SYBA HDD Tray
Contents
1. of using the HDD ROM2. MRA2Z61 Serial ATA HDD ROM User s MANUAL FC BA Quick Installation Guide Product name MRA261 OS Windows Vista XP 2000 98SE ME Mac9 3 higher Interface Supports SATA 3 0Gb s Fits all 2 5 SATA hard disk Supports hot swap Weight 215 3g Dimensions 134 L X 102 W X 24 H mm Operation Temperature 0 55 C Package Content Accessories Quantity SATA 7P Data Ca rA Switching key Press the two keys from left to right to eject the panels Front panel 1 Switching key 2 HDD front panel 3 HDD LED indicator Rear panel 1 SATA power connector 15P 2 SATA data connector 7P 3 LED access port 4P 1 Remove the slot cover of an empty 3 5 floppy bay 2 Carefully insert the MRA261 HDD ROM into the bay and push it inward until the MRA261 HDD ROM s screw hole is aligned with the hole of the bay 3 Secure the MRA261 HDD ROM 3 is packed with screws use 2 N screws on each side to securely cL hold the device it Age A BH e y ey Connect the HDD ROM cable 1 Insert the SATA15P conn into the MRA261 s 15P conn connect the big power 4P connector to the Pc s 4P power plug and the small 4P LED wire connector to the 4P LED port at the back of MRA261 2 Insert one end of the SATA7P cable to MRA261 another end 7P to either the mother board or the SATARAID card LED 4Pins Data 7Pins Power 15P
3. ins 1 Be sure to connect the 4P LED wire or the LED A indicator will not be lighted up 2 Before connecting the patent 7 15P SATA cable with the PC or with MRA261 HDD ROM please check there is no object on or beside the terminals that may effect the mechanical assembly or become a possible source of an electrical short Install HDD 1 Pull the two keys of HDD ROM gently from left to right to eject the panel 2 Put the 2 5 HDD into the MRA261 and close the front panel 1 After inserting HDD and closing the front door carefully push the tray until it is seated into position Excessive force may damage its mechanical parts 2 If the HDD is inserted backward into the tray forcing the device may damage the MRA261 HDD ROM Eject HDD from the HDD ROM 1 Press the two bottons of HDD ROM gently to eject the panel 2 Open the front panel to take out the 2 5 hard drive and close the upper panel firmly 1 Do not eject the HDD while it is busy 2 Carefully take the HDD out from MRA261 HDD ROM The HDD can reach temperatures over 50 C It will not burn the fingers but should be handled with care Statement The contents of user s manual are protected under copyright law Any organization or individual cannot makecopyand Save it in the information bank or the retrieval system by any method or form without the authorization of Wingsonic Wingsonicis not responsible for any loss in the process
Download Pdf Manuals
Related Search