Philips Hair clipper QC5130
Contents
1. Clipper has no other user serviceable parts For assistance call_ 800 243 3050 Assistance For assistance call toll free 1 800 243 3050 or visit our website www philips com norelco Information is available 24 hours a day 7 days a week Be sure Clipper is turned OFF Remove cord from outlet and Clipper before storing in a safe dry location where it will not be crushed banged or subject to damage Do not wrap cord around Clipper when storing Store cord in a safe location where it will not be cut or damaged Do not place or store Clipper where it can fall or be pulled into a tub or sink water or other liquid while plugged in Battery Removal This Philips Norelco Clipper contains rechargeable Nickel Metal Hydride batteries which must be disposed of properly fig 15 Batteries should only be removed when Clipper is to be discarded D For assistance visit our website www philips com norelco or call toll free 1 800 243 3050 El Unplug electrical cord from outlet and Clipper before dismantling Clipper FJ Allow Clipper to run until the battery is empty depleted EJ Turn Clipper OFF E Remove the hair clipping comb and cutting unit from the handle E Use a screwdriver to remove the 2 screws at the back of the handle fig 16 EJ Pull the back panel off the Clipper fig 17 Remove the 6 screws on the inside of the Clipper with a screwdriver fig 18 EJ Separate2. D FOR ANY SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES In order to obtain warranty service simply go to wwwophilips com norelco or call 800 243 3050 for assistance It is suggested that for your protection you return shipments of product by insured mail insurance prepaid Damage occurring during shipment is not covered by this warranty NOTE No other warranty written or oral is authorized by Philips Electronics North America Corporation This warranty gives you specific legal rights and you may also have other rights which vary from state to state Some states do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion and limitations may not apply to you Read enclosed instructions carefully Manufactured for Philips Consumer Lifestyle A Division of Philips Electronics North America Corporation PO Box 10313 Stamford CT 06904 This symbol on the product s nameplate means it is listed by Underwriters Laboratories Inc Norelco is a Registered Trademark of Philips Electronics North America Corporation PHILIPS is a Registered Trademark of Koninklijke Philips Electronics N V 2010 Philips Electronics North America Corporation Alll Rights Reserved PHILIPS NORELCO 45 DAY MONEY BACK GUARANTEE If you are not fully satisfied with your Philips Norelco Hair Clipper send the product back along with dated sales receipt and we ll refund you the full purchase price T
3. PHILIPS NORELCO Hair Clipper QC5130 Rechargeable Cordless Cord Register your product and get support at www philips com norelco ENGLISH IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic safety precautions should always be followed including the following Read all instructions before using this appliance DANGER To reduce the risk of electric shock Do not reach for a clipper that has fallen into water Unplug immediately Use clipper only in dry condition Do not use while bathing or in a shower Do not submerge clipper in water Do not place or store clipper where it can fall or be pulled into a tub or sink Do not place in or drop into water or other liquid Always unplug this clipper from the electrical outlet immediately after using except when clipper is re charging Unplug clipper before cleaning When discarding clipper unplug clipper to remove rechargeable battery See Battery Removal instructions WARNING To reduce the risk of burns fire electric shock or injury to persons 1 Close supervision is necessary when this appliance is used by on or near children or invalids Use this clipper for its intended household use as described in this manual Do not use attachments not recommended by Philips Electronics North America Corporation Never operate this clipper if it has a damaged cord or plug if it is not working properly if it has been dropped damaged
4. See Battery Removal instructions for battery disposal information Registration Congratulations on your purchase and welcome to Philips Norelco To fully benefit from the support that Philips Norelco offers register your product at www philips com norelco Features Hair Clipping Comb Hair Length Selector Stainless Steel Cutter Blades On Off Slide Switch Charging Light Socket for Appliance Plug Appliance Plug Adaptor Cleaning Brush Full Two Year Warranty 45 Day Money Back Guarantee TIATMOOFDYD 4 kabr 3 ANA T I JE sV LAK w gt i l IT os a Ae 7 UD YOS Q A Put It To The Test Like many new products your Philips Norelco Hair Clipper may take a little getting used to If you are using an electric Clipper for the first time or if you ve been using a different brand take the time to acquaint yourself with your new Hair Clipper Your Hair Clipper features a strong motor and stainless steel cutter blades to comfortably clip most hair types Throw your scissors away and put your new Hair Clipper to the test We guarantee precise results or Philips Norelco will refund you the full purchase price as long as the request is received within 45 days of purchase To Charge Recharge Fully charge Clipper before using for the first time or after non use for a long period of time Battery performance is best if you recharge only when the battery is almost compl
5. e as a reminder for future clipping sessions Trimming Length Settings Table 1 8 in 3mm 3 16 in 5mm 9 32 in 7mm 3 8 in 9mm 7 16 in I Imm 1 2 in 13mm 5 8 in 15mm 21 32 in 17mm 3 4 in 19mm 718 in 21mm Clipping without hair clipping comb El Remove the hair clipping comb by pressing and sliding the Hair Length Selector upwards fig 7 Be careful when you are clipping without comb attachment as when the Clipper is turned on it will remove every hair it touches BA To contour the hairline around the ears comb the hair ends over the ears EJ Tilt the Clipper in such a way that only one edge of the cutter blades touches the hair ends when you shape the contours around the ears fig 8 Only cut the hair ends The hairline should be close to the ear El To contour the nape of the neck or sideburns turn the Clipper and hold it with the cutter blades pointing downwards fig 9 E Move the Clipper slowly and smoothly following the natural hairline Clean the attachments after each use Always switch Clipper OFF unplug and remove power supply cord from Clipper before cleaning Do not use compressed air abrasive cleaning agents scourers or liquids such as alcohol benzene bleach or acetone to clean the Clipper and attachments Never clean replace or remove Clipper attachments with motor ON Never rinse or immerse the Clipper in water or any other liquid Do not apply p
6. etely empty Charging recharging or using Clipper at temperatures below 40 F or higher than 95 F adversely affects lifespan of the battery Continuously recharging Clipper will reduce lifespan of battery El Be certain Clipper is OFF FJ Insert the appliance plug directly into the Clipper fig 1 and plug the adapter into any 120V AC outlet Use only the cord provided EJ The Charging Light on the appliance will light to indicate the Clipper is charging D It will take approximately 10 hours to fully charge the Clipper for a cordless clipping time of up to 40 minutes NOTE After the Clipper is fully charged the Charging Light will remain lit E Disconnect the cord and unplug from electrical outlet Optimize the working life of the battery After the Clipper has been charged for the first time do not recharge the Clipper between clipping sessions Continue using it until the battery is completely empty Do not charge for more than 24 hours Do not keep cord permanently plugged in Discharge run down the battery completely twice a year by letting the motor run until it stops D If the Clipper hasn t been used for a long period of time it must be recharged for a full 10 hours Corded Hair Clipping Only use the Clipper corded when the battery is almost empty Clipper does not recharge during corded clipping El Connect cord provided to Clipper fig 1 and plug Clipper
7. he Clipper must be shipped prepaid by insured mail insurance prepaid and have the original sales receipt indicating purchase price and the date of purchase enclosed We cannot be responsible for lost mail The Clipper must be postmarked no later than 45 days after the date of purchase Philips Norelco reserves the right to verify the purchase price of the Clipper and limit refunds not to exceed suggested retail price To obtain Money Back Guarantee Return Authorization Form call 1 800 243 3050 for assistance Please allow 4 6 weeks for delivery of check
8. into electrical outlet FJ If battery is completely empty wait a few minutes before switching clipper ON E Slide ON OFF switch ON to begin clipping E When finished clipping turn Clipper OFF and unplug Cordless Hair Clipping El Charge according to directions Unplug Clipper from outlet and remove cord FJ Slide ON OFF switch ON to begin clipping EJ If the charge runs out while clipping simply connect cord provided to Clipper and outlet to continue clipping Hair Clipping Use this Clipper for its intended household use as described in this manual gt Make sure that the appliance is fully charged before you start clipping hair Before you start clipping make sure that the head of the person whose hair you are cutting is at the same level as your chest so that all parts of his her head are clearly visible and within easy reach Only use the appliance on clean dry hair Do not use on freshly washed hair Before you begin comb the hair in the direction of growth fig 2 To achieve optimal clipping results always move the appliance slowly through the hair against the direction of hair growth Clipping with hair clipping comb El Be certain the Clipper is in the OFF position BA Slide the hair clipping comb into the guiding grooves on both sides of Clipper and push until you hear it click into place fig 3 Make sure the comb locks properly into position EJ Press the Ha
9. ir Length Selector 1 and slide it to the desired setting 2 fig 4 The Clipper can cut hair up to 10 different lengths EZ The remaining hair length is indicated by the settings on the side of the comb When you are clipping for the first time start at the maximum clipping length setting 7 8 in 2 mm to familiarize yourself with the appliance and prevent accidentally trimming hairs too short As you become familiar with the settings adjust the Hair Length Selector to desired trimming length E Make sure that the flat part of the comb is always in full contact with the scalp to obtain an even result J Since all hairs do not grow in the same direction move the appliance slowly over the crown from different directions i e upwards downwards and across to achieve an even result fig 6 Always move the appliance against the direction of hair growth EJ Make overlapping passes over the head to ensure that all hair that should be cut has been cut EJ For best results with curly sparse or long hair use a styling comb to guide the hair towards the Clipper A Turn the Clipper off regularly during clipping and remove the hair clipping comb to blow and or shake out hair that has accumulated gt REMEMBER You must reset the hair length selector back to your desired setting every time you replace the hair clipping comb on the appliance TIP Write down the settings you have used to create a certain hairstyl
10. or dropped into water For assistance visit our website www philips com norelco or call 1 800 243 3050 Do not rinse or immerse the clipper handle in water or any other liquid Keep the clipper cord and any attachments away from heated surfaces Never drop or insert any object into any opening Do not operate charge or plug in clipper outdoors or where aerosol spray products are being used or where oxygen is being administered Always check cutters cutting unit and combs before using the clipper Do not use the clipper if cutters cutting unit or combs are damaged as injury may occur Always attach plug to clipper first then to outlet To disconnect turn on off switch to OFF position then remove plug from outlet To prevent possible damage to the cord do not wrap cord around the clipper Use only the cord provided to charge and re charge clipper Never put clipper in direct sunlight or store at a temperature above 140 F This clipper is for use on human hair only Do not use this clipper for any other purpose Always store your clipper attachments and power plug in a moisture free area Make sure the cord is disconnected from the clipper SAVE THESE INSTRUCTIONS IMPORTANT The power plug contains a transformer Do not cut off the power plug to replace it with another plug as this will cause a hazardous condition IMPORTANT Your clipper contains NICKEL METAL HYDRIDE RECHARGEABLE BATTERIES
11. ressure to cutters Do not touch cutters with hard objects as this may damage them Use a soft dry cloth to clean Clipper handle During Use D If cut hairs have accumulated in the comb area remove hairs by shaking blowing or using cleaning brush provided Remember to adjust the clipping length back to your selected setting when you replace the comb on Clipper After Each Use E Make sure the Clipper is switched OFF and disconnected from the electrical outlet FJ Remove the hair clipping comb by pressing and sliding the Hair Length Selector upwards fig 7 EJ Blow and or shake out any hair that may have accumulated in the hair clipping comb E Push the middle part of the cutter blade upwards with your thumb until it opens fig 10 H Clean the cutting unit with the brush supplied fig 11 J Clean the inside of the Clipper with the brush supplied fig 12 Clean the handle and the adapter with the cleaning brush supplied or with a dry cloth NOTE The Clipper does not need any lubrication Replacing the Cutting Unit If your cutters become damaged or worn do not continue using the Clipper Replace cutters immediately El Push the middle part of the cutting unit upwards with your thumb until it opens and then pull it off the Clipper fig 13 FJ Place the notch of the new cutting unit in the slot and push the cutting unit onto the Clipper fig 14 You will hear a click This
12. the power unit from the front panel fig 19 E Cut the wires close to the batteries fig 20 M Do not attempt to replace batteries Insulate battery ends by covering with tape and or place batteries in a small plastic bag Wl Discard your Clipper Do not attempt to plug electrical cord into the outlet or recharge the Clipper after the batteries have been removed fH Contact your local town or city officials for battery disposal information or call 1 800 8 BATTERY or www rbrc com for battery drop off locations 4222 002 8082 2 Full Two Year Warranty Philips Electronics North America Corporation warrants each new Philips Norelco product Model QC5130 except cutters and comb against defects in materials or workmanship for a period of two years from the date of purchase and agrees to repair or replace any defective product without charge IMPORTANT This warranty does not cover damage resulting from accident misuse or abuse lack of reasonable care the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specific voltage Use of unauthorized replacement parts will void this warranty PHILIPS ELECTRONICS NORTH AMERICA CORPORATION WILL NOT PAY FOR WARRANTY SERVICE PERFORMED BY A NON AUTHORIZED REPAIR SERVICE AND WILL NOT REIMBURSE THE CONSUMER FOR DAMAGE RESULTING FROM WARRANTY SERVICE PERFORMED BY A NON AUTHORIZED REPAIR SERVICE NO RESPONSIBILITY IS ASSUME
Download Pdf Manuals
Related Search