned on again downloaded whilst your watching TV The message Scramble signal or Weak e If you are using a CAM CARD CI Cl check that it is installed into the common interface slot Signal No Signal appears e fthere is still a problem pull the CAM CARD out of the TV and insert it into the slot again There are recurrent picture sound issues e Check and change the signal source A reaction may occur between the rubber e To prevent this use felt pads on any surface of the TV that comes in direct contact with furniture cushion pads on the base stand and the top finish of some furniture S This panel uses a panel consisting of sub pixels
16. the setting Returns to the previous menu These buttons are for the Channel List Channel Manager My Downloads menu etc T SOURCE POWER MUTE CHLIST em fag E RS LL a S58 E MANUAL ADISUBT SAMSUNG Ex Installing batteries Battery size AAA Displays and selects the available video sources Returns to the previous channel Changes channels Displays channel lists on the screen Displays the EPG Electronic Programme Guide Displays information on the TV screen Exits the menu E MANUAL Not Available P SIZE Selects the Picture Size AD SUBT Turns the audio description on and off not available in some locations Displays digital subtitles Engish 13 Connections Connecting to an Antenna When the TV is initially powered on basic settings proceed automatically O Preset Connecting the mains and antenna ANT OUT Power Input Plug amp Play Initial Setup When the TV is initially powered on a Sequence of on screen prompts will assist in configuring basic settings Press the POWER Q button Plug 4 Play is available only when the Input Source is set to TV 3D Before turning on the TV make sure the antenna cable is connected O To return to the previous step press the Red button 1 Selecting a language Press the A or V button then press the ENTER
17. to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system English 42 Other Information Gbaratih Temperature 50 F 104 F 10 C 40 C Environmental palan Humidity 10 96 80 96 non condensing considerations Guan Temperature 4 F 113 F 20 C 45 C J Humidity 5 95 non condensing Tilt 1 1 20 1 Analogue B G D K L Depending on your country selection Digital DVB T DVB C Analogue PAL SECAM NTSC 4 43 NTSC 3 58 PALGO Digital MPEG 2 MP ML MPEG 4 H 264 AVC MP L3 MP L4 0 HP L4 0 Sound System BG DK L NICAM MPEG1 DD DD HEAAC Video 1080 24p 1080p 1080i 720p 576p 480p TV System Colour Video System GEN Audio 2Ch Linear PCM 32 44 1 48kHz 16 20 24bits Model Name T22A300 T27A300 Screen Size Diagonal 21 5 inches 54 cm 27 inches 68 cm Display Resolution 1920 x 1080 60Hz Sound Outou TEE Dimensions Without Stand 507 0 x 314 5 x 47 5 mm 642 1 x 392 3 x 44 2 mm WxHxD With Stand 507 0 x 394 0 x 197 0 mm 642 1 x 473 7 x 217 3 mm Without Stand 3 9 kg 5 04 kg Weight With Stand 4 3 kg 5 54 kg NOTE e Design and specifications are subject to change without prior notice e For information about power supply and more about power consumption refer to the label attached to the product e Some models may not be available for purchase depending on the region e
18. which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product skrhk a Storage and Maintenance S if you attched some stickers on the TV screen it remains some debris after removing the sticker Please clean it to watch TV Do not spray water or a cleaning agent directly onto the Clean the product with a soft cloth dapped in a small amount product Any liquid that goes into the product may cause a of water failure fire or electric shock N CAUTION If the height of on one side is different from the other side adjust the heights Engish 44 Other Information a Licence S S5 TheaterSound SRS and the symbol are trademarks of SRS Labs Inc TheaterSound Q DOLBY TheaterSound technology is incorporated under licence from SRS Labs Inc Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are DIGITAL PLUS trademarks of Dolby Laboratories PULSE Open source licence notice In the case of using open source software Open Source licence are available on the product menu Open Source Licence Notice is written only English WEEE Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories
19. your hearing When replacing the batteries insert them with right polarity e Otherwise the battery may become damaged or it may cause fire personal injury or damage due to leakage of the internal liquid The batteries and rechargeable batteries are not ordinary refuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for recycling e The customer can return used or rechargeable batteries to a nearby public recycling centre or to a store selling the same type of the battery or rechargeable battery Engish LO Getting Started O Please make sure the following items are included with your TV If any items are missing contact your dealer amp The items colours and shapes may vary depending on the models amp Cables not included in the package contents can be purchased separately amp Check that there is no accessory hidden behind packing materials when you open the box N CAUTION INSERT SECURELY LEST SHOULD BE DETACHED IN SET e Remote Control amp Batteries AAA x 2 e Cleaning Cloth e Warranty Card Safety Guide Not available in some locations e Power Cord e Stand Connector Screws 4ea e Stand Base e User Manual e Quick Setup Guide e Cable Holder e HDMI DVI Cable Engish LA Getting Started The product colour and shape may vary depending on the model Control Panel SAMSUNG Power Indicator Bl
20. 0 37 861 72 809 31 500 640 x 480 37 500 75 000 31 500 800 x 600 35 156 56 250 36 000 VESA DMT 800 x 600 37 879 60 317 40 000 800 x 600 800 x 600 1024 x 768 1024 x 768 MAC VESA DMT 1280 x 1024 79 976 75 025 135 000 amp NOTE For PC connection you must use the HDMI IN 1 DVI jack The interlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported SOG Sync On Green is not supported PC D Sub input is not supported Sync Polarity H V Engish 17 Connections Source M SOURCE Source SOURCE Use to select TV or an external input sources such as a DVD Blu ray player cable box STB satellite receiver E TV Ext HDMI1 DVI HDMI2 USB amp In the Source connected inputs will be highlighted ON TV and Ext always stay activated Basic Features How to Navigate Menus Before using the TV follow the steps below to learn how to navigate the menu and select and adjust different functions ENTERC Direction button Move the cursor and select an item Confirm the setting RETURN button Returns to the previous menu MENU button Displays the main on screen menu ood EXIT button Exits the on screen menu Edit Name SOURCE TOOLS Edit Name gt ENTER C In the Source press the TOOLS button and then you can set an external input sou
21. 72678 022 607 93 33 www samsung com PORTUGAL 80820 SAMSUNG 726 7864 www samsung com RUMANIA 08010 SAMSUNG 08010 7267864 doar din re eaua www samsung com Romtelecom tarif local 021 206 01 10 din orice retea tarif normal SERBIA 0700 SAMSUNG 0700 726 7864 www samsung com SLOVAKIA 0800 SAMSUNG 0800 726 786 www samsung com sk SPAIN 902 1 SAMSUNG 902 172 678 www samsung com SWEDEN 0771 726 7864 SAMSUNG www samsung com SWITZERLAND 0848 SAMSUNG 7267864 CHF 0 08 min http www samsung com ch http www samsung com ch_fr French U K 0330 SAMSUNG 7267864 www samsung com EIRE 0818 717100 www samsung com LITHUANIA 8 800 77777 www samsung com LATVIA 8000 7267 www samsung com ESTONIA 800 7267 www samsung com TURKEY 444 77 11 www samsung com RUSSIA 8 800 555 55 55 www samsung com GEORGIA 8 800 555 555 ARMENIA 0 800 05 555 AZERBAIJAN 088 55 55 555 KAZAKHSTAN 8 10 800 500 55 500 GSM 7799 www samsung com UZBEKISTAN 8 10 800 500 55 500 www samsung com KYRGYZSTAN 00 800 500 55 500 www samsung com TADJIKISTAN 8 10 800 500 55 500 www samsung com UKRAINE 0 800 502 000 www samsung com ua www samsung com ua_ru BELARUS 810 800 500 55 500 MOLDOVA 00 800 500 55 500 2011 Samsung Electronics Co Ltd All rights reserved BN46 00161A 01
22. Advanced Settings are available in Standard Movie E Motion Lighting Off On Reduce power consumption mode by brightness control Compared to previous models new Samsung TVs have a more precise picture When connecting a PC you can only make changes to Gamma and White Balance English 24 Basic Features Picture Options MENU M Picture Picture Options ENTER L When connecting a PC you can only make changes to the Colour Tone Picture Options Colour Tone Warm2 Digital Noise Filter Auto MPEG Noise Filter Auto HDMI Black Level Normal Film Mode Off Move C Enter 5 Return Colour Tone Cool Standard Warm1 Warm2 amp Warm1 or Warm will be deactivated when the picture mode is Dynamic D Settings can be adjusted and stored for each external device connected to an input on the TV E Digital Noise Filter Off Low Medium High Auto Auto Visualisation If the broadcast signal received by your TV is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen Si When the signal is weak try other options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength D Only available for analogue channels amp When bar is green you are receiving the best possible signal E MPEG Noise Filter Off Low Medium High Auto Reduces MPE
23. C button Select the desired OSD On Screen Display language 2 Selecting Store Demo Press the lt or B button then press the ENTER C4 button or Home Use e Select the Home Use mode Store Demo Mode is for retail environments e To return the unit s settings from Store Demo to Home Use standard Press the volume button on the TV When you see the volume OSD press and hold MENU for 5 sec e Store Demo is only for shop display If you select it several functions are not able to use Please select Home Use when you watch at home 3 Selecting a country Press the or w button then press the ENTER LC button Select the appropriate Depending on the country country O After selecting the country in the Country menu some models may proceed with an additional option to setup the pin number When you input the PIN number 0 0 0 0 is not available 4 Setting the Set the Clock Mode automatically or manually Clock Mode e Auto Select the time zone depending on the country where you are located e Manual Allows you to manually set the current date and time 5 Selecting an antenna Press the A or V button then press the ENTER C button Select the Antenna source to memorise 6 Selecting a channel Press the A or V button then press the ENTER C button Select the channel source to memorise When setting the antenna source to Cable a step appears allowing you to assign numerical values channel frequencies to the channels
24. Cables 38 Anti theft Kensington Lock 39 Troubleshooting 43 Specifications Check the Symbol Q This function can be used by Step by Step Guide pressing the TOOLS button on the remote control English 3 Getting Started Icons used for safety precautions Failing to follow the precautions marked with this sign may result in a serious injury or A WARNING even a fatality Failing to follow the precautions marked with this sign may result in a personal injury or AN CAUTION property damage S Do not perform Must be followed This symbol indicates that high voltage is CAUTION present inside It is dangerous to make any kind RISK OF ELECTRIC SHOCK DO NOT OPEN of contact with any internal part of this product CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE This symbol alerts you that important literature COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE l l h REFER ALL SERVICING TO QUALIFIED PERSONNEL concerning operation and maintenance has been included with this product Power Related The following images are for your reference and may differ depending on models and countries A Warning Avoid using a damaged power Avoid connecting multiple electric cord or plug or a loose power appliances to a single wall outlet outlet e Otherwise it may result in fire e Otherwise it may result in due to overheating of the wall electric shock or fire outlet Avoi
25. G noise to provide improved picture quality E HDMI Black Level Low Normal Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals E Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality DT Available in TV mode EXT and HDMI 10801 3D If the screen does not seem natural change its option to Off Auto1 Auto2 in Film Mode Reset Picture OK Cancel Resets your current picture mode to its default settings E Changing the Preset Sound Mode MENU I Sound Sound Mode gt ENTER C Sound Mode M Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired E Adjusting Sound Settings Sound Effect MENU I Sound Sound Effect gt ENTER CY standard sound mode only E SRS TruSurround HD Off On This function provides a virtual 5 1 channel surround sound experience through a pair of speakers using HRTF Head Related Transfer Function technology E SRS TruDialog Off On This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clea
26. I System Eco Solution gt ENTER C Eco Solution E Energy Saving Off Low Medium High Picture Off TIED This adjusts the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button except volume button to turn on the screen E No Signal Power Off Off 15 min 30 min 60 min To avoid unnecessary energy consumption set how long you want the TV to remain on if it s not receiving a signal amp amp Disabled when the PC is in power saving mode Em Auto Power Off Off On Saves power by turning TV off automatically when no user operation is received for 4 hours E Other Features MENU I System gt ENTER Language E Menu Language Set the menu language M Teletext Language Set a desired language for teletext SI English is the default in cases where the selected language is unavailable in the broadcast E Preference Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Primary Teletext Language Secondary Teletext Language Select a language which will be the default language when a channel is selected English 28 Basic Features Subtitle Use this menu to set the Subtitle mode E Subtitle Off On Switches subtitles on or off E Subtitle Mode Normal Hearing Impaired Sets the subtitle mode Em Subtitle Language S
27. S button and select Play Selected Contents D You can select or deselect all music pressing the Select All Deselect All Photos Viewing a Photo or Slide Show 1 Press the a bd d i gt button to select the desired photo Normal Image Filename jpg 1024x768 2011 01 01 in the file list 2 Press the ENTER C button When a selected photo is displayed press the ENTERL button to start the slide show During the slide show all files in the file list will be displayed in order Music files can be automatically played during the Slide Show if the Background Music is set to On The Background Music cannot be changed until the BGM has finished loading C Pause lt p gt Previous Next 4 Tools 9 Return English 34 Advanced reatures a My Downloads Additional Functions Music Photos Play Option menu During playing a file press the TOOLS button Start Slide Show You can start or pause a Slide Show Pause Slide Show Slide Show Speed You can select the slide show speed during the slide show P Background Music You can on off background music when watching a Slide Show Ba Background Music You can select background music when watching a Slide Show Ha Setting Zoom You can zoom into images in full screen mode ma Rotate You can rotate images in full screen mode SG Information You can see detailed information about the played file EE lt I lt I lt lt I lt I lt Engish 35 Other Informat
28. SyncMaster imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register rams Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Digital TV notice 1 Functionalities related to Digital TV DVB are only available in countries areas where DVB T MPEG2 and MPEG4 AVC digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB C MPEG2 and MPEG4 AAC cable TV service Please check with your local dealer the possibility to receive DVB T or DVB C signal 2 DVB T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB C is that for the broadcast transmission of digital TV over cable 3 Although this TV set meets the latest DVB T and DVB C standards as of August 2008 the compatibility with future DVB T digital terrestrial and DVB C digital cable broadcasts cannot be guaranteed 4 Depending on the countries areas where this TV set is used some cable TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business 5 Some Digital TV functions might be unavailable in some countries or regions and DVB C might not work correctly with som
29. an set up the day you want to activate the timer The v mark indicates the day you ve selected On Time Set the hour and minute Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select ATV or DTV Channel when the Source is set to TV Select the desired channel Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically amp NOTE e f there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly e When there is only one photo file in the USB the Slide Show will not play e f a folder name is too long the folder cannot be selected e Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names e t is recommended that you use a USB memory stick and a multi card reader when using On Timer e The On Timer function may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because these devices take a long time to be recognized English 27 Basic Features E Off Timer 1 Off Timer 2 Off Timer 3 Three
30. arriage Channel View All Today 18 00 18 30 19 00 Discovery American Chopper Tine Team DiscoveryH amp L Programmes resume at 06 00 five Home and No Information Fiv e Dark Angel price drop tv No Information QVC QVC Selection R4DTT No Information Sche Mgr 24 Hours 24 Hours Ch Mode Information Page Ce Watch e The displayed image may differ depending on the model e EX Red Sche Mgr Displays the Schedule Manager e E Green 24 Hours Viewing the list of programmes to be broadcasted before 24 hours e Yellow 24 Hours Viewing the list of programmes to be broadcasted after 24 hours e Pp Blue Ch Mode Select the type of channels you want to display on the Channel View window e Information Displays details of the selected programme e gt Page Move to next or previous page e 4 Watch Schedule When selecting the current programme you can watch the selected programme When selecting the future programme you can reserve to watch the selected programme To cancel the schedule press the ENTERL button again and select Cancel Schedules Schedule Manager CONTENT Watch TV Schedule Manager gt ENTER Q You can view modify or delete a channel you have reserved to watch Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time Set the current time first to use this function 1 Press the ENTERL button to select Sch
31. ct sunlight and installing the product near a heat source such as a fireplace or heater e This may shorten the product life cycle or cause fire Bend the outdoor antenna cable downwards at the location where it comes in the house so that rainwater does not flow in e f rainwater enters the product it may result in electric shock or fire Do not let the product drop while moving it e This may result in a problem with the product or injury When installing the product on a console or shelf make sure that the front of the product does not protrude out of the console or shelf e Otherwise this may cause the product to fall off and result in a malfunction or injury e Make sure to use a cabinet or shelf suitable to the size of the product If the product is installed in a location where the operating conditions vary considerably a serious quality problem may occur due to the surrounding environment In this case install the product only after consulting one of our service engineers about the matter e Places exposed to microscopic dust chemicals too high or low temperature high humidity airports or stations where the product is continuously used Avoid installing the product where children may reach it e fa child touches the product the product may fall and this may result in injury e Since the front part is heavier install the product on a flat and stable surface Install the antenna
32. d plugging in or unplugging Plug the power plug in firmly lee the power supply with wet hands e Otherwise it may result in fire e Otherwise it may result in electric shock Make sure to connect the power Avoid bending or twisting the power cord to a grounded wall outlet for cord excessively and avoid placing insulation class 1 equipment only heavy objects on the cord e Otherwise it may result in e Otherwise it may result in electric shock or injury electric shock or fire due to a damaged power cord English A4 Getting Started Keep the power cord and the product away from a heater e Otherwise it may result in electric shock or fire Avoid unplugging the power plug while the product is operating e Otherwise it may damage the product due to electric shock When unplugging the power plug from the wall outlet make sure to hold it by the plug and not by the cord e Otherwise it may result in electric shock or fire Installation Related If the pins of the power plug or the wall outlet are covered in dust clean it using a dry cloth e Otherwise it may result in fire Make sure to use only the power cord supplied by our company In addition do not use the power cord of another electric appliance e Otherwise it may result in electric shock or fire Connect the power plug to a wall outlet that can be easily reached e When a problem occurs with the product you must unplug the power
33. different off timer settings can be made You must set the clock first Off Timer 1 Off Time lt gt Move Adjust 4 Enter DS Return Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day you ve selected Off Time Set the hour and minute E Locking Programmes MENU I System Security gt ENTER Security Sy The PIN input screen appears before the setup screen Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option E Channel Lock Off On Lock channels in Channel Manager to prevent unauthorized users such as children from watching unsuitable programme DT Available only when the input Source is set to TV E Program Rating Lock depending on the country Prevent unauthorized users such as children from watching unsuitable programme with a user defined 4 digit PIN code If selected channel is locked the f symbol will be displayed The items of Program Rating Lock differs depending on the country E Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them Change your personal ID number required to set up the TV Re enter the same 4 digits When the Confirm screen disappears your PIN has been memorised E Economical Solutions MENU
34. e PIP function Channel Select the channel for the sub screen Size m Select a size for the sub picture Position L_ C7 F_ EJ Select a position for the sub picture Sound Select Main Sub You can choose the desired sound Main Sub in PIP mode Support Menu MENU II Support ENTER C Self Diagnosis W Self Diagnosis might take few seconds this is part of the normal operation of the TV E Picture Test Yes No Use to check for picture problems Yes If the test pattern does not appear or there is noise in the test pattern select Yes There may be a problem with the TV Contact Samsung s Call Centre for assistance No If the test pattern is properly displayed select No There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual E Sound Test Yes No Use the built in melody sound to check for sound problems Yes If you can hear sound only from one speaker or not at all during the sound test select Yes There may be a problem with the TV Contact Samsung s Call Centre for assistance No If you can hear sound from the speakers select No There may be a problem with your external equipment Please check your connections If the problem persists refer to the external device s user manual E Signal Information digital channels only An HD channel s reception quality is either perfect
35. e cable service providers 6 For more information please contact your local Samsung customer care centre amp The reception quality of TV may be affected due to differences in broadcasting method between the countries Please check the TV performance in the local SAMSUNG Authorized Dealer or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not Still image warning Avoid displaying still images like jpeg picture files or still image element like TV programme logo panorama or 4 3 image format stock or news bar at screen bottom etc on the screen Constant displaying of still picture can cause ghosting of screen which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try do display any image on full screen use TV set picture format menu for best possible match e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout refer to proper user manual section for details Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature o
36. e tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner amp To reset the fine tuning select Reset Transfer Channel List The PIN input screen appears Enter your 4 digit PIN number Imports or exports the channel map You should connect a USB storage to use this function E Import from USB Import channel list from USB E Export to USB Export channel list to USB This function is available when USB is connected i Changing the Preset Picture Mode MENU I Picture Picture Mode gt ENTER C Picture Mode Select your preferred picture type amp When connecting a PC the Picture Mode is only available the Standard and Entertain Dynamic Suitable for a bright room Standard Suitable for a normal environment Movie Suitable for watching movies in a dark room Entertain Suitable for watching movies and games DN Itis only available when connecting a PC English 22 Basic Features E Adjusting Picture Settings MENU M Picture gt ENTER C Samsung MagicAngle Adjust screen viewing Angle to optimize screen quality according to your viewing position E Samsung MagicAngle When viewing the screen at an angle from below or above by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front e Off Select when viewing from the front position
37. edule Manager 2 Press the ENTERL button to add programme to schedule manually The Timer Viewing screen appears 3 Press the 4 P a w buttons to set the Antenna Channel Repeat Date or Start Time English 19 Basic Features e Antenna Select the desired antenna source e Channel Select the desired channel e Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience If you select Manual you can set the day you want amp The v mark indicates the date is selected e Date you can set desired date DN It is available when you select Once in Repeat e Start Time You can set start time you want amp On the Information screen you can change or cancel a reserved information e Cancel Schedules Cancel a show you have reserved to watch e Edit Change a show you have reserved to watch e Return Return to the previous screen Channel List CONTENT gt Watch TV Channel List gt ENTER C You can view all the channel searched Channel List The Spo BBC ONE glogal News Antenna Programme View 4b Ch Mode C Watch gt Page e The displayed image may differ depending on the model SD When you press the CH LIST button on the remote control Channel List screen will be displayed at once Using the operation buttons with the Channel List Red Antenna Switches to Air or Cable Yellow Programme View Channel View Displays the programme w
38. eo contents may cause picture distortion especially on fast moving pictures such as sports and action movies A low signal can cause picture distortion This is not a TV issue HD channels will have black bars on either side of the screen when displaying up scaled SD 4 3 contents Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV Adjust the picture size options on your external device or TV to full screen Replace the remote control batteries with the poles in the right direction Clean the sensor s transmission window on the remote Try pointing the remote directly at the TV from 5 6 feet away Programme the Cable Set top box remote control to operate the TV Refer to the Cable Set user manual for the SAMSUNG TV code Check the supported resolution of the TV and adjust the external device s output resolution accordingly This smell is normal and will dissipate over time This function is only available with digital channels from an Antenna RF Coax connection Remove the stand base from the TV and reassemble it Make sure the TV is placed on a flat surface If you can not remove the screws from the TV please use a magnetized screw driver The Channel menu is only available when the TV source is selected If the TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Change the settings from Store Demo mode to Home Use mode in
39. ets the subtitle language amp Ifthe programme you are watching does not support the Hearing Impaired function Preferred automatically activates even if the Hearing Impaired mode is selected QD English is the default in cases where the selected language is unavailable in the broadcast Digital Text Disable Enable UK only If the programme broadcasts with digital text this feature is enabled Auto Protection Time Em Off 2 hours 4 hours 8 hours 10 hours If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen General Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy amore realistic gaming experience by selecting game mode amp NOTE e Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly e Game Mode is not available when the input source is set to TV or PC e After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality e f Game Mode is On Picture mode is set to Standard and Sound mode is set to Movie Menu Transparency Bright Dark Set the Transparency of the menu Boot Logo Off O
40. f the product amp The actual appearance of the TV may differ from the images in this manual depending on the model SD Be careful when you touch the TV Some parts can be somewhat hot Installation with a stand Installation with a wall mount 10cm e An administration fee may be charged if either a an engineer is called out at your request and there is no defect in the product i e where you have failed to read this user manual b you bring the unit to a repair centre and there is no defect in the product i e where you have failed to read this user manual e The amount of such administration charge will be advised to you before any work or home visit is carried out English 2 Contents Getting Started 4 Safety Precautions 11 Accessories 12 Viewing the Control Panel 13 Viewing the Remote Control Connections 14 Connecting to an Antenna 14 Plug amp Play Initial Setup 15 Connecting to an AV Device 16 Connecting to a COMMON INTERFACE slot 16 Connecting to a Audio device and PC 18 Changing the Inout Source Basic Features 18 How to Navigate Menus 19 Using the INFO button Now amp Next guide 19 Using the Channel Menu 21 Channel Menu 22 Picture Menu 25 Sound Menu 27 System Menu 30 Support Menu Advanced Features 32 Using the My Downloads HSITONA Other Information 36 Analogue Channel Teletext Feature 37 Attaching a Wall Mount Desktop Stand 38 Assembling the
41. he PIN input window appears E Digital Channel Tuning Scans for a digital channel 1 Press the EY button to select New DS When selecting Antenna Air Channel Frequency Bandwidth DS When selecting Antenna Cable Frequency Modulation Symbol Rate 2 Press the w button to select Search When scanning has finnished a channel is updated in the channel list E Analogue Channel Tuning Scans for a analogue channel 1 Press the BEY button to select New 2 Set the Programme Colour System Sound System Channel and Search 3 Press the w button to select Store When scanning has finnished a channel is updated in the channel list amp Channel mode e P programme mode When tuning is complete the broadcasting stations in your area have been assigned to position numbers from PO to P99 You can select a channel by entering the position number in this mode C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel Fine Tune analogue channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually Scroll to the left or right until the image is clear D Settings are applied to the channel you re currently watching amp Fin
42. he left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080i 1080p signals are inputted amp amp Adjusts the Position by using a W 4 P button amp NOTE e Depending on the input source the picture size options may vary The available items may differ depending on the selected mode e When connecting a PC only 16 9 and 4 3 modes can be adjusted Settings can be adjusted and stored for each external device connected to an input on the TV If you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function M 4 3 Screen Size 16 9 Wide Zoom Zoom 4 3 Available only when picture size is set to Auto Wide You can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size Q Not available in HDMI mode English 23 Basic Features Maintaining the Correct Posture when Using this Product lt lt O Se HU Advanced Settings Black Tone Dynamic Contrast Shadow Detail Gamma RGB Only Mode Colour Space Native 2 Move C Enter 5 Return Black Tone Off Dark Darker Darkest Select the black level to adjust the screen depth Maintain the correct posture when using this product m Dynamic
43. he product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire English 8 Getting Started Avoid placing a liquid container such as a vase flowerpot beverage cosmetics or drugs or a metal object over the product e f water or substances enter the product turn the power off unplug the power cord and contact a service centre e Otherwise it may result in a problem with the product electric shock or fire AN Caution Displaying a still image for a long time may create a persistent image or stain on the screen e f you do not use the product for a long time use the power saving mode or set the screensaver to the moving picture mode Set the appropriate resolution and frequency for the product e Otherwise it may result in eye strain Watching the product from too close a distance continuously may damage your eyesight It is important to give your eyes some rest 5 minutes every hour when viewing the product screen for long periods of time e This will alleviate any eye strain Do not press down hard on the product The product may become deformed or damaged When not using the product for a long time such as leaving your home unplug the power cord from the wall outlet e Otherwise it may cause dust accumulation and result in fire caused by overheat
44. hen digital channel is selected Returns to the channel view e 4 gt Ch Mode Channel Move to the type of channels you want to display on the Channel List screen SS The option may differ depending on country e Watch Information Watches the channel you select Displays details of the selected programme e S Page Move to next or previous page How to use Timer Viewing in Channel List digital channels only When you set the Timer Viewing in Channel List you can only set the programme in Programme View 1 Press the CH LIST button then select a desired digital channel 2 Press the A Programme View button 3 Press the a w buttons to select the desired programme then press the 4 Information button 4 Select Timer Viewing then press the ENTER LC button when done Q ff you want to cancel Timer Viewing follow steps 1 through 3 Select Cancel Schedules ia Using the Channel CONTENT Watch TV Channel Manager ENTER C Channel Manager Edit the favourite channel and set the channels to Delete Deselect All or Select All You can edit the channel name only for analogue channels 1 2 page Ch Number gt ABC Alice TV BBC ONE BBC ONE BBC THREE CBBC Channel a BBCi r BBCi SNT SNT S Page C Select JI Tools Return Antenna Sorting e The displayed image may differ depending on the model e GA Channels Select a channel in the All TV Radio Data Other Anal
45. ing or short circuit or result in an electric shock Avoid turning the product upside down or move the product holding only the stand e This may cause the product to fall resulting in damage to the product or injury Avoid using a humidifier or cooker near the product e Otherwise it may result in electric shock or fire Since the display panel is hot after using it for a long time do not touch the product English Getting Started Keep the small accessories in a location out of the reach of children Avoid placing a heavy object over the product e Otherwise it may result in a problem with the product or injury Be careful that children do not place the batteries in their mouths when removed from the remote control Place the battery in a location that children or infants cannot reach e f children have had the battery in their mouths consult your doctor immediately Use only specified standard batteries Do not use new and used batteries together e This may cause a battery to break or leak and may cause fire injury or contamination damage Take care when adjusting the angle of the product or the height of the stand e lf your hand or finger is caught you may be injured e lf the product is tilted excessively the product may fall and this may result in injury When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage
46. inks and turns off when the power is on and lights up in standby mode Remote control sensor Aim the remote control towards this spot on the TV SOURCE Toggles between all the available input sources In the on screen menu use this button as you would use the ENTER L button on the remote control MENU Displays an on screen menu the OSD on screen display of your TV s features Adjusts the volume In the OSD use the sag buttons as you would use the lt and gt buttons on the remote control Changes the channels In the OSD use the W CH A buttons as you would use the MHA V and A buttons on the remote control Power Turns the TV on or off Speakers Standby mode Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of electric power is still consumed even when the power button is turned off It is best to unplug the power cord Engish 12 Getting Started Viewing the Remote Control This is a special remote control for the visually impaired and has Braille points on the Channel and Number buttons Turns the TV on and off Have direct access to channels Alternately select Teletext ON Double Mix or OFF Adjusts the volume Displays the main on screen menu Displays the Content Home which includes Watch TV My Downloads and Source Quickly select frequently used functions Move the cursor and select an item Confirm
47. ion The index page of the Teletext service gives you information on how to use the service For Teletext information to be displayed correctly channel reception must be stable Otherwise information may be missing or some pages may not be displayed amp You can change Teletext pages by pressing the numeric buttons on the remote control O GE Teletext on mix off QC EG O page up Displays the next Activates the Teletext mode for the ais Teletext page current channel Press the button 5 Jen O page down Displays the twice to overlap the Teletext mode with the current broadcasting screen Press it one more time to exit teletext store Stores the Teletext pages size Displays the teletext on the upper half of the screen in double size To move the text to the lower half of the screen press it again For normal display press it once again E7 hold Holds the display at the current page in the case that there are several secondary pages that follow automaticially To undo press it again Colour buttons red green yellow blue If the FASTEXT system is used by the broadcasting company the different topics on a Teletext page are colour coded IL Sia aa oga JL TTX MIX eae
48. l cannot be selected and viewed DV This function is available only when the Channel Lock is set to On amp The PIN input screen appears Enter your 4 digit PIN the default of which is 0 0 0 0 Change the PIN using the Change PIN option e Edit Channel Name analogue channels only Assign your own channel name DS This function may not support depending on the region e Edit Channel Number Edit the number by pressing the number buttons desired DT This function may not support depending on the region e Delete You can delete a channel to display the channels you want e Deselect All Select All Select all the channels or deselect all the selected channels in the channel manager Channel Menu E Retuning Channels MENU I Channel gt ENTER Antenna Air Cable a Before your television can begin memorizing the available channels you must specify the type of signal source that is connected to the TV Country depending on the country The PIN input screen appears Enter your 4 digit PIN number S Select your country so that the TV can correctly auto tune the broadcasting channels E Digital Channel Change the country for digital channels E Analogue Channel Change the country for analogue channels Auto Tuning depending on the country SI Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked using the Channel Lock
49. n Display Samsung logo when the TV is turned on Common Interface Cl Menu This enables the user to select from the CAM provided menu Select the Cl Menu based on the menu PC Card Application Info View information on the CAM inserted into the Cl slot and on the Cl or CI CARD which is inserted into the CAM You can install the CAM anytime whether the TV is on or off Purchase a Cl CAM module at your nearest dealer or by phone Firmly insert the Cl or Cl CARD into the CAM in the direction of the arrow Insert the CAM with the Cl or Cl CARD into the common interface slot in the direction of the arrow so that it aligns parallel with the slot Check if you can see a picture on a scrambled signal channel English 29 Basic Features i Picture In Picture PIP MENU I System PIP gt ENTER C PIP You can watch the TV tuner and one external video source simultaneously PIP Picture in Picture does not function in the same mode amp NOTE e For PIP sound refer to the Sound Select instructions e If you turn the TV off while watching in PIP mode the PIP window will disappear e You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke e While Program Rating Lock is in operation the PIP function cannot be used e PIP settings Main picture Sub picture HDMI TV PIP Off On Activate or deactivate th
50. ogue and Favourites 1 5 screen Change the antenna or channel settings using the menus in the top right corner of the screen we Favourites 1 5 Shows favourite channels Dn Using the colour buttons with the Channel Manager e A Red Antenna Switches to Air or Cable D Blue Sorting Change the list ordered by channel name or channel number English 20 Basic Features Channel Status Display Icons Icons Operations An analogue channel lt V A channel selected Kk A channel set as a Favourite a A locked channel Channel Manager Option Menu AJA Set each channel using the Channel Manager menu options Watch Add to Favourites Edit Favourites Lock Unlock Edit Channel Name Edit Channel Number Delete Deselect All Select All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings e Watch Watch the selected channel e Add to Favourites Edit Favourites JEJA Set channels you watch frequently as favourites 1 Select the Add to Favourites Edit Favourites then press the ENTER button DS If the channel is already added to favourite channel Edit Favourites will be shown 2 Press the ENTERC button to select Favourites 1 5 then press the OK button SD One favourite channel can be added in several of Favourites among Favourites 1 5 e Lock Unlock EANA Lock a channel so that the channe
51. or the channels are unavailable Adjust your antenna to increase signal strength Em Troubleshooting If the TV seems to have a problem refer to this description If none of these troubleshooting tips apply contact the Samsung customer service centre English 30 Basic Features Software Upgrade Software Upgrade can be performed via a broadcasting signal or downloading the latest firmware from www samsung com to a USB memory device Current Version the software already installed in the TV O Software is represented as Year Month Day Version Software Upgrade Current Version 2011 01 18 000001 By USB By Channel 2011 01 15 00000 Move Enter 5 Return Installing the Latest Version E By USB Insert a USB drive containing the firmware upgrade file downloaded from www samsung com into the TV Please be careful not to disconnect the power or remove the USB drive until upgrades are complete The TV will be turned off and TV Rear USB Drive on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade E By Channel Upgrade the software using the broadcasting signal DV If the function is selected during the software transmission period software will be automa
52. ote control doesn t turn the TV on or off or adjust the volume A Mode Not Supported message appears There is a plastic smell from the TV The TV Signal Information is unavailable in the Self Diagnosis Test menu TV is tilted to the right or left side There are difficulties assembling the stand base The Channel menu is grey out unavailable Your settings are lost after 30 minutes or every time the TV is turned off You have intermittent loss of audio or video You see small particles when you look closely at the edge of the frame of the TV Solutions and Explanations Check cable connections remove and reconnect all cables connected to the TV and external devices Set your external devices Cable Set top Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV Make sure your connected devices are powered on Be sure to select the TV s correct source by pressing the SOURCE button on the TV remote Reboot the connected device by reconnecting the device s power cable Make sure the Antenna cable is connected securely Please try Plug amp Play Initial setup to add available channels to the channel list Go to MENU System Plug amp Play Initial setup and wait for all available channels to be stored Verify the Antenna is positioned correctly Compression of vid
53. pending on the way to enter the screen Information Displays the selected content category Music for example device USB drive for example folder file name page and sort criteria s File List Section Displays files or folders sorted by criteria you can Music 8 ms select Music 10 No singer Contents mode Device name You can select the desired Content Category or Device Operation Buttons Yellow Edit Mode Lets you select music by checking the files you want to play Only available in Music e 7 Tools Displays the option menu e 9 Return Move to the previous step English 33 Advanced Features Music Playing Music 1 Press the a w 4 jb button to select the desired Music in the file list 2 Press the ENTERL button Hm Not Alone Works For Me Only displays the files with MP3 and PCM file extension Ee en Other file extensions are not displayed even if they are i 4 5MI Mozella saved on the same USB device amp If the sound is abnormal when playing MP3 files adjust the Bias Bakr Equalizer in the Sound menu An over modulated MP3 file f may cause a sound problem India s Life 3 11 Porter 4 Play 4b Pages xJ Tools SD Return e The displayed image may differ depending on the model Playing selected music 1 Press the A Edit Mode button 2 Select the desired music The v mark appears to the left of the selected files 3 Press the TOOL
54. press the INFO button DN If you disconnect the power cord you have to set the clock again Clock Mode Auto Manual e Auto Set the current time automatically using the time from a digital channel Q The antenna must be connected in order to set the time automatically e Manual Set the current time manually D Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually Clock Set Set the Day Month Year Hour and Minute manually Available only when Clock Mode is set to Manual DT You can set the Day Month Year Hour and Minute directly by pressing the number buttons on the remote control Time Zone Auto Manual depending on the country Select your time zone amp This function is only available when the Clock Mode is set to Auto Using the Sleep Timer E Sleep Timer QJ Automatically shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes DV To cancel Sleep Timer select Off Setting the On Off Timer mM On Timer 1 On Timer 2 On Timer 3 Three different on timer settings can be made You must set the clock first On Timer 1 A Sun Mon Tue Wed Thu Fri Sat gt HEHEHE a E On Time Volume M Source Antenna Channel Adjust 4 Move Enter D Return Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you c
55. rces name you want E VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Name the device connected to the input jacks to make your input source selection easier When connecting a PC to the HDMI IN 1 DVI port with HDMI cable you should set the TV to PC mode under Edit Name When connecting a PC to the HDMI IN 1 DVI port with HDMI to DVI cable you should set the TV to DVI PC mode under Edit Name amp amp When connecting an AV devices to the HDMI IN 1 DVI port with HDMI to DVI cable you should set the TV to DVI Devices mode under Edit Name Information SOURCE TOOLS Information gt ENTER C You can see detailed information about the selected external device How to Operate the OSD On Screen Display The access step may differ depending on the selected menu The main menu options appear on the screen Picture Sound Channel System Support Select an icon with the A or V button Press ENTERL 4 to access the sub menu Select the desired submenu with the A or V button Adjust the value of an item with the lt or B button The adjustment in the OSD may differ depending on the selected menu Press ENTERL to complete the configuration Press EXIT 1 MENU mM A V ENTER l A V lt gt ENTER l EXIT g Y O O1 amp DN Engish 18 Basic Features Using the INFO button Now 4 Nex
56. rly E Equalizer Adjusts the sound mode Balance L R Adjusts the balance between the right and left speaker 100Hz 300Hz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies Reset Resets the equalizer to its default settings Engish 25 Basic Features i Sound Systems Etc MENU II Sound ENTER Q Broadcast Audio Options mM Audio Language digital channels only Change the default value for audio languages D The available language may differ depending on the broadcast E Audio Format digital channels only Select the audio format M Audio Description not available in all locations digital channels only This function handles the Audio Stream for the AD Audio Description which is sent along with the Main audio from the broadcaster amp Audio Description Off On Turn the audio description function on or off DV Volume Adjust the audio description volume Additional Settings digital channels only E DTV Audio Level MPEG HE AAC This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level Dn According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OdB DV To increase or decrease the volume adjust between the range O and 10 respectively Dolby Digital Comp Line RF This f
57. stallation engineer e When installing the product using a wall mount purchase a wall mount that provides at least 10 cm 3 93 inches of space from the wall e Use the wall mount according to the international specifications Assembling the Cables Use the Cable Holder to hide the cables behind the stand 3S The colour and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically P fix the system when using it in a public place The appearance and locking method lt TV Rear gt 2 Au may differ from the illustration depending on the manufacturer Refer to the manual f provided with the Kensington Lock for additional information on proper use O Please find a R icon on the rear of the TV A kensington slot is beside the fk icon To lock the product follow these steps lt Optional gt 1 Wrap the Kensington lock cable around a large stationary object such as desk or chair 2 Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock These are general instructions For exact instructions see the User manual supplied with the locking device
58. supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements e f more than 2 PTP devices are connected you can only use one at a time e If more than two MSC devices are connected some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported If an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction English 3 2 Advanced Features e Ifthe TV has been no input during time set in Auto Protection Time the Screensaver will run e The power saving mode of some external hard disk drives may be released automatically when connected to the TV e fa USB extension cable is used the USB device may not be recognized or the files on the device may not be read e f a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection e My Downloads only supports sequential joeg format a Screen Display Move to the desired file using the a w 4 gt buttons and then press the ENTERC button The file is played My Downloads screen may differ de
59. t cloth or cushion on a flat surface to protect the panel and place the product face down 3 Hold the main body of the product with your hand Pull the stand in the direction of the arrow as shown in the figure to separate it Wall Desktop Stand Mount Wall mount kit desktop stand not supplied 4 Align wall mount desktop stand to the Monitor TV and firmly fix the wall mount desktop stand by fastening the screw 5 Align the groove of the part of the product that is to be connected to the stand with the groove in the stand desk top stand wall mount stand or another stand and firmly fix the stand by fastening the screw D NOTE e f you use screws that are longer than the standard specifications the inside of the product may be damaged e For wall mounts that are not compatible with the standard VESA specifications the length of the screw may differ depending on the corresponding specifications English 34 Other Information e Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force This may result in damage to the product or injury due to the product falling Samsung shall not be held liable for any damage or injury e Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount desktop stand that is not compatible with the specifications or due to an installation not performed by an authorized in
60. t guide The display identifies the current channel and the status of certain audio video settings The Now 8 Next guide shows daily TV programme information for each channel according to the broadcasting time e Scroll 4 gt to view information for a desired programme while watching the current channel e Scroll a w to view information for other channels If you want to move to the currently selected channel press the ENTERC button abc1 18 11 Thu 6 Jan DTV Air Life On Venus Avenue Unclassified Information 1 5 No Detaild Information Using the Channel Menu Press the CONTENT button to select Watch TV and then select the menu you want to use Each screen will be displayed Watch TV i Guide am Schedule Manager Channel List Channel Manager My Downloads e The displayed image may differ depending on the model Guide CONTENT Watch TV gt Guide gt ENTERC The EPG Electronic Programme Guide information is provided by broadcasters Using programme schedules provided by broadcasters you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status Using Channel View 2 10 Tue 1 Jun DTV Air 800 five Home and Away a 18 00 18 30 Drama wee Dani is devastated when scott makes clear his views on m
61. tically searched and downloaded DS The time required to download the software is determined by the signal status E Alternative Software backup If there is an issue with the new firmware and it is affecting operation you can change the software to the previous version DV If the software was changed existing software is displayed mM Standby Mode Upgrade Off 1 hour later 2 hours later 00 00 02 00 12 00 14 00 A manual upgrade will be automatically performed at selected time Since the power of the unit is turned on internally the screen may be turned on slightly for the LED product This phenomenon may continue for more than 1 hour until the software upgrade is complete Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software Contents Home You can enjoy useful and various contents Engish 3A Advanced Features Using the My Downloads My Downloads Enjoy photos music files saved on a USB Mass Storage Class MSC device 1 Press the CONTENT button 2 Press the amp w 4 gt button to select desired menu Photos Music then press the ENTER C button CONTENT My Downloads gt ENTER C3 Connecting a USB Device 1 Tum on your TV TV Rear 2 Connect a USB device containing photo and music files to the USB
62. tions from the channel line up e Antenna connection Try HD stations after performing Auto tuning Sy Many HD channels are up scaled from SD Standard Definition contents e Adjust the Cable Set top box video output resolution to 1080i or 720p e Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal e Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies e Low signal level or bad quality can cause picture distortion This is not a TV issue e Mobile phones used close to the TV cca up to 1m may cause noise in picture on analogue and digital TV e Adjust the Picture options in the TV menu go to Picture Mode Colour Brightness Sharpness e Adjust Energy Saving option in the TV menu go to MENU System Eco Solution Energy Saving e Try resetting the picture to view the default picture settings go to MENU Picture Reset Picture e If the picture size is set to Screen Fit change it to 16 9 e Change cable satellite box resolution e f connected with a cable box please try to reset the cable box Reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes e Set the output resolution of the cable box to 1080i or 720p First of all please perform the Sound Test to confirm that your TV audio is properly operating go to MENU Support Self Diagnosis So
63. ture may not display or a connection error may occur e A basic high speed HDMI cable or one with ethernet is recommended This product does not support the ethernet function via HDMI Using a Scart Cable Available devices DVD VCR eee SERVICE EXT RGB PEEEELE ELEY PETE EP ET ES In Ext mode DTV Out supports MPEG SD Video and Audio only amp SERVICE Connector for service only Engish 15 Connections Using the Cl or Cl CARD To watch paid channels the Cl or Cl t CARD must be inserted e f you don t insert the Cl or Cl CARD some channels will display the message Scrambled Signal e The pairing information containing a telephone number the Cl or Cl CARD ID the Host ID and other information will be displayed in about 2 3 minutes If an error message is displayed please contact your service provider e When the configuration of channel information has finished the message Updating Completed is displayed indicating the channel list is updated D NOTE e You must obtain a Cl or Cl CARD from a local cable service provider o Te x co Lu 2 z o O tw e When removing the Cl or Cl CARD carefully pull it out with your hands since dropping the CI or Clt CARD may cause damage to it Insert the Cl or Clt CARD in the direction marked
64. unction minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound amp Select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB Speaker Settings Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night Reset Sound OK Cancel Reset all sound settings to the factory defaults E Selecting the Sound Mode When you set to Dual II the current sound mode is di splayed on the screen Type no Mono Mono Automatic h PARN change Dual I Dual II Dual I Mono Mono Automatic NICAM change Stereo Dual Mono Dual I Dual I Dual I v SW If the Stereo signal is weak and an automatic switching occurs then switch to the Mono D Only activated in stereo sound signal D Only available when the input Source is set to TV English 26 Basic Features il Setting the Time MENU I System gt ENTER Time M Clock Setting the clock is for using various timer features of the TV The current time will appear every time you
65. und Test If the audio is OK the sound problem may caused by the source or signal e Please check the volume of the device Cable Sat Box DVD Blu ray etc connected to your TV e lf you are using a DVI to HDMI cable TV set does not support audio e Reboot the connected device by reconnecting the device s power cable e lf your TV has a headphone jack make sure there is nothing plugged into it e For antenna or cable connections check the signal strength Low signal level may cause sound distortion e Make sure the AC power cord is securely plugged in to the wall outlet and the TV e Make sure the wall outlet is working e Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to The remote control does not work below Ensure the Sleep Timer is set to Off in the Time menu If your PC is connected to the TV check your PC power settings Make sure the AC power cord is plugged in securely to the wall outlet and the TV When watching TV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal English 39 Other Information Issues There is no picture video RF Cable Antenna Connection The TV is not receiving all channels The picture is distorted macro block error small block dots pixelization Others The picture will not display in full screen The remote control does not work The cable set top box rem

Samsung T27A300

Contents

Download Pdf Manuals

Related Search

Related Contents