Doro PhoneEasy 610 103g
Contents
1. Passwords change your passwords To change the PIN PIN2 or the Phone code passwords l Enter the current code and confirm with OK 2 Enter a new code and confirm with OK 3 Enter the new code again and confirm with OK Reset settings If you select Reset settings the changes that you have made to the phone settings will be reset to default settings Input the phone password and press OK to reset Reset all If you select Reset all your phone s settings and content such as contacts number lists and messages will be deleted in phone memory SIM memory is not affected Input the phone password and press OK to reset Note The default Phone code is 1234 38 English Additional functions Alarm Press Menu scroll to A and press OK Select On and press OK Enter the alarm time using the keypad then press OK For a single occurrence select Single and press OK For a repeated alarm select Repeated and press OK Scroll through the list of weekdays and press On Off to enable disable the alarm for each weekday then press Save To edit an alarm press Edit then press OK 7 To stop the alarm press Off The alarm is now deleted Note The alarm will work even when the phone is switched off Do not press Yes to power on If wireless phone use Is prohibited or when it may cause Interference or danger When the alarm goes off a signal will sound Press Stop to turn off the alarm or press Snooze to repeat t2. vCard message 44 pine nno er catene lll English Activating the phone Press and hold the red button w on the phone to turn It on off Confirm with Yes to power off The following messages may be displayed nu SIM card missing or incorrectly inserted mE n SIM card damaged or not valid aX If the SIM card is valid but protected with a PIN code Personal Identification Number PIN is displayed Enter the PIN code and press OK E upper left corner of keypad Delete with Clear upper right corner of keypad Note If PIN and PUK codes were not provided with your SIM card please contact your service provider Attempts shows the number of PIN attempts left When no more attempts remain PIN blocked is displayed The SIM card must now be unlocked with the PUK code Personal Unblocking Key 1 Enter the PUK code and confirm with OK 2 Enter a new PIN code and confirm with OK 3 Re enter new PIN code and confirm with OK Standby Idle mode When the phone is ready to use and you have not keyed in any characters the phone is In standby Left soft key In standby is Menu Right soft key in standby is Name Tip You can always press F to return to standby English Changing the language time and date The default language is determined by the SIM card See Settings General p 20 on how to change language time and date Making a call 1 Enter the phone number including the area code Delete
3. 1 Press Menu scroll to WY and press OK 2 Select Outbox and press OK 3 Select a message and press Read Use s o to scroll the message up down 4 Press Options Send Send again to the same receiver Reply Type your reply then press Done Message is sent immediately Call Press OK to call the contact Delete Press Yes to delete the message or No to return Edit Edit the message then press Send Forward Forward a message Edit the message If desired then press Send Use number Displays all phone numbers contained in the message as well as the sender s number Select one of the displayed numbers and press Options for following options Call the selected number Save o Save the number in the phonebook Send SMS Write a new SMS message 18 English Call log Received missed and dialled calls are saved in a combined call log 20 calls of each type can be stored in the log For multiple calls related to the same number only the most recent call IS saved Retrieving and dialling l Presse lt Alternatively press Menu scroll to and press OK 2 Use NYASA to scroll through the Call log Received call Dialled call a Missed call 3 Press a to dial the number or press Options for the following settings Show details for the selected call Delete Delete the call Delete all Delete all calls in the Call log Save Save the number in the Phonebook 19 English Setti
4. Press Menu scroll to Gi and press OK 2 Select a contact and press Options 3 Select one of the following options and press OK View Show details for the selected contact 13 English Edit 1 Use N A to move the cursor Delete with Clear 2 Press Save Add new see Creating a phonebook entry p 13 Call Press OK to call the contact Send SMS Press OK to write a SMS message see Creating and sending SMS p 17 Delete Press OK to delete the selected phonebook entry Press Yes to confirm or No to abort Delete all Select From SIM or From phone and press OK to delete all phonebook entries from the SIM card or phone memory Enter the phone code and press OK to confirm The default phone code is 1234 Copy all Select From SIM and press OK to copy all phonebook entries from the SIM card to the phone memory Press Yes to confirm or No to abort Select From phone and press OK to copy all phonebook entries from the phone memory to the SIM card Press Yes to confirm or No to abort Send vCard Select Send by SMS and press OK to send the selected phonebook entry as a vCard via SMS Enter the phone number of the recipient Alternatively use the arrow keys N A to scroll through the phonebook or quick search by pressing the key corresponding to the first letter of the entry see Entering text 5 p 7 Press OK to send 14 English Select Via Bluetooth and press OK to send the selected phonebook entry as a vCard via
5. 10 g tissue Declaration of Conformity Doro hereby declares that Doro PhoneEasy 610 conforms to the essential requirements and other relevant regulations contained in the Directives 1999 5 EC R amp TTE and 2002 95 EC RoHS A copy of the Declaration of Conformity is available at www doro com dofc English Version 1 0 2011 Doro AB All rights reserved C O 7 O O www doro com
6. BT Incoming calls are forwarded to Bluetooth device Security l Press Menu scroll to SI and press OK 2 Select Security and press OK SIM lock The SIM card is protected with a PIN code Personal Identification Number The phone can be set to ask for the PIN code on startup Select one of the following options and press OK to confirm PIN code activated you need to enter the PIN code Le every time the phone is started PIN code deactivated Warning if SIM card is lost stolen it Is Unprotected Automatic You do not need to enter the PIN code when the phone is started the phone remembers it automatically If SIM card is moved to another phone lost stolen the PIN code needs to be entered to unlock Note You need to input the current PIN code to disable enable SIM lock Phone lock Select On Off and press OK to enable disable 36 English Note You need to Input the current Phone code to disable enable Phone lock The default Phone code Is 1234 Remote configuration gt Allow persons that you trust usually a family member or friend to send information to your Doro PhoneEasy 610 You can receive phonebook contacts and contacts for speed dial keys calendar tasks and settings for the emergency key When activated you don t have to do anything it s the other person that sends information to you Select Remote config and press OK for the following settings Activation Select On to activate
7. Bluetooth See Settings Bluetooth p 35 on how to connect with Bluetooth ICE In Case of Emergency With this additional information and medical information first responders can access this information from the victim s phone in case of emergency In the event of a trauma it Is critical to have this information as early as possible which can increase the chances of survival All fields are optional but the more information provided the better 1 Press Menu scroll to Gi and press OK 2 Select FICE and press OK 3 Press Edit 4 Use N A to select the different fields and enter the relevant information see Entering text SD p 7 Delete with Clear Name Enter your own name Birth Enter your date of birth Height Enter your height Weight Enter your weight Language Enter your language Insurance Enter your insurance provider and policy number Contact 1 Press Options and then OK to Add or Delete your personal contact from phonebook or Save If you have room write even relationship to the contact person and his or her name such as ICE Wife Mary Smith Contact 2 Press Options and then OK to Add or Delete your personal contact from phonebook or Save Doctor Press Options and then OK to Add or Delete your personal contact from phonebook or Save 15 English Condition Enter any existing medical conditions medical devices e g coronary artery disease pacemaker diabetic etc Allergies Ent
8. Confirm with O F alert c 1 You want to set the Signal type to low alert s 1 Tip Remember to write down the positions you send This way it is easier for you to later send changes Setting the one touch memories fr memorykey a Name number A key max length max length 40 memorykey b number e max length max length 40 30 memorykey c number m ie max length max length 40 30 Example You want to set Jeff Jackson s mobile number in memory key A in Doro PhoneEasy 610 Martha Thomson in memory key B and Steve Lewis in memory key C 46 English memorykeyF a Jeff Jackson 0 00393939 memorykey b Martha Thomson 0763991014 memorykey c Steve Lewis 0 09441819 Add task to calendar command p1 p2 pa yyyymmdd hhmm note Date Time description of task max length 35 Example 1 You want to send a new calendar task to Doro PhoneEasy 610 It is for a dentist appointment in December 1 2010 at 10 30 task 20101201 1030 dentist appointment 47 English Troubleshooting Phone cannot be switched on Battery charge low Connect the power adapter and charge the battery for 3 hours Battery incorrectly Check the installation of the battery installed Failure to charge the battery Battery or charger Check the battery and charger damaged Battery should Improve the charging environment only be charged in temperatures between O C and 40 C Ch
9. Menu scroll to I and press OK 2 Select Sound and press OK 3 Select Silent and press OK 4 Select On Off to enable disable 5 Press OK to save Tip Press and hold shortcut key E to activate deactivate Silent Tone setup 1 Press Menu scroll to SI and press OK 2 Select Sound and press OK 3 Select Tone setup and press OK 23 English 4 Select Ring tone and press OK 5 Scroll NFSA to select one of the available melodies the melody will be played Press OK to confirm or press Back to discard changes 6 Set up the Alarm Message tone Opening tone Closing tone Keypad tone Power on and Power off in the same way Ringtone volume l Press Menu scroll to SP and press OK 2 Select Sound and press OK 3 Select Volume and press OK 4 Scroll 7 H to change the ring volume then press OK Alert type G Incoming calls can be signalled by a ring tone and or vibration 1 Press Menu scroll to SI and press OK 2 Select Sound and press OK 3 Select Alert type and press OK 4 Scroll 7 H to select signalling mode then press OK Ring only Ring tone only Vib only Vibration only Vib amp ring Vibration and ring tone Starts with vibration and adds ring tone after a short while Extra tone Warning and error tones are used to alert you of low battery power phone and SIM card errors etc Press Menu scroll to SI and press OK Select Sound and press OK Select Extra tone and pres
10. a fault occurring during this period please contact the place of purchase Proof of purchase is required for any service or support needed during the guarantee period This guarantee will not apply to a fault caused by an accident or a similar incident or damage liquid ingress negligence abnormal usage non maintenance or any other circumstances on the user s part Furthermore this guarantee will not apply to any fault caused by a thunderstorm or any other voltage fluctuations As a matter of precaution we recommend disconnecting the charger during a thunderstorm Batteries are consumables and are not included in any guarantee This guarantee does not apply if batteries other than DORO original batteries are used Specifications Network GSM 850 900 1800 1900 MHz Dimensions 100 mm x 52 mm x 22 mm Weight 103 g including battery Battery 3 7 V 800 mAh Li ion battery Bluetooth is a registered trademark of Bluetooth SIG inc eZiType is a trademark of Zi Corporation vCard is a trademark of the Internet Mail Consortium Hearing aids This device should work with most hearing aid equipment in the market However full compatibility with all equipment can not be promised Specific Absorption Rate SAR This device meets applicable international safety requirements for exposure to radio waves Doro PhoneEasy 610 measures 0 313 W kg measured over 10 g tissue The maximum limit according to WHO is 2 0 W kg measured over
11. dialling Off The phone dials without sending a message first Message Press Edit and enter the message and then press OK to confirm Note You must write a message If you activate the SMS function Confirm with O Select one of the following options and press OK The phone will dial the first number on the list If the call is not answered within 25 seconds the next number Is dialled Dialling is repeated 3 times or until the call is answered or until w is pressed The function will work as above AND If the receiver doesn t press J within 60 seconds the call will be disconnected and the next number in sequence will be called If the receiver presses QJ within 60 seconds the call is confirmed and no further call attempts will be made emergency sequence interrupted Signal type Adjustment of the signal type for notification of the emergency sequence Select one of the following options and press OK High Loud signals default One low signal No sound indication like a normal call Alarm info Please read this important safety information before enabling the emergency function Be careful about including numbers with automatic answering in the call list as the alarm sequence stops once the call is answered 34 English Note This information is not applicable if Confirm with 0 is set to On Bluetooth When you are not using Bluetooth connectivity select Function on off Off or Visib
12. from network 50 English Common Questions and Answers Why hasn t the mobile phone been supplied with a SIM card Many people already have a mobile phone and wish to transfer their card over to the new phone This has the advantage of keeping the same telephone number and if the card is subscribed to a Pay as you go service then you also benefit from being able to carry over any credit that has been paid the card Where can get a SIM card from Any high street mobile phone shop will be able to provide you with a SIM card Some of the major supermarket chains also provide mobile phone services and can supply a SIM card A useful tip when choosing a SIM card service provider however is to make sure that you have adequate signal coverage at home Can use the SIM card from my old mobile phone Yes as long as the SIM card is less than three years old you can transfer the card over Some old SIM cards however are not compatible with the Doro mobile phone as they are from an earlier generation of SIM card design Can use a SIM card from any mobile phone company The Doro mobile phone is what is termed as an open SIM card phone and so it is not restricted to any particular service provider or mobile phone company How do pay for my calls There are two main types of registration with a service provider One is a contract this is where you sign up for agreed contract over several months year and pay
13. list The phone will then dial the first number on the list If the call is not answered within 25 seconds the next number is dialled Dialling is repeated 3 times or until the call is answered or until w is pressed The Emergency function must be activated before use See Settings Emergency p 33 on how to activate the function as described above or with 3 key presses how to enter contacts In numbers list and how to edit the text message The Emergency function can also be configured so that the receiver of the call must press O zero to confirm the emergency call in order to stop the alarm sequence If there is a risk that the emergency call will be answered by a voice mall answering service please activate the function Confirm with O See Settings Emergency F p 33 11 English Note When an emergency call is activated the phone is pre set to handsfree mode Automatic calls to emergency numbers e g 112 999 911 or other official emergency numbers are normally not allowed Do not save emergency numbers in the list of numbers to be called automatically Some private security companies can accept automatic calls from their clients Always contact the security company before using their phone number Information to the receiver of an Emergency call when Confirm with O is activated After receiving the emergency message each number in the Numbers list will be called sequentially To confirm the emergenc
14. 046 280 50 11 Office number 046 280 50 83 phonebook Jeff Jackson 0 700393939 0462805011 046280 5083 The number will be saved in the 610 Phonebook as A Jeff Jackson 0700393939 fii 0462805011 Eh 0462805083 Note Only use numerals for parameters 2 3 and 4 If you use letters in these parameters it will be stored as empty blank in the Phonebook Contacts already saved in the Phonebook will not be replaced They will be duplicated This is to avoid unintentional removal of contacts from the Phonebook Tip When storing international numbers always use before the country code for best operation Enter the phone number including the area code 44 English Setting the emergency function command P1 P2 Pa a activation n 1 5 number number location in max Numbers length 40 list c confirm with O S 0 1 2 signal type O High l Low 2 Silent m message max length 0 Example You want to activate the emergency function alert a 1 You want Jeff Jackson to be stored in Numbers list in position one 1 with phone number 0700 393939 alert n l jJeff Jackson 0700393939 45 English You want the SMS message to be sent out when the emergency button Is pressed Example of content in text message This is an emergency message Please take appropriate actions alert m 1 This is an emergency message Please take appropriate actions You want to turn on the function
15. Doro PhoneEasy 610 English DESIGN BY DORO OF SWEDEN i Earpiece Left soft key Call key Microphone Speed dial ER Voice mail Ed Silent Input method SMS shortcut Arrow keys 10 End call Power on off OMNATRWNY 11 2a LS 14 15 16 17 Right soft key LED light Battery level low charging LED light New message Missed call Emergency button Charging socket Headset socket Battery cover Volume control 19 20 21 Loudspeaker Lanyard Charging stand INSTANGHON cino rari l Installing the SIM card and the battery sees l CTA llr e e E E E E EA E pie 2 1100 ee E E E E A A 2 FICIDILI SEHUIMOS corsico ATEAN AANE ENEN EEA A 2 FHONC INGAICAlO Siino 3 Display status SYMDOIS ii 3 Display malin SY M100 Sveicn craxewsndaoassevenseatndcacumaeasiesaneenmseenadnen ats 4 OS NO iii i in 5 Activating the phone renne e gara 5 IVI A all Woreas cess ceatarets Soaweauswaaereowameanssosemneide n pan 6 Making a call from the Phonebook cccccceeeeeeeeeeeteeeeeeeeaas 6 COINS dll nia rina 6 VOI ESCORT er dee ii Entering text a E 7 A ODON Sorea E E sienna cae usneedeoeweeas 9 IN WAIE serene E E E 9 COLIN ren E EE ETOT 10 DOSS EEE e a 10 Ainett E a TT 10 ELELE lt e APOP eni 10 O Cal onr E EATA 10 EMO ONC KOY alici 11 FF RO CIO OO ii pini S 13 Creating a phonebook ENtry cccececeeeeeeeeeeeeteee
16. K Select Speed dial and press OK Select ZY and press Add Select an entry from the phonebook and press OK Repeat to add speed dial entries for keys 19 0 D ABE To change contact select an existing entry and press Options then select Edit or Delete and press OK Sii To speed dial an entry from standby press and hold corresponding key You can edit the contact Information for the dedicated speed dial keys EY E and 1 Press corresponding key Use x7 H to highlight the name or the number then press Edit 2 Press OK to confirm Delete with Clear Top 10 setting gt Set the entry as one of the first 10 contacts listed in the phonebook 1 Press Menu scroll to P and press OK 2 Select Calls and press OK 3 Select Top 10 setting and press OK 27 English 4 Select one of the empty entries and press Add 5 Use NYSA to scroll through the phonebook or quick search by pressing the key corresponding to the first letter of the entry 6 Press OK to save the selected entry or press Back to return to the menu To delete a Top 10 entry select the entry in the Top 10 list and press Options then Delete Call time During a call the duration of the call is shown You can check the duration of your calls l Press Menu scroll to Pad and press OK 2 select Calls and press OK 3 Select Call time and press OK 4 Select one of the following options and press OK Last call Show the elapsed time
17. an agreed monthly fee This is more suited to people who are using their mobile phone as part of their job for example The other is Pay as you go sometimes abbreviated to PAYG With this type of service you add credit to the card and top up as and when required Topping up the card is easy you can do this over the phone on line at many shops and even some cash points allow you to do this PAYG is more suited to less frequent users How do find out my credit balance The service provider of the SIM card should have provided an information pack with the card This will give details of a short number to dial in order to check your balance These access codes differ between mobile phone companies so please check the details specific to your service provider Key in your number press the talk button and the credit balance will be announced to you 51 English Safety instructions The unit and the accessories can contain small parts Keep all of the equipment out of the reach of small children The mains adapter is the disconnect device between the product and mains power The mains socket outlet must be close to the equipment and easily accessible Network services and costs Your device is approved for use on the GSM 850 900 1800 1900 MHz networks To use the device you need a subscription with a service provider Using network services may result in traffic costs Some product features require support from the network and
18. arger incorrectly Check the charger connections connected to phone or power socket Standby time decreases Battery charge Install a new battery Capacity too low Too far from base Searching the network consumes battery station phone is power Find a place with a stronger signal constantly searching or temporarily turn off the phone for signal Failure to place or receive calls Call barring activated Deactivate call barring If this does not solve the problem contact your service provider 48 English PIN code not accepted Wrong PIN code Enter the PUK code to change the PIN entered too many code or contact your service provider times SIM card error Check the condition of the SIM card If it IS damaged contact your service provider installed Remove the card and reinstall it damp with a clean cloth Failure to connect to network SIM card invalid Contact your service provider No coverage of GSM Contact your service provider service Weak signal Too far from base Try again from another location station Network congestion Try calling at a later time Echo or noise Regional problem from Hang up and redial This may switch to bad network relay another network relay Failure to add a contact Phonebook memory Delete contacts to free up memory full 49 English Failure to set a function Function not Contact your service provider supported or subscribed
19. ct 15 sec 30 sec or 1 min and press OK Brightness You can customize the phone s brightness settings 1 Press Menu scroll to Pad and press OK 2 Select Display and press OK 3 Select Brightness and press OK 4 Select Level 1 Level 3 and press OK Calls Voice mail If your subscription includes an answering service callers can leave a voice mail message when you cannot answer a call Voice mail is a network service and you may need to subscribe to it first For more information and for the voice mail number contact your service provider Press Menu scroll to SI and press OK Select Calls and press OK Select Voice mail and press OK Select Empty and press Add Select Phonebook to add a contact from the Phonebook Alternatively press Manual See Phonebook p 13 on how to add names numbers 6 Press Save to confirm ee Pe To edit or delete an existing entry select it and press Options then select Edit or Delete and press OK Connect 1 Press Menu scroll to SP and press OK 26 English 2 select Calls and press OK 3 Select Voice mail and press OK 4 Select Options and press OK 5 Select Connect and press OK to call the voice mailbox Tip Press and hold shortcut key RR to call your voice mail Speed dial gt EN E3 and the numerical keys Ke and PA can be used for Speed dialling Adding speed dial numbers Press Menu scroll to SP and press OK Select Calls and press O
20. d 9 preset channels cia Turning the radio on 1 Connect the headset to the headset socket Q 2 Press Menu scroll to lt and press OK The radio is turned on The tuned frequency is displayed Select channel using N or om Use the side keys to adjust the volume 3 Press w n to return to standby mode The radio will continue to play Save frequency Press Menu scroll to and press OK Select channel using N or AS When a station has been found select Options Select Save frequency and press OK Enter a name for the new channel see Entering text 5 DF Press Save Switch off 1 Press Menu scroll to lt I and press OK 2 Press Options and then press Switch off Si a a Tip Disconnecting the headset will also turn off the radio Channel list editing the channel list 1 Press Menu scroll to lt I and press OK 41 English Select Options Select Channel list and press OK Select the channel you wish to edit and press Options or Add Select one of the following options and press OK Play the selected channel Delete Delete the channel Press Yes to confirm or No to return to the channel list CRI Edit the channel name then press N to edit the frequency use EJ to enter the decimal point Press Save Selecting channels Press keys R E2 to quick select a preset channel while the radio Is playing Manual input changing search mode 1 Press Menu scroll to lt I and pres
21. e messages on various topics from your service provider such as weather or traffic conditions in a particular region For available channels and relevant channel settings contact your service provider Cell broadcast messages cannot be received when the device IS roaming Select Cell information and press OK for the following settings Sl English Function on off To turn information On or Off Select Read and press OK to read the message Select language On Off and press Done Select from which channels you want to receive subscribe messages Use the options Select Add Edit and Delete to define your channels SMS Reminder g The SMS reminder alerts you once if you haven t checked your text message within 10 minutes from receipt If notification envelope is removed by pressing w no reminder will be heard Select SMS Reminder and press On Off to enable disable Profile set This number is needed to use the message function The number to your service centre is supplied by your service provider and is usually set on the SIM card If the service centre number is saved on the SIM card It is shown If not you can enter the number yourself Contact your service provider for more information 1 Press Edit and enter the service centre number Press Clear to delete 2 Press OK to save the new number Vibration Q The SMS vibration alert is several short vibrations that continues for either Short 4 seconds or Long 12
22. eeeeeseeatsaeeneass 13 Creating ICE entry In Case of Emergency 13 Managing phonebook ENTries 13 ICE In Case of Emergency cccccccccccccceeeeeeeeeeeeeeeeueueueeueeeuaeaears 15 VESTA 17 Creating and sending SMS Li 17 MOON e E E R 17 ULIDO EE EEE PE E E EE E EEA 17 Cal NO oee a E E E E E E saan 19 Retrieving andina 19 EAEI Ee A EE A 20 310 01 aE A Ro E ARA A RASTA 23 DISP rei A E 25 e E E N E N E E EE NE E E 26 GSE eke S ee eee ee ree 30 Emergency Aa ececcccececceeececcuececeaeeeeeeueeeeeneeeeeeaneeeeranereesanes 33 BIUCIOOI aan 39 31 CUA RE RO E E ER ATA 36 Additonal TUNIS 39 PUI RR A E E 39 5 86 RR RR AR ZARA 40 NC UA OM ail n 40 PVG ACI OF anni i 41 Instructions for the REMOTE USER cece i 43 WOU DVS OO NG rn o ira 48 Common Questions and ANSWEFS 51 SAI INSUFLICETO Scie rnta E T 52 Network services and COS S i 52 Operating environment 52 MOIO 52 Areas with explosion rISK iii 53 EMEC Ney Calloni snai anni 53 WEIN CS lari 53 Care and MAINTENANCE i 54 EC 1 ARCO RR E IAA 55 SDC TC ALLOWS arere o i ed 55 FS eA US dll Sar ia rr 55 Specific Absorption Rate SAR seterc acres tnrseraniedspeeebincietedantvens 55 Declaration Of Conformity i 55 English Installation Turn off the phone and disconnect the charger before removing the battery cover Installing the SIM card and the ba
23. er any known allergies e g penicillin bee stings Blood type Enter your blood type Vaccination Enter any relevant vaccination Medication Enter any medication that you are treated with Other info Enter your other info e g organ donor living will consent to treat etc Press Save when done Press g w to return to standby mode 16 English Messages Creating and sending SMS 1 Press Menu scroll to NY and press OK Select Write message and press OK 2 3 Type your message see Entering text 5 p then press To 4 Select receiver from Phonebook and press OK Alternatively select Enter number to add recipient manually Enter the phone number and press OK Select Add to add more recipient or press Send to send b You can also modify the recipients by selecting one and press Options to Edit Delete Delete all Note If you choose to add multiple recipients you will be charged for each recipient maximum 10 For international calls always use before the country code for best operation Press twice for the international prefix Tip Press shortcut key to reach the Messages menu Inbox gt lt message unread message read 1 Press Menu scroll to NY and press OK Select Inbox and press OK 3 Select a message and press Read Use N A to scroll the message up down 4 Press Options see options after Outbox p 17 Outbox message sent message unsent 17 English
24. eys J and BIH When you have stored a speed dial you simply press and hold corresponding key to call your contact See also Settings Calls Speed dial 5 Dar Silent Silent Is a fixed profile with Keypad tone Message tone and Ring tone disabled while Vibration Tasks and Alarm are unchanged Tip Press and hold shortcut key Ej to activate deactivate Silent Headset When a headset Is connected the internal microphone in the phone is automatically disconnected When receiving a call you can use the answer key on the headset cable if It has one to answer and end calls Using a headset at high volume may damage your hearing Adjust the volume level carefully when using a headset SOS calls As long as the phone Is switched on it is always possible to place an SOS call by entering the main local emergency number for your present location followed by ea 10 English Some networks accept calls to emergency numbers without a valid SIM card Contact your service provider for more information Emergency key Do not hold the device near your ear when the handsfree mode is in use because the volume may be extremely loud The Emergency key allows you easy access to contact predetermined numbers should you need help To make an emergency call press and hold the Emergency key on the back of the phone for 3 seconds or press it two times within 1 second The phone will send a text message to all phone numbers in the numbers
25. he alarm after 9 minutes a 39 English Calendar 1 Press Menu scroll to 21 and press OK 2 Select Options 3 Select one of the following options and press OK View tasks Show tasks for the selected date Add task l Enter a date for the task then press Sw 2 Enter a time for the task then press Se 3 Enter a description for the task see Entering text 5 p 7 4 Press Save to save the task At the set date time an alert tone will be played and the task description will be shown on the display Press Silent and then OK to turn off the alarm or press Snooze to repeat the alarm after 9 minutes Jump to date Enter the date and press OK View all Select a task and press Options for the following options Edit Edit the selected task Delete the selected task Delete all Delete all tasks Note The calendar will work even when the phone is switched off Do not press Yes to power on if wireless phone use is prohibited or when it may cause interference or danger Calculator The calculator can perform basic mathematical operations l Press Menu scroll to bs and press OK 40 English Enter the first number Use J to enter decimal points Use the arrow keys to select an operation x and press OK Enter the next number and press OK Repeat steps 2 4 as necessary Select and press OK to calculate the result FM radio The FM radio has a frequency range from 87 5 to 108 0 MHz an
26. ility Off Do not pair with an unknown device You can connect wireless to other Bluetooth compatible devices such as headsets 1 Press Menu scroll to SP and press OK 2 Select Bluetooth and press OK for the following settings Function on off Select On Off and press OK to enable disable Bluetooth Visibility Select On Off to make your phone visible invisible to other devices Note To prevent other devices from finding your device select Off Even if you select Off paired devices can still detect your device Device name Enter the name your phone should appear with for other Bluetooth devices and press OK Search device Search for available Bluetooth audio devices If Bluetooth is not enabled you can enable it now by pressing Yes 1 Select from the list of devices and press Bond to connect 2 When connecting to another Bluetooth device you need a shared password Enter the password and press OK My device Lists saved devices and enables you to add new devices Select device from the list and press Options 35 English Connect Di Connect disconnect selected device Select required sconnect profile usually a headset Set default Select the connected device as default Change the name of the device Delete the device from the list Delete all Delete all devices from the list Audio path Select one of the following options and press OK IPhone Incoming calls are answered with the phone Forward
27. lect Call setup and press OK Select Call waiting and press OK Select one of the following options and press OK Enables call waiting Disables call waiting OR WN Query status Displays If call waiting IS active or not Call divert You can divert calls to an answering service or to another phone number Set up which calls should be diverted Select a condition and press OK then select Activate Deactivate or Query status see Call waiting p 29 for each 1 Press Menu scroll to SP and press OK 2 select Calls and press OK 3 Select Call setup and press OK 29 English 4 Select Call divert and press OK 5 Select one of the following options and press OK Voice calls Diverts all voice calls Unreachable Diverts Incoming calls if the phone is turned off or out of range No reply Diverts Incoming calls If unanswered If busy Diverts Incoming calls if the line is busy Cancel diverts Do not divert calls Call barring Your phone can be restricted to disallow certain types of calls Note A password Is needed to apply Call barring Contact your service provider to get the password Press Menu scroll to SE and press OK Select Calls and press OK Select Call setup and press OK Select Call barring and press OK Select one of the following options and press OK Outgoing calls Press OK then select AII calls User can answer Incoming calls but not dial out Internat calls User can not call interna
28. ll not be reached until the battery has been charged 3 4 times Batteries degrade over time which means that call time and standby time will normally decrease with regular use Save energy When you have fully charged the battery and disconnected the charger from the device unplug the charger from the wall outlet Symbols Helpful settings The following symbols will guide you to settings in the manual with special support for English Visibility O Hearing Q Handling gt Safety afe Phone indicators p lt flash when you have a new message or a missed call After reading the new message missed call the envelope will stop flashing le flash when the battery is running low and during charging Display status symbols Network signal strength strong The higher the Network signal strength bar the stronger the insufficient no network signal Ring only EzE Unread message in Inbox ina vieni on visible to Po on Invisible to Vibration only o Es Roaming in other l QY Missed call Battery level Call forward activated Headset connected Voice mail message received English 2 Insert SIM PI Charger connect Bo emcee ai a Charger removed TT Message sending success Headset out N Display main symbols Missed call Press Read to see the missed calls Call on hold SOS calls only Processing please walt Volume control n CI cy New message a este oy Emergency call
29. network operators is displayed after a short delay Select desired operator and press OK Services This menu may contain pre programmed services from your network provider Depending on network support and subscription 1 Press Menu scroll to SI and press OK 2 Select General and press OK 3 Select Services and press OK Phonebook storage 1 Press Menu scroll to SE and press OK 2 Select General and press OK 3 Select Phonebook storage and press OK 4 Select one of the following options and press OK to confirm 1 phone number per contact Number and length of the phone numbers contacts that can be stored will vary depending on SIM card service provider preferences 300 contacts with 3 phone numbers each Mobile number Home number or Office number 22 English Sound Note Silent needs to be set to Off to access Tone setup Volume Alert type and Extra tone See Silent p 23 Audio setup If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment you can customize the phone s audio settings 1 Press Menu scroll to SI and press OK 2 Select Sound and press OK 3 Select Audio setup and press OK 4 Select one of the following options and press OK Normal For normal hearing in normal conditions For mild hearing impairment or usage in noisy environment For moderate hearing impairment or usage in very noisy environment Silent l Press
30. ngs Note The settings described In this chapter are carried out in standby mode Press F to return to standby mode General Time amp date Setting the time and date Press Menu scroll to SP and press OK Select General and press OK Select Time amp date and press OK Select Set time and press OK Enter the time HH MM then press OK Select Set date and press OK Enter the date DD MM YYYY then press OK Setting the time date format Press Menu scroll to Pad and press OK Select General and press OK Select Time amp date and press OK Select Set format and press OK Select Time format and press OK Select 12 hours or 24 hours and press OK Select Date format and press OK Select the desired date format and press OK oS S Ea RARE dia Auto time on off Press Menu scroll to SI and press OK Select General and press OK Select Time amp date and press OK Select Auto time and press OK Select On Off and press OK E 20 English To set the phone to automatically update the time and date according to the current time zone select On Automatic update of date and time does not change the time you have set for the alarm clock or the calendar They are in local time Updating may cause some alarms you have set to expire Depending on network support and subscription Language The default language for the phone menus messages etc IS determined by the SIM card You can change this to any o
31. ntenance Your unit is a technically advanced product and should be treated with the greatest care Negligence may void the warranty Protect the unit from moisture Rain snowfall moisture and all types of liquid can contain substances that corrode the electronic circuits If the unit gets wet you should remove the battery and allow the unit to dry completely before you replace it e Do not use or keep the unit in dusty dirty environments The unit s moving parts and electronic components can be damaged e Do not keep the unit in warm places High temperatures can reduce the lifespan for electronic equipment damage batteries and distort or melt certain plastics e Do not keep the unit in cold places When the unit warms up to normal temperature condensation can form on the inside which can damage the electronic circuits e Do not try to open the unit in any other way than that which is indicated here e Do not drop the unit Do not knock or shake it either If it is treated roughly the circuits and precision mechanics can be broken e Do not use strong chemicals to clean the unit The advice above applies to the unit battery mains adapter and other accessories If the phone is not working as it should please contact the place of purchase for service Don t forget the receipt or a copy of the invoice 54 English This product is guaranteed for a period of 12 months from the date of purchase In the unlikely event of
32. of the most recent call Dialled calls Show the elapsed time of all dialled calls Received Show the elapsed time of all received calls Calls Reset all Press Yes to reset the timer or No to return to the menu Answer mode 1 Press Menu scroll to Pad and press OK 2 select Calls and press OK 3 Select Answer mode and press OK for the following settings 4 Select Open to answer and press OK select On and press OK to be able to answer incoming calls by opening the fold Select Any key and press OK select On and press OK to be able to answer incoming calls by pressing any key exemption e Call setup Depending on network support and subscription Contact your service provider for more information 28 English Caller ID Display or hide your phone number on the recipient s phone when you call Press Menu scroll to A and press OK Select Calls and press OK Select Call setup and press OK Select Caller ID and press OK Select one of the following options and press OK Set by network Use default setting by the network Hide ID Never show your number sia Send ID Always show your number Call waiting You can handle more than one call at a time An alert tone will be heard If there Is an incoming call while talking To put the current call on hold and answer the incoming call press Options select Answer and then OK 1 Press Menu scroll to SI and press OK Select Calls and press OK Se
33. remote configuration and press OK On Remote configuration enabled Off Remote configuration disabled Numbers list You need to add the name and number of the people who are allowed to send information from their phone to your Doro PhoneEasy 610 1 Select Numbers list and press OK 2 Select Empty and press Add 3 Select Phonebook to add a contact from the Phonebook Alternatively press Manual 4 Press 9 5 Enter the number and press Save Repeat until you have 5 contacts maximum To edit or delete an existing entry select it and press Options then select View Edit or Delete and press OK Fixed dial FDN You can limit calls to certain numbers saved on the SIM card The list of allowed numbers is protected by your PIN2 code 37 English Select On Off and press OK Enter PIN2 and press OK to confirm Fixed Press Add to enter the first allowed number numbers Alternatively select an entry and press Options for the following settings Add Edit or Delete and press OK Enter PIN2 and press OK to confirm Note You can save parts of phone numbers For example If you save 01234 allows calls to all numbers starting with 01234 It Is possible to place an SOS call by entering the main local emergency number followed by m even when fixed dial is activated When fixed dial is activated you are not allowed to view or manage any phone numbers saved on the SIM card You are not able to send any SMS either
34. rical keys repeatedly to select characters Press the key repeatedly until the desired character is shown Walt a few seconds before entering the next character Press for a list of special characters Select the desired character with s o and press OK to enter it Use the side keys or to move the cursor within the text Press EJ to cycle upper case lower case and numerals English Entering text with predictive text In some languages you can use the Smart ABC eZiType M input method which uses a dictionary to suggest words See Settings Messages Predictive text gt p 31 on how to activate predictive text Press each key once even if the displayed character is not the one you want The dictionary will suggest words based on the keys you have pressed 1 To write the word Fred press Ky EA E E Complete the word before looking at the suggestions 2 Use x7 e to view the suggested words 3 Press Select and continue with the next word Alternatively press K to continue with the next word If none of the suggested words are correct press FJ to change to manual input mode The icon on the top left of the display indicates the input mode Abc Sentence case with predictive text ABC UPPER CASE with predictive text abc lower case with predictive text Abc Sentence case ABC UPPER CASE abc lower case 123 Numerals Note The selected menu language determines the available input methods Engli
35. s 52 English Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 15 cm be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker Persons with pacemakers e Should always keep the phone more than 15 cm from their pacemaker when the phone is turned on e Should not carry the phone in a breast pocket e Should use the ear opposite the pacemaker to minimize the potential for interference If you have any reason to suspect that interference is taking place turn the phone off immediately Areas with explosion risk Always turn off the unit when you are in an area where there is a risk of explosion Follow all signs and instructions There is a risk of explosion in places that include areas where you are normally requested to turn off your car engine In these areas sparks can cause explosion or fire which can lead to personal injury or even death Turn off the unit at filling stations and any other place that has fuel pumps and auto repair facilities Follow the restrictions that apply to the use of radio equipment near places where fuel is stored and sold chemical factories and places where blasting is in progress Areas with risk for explosion are often but not always clearly marked This also applies to below decks on ships the transport or storage of chemicals vehicles that use liquid fuel such as propane or bu
36. s OK 2 Select Options 3 Select Manual input and press OK 4 Select one of the following options and press OK Manual tuning with N or N Auto Search Automatic station search with N or SX Auto save Note This will overwrite all previously saved channels 1 Press Menu scroll to lt I and press OK 2 Select Options 3 Select Auto save and press OK to automatically install available radio stations in channels W K 42 English Instructions for tte REMOTE USER Sending remote control commands by text message Activation must be set to On and the remote user must be entered in Numbers list on the Doro PhoneEasy 610 Menu gt s Security Remote config All contacts sent to Doro PhoneEasy 610 by remote configuration are Stored in the Phone even if storage Is set to SIM 3 phone numbers for each contact amp Mobile number Gr Home number or Office number Note SMS format must be Command otherwise the SMS cannot be identified as a remote control command Parameters are the content you want to send and you must use sign to separate two parameters In tables P Parameters 43 English Setting a contact in the phonebook command P1 p2 ps a phonebook name mobile max max length 30 length 40 Example You want to send Jeff Jackson s mobile number home number and his office number to Doro PhoneEasy 610 The mobile number is 0700 393939 Home number
37. s OK Select Warning and press On Off to enable disable Select Error and press On Off to enable disable Press Save to save Se a 24 English Display Wallpaper You can select different display backgrounds Press Menu scroll to SI and press OK Select Display and press OK Select Wallpaper and press OK Scroll N 7 to display available wallpapers Press OK to confirm or Back to discard changes Text size You can customize the text size for messages and the phonebook 1 Press Menu scroll to SI and press OK 2 Select Display and press OK 3 Select Text size and press OK 4 Select Normal or Large and press OK Se St Idle display In standby mode the display can show clock only clock and the service provider or all information 1 Press Menu scroll to SI and press OK 2 Select Display and press OK 3 Select Idle display and press OK 4 Select Clock only Clock amp Operator or All info and press OK Themes You can select different themes to personalise the phone s texts and background 1 Press Menu scroll to SI and press OK Select Display and press OK Select Themes and press OK Scroll 37 0 to select a theme Press OK to confirm or Back to discard changes EZIO 25 English LCD backlight gt Select the delay time for the display backlight l Press Menu scroll to pf and press OK 2 Select Display and press OK 3 Select LCD backlight and press OK 4 Sele
38. seconds Note If Alert type is set to Ring only the phone will not vibrate Delivery report You can select if you want the phone to notify you when your SMS has reached the receiver Select Delivery report and press OK Select On or Off to enable disable Press OK to save 32 English Note If you choose Delivery report On some operators will charge you for that message Emergency F Settings for the Emergency key function 1 Press Menu scroll to SP and press OK 2 Select Emergency and press OK for the following settings Activation Select one of the following options and press OK To activate press and hold key for approximately 3 seconds or press 2 times within 1 second On 3 To activate press key 3 times within 1 second Off Emergency key disabled Numbers list The list of numbers that will be called when the Emergency key Is pressed 1 Select Empty and press Add 2 Select Phonebook to add a contact from the phonebook Alternatively press Manual See Phonebook p 13 on how to add names numbers 3 Press Save to confirm Repeat until you have 5 contacts maximum To edit or delete an existing entry select it and press Options then select Edit or Delete and press OK SMS The message to be sent to the contacts in numbers list when the Emergency key is pressed Activation Select one of the following options and press OK 33 English On The phone sends a text message before
39. sh Call options During a call the soft keys lt give access to additional functions Options left soft key A menu with the following options is displayed Hold single Hold retrieve the current call call Retrieve single End single call End the current call same as e Mute Disable the microphone SPK on right soft key Activates handsfree mode which allows you to speak without holding the phone Speak clearly into the microphone at a maximum distance of 1 m Use the side keys to adjust the loudspeaker volume Press SPK off to return to normal mode Note The handsfree function allows only one person at a time to talk Switching between talk listen is triggered by the sound of the person talking Loud noises music etc In the background may interfere with the function Call waiting An alert tone will be heard if there is an incoming call while talking To put the current call on hold and answer the Incoming call press Options select Answer and then OK 1 Soft keys have multiple functions The current key function is shown above the soft key on the display English Tip Call waiting must be activated see Settings Calls Call setup p 28 Call information During a call the outgoing or incoming phone number and the elapsed call time is displayed If the identity of the caller is withheld Unknown is displayed Speed dial You can use keys EN E and and you can also use the numerical k
40. tane areas where the air contains chemicals or particles such as grain dust or metal powder Emergency calls Mobile phones use radio signals the mobile phone network the terrestrial network and user programmed functions This means that connection cannot be guaranteed in all circumstances Therefore never rely only on a mobile phone for very important calls such as medical emergencies Vehicles Radio signals can affect electronic systems in motor vehicles for example electronic fuel injection ABS brakes automatic cruise control air bag systems that have been incorrectly installed or are inadequately protected Contact the manufacturer or its representative for more information about your vehicle or any additional equipment 53 English Do not keep or transport flammable liquids gases or explosives together with the unit or its accessories For vehicles equipped with air bags Remember that air bags fill with air with considerable force Do not place objects including fixed or portable radio equipment in the area above the airbag or the area where it might expand Serious injuries may be caused if the mobile phone equipment is Incorrectly installed and the airbag fills with air It is prohibited to use the unit in flight Turn off the unit before you board a plane Using wireless telecom units inside a plane can pose risks to air safety and interfere with telecommunications It may also be illegal Care and mai
41. ther language supported by the phone 1 Press Menu scroll to SI and press OK 2 Select General and press OK 3 Select Language and press OK 4 Scroll 7 H to select a language then press OK Owner number The phone numbers assigned to your SIM card are saved in Owner number if this is allowed by the card To view edit or the numbers 1 Press Menu scroll to SI and press OK 2 Select General and press OK 3 Select Owner number and press OK See Phonebook p 13 on how to add names numbers To edit or delete an existing entry select it and press Options then select Edit or Delete and press OK Block function gt You can disable functions to simplify use of the phone Press Menu scroll to PP and press OK Select General and press OK Select Block function and press OK Select each function you want to disable and press Off Press Save to confirm ee a 21 English Network setup If Automatic default is selected your service provider is selected automatically if this is within range available in your area If you select Manual you can select a network that has a roaming agreement with your service provider Contact your service provider for more information 1 Press Menu scroll to Pad and press OK 2 Select General and press OK 3 Select Network setup and press OK 4 Select one of the following options and press OK to confirm Network is selected automatically A list of available
42. tional numbers Int except home User can not call international numbers except to the country associated with the SIM card a ra Incoming calls Press OK then select All calls User can dial out but not receive incoming calls When roaming User can not receive incoming calls while roaming operating in other networks Cancel all Cancel all call barring password needed Messages 1 Press Menu scroll to SI and press OK 30 English 2 Select Messages and press OK 3 Select one of the following options and press OK Predictive text gt Select On and press OK to enable Predictive text eZiType see Entering text i hf Write speed gt You can change the speed at which keyboard characters repeat before the cursor moves onto the next character Select Fast Normal or Slow and press OK Delete Select Delete Inbox to delete all messages in Inbox Press Yes confirm or No to discard changes Select Delete Outbox to delete all messages in Outbox Press Yes confirm or No to discard changes Select Delete all to delete all messages at the same time Press Yes confirm or No to discard changes Memory status Displays the percentage of memory space used on the SIM card and in the phone memory Phone memory can store up to 450 messages Storage 1 Select SIM default to store messages on the SIM card or Phone to store messages in the phone memory 2 Press OK to confirm Cell information You can receiv
43. ttery The SIM card holder is located behind the battery 1 Remove the battery cover and the battery if it is already installed Insert the SIM card by gently sliding it into the holder Make sure that the SIM card s contacts are facing inwards and that the cut off corner is pointing downwards Take care not to scratch or bend the contacts on the SIM card 3 Insert the battery by sliding it into the battery compartment with the contacts facing upwards to the left 4 Replace the battery cover English Charging Only use batteries charger and accessories that have been approved for use with this particular model Connecting other accessories may be dangerous and may invalidate the phone s type approval and guarantee When the battery is running low 7 is displayed and a warning signal is heard To charge the battery connect the mains adapter to a wall socket and to the charging socket LF fl is displayed briefly when the charger is connected to the phone and a when it is disconnected The battery charge indicator will be animated while charging It takes approximately 3 hours to fully charge the battery Is displayed on the screen when charging is completed If the phone Is turned off when the charger is connected to the phone only the battery charge indicator will be shown on the display Note To save power the LCD backlight goes off after a while Press any key to illuminate the display Full battery capacity wi
44. with Clear 2 Press a to dial Press Abort to cancel dialling 3 Press wn to end the call Tip For international calls always use before the country code for best operation Press twice for the international prefix Making a call from the Phonebook 1 Press Name to open the phonebook 2 Use the arrow keys Sa0e7 e to scroll through the phonebook or quick search by pressing the key corresponding to the first letter of the entry see Entering text 5 p 7 3 Press Call to dial the selected entry or press Back to return to standby mode Receiving a call To answer an incoming call when the fold is closed open the fold To answer an incoming call when you have set Open to answer to Off see Settings Calls Answer mode p 28 1 Open the fold and press m to answer or press Silent to switch off the ring signal and then Reject to reject the call busy signal Alternatively press ea to reject the call directly 2 Press ea to end the call Tip Press and hold or to temporary switch off the ring signal without opening the fold English Volume control Use the side keys to adjust the sound volume during a call The volume level is indicated on the display If you use hearing aid or have hearing difficulties when using the telephone in noisy environment you can customize the phone s audio settings see Settings Sound Audio setup p 23 Entering text gt Text Is entered by pressing the nume
45. y call the receiver need to press K If the receiver doesn t press J within 60 seconds after answering the call will be disconnected and the next number in sequence will be called If the receiver press J within 60 seconds the call is confirmed and no further call attempts will be made emergency sequence interrupted 12 English Phonebook The phonebook can store 300 entries with 3 phone numbers in each entry Creating a phonebook entry 1 Press Menu scroll to Gi and press OK 2 Select New contact and press Add 3 Enter a R Name for the contact see Entering text odi Ds Delete with Clear 4 Use NA P to select Mobile number A Home number or ll Office number and enter the phone number s including the area code then press Save 5 Press w to return to standby mode Tip For international calls always use before the country code for best operation Press twice for the international prefix Creating ICE entry In Case of Emergency With this additional information and medical information first responders can access this information from the victim s phone in case of emergency In the event of a trauma it Is critical to have this information as early as possible which can increase the chances of survival All fields are optional but the more information provided the better See CE In Case of Emergency p 15 on how to configure your ICE information Managing phonebook entries 1
46. you may need to subscribe to them Operating environment Follow the rules and laws that apply wherever you are and always turn off the unit whenever its use is prohibited or can cause interference or hazards Only use the unit in its normal user position This unit complies with guidelines for radiation when it is used either in a normal position against your ear or when it is at least 1 5 cm from your body If the unit is carried close to your body in a case belt holder or other holder these holders should not contain any metal and the product should be placed at the distance from your body specified above Make sure that the distance instructions above are followed until the transfer is complete Parts of the unit are magnetic The unit can attract metal objects Do not keep credit cards or other magnetic media near the unit There is a risk that information stored on them can be erased Medical units The use of equipment that transmits radio signals for example mobile phones can interfere with insufficiently protected medical equipment Consult a doctor or the manufacturer of the equipment to determine if it has adequate protection against external radio signals or if you have any questions If notices have been put up at health care facilities instructing you to turn off the unit while you are there you should comply Hospitals and other health care facilities sometimes use equipment that can be sensitive to external radio signal
Download Pdf Manuals
Related Search