Philips 3000 series 26PFL3606H 26" HD-Ready Black
Contents
1. Computer connection issues The computer display on the TV is not stable e Check that your PC uses the supported resolution and refresh rate e Set the TV picture format to unscaled Contact us f you cannot resolve your problem refer to the FAOs for this product at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country as isted in the Addendum VY Warning Do not attempt to repair the product yourself This may cause severe injury irreparable damage to your product or void your warranty Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 37 English 10 Index A age rating 20 analogue channels fine tune 26 language change 20 audio language 20 C CAM enable 31 Insert 31 care 5 channels channel list 10 favourites 16 hide or unhide 16 install automatic 25 install manual 25 rearrange 26 rename 26 reorder 26 switch 10 update 25 channels fine tune analogue 26 child lock 20 clock 18 common interface 31 computer see PC 30 Conditional Access Module 31 connect connect device 28 connect PC 30 connect USB 21 connectors 28 30 controls 7 38 EN D demo 24 devices watch 10 digital channels digital radio 23 language change 20 subtitles 21 dimensions 35 E EasyLink e2. EN English 2 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire e Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times Never insert objects into the ventilation slots or other openings on the TV When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 25 kg or 55 Ibs When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight
3. Select Reorder then press OK A LW Select the channel to rearrange then press OK L gt The selected channel is highlighted b Move the highlighted channel to its new location then press OK 6 Press OPTIONS 7 Select Done reordering then press OK Test digital reception You can check the quality and signal strength of digital channels This allows you to reposition and test your antenna or satellite dish 1 Press ff 2 select Setup gt Channel settings gt Channel installation gt Digital Reception test then press OK o J Enter the frequency to test then press OK Select Search then press OK Un A When the channel is found select Store then press OK Note Ifthe signal quality and strength is poor reposition the aerial or satellite dish and retest e f you still have problems with the reception of your digital broadcast contact a specialised installer Access CAM services 1 Insert and activate the CAM see Insert and activate a CAM on page 31 2 Press OPTIONS 3 Select Common interface Applications provided by the digital TV service operator are displayed Note This menu option is available only if the CAM is inserted and activated correctly EN 27 English 7 Connect devices This section describes how to connect devices with different connectors For the location of these connectors on your TV se
4. Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Computer formats e Resolution refresh rate 640x480 60 800x 600 60 e 1024 x 768 60 e 1280 x 720 60 e 1280 x 768 60 e 1280 x 1024 60 Hz e 1360 x 768 60 Hz e 1680 x 1050 60 Hz For Full HD only e 5920 x 1080 60 Hz For Full HD only Video formats e Resolution refresh rate e 480i 60 Hz e 480p 60 Hz e 5761 50 Hz e 576p 50 Hz e 720p 50 Hz 60 Hz e 1080i 50 Hz 60 Hz e 1080p 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz 34 EN Multimedia Supported storage device USB only NTFS FAT or FAT 32 USB storage devices are supported e Supported multimedia file formats Images JPEG e Audio MP3 Tuner Reception Transmission e Antenna input 5ohm coaxial IEC75 DVB DVB Terrestrial DVB T MPEGA DVB C TV system DVB COFDM 2K 8K PAL B G D K SECAM B G D K L L e Video playback NTSC SECAM PAL e Tuner Bands Hyperband S channel UHF VHF Remote control Type PFO1E11B e Batteries 2 x AAA LRO3 type Power e Mains power 220 240V 50 60Hz Standby power lt 0 3 W e Ambient temperature 5 to 40 degrees Celsius e For power consumption see the product specifications at www philips com sup
5. All favourite channels are marked by an asterisk when you view the channel grid Manage the favourites list 1 while you watch TV press Q FIND L gt The channel matrix menu appears Press iz OPTIONS Select Select list gt All then press OK Press z OPTIONS Select Mark as favourite or Unmark as favourite then press OK L gt The channel is added or removed from the favourite list VA WN Note All favourite channels are marked by an asterisk in the channel grid Use the Electronic Programme Guide The programme guide is an on screen guide available for digital channels It allows you to e View a list of digital programmes being broadcast e View upcoming programmes e Group programmes by genre Set reminders when programmes start e Setup preferred programme guide channels Switch on EPG 1 Pes 2 select Programme guide then pressOK L gt The programme guide appears displaying information about the scheduled programmes Note Programme guide data is available only in selected countries and can take some time to load Change programme guide options You can set or clear reminders change the day and access other useful options in the programme guide options menu 1 Press ff Select Programme guide then press OK 2 J Press OPTIONS L gt The programme guide menu appears 4 Select one of the following options then press OK e
6. Find channel then press OK e If you know the three digit frequency of the channel enter it e To search select Search then press OK 3 When the channel is found select Lane then press OK o store the channel as a new number select Store as new channel then press OK e To store the channel as the previously selected channel select Store current channel then press OK Step 3 Fine tune analogue channels 1 Press ff 2 select Setup gt Channel settings gt Channel installation gt Analogue manual install gt Fine tune then press OK 3 Press A V to fine tune the channel 26 EN Rename channels You can rename channels The name appears when you select the channel 1 while you watch TV press Q FIND L gt The channel matrix menu is displayed 2 Select the channel to rename 3 Press OPTIONS L gt The channel options menu appears 4 Select Rename channel then press OK L gt A text input box appears 5 Press A V 4b to select each character then press OK 6 When the name is complete select Done then press OK Tip Press Aa to change an uppercase letter to a lowercase letter and vice versa Rearrange channels After you install channels you can rearrange the order in which they appear 1 While you watch TV press Q FIND L gt The channel matrix menu is displayed 2 Press OPTIONS L gt The channel options menu appears
7. Select Setup gt TV settings gt Preferences gt Clock gt Time zone CON BAWMBRW N n fe Press fft to exit Select your time zone Note y AW N Press OK to confirm If your selected country supports digital broadcast the clock displays the time data from your TV service z operator as priority Use daylight saving Note This option is only available if you select Auto clock mode gt Manual Press ff 1 2 Select Setup gt TV settings gt P 8 Preferences gt Clock gt Daylight saving then press OK 3 Select Standard time or Daylight saving time then press OK Use timers You can set timers to switch the TV to standby at a specified time Tip Set the TV clock before you use timers Automatically switch the TV to standby sleep timer Sleep timer switches the TV to standby after a pre defined duration Tip You can switch off your TV earlier or reset the sleep timer during the countdown Press ff Select Setup gt TV settings gt Preferences gt Sleep timer L gt The Sleep timer menu appears Ne 3 Select a value between zero and 180 minutes Ly Ifyou select zero the sleep timer switches off 4 Press OK to switch on the sleep timer The TV switches to standby after the specified time Lock unsuitable content You can prevent your children from watching certain progra
8. Theatre e Clock Display or remove the time from the TV and set clock options Start a TV demo You can use demonstrations to better understand the features of your TV Some demos are not available on certain models Available demos are displayed in the menu list While you watch TV press ff Select Setup gt Watch demo OK Select a demo and press OK to view it WN To exit press Reset the TV to factory settings You can restore the default picture and sound settings of your TV The channel installation settings remain the same 1 Press fi 2 Select Setup gt TV settings gt Factory settings then press OK 3 if you are prompted to enter a code enter the child lock code see Set or change code on page 19 L gt A confirmation message is displayed 4 Press OK to confirm 6 Install channels The first time you set up your TV you are prompted to select a menu language and to install TV and digital radio channels if available Afterwards you can re install and fine tune channels Automatically install channels You can search and store channels automatically Step 1 Select your menu language 1 Press ff 2 Select Setup gt TV settings gt Preferences gt Menu language then guag press OK J Select a language then press OK Step 2 Select your country Select the country where you are installing the TV The available channels for the co
9. and save settings The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device Sound issues There is a picture but sound quality is poor Note fno audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to 0 e Check that the sound is not muted There is a picture but the sound quality is poor e Check that the sound settings are correctly set There is a picture but sound comes from one speaker only e Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device f the TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again e fthere are intermittent sound disruptions check that output settings from the HDMI device are correct e fyou use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected to AUDIO IN mini jack only
10. section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor ens The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the TV lock feature e Enter 8888 The TV menu is in the wrong language e Change the TV menu to your preferred anguage When turning the TV on off to standby you hear a creaking sound from the TV chassis e No action is required The creaking sound is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance Cannot remove e sticker banner displayed on the TV To remove the logos and images set the location of your TV to home 1 Press ff 2 Select Setup gt TV settings gt Preferences gt Location 3 Select Home and press OK 36 EN TV channel issue
11. Adjust menu If EasyLink or EasyLink autostart are selected access the adjust menu to switch the TV audio 1 While you watch TV press Ht ADJUST 2 Select Speaker then press OK J Select one of the fo lowing then press OK TV On by default Stream TV audio through TV and the connected HDMI CEC audio device until the connected device switches to system audio control TV audio is then streamed through the connected device Amplifier Stream audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio continue to stream from the TV speakers If EasyLink autostart was enabled the TV prompts the connected device to switch to system audio mode Retain picture quality If your TV picture quality is affected by the picture processing features of other devices switch on Pixel Plus Link 1 Connect an HDMI CEC compliant device to the HDMI connector 2 Configure the HDMI CEC compliant device properly see the device user manual Press fft Select Setup gt TV settings gt EasyLink gt EasyLink Select On then press OK Select Pixel Plus Link gt On then press OK DU AW Use a Kensington lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington lock between the slot and a permanent object such as a heavy table EN 33 English 8 Product information
12. Press the Numeric buttons to enter a page number Press I or PI to view the next or previous page Press the Colour buttons to select a colour coded item e Press gt BACK to return to a previously viewed page 3 Press TEXT to exit teletext Note For UK users only Some digital TV channels offer dedicated digital text services for example BBC1 EN 11 English 5 Use more of your TV Access TV menus Menus help you to install channels change picture and sound settings and access other features 1 Press A The menu screen appears sp 9 2 Select one ofthe following then press OK e Watch TV If a source other than antenna is selected switch back to the antenna source Programme guide Access the electronic programme guide Browse USB If a USB device is connected access the content browser Setup Access menus to change picture sound and other settings 3 Press fft to exit 12 EN Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually Note While you watch TV or external devices press tl ADJUST then select Smart picture or Smart sound for quick access to picture and sound settings Use smart picture Use smart picture to apply pre defined picture settings 1 Press tit ADJUST 2 Select Smart picture then pre
13. Register your product and get support at www philips com welcome 26PFL3606 22PFL3606 19PFL3606 EN User manual PHILIPS Q Contact information Belgi Belgique 0800 80 190 Gratis Gratuit Q CHAT www philips com support bbArapua 00800 11 544 24 Ceska republika 800 142 840 Bezplatny hovor Danmark 3525 8759 Lokalt opkald Q CHAT www philips com support Deutschland 0800 000 7520 kostenfrei Q CHAT www philips com support EM 8a 0 0800 3122 1280 KArjon xwpic xp con Espa a 900 800 655 Tel fono local gratuito solamente para clientes en Espa a Q CHAT www philips com support Estonia 8000100288 kohalik k ne tariifi France 0805 025 510 num ro sans frais Q CHAT www philips com support Hrvatska 0800 222778 free Ireland South 1 800 7445477 North 0 800 331 6015 Italia 800 088774 Numero Verde KasakcraH 7 727 250 66 17 local Latvia 80002794 local Lithuania 880030483 local Luxemburg Luxembourg 080026550 Ortsgespr ch Appel local Magyarorsz g 06 80 018 189 Ingyenes h v s Nederland 0800 023 0076 Gratis nummer Norge 22 70 81 11 Lokalsamtale Osterreich 0800 180 016 Polska 00800 3111 318 Portugal 0800 780 902 Chamada Gr tis Poccna 495 961 1111 8800 200 0880 6Gecn aruei 3BOHOK no Poccun Romania 0800 894910 Apel gratuit 0318107125 Apel local Cp6nja 381 114 440 841 Lokalni poziv Slovensko 0800 004537 Bezplatny hovor Slovenij
14. Set reminder Clear reminders Set or clear programme reminders e Change day Set the programme guide day e More info Display programme information EN 17 English Search by genre Search TV Display the TV clock programmes by genre e _ Scheduled reminders List 1 While you watch TV press programme reminders Only OPTIONS available for upcoming programmes L gt The options menu is displayed e Acquire EPG data Update the 2 Select Clock latest programme guide information 3 Press OK Display the TV clock Nore To disable the clock repeat the procedure You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Change the clock mode 1 Press Set the TV clock manually 2 Select Setup gt TV settings gt In some countries you need to set TV clock Preferences gt Clock gt Auto clock manually 3 Select Automatic or Manual then Press ft press OK Select Setup gt TV settings gt Preferences gt Clock Change the time zone Select Auto clock then press OK Note Select Manual then press OK This option is only available if you select Auto clock ect Time or Date then press OK gt Automatic in countries with clock transmission data Press the Navigation buttons to set the time or date Select Done then press OK Press ft
15. a 080080254 lokalni klic Sverige 08 5792 9100 Lokalsamtal Suisse Schweiz Svizzera 0800 002 050 Schweizer Festnetztarif Tarif r seau fixe France Suomi 09 2311 3415 paikallispuhelu Tirkiye 0800 261 3302 Sehirici arama United Kingdom 0870 911 0036 toll free YkpaiHcbka 0 800 500 697 This information is correct at the time of print For updated information see www philips com support Contents 1 Notice 2 2 Important 4 3 YourTV 7 TV controls 7 Remote control 7 Remote control usage 8 4 Use your TV 9 Switch your TV on 9 Switch your TV to standby 9 Switch your TV off 9 Switch channels 10 Watch connected devices 10 Adjust TV volume 11 Use teletext 11 5 Use more of your TV 12 Access TV menus 12 Change picture and sound settings 12 Use the universal access menu 15 Use advanced teletext features 16 Create and use lists of favourite channels 16 Use the Electronic Programme Guide 17 Display the TV clock 18 Use timers 19 Lock unsuitable content 19 Change language 20 Play photos and music on USB storage devices 21 Listen to digital radio channels 23 Update the TV software 23 Change TV preferences 24 Start aTV demo 24 Reset the TV to factory settings 24 6 Install channels 25 Automatically install channels 25 Manually install channels 25 Rename channels 26 Rearrange channels 26 Test digital reception 27 Access CAM services 27 7 Connect devices 28 Back connections 28 Side c
16. broadcast special audio adapted for people who are visually impaired The normal audio is mixed with extra commentary Select an option Off Turn off visually impaired audio Speakers Hear visually impaired audio from speakers only Headphone Hear visually impaired audio from headphones only Speaker headphone Hear visually impaired audio from both speakers and headphone Volume visually impaired Adjust the volume of visually impaired audio To exit press EN 15 English Use advanced teletext features Access the teletext options menu Access the teletext features through the teletext options menu 1 Press TEXT L gt The teletext screen appears 2 Press OPTIONS L gt The teletext options menu appears J Select one of the following options then press OK Freeze page Unfreeze page Freeze unfreeze the current page Dual screen Full screen Switch between full screen and dual screen teletext e T O P overview Switch on Table of Pages teletext broadcasts Enlarge Normal view Switch between enlarged and normal view of teletext pages Reveal Hide or reveal hidden information on a page such as solutions to riddles or puzzles e Cycle subpage If subpages are available automatically display each subpage in sequence e Languages Select a language for teletext Select teletext subpages A teletext page can contain se
17. e Philips EasyLink switch it off 1 Press 2 Select Setup gt TV settings gt EasyLink gt EasyLink 3 Select On or Off then press OK Set TV speakers to EasyLink mode If you connect an HDMI CEC compliant device that includes speakers you can choose to hear the TV from those speakers instead of the TV speakers When you play content from an EasyLink compliant home theatre if you want to mute the TV speakers automatically turn on EasyLink mode 1 Connect an HDMI CEC compliant device to the HDMI connector 2 Connect an audio cable from the SPDIF OUT connector to the EasyLink compliant device s AUDIO IN connector see Back connections on page 28 J Configure the HDMI CEC compliant 8 P device properly see the device user manual Press ff Select Setup gt TV settings gt EasyLink gt EasyLink Select On then press OK Select TV speakers then press OK COND US Select one of the following then press OK Off Switch off TV speakers On Switch on TV speakers e EasyLink Stream TV audio through the connected HDMI CEC device Switch the TV audio to the connected HDMI CEC audio device through the adjust menu e EasyLink autostart Turn off TV speakers automatically and streams TV audio to the connected HDMI CEC audio device Note To mute the TV speakers select TV speakers gt Off Select speaker output with
18. e Press CH or CH on the remote control e Press CH on the T V 2 Oo View channel preview You can view a preview of all available channels with the channel grid e Press Q FIND L gt The channel grid appears To preview a channel select it L gt To watch a channel select it then press OK Watch connected devices Note Before you select a device as a source switch the device on Select a device from the source list 1 Press amp SOURCE A e 2 P A ng as Other ways to switch channels Enter a channel number using the Numeric buttons e Press D BACK on the remote control to return to the previous channel Note When you use a favourite list you can only select those channels in the list see Create and use lists of favourite channels on page 16 10 EN L gt The source list appears 2 Press amp V to select a device Press OK to confirm your choice The TV switches to the selected device Adjust TV volume Press on the remote control Press lt on the TV amna To mute or unmute sound Press amp to mute the sound Press amp again to restore the sound Use teletext 1 Press TEXT L gt The main index page appears 2 selecta page with one of the following
19. e or repeatedly Shuffle on Shuffle off Play songs in sequence or at random Show info Display the file name View a slideshow with music You can view a picture slide show with background music Select an album of songs Press OK Press to return to the USB content browser Select an album of pictures Press OK L gt The slideshow begins VA WN oO To exit press D Disconnect a USB storage device Caution Follow this procedure to avoid damage to your USB storage device 1 Press to exit the USB browser 2 Wait for five seconds then disconnect the USB storage device Listen to digital radio channels 1 Press a FIND L gt The channel matrix menu is displayed 2 Press OPTIONS then select Select list gt Radio L gt The radio channel grid appears J selecta radio channel and press OK to listen Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available Ways to update the TV software You can update the TV software in one of the following ways A with a USB storage device B when prompted through digital broadcasts or C after being prompted through digital broadcasts A with a USB storage device To update with a USB storage device you need e A computer with Internet access e A USB storage device Step 1 Check the current sof
20. e the quick start guide More examples of connections with other devices are provided in the Quick Start Guide Note You can use different types of connectors to connect a device to your TV Tip After connection for easy access to your device add it to the home menu press fft then select Add new device Back connections 1 TV ANTENNA Signal input from an antenna cable or satellite 70 Ir TV ANTENNA 28 EN Q EXT 1 RGB and CVBS Analogue audio and video input from analogue or digital devices such as DVD players or game consoles EXT RGB CYBS COO OON COO OD CO OO OUD OO OO 3 SPDIF OUT Digital audio output to home theatres and other digital audio systems SPDIF OUT SERV U For use by service personnel only G PC IN VGA and AUDIO IN Audio and video input from a computer VGA AUDIO IN LEFT RIGHT GA DVI 6 HDMI 1 Digital audio and video input from high definition digital devices such as Blu ray players HDMI I Connections via DVI or VGA require an additional audio cable see Connect a computer on page 30 e EXT 2 Y Pb Pr and AUDIO L R Analogue audio and video input from analogue or digital devices such as DVD players or game consoles N Headphone Stereo audio output to headphones or earpho
21. election A V 4 Navigation buttons Navigate through menus and select items tt ADJUST e Access the menu to adjust settings Colour buttons e Select tasks or options Remote control usage When you use the remote control hold it close to the TV and point it at the remote control sensor Make sure that the line of sight between the remote control and TV is not blocked by furniture walls or other objects PHILIPS 4 Use your TV This section helps you perform basic TV operations Switch your TV on e Press the power switch on the TV L gt There is a short delay before the TV responds OOS If the TV is in standby e Press Standby On on the remote control Switch your TV to standby e Press Standby On on the remote control again The remote control sensor on the TV switches to red Switch your TV off e Press the power switch on the TV again L gt The remote control sensor on the T V switches off L gt Though the TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet or turn off the power switch Note e If you cannot locate your remote control and want to switch on the TV from standby press CH on the TV EN 9 English Switch channels
22. go Reconnect the TV to the power outlet Turn on the TV and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use this action deactivates digital services UAU E COMMON INTERFACE EN 31 English Access CAM services 1 Insert and activate the CAM see Insert and activate a CAM on page 31 2 Press OPTIONS 3 Select Common interface Applications provided by the digital TV service operator are displayed Note This menu option is available only if the CAM is inserted and activated correctly Use Philips EasyLink Get the most out of your HDMI Consumer Electronic Control CEC compliant device with Philips EasyLink enhanced control features If your HDMI CEC compliant devices are connected through HDMI you can control them at the same time with your TV remote control To enable Philips EasyLink you need to Connect an HDMI CEC compliant device through HDM Configure the HDMI CEC compliant device properly e Switch on EasyLink Note The EasyLink compliant device must be switched on and selected as the source Philips does not guarantee 100 interoperability with all HDMI CEC devices 32 EN Switch on or off EasyLink When you play an HDMI CEC compliant device the TV switches on from standby and switches to the correct source Note e f you do not intend to us
23. in 2012 television services in the UK will go completely digital TV region by TV region Please see the next page to find out when your area switches to digital Digital UK is the independent non profit organisation leading the process of digital TV switchover in the UK Digital UK provides im partial information on what people need to do to prepare for the move to digital and when they need to do it EN How the switchover affects your TV equipment Your new TV has a digital tuner built in which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket check if you can get digital TV through your aerial now or whether you ll have to wait until switchover at www digitaluk co uk When the TV switchover happens in your area there are at least two occasions when you will need to re tune your TV in order to continue receiving your existing TV channels and also to pick up new ones get set for digital V j Digital UK the body leading the digital TV How to re tune switchover will advise you when you need to 1 Press ft on the remote control re tune during the switchover 2 Select Setup and press OK If you do not re tune your channels when 3 Select Search for channels and press OK advised to do so by Digital UK you may lose 4 Select Reinstall channels and press OK some or all of your channels until you do 5 Select your country UK and press OK re tune You should re tu
24. lcohol chemicals or household cleaners on the TV Risk of damage to the TV screen Never touch push rub or strike the screen with any object To avoid deformations and colour fading wipe off water drops as soon as possible e EN 5 English Disposal of your old product and batteries es Your product is designed and manufactured with high quality materials and components which can be recycled and reused pA When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health A Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health Environmental efforts Philips continuously focuses on lowering the environmental impact of its innovative consumer products We aim our efforts towards environmental improvements during manufactu
25. lete EN 23 English 4 if you do not want to update the software select Setup gt Software settings gt Clear announcement then press OK Note e f you skip the update you can update it manually later see C Check for updates through digital broadcasts on page 24 C Check for updates through digital broadcasts You can check if there are updates available through digital broadcasts 1 Press ff 2 select Setup gt Software settings gt Check on major updates 3 fan update is available follow the on screen instructions to start the update The TV restarts after the software update is complete Change TV preferences Use the preferences menu to customise your TV settings 1 Press ff 2 Select Setup gt TV settings gt P g Preferences J Select one of the following then press OK e Menu language Select a menu language e Sleep timer Switch the TV to standby after a pre defined duration e Location Optimise TV settings for your location home or shop e Volume bar Display the volume bar when you adjust the volume 24 EN Auto switch off To conserve energy set the TV to switch off automatically after a period of inactivity Channel information size Change the type of information that is displayed when you switch channels Audio out delay Automatically sync the image on your TV to the audio from a connected Home
26. matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different e If you need to store the TV disassemble the stand from the TV Never lay the TV on its back with the stand installed Risk of injury fire or power cord damage Never place the TV or any objects on the power cord e To easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C or 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time isplays If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning Clean the TV and frame with a soft damp cloth Never use substances such as a
27. mmes or channels by locking the TV controls Set or change code 1 Press ff 2 select Setup gt Channel settings gt Child lock 3 Select Set code or Change code L gt The Set code Change code menu appears 4 Enter your code using the Numeric buttons L gt Follow the on screen instructions to create or change your PIN code Tip e f you forget your code enter 8888 to override any existing codes EN 19 English Lock or unlock one or more channels 1 Press gt Setup gt Channel settings gt Child lock gt Channel lock A list of channels is displayed 2 Select the channel that you want to lock or unlock then press OK L gt The first time you lock or unlock a channel you are prompted to enter your PIN code J Enter your code and press OK L gt Ifthe channel is locked a lock icon is displayed 4 Repeat the process to lock or unlock more channels D To activate the locks switch the TV on and off L gt When you switch channels with CH or CH the locked channels are skipped L gt When you access the locked channels from the channel grid you are prompted to enter your PIN code Set parental ratings Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings lower than your child s age 1 Press A 2 Select Setup gt Channel settings gt Child lock gt Pare
28. n sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support for service or repairs LA AN CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO e Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 99976 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the Electro Magnetic Field EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philip
29. nable 32 hear from other speakers automatically 32 picture quality retain 33 Electronic Programme Guide 17 environmental care end of use 6 recycle 6 while you watch TV 6 EPG menu 17 F factory settings 24 favourites list add 16 H HDMI 28 hearing impaired 15 high definition HD content 28 home menu 12 home mode 24 l install install channels install channels automatic 25 install channels manual 25 K kensington lock 33 L language audio 20 menu 20 subtitles 21 location home or shop 24 M multimedia 21 multimedia play files 21 mute TV speakers 32 P PC display resolutions 34 picture format 14 picture settings 13 Pixel Plus link 33 position the TV 24 power 34 R recycle 6 reinstall TV 25 remote control overview 7 rename channels 26 reorder channels 26 S screen care 5 settings picture 13 sound 15 shop mode 24 sleeptimer 19 smart picture 12 smart sound 14 software digital broadcast update 24 version 23 sound settings 15 specifications 34 standby 9 subtitle language 21 subtitles 21 switch 9 switch TV on or off 9 T teletext dual screen 16 enlarge 16 subpages 16 Table Of Pages 16 troubleshoot 36 U universal access 15 V visually impaired 15 volume 11 EN 39 English Information about how to re tune your TV during the TV switchover Television in the UK is going digital bringing us all more choice and new services Starting in late 2007 and ending
30. ne your TV every 6 Select Antenna DVB T and press OK few months to check for any new channels 7 Select Start and press OK If you choose to connect your TV to satellite or The installation can take several minutes cable with a digital box then it will not be affected by switchover and you won t need to When the installation is complete press OK re tune Your TV is now retuned If you have any questions please contact your If you are missing any channels it may be equipment supplier or call Digital UK on that they are not available in your area or 0845 6 50 50 50 or visit www digitaluk co uk that your aerial needs upgrading When does switchover happen Nw al Copeland switches on October 17 2007 S A Ve T Shetland Islands F4 v STV Central 2010 11 Border A a Central 11 Wales A UV dh 5 Yorkshire 2011 Visit us at digitaluk co uk Call us on 0845 6 50 50 50 2009 10 London 2012 Meridian 2012 West Country s v Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends Rates may vary for calls from non BT lines EN 41 English PHILIPS 2011 Koninklijke Philips Electronics N V All rights reserved
31. nes EN 29 English Side connections 1 USB Data input from USB storage devices USB dum O COMMON INTERFACE Slot for a Conditional Access Module CAM 4 COMMON INTERFACE 30 EN Connect a computer Before you connect a computer to the TV Set the screen refresh rate on your computer to 60Hz Select a supported screen resolution on your computer Connect a computer with one of the following connectors Note Connections via DVI or VGA require an additional audio cable e HDMI cable AUDIO IN LEFT RIGHT VGA DVI HDMI cable and HDMI DVI adaptor AUDIO IN LEFT RIGHT VGA cable AUDIO IN LEFT RIGHT VGA DVI Use a Conditional Access Module A Conditional Access Module CAM is provided by digital TV service operators to decode digital TV channels Note e Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module Insert and activate a CAM Caution Be sure to follow the instructions described below Wrong insertion of a CAM may damage both the CAM and your TV 1 Switch off the TV and disconnect it from the power outlet 2 Following the directions printed on the CAM gently insert the CAM into the COMMON INTERFACE at the side of the TV 4 Push the CAM in as far as it will
32. ntal rating Ls A code setup screen appears 3 Enter your code using Numeric buttons L gt The rating menu appears Select an age rating then press OK Un A Press fft to exit 20 EN Change language Depending on your broadcaster you can change the audio language subtitle language or both for a TV channel Multiple audio languages subtitles or both are broadcast through teletext or DVB T digital broadcasts Dual sound broadcasts With digital broadcasts you can select a subtitle language Change menu language 1 Press ff 2 Select Setup gt TV settings gt Preferences gt Menu language then guag press OK J Select a language then press OK Change audio language You can choose an audio language if it is available from your broadcaster For digital channels multiple languages may be available For analogue channels two languages may be available 1 While you watch TV press OPTIONS 2 For digital channels select Audio language select the language then press OK 3 For analogue channels select Dual I II select either language then press OK Show or hide subtitles 1 While you watch TV press SUBTITLE 2 Select one of the following then press OK Subtitles on Always display subtitles e Subtitles off Never display subtitles On during mute When audio is muted display subtitles Note Repeat this procedure to enable sub
33. of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage e Parts of this product may be made of glass Handle with care to avoid injury and damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support Educate children about the dangers of climbing on furniture to reach the TV Risk of swallowing batteries e The product remote control may contain a coin type battery which can be swallowed Keep the battery out of reach of children at all times Risk of overheating e Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk of damage to the TV e Before you connect the TV to the power outlet ensure that the power voltage
34. onnections 30 Connect a computer 30 Use a Conditional Access Module 31 Use Philips EasyLink 32 Use a Kensington lock 33 8 Product information 34 Supported display resolutions 34 Multimedia 34 Tuner Reception Transmission 34 Remote control 34 Power 34 Supported TV mounts 35 Product specification 35 9 Troubleshooting 36 General TV issues 36 TV channel issues 36 Picture issues 36 Sound issues 37 HDMI connection issues 37 Computer connection issues 37 Contact us 37 10 Index 38 EN 1 English 1 Notice 2011 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system f the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Terms of warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself e Use the TV and accessories only as intended by the manufacturer The cautio
35. port Supported TV mounts For 26PFL3xx6 To mount the TV purchase a Philips TV mount or a compatible TV mount Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage Before you mount perform these steps 1 To prevent damage to cables and connectors leave a clearance of at least 2 2 inches or 5 5cm from the back of the TV 2 For selected models remove the wall mount plugs from the back of the TV J Make sure that your mounting bolts follow these specifications TV screen Required Required mounting size pitch mm bolts inches 26 200x100 4xMA4 10 mm Product specification Design and specifications are subject to change without notice 26PFL3606H e Without TV stand e Dimension WxHxD 648 5 x 414 5 x 79 1 mm e Weight 6 2 kg e With TV stand e Dimension WxHxD 648 5 x 465 3 x 176 7 mm e Weight 6 5 kg 22PFL3606H e Without TV stand Dimension WxHxD 5294 x 3349 x 57 mm e Weight 3 84 kg e With TV stand Dimension WxHxD 529 4 x 3684 x 159 3 mm Weight 4 06 kg 19PFL3606H e Without TV stand Dimension WxHxD 462 8 x 2974 x 57 mm e Weight 294 kg e With TV stand Dimension WxHxD 462 8 x 3309 x 149 3 mm e Weight 3 13 kg EN 35 English 9 Troubleshooting This
36. r next photo e ito stop e To return press EN 21 English Change slide show settings 1 While you view a slide show press OPTIONS L gt The slide show options menu is displayed Select one of the following then press OK Start Stop slideshow Start or stop slideshow Slideshow transitions Set the transition from one picture to the next Slideshow frequency Select the display time for each photo e Repeat Play once View the pictures in the folder once only or repeatedly Shuffle off Shuffle on View the pictures in sequential order or at random e Rotate image Rotate photo e Show info Display the picture name date size and next picture in the slide show e _ Set as Scenea Set the selected picture as the TV wallpaper To return press d Note Rotate image and Show info appear only when the slideshow is paused Listen to music 1 2 22 In the USB browser select Music then press OK Select a music track or album then press OK to play To control play press the play buttons e bto play Ito pause e IK or Pl to play the previous or next track e lt 44 or PP to search forward or backward e ito stop EN Change music settings While you play music press OPTIONS to access one of the following settings then press OK Stop playback Stop music play Repeat Play a song onc
37. ring reduction of harmful substances energy efficient use end of life instructions and product recycling 3 Your TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome TV controls D 22 Adjust volume O CH Switch channels 3 Power Switch the TV on or off Remote control Ba aX iis 5 ta SN gt N Elo I e E L le om 8 m J 1 Zrons Bruv wxz9 KD SUBTITLE O TEXT D PHILIPS 4 Standby On e Switch the TV on or to standby O Play buttons Control video or music 3 a FIND e Access the menu to select a T V channel list 4 A Home e Access the home menu 5 IM CH CH Pl Previous Next e Switch channels or navigate through menu pages tracks albums or folders EN English 6 SOURCE Select connected devices 7 Mute e Mute or restore audio Volume e Adjust volume 0 9 Numeric buttons e Select channels SUBTITLE Enable or disable subtitles TEXT Enable or disable teletext OPTIONS e Access options for the current activity or selection gt Back e Return to the previous menu or exit a function OK Confirm an entry or s
38. s Previously installed channels do not appear in the channel list e Check that the correct channel list is selected No digital channels were found during the installation e Check that the TV supports DVB T DVB T Lite or DVB C in your country Some channels are not automatically installed on my TV During installation make sure that you select the country where you are installing the T V Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality f possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e f reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change
39. s confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Mains fuse UK only This TV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 104 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type 3 Refit the fuse cover Copyright K Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world I DOLBY DIGITAL PLUS Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories HIGH DEFINITION MULTIMEDIA INTERFACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries All other registered and unregistered trademarks are the property of their respective owners
40. ss OK J Select one of the following settings then press OK e Personal Apply your customised picture settings e Vivid Rich and dynamic settings ideal for daytime Natural Natural picture settings Cinema Ideal settings for movies Game Ideal settings for games e Energy saving Settings that conserve the most energy Standard Default settings that suit most environments and types of video e Photo Ideal settings for photos Custom Customise and store your personal picture settings Select Personal to apply these settings Manually adjust picture settings 1 Press ff elect Setup gt settings gt 2 Select Setup gt TV setting Picture then press OK J Select one of the following settings then press OK Smart picture Access predefined smart picture settings Reset Reset to factory default settings Contrast Adjust the intensity of backlight areas while the video contents are kept unchanged Brightness Adjust the intensity and details of dark areas e Colour Adjust colour saturation Hue Compensate for colour variations e Sharpness Adjust sharpness in the image Noise reduction Filter and reduce noise in an image Tint Adjust the colour balance in an image e Custom tint Customise tint setting Only available if Tint gt Custom is selected e Digital Crystal Clear Fine tune each pixel
41. table picture format If not widescreen is applied Auto fill For selected models Adjust the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC Auto zoom For selected models Enlarge the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC Super zoom Not for HD and PC mode Remove the black bars on the side of 4 3 broadcasts There is minimal distortion 4 3 Show the classic 4 3 format 14 EN Movie expand 16 9 Not for HD and PC mode Scale 4 3 format to 16 9 Wide screen Scale 4 3 format to 16 9 Unscaled For HD and PC mode only and in selected models only Allow maximum sharpness Some distortion may be present due to the broadcaster s systems Set your PC resolution to wide screen mode for best results LE Use smart sound Use smart sound to apply pre defined sound settings 1 Press Ht ADJUST 2 Select Smart sound then press OK J Select one of the following settings then press OK e Personal Apply the settings that were customised in the sound menu Standard Settings that suit most environments and types of audio e News Ideal settings for spoken audio such as news Cinema Ideal settings for movies Game Ideal settings for games e DRAMA Ideal settings for drama programmes Sports Ideal se
42. titles on each analogue channel Select Subtitles gt Subtitles off to disable subtitles Select a subtitle language in digital channels Note When you select a subtitle language in a digital TV channel as described below the preferred subtitle language set in the installation menu is temporarily overruled 1 while you watch TV press OPTIONS Select Subtitle language then press OK Select a subtitle language Aw N Press OK to confirm Play photos and music on USB storage devices Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device Connect a USB storage device to play photos or music stored on it Switch on the TV Connect the USB device to the USB port on the side of your TV Press ff Select Browse USB then press OK L gt The USB browser appears AW N View photos 1 Inthe USB browser select Picture then press OK 2 Select a photo or a photo album then press OK to view the photo enlarged to fill the TV screen e To view the next or previous photo press 4 3 To return press gt View a slide show of your photos 1 When a full screen image of a photo is displayed press OK L gt A slide show begins from the selected photo e Press the following buttons to control play e bto play e Ito pause e I or Pl to play the previous o
43. to match surrounding pixels This setting produces a brilliant high definition image Advance sharpness Enab superior picture sharpness Dynamic contrast Enhance contrast Medium setting is recommended Dynamic backlight Adjust brightness of the TV backlight to match lighting conditions MPEG artifact reduction Smooth out transitions on digital pictures You can switch this feature on or off Colour enhancement Make colours more vivid and improve the details in bright colours You can switch this feature on or off 0 Gamma Adjust the midtone intensity in the picture Black and white are not affected PC mode Adjust the picture when a PC is connected to the TV via HDMI or DVI Picture format Change the picture format Screen edges Adjust the viewing area when set to maximum you may see noise or the rough edge of an image Picture shift Adjust the picture position for all picture formats except for Auto zoom and Wide screen EN 13 English Change picture format 1 Press Ht ADJUST 2 Select Picture format then press OK 3 Select a picture format then press OK Summary of picture formats The following picture settings can be configured Note Depending on the format of the picture source some picture settings are not available Auto format For selected models Not for PC mode Automatically display the sui
44. ttings for sports programmes Manually adjust sound settings 1 2 Press ff Select Setup gt TV settings gt Sound then press OK L gt The Sound menu appears Select one of the following settings then press OK Smart sound Access predefined smart sound settings Reset Reset to factory default settings Clear sound Enhance the sound clarity Bass Adjust the bass level Treble Adjust the treble level Surround Switch on spatial sound Incredible Surround For selected models Enhanced spatial sound for increased surround effect Headphone volume For models with headphones Adjust headphone volume Auto volume leveling Automatically reduce sudden volume changes for example when switching channels Balance Adjust the balance of the right and left speakers Digital output format Select the type of digital audio output through digital audio output connector e PCM Convert non PCM audio type to PCM format e Multichannel Output audio to the home theatre Use the universal access menu You can switch on or off visually impaired and hearing impaired options for enhanced visual or audio cues 1 2 3 While you watch TV press ff Select Setup gt Channel settings gt Language Select one of the following options then press OK Hearing impaired Enable or disable hearing impaired subtitles Visually impaired Some digital TV channels
45. tware version 1 Press ff 2 Select Setup gt Software settings gt Current software inf L gt The current software information is displayed 3 Write down the software version number 4 To return press OK b To exit press D Step 2 Download and update the latest software version Connect a USB storage device Press fft Select Setup gt Update software Follow the instructions to load a file onto your USB storage device mm BWN Connect the USB storage device to your computer then double click the file L gt A Web page is launched 6 Follow the instructions in the Web page Ifthe current software version matches the latest software update file you do not need to update your TV software Ifthe current software version is smaller than the latest software update file download the latest software update file to the root directory of your USB device 7 Disconnect the USB storage device from the computer B Update when prompted through digital broadcasts If you receive digital broadcasts DVB T your TV can automatically receive software updates When your TV receives a software update it will prompt you to update the TV software 1 Press 2 Select Setup gt Software settings gt Announcement 3 ia message appears to prompt you to update your software follow the instructions to start the update The TV restarts after the software update is comp
46. untry are installed on the TV 1 Press A 2 Select Setup gt Search for channels then press OK 3 Select Reinstall channels then press OK L gt The country menu appears 4 Select your country then press OK L gt The channel installation guide begins b Select Start then press OK L gt All available channels are stored 6 To exit press OK Update the channel list You can enable automatic update of channels when your TV is in standby mode The channels stored in your TV are updated every morning according to the channel information in the broadcast 1 Press ff 2 select Setup gt Channel settings gt Channel installation gt Automatic channel update 3 Select On to enable the automatic update or select Off to disable it 4 To return press D Manually install channels This section describes how to search and store analogue TV channels manually Step 1 Select your system Note Skip this step if your system settings are correct 1 Press ff 2 select Setup gt Channel settings gt Channel installation gt Analogue Manual antenna installation gt System then press OK J Select the correct system for your country or region then press OK EN 25 English Step 2 Search and store new TV channels 1 Press ff 2 select Setup gt Channel settings gt Channel installation gt Analogue Manual antenna installation gt
47. veral subpages Subpages are displayed next to the main page number 1 Press TEXT L The teletext screen appears 2 Press Ior Plto select a teletext page J Press dor P to entera subpage Select T O P teletext broadcasts Jump from one subject to another without entering page numbers with Table Of Pages T O P teletext broadcasts T O P teletext broadcasts are available on selected TV channels 1 Press TEXT L gt The teletext screen appears Press z OPTIONS Select T O P overview then press OK The T O P overview appears 2 3 4 Selecta subject 5 Press OK to view the page Create and use lists of favourite channels You can create a list of your preferred TV channels so that you can find those channels easily View only the list of favourite channels 1 while you watch TV press Q FIND L gt The channel matrix menu is displayed 2 Press OPTIONS 3 Select Select list gt Favourites then press OK Only channels in the favourites list appear in the channel grid Note The favourites channel grid is empty until you add channels into the favourites list View all channels You can exit the favourites list and view all installed channels 1 While you watch TV press Q FIND L gt The channel matrix menu is displayed 2 Press OPTIONS 3 Select Select list gt All then press OK All channels are displayed in the channel grid Note
Download Pdf Manuals
Related Search