Shure SE535-CL headphone
Contents
1. SE535 Transducer type Triple balanced armature drivers Sensitivity at 1khz 119 dB SPL mW Impedance at 1kHz 360 Frequency Range 18 Hz 19 kHz Input connector 3 5mm 1 8 in gold plated stereo plug Net weight 30 g 1 oz Operational temperature 18 C to 57 C 0 F to 135 F Storage temperature 29 C to 74 C 20 F to 165 F CERTIFICATION Eligible to bear CE Marking Conforms to EMC Directive 2004 108 EC Meets applicable tests and performance criteria in European Standard EN55103 1996 parts 1 and 2 for residential E1 and light industrial E2 environments The Declaration of Conformity can be obtained from the address below Shure Europe GmbH Authorized European representative Shure Europe GmbH Headquarters Europe Middle East amp Africa Department EMEA Approval Wannenacker Str 28 D 74078 Heilbronn Germany Phone 49 7131 72 140 Fax 49 7131 72 1414 Email EMEAsupport shure de cee Europe Middle East Africa Shure Europe GmbH Wannenackestr 28 74078 Heilbronn Germany Phone 49 7131 72140 Fax 49 7131 721414 Email info shure de Asia Pacific Shure Asia Limited 22 F 625 King s Road North Point Island East Hong Kong Phone 852 2893 4290 Fax 852 2893 4055 Email info shure com hk2. SE535 SAFETY PRECAUTIONS Before using this product please read and save the enclosed warnings and safety instructions WARNING FOR ALL EARPHONES For safe and correct use of earphones read this manual before use Keep the manual and safety information in a convenient place for future reference Safety Precautions The possible results of incorrect use are marked by one of two symbols WARNING and CAUTION depending upon the imminence of the danger and the severity of the damage A Ignoring these warnings may cause severe injury or death as a result of WARNING incorrect operation A Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation CAUTION WARNING LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE USE AS LOW A VOLUME AS POSSIBLE Over exposure to excessive sound levels can damage your ears resulting in permanent noise induced hearing loss NIHL Please use the following guidelines established by the Occupational Safety Health Administration OSHA on maximum time exposure to sound pressure levels before hearing damage occurs 90 dB SPL 95 dB SPL 100 dB SPL 105 dB SPL at 8 hours at 4 hours at 2 hours at 1 hour 110 dB SPL 115 dB SPL 120 dB SPL at Ye hour at 15 minutes Avoid or damage may occur 2010 Shure Incorporated 27A13835 Rev 2 Sound Isolating Earphones Shure Sound Isolating Earphones built with balanced armat
3. eeve that provides the best fit and sound isolation It should be easy to insert fit comfortably and easy to remove Soft Flex Sleeves In small medium and large sizes Made from pli able rubber Inserting the Earphones Insert the earphones so they form a tight seal The fit of the earphone can greatly affect sound quality Soft Foam Sleeves Compress the foam sleeve between your fingers and insert into the ear canal Hold in place for about ten seconds while the foam expands Triple Flange Sleeves If desired use scissors to trim the stem on the sleeve wW O Important If there seems to be a lack of low frequency response bass this means that the earphone sleeve is not forming a tight seal Gently push the earphone deeper into the ear canal or try a different sleeve Warning Do not push the earphone sleeve beyond the ear canal opening Cleaning the Earphone Nozzle If you notice a change in sound quality remove the sleeve and check the nozzle of your earphone If nozzle is blocked clear obstruction by using wire loop end of cleaning tool Cleaning Caution When cleaning do not force any object through the earphone nozzle This will damage the earphone sound filter Warning The cleaning tool is only to be used to clean the earphones Any other use such as using the tool to clean ears could result in injury Accessories Earphone Sleeves Music Phone Accessory Cables Replacement Cables Vo
4. lume Control Carrying Cases Adapters For more information visit www shure com Maintenance Careful maintenance ensures a tight seal between the sleeve and nozzle improving sound quality and product safety Keep the earphones and sleeves as clean and dry as possible To clean sleeves remove them from earphones gently rinse in warm water and air dry Foam sleeves require a longer drying time Inspect for damage and replace if necessary Ear sleeves must be completely dry before reusing Wipe the earphones and sleeves with mild antiseptic to avoid infections Do not use alcohol based disinfectants Do not expose earphones to extreme temperatures Replace the sleeves if they do not fit properly Do not attempt to modify this product Doing so will void the warranty and could result in personal injury and or product failure Note The cable connectors to the earphones may collect debris or other deposits that can affect audio quality If this happens disconnect the cables and clean them using a dry cotton swab WARNING This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm SHU z United States Canada Latin America Caribbean Shure Incorporated 5800 West Touhy Avenue Niles IL 60714 4608 USA Phone 847 600 2000 Fax 847 600 1212 USA Fax 847 600 6446 Email info shure com www shure com 2010 Shure Incorporated Technical Specifications
5. may increase the risk of sleeves detaching from the nozzle and becoming lodged in your ear fa Prior to inserting the earphone always recheck the sleeve to make sure it is firmly attached to the nozzle If a sleeve becomes lodged in your ear seek skilled medical assistance to remove the sleeve Dam age to the ear may be caused by non professionals attempting to remove the sleeve S Do not attempt to modify this product Doing so could result in personal injury and or product failure WARNING This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Do not immerse in water such as while taking a bath or washing your face otherwise sound deteriora tion or failures may result Do not use while sleeping as accidents may result O Use a slow twisting motion to remove the earphones Never pull on the earphone cord w Stop using the earphones immediately if they are causing great discomfort irritation rash discharge or any other uncomfortable reaction A If you are currently receiving ear treatment consult your physician before using this device Detachable Cable Changing Sleeves You may need to detach the cable from the earphones to attach optional components or to replace the cable if it becomes damaged To prevent accidental separation the connector has a snug fit Take special care to prevent damage
6. to the earphone and connector i a l Twist and pull to remove the sleeve from the nozzle Do not use pliers or other tools Grasp the connector and the earphone as close as possible to where they join Pull straight apart do not twist Cable is a snap fit not threaded Do not pull on the cable or put any pressure on the earphone nozzle Slide on a new sleeve so that it completely covers Listen for a click when connecting the barb and the nozzle When reattaching the cable match the L and R markings For clear cables and earphones match the color dots Red Right Blue Left Note If you pull at an angle the connector will not detach Caution If the barb or any of the nozzle is exposed the sleeve is not properly installed Replace sleeves if they do not tightly grip the nozzle To ensure proper fit and performance use only sleeves supplied by Shure unless us ing custom molded sleeves Audible click when properly seated Wearing the Earphones Removing the Earphones The following are some suggested ways of wearing the earphones Grasp the body of earphone and gently twist to remove Note Do not pull on cable to remove earphone Over the ear in back Wearing the cable over the ear Tighten the cable and take up Choosing a Sleeve and securing it behind the head slack by raising the cable cinch can help keep the earphones in place during physical activity Select an earphone sl
7. ure speakers deliver a detailed soundstage free from outside noise The powerful and stylish Shure SE earphones come with a detachable cable adapters a durable carrying case and interchangeable Sound Isolating sleeves for a comfortable and personalized fit gue Do not use when a failure to hear your surroundings could be dangerous such as while driving or when biking walking or jogging where traffic is present and accidents could occur P Keep this product and its accessories out of reach of children Handling or use by children may pose a risk of death or serious injury Contains small parts and cords that may pose risk of choking or strangulation 4 Set the volume level of the audio device to a minimum and then after connecting the earphones adjust the volume gradually Sudden exposure to loud noises could cause hearing damage rE Turn up the volume control only far enough to hear properly A Ringing in the ears may indicate that the volume level is too high Try lowering the volume gt If you connect these earphones to an airplane s sound system listen at low levels so that loud mes sages from the pilot do not cause discomfort 9 Have your hearing checked by an audiologist on a regular basis If you experience wax buildup discontinue use until a medical professional has examined your ears Failure to use clean or maintain earphone sleeves and nozzles according to manufacturer s instruc tions
Download Pdf Manuals
Related Search