Strong SRT 56 TV set-top boxe
Contents
1. Service Radio Service Wake up Channel You can select a desired channel as wake up channel Month Date Day Press AW buttons to select your desired month date and day Weekday Use lt P gt to select the day of the week for weekly timers Time Press OK to input the time with the numeric buttons Duration Press OK to input desired duration with the numeric buttons Auto Record Use the lt P buttons to adjust On or Off depending if you want Timer to activate recording via USB port Duration Press OK to input desired duration with the numeric buttons Once you ve made all settings press EXIT A saving window appears with lt P select Yes in the confirmation window and press OK to save or select No to cancel Sleep Timer You can set the receiver to switch to Standby in 10 min 30 min 60 min 90 min and 120 min automatically Additionally the Remaining Time is shown 5 3 5 OSD Setting This menu allows you to change settings for Subtitle Display OSD Transparency and to Load Default OSD Setting Subtitle Display To set the subtitle to DVB Teletext or OFF OSD Transparency To set the OSD transparency from Off 50 OSD Timeout To set the preferred duration for banner display from 5 s 10s Load Default OSD Setting To clear all OSD settings and reset to default values 5 3 6 Parental Lock This menu allows you to protect the installation menu or channels with a password and you can change the Password If you want to ent2. These Instructions Save all safety and operating instructions for future reference Heat Warnings Read carefully and follow all warning labels on the product and those described in the instructions Follow Instructions Follow all instructions provided with this product Cleaning Always unplug this product from the wall outlet before cleaning Use only a damp cloth for cleaning Never use any type of liquid or aerosol cleaner or any type of organic solvent to clean this product Attachments For your safety and to avoid damaging the product use only accessories recommended by STRONG Water and Moisture Never use this product around water near a bathtub kitchen sink laundry tub wet basement swimming pool or in the rain Location To avoid damage to the product and prevent personal injury never place this product on an unstable stand tripod bracket Follow the instructions that describe how to safely mount the product and use only the mounting devices recommended by the manufacturer Power Sources Connect this product only to the power source described on the product label If you are not sure about the type of power supply in your home consult your local power company Refer to instruction pages for information on using the product with a battery Grounding Polarization If this product is used with a specified AC adapter the adapter may be equipped with a polarized alternating current line plug a plug with one blade wider
3. connect external feed No picture or sound on Scart AV is not selected on Switch to correct TV input TV VCR your TV Check mains lead TV or VCR are not connected to main Scrambled channel Channel is scrambled Select alternative channel message No response to remote Receiver off Plug in and turn on plug control Handset not aimed correctly Aim handset at IR sensor IR sensor obstructed Check for obstructions Hand set batteries exhausted Replace handset batteries Forgotten channel lock Re install channels to cancel code channel lock Forgotten menu lock Contact local Service Hotline code or send email to our Support via www strong tv After moving the receiver The aerial feed former new point may Try a direct feed from the to another room you are come through a distribution system antenna no longer able to receive which may reduce the digital signal digital reception now received by the box The receiver switches off Auto Standby function enabled Disable auto standby See automatically section 5 3 8 for details The USB storage device is Wrong formatted Format USB device by receiver in not working properly menu Media gt Disk Format 16 www strong tv PART 1 e English STRONG DIGITAL TV The external USB HDD Power consumption is too high Connect an extra power supply does not start adapter to your USB HDD device A 2 SPECIFICATIONS Demodulator Demodulator 16 QAM 64 QAM QPSK Tra
4. sure that the SCART cable connector and outdoor components www strong tv 3 STRONG PART 1 English DIGITAL TV of the antenna are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow WARNING Indicates warning information EI Tips Indicates any other additional important or helpful information MENU Represents a button on the remote control Bold Character Move to Represents a menu item within a window Italic Character 1 4 Accessories Note m 1 User Manual m 1 Remote control unit with 1 Battery coin cell 3 V m 1 Infrared eye m 1 Power adapter m 1 Mini USB to USB converter cable The batteries should not be recharged disassembled electrically short circuited mixed or used with other types of batteries If rechargeable accumulators instead of batteries will be used we recommend using e g NiMH types with low self discharge to ensure long time operation of remote control 1 5 Usage of external USB devices m It is recommended to use USB 2 0 storage devices If your device is not compatible to USB 2 0 specifications recording playback and other multimedia functions of the receiver would not work properly STRONG cannot guarantee compatibility to all types of USB storage devices It is advised not to store important information on USB storage devices used with th
5. than the other This safety feature allows the plug to fit into the power outlet only one way If you cannot insert the plug into the wall outlet pull it out reverse it and have the receptacle replaced Ventilation Slots and openings In this case are provided for ventilation to ensure reliable operation of the SCART adaptor and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the SCART adaptor on a bed sofa rug or heat register This Scart adaptor should not be placed in a built in installation such as a book case or rack unless proper ventilation is provided Ensure that free airflow is maintained around the Scart Receiver Place the SCART Receiver at least 30 mm from the wall Protecting the Power Cord The power supply cord should be placed so it will not be walked on Never put a heavy object on the power cord or wrap it around the leg of a table or chair Keep the area around the power cord connection points at the power outlet and at the product connection free of all AC adapter or accessory power cords 2 www strong tv PART 1 English STRONG DIGITAL TV GENERAL PRECAUTIONS SAFETY PRECAUTIONS Lightning If a lightning storm occurs while using a specified AC adapter remove it from the wall outlet immediately To avoid damage from unexpected power surges always unplug the AC adapter from the power outlet and disconnect it from the receiver
6. when the receiver is not in use Overloading Never overload wall outlets extension cords power strips or other power connection points with too many plugs Foreign Objects Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points never insert a metal object into the product Avoid using the product where there is a danger of spillage Heat Never use or store this product near any heat source such as a radiator heat register stove or any type of equipment or appliance that generates heat including stereo amplifiers Servicing Refer all servicing to qualified personnel Attempting to remove the covers or disassemble the product could expose you to dangerous high voltage points Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter unplug it from the wall outlet and refer servicing to qualified service personnel 1 Liquid has been spilled onto the product or some other object has fallen into the product 2 The product has been exposed to water 3 The product does not operate normally despite following operating instructions Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product and require extensive repair word by a qualified technician 4 The product has been dropped or damaged in any way 5 The product exhibits distinct change in performan
7. will always display the radio logo at the right preview screen 5 1 3 Delete Favourites and Groups Use this menu to delete all favourite channels Select Delete Favourites And Groups with the AW and press OK with lt P select Yes in the confirmation window and press OK to delete or select No to cancel 5 1 4 Delete all Use this menu to delete all channels Select Delete All with the AW and press OK then enter the Password default 0000 In the confirmation window select Yes with lt gt and press OK to delete or select No to cancel 5 1 5 Group Rename In this menu you can change favourite group name Use the AW buttons to select Group Rename and press OK to enter 1 With the AW buttons select a group and press OK 2 At the appearing Keyboard use the A Y dk buttons to highlight desired letters or numbers and press OK to insert After you entered desired group name highlight OK at the keyboard to confirm 3 Press EXIT button to cancel the group rename 5 2 Installation 5 2 1 Auto Scan 1 Use the A F buttons to select Installation press OK button to enter menu 2 With the AW buttons select Auto Scan press OK to enter the menu 3 Press the lt P buttons to change Scan mode and use the AW to highlight Search press OK to start auto scan 5 2 2 Channel Scan 1 Use the A Y buttons to select Installation press OK to enter the menu 2 With the AW buttons to select Channel Scan and press OK to enter the menu 3 Use th
8. 5 IR Sensor slot To connect IR eye plug 6 DC IN To connect the power adapter plug 5 V DC 2 A 3 1 Remote Control Fig 6 1 09 Turns the receiver On Standby 2 0 9 Channel selection or value input EA Mutes audio output of the receiver 4 RECALL Back to previous shown channel 5 PAGE PAGE Page up down 6 VOL VOL TV mode Volume up down Menu mode navigation amp change settings 7 CH CH TV mode Channel up down Menu mode navigation 8 OK TV mode Displays the current channel list Menu mode Activates the highlighted menu item 9 MENU TV mode Opens the main menu Menu mode You will get one step back Multimedia Go to upper folder 10 EXIT Exits from the menu or sub menu 11 INFO Shows the actual channel information 12 SUB Shows list of subtitle languages www strong tv a STRONG PART 1 English DIGITAL TV 13 EPG Shows the EPG Electronic Program Guide in TV mode 14 Records the TV program to the USB storage device 15 TIMESHIFT Activates the timeshift function 16 lt 4 gt gt Fast rewind Fast forward 17 TTX Shows Teletext on OSD On Screen Display 18 TV RADIO Toggles between TV and RADIO mode 19 AUDIO Shows list of the current audio channel language 20 GOTO Only used to go to desired position in Record Playback mode 21 COLOURED BUTTONS For Multimedia and Teletext functions Fig 7 The remote control transmits a directional infrared beam Be sure to aim the remote control directly at the
9. ING 16 A 2 SPECIFICATIONS 17 See rates item complies with the basic requirements and other relevant w 0180 501 49 97 CE 2004 108 EEC and 73 23EEC za 0 14 Min from German wired line e RoHS 2002 95EEC wm 042 Min max from mobile network S Subject to alterations In consequence of continuous research and development technical C EZ 0820 400 150 See design a See dee Ze change All product names are O 0 12 Min from Austrian wired line STRONG rte ee HH 0826 029928 0 14 Min from French wired line www strong tv 1 STRONG PART 1 o English DIGITAL TV 1 0 INSTRUCTION 1 1 Safety Instructions This SCART Receiver has been manufactured to satisfy international safety standards Please read the following recommended safety precautions carefully The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance Read All Instructions Before you use the product read all operation instructions For more information on accessories such as the lithium ion battery refer to the manuals provided with those products Save
10. STRONG Digital Terrestrial Receiver SRT 56 DIGITAL TV User manual Bedienungsanleitung Manuel d Utilisateur Manuale Utente Manual del usuario Priru nik za upotrebu N vod k obsluze www strong tv 2 0 Optional Antenna es r n p g l Power adaptor Antenna SCART Female to RCA cable wm ww o avi ouT o Antenna DVD Recorder Power adaptor U Antenna Audio Amplifier Projector Fig 6 Fig 5 4 3 635 000 000 0000 9000 0000 0000 0000 0000 0000 90000 0000 0000 9000 2 0000 9000 e 2222 0000 0000 0000 2 0000 2 9000 amp 9000 o000 0000 000 0000 Fig 7 STRONG Dem adaptor Antenna PART 1 e English STRONG DIGITAL TV TABLE OF CONTENTS 1 0 INSTRUCTION 2 1 1 Safety Instructions 2 1 2 Storage 3 1 3 Equipment Set up 3 1 4 Accessories 4 1 5 Usage of external USB devices 4 2 0 CONNECTION 5 2 1 Default Pin Code 0000 5 3 0 YOUR RECEIVER 5 3 1 Remote Control 5 4 0 FIRST TIME INSTALLATION 6 5 0 MAIN MENU 6 5 1 Channel 6 5 2 Installation 8 5 3 Setup 9 5 4 Tools 11 5 5 Media 12 6 0 OPERATION 15 6 1 Changing Channels 15 6 2 Accessing the Electronic Program Guide EPG 15 6 3 Accessing the favourite channels 75 A 1 TROUBLESHOOT
11. an watch the selected channel in full screen mode 6 www strong tv PART 1 e English STRONG DIGITAL TV 5 1 1 1 Edit Use this menu to favour lock skip delete and rename channel list Press numeric button 1 to enter edit menu With the AW buttons highlight a channel and press OK to select or press numeric button 0 to select all channels Selected channels will get marked This way of selection can be executed for each of the edit functions m Favor To add selected channel or all channels to a favourite group press the 1 button Use the A F to select a desired group and press OK With AP select Yes in the confirmation window and press OK to save Selected channels will get marked with folder symbol m Lock To Lock channel or all channels press button 2 with lt P select Yes in the confirmation window and press OK to save Selected channel s will get marked with the symbol m Skip To Skip channel or all channels press button 3 with lt P select Yes in the confirmation window and press OK to save Selected channel s will get marked with the e and will be skipped during channel zapping in full screen mode m Delete To Delete channel or all channels press button 4 with lt P select Yes in the confirmation window and press OK to save m Rename To rename a channel press button 5 A keyboard will appear on screen Use A V db to move the highlight and press OK to enter the highlighted character Once finished mov
12. ce Replacement Parts When replacement parts are required make sure that the authorized service centre uses only parts with the same characteristics as the originals as recommended by the manufacturer Unauthorized substitution of parts could result in fire electrical shock or create other hazards Safety Check Upon completion of servicing or repairs ask the service technician to perform safety checks to determine that the product is in good working order Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on or next to the apparatus Where the mains plug or all pole mains switch is used as the disconnect device the disconnect device shall remain readily operable 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow these instructions carefully m Refer to the user manual of your TV and your antenna m Make
13. e lt P buttons to select one of two Scan Modes By Channel and By Frequency 4 When By Channel is selected use the cursor buttons to select Scan Band and Channel No When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth Switch Network Search to ON or OFF highlight Search and press OK to start scan After Channels are found they will be stored and receiver switches to the first one saved in the list 8 www strong tv PART 1 e English lt DTRONG DIGITAL TV 5 2 3 Antenna Setting Press MENU to enter main menu Use the AW buttons to select Installation press OK to enter the menu With the AW buttons select Antenna setting and press OK to enter Press the lt P buttons to change setting If On is selected the receiver will provide 5 V antenna power for active antennas 5 Press EXIT button to exit AWN 5 2 4 Logical channel numbering If LCN Logical Channel Number is activated and LCN signal is provided by operator then channels will be stored at operator defined order You can activate deactivate the LCN function by setting the Local Channel Numbering to On or Off 5 3 Setup This menu allows you to set OSD Language TV System Region and Time Timer Setting OSD Setting Parental Lock and Auto Standby function 1 Press AW buttons to highlight desired menu and press OK button to enter the setting menus Then press AW buttons to select desired item Settings can be c
14. e and Partition displayed Furthermore the available Capability in GB is shown 2 Press AW buttons to select File System and use lt P buttons to change i between FAT NTFS settings Note Displayed File System depends on the available file system in your USB storage device 14 www strong tv PART 1 English STRONG DIGITAL TV 6 0 OPERATION 6 1 Changing Channels There are 4 ways of channel selection stepping through the channel list selection by number from the on screen channel list and using the electronic programme guide EPG 1 Stepping through the channel list To move through the channel list press the A Y buttons on the remote control 2 Selected by number Enter the channel number directly by pressing numeric buttons and press the OK button to select desired channel Selected by on screen channels list You can also select the required channel directly from on screen channel list This is displayed using the receiver s main menu See chapter 5 1 1 TV Channel list in this manual for operation detail Alternatively you can call up channel list by pressing OK in viewing mode Selected by EPG You can also select the required channel directly from electronic programme guide EPG This is displayed by pressing EPG button on remote control See in the below chapter for operation detail 6 2 Aecassmg the Electronic Program Guide EPG Press EPG button to enter EPG menu i Press numeric button 2 to switch be
15. e receiver Always make backups of data on your USB storage device before using it with this receiver STRONG will not take responsibility for any loss of information or circumstances caused by loss of information Please ensure that either the USB device is already formatted to FAT FAT32 or format the USB device via your receiver refer to chapter 5 5 6 Disk Format for details www strong tv PART 1 English STRONG DIGITAL TV 2 0 CONNECTION Connecting to TV Terrestrial Antenna IR Eye and Main Power Fig 1 To receive the broadcast signal the terrestrial antenna cable should be connected to the ANT IN connector at the receiver Then connect the IR connector into the receiver and make sure it is properly connected to the IR sensor input Afterwards you can plug the power adapter to the main power source 100 240 V 50 60 Hz Auto detecting After all connections are established carefully the IR eye LED must light otherwise the Remote Control will not react Connection to a USB device Fig 2 Connecting to DVD Recorder Fig 3 Connecting to a Projector Fig 4 2 1 Default Pin Code 0000 3 0 YOUR RECEIVER Fig 5 1 SCART PORT To connect to your TV set 2 Mini USB Port To connect your included converter USB cable and then your USB storage device 3 ANT IN To connect an antenna for reception of broadcasting signal support antenna power 5 V DC 4 To TV To connect to the areal input of your TV or to a second receiver
16. e the highlight to OK using AY lt gt and press the OK button to exit and save the changes Ifyou have done all modifications concerning channel editing press EXIT to cancel 5 1 1 2 Find Press the 2 button in to enter Find menu Use the A Y dk buttons to highlight desired letters or numbers and press OK to insert After each character the channel list will search the channel according your input and list the matched channel Press EXIT to quit Find mode 5 1 1 3 Sort Press the 3 button in to enter Sort menu Use the AW buttons to highlight desired sort way and press OK to confirm Default Sorting by searched Order from lowest to highest frequency or in operator defined order in countries where LCN is broadcasted Name A Z Sorting in Alphabetical Order Name Z A Sorting in Alphabetical Order FTA First in the list will be Free To Air channels Lock First will be listed all unlocked and then the locked channels 5 1 1 4 Move Press the 4 button to activate the Move function The selected channel will be marked ina amp symbol use the AW buttons to move the selected channel to the desired position With lt P select Yes in the confirmation window and press OK to save www strong tv d STRONG PART 1 English DIGITAL TV 5 1 2 Radio Channel list Basically the operation of Radio Channel List is the same as in TV Channel List only difference is that in Radio Channel List there is no video information so it
17. er the menu you will be asked to input the password default 0000 Menu Lock Locks the installation menu You can set menu lock to ON OFF Channel Lock Off Manual Age 4 Age 18 New Password To change the password Confirm Password To confirm the new password 10 www strong tv PART 1 English STRONG DIGITAL TV 5 3 7 Auto Standby This option allows you to enable or disable Auto Standby The default setting for Auto Standby is ON The receiver will switch to standby automatically when it doesnt receive commands from the remote control for three hours To avoid the automatic switch off set Auto Standby to OFF 5 4 Tools Press MENU button to enter main menu Select Tools and press OK button to enter tools menu 1 Press AW buttons to highlight the desired menu and press OK button to enter 2 Press EXIT button to exit 5 4 1 Receiver Information This menu displays Receiver information like Hardware Software Build Date and our Web site www strong tv 1 In Tools menu select Receiver Information and press OK button to open receiver information window 2 Press EXIT button to exit 5 4 2 Games This menu allows you to play games Snake and Othello on this receiver 1 Select Games in Tools menu and press OK button to enter game menu 2 Press AW buttons to select a desired game and press OK button to enter the game Highlight Start and press OK button to start the game For changing levels h
18. hanged by pressing lt P buttons You can get better overview if press OK first Now you can select desired setting by AV buttons and confirm it with OK 2 Press EXIT button to exit 5 3 1 OSD Language This menu allows you to set OSD Language 5 3 2 TV System This menu allows to setup different settings concerning your TV set Display Mode PAL NTSC AUTO Aspect Ratio Use this menu to configure the screen aspect between 4 3 PS Pan amp Scan 4 3 LB Letter Box and 16 9 Wide Screen and AUTO Video Output Switch the video output mode either to RGB or to CVBS 5 3 3 Region and Time Here you can set your region and time zone Region This menu is used for changing the region setting GMT Usage This menu is used for usage of GMT The options are Off User Define By Region GMT Offset This menu is valid only when User Define is selected at GMT Usage The GMT offset range is 11 30 12 00 with half hour steps Date Time Date and Time menus are valid only when Offis selected at GMT Usage Press OK then numeric button to change the date and time www strong tv 9 STRONG PART 1 English DIGITAL TV Time Display This menu allow to control whether the time is displayed on screen or not The options are Off On 5 3 4 Timer Setting In this menu you can set a programme timer or sleep timer Programme timer Timer Number You can set 8 timers Timer Mode Off Once Daily Weekly Monthly Timer Service TV
19. ighlight Setup and use lt P buttons 3 Press EXIT button to quit the game Note You can also press OK button to pause playing 5 4 3 Load Factory Default This menu allows you to reset the receiver back to factory settings clear all existed channels Note This option will delete all your settings and channel lists and set your receiver to factory default 1 Enter Tools menu select Load Factory Default and press OK button you are asked to input password 2 Input the correct password using the numeric buttons the default password is 0000 a confirmation window is displayed 3 Select Yes to return back to factory settings and clear all channels Select No to cancel 4 Press EXIT button to exit www strong tv 11 STRONG PART 1 English DIGITAL TV 5 4 4 Software Upgrade 1 Enter Tools menu select Software Upgrade and press OK button Software Upgrade menu is shown 2 Press AW buttons to select Upgrade by Storage item and press OK button you are asked to input password 3 Input the correct password the default password is 0000 Software Upgrade submenu is opened Then select the correct software file and press OK to start Message will be displayed to confirm update process select Yes to confirm or No to cancel 4 Press EXIT button to exit AA WARNING After an update the receiver restarts automatically During this process NEVER discon
20. infrared sensor of the unit during operation If the sensor has been covered or there is a large object between the remote control and the sensor the sensor will not receive the signal The sensor may not able to receive the remote signal when it is exposed to direct sunlight or a strong artificial light fluorescent or strobe light In this case change the direction of the light or reposition the unit to avoid direct lighting 4 0 FIRST TIME INSTALLATION If you use the receiver for the first time the Easy Install menu appears Use the lt gt buttons to change settings for setup of Region OSD Language and Antenna Power and the AW to select Then use the AW buttons to move focus to Search and press OK to proceed with the automatic channel scan 5 0 MAIN MENU In viewing mode you can press MENU any time to enter the Main Menu It consists of following submenus Channel Installation Setup Tools and Media 5 1 Channel 1 Use the AW buttons to select Channel and press OK to enter 2 Use the AW buttons to highlight the desired item and press OK to select 3 Press EXIT to exit Note You can also press OK in TV mode to enter the channel list 5 1 1 TV Channel list 1 In Channel submenu select TV Channel List with the AW buttons and press OK to enter 2 Use the lt P buttons to change channel group assumed you have already set up Favourite groups 3 With the AW buttons select the channel you want to watch With OK you c
21. n port of your receiver Wait a few seconds after the sign for connected device is shown on screen then you are ready to start Time Shift or Record for the broadcasted programme Time Shift Timeshift function allows you to watch a programme in time shifted mode Press the TIMESHIFT button in viewing mode Then you can use the lt P buttons to move the cursor to the desired time which you want to watch afterwards press OK to confirm In case the info banner is not shown you just need to press the INFO button to call it up show again Time Shift and Record To perform this action you have to press the amp button after you started the Time Shift Then a confirmation window appears where you need to select Yes for buffering Time Shift and record the present program If you select No then it will only record the program www strong tv 13 STRONG PART 1 English DIGITAL TV Stop Time Shift If you want to stop Time Shift press EXIT or lt P buttons then a confirmation window appears Select Yes to stop Timeshift or select No to continue Timeshift Record There are 3 different ways to record programmes Instant recording recording from EPG and recording via Timer Instant record In viewing mode press the button to instantly start a record on the current channel Press the RED W button to stop recording If you press the amp button again you can adjust the duration for this record Insert the time with the Numeric buttons a
22. nd press OK to confirm then press EXIT to remove the message From EPG Press the EPG button to enter the programme guide than select an event and channel with the buttons described on screen Press amp button on an event to plan a timer on this event An icon is then displayed besides the planned event If you want to remove the planned record you have to press button again Manual scheduling If you want to set a record manually you can set recording through the Timer menu For details refer to chapter 5 3 4 Timer Setting Note In case the available free space on the USB storage device is not enough recording operation of broadcast will stop Maximum Available Timeshift setting is 1h min 2GB USB devices Available Timeshift settings 10 20 30 40 50 60 min the maximum time is 1h Available Record Type TS PS TS Transport stream which include Teletext Subtitles etc PS Program stream which can be played back by PC or another device A WARNING Please consider that Timeshift needs min 20 MB free space on the USB storage device and an accurate Timeshift function is depending on the speed of the used USB storage device 5 5 5 Safely Remove Storage Device In Media menu select Safely Remove Storage Device and press OK button to safely remove the USB device Then a message is displayed 5 5 6 Disk Format 1 In Media menu select Disk Format and press OK to enter this menu You will see actual used Devic
23. nect the receiver from the main or switch 3 power OFF This can damage your receiver and warranty will void Ei Note This receiver has foreseen an over the air update function which might not be available at your local broadcast conditions For further details visit our website www strong tv or contact your local Serviceline 5 5 Media The Media menu consists of following submenus Media Player Record Manager Removable Disk Information Record Settings Safely remove storage device and Disk Format 1 Press MENU button to enter main menu Select Media and press OK button to enter Media menu 2 Press A Y buttons to highlight desired menu and press OK button to enter 3 Press EXIT button to exit Use the three button rows in bottom of RCU for Player operation Description for further usage of buttons will be displayed on screen 5 5 1 Media Player This function allows you to play MPEG 2 Audio and Photo files from connected storage device When the Media Player is entered a help screen explaining the use of buttons is displayed Please follow the instructions 1 In Media menu select Media Player and press OK button to enter Media Player menu 2 Press AW buttons to select a desired item and press OK or PLAY button to play the desired files 3 Press EXIT button to exit 5 5 2 Record Manager This menu allows you to playback the recorded files 1 In Media menu select Record Manager and press OK button t
24. nsmission mode 2 K 8 K Video Decoder Profile level MPEG 2 MP ML Video resolution 720 x 576 pixels PAL 720 x 480 NTSC Decoding amp Video Out PAL amp NTSC Aspect ratio 4 3 Letterbox 4 3 Pan amp Scan 16 9 Audio Decoder MPEG MusiCam Layer II Sampling rate 32 44 1 48 KHz Audio mode Stereo Joint Stereo Dual Mono Mono Tuner Front End DVB T UHF amp VHF Tuner nput frequency range 174 230 MHz VHF and 470 862 MHz UHF Loop through frequency range 47 862 MHz nput signal level 78 20 dBm Multimedia Video recording and playback MPEG 1 and MPEG 2 encoded mpg Audio playback MP3 and WMA formats Picture view JPEG format STRONG cannot guarantee the playback of external video files which have not been recorded by this device Memory and System Flash memory 1 MByte SDRAM 16 MBytes Connectors ANT IN IEC 169 2 Female TO TV IEC 169 2 Male TV SCART RGB CVBS USB port Type Mini A IR sensor port DC IN 5V 2A DC www strong tv 17 STRONG PART 1 English DIGITAL TV General Data Power source 100 240 V AC 50 60 Hz Auto detecting Power Consumption 3 9 W without external USB device Power consumption in Standby 0 98 W without external USB device Operating Temperature 0 40 C Storage Temperature 30 80 C Operating Humidity Range 10 85 RH Non condensing Size W x Dx H in mm 69 x 137 5 x 20 5 Weight 102 g 26 A
25. o enter Record Manager menu 12 www strong tv PART 1 e English STRONG DIGITAL TV 2 Press AW buttons to select a desired recording and press OK or BLUE P button to playback the desired files 3 Press EXIT button to exit During the playback it is possible to perform the following actions Press YELLOW Il button to pause the playback Press the gt gt 44 buttons for fast forward or fast rewind during playback Press GREEN IP button once to perform slow motion every further press will change the slow motion speed 1 2 1 4 1 8 5 5 3 Removable Disk Information In this menu you can display information about the storage device 1 In Media menu select Removable Disk Information and press OK button to enter this menu 2 Press EXIT button to exit 5 5 4 Record Settings This menu allows you to set the time for Timeshift define Record Type set Standby Mode and Record Recovery 1 In Media menu select Record Settings and press OK to enter this menu 2 Press AW buttons to select a desired item and use lt P buttons to change settings 3 Press EXIT button to exit Timeshift Time min 10 20 30 40 50 60 Record Type TS PS Standby Mode ON OFF defines the standby mode after recording Record Recovery ON OFF defines if an interrupted recording should be recovered e g power breakdown 5 5 4 1 Time shift and Recording functions Please connect your USB storage device in the correct direction to the foresee
26. pr 2010 14 26 18 www strong tv
27. tween channel list events schedule of the selected channel and now next events 3 In the event schedule press 3 button to book the selected event press numeric button OK to open the Detail menu for the selected event 4 Press numeric button 1 to open the Booking list menu 6 3 Accessing the favourite channels 1 Press OK button to enter channel list 2 Press 4 or K cursor buttons to select the desired favourite group 3 Press AW buttons to select the favourite channel w A www strong tv 15 STRONG PART 1 English DIGITAL TV A 1 TROUBLESHOOTING There may be various reasons for abnormal operation of the receiver Please check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact your local Service line or STRONG dealer Alternatively you can send a support mail via our website www strong tv NEVER open or disassemble your receiver This may cause a dangerous situation and will void the warranty IR sensor light not lit Mains lead unplugged multipoint Check mains lead switch connector switched off multipoint connector on Mains fuse blown Check fuse Bad connection of IR sensor plug Check connection No signal found Aerial is disconnected Check aerial lead Aerial is damaged misaligned Check aerial Out of digital signal area Check with dealer Active antenna requires to switch Switch receiver s Antenna ON antenna power external feed Power ON
Download Pdf Manuals
Related Search