Home

Cobra MRF300 BT

image

Contents

1. fi English Call Log The most recent incoming and outgoing calls are recorded in the handset Call Log These can be used to select and dial a number To access a number in the Call Log press the Menu Function button in Standby mode then select the Call Log mode to arrive at the screen shown Ca OD es TaD ii To Select and Dial a Number pu 1 Use the Page Up and Page Down buttons to shift up 15555882300 a and down the list of entries 1555 600 ego z 2 Use the Up and Down Arrow buttons to scroll the pointer ISTE at the left of the screen to the desired entry 3 Press the Green Phone button to call the number NOTE While in Call Log mode you can see details of the selected entry by pressing the View Function button or Enter button Dial Number To enter a number you want to dial press the Menu Function button in Standby mode then select the Dial By Number mode to arrive at the screen shown To Enter a Number to be Dialed 1 Press and release the Function button under the first digit ENTER NUNBER of the phone number until the correct number appears above the flashing cursor 123 456 188 0e 2 Wait for the cursor to shift to the right or press the Enter button to shift the cursor 3 Enter the second digit of the phone number as in step 1 4 Repeat steps 1 and 2 until the complete number has been entered 5 Press the Green Phone button to call the number NOTE The number will appear on the scre
2. Enclose a description of what is happening with the product Include a typed or clearly printed name and address of where the product is to be returned with phone number required for shipment 4 Pack the product securely to prevent damage in transit If possible use the original packing material 5 Ship prepaid and insured by way of a traceable carrier such as United Parcel Service UPS or Priority Mail to avoid loss in transit to Cobra Factory Service Cobra Electronics Corporation 6500 West Cortland Street Chicago Illinois 60707 U S A 6 If the product is in warranty upon receipt of the product it will either be repaired or exchanged depending on the model Please allow approximately 3 4 weeks before contacting Cobra for status If the product is out of warranty a letter will automatically be sent with information as to the repair charge or replacement charge For any questions please call 773 889 3087 for assistance English
3. Handset Controls and Indicators 00000005 A2 Backlit LCD Liquid Crystal Display Screen 00000 A3 Product Featut8S vias enctacencr wee altho neta obe TS A3 Trademark Acknowledgement llsssssssssssss esses A3 Important Safety Information 0 0 ccc eee cece ee 2 ane nS aca ayo tte ee al a a EAE nim saab ne he 2 Installation Included in this Package 0 cece eects 3 Installatior o xar e a Re REX dE ERE E 4 Operating Your Handset fey Gettifnig otart d aoo erm tech SEO E E PR ERE E Rode RE 6 Common MR F300 Functions 000 cece eee eee ee eee 7 Operation sao rp err PRETI ERU re ens 11 Customizing the MR F300 0 cece cece eee nee eee 16 2a Warranty VUE WICUT MEER MERI EET EE ects tet armies 23 R Product Service Maintenances ds e bun iso e ob toe bn s oe but dio e s 24 Product Senit ss quus taz PD Pemediuce gea 24 Nothing Comes Close to a Cobra 7 emi lnalete Introduction Marine Communication and AGCO mama e c Lele Installation Important Safety Information Before installing and using your Bluetooth handset please read these general precautions and warnings Warning and Notice Statements To make the most of this Bluetooth handset it must be installed and used properly Please read the installation and operating instructions carefully before installing and using the handset Special attention mus
4. fiel English Nothing Comes Close to a Cobra Operating Your Handset Operating Your Handset NOTE If corrections are needed before saving the entry press the Left or Right Arrow Function button to move the cursor to the character that is to be changed and press the Delete Function button to remove that character Then scroll the list to select the correct character nore A double click on the Delete Function button will remove the entire entry and return the cursor to the initial position after Name Phonebook Edit To Edit an Existing Name or Phone Number 1 Select Phonebook from the Menu function scroll down to name or number to be edited and press the Edit Function button to arrive at the screen shown 2 Use the Right and Left Arrow Function buttons to move the cursor to the character s to be changed and proceed as described for making corrections when entering a new name or number 3 Press the Save Function button to save the changes or deletion and go back to the Phonebook function NANE BILL ANDERSON PA Output If during installation you have connected the CobraMarine Bluetooth handset connection cable to your vessel s stereo AUX input you can allow the handset to be used as a public address microphone Enable Use of To Enable Use of Auxiliary Speakers Auxiliary Speakers 1 Select PA Output from the Menu function to arrive at the screen shown 2 Press the On or Off Function b
5. Dash i LO i Installation Connecting Power to the Bulkhead Connector Cord Your Bluetooth handset is powered from your vessel s 13 8 volt DC system 12 volt nominal A fused power connection lead is provided at the opposite end from the bulkhead connector fitting 1 Attach the black wire to a negative ground 2 Attach the fused red power wire to the positive side of the vessel s 12 volt DC power system Connecting to the Bulkhead Connector Cord 1 Ampere Fuse 3 5 mm Female Jack USB B Male Type A J n Bulkhead Nut O or Dash ni d or Dash Nut Q j mi ie mix um O Bulkhead pm Ay f 9 Bulkhead Connector O f Connector Q 7 1 O OE Gasket Pu i O G Gasket Q M Dust Mounting Plate Dust C Cap and Screws J A Cap If the dash is thin enough the flange can be at the back surface of the dash and the threads project out the front If the dash is thick the threaded part of the Male Bulkhead Connector will project through the Mounting Plate and the hole in the dash will be big enough for the flange at the base of the threads to be right up behind the Mounting Plate Installing the Hanger Bracket 1 Install the hanger bracket on a vertical surface near the bulkhead connector using the supplied stainless steel screws Hanger Bracket Connecting Optional
6. scroll the list using the Up and Down Arrow buttons Once the pointer at the left of the screen is positioned at the option you want press the Enter button to select it and C C3 3 C3 C3 J advance to its screen To Adjust the Screen Brightness 1 Select Brightness from the Display mode to advance to BRIGHTNESS ADUUS the screen shown HIGH 2 Press the Up or Down Arrow or Up or Down Function button to step through the available settings of High Medium Low and Off 3 At the desired setting press the Enter or Save Function button to save the setting and return to Display function To Adjust the Screen Contrast 1 Select Contrast from the Display mode to advance to the screen shown 2 Press the Up or Down Arrow or Up or Down Function button to step through the available settings The range is from a minimum at 0 to a maximum at 16 3 At the desired setting press the Enter or Save Function button to save the setting and return to Display function f20 English VOX To Set Auto Dim On or Off 1 Select Auto Dim from the Display mode to advance to the screen shown 2 Press the Off or On Function button to select the desired condition 3 Press the Enter button to save the setting and return to Display mode NOTE When Auto Dim is set to On the LCD screen backlight will be turned Off after 15 seconds if no button is pressed It will be turned On for 15 seconds following any bu
7. to a Stereo System AUX Input Telephone conversations can be switched from the internal speaker in the Bluetooth handset to the speakers that are part of the boat s stereo system 1 Connect the external stereo system to the handset connector cord with a 3 5 mm male stereo jack This cable is not supplied but can be found at your local audio visual store USB Connector The USB connector shown next to the external stereo jack is used to connect to a personal computer PC to reprogram or update the software in the Bluetooth handset The latest software and update instructions can be found at www cobra com Nothing Comes Close to a Cobra s Operating Your Handset Cy Operating Your Handset Getting Started Refer to the foldout at the front of this manual to identify the various controls and indicators on your Bluetooth handset Most button functions are activated by a momentary press then release In those cases that call for press and hold hold the button down for at least two seconds after it is pressed The PTT button is held down as long as you are speaking into the microphone When using the handset tones will sound to m Indicate an error three beeps m Confirm an action two beeps m Confirm a single button press except the PTT button one beep You can turn the Key Tones Off if you want see page 22 Try It Out Using the Bluetooth handset is the most effective way to learn about it Don t
8. www cobra com on line Frequently Asked Questions T English and Spanish productinfoecobra com e mail MR F300 B For Assistance Outside the U S A 2008 Cobra Electronics Corporation Contact Your Local Dealer or Visit www cobra com 6500 West Cortland Street Chicago Illinois 60707 USA www cobra com o 9 5 a te m E a a r S g Lo E D oh E o S I E S a S Te 5 o 8 E a Nothing Comes Close to a Cobra English English Handset Controls Introduction Introduction CE Manger Back Light ep ED t 71 g Lu power Mode Button Microphone Push to Talk PTT Backlit LCD Screen Function Buttons 0 Escape Enter Button Button Green Phone Red Phone Button Button d 7 Voice Dialing Home 9 Last Number Button Redial Button 6 Down Arrow Button Up Arrow o6 Button Function button effects vary with the mode in which the handset is operating Button functions are A shown directly above them on faa English the LCD screen Backlit LCD Liquid Crystal Display Screen Waiting Incoming Call Connected f a epee Cell Phone Signal mer NNI Disconnected r r a AE cR 7070 n n n e eese Outgoing Call eeu Missed Call Pointers ina sesso lleesecn Level Product Features Widely Compatibl
9. Our Thanks to You and Introduction Our Thanks to You Thank you for purchasing a CobraMarine Bluetooth Handset Properly used this Cobra product will give you many years of reliable service How Your CobraMarine Bluetooth Handset Works This handset allows use of mobile telephones cell phones afloat while protecting them from potential damage in the marine environment Bluetooth wireless technology allows voice and data transmission over short distances by means of a radio link Using that technology the Bluetooth handset allows your cell phone to be turned on and stowed in a waterproof and protected location on the vessel Calls are then made and received using the B uetooth handset on deck or in the cabin of your boat o4 Customer Assistance Customer Assistance Should you encounter any problems with this product or not understand its many features please refer to this owner s manual If you require further assistance after reading this manual Cobra Electronics offers the following customer assistance services For Assistance in the U S A Automated Help Desk English only 24 hours a day 7 days a week 773 889 3087 phone Customer Assistance Operators English and Spanish 8 00 a m to 6 00 p m Central Time Mon through Fri except holidays 773 889 3087 phone Questions English and Spanish Faxes can be received at 773 622 2269 fax Technical Assistance English only MARINE BLUETOOTH HANDSET
10. bra s expense if the product is repaired or replaced under warranty This warranty gives you specific legal rights and you may also have other rights which may vary from state to state Exclusions This limited warranty does not apply 1 To any product damaged by accident 2 In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs 3 If the serial number has been altered defaced or removed 4 If the owner of the product resides outside the U S A All implied warranties including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty Cobra shall not be liable for any incidental consequential or other damages including without limitation damages resulting from loss of use or cost of installation Some states do not allow limitations on how long an implied warranty lasts and or do not allow the exclusion or limitation of incidental or consequential damages so the above limitations may not apply to you For Products Purchased Outside The U S A Please contact your local dealer for warranty information or visit www cobra com Nothing Comes Close to a Cobra 23 Maintenance an Product Service Maintenance Very little maintenance is required to keep your CobraMarine Bluetooth handset in good operating condition W Keep the handset clean by wiping with a soft cloth and mild detergent Do not use solvents
11. duct conversations during a call However there may be times you want to suspend the Bluetooth pairing and continue part or all of the call on your cell phone itself To Change Between Handset and Cell Phone Modes 1 Press the Mode button to switch the call to your cell phone 2 Talk and listen to your cell phone in the usual way The handset will be inactive 3 Press the Mode button to restore operation to the handset 4 Talk and listen to the call on the Bluetooth handset Nothing Comes Close to a Cobra Operating Your Handset Operating Your Handset VOX The VOX function converts the handset microphone s pickup of your voice from being controlled by the PTT button to being activated by your voice When VOX is On the PTT button does not need to be pushed to transmit your voice and you can just speak into the microphone When VOX is Off you need to push the PTT button while speaking To Change Between VOX On and Off 1 Press and hold the Mode button for two seconds while a call is in progress NOTE When the VOX function is On in noisy environments the caller connected to the F300 might hear some of your background noise Back Light Lock This button serves two functions m To turn the display back light On and Off m To lock and unlock most of the buttons on the handset Back Light A light is provided behind the LCD screen to improve visibility of the information provided there However you can turn the
12. e Key Lock Links with most B uetooth enabled Prevents accidental operation or setting cell phones changes when key lock is set Intuitive Operation Backlit LCD Screen Handset is similar to CobraMarine Allows adjustment of brightness and radio microphones for easy operation contrast for legibility in all light conditions Illuminated Buttons Allows high visibility of all function buttons Submersible Meets JIS7 submersible standards Noise Cancelling Microphone Reduces effect of environmental Phonebook noise when speaking Allows storage of name and number External Audio Output entries Allows connection of the F300 to Call Log your stereo s AUX input Displays data on the most recent calls including sent received and missed Trademark Acknowledgement Cobra CobraMarine Nothing Comes Close to a Cobra and the snake design are registered trademarks of Cobra Electronics Corporation U S A Cobra Electronics Corporation and MicroBlue are trademarks of Cobra Electronics Corporation U S A The Bluetooth word mark and logo are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Cobra Electronics Corporation U S A is under license Other trademarks and trade names are the property of their respective owners English ar Introduction e Introduction Qur THANKS tO YOU sne renner cennere nenaon nE EERE TEE E A1 Customer Assistance 0 0 0 0 ccc cece eee eee n A1
13. e list consists of the letters A to Z followed by the numbers 0 to 9 followed by space and and it will wrap around from to A Menu The customizable features on your handset are reached from the Menu mode To begin customizing your handset press the Menu Function button in Standby mode to arrive at the screen shown PHONEBOOK CALL LOG BER The Menu options list appears on the screen NOTE rm The complete list is S aa oo If only a number without a name is to be entered m Phonebook m Call Log at step 3 press the Right Arrow Function button until m Dial By Number m PA Output the cursor moves to the first character of the number m Bluetooth Phone Setup m Settings and jump to step 7 m Exit 4 When the first character appears above the cursor press You can scroll through the list one entry at a time by the Enter or PTT button to save the character and move use of the Up and Down Arrow buttons the blinking cursor to the right Once the pointer at the left of the screen is positioned at the 5 Repeat step 4 until the entire name has been entered option you want press the Enter button to select it and 6 Continually press or press and hold the Right Arrow advance to its screen Function button until the cursor moves to the first character of the Number 7 Enter the phone number in the same fashion as the name 8 Press the Save Function button to save the entry and go back to the Phonebook function
14. ell Phone to Another 1 Select Switch on the Phone Setup screen to advance ce yeaa to the screen shown JANE DOE 2 Use the Page Up and Page Down buttons to shift up eae and down the list of entries three items at a time 3 Use the Up and Down Arrow buttons to scroll the pointer at the left of the screen to the cell phone which you want to make active 4 Press the Enter button to begin the process of re pairing to the selected device Nothing Comes Close to a Cobra 15 A Operating Your Handset Operating Your Handset Phonebook Entries Customizing the MR F300 H The Operati tion described usi Phonebook entry to dial tgoi Il Your CobraMarine Bluetooth handset allows you to customize its operation to match ee Faas ende ERES pios apu in aene uae DAS DUDERDIUI tee your preferences Features you can adjust have the following defaults when the unit is new or after a reset To Enter a New Name and Phone Number m VOX Off Display Contrast 8 49 15555882300 1 TAN ipei and PA Output Off m Button Tones On anna ona d s an ESORDIO eaS aa ME high z Aea da 2 Press the Enter or New Function button to advance ing Tone olume 9 to the Phonebook Edit mode m Call Log cleared m Auto Dim Off L ooog 3 Press the Up or Down Arrow button to scroll the m BT Device List cleared m BT Region USA and EUROPE alphanumeric list to the first character of the Name Enter a New Name and Phone Number NOTE Th
15. en without dashes or other separators Dialing a Number Nothing Comes Close to a Cobra 13 Operating Your Handset Bluetooth Phone Setup and Switching The CobraMarine Bluetooth handset can be paired with only one device at a time However it can store pairing information on up to eight different devices To Begin Phone Setup or To Switch To Pair With a Different Device re 1 Press the Menu button in Standby mode then select the DISABLE Bluetooth Phone Setup mode to arrive at the screen shown SUITCH 2 At this screen use the Up and Down Arrow buttons to move the pointer to the desired function Then press the Enter button to select the function and advance to its screen New New can be used to add a device to those already paired or to pair a device if you did not do so at the initial Power On of the F300 Add a New Cell Phone To Add a New Cell Phone 1 Select New on the Phone Setup screen to advance READY FOR PAIRING to the screen shown TO YOUR PHONE E PASSUORD IS 0000 2 Follow the cell phone s instructions to search for available oe RORIS pairing with another Bluetooth device This can often be found in the Tools or Settings menu of your mobile phone 3 Wait for the pairing process to complete You will then see a confirmation of successful pairing or a notice to try again if pairing did not occur The newly paired cell phone will become the active one that is used for calls unti
16. hesitate to explore functions and add entries to see how they work Do not be concerned if you make mistakes They can all be undone in Edit mode Or you can reset the unit to the original factory default condition Push and hold the Green Phone and Home function keys then push the Power key until the unit turns On NOTICE Resetting the unit will clear ALL Bluetooth device pairings as well as the Call Log Phonebook and Bluetooth device list fe English Common MR F300 Functions The following procedures define common operating functions of the handset Power On Off Press the Power button at the top of the handset for two seconds to turn it On or Off The first time you turn On the CobraMarine Bluetooth handset you will see a message that the unit is ready for pairing with a cell phone The message also provides a password If you do not want to pair a device right away press the Escape button to go to Standby mode When the unit is subsequently turned On it will search for the currently selected Bluetooth device and go to Standby mode Mode This button serves two functions m To change the mode of operation between the Bluetooth handset and your cell phone itself m To switch voice activation of the microphone between On and Off Turn VOX On if you want to operate in a hands free mode similar to a Bluetooth handset Mode Normal operation of the CobraMarine Bluetooth handset uses its internal microphone and speaker to con
17. l you Switch to another Delete Delete is used to remove the pairing information for a device from the handset memory Delete a Cell Phone To Delete a Cell Phone 1 Select Delete on the Phone Setup screen to advance pen TUN to the screen shown UFES PHONE 2 Use the Page Up and Page Down buttons to shift up Poa PEW DE and down the list of entries three items at a time 3 Use the Up and Down Arrow buttons to scroll the pointer at the left to the screen to the desired entry 4 Press the Delete Function button to remove the device from the list English Operating Your Handset Disable Disable prevents pairing with a device but does not remove it from the list or its pairing data from the handset memory Disable a Cell Phone To Disable a Cell Phone 1 Select Disable on the Phone Setup screen to advance gt BILL ANDERSON to the screen shown Pe ane 2 Use the Page Up and Page Down buttons to shift up a mv j and down the list of entries three items at a time 3 Use the Up and Down Arrow buttons to scroll the pointer at the left to the screen to the desired entry 4 Press the X Function button to disable an available device or to enable a disabled device An X at the right of an entry indicates that it is in disabled status Switch The Switch function allows you to select which device will be used for calls from the list of those available Switch From One Active To Switch From One Active C
18. light On or Off at will To Turn the Back Light On or Off 1 Press the Back Light Lock button Lock The Lock function disables the operation of all buttons except PTT Back Light Lock and Power buttons When Lock is On accidental presses of any of the other buttons are ignored by the unit A call can be continued if it was started before Lock was turned On but new calls cannot be made or answered when Lock is On To Turn Lock On or Off 1 Press and hold the Back Light Lock button for two seconds fs English Push to Talk PTT This button serves two functions m To activate the handset microphone during a call when VOX is Off This is similar to the action of such a button on a CobraMarine VHF or a CB radio m To activate the handset microphone for a PA announcement the unit must be in Standby and be connected to the stereo s AUX input with the stereo in AUX mode To Activate the Handset Microphone During a Call 1 After placing or accepting a call press the PTT button and talk into the handset microphone To Make a PA Announcement 1 When the unit is in Standby mode press the PTT button and talk into the microphone NOTE Before a PA announcement can be made m The PA function must be turned ON from the settings menu m The F300 must be connected to the stereo system AUX input m The stereo must be in AUX mode with the stereo s volume adjusted Green Phone Button This button acts just like the green phone b
19. on Buttons The Function buttons provide different utilities to different modes of handset operation In any mode the active functions are shown directly above the buttons on the display screen as shown in this Standby display In this example pressing the second button from the left will display the Menu Jeee Function Names eMe Function Buttons fiol English Operation Once the CobraMarine Bluetooth handset has been paired with a cell phone incoming calls can be answered and outgoing calls can be made Standby While waiting to receive or make a call the handset will be in Standby mode Standby Mode The upper part of the screen shows the Waiting For A Call icon and the cell phone signal strength The Function buttons from left to right will activate display of the Volume screen the Menu screen the Call Log screen and the Phonebook screen The Up and Down Arrow buttons will also adjust handset speaker volume directly while in Standby or during a call PRIRED TO yyy Incoming Call When the active paired cell phone receives a call the ring tone will sound and it will be announced on the handset screen Ringing The call can be answered by pressing either the Answer Function button or the Green Phone button If the Ignore Function button is pressed the call will not be accepted but will be recorded in the Call Log Answered Call The Mute Function button will disable the microphone but allo
20. only the party you call will be able to hear you Additionally cellular telephones may have limited coverage over water and can be hard to locate If you do not know where you are the Coast Guard will have difficulty finding you if you are using a cellular telephone However cellular telephones can have a place onboard where cellular coverage is available to allow social conversations and keep the marine frequencies uncluttered and available for their intended use Included in this Package You should find all of the following items in the package with your CobraMarine Bluetooth handset Operating Instruction Manual Nothing Comes Close to a Cobra Installation Installation Before using your Bluetooth handset the bulkhead connector cord must be installed on your vessel and connected to a 12 volt DC power source Installing the Bulkhead Connector Cord Choose a convenient location for the connector near where the Bluetooth handset will be used Keep in mind that the nine foot long coiled cord on the handset must be attached to the connector when the handset is to be used 1 Drill a hole through the bulkhead or dash in the chosen location 7 8 inches for a thick dash or 5 8 inches for a thin dash 2 Install the components as shown in the diagram Installing Bulkhead Connector Cord in a Thick Dash Installing Bulkhead Connector Cord in a Thin
21. or Bluetooth pairing You can select from four regions for handset operation 1 USA Europe 2 France 3 Spain and 4 Japan Most users will not need to change these settings Setting BT Region To Select A Bluetooth Region 1 Select BT Region from the Settings function to arrive at the screen shown 2 Press the Up or Down Arrow buttons or the Up or Down Function buttons to scroll through the list 3 Once the pointer at the left of the screen is positioned at the region you want press the Enter PTT or Save Function button to save the setting BT REGION SET USE EUROPE FRANCE SPRIN Y SAVE f English Limited 3 Year Warranty For Products Purchased In The U S A Cobra Electronics Corporation warrants that its CobraMarine Bluetooth handset and the component parts thereof will be free of defects in workmanship and materials for a period of three years from the date of first consumer purchase This warranty may be enforced by the first consumer purchaser provided that the product is used within the U S A Cobra will without charge repair or replace at its option defective handsets products or component parts upon delivery to the Cobra Factory Service department accompanied by proof of the date of first consumer purchase such as a duplicated copy of a sales receipt You must pay any initial shipping charges required to ship the product for warranty service but the return charges will be at Co
22. or harsh or abrasive cleaners which could damage the case or scratch the LCD screen m f the handset is exposed to salt water wipe with a soft moist cloth at least once a day to prevent buildup of salt deposits which could interfere with button operation m To determine the software version in your handset press and hold the PTT button while turning On the power The version number will show on the LCD screen for five seconds then proceed to normal startup m The USB connector on the bulkhead connector cord can be used to update the software for your handset using a personal computer Go to Cobra s website www cobra com to find the latest software version and follow the instructions there Product Service For any questions about operating or installing this new Cobra product or if parts are missing PLEASE CALL COBRA FIRST do not return this product to the store If this product should require factory service please call Cobra first before sending the product This will ensure the fastest turnaround time on any repair If Cobra asks that the product be sent to its factory the following must be furnished to have the product serviced and returned 1 For Warranty Repair include some form of proof of purchase such as a mechanical reproduction or carbon of a sales receipt Make sure the date of purchase and product model number are clearly readable If the originals are sent they cannot be returned 2 Send the entire product 3
23. t be paid to the WARNING and NOTICE statements in this manual I WARNING Statements identify conditions that could result in personal injury or loss of life NOTICE Statements identify conditions that could cause damage to the handset other equipment or stored data General Precautions The following NOTICES information is important to your operation of the handset FCC NOTICES This device complies with part 15 of the FCC Rules Operation is subject to the following two 2 conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation A NOTICES AVOID using your Bluetooth handset at temperatures below 4 F 20 C or above 131 F 55 C AVOID storing your Bluetooth handset at temperatures below 4 F 20 C or above 158 F 70 C DO NOT attempt to service any internal parts yourself Have any necessary service performed by a qualified technician The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user s authority to operate the equipment fl English Recommendations for Marine Communication The U S Coast Guard does not endorse cellular telephones as substitutes for marine radios They generally cannot communicate with rescue vessels and if you make a distress call on a cellular telephone
24. tton press except PTT The VOX function can be turned On or Off directly with the Mode button as described on page 8 or from the Menu To Set VOX On or Off from the Menu Select VOX from Settings mode to advance to the screen shown Press the Off or On Function button to select the desired condition Press the Enter button to save the setting and return to Settings mode NOTE The VOX On or Off setting will be retained when the unit is turned Off Nothing Comes Close to a Cobra Bi 5 Operating Your Handset Ring Tones Ten different ring tones are available from which to choose Select a Ring Tone To Select a Ring Tone 1 Select Ring Tones from Settings mode to advance to the screen shown 2 Press the Up Arrow or Down Arrow button to scroll through the tones from 01 to 10 3 Press the Play Function button to hear the selected tone 4 Press the Enter or Save Function button to save the tone and return to Settings mode ING TONE SELECT Key Tones Key tones confirm button presses for all but the PTT button Set Key Tones To Set Key Tones On or Off 1 Select Key Tones from Settings mode to advance to the screen shown 2 Press the Off or On Function button to select the desired condition 3 Press the Enter or PTT button to save the setting and return to Settings mode KEY TONES Bluetooth Region Different parts of the world use different sets of radio frequencies f
25. utton on a cell phone Pressing the button answers an incoming call and initiates dialing an outbound call after the number has been entered or selected In Standby mode this button is a shortcut to the Call Log where a number can be selected to call Red Phone Button This button acts just like the red phone button on a cell phone Pressing the button ends an active call In modes other than an active call it backs up to the Standby mode Nothing Comes Close to a Cobra s Operating Your Handset C Operating Your Handset Home Button Pressing this button enables you to return the handset to Standby mode from any other mode Voice Dialing Last Number Redial This button serves two functions m To enable voice dialing m To redial the last number dialed from the handset Voice Dialing You can activate your cell phone s voice dialing feature from Standby mode To Voice Dial A Number 1 Press and release the Voice Dialing Last Number Redial button 2 Say the name or phone number command following the audio prompt The display screen will show the progress of dialing and connecting the call NOTE Your cell phone must have voice dialing enabled and voice commands recorded to use this feature with the F300 To Redial The Last Number Dialed 1 Press and hold the Voice Dialing Last Number Redial button for two seconds The display screen will show the progress of dialing and connecting the call Functi
26. utton to toggle between On and Off condition fial English Settings The Settings option on the Menu provides access to the remaining functions needed to customize your handset To access these functions select the Settings option from the Menu to arrive at the screen shown The Settings options list appears on the screen er IES The complete list is ERBEN SY m Volume m Display m VOX m Ring Tones m Key Tones m BT Region m Exit Once the pointer at the left of the screen is positioned at the option you want press the Enter button to select it and advance to its screen Volume This volume adjustment can be performed on the internal speaker in the handset either from Standby mode or during a call Adjust Handset Volume To Adjust the Handset Volume 1 Select Volume from the Settings function to arrive at the screen shown 2 Press the Up or Down Arrow buttons or the Up or Down Function buttons to adjust the speaker volume The bar graph will show the level you have set 3 Press the Enter or Save Function button to save the volume setting and return to Settings function VOLURE RBUUST Nothing Comes Close to a Cobra Operating Your Handset Display The Display function adjusts the lighting of the LCD screen and includes three separate adjustments Brightness Contrast and Auto Dim To access these functions select the Display option from Settings mode to arrive at the screen shown You can
27. w you to continue to hear the calling person To end the call and return to Standby mode press either the End Function button or the Red Phone button Caller information like name and number of the incoming caller will only be shown if it is available on your network and or device Nothing Comes Close to a Cobra h Operating Your Handset C Operating Your Handset Call Waiting When a second call rings during an active call it will be announced on the handset screen Call Waiting Display To Answer the Waiting Call 1 Press the Answer Function button The waiting call will become active the first call will be put on hold Outgoing Call Outgoing calls can be initiated in three ways m By selecting a Phonebook entry m By selecting a Call Log entry m By dialing the number using handset Function buttons Phonebook After adding a number to your Phonebook you can go to the Phonebook and select it from the available numbers to be dialed To access a number in the Phonebook press the Menu Function button in Standby mode then select the Phonebook mode to arrive at the screen shown Phonebook Number To Select and Dial a Number aan 1 Use the Page Up and Page Down buttons to shift up and NATRLIE down the list of entries ET 2 Use the Up and Down Arrow buttons to scroll the pointer at the left of the screen to the desired entry 3 Press the Green Phone button to call the number Poa Pow NEU

Download Pdf Manuals

image

Related Search

Related Contents

737 Permabond 737  Alfa Romeo Giulia - Alfa    Betriebsanleitung  MODE D`EMPLOI - Sound World Solutions  BDP-V6000 ファームウェアーアップデート手順書  AXE 3 D UNIT 32 R - Lamborghini Calor  IBX Request User Manual  Equip Euro Power Cable, black  Physique Expérimentale  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.